home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 16 Announce
/
16-Announce.zip
/
296072.zip
/
296072.ANN
Wrap
Text File
|
1996-03-12
|
86KB
|
2,247 lines
IBM Communications Server for OS/2 Warp, Version 4 Part of the IBM Software Server Series
Announced on March 12, 1996
Software Announcement 296072
In Brief . . .
The Communications Server provides communications by combining the
versatile multiprotocol support of AnyNet(R)/2, with the power of
Communications Manager/2. Features include:
o Capacity to grow
- Supports up to 2,000 clients and more than 20,000 simultaneous
host sessions
o Multiprotocol support
- Sockets over SNA Gateway and Access Node
- SNA over TCP/IP Gateway and Access Node
o SNA support
- SNA Gateway support
- SNA Transmission Priority
o A wide range of LAN and WAN connectivity options
o APPN network node, end node, and LEN node support with these new
functions:
- High-Performance Routing
- Dependent LU Requester
- APPC full duplex
o Connectivity Enhancements
- SDLC support for 16 (or more) physical connections
- Two-way simultaneous, full-duplex communications
- SDLC Multipoint Primary Server
- Multiple concurrent host support
- Asynchronous transmission mode (ATM) support (LAN Emulation)
- New IBM and OEM adapter support
o Common programming interface for Communications (CPI-C) 2.0
Enhancements
o Robust 32-bit APIs
-----------------------------------------
For ordering, contact:
Your IBM representative, an IBM Authorized
Business Partner, or IBM DIRECT at
800-IBM-CALL Reference: SE005
----------------------------------------
The IBM Communications Server for OS/2(R) Warp, Version 4
(Communications Server) is part of the IBM Software Server family.
These modular application servers enable you to rapidly implement
client/server applications by using modular server technology that
supports multiple server and client platforms. For an overview of
the IBM Software Servers, refer to Software Announcement 296-071,
dated March 12, 1996.
The Communications Server provides flexible, reliable communications
services that enable OS/2, Windows+ 3.1, Windows 95, Windows NT, and
DOS-based PCs to communicate with S/390(R) and AS/400(R) hosts and
with other PCs.
The Communications Server is a powerful multiprotocol gateway with
capacity for growth. The SNA gateway function supports 2,000
connected workstations and 20,000 host sessions. The Communications
Server includes Sockets (TCP/IP) over SNA gateway and SNA over TCP/IP
gateway capability. You can mix and match SNA- and TCP/IP-based
network protocols as you expand or combine networks. Applications
written to either SNA or Sockets can run without change on mixed SNA
and TCP/IP networks. The Communications Server provides capacity and
flexibility in adapting network support to changing needs.
The Communications Server supports a wide range of LAN and WAN
connectivity options. These include leased and switched telephone
lines, token-ring and Ethernet LANs, and ATM, FDDI, SDLC, X.25, ISDN,
and IDLC protocols. These connectivity options enhance flexibility
to best suit business needs. With the ability to communicate at
speeds up to 2 Mbps, Communications Server can help reduce the cost
of communicating over WANs.
There are also mobile computing capabilities. Applications that use
X.25, SDLC, and asynchronous communications protocols can now be
taken on the road with laptop computers and PCMCIA- and Hayes
AutoSync-compatible modems to provide access to host computers. This
extra degree of freedom enables existing applications to be used in
new mobile environments.
The Communications Server also provides a communications and
networking platform for application developers. It has 32-bit API
support for LUA, APPC, CPI-C, X.25, ISDN, and ACDI protocols. There
is also network node and end node support for Advanced Peer-to-Peer
Networking(R) (APPN(R)). These combine to make the Communications
Server an excellent communications platform for distributed and
client/server applications.
Planned Availability Date: March 15, 1996
(R) Registered trademark of International Business Machines
Corporation in the United States or other countries or both.
+ Trademark of Microsoft Corporation
Other trademarks and registered trademarks are the properties
of their respective owners.
DESCRIPTION
IBM Software Servers
IBM Software Servers, a family of modular application servers, enable
you to rapidly implement client/server applications and extend
application capabilities to meet future business requirements.
To meet today's requirement for software that is easy to install,
use, and operate while working with existing systems, IBM has taken
proven software technology, enhanced it with additional function, and
integrated packaging and simpler terms and conditions.
The IBM Software Servers announced today are:
o Communications Server
o Database Server
o Directory and Security Server
o Internet Connection Server
o SystemView(R) Server
o Transaction Server
o Lotus Notes
Together, these servers represent the widest range of application
servers in the industry.
Refer to the Overview: IBM Software Servers, Software Announcement
296-071, dated March 12, 1996.
As part of the IBM Software Server family, the Communications Server
for OS/2 Warp, Version 4 is available for IBM's OS/2 Warp Server,
Version 4 operating system.
Communications Server key characteristics:
o The Communications Server has proven technology with unequaled
depth-of-function
The Communications Server provides PC-to-Host and PC-to-PC
multiprotocol communications services. It is an open system that
provides full-function, cost-effective support for multiple LAN-
or WAN-attached OS/2, Windows 3.1, Windows 95, Windows NT, or DOS
PCs, to access System/390(R) and AS/400 hosts, through one or more
physical connections to one or more hosts. The Communications
Server provides:
- Capacity to grow.
-- Supports up to 2,000 clients and more than 20,000
simultaneous host sessions
- Multiprotocol support.
-- Allows Sockets applications to communicate without change,
over SNA Networks, or over connected SNA and TCP/IP networks
-- Allows SNA applications to communicate without change, over
TCP/IP networks, or over connected TCP/IP and SNA networks
- APPN network-node, end-node, and APPC support for distributed
applications.
- APPN High Performance Routing (HPR) support to improve the
availability and throughput of your network. HPR gives you
improved network availability through transparent recovery from
network failures, improved network performance through enhanced
error recovery mechanisms, and state-of-the-art congestion
control capabilities for reduced bandwidth requirements.
- Support for a rich set of 32-bit APIs.
- Support for a broad range of LAN and WAN protocols including
SDLC, X.25, IDLC, FDDI, ATM, and Frame Relay (when combined
with RouteXpander/2).
- Remote access to SNA applications over asynchronous,
synchronous, Hayes Autosync, digital, and cellular connections.
- Support for a wide range of adapters and modems.
o The Communications Server protects your investment by working with
your existing systems.
Communications Server protects your investments in existing
Communications Manager/2 (CM/2) installations. Applications
written to the APIs in CM/2 work unchanged with Communications
Server. CM/2 gateway and APPN network installations are easily
migrated to Communications Server through the server installation
process.
Communications Server protects your investments in existing
emulators. The Communications Server supports existing IBM and
non-IBM 3270 and 5250 terminal emulators. For example, IBM
emulator products such as CM/2 and the Personal Communications
family of products will work without change through the
Communications Server.
Communications Server also protects your investment in SNA
communications network support while giving you the freedom to
adapt to changing network needs. It provides multiprotocol
support that enables you to expand the scope of your existing SNA
or TCP/IP network to embrace multiprotocol traffic. Investments
in networking skills, operating procedures, and hardware can be
preserved and leveraged. You can interconnect networks, without
impacting applications, and reduce operational and management
costs at the same time.
o The Communications Server provides a growth path for your systems.
Communications Server works with other IBM Software Servers or
works in a stand-alone environment. Version 4 of the IBM Software
Servers was validated to work together through IBM integration
testing to run on top of IBM OS/2 Warp Server, Version 4. The
testing included short and long runs under stressed environments.
As your business needs grow, you can add other IBM software
servers to complement the communications functions.
Communications Server Packaging
The Communications Server for OS/2 Warp, Version 4 package has a
CD-ROM that contains the following:
o Communications Server
Communications Server is based on the industry-leading CM/2. For
customers with gateway and APPN network node requirements,
Communications Server is the natural migration path from CM/2.
The Communications Server provides the following:
- Multiprotocol gateway support
- Capacity to support up to 2,000 clients and more than 20,000
simultaneous host sessions
- 32-bit OS/2 APIs
- Local and wide area connectivity support
- APPN network node and end node
- SNA network support and systems management
- Installation and configuration support
Communications Server provides the IBM Personal
Communications/3270 for OS/2 Entry Level emulator for
administrative use at the server. It is not to be used in
production and cannot be distributed to workstations attached to
the server. If you need a full-function emulator, the Personal
Communications (PCOMM) Family of emulators is the recommended
migration path.
Access Features
The following is a description of the Communications Server and OS/2
Access Feature function. Communications Server and OS/2 Access
Feature are generally referred to as Communications Server. Unless
otherwise noted, the description of the functionality applies to both
Communications Server and OS/2 Access Feature.
o OS/2 Access Feature: The OS/2 Access Feature provides
multiprotocol support and APIs for OS/2 desktop workstations
connected to the server. The OS/2 Access Feature, combined with
one of the OS/2 PCOMM emulators, provides a powerful combination
of APPC, APPN, and emulation for the OS/2 desktop workstation.
The OS/2 Access Feature provides:
- Multiprotocol access node support (used in conjunction with the
Communications Server multiprotocol gateway support)
- 32-bit OS/2 APIs
- LAN and WAN connectivity support
- APPN end node
- SNA network support and systems management
- Installation and configuration support
The OS/2 Access Feature is an optional feature that is not
required for connection to the gateway.
o Windows Access Feature: The Windows Access Feature provides
multiprotocol support and APIs for Windows desktop workstations
connected to the server. It is a bundle of two products that
provide APPC programming support that enables APPC and CPI-C
applications to run unchanged over either SNA or TCP/IP LANs and
WANs. The products are:
- IBM APPC Networking Services for Windows Version 1.0.1 (refer
to Software Announcement 294-562, dated September 20, 1994)
- IBM AnyNet APPC over TCP/IP Version 1.0 for Windows (refer to
Software Announcement 295-110, dated March 21, 1995)
The Windows Access Feature is optional and is not required for
connection to the gateway.
Communications Server License
The license for the IBM Communications Server for OS/2 Warp,
Version 4 includes a license for:
o The IBM Communications Server for OS/2 Warp, Version 4.
o The OS/2 Access Feature distributed feature.
o The IBM Personal Communications/3270 for OS/2 Entry Level emulator
for use on the IBM Communications Server for OS/2 Warp, Version 4
only. It is not to be used in production and cannot be
distributed to workstations attached to the server.
The license for the IBM Communications Server for OS/2 Warp, Version
4 does not include the right to use the Windows Access Feature. The
Windows Access Feature distributed feature license must be ordered
separately.
The access features are designed for use on desktop machines other
than the Communications Server. These features may be ordered only
after the Communications Server has been ordered or acquired.
Multiprotocol Support
Communications Server and OS/2 Access Feature have incorporated the
versatile SNA over TCP/IP and Sockets over SNA functions from the
AnyNet product family. This support enables you to extend and
simplify your network by allowing SNA applications to communicate
across a TCP/IP network, and Sockets applications to communicate
across an SNA network, without changes to the applications.
Communications Server provides these multiprotocol functions:
o Sockets over SNA
With Sockets over SNA support, Sockets applications can
communicate over SNA networks, or over connected SNA and TCP/IP
networks, without changes to the applications. In addition,
Sockets over SNA users on TCP/IP can benefit from advantages built
into SNA networks, such as cost-effective bandwidth utilization
and predictable response times.
Sockets over SNA support can be used in a variety of ways:
- Sockets applications can run on an SNA network
A user can use Sockets applications, such as FTP, Telnet, and
NFS, across an SNA network, without having TCP/IP connectivity
on the network. An SNA Internet Web site can be browsed from
client workstations with Web browsers.
- Sockets applications can run across connected TCP/IP and SNA
networks
SNA workstation users can access the World Wide Web using any
Web browser, or users on the Internet can access a Web Server
in an SNA network. SNMP agents on a TCP/IP network can send
management data to an SNMP manager, like NetView(R)/6000, on an
SNA network.
- Sockets applications can run between TCP/IP networks connected
by SNA networks
FTP, Telnet, SAP R/3, and Web browser applications can
communicate between two workstations on separate TCP/IP
networks that are joined by an SNA network.
o SNA over TCP/IP
With SNA over TCP/IP support, APPC and dependent LU applications
(for example, printer or emulator applications) can communicate
over TCP/IP networks, or over connected TCP/IP and SNA networks.
You can use SNA over TCP/IP support in these ways:
- APPC applications can run on a TCP/IP Network
APPC applications, such as DB2(R) and CICS(TM), can run over
TCP/IP with no changes to the applications and with no need for
SNA to be on the network.
- APPC applications can run between connected SNA and TCP/IP
networks
APPC applications, such as DB2, on an SNA network can
communicate with DB2/2(TM) applications on a connected TCP/IP
network.
- APPC applications can run between SNA networks connected by
TCP/IP networks
DB2, CICS, and IMS(TM) applications can be used between two
workstations running on two separate SNA networks, which are
joined by a TCP/IP network.
SNA Gateway (Communications Server only)
The Communications Server provides a rich, cost-effective SNA
gateway. The gateway enables multiple LAN- or WAN-attached OS/2,
Windows 3.1, Windows 95, Windows NT, or DOS workstations to access
multiple System/390 hosts through one or more physical connections to
one or more hosts. The gateway is optimized to provide
cost-effective host connectivity by sharing communications resources
such as adapters and physical connections.
Communications Server SNA gateway enhancements:
o SDLC now supports 16 (or more) upstream and downstream physical
connections, and two-way, simultaneous, full-duplex
communications.
o The WAN line speed has been increased to 2.0 Mbps (T1/E1) (or
greater).
o Communications Server can now act as the multipoint primary
control for downstream workstations. This support is for
workstations and devices connected to the server over SDLC, on a
multi-drop line over synchronous adapters such as the IBM Wide
Area Connector (WAC), Multiprotocol Communications Adapter
(MPA/MPCA), and an IBM Real Time Interface Coprocessor (RTIC).
o Dependent LU support across a TCP/IP network with SNA Subarea and
APPN support upstream from the configured gateway.
o Dependent LU support across an SNA network with TCP/IP support
upstream from the configured gateway.
o Automatic host backup links can be defined for automatic
activation should the primary link fail.
Advanced Peer-to-Peer Networking
Communications Server APPN support provides SNA networking facilities
to connect distributed computing applications, peer applications, and
client applications to their servers. These facilities include
directories of partners, route selection, and management services.
APPN provides support to:
o Add, delete, or move nodes within the network with limited system
definition at the affected node, and no other definition at other
nodes.
o Use APIs to automate configuration changes, add network management
capabilities, and use defaults for reducing required system
definition.
o Significantly improve performance of communications between APPC
and CPI-C 2.0 applications, especially in a LAN environment.
o Use the CPI-C interface for enabling greater application
portability across different platforms.
o Use additional debugging tools and sample programs for easily
developing and using APPC and CPI-C applications.
Communications Server APPN function enhancements:
o High Performance Routing
Communications Server provides support for HPR, the advanced, open
technology that quickly and smoothly routes data across a network.
HPR offers advantages not available with other networking
solutions:
- Combines the best features of IP, SNA, Frame Relay, and APPN.
- Increases network availability by non-disruptively rerouting
around network failures.
- Implements state-of-the-art congestion control capabilities for
reduced bandwidth requirements or more efficient use of
existing bandwidth.
- Positions customer networks for a smooth transition to ATM
because it was specifically designed for high-speed
environments.
- Provides an excellent transport for the integration of
multiprotocol traffic.
- Improves network performance.
HPR is an end-to-end, connection-oriented protocol that can be
visualized as a pipe between two nodes. HPR provides capabilities
that optimize communications across the pipe. These capabilities
include:
- Improve network availability through end-to-end connections,
alternate route calculations, and transmission resumption if an
intermediate link or node fails.
- Improve network performance by only performing error recovery
at the endpoints of the network and by selectively
retransmitting only lost or erroneous packets.
- Improve SNA's congestion control by constantly monitoring and
adjusting the amount of data flowing between the endpoints,
ensuring they do not overload.
Communications Server support of HPR provides the following
capabilities:
- Communications Server defined as an APPN node (end node or
network node) can function as an endpoint for an HPR session.
- Communications Server defined as a network node can also
function as an HPR intermediate node.
- Communications Server supports HPR routing over token-ring,
Ethernet, FDDI, LAN/ISDN, and Frame Relay connections.
o Dependent LU requester
Dependent LU requester (DLUR), in conjunction with VTAM(R)'s
dependent LU server (DLUS) function, enables dependent LUs (LU0,
1, 2, 3, and dependent LU6.2) to operate unchanged in an APPN
network, without changing applications. The DLUS establishes an
LU6.2 session with, and provides SSCP services to, the DLUR node.
Any number of dedicated physical units (PUs) can be defined on the
LU6.2 sessions. The Communications Server gateway can then
provide network management access through the dedicated PU to
downstream workstations.
DLUR lets you protect your investment in 3270 emulation and other
dependent LU applications while migrating new applications to
LU6.2 and APPN.
o LU6.2 Sync Point Enablement
Communications Server now has LU6.2 Sync Point support. This
function allows distributed transaction coordinators, such as DB2
for OS/2, to provide products that implement two-phase commit
protocols. These protocols, referred to as Sync Point managers,
can be invoked by an application program to define synchronization
points (sync points) where all changes to distributed resources
are consistently either committed or backed out, even if errors or
failures occur. Sync Point managers make it easier for
programmers to write reliable, distributed applications programs
by reducing the application logic required to recover from
application errors, system failures, and network failures.
IBM has announced the following Sync Point managers built on the
LU6.2 Sync Point Support (refer to Software Announcement 296-021,
dated January 30, 1996):
- Distributed Relational Database Architecture(TM) (DRDA(R)),
Sync Point Manager Support of DB2 for OS/2 Version 2.1.1
- Distributed Database Connection Services (DDCS), for
OS/2 Multi-User Gateway Version 2.3.1
o Self Defining Dependent LU (SDDLU)
Communications Server can now dynamically identify its dependent
LUs to VTAM and eliminate the requirement for a static definition
of dependent LUs in VTAM (for example, no VTAM SYSGEN required).
o SNA Transmission Priority
Communications Server provides the capability to prioritize SNA
traffic for LU0, 1, 2, 3, and 6.2 sessions over LAN and WAN
connections.
o System Services Control Point (SSCP) Takeover
Communications Server provides the capability to keep sessions
active and allow CP name changes when a VTAM/NCP composite node
takes over SSCP sessions currently owned by another VTAM/NCP node.
o CP-CP Session Reactivation
Automatic activation of CP-CP sessions or reactivation of CP-CP
sessions that have failed prevents network nodes from being
detached from the network as long as at least one link is active.
o APPC Full Duplex
APPC now supports full-duplex, logical conversations and
non-blocking verbs for LU6.2 applications. This enhancement
simplifies APPC applications logic and greatly improves
performance.
Programming Support
The following APIs are now available as native 32-bit APIs:
o Asynchronous Communications Device Interface (ACDI)
o APPC
o CPI-C
o Communications Server Kernel Interface
o Common Services
o Conventional LU Application (LUA)
o X.25 API
Communications Server has been tested and provides 32-bit header
files for the IBM C Set++ and Borland C++ programming languages. You
can use other compilers and languages if you develop header files for
them.
Communications Server continues support for all of the 16-bit APIs
available in Communications Manager/2 Version 1.1. These 16-bit APIs
will not be enhanced.
Emulator Support
The terminal emulator previously provided in Communications Manager/2
has been removed. Terminal emulation for administrative use at the
server is provided by PC/3270 for OS/2 Entry Level (PC/3270 Entry).
The PC/3270 Entry emulator supports up to two 3270 display sessions
with a S/390, via Communications Server LUA support. The functions
provided by this emulator are a subset of the functions provided by
the IBM Personal Communications/3270 for OS/2 emulator.
Connectivity Enhancements
o SDLC
SDLC has been expanded to include:
- Use of switched and leased lines at the same time
- WAN line speed up to 2.0 Mbps (T1/E1) or greater
- Coexistence with LAN Distance(TM) product
- Programming of IRQ levels on ISA bus workstations
SDLC has also been enhanced to support 16 (or more) physical
connections and two-way simultaneous, full-duplex communications.
o SDLC Multipoint Primary Server
Communications Server can now act as the multipoint primary
control for downstream workstations. This support is for
workstations and devices connected to the server over SDLC, on a
multi-drop line over synchronous adapters, such as the IBM WAC,
MPA, and ARTIC.
o Automatic Host Backup Link (Communications Server only)
Each primary link can be defined with a secondary or backup link.
This backup link is automatically activated when the primary link
fails.
o ATM
Communications Server supports the TURBOWAYS(TM) ATM 155, 100 Mbps
and 25 Mbps adapters in LAN Emulation mode.
o LAN Physical Connections
Communications Server supports 16 (or more) physical connections
over token-ring, Ethernet, and PC Network.
Shallow and Deep Adapter Support
Communications Server now supports nonprogrammable ("shallow") and
programmable ("deep") adapters for both Micro Channel(R) and ISA-bus
workstations using a set of open interfaces. These interfaces allow
IBM and other vendors to provide connectivity for Communications
Server over ISDN, SDLC, X.25, or other data link controls.
As of March 1996, the following list of vendors have adapters and
drivers that have been implemented to the open device driver
interfaces. These drivers are included on the Communications Server
CD-ROM:
o IBM
- ARTIC
- MPA/MPCA
- WAC
- WAVERUNNER(TM) Digital Modem (driver not on CD-ROM)
o Eicon Technology Corp.
- Eicon Card S51 for X.25, Frame Relay, and ISDN
o Microgate Corporation
- Microgate Digital Services Adapter (DSA) for SDLC and Asynch
The following vendors have indicated they plan to provide device
driver support to the new open adapter interface. You should check
with your vendor or distributor of adapters to find out which cards
they have made available on this interface.
o ARN Informatique
o Atlantis SAT
o Digi International
o Sangoma
o Synaptel
o TELDAT S.A.
PRODUCT POSITIONING
Communications Manager/2 on OS/2, PC/3270, Personal Communications
AS/400 for OS/2, DOS, Windows 3.1, and Windows 95 are the workstation
communications products of choice for many customers.
IBM now has products that represent the natural evolution of this
widely recognized, industry-leading SNA communications software.
These products are:
o Communications Server for OS/2 Warp, Version 4
o IBM Personal Communications Version 4.1 family of products (PCOMM)
that provides powerful client communications for OS/2, DOS,
Windows 3.1, and Windows 95 desktop environments
The evolution from Communications Manager/2 to these products is
represented in this figure:
Communications Server for
CM/2 1.11 OS/2 Warp, Version 4
*-------------*
| | *--------------------------*
|SNA Gateway |-----* | |
| | | | Communications Server |
| | | | -- Multiprotocol Gateway |
| | | | -- APPN NN |
|-------------| |------>| -- SNA API's |
| | | | -- Connectivity |
| | | | |
|SNA APIs |-----* *--------------------------*
|APPN |
|Connectivity |
| |-----* Personal Communications
| | | for OS/2 Version 4.1
|-------------| | *----------------------*
| | | | OS/2 Access Feature |
|Emulation | *------>| -- SNA APIs |
| | | -- APPN EN |
*-------------* | -- Connectivity |
|----------------------|
| |
| PCOMM V4.1 |
| 3270/5250 Emulation |
*----------------------*
CM/2 EVOLUTION
With the introduction of Communications Server, the next phase of IBM
communications support for Multiprotocol Gateway and APPN Network
Node is here. Communications Server is the natural path for CM/2
customers who need an advanced gateway with all-in-one multiprotocol
support, and the other functions described in this announcement.
With the PCOMM family of client products, IBM offers a line of
clients across multiple operating system environments. PCOMM
provides you with 3270 and 5250 emulation, SNA and TCP/IP client
support, and automation tools for your workstations running OS/2,
DOS/Windows, and Windows 95.
PCOMM for OS/2 Version 4.1 is the natural migration path for CM/2
customers who need the advanced emulation capabilities provided in
PCOMM, with APPN and API support for the desktop.
Customers who want APPC, 3270, and 5250 emulation on Windows 3.1 and
Windows 95 should install the Personal Communications Version 4.1
products for those environments.
PUBLICATIONS
The Communications Server Package contains the hardcopy publication
IBM Communications Server for OS/2 Warp, Version 4 Up and Running!
The following Communications Server publication can be ordered
separately from IBM after March 15, 1996. To order, contact your IBM
authorized dealer or marketing representative, or call 800-879-2755.
Order
Title Number
Up and Running! GC31-8189
The following Communications Server publications can be ordered
separately or as a set using bill-of-form (BOF) number SBOF-7015
entitled Programming References.
Order
Title Number
32-Bit ACDI Programming Reference SC31-7182
32-Bit APPC Programming Guide and
Reference SC31-8148
32-Bit Application Programming Guide SC31-8152
32-Bit Conventional LU Application
Programming Reference SC31-8149
32-Bit System Management Programming
Reference SC31-8151
32-Bit X.25 Programming Reference SC31-8150
Developer's Toolkit for ANDIS SC31-7179
Developer's Toolkit for Intelligent
Adapters SC31-7183
CPI Communications Reference
Supplement SC31-8153
Service Point Application Router and
Remote Operations Service Guide SC31-8188
The following Communications Server publications can be ordered
separately or as a set using BOF number SBOF-7016 entitled Planning
and Reference Guides.
Order
Title Number
Network Administration and Subsystem
Management Guide SC31-8181
Command Reference SC31-8183
Glossary SC31-8184
Guide to SNA over TCP/IP GC31-8192
Guide to SNA over TCP/IP Gateway GC31-8193
Guide to Sockets over SNA GC31-8190
Guide to Sockets over SNA Gateway GC31-8191
Message Reference SC31-8185
Problem Determination Guide SC31-8186
Response File Reference SC31-8187
The Communications Server CD-ROM has the following Communications
Server publications in BookManager(R), PostScript, and OS/2 INF view
formats:
o Up and Running!
o Network Administration and Subsystem Management Guide
o Response File Reference
o Command Reference
o Message Reference
o Problem Determination Guide
o 32-Bit ACDI Programming Reference
o 32-Bit APPC Programming Guide and Reference
o 32-Bit Application Programming Guide
o 32-Bit Conventional LU Application Programming Reference
o CPI Communications Reference Supplement
o Developer's Toolkit for Intelligent Adapters
o Developer's Toolkit for ANDIS
o 32-Bit System Management Programming Reference
o 32-Bit X.25 Programming Reference
o Guide to SNA over TCP/IP
o Guide to SNA over TCP/IP Gateway
o Guide to Sockets over SNA
o Guide to Sockets over SNA Gateway
o Service Point Application Router and Remote Operations Service
Guide
These IBM APPC Networking Services for Windows 1.0 publications are
on the CD-ROM in BookManager, and PostScript formats:
o Getting Started
o Administrator's Guide
o Application Programmer's Reference
o Configuration Parameters Reference for Administrators and
Application Programmers
EDUCATION SUPPORT
Education Support Information will be provided by March 15, 1996,
through a separate education announcement.
Call IBM Education and Training at 800-IBM-TEACH (426-8322) for
education catalogs, schedules, and enrollments.
TECHNICAL INFORMATION
Specified Operating Environment
Communications Server Hardware Requirements
Communications Server supports IBM and non-IBM Intel processor-based
workstations supported by OS/2 Warp Server, Version 4 or by
OS/2 Version 2.11, or later. These systems include, but are not
limited to:
o ThinkPad(TM)
o PS/Note(TM)
o PS/1(R)
o PS/2(R)
o PS Value Point(TM)
o PC 300(TM)
o PC 500(TM)
o PC 700(TM)
o Aptiva(TM)
o IBM Industrial Computers
o PC Servers
o PS/55
o Non-IBM workstations, including SMP machines
Workstations must have an Intel 80386SX processor, or higher,
adequate random access memory (RAM), and adequate hard disk storage
capacity. If Communications Server is to be locally installed, the
workstation must also have a CD-ROM drive.
Hard disk storage and RAM capacity required to install and run
Communications Server and OS/2 Access Feature will depend on a number
of factors including:
o The OS/2 configuration
o Other installed user applications
o The Communications Server and OS/2 Access Feature configuration
including which functional portions are installed
The following estimates of Communications Server and OS/2 Access
Feature (exclusive of OS/2) memory and hard disk capacity
requirements are provided as a guide. You should consult
OS/2 documentation and your application documentation to determine
the memory and hard disk storage required for those parts of your
overall installation.
Memory Requirements
o Communications Server memory requirements
- About 4MB RAM for a small gateway configuration with
approximately 20 downstream workstations
- About 10MB RAM for a robust gateway configuration with
approximately 300 downstream workstations
o OS/2 Access Feature requires approximately 3MB of RAM for an APPC,
LUA, or DLUR configuration.
Hard Disk Requirements: Communications Server hard disk requirements
for the base product:
Hard
Component Disk (MB)
Typical Communications Server 18.0
Typical OS/2 Access Feature 11.0
Communications Server base code 9.3
MPTS 5.0
FFST(TM) 0.5
UPM 0.9
Communications Server hard disk requirements for additional features:
Hard
Component Disk (MB)
Configuration Services 4.2
Keylock 0.04
Problem Determination Aids 2.2
Productivity Aids 2.5
Remote Operations 0.4
Subsystem Management 0.8
16-bit Toolkit Samples and Examples 3.9
31-bit Toolkit Samples and Examples 2.4
Communications Server hard disk requirements for documentation:
Hard
Component Disk (MB)
Command Reference 0.15
Documentation -- Administration 1.5
Documentation -- Programming 5.7
Glossary 0.3
Message Reference 1.3
Problem Determination Guide 0.6
Response File Reference 0.4
Up and Running! 0.5
Keyboards: Keyboards are supported via the base operating system for
Communications Server and OS/2 Access Feature.
Printers and Plotters: Printers and plotters are supported via the
base operating system.
Communications Adapters: A Communications Server workstation may
require one or more communications adapters (and appropriate cables).
The workstation may also require a modem for SDLC, asynchronous, or
X.25 communications. The number of slots on a workstation available
for communications may also be affected by the other devices that the
workstation requires.
WAN Communications Adapter Support: Communications Server supports
these WAN adapters:
o For ISA/EISA bus Workstations:
- Eicon Card S51 for X.25, Frame Relay, and ISDN
- IBM Wide Area Connector
- IBM Multiprotocol Communications Adapter for ISA (except BSC)
- IBM X.25 Co-Processor
- IBM WAVERUNNER
- IBM ATM (LAN Emulation)
- IBM ISDN Interface Co-Processor
- IBM SDLC Adapter
- IBM Serial/Parallel Adapter (asynchronous port)
- IBM Realtime Interface Co-Processor Multiport (supported via
RTIC support program)
- IBM Realtime Interface Co-Processor Multiport Model 2
(supported via RTIC support program)
- IBM Realtime Interface Co-Processor Multiport Model 2
(supported as a shallow adapter)
- MicroGate Digital Services Adapter (DSA)
- Coax adapters for LAN over Coax (3174 Peer):
-- IBM Advanced 3278/79 Emulation Adapter
-- IBM 3278/79 Emulation Adapter
-- DCA IRMA 3 Convertible (ISA bus)
-- Advanced 3270 Adapter by Attachmate
- Twinax adapters for LU6.2 applications
-- IBM Enhanced 5250 Display Station Emulator Adapter
o For Micro Channel architecture workstations(1):
- IBM Wide Area Connector
- IBM WAVERUNNER
- IBM ATM (LAN Emulation)
- IBM ISDN Interface Co-Processor/2 Model 2
- IBM PS/2 Dual Asynchronous Adapter/A
- IBM X.25 Interface Co-Processor/2
- IBM PS/2 Multiprotocol Adapter/A (except BSC)
- IBM Asynchronous/SDLC V.32 Modem/A (MPA Card with modem)
- IBM P370 and P390 Adapters
- Realtime Interface Co-Processor Portmaster(R) Adapter/A
(supported via RTIC support program)
- Realtime Interface Co-Processor Portmaster Adapter/A (supported
as a shallow adapter)
- Coax adapters for LAN over Coax (3174 Peer)
-- IBM 3270 Connection (DFT)
-- DCA IRMA 3 Convertible (MCA and ISA bus adapter)
-- Advanced 3270 Adapter/2 by Attachmate
- Twinax adapters for LU6.2 applications
-- IBM S/36/38 Workstation Emulation Adapter/A
-- IBM 5250 Emulation Adapter/A
(1) Because of machine interrupts and DMA usage conflicts, not all
combinations of communications adapters can be used
concurrently by Communications Server.
PCMCIA Adapter Support: The following PCMCIA adapters are supported
on compatible workstations. These cards require the Card Services
support from IBM OS/2 Warp Server, Version 4 or OS/2 2.11, or later,
operating system. These adapters are "hot pluggable" (except for the
LAN adapters):
o WAVERUNNER PCMCIA ISDN or Analog Modem card
o 3270 PCMCIA card for LAN over Coax
o 5250 PCMCIA card for LU6.2 applications
o LAN PCMCIA cards (wired and wireless)
o Modem PCMCIA cards (wired and wireless)
LAN Support through MPTS: Communications Server uses the LAN Adapter
and Protocol Support (LAPS) transport. This support is provided via
the Multiprotocol Transport Services (MPTS) Version 2.00.2 which is
included in the package. MPTS may also be included as part of the
operating system package you are using.
Security: Users are responsible for evaluation, selection, and
implementation of security features, administrative procedures, and
appropriate controls in application systems and communication
facilities. To assist you in this effort, Communications Server has
implemented Session Level Encryption as an optionally configured
function for all LU types. It operates as an exit facility
compatible with the IBM Transaction Security Services (TSS) available
with the IBM 4755 Cryptographic Adapter. The 4755 facility provides
key management and data confidentiality services compliant with the
IBM Common Cryptographic Architecture. Other adapters compliant with
the IBM Common Cryptographic Architecture are also supported.
Users of functions/applications should also rely on the host
application for security, audibility, and control.
Supported Security Adapters
o IBM 4755 Cryptographic Adapter Models 3, 13 (ISA bus)
o IBM 4755 Cryptographic Adapter Models 4, 14 (MCA bus)
o Other adapters compliant with the IBM Common Cryptographic
Architecture
Controllers: Communications Server supports these IBM host
communication controllers:
o IBM 2217 Nways(TM) Multiprotocol Concentrator
o IBM 3172 Nways Interconnect Controller
o IBM 3174 Establishment Controller
o IBM 3274 Control Unit
o IBM 3705 Communications Controller
o IBM 3720 Communications Controller
o IBM 3725 Communications Controller
o IBM 3726 Communications Controller Expansion
o IBM 3745 Communications Controller
o IBM 3746 Communications Controller
o IBM 4702 Processor
o IBM 5294 Control Unit
o IBM 5394 Remote Controller (AS/400)
o IBM 5494 Remote Controller (AS/400)
o IBM 7845 ISDN Network Terminator Extended
o IBM 9370 Telecommunications and Workstation Subsystem Controllers
Protocol Converters: Communications Server supports these protocol
converters:
o IBM 7820 ISDN Terminal Adapter (basic rate)
o IBM 7830 ISDN Terminal Adapter (basic to primary rate)
o IBM 8209 LAN Bridge (Token-Ring 802.2 to Ethernet 802.3)
o IBM RouteXpander/2
o IBM X.25 Xpander/2
Communications Server supports these ASYNC protocol converters for
ACDI APIs:
o IBM 3708 Model 001
o IBM 3710 Network Controller
o IBM 7171 Model 001
o Series/1(TM) (Note: With Yale ASCII Version 2 IUP)
o IBM 3174 Models 51R or 52R
o IBM 9370 ASCII Subsystem
Modems: Communications Server supports these types of modems:
o Asynchronous modems:
- Modems 100% compatible with the Hayes AT command set
- IBM modems that conform to the ITU-T (CCITT) V.24/V.28 (EIA
RS-232-D) and V.35 interface standards
- Non-IBM asynchronous modems are also supported, as well as the
base function of ITU-T (CCITT) V.24 (EIA RS-232-D) standard
data terminal equipment (DTE) to data circuit-terminating
equipment (DCE) interface for asynchronous communications
- Modems that conform to the RS-232-D standard DTE to DCE
interface
o Synchronous modems and CSU/DSU units that support the V.25bis
command set
o Modems 100% compatible with the Hayes AutoSync protocol
X.25 users will require a synchronous connection to the Link Access
Protocol Balanced (LAPB) link. Refer to your network supplier for
the recommended connection type and modem.
Communications Server has added support for a variety of modems
including these cellular modems:
o LAN Home and Away modem
o IBM Wireless Modem for Cellular/CDPD
o AT&T Paradyne Modem
o DataRace RediCARD Modem
o Nokia 121/PT128 Modem
Communications Server provides configuration strings for, and has
been tested with, a variety of asynchronous and Hayes
AutoSync-compatible modems. An updated list of the modems can be
obtained online from the CM/2 section of the OS2DF2 forum on
CompuServe (file name CMMODM.TXT).
Windows Access Feature Hardware Requirements
The IBM APPC Networking Services for Windows Version 1.0.1 and IBM
AnyNet APPC over TCP/IP Version 1.0 for Windows support IBM and
non-IBM Intel processor-based workstations supported by Windows 3.1
or Windows for Workgroups 3.1, or later. These systems include, but
are not limited to:
o ThinkPad
o PS/Note
o PS/1
o PS/2
o PS Value Point
o PC 300
o PC 500
o PC 700
o Aptiva
o IBM Industrial Computers
o PC Server
o PS/55
o Non-IBM workstations, including SMP machines, or any 100%
IBM-compatible system with a minimum 386 processor and 4MB RAM
(8MB recommended).
An appropriate communications adapter is required to support the
selected connectivity type.
Refer to the following IBM Software Announcements for detailed
hardware requirements:
o IBM APPC Networking Services for Windows Version 1.0.1, Software
Announcement 294-562, dated September 20, 1994
o IBM AnyNet APPC over TCP/IP Version 1.0 for Windows, Software
Announcement 295-110, dated March 21, 1995
NLS Support: Communications Server is available in single-byte
character set (SBCS) and double-byte character set (DBCS) versions
and is enabled for several language groups including Latin I (plus
Icelandic), Latin II, and Latin V (Turkey).
Communications Server is available in:
o Brazilian Portuguese
o English
o French
o German
o Italian
o Japanese
o Korean
o Simplified Chinese
o Spanish
For each of these countries/languages listed, Communications Server
supports the following primary and secondary code pages:
Primary Secondary
Country/ EBCDIC PC PC
Language CS/CP CS/CP CS/CP
Albania(2) 500 850 437
Arabic(2) 420 864 850
Belgium/Dutch
/French 500 850 437
Brazil 037 850 437
Bulgaria(2) 1025 865 850
Byer-Russia(2) 1025 866 915
Canada (French) 037 850 863
Czechoslovakia
Czech 870 852 850
Slovak 870 852 850
Denmark 277 850 865
Finland 278 850 437
France 297 850 437
Germany/Austria 273 850 437
Greece(2) 875 869 813
Hebrew(2) 424 862 850
Hungary 870 852 850
Iceland 871 850 861
Italy 280 850 437
Latin America
(Spanish) 284 850 437
FYR Macedonia(2) 1025 855 852
Netherlands 037 850 437
Norway 277 850 865
Poland 870 852 850
Portugal 037 850 860
Romania(2) 870 852 850
Russian 1025 866 850
Spain 284 850 437
Sweden 278 850 437
Switzerland (French) 500 850 437
Switzerland (German) 500 850 437
Thailand(2) 838 874 874
Turkey 1026 857 850
Ukranian(2) 1025 855 850
United Kingdom 285 850 437
Primary Secondary
Country/ EBCDIC PC PC
Language CS/CP CS/CP CS/CP
United States
Former Yugoslavia
Slovenia 870 852 850
Croatia 870 852 850
Bosnia/Herzegovina 870 852 850
Bosnia/Herz Cryllic 1025 855 915
Serbia Latvia 870 852 850
Serbia/Montengr(2) 1025 855 852
(2) These countries/languages require the appropriate OS/2 Warp
operating system.
Communications Server Software Requirements
Operating System: Communications Server operates on OS/2 Warp
Server, Version 4 and OS/2 Version 2.11, or later, including service
packs and translated versions.
Communications Server works with other IBM Software Servers or in a
stand-alone environment. Version 4 of the IBM Software Servers was
validated to work together through IBM integration testing to run on
top of IBM OS/2 Warp Server, Version 4. The testing included short
and long runs under stressed environments.
Host Communications Programs
APPC (LU6.2) Support
Program
Description Number Version
CICS/MVS(R) 5665-403 2.1.2, or later
CICS/VSE(R) 5686-026 2.2, or later
ACF/VTAM(R) for
MVS/ESA(TM) 5685-085 3.4.2, or later
5695-117 4.1, or later
(session security
and session
level encryption)
4.2, or later, for
DLUR/S and/or
AnyNet support
ACF/VTAM for
VM/ESA(R) 5684-095 3.4.1, or later
5654-010 4.2 for APPN and
DLUR/S support
ACF/NCP 5688-231 6.1, or later
5648-063 7.1, or later
APPC/PC (DOS) 6467-038 1.11
RISC System/6000(R)
AIX(R) 5756-030 3.2.1, or later
OS/400(R) 5738-SS1 2.3, or later
5763-SS1 3.0, or later
AIX SNA
Gateway/6000 5765-261 2.1, or later
Communications
Server for AIX 5765-652 4, or later
APPN Support
OS/400 5738-SS1 3.1, or later
ACF/VTAM for
MVS/ESA 5695-117 4.1, or later
(session security
and session
level encryption)
4.2, or later, for
DLUR/S support
4.3, or later, for
HPR support
ACF/VTAM for
VM/ESA 5654-010 4.2 for DLUR/S
support
3174 Controller Configuration
Support C
Program
Description Number Version
AIX SNA
Server/6000 5765-247 2.1, or later
AIX SNA
Gateway/6000 5765-261 2.1, or later
Communications
Server for AIX 5765-652 4, or later
AnyNet Support
OS/400 5738-SS1 2.3, or later,
including
AnyNet/400 APPC
over TCP/IP
AnyNet/400
Sockets over
SNA
ACF/VTAM for
MVS/ESA 5685-085 3.4.2, or later
features APPC over
TCP/IP Sockets
over SNA for
both MVS(R) and
OS/2
5695-117 4.2
features SNA over
TCP/IP Sockets
over SNA for
both MVS and
OS/2 Sockets
over SNA Gateway
for OS/2 only
5695-117 4.3, or later
features SNA over
TCP/IP Sockets
over SNA for
MVS only
AIX SNA
Server/6000 5765-247 2.1.1 and
features 2.1.2, or later
AnyNet/6000
APPC over TCP/IP
AnyNet/6000
Sockets over
SNA
Communications
Server for AIX 5765-652 4, or later
LUA (LU0) Support
IMS DB/DC 5740-XX2 1.2, or later
5665-332 2.1, or later
IMS/ESA(R) DB 5665-408 3.0, or later
5685-012 4.0, or later
5695-176 5.0, or later
CICS/VSE 5686-026 2.2, or later
CICS/MVS 5665-403 2.1.2, or later
CICS/ESA(R) 5685-083 3.2.1, or later
5655-018 4.0, or later
Host Communications Controller Support
Controller ACF/NCP Version NPSI Version
3720 5668-738 5.4, or 5688-035 3.4, or
later later
3725 5668-854 4.3.1, or 5668-719 2.1, or
later later
3745/3746 5688-231 6.2, or 5688-035 3.6, or
later later
5648-063 7.1, or 5688-035 3.7, or
later; later
7.3, or
later
for HPR
support
ISDN Connection Support
The following programs are required for support of the IBM ISDN
adapters:
o IBM ISDN Interface Co-Processor Support Program 1.2, or later
o IBM WAVERUNNER Adapter Support Program
Use of the IBM 7830 Primary Adapter requires the associated licensed
program:
o IBM 7830 ISDN Primary Gateway (5612-195)
Appropriate programs are also required for:
o 3174 Control Unit with ISDN BRI Adapter
o AS/400 with BRI Feature
Network Management: IBM Products
o NetView for OS/2
o NetView 3.1, or later, for HPR support
- for MVS/ESA (5655-007)
o NetView 2.2, or later
- for MVS/ESA (5685-111)
- for MVS/XA(TM) (5685-138)
- for VM/ESA (5756-051)
- for VM (5684-111)
o SystemView for AIX (5765-527)
- Manages OS/2, DOS, and Windows systems among others
o NetView for AIX 3.0, or later (5696-731 or 5696-905)
o NetView DM for MVS 4.0, or later (5685-016)
o NetView DM for VM 2.0, or later (5684-017)
o AIX NetView DM/6000 1.1, or later (5765-196)
o NetView DM for OS/2 2.1, or later (53G3941 or 53G3924)
o Distributed Console Access Facility (DCAF) 1.1, or later
(5621-414)
OEM Products
o Novell NetWare 3.11, or later
o Novell NetWare for SAA(R) 1.3, or later
Windows Access Feature Software Requirements
IBM APPC Networking Services for Windows and IBM AnyNet APPC over
TCP/IP for Windows require Windows 3.1, or Windows for Workgroups
3.1, or later, running in enhanced mode with DOS 5.0, or later.
IBM AnyNet APPC over TCP/IP for Windows requires IBM APPC Networking
Services for Windows (included in the Windows Access Feature) and one
of the following TCP/IP communications products:
o IBM TCP/IP for DOS, Version 2.1.1, with CSD UB10718
o FTP PC/TCP Network Software for DOS/Windows, Version 3.0
o FTP PC/TCP OnNet 1.1 for DOS/Windows
o Microsoft TCP/IP 3.11a for Windows for Workgroups, Version 3.11
o NetManage Chameleon TCP/IP for Windows, Version 4.01
o Novell LAN Workplace for DOS, Version 4.2
o Walker Richer Quinn (WRQ) TCP Connection for Windows, Version 4.01
Refer to the following Software Announcements for detailed hardware
requirements:
o IBM APPC Networking Services for Windows Version 1.0.1, Software
Announcement 294-562, dated September 20, 1994
o IBM AnyNet APPC over TCP/IP Version 1.0 for Windows, Software
Announcement 295-110, dated March 21, 1995
SNA Gateway (Communications Server only)
Communications Server provides a full-function, cost effective SNA
gateway. The gateway enables multiple LAN-attached OS/2, Windows, or
DOS workstations to access multiple System/370(TM) or System/390
hosts through one or more physical connections to one or more hosts.
The gateway is optimized to provide cost-effective host connectivity
by sharing communications resources such as adapters and telephone
connections.
The Communications Server gateway supports:
o SNA protocols LU0, 1, 2, 3, and dependent LU6.2 (APPC). The
gateway also supports LU0, 1, 2, or 3 to an AS/400 host using SNA
pass-through.
o Multiple physical unit type 2.0 (PU2.0) and up to 254 logical
units (LUs) per PU. To increase efficiency, LUs may be dedicated
to a workstation or pooled among workstations.
o Up to 254 concurrently active workstations per LAN adapter to
transparently access one or more System/390 hosts. Implicit
workstation definitions simplify gateway configurations and
management since downstream workstations are not required to be
configured on the Communications Server for OS/2 Warp, Version 4.
o Downstream applications and workstations using standard SNA
connectivity protocols for LU0, 1, 2, 3, and dependent 6.2, and
communicating through an SNA Gateway to a host. The downstream
workstations include Novell NetWare for SAA and Apple Macintosh
SNAps Gateway.
o Dedicated and pooled LU definitions. The LUs defined in the
gateway can be dedicated to a particular workstation or pooled
among multiple workstations. Pooling allows workstations to share
common LUs, which increases the efficiency of the LUs and reduces
the configuration and startup requirements at the host. You can
also define multiple LU pools, each pool associated with a
specific application. When a link is defined through the gateway
between a workstation and the host, the LU is activated when the
session is established and returned to the pool for access by
other workstations when the session is ended.
o Automatic host backup link that enables each primary link to be
defined with a secondary or backup link. This backup link is
automatically activated when the primary link fails.
o Session inactivity management that supports configuration of an
SNA gateway to automatically stop a session after a specified
period of inactivity if there are other workstations waiting.
This procedure helps increase the number of available shared LUs.
o The transmission of network management vector transports (NMVTs)
between the gateway and the host. For example, commands coming
from the NetView program in the host are received in the gateway
and may be passed to and used by another application on the
gateway, such as IBM LAN Network Manager.
Each host views the SNA gateway as an SNA PU2.0 node, supporting
one or more LUs per workstation. As far as the host is concerned,
all LUs belong to the SNA gateway PU. The SNA gateway can have
multiple host connections simultaneously and can direct different
workstation sessions to specified hosts. Only one host (and it
must be on a link with a CP PU) can act as the focal point, and
the CP name is appended to all NMVTs routed through the gateway.
o SDLC now supports 16 (or more) upstream and downstream physical
connections, and two-way, simultaneous, full-duplex
communications.
o The WAN line speed increased to 2.0 Mbps (T1/E1), or greater.
o Communications Server can now act as the multipoint primary
control for downstream workstations. This support is for
workstations and devices connected to the server over SDLC, on a
multi-drop line over synchronous adapters such as the IBM WAC,
MPA, and RTIC.
o Dependent LU support across a TCP/IP network with SNA subarea and
APPN support upstream from the configured gateway.
o Dependent LU support across an SNA network with TCP/IP support
upstream from the configured gateway.
SNA Gateway Summary: The following table summarizes the SNA Gateway
function provided by Communications Server.
Feature Description
Active workstations 2,000 active
workstations
254 per LAN
Adapter (LAN)
128 Virtual
Circuits (X.25)
Simultaneous sessions Over 20,000 tested
Automatic logoff support Yes
Downstream DLC AnyNet (SNA over
TCP/IP)
ATM (LAN
emulation)
Ethernet
PC Network
Token-Ring
SDLC, X.25, and
IDLC (synchronous,
asynchronous,
and AutoSync)
Downstream workstations Any product that
supports standard
SNA connectivity
protocols for LU0,
1, 2, 3, and 6.2
Dynamic additions and
changes Yes
Implicit workstation support Yes
LU pooling Yes
Multiple PU support Yes, 16 tested
Automatic host backup link Yes
Maximum number of LUs 254 per PU
Feature Description
Mode of operation Multiple downstream
PUs transparent to
the host (except
when through DLUR)
Segmenting support Yes
Supported LU types LU0, 1, 2, 3, and
dependent 6.2
Upstream DLC AnyNet (SNA over
TCP/IP)
ATM (LAN
emulation)
Ethernet
Token-Ring
SDLC, X.25, and IDLC
(synchronous,
asynchronous,
and Autosync)
Twinax (for 3270
passthrough)
Contacting IBM
o The Internet
- The Communications Server home page on the Internet has general
product information as well as service information about APARs
and fixes. There are two ways you can get to the home page:
1. In the Communications Server folder, select the Access Home
Page icon
2. Using an Internet browser such as WebExplorer(TM) go to the
following URL:
http://www.raleigh.ibm.com/cm2/cm2prod.html
o The OS2DF2 forum on CompuServe
In addition to a large and active group of users, this forum is
monitored by Communications Server development.
o The OS2CM2 CFORUM
This forum is monitored by Communications Server development.
- In the U.S., access the OS2CM2 CFORUM on the OS2BBS bulletin
board via TALKLINK(TM).
If you do not have access to TALKLINK/OS2BBS, call
800-547-1283. TALKLINK administration personnel will send you
a registration package that lists the available features and
the current subscription rates. You should receive the
registration package approximately two weeks after calling.
Return the necessary documents and TALKLINK administration
personnel will send you a welcome package that contains the
software you need to access TALKLINK/OS2BBS.
IBMLink(TM) customers can register via SMARTLink's new TALKLINK
selection.
If you do not have access to OS2BBS, contact DIAL-IBM helpdesk.
o IBMLink
From IBMLink, you can locate the IBM Communications Server for
OS/2 Warp, Version 4 and Communications Server information APARs,
or create electronic problem reports.
To view the information APARs:
1. Select SIS (Fastpath)
2. In the Service Information Search SISMM1 window, type CM2INFO
as the search argument.
3. In the Change Library selections field, type YES.
4. Select AIX, OS/2, PC-DOS, CAD/CAM, and other products in the
Library Selections SISMM2 window.
The list of information APARs is displayed.
o The IBM PC Company Automated Fax System
Call 800-IBM-3395 (426-3395) from any touch-tone phone and follow
the voice prompts. You can request Document 20077, which contains
an index of the Communications Server and OS/2 Access Feature
information APARs. You can also request a catalog of other
documents that are available.
o IBM Communications Server Online Customer Support
Access this electronic bulletin board to view information APARs
and to obtain APAR fixes. To request that an APAR fix be made
available, leave a message for SYSOP on the bulletin board or call
800-992-4777.
To access the electronic bulletin board:
- Dial 919-543-8200
- Use protocol N81
- Follow the instructions
Entering your first name and last name registers you the first
time you use the facility.
o The IBM Software Solutions Center
In the U.S., Canada, and Puerto Rico, consult the Customer Service
and Support Guide included in the product package.
o The OS/2 Developer's Assistance Program
Call 407-982-4239.
Compatibility: Communications Server protects the your investment in
CM/2 applications by providing upward compatibility for applications
written for the CM/2 component of OS/2 Extended Edition, Extended
Services for OS/2, and Communications Manager/2 (except for EHLLAPI
and SRPI applications).
Communications Server will coexist and interoperate with other
OS/2 applications when run in the same system. Communications Server
will also interoperate with other OS/2 applications that utilize the
Communications Server APIs or utilize the SNA and TCP/IP control and
data interfaces. These products can also interoperate with window
applications that communicate across the network using the
appropriate networking and application protocols.
Communications Server will migrate control files and other pertinent
user-modified information from EE 1.3, ES 1.0, CM/2 1.0, and
CM/2 1.1. Code will be upgraded from the previously listed releases
of CM/2 and AnyNet (except for EE 1.3).
Planning Information
Customer Responsibilities: Problem determination (PD) is a customer
responsibility. PD is an assessment of whether a problem has been
caused by hardware or software. PD is not complete until the cause
of the problem is identified. This assessment includes examination
of available symptoms using the PD procedures documented in the
Communications Server publications.
Problem source identification (PSI) is a customer responsibility.
PSI begins when software is determined to be the source of the
problem. PSI includes tracing the source of the problem to a host
system control program, an application program, or another source.
Assisting the customer with PSI is an IBM service and support
responsibility.
Installability: Communications Server can be installed directly from
a CD-ROM drive or via the Configuration, Installation, and
Distribution (CID) process.
Packaging: The Communications Server package also has the following
materials:
o Up and Running!
o IBM Personal Communications AS/400 and 3270 brochure
o Registration card
o IBM International Program License Agreement
o License Information Booklet
o Service entitlement information card
o Proof of License
Security, Auditability, and Control
When using the System/370 Remote Operations Support (ROPS) for
NetView, and a RUNCMD is issued, all information is transmitted in
the clear and is not secured. This transmitted information may
include the user ID and password. Transmitted information is also
displayed on the screen and is entered in the NetView log. The
display on the NetView operator's screen and in the NetView log can
be avoided by using the NetView suppression character when the RUNCMD
is issued. If passwords are transmitted to the ROPS service, the
user is responsible for securing the NetView terminal and the NetView
logs so that sensitive data is not compromised.
User management is responsible for evaluation, selection, and
implementation of security features, administrative procedures, and
appropriate controls in application systems and communication
facilities.
ORDERING INFORMATION
Orders for new licenses will be accepted now.
Shipments will begin on March 15, 1996.
To order these programs for order type, specify the order type
number, feature number, part number, program name, media, and
quantity.
Program Package: Program media with documentation.
Order
Type Feature Part
Description Number Number Number Medium
Communications
Server for
OS/2 Warp,
Version 4 5801-AAR 0527 33H7328 CD-ROM
Additional License Copies: Authorizes the customer who has a program
package to make a single copy of the program media and printed
documentation.
The authorization is given by providing the customer a Proof of
Entitlement for Additional License -- with Certificate, which has its
own part number and feature number.
Order
Type Feature Part
Description Number Number Number
Communications
Server for
OS/2 Warp,
Version 4,
Additional
License --
1-Pack 5802-AAR 0580 33H7362
Communications
Server for
OS/2 Warp,
Version 4
Additional
License --
5-Pack 5802-AAR 0181 64H2536
Additional License Copies -- Software Advantage Exhibit:
Authorization to make additional license copies begins on the start
date specified in the Software Advantage Agreement. Proof of
Entitlement will be provided monthly.
Order
Type Part
Description Number Number
Communications Server
for OS/2 Warp
Version 4, Additional
License -- Software
Advantage 5802-AAR 33H7363
Distributed Feature Copies: An authorization to copy a distributed
feature is the Proof of Entitlement for Distributed Features.
The OS/2 Access Feature and the Windows Access Feature are designed
for use on desktop machines other than the server machine on which
Communications Server for OS/2 Warp, Version 4 is used. These
features may be ordered only after the Communications Server has been
ordered or acquired.
Order
Type Feature Part
Description Number Number Number
OS/2 Access
Feature,
Distributed
Feature --
1-Pack 5807-AAR 0155 33H7364
OS/2 Access
Feature,
Distributed
Feature --
5-Pack 5807-AAR 0248 64H2537
OS/2 Access
Feature,
Distributed
Feature --
10-Pack 5807-AAR 0249 64H2538
OS/2 Access
Feature,
Distributed
Feature --
50-Pack 5807-AAR 0250 64H2539
Order
Type Feature Part
Description Number Number Number
Windows Access
Feature,
Distributed
Feature --
1-Pack 5807-AAR 0156 33H7365
Windows Access
Feature,
Distributed
Feature --
5-Pack 5807-AAR 0251 64H2540
Windows Access
Feature,
Distributed
Feature --
10-Pack 5807-AAR 0252 64H2541
Windows Access
Feature,
Distributed
Feature --
50-Pack 5807-AAR 0253 64H2542
Distributed Feature Copies -- Software Advantage: When the Volume
Discount Exhibit -- Software Advantage for Workstations applies,
authorization to make distributed feature copies begins on the
agreement start date. Continued authorized use is based on the Proof
of Entitlement for Distributed Features subsequently provided to the
customer.
Order
Type Part
Description Number Number
OS/2 Access Feature,
Distributed Feature --
Software Advantage 5807-AAR 33H7366
Windows Access Feature,
Distributed Feature --
Software Advantage 5807-AAR 33H7367
Documentation: Separate documentation with no media.
Program Package Upgrade: Program media with documentation.
Order
Type Feature Part
Description Number Number Number Medium
Communications
Server for
OS/2 Warp,
Version 4
Program Package
Upgrade from
any IBM or
non-IBM
gateway or
communications
server 5803-AAR 0183 33H7368 CD-ROM
Additional License Copy Upgrade: Authorizes the customer who has a
program package upgrade to make a single copy of the program media
and printed documentation.
The authorization is given by providing the customer a Proof of
Entitlement for Additional License -- with certificate, which has its
own part number and feature number.
Order
Type Feature Part
Description Number Number Number
Communications
Server for
OS/2 Warp,
Version 4
Additional
License Upgrade
-- 1-Pack
from any IBM
or non-IBM
gateway or
communications
server 5804-AAR 0137 33H7369
Additional License Copy Upgrade -- Software Advantage Exhibit:
Authorization to make additional license copies begins on the start
date specified in the Software Advantage Agreement. Proof of
Entitlement will be provided monthly.
Order
Type Part
Description Number Number
Communications Server
for OS/2 Warp,
Version 4 Additional
License Upgrade --
Software Advantage
from any IBM or non-IBM
gateway or non-IBM
gateway or
communications
server 5804-AAR 33H7370
Upgrade Protection (New Product): The following upgrade protection
products are only available under the Software Advantage for
Workstations offering:
Order
Type Part
Description Number Number
Upgrade Protection for
Communications Server
for OS/2 Warp
Version 4
One-Time Charge 5809-AAR 33H7371
Upgrade Protection for
Communications Server
for OS/2 Warp
Version 4
Quarterly Charge 5809-AAR 33H7372
Upgrade Protection for
OS/2 Access Feature,
One-Time Charge 5809-AAR 64H2544
Upgrade Protection for
OS/2 Access Feature
Quarterly Charge 5809-AAR 64H2545
Upgrade Protection (Entitled Customers): Customers who have
previously acquired Software Advantage Upgrade Protection (33H6888 or
33H7075) will automatically receive the program package (33H7328 or
33H7368) after availability.
Program Upgrade
The program package upgrade option allows currently licensed users of
Communications Manager/2 and any other IBM or non-IBM multiprotocol
gateway or server, to obtain the new function for a program upgrade
charge. The program upgrade to Communications Server for OS/2 Warp,
Version 4 will be available March 15, 1996.
Orders will be accepted after the March 12, 1996. These upgrades
will be available through IBM Authorized Personal Computer Dealers
and Industry Remarketers -- Personal Computers certified to market
IBM Authorized Advanced Products. The remarketer will require a
Proof of License for each upgrade ordered. The original Proof of
License is the colored front cover page (inside the hard binder) or
the separate Proof of License page in the program package as
identified by IBM to the remarketer.
Customers can also order upgrades through the local IBM office using
the IBM Personal Software Program Upgrade and Certification Order
Form.
The total quantity of upgrades acquired for a specific program cannot
exceed the total quantity of program packages and/or additional
licenses previously acquired for that program. Proof of License for
upgrade eligibility for additional license upgrades is a copy of this
invoice or previously acquired Proof of Entitlement for Additional
License -- with certificate.
Additional license upgrades can be entered through the local IBM
office using the IBM U.S. Upgrade and Certification Order Form or
ordered through an authorized remarketer.
TERMS AND CONDITIONS
Licensing: The program described in this announcement is licensed
under the terms and conditions of the IBM International Program
License Agreement. A copy of the agreement is included in the
program package.
Additional License: Proof of Entitlement must be acquired.
Distributed Features: Proof of Entitlement must be acquired.
The OS/2 Access Feature and the Windows Access Feature are designed
for use on desktop machines other than the server machine on which
the Communications Server for OS/2 Warp, Version 4 is used. These
features may be ordered only after the Communications Server has been
ordered or acquired.
Software Advantage for Workstations-Upgrade Protection: The
announced program is eligible as an entitled upgrade. Entitled
customers will be provided with a no-charge program package and a
Proof of Entitlement authorizing right to copy equal to the number of
programs protected. Shipment will follow general availability.
Variable Charges Apply: No
Limited Warranty: Yes
Program Services: Program services will be available until March 15,
1998. The statement of service included with the program describes
this service.
Support Line: The Personal Systems Support Line applies.
Complimentary Introductory Support: Not applicable
Volume Orders: For information regarding volume orders, contact your
IBM representative.
The additional licenses, additional license upgrades, and distributed
features included in this announcement are eligible for volume
discounting under the terms of the Software Advantage for
Workstations Agreement and Exhibit.
Guarantee: Yes. The IBM 30-day, money-back guarantee applies.
Authorization for Copy and Use on Home/Portable Computer: Not
applicable for this program.
Program Transfer: Fully transferable
Educational Allowance: A reduced charge is available to qualified
education customers. The educational allowance may not be added to
any other discount or allowance.
CHARGES
Contact your IBM representative for charges information for this
announcement.
(TM) Trademark of International Business Machines Corporation in the
United States or other countries or both.
CALL NOW TO ORDER
To order, you can contact:
IBM Direct: IBM Direct, our national direct marketing organization,
can also arrange to put your name on the mailing list for catalogs of
IBM products.
Phone: 800-IBM-CALL
Fax: 800-2IBM-FAX
Internet: ibm_direct@vnet.ibm.com
Mail: IBM Direct
Dept. SE005
P.O. Box 16848
Atlanta, GA 30321-0848
Reference: SE005
To identify your local IBM Authorized Business Partner or IBM
representative, call 800-IBM-4YOU.
Note: Shipments will begin after the planned availability date.