home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 21 PDrivers
/
21-PDrivers.zip
/
epsonprt.zip
/
readme.new
< prev
Wrap
Text File
|
1997-01-24
|
3KB
|
81 lines
Update for Printer driver release 1.002 for OS/2 3.0 (Warp) and Warp 4.0
************************************************************************
! This driver is only a update for the existing printer driver release 1.002 !
Changes to the release 1.002:
*****************************
- TrueColor RGB input can switch to 256 color palette mode. The color
adjustment is managed by the operating system and may lead to untrue color
representation
- Bug fixing
Notes on installation:
**********************
Please observe the following when updating the printer driver release 1.002:
Warp 3.0, Warp 4.0
******************
- Run OS/2
- the printer driver release 1.002 must be installed, if not please install at
first this release and reboot your system
- Make sure that all printer queues are empty
- Make sure that no program is started
- select the Icon DRIVES
- double-click on your disk drive
- copy all files into the subdirectory OS2/DLL/EPSONPRT
- The update to release 1.003 is now complete
Known problems
**************
- Stylus COLOR: It is better to avoid using a combination of 360 dpi (no
printer fonts), MicroWeave and Bidi, as these settings
can result in faulty printouts.
- IBM Works and DeScribe: The fonts are not provided with these programs as
the printer fonts are not properly supported.
Fixed problems regarding release 1.002
**************************************
- AmiPro 3.0: You can now activate the printer settings out of AmiPro.
- StarDraw 3.0/3.1: Now the EPSON driver can be selected as standard without
protection fault.
This printer driver has been extensively tested with the kind support of the
OS/2 TEAM. Should you, however, find any errors, we would be glad to hear from
you with the following information:
- Test file
- Exact program information with details of program version and settings used
- Version number of printer driver
- Printer driver settings (all)
- If a general protection fault error occurs, we require a hard copy of the
register settings (warning: a hard copy is also treated as graphics with
TrueColor; the currently activated printer job properties are used)
- E-mail address, if available
- Daytime telephone number
Please send these details to:
EPSON Deutschland GmbH
Technical Support OS/2
Zülpicher Str. 6
40549 Düsseldorf
Germany
Updates
*******
You will find information to possible printer driver updates in the
corresponding file area of our Mailbox:
phone : 0211/5621411
parameter : 8 Data Bit, 1 Stop Bit, no Parity
We wish you every success with your EPSON products.
EPSON Deutschland GmbH, Düsseldorf, 15.11.1996