home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 15 Message
/
15-Message.zip
/
UU991023.zip
/
Uj991022.txt
< prev
next >
Wrap
Text File
|
1999-10-23
|
119KB
|
3,477 lines
comp.os.os2.networking.tcp_ip (Usenet)
Saturday, 16-Oct-1999 to Friday, 22-Oct-1999
+----------------------------------------------------------------------------+
From: kfhue@hotmail.com 15-Oct-99 22:05:05
To: All 16-Oct-99 04:21:28
Subj: Malaysia : TCP/IP set-up.
From: kfhue@hotmail.com
Hi! I am new and has managed to install OS/2 WARP4
(without any fixpack yet)and now intends to install
the TCP/IP but I was immediately put-off by the
confusing set-up prompts.
I have choose the install internet via the modem and
was greeted by the notebook screen- there were so
many -compares to WIN.95.
When I am using WIN.95, my TCP/IP (In Malaysia)is
as follows.
TCP/IP
*Specify an IP address. 202.188.0.133
*Specify name server address.
primary DNS: 202.188.0.133
secondary DNS: 202.188.1.5
*Use IP header compresseion.
* Use default gateway on remote network.
*SERVER CONNECTIONS:
*Type of Dial-up Server.
PPP,WINDOWS95, WINDOWS NT, INTERNET
* ADVANCED IPTIONS:
-log on to network
-enable software compression
* Allowed network protocols
-Netbeu
-IPX/SPX compatible
-TCP/IP.
* my e-mail address is " blueline@tm.net.my"
* my ISP is "www.tm.net.my"
* Domain "tmnet.my"
Can anyone kindly advise me how to set-up
my internet connections?
Most grateful to all who can help.
Thanks.
KFHUE.
Sent via Deja.com http://www.deja.com/
Before you buy.
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Deja.com - Before you buy. (1:109/42)
+----------------------------------------------------------------------------+
From: Spammers@Bite.Me 15-Oct-99 22:22:23
To: All 16-Oct-99 04:21:28
Subj: Re: Apache 1.3.9 with Netscape Roaming Support
From: "Jaime A. Cruz, Jr." <Spammers@Bite.Me>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Thanks, Brian! I didn't want to E-Mail you directly (you do request that you
not receive E-Mail concerning installation or configuration) so I'd hoped
someone here would jump in. The new version of roaming.dll loaded correctly.
Now all I have to do is configure the rest of this thing.
Thanks again!
On 11 Oct 1999 14:58:40 +1000, Brian Havard wrote:
>"Jaime A. Cruz, Jr." <Spammers@Bite.Me> writes:
>
>>Has anyone successfully installed the roaming.dll file for Netscape Roaming
>>support? I followed the directions and copied roaming.dll to the Apache
>>libexec directory, made the appropriate change to the httpd.conf file, but
>>Apache won't start. It ends with an error saying it can't find
>>libexec/roaming.dll.
>
>>I've checked all the obvious things, spelling, capitalization, etc.
>>Everything looks fine, but it still doesn't work. Can anybody help?
>
>Unfortunately it gives that error message when it can't find another dll
>that the dll being loaded requires. It seems that when I built the roaming
>module it ended up with a dependency on pthrdrtl.dll (used by MySQL).
>
>To make it work, either install pthrdrtl.dll in your LIBPATH (it's included
>in the PHP3 module zip) or re-download the roaming module as I've fixed it.
>
>All available at http://silk.apana.org.au/apache/
>
Jaime A. Cruz, Jr.
o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o
o o
o Visit the Nassau Wings Motorcycle Club at: o
o http://www.nassauwings.org/ o
o A Charter Member of the Motorcycle Web Ring! o
o o
o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 5.0 OS/2 for non-commercial use
Comment: PGP 5.0 for OS/2
Charset: cp850
wj8DBQE4B5sjgvzYfxgMc34RAlp9AKCfbq0VDqvQafQsa7So6D8TZkm0XACfXTXx
33F/u3RZulbTg8xH2iMJtKY=
=gF2I
-----END PGP SIGNATURE-----
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Nassau Wings Motorcycle Club (1:109/42)
+----------------------------------------------------------------------------+
From: mgreene@exis.net 15-Oct-99 21:04:20
To: All 16-Oct-99 04:21:29
Subj: Re: sendmail 8.9.1 & Aurora
From: "Michael K Greene" <mgreene@exis.net>
On 15 Oct 1999 05:35:18 GMT, Peter Moylan wrote:
>Grant Bierman <gbierman@fnmail.com> wrote:
>>In <7u4kjk$krq$1@news.monmouth.com>, on 10/14/99
>> at 01:08 PM, Tim Stephen@CIOS.ORG (Tim Stephen) said:
>>
>>>Weasel looks okay but (1) is there support from the author? and (2) it
>
>The author (that's me) spends a lot of time in the OS/2 newsgroups,
>and new versions of Weasel come out from time to time.
>
>>>seems to require that all incoming mail be sorted into a predetermined
>>>list of known user's mailboxes. That is a bad idea in circumstances in
>>>which you want to accept mail generally rather than rejecting mail to
>>>unknown users.
>
>An interesting point. My attitude has been that "unknown user" mail
>should be bounced immediately, so that the sender knows that he's
>addressed it badly. However it would be feasible in principle to
>add an option that says that all mail to unknown users should be
>routed to a special mailbox. You'd also have the opportunity in
>that case to use a smart filter that tried to figure out the most
>sensible destination. I'd never use such an option myself, but I can
>appreciate that others might want it. I'll take a look soon to see
>how easy this would be to implement.
>
>>I run weasel, and after a bit I go it sorted out to accept mail from
>>anyone/anywhere and send it on. Just put in * for acceptable destinations
>>and for acceptable sources, works fine for me.
>
>I wouldn't recommend running it that way. It means that you've
>turned your mail server into an open relay. That's OK if you're running
>a private internet, or something like that, but if you're connected to
>the real internet then the junk mailers will find you sooner or later.
>I'd suggest that you tune the "acceptable sources" to be the purely
>local machines, or the machines belonging to your own users, or
>some variation on that theme.
Ok Peter,
Can I use Weasel to have a 486 sever collect all my various pop3 mails (I
have my personal email and use 2 free accounts for maillists), sort to
folders, and then have them all served to me (main computer) via IMAP? Just
playing around.
>Peter Moylan
peter@ee.newcastle.edu.au
>See http://eepjm.newcastle.edu.au for OS/2 information and software
Michael K Greene <mgreene@exis.net> | OS/2 Warp / Linux / Win95-311
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Exis Net Inc (1:109/42)
+----------------------------------------------------------------------------+
From: info@BackupForDummies.com 16-Oct-99 07:40:10
To: All 16-Oct-99 05:17:17
Subj: www.BackupForDummies.com
From: info@BackupForDummies.com
This is a multi-part message in MIME format.
--------------FE202A708575834E4933A7B7
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
--------------FE202A708575834E4933A7B7
Content-Type: text/html; charset=us-ascii; name="banner.html"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="banner.html"
<html>
<body bgcolor=white>
<!--
comp.os.os2.networking.server,comp.os.os2.networking.tcp-ip,comp.os.os2.network
ing.www,comp.os.os2.programmer.misc,comp.os.os2.programmer.oop -->
<center>
<b>
Year 2000 is coming! This diverse site is a must!
</b>
<br>
<br>
<a href="http://www.backupfordummies.com"><img
src="http://www.backupfordummies.com/banners/B4D.gif" border=2></a>
<br>
<br>
<b>
We apologize if this post is off topic, however we see this as
a service that is necessary for everyone!
<br>
Please direct any complaints to this post to <a
href="mailto:info@backupfordummies.com">info@backupfordummies.com</a>
</center>
<!--
comp.os.os2.networking.server,comp.os.os2.networking.tcp-ip,comp.os.os2.network
ing.www,comp.os.os2.programmer.misc,comp.os.os2.programmer.oop -->
</body>
</html>
--------------FE202A708575834E4933A7B7--
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: www.BackupForDummies.com (1:109/42)
+----------------------------------------------------------------------------+
From: zarembka@acsu.buffalo.edu 16-Oct-99 04:03:14
To: All 16-Oct-99 05:17:17
Subj: Re: Any PostRoad mailer address book conversion programs?
From: Paul Zarembka <zarembka@acsu.buffalo.edu>
I migrated from Postroad to MR2Ice which is still supported and gives
every indication it will continue to me so. There is also an active
listserv for users.
Paul Zarembka
On Wed, 13 Oct 1999 21:06:26, nineveh@wwa.com wrote:
> I have been using PostRoad Mailer almost from the beginning, and I am
generally
> satisfied with it. However, since Innoval exited the OS/2 market, I will
probably have
> to eventually move to another email client (anything out there besides
Netscape
> that is still being supported?)
>
> My question is: how can I export my PostRoad Mailer address book? Any
utilities
> out there? I checked Innoval's site, and didn't find anything.
>
>
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: SUNY at Buffalo (1:109/42)
+----------------------------------------------------------------------------+
From: derek.vance.steel@natureboy.dyn.tj 16-Oct-99 09:21:22
To: All 16-Oct-99 14:29:07
Subj: sendmail
From: derek.vance.steel@natureboy.dyn.tj
Hello NOSPAMshelton@cluboasis.com.
10 Oct 99 22:25, NOSPAMshelton@cluboasis.com wrote to All:
N> From: Shelton <NOSPAMshelton@cluboasis.com>
N> Where can I find some info on how to set up sendmail as a server
in
N> warp4 with no domain ?
http://www.sendmail.org has all the OS version and much
assistance/documentations in using sendmail.
As well you can find the latest version of sendmail for OS/2.
Derek
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Starfire Couriers (1:109/42)
+----------------------------------------------------------------------------+
From: Tim Stephen@CIOS.ORG 16-Oct-99 12:59:29
To: All 16-Oct-99 14:29:07
Subj: Re: How to monitor Bytes Sent/Received
From: Tim Stephen@CIOS.ORG (Tim Stephen)
On Fri, 15 Oct 1999 13:48:10 -0600, Kris Kadela <kris@dgraph.com> wrote:
>
>I think these numbers get reset if you restart the PC so you would need
>to keep a record of previous xfer stats.
>
Yes I know. My question is which one to use.
Thanks.
Tim
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Monmouth Internet (1:109/42)
+----------------------------------------------------------------------------+
From: Spammers@Bite.Me 16-Oct-99 13:47:13
To: All 16-Oct-99 14:29:07
Subj: Apache and roaming access (long)
From: "Jaime A. Cruz, Jr." <Spammers@Bite.Me>
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
AAAAAAAAAAAaaaaaaaaaaaarrrrrrrrrggggggghhhhhhhh!!
This thing is going to drive me to drink!!
I have the roaming.dll module successfully installed (thanks, Brian!).
I've added the following line to my httpd.conf file:
RoamingAlias /roaming x:/apache_1.3.9/roaming
I've created a \roaming subdirectory under my x:\apache_1.3.9 directory
(which is my server root).
In the /roaming directory I've created an .htaccess file that looks like
this:
AuthUserFile x:\apache_1.3.9\conf\.htpasswd
AuthGroupFile x:\apache_1.3.9\conf\.htgroup
AuthName "Roaming Access"
AuthType Basic
<LIMIT GET>
require group roamers
</LIMIT>
My .htgroup file (in the /conf directory) looks like this:
roamers: jaime
I created the .htpasswd file using the htpasswd.exe program in the /support
directory specifying user "jaime" and a password.
I then recycled Apache to bring in all of the changes and it started
successfully. Next, I fired up Netscape and selected the "Edit...
Preferences" notebook. I selected the "Roaming Access" page and checked the
"Enable Roaming Access for this profile", then filled in user name "jaime" in
the "User" field and checked "Remember my Roaming Access password."
On the next page, I checked "HTTP Server" and filled in the Base URL:
http://xxx.xxx.xxx.xxx/roaming/jaime/
I then pushed the "OK" button and shutdown Navigator. When I tried to
restart Navigator, I got prompted for a password. I entered the password I
used for the htpasswd command and got an "Invalid Password" response. The
error_log for Apache has the absolutely useless error message:
[Fri Oct 15 21:51:40 1999] [error] [client xxx.xxx.xxx.xxx] Unauthenticated
user has no access to roaming files for jaime
[Fri Oct 15 21:51:40 1999] [warn] [client xxx.xxx.xxx.xxx] Have you put a
.htaccess file in the roaming directory?
YES! I DID! IT'S THERE!! What in *&^%ing #$@* is wrong with this thing??
Can anybody help before I punt this thing into the highway??
Jaime A. Cruz, Jr.
o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o
o o
o Visit the Nassau Wings Motorcycle Club at: o
o http://www.nassauwings.org/ o
o A Charter Member of the Motorcycle Web Ring! o
o o
o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o_o&o
-----BEGIN PGP SIGNATURE-----
Version: PGPfreeware 5.0 OS/2 for non-commercial use
Comment: PGP 5.0 for OS/2
Charset: cp850
wj8DBQE4B89DgvzYfxgMc34RAku4AJsHBD3BKfaYN1I/uBMa5gsHbYyV8gCfZEac
T/4AswrLiMpPxr+oMdrfsNs=
=lTa9
-----END PGP SIGNATURE-----
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Nassau Wings Motorcycle Club (1:109/42)
+----------------------------------------------------------------------------+
From: no_spam@blah.net 16-Oct-99 17:19:15
To: All 16-Oct-99 16:44:01
Subj: Re: HOWTO: chat scripts?
From: no_spam@blah.net (Charlie)
for some strange reason leaving java running, with all its resource
requirements, all night and day, just doesnt seem like the best way to
do anything to me.....
On Wed, 13 Oct 1999 10:44:35, Tim Timmins <tim.timmins@bcs.org.uk>
wrote:
> ftp://hobbes.nmsu.edu/pub/os2/apps/internet/ftp/client/jsm285r.zip
>
> Brian@webone.com.au wrote:
>
> > JASMINE HAS to be the best way to do this.
> >
> > Look for jsm280r.zip on Hobbes etc.
> >
> > Written in Java it is quick and you can FTP toa server or copy to a disk.
> >
> > Brian
> >
> > <380335B2.EDB694B@powertech.no>, =?iso-8859-1?Q?Bj=F8rn?= Vermo
<bvermo@powertech.no> writes:
> > >Paul Ratcliffe wrote:
> > >
> > >> On Mon, 11 Oct 1999 20:27:02 GMT, Marco Shaw <marco.shaw@nbtel.nb.ca>
wrote:
> > >>
> > >> >I'm new to OS/2 admin. I need to develop a script that gets files
newer
> > >> >than x date, and FTPs all these files to an FTP server, and this must
be
> > >> >done every 4 hours.
> > >>
> > >> You need REXX and a library package called RxSock. This all comes with
Warp 4.
> > >>
> > >
> > >It may also be useful to run SWITCHRX.CMD to change to the new Object
REXX. It has
> > >some new functions which are very useful, such as access to semaphores.
It is also
> > >very fast and convenient to use the container classes (tables, arrays,
queues &c)
> > >to organize the files you need to transmit.
> > >
> > >It is easier to use the REXX ftp API if you do not need all the socket
> > >capabilities.
> > >From the online documentation:
> > >
> > > The REXX FTP API package is contained in the file rxftp.dll. This
dynamic link
> > >library (DLL) must be placed in a
> > > directory listed in your LIBPATH statement in your CONFIG.SYS file. To
use the
> > >functions in the REXX FTP API
> > > package, execute this REXX code:
> > >
> > > rc = RxFuncAdd("FtpLoadFuncs","rxFtp","FtpLoadFuncs")
> > > rc = FtpLoadFuncs()
> > >
> > > To unload the DLL, you should first call the FtpDropFuncs() function,
then exit
> > >all CMD.EXE shells. After exiting all
> > > the command shells, the DLL will be dropped by OS/2 and can be deleted
or
> > >replaced.
> > >
> > >
> > >
> > >>
> > >> >What kind of scheduling mechanism does OS/2 (Warp 4) have?
> > >>
> > >> It doesn't, but there is a choice of Cron-like utilties on Hobbes which
will
> > >> do the job.
> > >>
> > >
> > >It certainly does! I have used the scheduler in the bonus pack for years
with no
> > >problems. It will allow a wide range of different scheduling options
(like every n
> > >days, third wednesday in every month, or whatever).
> > >
> > >It is also possible to do the scheduling in REXX if it is fairly
straightforward.
> > >Your batch control program can be started from the startup folder, and
stay in the
> > >background like any other daemon.
> > >
> > >/* REXX timing loop for daily task */
> > >iScheduled = TIME('S', '22:14:00') /* Convert scheduled time 22:14 to
seconds
> > >after midnight */
> > >do forever
> > > iNow = TIME('s') /* Seconds since midnight */
> > > iWait = iScheduled - iNow
> > > if iWait < 0 then iWait = iWait + TIME('S', '23:59:59') /* Not until
tomorrow */
> > >
> > > SAY 'Wait' iWait 'seconds, until' TIME('N', iScheduled, 'S')
> > > CALL SysSleep iWait
> > > 'START /B myjob.cmd'
> > >end
> > >
> > >
>
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: PenTeleData http://www.ptd.net (1:109/42)
+----------------------------------------------------------------------------+
From: jspringf@pro-ns.net 16-Oct-99 18:19:10
To: All 16-Oct-99 16:44:02
Subj: Re: Peer & HPFS 386
From: jspringf@pro-ns.net
In <3800AD74.E466E80C@worldnet.att.net>, "Joseph O. Henley"
<joehenley@worldnet.att.net> writes:
>Hi,
>
>Hopefully someone can help with a problem I have. I've just set up my
>first network: Peer to Peer, OS/2 to Win98. The OS/2 machine is ver
>4.0 - FP12, HPFS386 file system. Everything is OK so far, except every
>time I shutdown, I loose the shares on the OS/2 machine, so I cannot
>see files on the OS/2 machine from the Win98 machine.
>
>Every time I start up the OS/2 machine, I have to go into the
>"permissions" tab of "Shared Resources and Network Connections" and
>re-establish the shares. I suspect this is a result of using HPFS386,
>but I'm not sure. I also suspect there is a command line I can use to
>accomplish this task, but I have not been able to find it.
>
>Any and all help will be appreciated. Thanks!
>
>Joe Henley
There have been several warnings posted in the ng's against the use
of HPFS386 with PEER, whether you have a valid license for HPFS386,
or not.
My recommendation is to switch back to regular HPFS immediately.
-----------------------------------------------------------
Fred Springfield for e-mail remove 'xxx'
Plymouth, MN
-----------------------------------------------------------
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Professional Network Services (pro-ns.net) (1:109/42)
+----------------------------------------------------------------------------+
From: nospam@scholtus.nl 16-Oct-99 23:05:16
To: All 16-Oct-99 19:52:08
Subj: Re: OS/2 v2.1 TCP?
From: Koen Scholtus <nospam@scholtus.nl>
To my information, the TCPIP that comes with warp 4, only installs on warp
4. It won't accept warp 3 (and possibly everything below).
On OS/2 V2.1, i use to instal the separate TCPIP package that was sold as a
separate item.
Regards,
Koen Scholtus
"Walter S. Rue" wrote:
> Is there a way to install TCP/IP on OS/2 v2.1?
>
> I've used only v3 & v4, so don't know if v2.1 even has selective
> install. If it does, where would the stack come from? Would the v4 CD
> be usable, or v3 (Connect)?
>
> This isn't a Y2K issue. They need it within the next two weeks for
> about a dozen machines.
>
> Thanks in advance!
>
> Walter Rue
--
=======================================================
spam-proof address used. Send serious responses, remove
the 'nospam' from my address and use 'info' instead.
=======================================================
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: HACOM Internet - Amersfoort - The Netherlands. (0
(1:109/42)
+----------------------------------------------------------------------------+
From: kris@dgraph.com 16-Oct-99 16:21:27
To: All 16-Oct-99 21:21:03
Subj: Re: How to monitor Bytes Sent/Received
From: Kris Kadela <kris@dgraph.com>
Tim Stephen wrote:
>
> On Fri, 15 Oct 1999 13:48:10 -0600, Kris Kadela <kris@dgraph.com> wrote:
> >
> >I think these numbers get reset if you restart the PC so you would need
> >to keep a record of previous xfer stats.
> >
>
> Yes I know. My question is which one to use.
That would be whatever netstat -n gives you for totals
>
> Thanks.
>
> Tim
--
**********************
DigiGraph Technical
http://www.dgraph.com
**********************
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: DigiGraph Technical (1:109/42)
+----------------------------------------------------------------------------+
From: danchapman@home.com 17-Oct-99 04:02:00
To: All 17-Oct-99 03:47:12
Subj: Son's computer has cable modem connection...
From: Daniel <danchapman@home.com>
Hi,
My son's Win98 machine is connected to the internet through a cable
modem via an ethernet nic. I put a hub between the cable modem and his
system and he still gets access to the internet. Then I plugged my OS/2
Warp 4, fp12, TCP/IP 4.1 computer into the hub along with another Win 95
laptop I have. Now, my OS/2 machine and Win 95 laptop can ping each
other, but they can't ping my son's Win 98 machine or the cable modem.
And my son's Win 98 machine can't ping either of the other machines.
Does anyone know how I can get OS/2 access to that cable modem, either
directly or through my son's Win 98 machine. And by the way, how come no
one can see his machine (neither OS/2 or Win 95) even though we are all
running TCP/IP and on the same physical Ethernet ring?
Bob Chapman
bobchap@iads.net or it that doesn't work bobchap@ibm.net
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: @Home Network (1:109/42)
+----------------------------------------------------------------------------+
From: lsunley@mb.sympatico.ca 17-Oct-99 05:01:16
To: All 17-Oct-99 03:47:12
Subj: Re: Son's computer has cable modem connection...
From: lsunley@mb.sympatico.ca (Lorne Sunley)
On Sun, 17 Oct 1999 04:02:01, Daniel <danchapman@home.com> wrote:
> Hi,
>
> My son's Win98 machine is connected to the internet through a cable
> modem via an ethernet nic. I put a hub between the cable modem and his
> system and he still gets access to the internet. Then I plugged my OS/2
> Warp 4, fp12, TCP/IP 4.1 computer into the hub along with another Win 95
> laptop I have. Now, my OS/2 machine and Win 95 laptop can ping each
> other, but they can't ping my son's Win 98 machine or the cable modem.
> And my son's Win 98 machine can't ping either of the other machines.
>
> Does anyone know how I can get OS/2 access to that cable modem, either
> directly or through my son's Win 98 machine. And by the way, how come no
> one can see his machine (neither OS/2 or Win 95) even though we are all
> running TCP/IP and on the same physical Ethernet ring?
>
First, most cable modems identify a particular nic's MAC address
when they are first powered up. After identifying a nic MAC address
they will only respond to that nic (until they are powered off/on
again
at which they will identify the first nic MAC address they see and
thereafter only respond to that one.
The ability of the machines to access the others is determined by
the machines IP address, netmask value and the IP address(es) of
the DEFAULT and NET route assignments.
The machine that is "connected" to the cable modem has to
be able to act as a "router/gateway" for the other machines.
Because the Cable modem usually provides only a single
"real world" IP address you also require the capability for
NAT (Network Address Translation) so that the IP addresses
of the other machines appear as a "port" of the IP address
assigned to the machine acting as a gateway.
This capability is built into Win 98 SE but is not present in
the first version of Win 98.
OS/2 requires a third party product such as Injoy Gateway or
SafeFire firewall to act as a gateway NAT system.
What are the settings on the various machines?
Lorne Sunley
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: MBnet Networking Inc. (1:109/42)
+----------------------------------------------------------------------------+
From: Brian@webone.com.au 17-Oct-99 18:03:15
To: All 17-Oct-99 05:16:24
Subj: Re: How to monitor Bytes Sent/Received
From: Brian@webone.com.au
In <3808FA83.91D15223@dgraph.com>, Kris Kadela <kris@dgraph.com> writes:
>Tim Stephen wrote:
>>
>> On Fri, 15 Oct 1999 13:48:10 -0600, Kris Kadela <kris@dgraph.com> wrote:
>> >
>> >I think these numbers get reset if you restart the PC so you would need
>> >to keep a record of previous xfer stats.
>> >
>>
>> Yes I know. My question is which one to use.
>
>That would be whatever netstat -n gives you for totals
>
Hmmm, I have been working on this for a while.
1) If you use Injoy then it keeps the stats for you.
2) The problem with netstat -n is you have to issue it before
you lose the ppp connection, otherwise you get the LAN0 stats
but the PPP0 stat come up blank.
3) Issuing netstat -n works ok when you disconnect but if you get
disconnected then the stats are lost.
Happy to hear from anyone who knows a way around this.
Brian
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Web One Internet http://webone.com.au (1:109/42)
+----------------------------------------------------------------------------+
From: bill.greuling@home.com 17-Oct-99 16:21:06
To: All 17-Oct-99 16:35:05
Subj: Re: default password in TCP/IP 4.1 configuration utility?
From: Bill Greuling <bill.greuling@home.com>
This remote server problem has been driving me nuts too. Anyone know
where I went wrong?
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: @Home Network (1:109/42)
+----------------------------------------------------------------------------+
From: michael.warmuth@wu-wien.ac.at 17-Oct-99 17:35:18
To: All 17-Oct-99 16:35:05
Subj: Re: sendmail
From: Michael Warmuth <michael.warmuth@wu-wien.ac.at>
On 16.10.99, 9.21.45, derek.vance.steel@natureboy.dyn.tj wrote
regarding "sendmail":
> http://www.sendmail.org has all the OS version and much
> assistance/documentations in using sendmail.
> As well you can find the latest version of sendmail for OS/2.
Can you please tell me where on this site OS/2 is mentioned? I could
not find a single file for OS/2 there. So please enlighten me about
the availability of a working version of sendmail 8.8.8 (or above).
The one on hobbes (8.9.3) just produces an SYS3175 in TCPIP32.DLL. An
older 8.8.8 for OS/2 I have does not work with 'owner-xxx' aliases.
Greetings
Michael
--
Michael Warmuth Austria - The place in the
http://www.os2forum.or.at/ heart of Europe where no
http://www.osiconsult.co.at/ kangaroos are hopping around
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Customer of EUnet Austria (1:109/42)
+----------------------------------------------------------------------------+
From: pajupa@sicom.fi 16-Oct-99 13:28:18
To: All 17-Oct-99 19:56:06
Subj: TCP/IP - how to update?
From: pajupa@sicom.fi (Pasi Partanen)
There are so many choices for updating OS/2 that
it makes me confused.
If someone has already correct URL's for needed updates,
could you post them?
Summary:
Standard Warp4 with FP10 installed.
TCP/IP is standard one, shipped with Warp.
Using modem and Injoy.
What do I need?
--
-=- E-Mail pajupa@sicom.fi Homepage http://www.sicom.fi/~pajupa -=-
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Hackers' Lair BBS (1:109/42)
+----------------------------------------------------------------------------+
From: gczerw@home.No-Spam.com 17-Oct-99 20:22:20
To: All 17-Oct-99 19:56:07
Subj: Re: default password in TCP/IP 4.1 configuration utility?
From: gczerw@home.No-Spam.com (George Czerw)
On Sun, 17 Oct 1999 16:21:12, Bill Greuling <bill.greuling@home.com>
wrote:
> This remote server problem has been driving me nuts too. Anyone know
> where I went wrong?
>
I suspect that you incorrectly or unconsciously set up remote server
during the installation. IIRC, I did the same thing first time I
installed it, as well. Easiest thing to do is to uninstall, reboot,
and reinstall properly.
George
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: @Home Network (1:109/42)
+----------------------------------------------------------------------------+
From: blaz.lorger@guest.arnes.si 17-Oct-99 14:38:01
To: All 18-Oct-99 02:24:12
Subj: Re: Son's computer has cable modem connection...
From: blaz.lorger@guest.arnes.si
>My son's Win98 machine is connected to the internet through a cable modem
>via an ethernet nic. I put a hub between the cable modem and his system
>and he still gets access to the internet. Then I plugged my OS/2 Warp 4,
>fp12, TCP/IP 4.1 computer into the hub along with another Win 95 laptop I
>have. Now, my OS/2 machine and Win 95 laptop can ping each other, but
You should be aware that this configuration has open your LAN to internet.
Additionally, you clobber your cable modem connection with your LANs traffic.
It is much safer and "bandwidth efficient" if you install second NIC to
connect cable modem and let computer route traffic between LAN and internet.
Blaz
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: ARNES (1:109/42)
+----------------------------------------------------------------------------+
From: Tim Stephen@CIOS.ORG 17-Oct-99 13:02:00
To: All 18-Oct-99 02:24:12
Subj: Re: How to monitor Bytes Sent/Received
From: Tim Stephen@CIOS.ORG (Tim Stephen)
On Sat, 16 Oct 1999 16:21:55 -0600, Kris Kadela <kris@dgraph.com> wrote:
>
>That would be whatever netstat -n gives you for totals
>
That number is different from what you see in netstat -t in its
"data bytes sent" -- how are these two numbers different?
- Tim
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Monmouth Internet (1:109/42)
+----------------------------------------------------------------------------+
From: bvermo@powertech.no 17-Oct-99 20:06:25
To: All 18-Oct-99 03:19:22
Subj: Re: sendmail 8.9.1 & Aurora
From: =?iso-8859-1?Q?Bj=F8rn?= Vermo <bvermo@powertech.no>
Peter Moylan wrote:
>
> The author (that's me) spends a lot of time in the OS/2 newsgroups,
> and new versions of Weasel come out from time to time.
>
Then this might be as good a place for a small? request as any other.
I have tested Weasel in my intranet, and it looks like it might be useful. It
seems to lack one feature I need, though. If it can be implemented in a filter
or
add on, I could write it myself, but it does not look like that to me.
Apart from the local use, I would like to receive mail from several hosts run
by
different ISPs, or some other closed networks I might only have PPP access to.
I
would like to do this based on, for instance, an event semaphore. For example,
such that it connected to mail.somesite with user nn and password xx from some
configuration file whenever /sem32/lookatsomesite was set from one of my
programs
and not otherwise. Then, I would redirect any mail from that server to a local
user id defined in the same configuration, or through a filter which even
might
want to post it to a local newsgroup on my news server.
I would also like to control the times when Weasel tries to send out bound
mail to
certain outside exchange points. I understand that you have only tried to
implement a normal fixed connection to the Internet, but I do not think I am
the
only one who needs to interconnect private and public sites in this way. It
would
take a similiar configuration to what was used in the old UUCP days to tell
which
domains can be reached through which hosts, but preferrably controlled by a
semaphore or some other type of flag instead of by a time schedule.
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Norbionics (1:109/42)
+----------------------------------------------------------------------------+
From: piquant00@uswestmail.net 17-Oct-99 23:07:10
To: All 18-Oct-99 03:19:22
Subj: Re: TCP/IP - how to update?
From: piquant00@uswestmail.net (Annie K.)
On Sat, 16 Oct 1999 10:28:37, pajupa@sicom.fi (Pasi Partanen) wrote:
:There are so many choices for updating OS/2 that
:it makes me confused.
:
:If someone has already correct URL's for needed updates,
:could you post them?
http://duanec.indelible-blue.com/fixes/LatestWarp4.html
--
Klaatu barada nikto
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Team OS/2 (1:109/42)
+----------------------------------------------------------------------------+
From: bill.greuling@home.com 18-Oct-99 01:51:10
To: All 18-Oct-99 03:19:22
Subj: Re: default password in TCP/IP 4.1 configuration utility?
From: Bill Greuling <bill.greuling@home.com>
Well, I can certainly expect that I goofed the installation up somehow.
But I see nothing in the task list about the remote server program running;
I also uninstalled and reinstalled with the same result. What do you look
for to prevent installing the remote server?
TIA,
Bill
George Czerw wrote:
> On Sun, 17 Oct 1999 16:21:12, Bill Greuling <bill.greuling@home.com>
> wrote:
>
> > This remote server problem has been driving me nuts too. Anyone know
> > where I went wrong?
> >
>
> I suspect that you incorrectly or unconsciously set up remote server
> during the installation. IIRC, I did the same thing first time I
> installed it, as well. Easiest thing to do is to uninstall, reboot,
> and reinstall properly.
>
> George
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: @Home Network (1:109/42)
+----------------------------------------------------------------------------+
From: moschleg@erols.com 18-Oct-99 01:56:19
To: All 18-Oct-99 11:10:17
Subj: Re: TCP/IP - how to update?
From: Mark Schlegel <moschleg@erols.com>
"Annie K." wrote:
>
> On Sat, 16 Oct 1999 10:28:37, pajupa@sicom.fi (Pasi Partanen) wrote:
>
> :There are so many choices for updating OS/2 that
> :it makes me confused.
> :
> :If someone has already correct URL's for needed updates,
> :could you post them?
>
> http://duanec.indelible-blue.com/fixes/LatestWarp4.html
>
> --
> Klaatu barada nikto
Also see:
http://www.warpupdates.de/english/warpupdates.html
Mark
--- WtrGate+ v0.93.p7 sn 165
* Origin: Origin Line 1 Goes Here (1:109/42)
+----------------------------------------------------------------------------+
From: kenames@earthlink.net 18-Oct-99 15:28:10
To: All 18-Oct-99 14:36:03
Subj: Re: TCP/IP Version 4.1 Header files and libraries ?
From: kenames@earthlink.net
you need a level higher then member, advanced I think, to get the
tcpip 4.1 headers.
Ken
On Wed, 13 Oct 1999 13:32:11, Paul Randall <prandall@delta-info.com>
wrote:
> This is a multi-part message in MIME format.
> I just installed TCP/IP Version 4.1 on OS/2 Warp 4 and I can't find the
> corresponding header files or libraries. I am still using the TCP/IP
> Version 4.0 header files and libraries which came on the Warp 4 install
> CD. While this seems to work, I'd feel better using the correct files.
> I've explored the Developer Connection CDs (member level) and haven't
> found anything. I'd appreciate any pointers to these files. Thanks in
> advance,
>
> Paul
>
> --
> Paul Randall
> Delta Information Systems
> http://www.delta-info.com/products/vt320/vt320.htm
> mailto:prandall@delta-info.com
>
>
> Content-Description: Card for Paul Randall
> -------Begin Encoded File-------
> Encoded filename: prandall.vcf
> Decoded path: file:///C:\PRONEWS\DECODED\prandall.vcf
> Encoding type: 7-Bit
> File size: 0KB
> --------End Encoded File--------
>
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: EarthLink Network, Inc. (1:109/42)
+----------------------------------------------------------------------------+
From: gczerw@home.No-Spam.com 18-Oct-99 16:04:18
To: All 18-Oct-99 16:32:03
Subj: Re: default password in TCP/IP 4.1 configuration utility?
From: gczerw@home.No-Spam.com (George Czerw)
On Mon, 18 Oct 1999 01:51:20, Bill Greuling <bill.greuling@home.com>
wrote:
> Well, I can certainly expect that I goofed the installation up somehow.
> But I see nothing in the task list about the remote server program running;
> I also uninstalled and reinstalled with the same result. What do you look
> for to prevent installing the remote server?
>
> TIA,
> Bill
>
Bill, it's been so long since I installed it, I frankly don't remember
what's in the installation routine.
Look through the various *.CMD files in the MPTN and TCPIP folders
(start with c:\mptn\bin\mptstart.cmd and follow the command chain) and
see if something is automatically loading either tcpcfg2d.cmd (starts
tcpip configuration server) or tcpcfg2r.cmd (opens tcpip configuration
to configure tcpip on a remote workstation)!
George
> George Czerw wrote:
>
> > On Sun, 17 Oct 1999 16:21:12, Bill Greuling <bill.greuling@home.com>
> > wrote:
> >
> > > This remote server problem has been driving me nuts too. Anyone know
> > > where I went wrong?
> > >
> >
> > I suspect that you incorrectly or unconsciously set up remote server
> > during the installation. IIRC, I did the same thing first time I
> > installed it, as well. Easiest thing to do is to uninstall, reboot,
> > and reinstall properly.
> >
> > George
>
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: @Home Network (1:109/42)
+----------------------------------------------------------------------------+
From: scalisi@tin.it 16-Oct-99 15:33:05
To: All 18-Oct-99 22:36:23
Subj: Re: sendmail command line options
From: scalisi@tin.it
This is a MIME encapsulated message.
--===_38087EE2_==
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
In <380240c4.0@katana.legend.co.uk>, on 10/11/99
at 07:55 PM, jpolt@bradnet.legend.co.uk (John Poltorak) said:
>I know it possible to send an email from the command line using IBM's
>sendmail, but I've forgotten the syntax, and am a long way from my manuals.
>Can someone remind me, please?
I attach an EPM macro to sendmail from EPM window.
--
-----------------------------------------------------------
Antonio(Nino) Scalisi scalisi@tin.it
at 15:33(+0200, relative to GMT) on Saturday, 16 Oct 1999
Using MR/2 ICE v1.66 Reg: #20729.
Under ---> OS/2 WARP 4 rev.9.036 (fixpack 12)
Java ver. 1.1.8 build 19990910
ObjREXX 6.00 TCPIP 4.2 - MPTN 6.2007 (TCPIP 4.1 + W08620)
-----------------------------------------------------------
--===_38087EE2_==
Content-Type: text/plain; name="SENDMAIL.E"
/* Ultima modifica fatta --> Mercoled╔ 22 Settembre 1999, alle 20:09. */
/*
Here's an EPM macro that invokes Sendmail to send the current file to the
addressee(s) given as an argument (or prompted for, if no argument is
provided - e.g., when used in the EPM 6 toolbar).
Set the my_EMAIL_ADDRESS constant appropriately, here or in your MYCNF.E.
Larry Margolis
Change the SIGNATURE to reflect your data. a.s. 16 Jan 1999
*/
compile if not defined(SMALL) -- If SMALL not defined, then being separately
compiled.
define INCLUDING_FILE = 'SENDMAIL.E'
const
tryinclude 'MYCNF.E' -- Get the user's configuration customizations.
include "english.e"
defmain
'mail' arg(1)
compile endif
compile if not defined(my_EMAIL_ADDRESS)
const
my_EMAIL_ADDRESS = 'myuserid@local.com'
compile endif
defc Mail =
universal vTEMP_FILENAME
mail_to = arg(1)
subject = entrybox("Enter subject of e-mail")
if mail_to = '' then
mail_to = entrybox("Enter list of addressees")
if mail_to = '' then
return
endif
endif
parse value igetdate() with today';' .
top
insertline 'Subject: 'subject' (sent by EPM 60b) '
insertline ' '
bottom
insertline ' ', .last+1
insertline '--', .last+1
insertline '-----------------------------------------------------------',
.last+1
insertline ' Antonio(Nino) Scalisi 'my_EMAIL_ADDRESS, .last+1
insertline ' Using "mail" CMD of EPM 603b on 'today '', .last+1
insertline ' Using.... --> OS/2 WARP 4 rev.9.035 (fixpack 11) ',
.last+1
insertline ' Java ver. 1.1.8 build 19990910 ',
.last+1
insertline ' ObjREXX 6.00 TCPIP 4.2 - MPTN 6.1002 (TCPIP 4.1 + W08620)',
.last+1
insertline '-----------------------------------------------------------',
.last+1
if .modify then
'xcom save /q' vTEMP_FILENAME
if rc then
sayerror ERROR_SAVING_HALT__MSG
return
endif
'sendmail -af' vTEMP_FILENAME '-f' my_EMAIL_ADDRESS mail_to
sayerror 'Msg Sent by SENDMAIL to:-->'mail_to
messagenwait('Msg Sent by SENDMAIL to:-->'mail_to)
sayerror 'file= 'vTEMP_FILENAME
call erasetemp(vTEMP_FILENAME)
else
'sendmail -af' .filename '-f' my_EMAIL_ADDRESS mail_to
sayerror 'Msg sent by SENDMAIL to:-->'mail_to
messagenwait('Msg sent by SENDMAIL to:-->'mail_to)
endif
;
--===_38087EE2_==
Content-Type: text/plain; charset=US-ASCII
Content-Transfer-Encoding: 7bit
--===_38087EE2_==--
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: TIN (1:109/42)
+----------------------------------------------------------------------------+
From: bschwand@dvart.com 18-Oct-99 13:38:20
To: All 18-Oct-99 22:36:24
Subj: Re: How to monitor Bytes Sent/Received
From: bruno schwander <bschwand@dvart.com>
most probably, the "total bytes" refers to everything including
handshake/routing/etc information, wether "data bytes" would be the data
payload (in an IP packet)
?
this is only hypothesis on my part...
In any case, you would have to ask your ISP how they count their traffic...
bruno
Tim Stephen wrote:
> An ISP we're considering using imposes a 12 GIG/month limit on total
> traffic on one's link, excess to cost addition per month over the base
> rate.
>
> I can see two ways of calculating link traffic on OS/2. Both involve
> netstat.
>
> NETSTAT -n lists a "total bytes sent" figure and a "total bytes
> received" figure. However NETSTAT -t lists a "data bytes sent" figure
> and a "data bytes received" figure.
>
> What is the difference between these numbers and which numbers will
> correspond with what the ISP's are tracking?
>
> Thanks!
>
> Tim Stephen
> CIOS
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)
+----------------------------------------------------------------------------+
From: bschwand@dvart.com 18-Oct-99 13:31:09
To: All 18-Oct-99 22:36:24
Subj: Re: LPRMON + LPD
From: bruno schwander <bschwand@dvart.com>
what ????
I thought LPRPORTD.EXE is there specifically to do that, redirect an lpt port
to a
print queue !
I may be wrong, since I can't read the doc right now, but it is worth
checking...
bruno
James Moe wrote:
> George Barrowcliff wrote:
> >
> > I have two printers connected via ethernet to one OS2 Warp machine. What
> > components of TCP/IP do I have to configure to redirect printing
> > from LPT1 and LPT2 to these two printers?
> >
> > Both printers respond to ping commands from address translation in HOSTS
and
> > also their IP addresses.
> >
>
> Unless the printers have a built-in LPD server, you can't. This IMO
> has always been a grave weakness in the tcpip suite: no way to server
> printers that do not have LPD. unix has been doing it for decades;
> what's the friggin' problem?
> If the printers have JetDirect network cards, you can set one of the
> os/2 machines up to server the printers using HP's JetDirect or WebJet
> printer servers for os/2. They can then be made available using Peer
> services.
>
> --
>
> sma at rtd dot com
> Remove ".spam-not" for email
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)
+----------------------------------------------------------------------------+
From: colin@boink.demon.co.uk 18-Oct-99 23:48:14
To: All 19-Oct-99 03:31:02
Subj: Re: OS/2 v2.1 TCP?
From: "Colin Vernon" <colin@boink.demon.co.uk>
>I've used only v3 & v4, so don't know if v2.1 even has selective
>install.
>If it does, where would the stack come from?
It came with it's own version of LAPS, which included TCP/IP support. LAPS
was the forerunner to MPTS.
LAPS stood for LAN Adapter and Protocol Support, as opposed to Multiple
Protocol Transport Services.
>Would the v4 CD be usable, or v3 (Connect)?
OS2V40 ... I doubt it since it uses a converged MPTS stack. V3 ... possibly
but it would not be supported by IBM, mind you, neither would TCP/IP 2.1.
I would recommend you use OS2V40 TCP/IP + Y2K fixes ... and installing
anything that isn't Y2K ready at this stage in the year in complete madness.
Regards, Colin
--- WtrGate+ v0.93.p7 sn 165
* Origin: Origin Line 1 Goes Here (1:109/42)
+----------------------------------------------------------------------------+
From: w.h.m.wauters.1998@cranfield.ac.uk 19-Oct-99 11:15:21
To: All 19-Oct-99 10:32:22
Subj: Re: How to get Win98 WS to log onto a WsEB server
From: Wim Wauters <w.h.m.wauters.1998@cranfield.ac.uk>
Alex Smariga wrote:
> I have a workstation that normally is running Warp but is dual bootable
> to Win98. Warp connects easily to the WsEB server, ethernet, TCP/IP and
> Netbeui.
> Occasionally, I need to boot the ws to Win98, and would like to have it
> also access the server.
>
> I am not sure what I need to do to Win98 to get it to see WsEB. I have
> created tcpip and netbeui, and given it static ip addresses. But it
> doesn't even ask for the domain address when I start.
>
> Where can I look for a simple procedure to get these machines connected?
I assume you looked at IBM's software choice ?
At the bottom of the page, you will find free-bies (till Jan 2000 only !).
There seem to be a range of Windows-clients to access Warp server services,
I hope they include Win98 utilities.
WiWat
(it's a small world, isn't it ? (hint: check the OS/2 Warp group at SETI)).
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Sirius Cybernetics Corporation (1:109/42)
+----------------------------------------------------------------------------+
From: uliw@erdw.ethz.ch 19-Oct-99 12:17:00
To: All 19-Oct-99 10:32:23
Subj: IMAP support for emacs???
From: Uli Wortmann <uliw@erdw.ethz.ch>
Hi there,
has anybody ever heard of IMAP support of the os/2 emacs port?
Thanks
Uli
--
Uli Wortmann Fax (Switzerland) (1) 632 1080
Dept. of Geology Fon 3694
ETH-Zuerich http://www.erdw.ethz.ch/~bonk/bonk.html
Visit the SPOC-team at http://www.spoc.ethz.ch
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Dept. of Geology, ETH-Zuerich (1:109/42)
+----------------------------------------------------------------------------+
From: domi@kenavo.NOSPAM.fi 19-Oct-99 10:03:20
To: All 19-Oct-99 10:32:23
Subj: Re: default password in TCP/IP 4.1 configuration utility?
From: domi@kenavo.NOSPAM.fi (Dominique Pivard)
On Tue, 19 Oct 1999 00:13:06, tvoltagg@home.com wrote:
> I didn't see the original post, but do know that when you install 4.1 it
> screws up the local and remote tcp/ip configuration. All you do is right
> click on the tcp/ip configuration icon and rename tcpcfg2d to tcpcfg2r
> and do the same to the allow remote configuration icon (but change
> rom ..2r to ..2d)
Could you be more specific? On my system, the java command in
tcpcfg2.cmd, tcpcfg2d.cmd and tcpcfg2r.cmd look (respectively) as
follows:
java COM.ibm.raleigh.tcp.tcpcfg2.client.Tcpcfg2c %tcplang% local
notrace
java COM.ibm.raleigh.tcp.tcpcfg2.server.Tcpcfg2d %tcplang% notrace %1
java COM.ibm.raleigh.tcp.tcpcfg2.client.Tcpcfg2c %tcplang% remote
So what is the right command for starting the local configuration
(without gettimg an error message telling us the server is already
started)?
Thanks, Dominique
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: None!! (1:109/42)
+----------------------------------------------------------------------------+
From: tvoltagg@home.com 19-Oct-99 11:20:17
To: All 19-Oct-99 10:32:23
Subj: Re: default password in TCP/IP 4.1 configuration utility?
From: tvoltagg@home.com
I'm sorry, but I did this a while ago and don't remember the specific details.
What I do remember is that the "allow remote configuration" icons actually
pointed
to the local computer and vice versa. All I did was change the executable
name
in the properties, program page in each icon so that the local configuration
icon had the executable as tcpcfgr.cmd and the remote icon had the executable
as tcpcfgd.cmd
In <3Bd8PsIG3uxi-pn2-gvSw6LGxJm2S@tp560>, domi@kenavo.NOSPAM.fi (Dominique
Pivard) writes:
>On Tue, 19 Oct 1999 00:13:06, tvoltagg@home.com wrote:
>
>> I didn't see the original post, but do know that when you install 4.1 it
>> screws up the local and remote tcp/ip configuration. All you do is right
>> click on the tcp/ip configuration icon and rename tcpcfg2d to tcpcfg2r
>> and do the same to the allow remote configuration icon (but change
>> rom ..2r to ..2d)
>
>Could you be more specific? On my system, the java command in
>tcpcfg2.cmd, tcpcfg2d.cmd and tcpcfg2r.cmd look (respectively) as
>follows:
>
>java COM.ibm.raleigh.tcp.tcpcfg2.client.Tcpcfg2c %tcplang% local
>notrace
>java COM.ibm.raleigh.tcp.tcpcfg2.server.Tcpcfg2d %tcplang% notrace %1
>java COM.ibm.raleigh.tcp.tcpcfg2.client.Tcpcfg2c %tcplang% remote
>
>So what is the right command for starting the local configuration
>(without gettimg an error message telling us the server is already
>started)?
>
>Thanks, Dominique
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Team OS/2 (1:109/42)
+----------------------------------------------------------------------------+
From: rothgv@yahoo.com 19-Oct-99 15:52:12
To: All 19-Oct-99 12:51:29
Subj: LNE100TX, IBM processor and SIS chipset
From: rothgv@yahoo.com
I have a PC with an IBM p266 processor and an MTech r581 MB. An ISA 3com
network adaptor is working fine in this configuration. I am trying to
add a PCI LNKSYS LNE100TX network adaptor to build a home network using
my OS2 machine as a proxy. I've installed the hardware and drivers,
Seems to be recognized at startup and I am able to ping the address i've
assigned the new card from the os2 machine, but cannot talk to any
address beyond my hub.
I saw some notes at the LNKSYS site about an incompatibility with
CYRIX(IBM) processors and some comment about SIS chipsets and was
wondering if anyone had gotten the combination I described above to
work. I've sent a note to LNKSYS about this but felt that any real
experience would help.
Thanks in advance.
Sent via Deja.com http://www.deja.com/
Before you buy.
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Deja.com - Before you buy. (1:109/42)
+----------------------------------------------------------------------------+
From: smariga@gte.net 19-Oct-99 21:16:24
To: All 19-Oct-99 16:46:05
Subj: Re: How to get Win98 WS to log onto a WsEB server
From: Alex Smariga <smariga@gte.net>
On Tue, 19 Oct 1999 11:15:43 +0100, Wim Wauters wrote:
>I assume you looked at IBM's software choice ?
>At the bottom of the page, you will find free-bies (till Jan 2000 only !).
>There seem to be a range of Windows-clients to access Warp server services,
>I hope they include Win98 utilities.
>
First thing I did was look at the Software Choice.
There is only a Win95 driver. Tried that but Win98 won't recognize it
at all.
So I'm still looking.
Alex
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: EarthLink Network, Inc. (1:109/42)
+----------------------------------------------------------------------------+
From: as@sci.fi 19-Oct-99 18:28:05
To: All 19-Oct-99 16:46:05
Subj: Re: IMAP support for emacs???
From: Anssi Saari <as@sci.fi>
Uli Wortmann <uliw@erdw.ethz.ch> writes:
> Hi there,
>
> has anybody ever heard of IMAP support of the os/2 emacs port?
The question is a little odd, but I've used the IMAP support in vm
6.68, which is download only, nothing more. The nnimap backend for
Gnus I haven't tried, but I can't see why it wouldn't work.
--
Anssi Saari - as@sci.fi
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Tampere University of Technology (1:109/42)
+----------------------------------------------------------------------------+
From: bmork@dod.no 19-Oct-99 19:43:12
To: All 19-Oct-99 16:46:05
Subj: Re: IMAP support for emacs???
From: "Bj¢rn Mork" <bmork@dod.no>
Anssi Saari <as@sci.fi> writes:
> Uli Wortmann <uliw@erdw.ethz.ch> writes:
>
> > Hi there,
> >
> > has anybody ever heard of IMAP support of the os/2 emacs port?
>
> The question is a little odd, but I've used the IMAP support in vm
> 6.68, which is download only, nothing more. The nnimap backend for
> Gnus I haven't tried, but I can't see why it wouldn't work.
Works fine. You can find it here: <URL:http://www.extundo.com/nnimap/>
Bj¢rn
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Dynamics of Danger (1:109/42)
+----------------------------------------------------------------------------+
From: sbowring+nospam@mpc-data.co.uk 19-Oct-99 20:01:17
To: All 19-Oct-99 16:46:05
Subj: Re: Peer & HPFS 386
From: "Simon Bowring" <sbowring+nospam@mpc-data.co.uk>
On Sat, 16 Oct 1999 18:19:21 GMT, jspringf@pro-ns.net wrote:
>There have been several warnings posted in the ng's against the use
>of HPFS386 with PEER, whether you have a valid license for HPFS386,
>or not.
>
>My recommendation is to switch back to regular HPFS immediately.
Indeed - I've had two serious (i.e. serious data loss) crashes when using
OS/2 over many years (since 16 bit OS/2 v1.1). The first was on a
machine that I was developing device drivers on (fair enough, a
risk of "kernel mode" development) the second was the day after
installing HPFS386 on Warp 4+FP6 - the machine had crashed (possibly
not related to HPFS386), but I lost the boot partition completely
and couldn't recover it.
Simon Bowring
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: MPC Data Limited (1:109/42)
+----------------------------------------------------------------------------+
From: djm16@le.ac.uk 19-Oct-99 21:38:17
To: All 19-Oct-99 19:57:22
Subj: Re: OS/2 v2.1 TCP?
From: djm16@le.ac.uk (Dr D.J. Maconochie)
Manually, or using ICAT and LAPS utilities that came bindled with TCPIP, but
it
is many years since I did this.
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: University of Leicester, UK (1:109/42)
+----------------------------------------------------------------------------+
From: merlins@ibm.net 19-Oct-99 22:25:18
To: All 19-Oct-99 19:57:22
Subj: Re: default password in TCP/IP 4.1 configuration utility?
From: Meinolf Sondermann <merlins@ibm.net>
Hello y'all,
I don't use TCP/IP 4.1 right now, but I can't read this stupid guessing
anymore.
tvoltagg@home.com wrote:
>
> I'm sorry, but I did this a while ago and don't remember the specific
details.
> What I do remember is that the "allow remote configuration" icons actually
pointed
> to the local computer and vice versa. All I did was change the executable
name
> in the properties, program page in each icon so that the local configuration
> icon had the executable as tcpcfgr.cmd and the remote icon had the
executable
> as tcpcfgd.cmd
What you did is this:
You just tricked your eyes to load the remote config and name "local" and vice
versa.
You should look for some daemon running, to allow for incoming config requests
from a
remote machine.
>
> In <3Bd8PsIG3uxi-pn2-gvSw6LGxJm2S@tp560>, domi@kenavo.NOSPAM.fi (Dominique
Pivard) writes:
> >On Tue, 19 Oct 1999 00:13:06, tvoltagg@home.com wrote:
> >
> >> I didn't see the original post, but do know that when you install 4.1 it
> >> screws up the local and remote tcp/ip configuration. All you do is right
> >> click on the tcp/ip configuration icon and rename tcpcfg2d to tcpcfg2r
> >> and do the same to the allow remote configuration icon (but change
> >> rom ..2r to ..2d)
> >
> >Could you be more specific? On my system, the java command in
> >tcpcfg2.cmd, tcpcfg2d.cmd and tcpcfg2r.cmd look (respectively) as
> >follows:
> >
> >java COM.ibm.raleigh.tcp.tcpcfg2.client.Tcpcfg2c %tcplang% local notrace
> >java COM.ibm.raleigh.tcp.tcpcfg2.server.Tcpcfg2d %tcplang% notrace %1
This probably starts the daemon.
To use local utility, just kill any JAVA program and you're fine to run.
> >java COM.ibm.raleigh.tcp.tcpcfg2.client.Tcpcfg2c %tcplang% remote
> >
> >So what is the right command for starting the local configuration
> >(without gettimg an error message telling us the server is already
> >started)?
> >
> >Thanks, Dominique
Bye/2
Meinolf
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)
+----------------------------------------------------------------------------+
From: peter@seagoon.newcastle.edu.au 19-Oct-99 01:01:26
To: All 19-Oct-99 23:35:29
Subj: Re: sendmail 8.9.1 & Aurora
From: peter@seagoon.newcastle.edu.au (Peter Moylan)
Michael K Greene <mgreene@exis.net> wrote:
>Can I use Weasel to have a 486 sever collect all my various pop3 mails (I
>have my personal email and use 2 free accounts for maillists), sort to
>folders, and then have them all served to me (main computer) via IMAP? Just
>playing around.
The first half is easy. The Weasel distribution includes a POPGET.CMD
that can fetch mail from somewhere else and sort it to local folders.
(It's a relatively simple Rexx script, so it isn't hard to modify to
do variations on this theme.)
IMAP is a different story. The IMAP protocol is so different from the
POP3 protocol that it would be a major new project to handle it. From
time to time I've considered writing an IMAP server, but it's such a
big job that it certainly won't be done this year.
--
Peter Moylan peter@ee.newcastle.edu.au
See http://eepjm.newcastle.edu.au for OS/2 information and software
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: The University of Newcastle (1:109/42)
+----------------------------------------------------------------------------+
From: peter@seagoon.newcastle.edu.au 19-Oct-99 01:42:02
To: All 19-Oct-99 23:35:29
Subj: Re: sendmail 8.9.1 & Aurora
From: peter@seagoon.newcastle.edu.au (Peter Moylan)
Bj¢rn Vermo <bvermo@powertech.no> wrote:
>Peter Moylan wrote:
>
>>
>> The author (that's me) spends a lot of time in the OS/2 newsgroups,
>> and new versions of Weasel come out from time to time.
>>
>
>Then this might be as good a place for a small? request as any other.
>I have tested Weasel in my intranet, and it looks like it might be useful.
It
>seems to lack one feature I need, though. If it can be implemented in a
filter or
>add on, I could write it myself, but it does not look like that to me.
>
>Apart from the local use, I would like to receive mail from several hosts run
by
>different ISPs, or some other closed networks I might only have PPP access
to. I
>would like to do this based on, for instance, an event semaphore. For
example,
>such that it connected to mail.somesite with user nn and password xx from
some
>configuration file whenever /sem32/lookatsomesite was set from one of my
programs
>and not otherwise. Then, I would redirect any mail from that server to a
local
>user id defined in the same configuration, or through a filter which even
might
>want to post it to a local newsgroup on my news server.
If I've correctly understood what you're saying, this can be done by a
separate command file that's executed when you connect to the host,
and then does a POP fetch and stores the mail locally (or processes it
in whatever way you need). In another posting in this thread I mentioned
a POPGET.CMD that's included with Weasel. Take a look at it, it might
be what you need. It sounds as if you're an experienced enough
programmer to customize this to your own needs.
>I would also like to control the times when Weasel tries to send out bound
mail to
>certain outside exchange points.
Other people have asked for this, so the latest version looks for a file
called "Online" before sending outbound mail - you can create and
destroy this file as needed. (It could be done with semaphores, but
not everyone understands semaphores. Doing it based on the presence
of a file means that people can easily move the file as part of their
dialler script.)
--
Peter Moylan peter@ee.newcastle.edu.au
See http://eepjm.newcastle.edu.au for OS/2 information and software
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: The University of Newcastle (1:109/42)
+----------------------------------------------------------------------------+
From: tvoltagg@home.com 19-Oct-99 00:13:03
To: All 19-Oct-99 23:35:29
Subj: Re: default password in TCP/IP 4.1 configuration utility?
From: tvoltagg@home.com
I didn't see the original post, but do know that when you install 4.1 it
screws up the local and remote tcp/ip configuration. All you do is right
click on the tcp/ip configuration icon and rename tcpcfg2d to tcpcfg2r
and do the same to the allow remote configuration icon (but change
rom ..2r to ..2d)
In <pSKGC2YPsbY6-pn2-G5OGBrLpuK1M@cc185270-a.burl1.nj.home.com>,
gczerw@home.No-Spam.com (George Czerw) writes:
>On Mon, 18 Oct 1999 01:51:20, Bill Greuling <bill.greuling@home.com>
>wrote:
>
>> Well, I can certainly expect that I goofed the installation up somehow.
>> But I see nothing in the task list about the remote server program running;
>> I also uninstalled and reinstalled with the same result. What do you look
>> for to prevent installing the remote server?
>>
>> TIA,
>> Bill
>>
>
>Bill, it's been so long since I installed it, I frankly don't remember
>what's in the installation routine.
>
>Look through the various *.CMD files in the MPTN and TCPIP folders
>(start with c:\mptn\bin\mptstart.cmd and follow the command chain) and
>see if something is automatically loading either tcpcfg2d.cmd (starts
>tcpip configuration server) or tcpcfg2r.cmd (opens tcpip configuration
>to configure tcpip on a remote workstation)!
>
>George
>
>
>> George Czerw wrote:
>>
>> > On Sun, 17 Oct 1999 16:21:12, Bill Greuling <bill.greuling@home.com>
>> > wrote:
>> >
>> > > This remote server problem has been driving me nuts too. Anyone know
>> > > where I went wrong?
>> > >
>> >
>> > I suspect that you incorrectly or unconsciously set up remote server
>> > during the installation. IIRC, I did the same thing first time I
>> > installed it, as well. Easiest thing to do is to uninstall, reboot,
>> > and reinstall properly.
>> >
>> > George
>>
>
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Team OS/2 (1:109/42)
+----------------------------------------------------------------------------+
From: smariga@gte.net 19-Oct-99 06:24:06
To: All 19-Oct-99 23:36:00
Subj: How to get Win98 WS to log onto a WsEB server
From: Alex Smariga <smariga@gte.net>
I have a workstation that normally is running Warp but is dual bootable
to Win98. Warp connects easily to the WsEB server, ethernet, TCP/IP and
Netbeui.
Occasionally, I need to boot the ws to Win98, and would like to have it
also access the server.
I am not sure what I need to do to Win98 to get it to see WsEB. I have
created tcpip and netbeui, and given it static ip addresses. But it
doesn't even ask for the domain address when I start.
Where can I look for a simple procedure to get these machines connected?
Alex
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: EarthLink Network, Inc. (1:109/42)
+----------------------------------------------------------------------------+
From: merlins@ibm.net 19-Oct-99 02:02:25
To: All 19-Oct-99 23:36:00
Subj: Re: LPRMON + LPD
From: Meinolf Sondermann <merlins@ibm.net>
bruno schwander wrote:
>
> what ????
> I thought LPRPORTD.EXE is there specifically to do that, redirect an lpt
port to a
> print queue !
> I may be wrong, since I can't read the doc right now, but it is worth
checking...
This is from online docu :
+++++++++++ schnipp ++++++++++++++++++++
lprmon Starts LPRMON, a parallel device monitor that sets
up your workstation to automatically send data to
a remote LPR server.
lprportd Starts the LPD port support.
+++++++++++ schnapp ++++++++++++++++++++
>
> bruno
>
> James Moe wrote:
>
> > George Barrowcliff wrote:
> > >
> > > I have two printers connected via ethernet to one OS2 Warp machine.
What
> > > components of TCP/IP do I have to configure to redirect printing
> > > from LPT1 and LPT2 to these two printers?
> > >
> > > Both printers respond to ping commands from address translation in HOSTS
and
> > > also their IP addresses.
> > >
> >
> > Unless the printers have a built-in LPD server, you can't. This IMO
I don't know any printer with TCP/IP support (responds to ping) that has no
LPR server.
> > has always been a grave weakness in the tcpip suite: no way to server
> > printers that do not have LPD. unix has been doing it for decades;
How ?
> > what's the friggin' problem?
> > If the printers have JetDirect network cards, you can set one of the
> > os/2 machines up to server the printers using HP's JetDirect or WebJet
> > printer servers for os/2. They can then be made available using Peer
> > services.
HP printers ( and others with NW cards )my be directly printed to via TCP/IP.
No need to physically attach them to a PC's parallel port. Anyhow, it's a good
advice to use a PC as print server if the printer is shared to a couple
of PC's - but just for the use of a central spooler.
If the printer itself has a harddisk built, it can do the spooling as well.
Then
there is no need for a dedicated PC print server.
Another point: Newer JetDirect Cards ( and other similar devices ) have a
telnet daemon and a web server built in. You don't need any specific JetDirect
software to configure those devices.
> >
> > --
> >
> > sma at rtd dot com
> > Remove ".spam-not" for email
Bye/2
Meinolf
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)
+----------------------------------------------------------------------------+
From: domi@kenavo.NOSPAM.fi 20-Oct-99 05:28:12
To: All 20-Oct-99 03:24:08
Subj: Re: default password in TCP/IP 4.1 configuration utility?
From: domi@kenavo.NOSPAM.fi (Dominique Pivard)
On Tue, 19 Oct 1999 20:25:37, Meinolf Sondermann <merlins@ibm.net>
wrote:
> > >java COM.ibm.raleigh.tcp.tcpcfg2.client.Tcpcfg2c %tcplang% local notrace
> > >java COM.ibm.raleigh.tcp.tcpcfg2.server.Tcpcfg2d %tcplang% notrace %1
>
> This probably starts the daemon.
>
> To use local utility, just kill any JAVA program and you're fine to run.
My original point was, there's no java in the process list, yet I get
an error message telling me the remote config is already started. I do
think there's something broken in the TCP/IP 4.1 configuration
utilities.
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: None!! (1:109/42)
+----------------------------------------------------------------------------+
From: derek.vance.steel@natureboy.dyn.tj 20-Oct-99 06:45:23
To: All 20-Oct-99 10:29:02
Subj: Want OS/2 box to see Win98 Long file names
From: derek.vance.steel@natureboy.dyn.tj
Hello All.
How can I get my OS/2 machine to see Win98 long filenames.
At the moment only 8.3 filenames showup when using the os/2 box to
view files on a Win98 machine.
Derek
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Starfire Couriers (1:109/42)
+----------------------------------------------------------------------------+
From: uliw@erdw.ethz.ch 20-Oct-99 12:37:29
To: All 20-Oct-99 10:29:02
Subj: Re: IMAP support for emacs???
From: Uli Wortmann <uliw@erdw.ethz.ch>
"Bj°rn Mork" <bmork@dod.no> writes:
Hi there
> Works fine. You can find it here: <URL:http://www.extundo.com/nnimap/>
from docs, I conclude that I have to use the lates gnus, and in turn
have to upgrade to emacs 20.x???
Thanks for the pointer, I'll check this out.
Uli
--
Uli Wortmann Fax (Switzerland) (1) 632 1080
Dept. of Geology Fon 3694
ETH-Zuerich http://www.erdw.ethz.ch/~bonk/bonk.html
Visit the SPOC-team at http://www.spoc.ethz.ch
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Dept. of Geology, ETH-Zuerich (1:109/42)
+----------------------------------------------------------------------------+
From: alexandjulia@mpx.com.au 20-Oct-99 21:37:22
To: All 20-Oct-99 10:29:02
Subj: question
From: "Alessandro Porcaro" <alexandjulia@mpx.com.au>
Who can help me with this?
______________________________________________
Joe is trying to use this program to send some data on his Macintosh
computer to his friend's PC, but when his friend inspects the data, it is
all garbled and in some cases, some of characters are in reverse order.
Describe one possible reason why this might be happening and suggest what
might be possible fix?
______________________________________________
Thanks
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Optus Internet (1:109/42)
+----------------------------------------------------------------------------+
From: Stevie@Stevienet.co.uk 20-Oct-99 12:46:24
To: All 20-Oct-99 10:29:02
Subj: Stupid network question
From: "Stevie" <Stevie@Stevienet.co.uk>
For years I have had a copy of OS/2 Warp v3 with Bonux Pack sat on my shelf
doing nothing, now I have decided to try it out (mainly out of curiosity)
however I have ht upon a wonderful problem, just how do I connect it to my
LAN ?
The machine is a P150 Compaq Prosignia 500. I have downloaded all the
softpacs from Compaq but I cannot get the machine to install the net card
drivers. It keeps complaining about not having a 'profile control file'. Any
help will be appreciated I know the machine is sound as it previously ran
SCO Open Server with no problems.
Stevie
--- WtrGate+ v0.93.p7 sn 165
* Origin: Origin Line 1 Goes Here (1:109/42)
+----------------------------------------------------------------------------+
From: moerli@my-deja.com 20-Oct-99 12:35:02
To: All 20-Oct-99 19:50:27
Subj: OS/2 Warp Bootsdisk with TCPIP
From: moerli@my-deja.com
What is the easiest Way to create a Warp Bootdisk which will connect a
Thinkpad (PCMCIA) to a NT-Server?
Sent via Deja.com http://www.deja.com/
Before you buy.
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Deja.com - Before you buy. (1:109/42)
+----------------------------------------------------------------------------+
From: lsunley@mb.sympatico.ca 20-Oct-99 13:59:08
To: All 20-Oct-99 19:50:27
Subj: Re: Want OS/2 box to see Win98 Long file names
From: lsunley@mb.sympatico.ca (Lorne Sunley)
On Wed, 20 Oct 1999 06:45:47, derek.vance.steel@natureboy.dyn.tj
wrote:
> Hello All.
>
> How can I get my OS/2 machine to see Win98 long filenames.
>
> At the moment only 8.3 filenames showup when using the os/2 box to
> view files on a Win98 machine.
>
I don't believe this is possible. The implementation of the
SMB network (NETBIOS) in Windows 95/98 will not negotiate
a session with the implementation in OS/2 that will allow the
transfer of long file name information.
Lorne Sunley
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: MBnet Networking Inc. (1:109/42)
+----------------------------------------------------------------------------+
From: engel003@mc.duke.edu 20-Oct-99 10:14:24
To: All 20-Oct-99 19:50:27
Subj: Re: How to get Win98 WS to log onto a WsEB server
From: Blowhards <engel003@mc.duke.edu>
I have no trouble logging in to Warp Server 4 from Win98 machines that are
running the Win95 client. Logging in to WSeB shouldn't be any different.
What
are the symptoms?
Alex Smariga wrote:
> On Tue, 19 Oct 1999 11:15:43 +0100, Wim Wauters wrote:
>
> >I assume you looked at IBM's software choice ?
> >At the bottom of the page, you will find free-bies (till Jan 2000 only !).
> >There seem to be a range of Windows-clients to access Warp server services,
> >I hope they include Win98 utilities.
> >
>
> First thing I did was look at the Software Choice.
>
> There is only a Win95 driver. Tried that but Win98 won't recognize it
> at all.
>
> So I'm still looking.
>
> Alex
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Duke University (1:109/42)
+----------------------------------------------------------------------------+
From: spam_free_norrisg@linkline.com 20-Oct-99 08:17:23
To: All 20-Oct-99 19:50:27
Subj: Re: Stupid network question
From: "Graham C. Norris" <spam_free_norrisg@linkline.com>
If it is just Warp 3, not Warp Connect, the short answer is "you don't".
It didn't come with networking support, that's in Warp Connect (and Warp
4 of course). Unless you also happen to have a copy of Warp Server,
which includes client software, you are out of luck.
Graham.
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)
+----------------------------------------------------------------------------+
From: Stevie@Stevienet.co.uk 20-Oct-99 17:08:17
To: All 20-Oct-99 19:50:27
Subj: Re: Stupid network question
From: "Stevie" <Stevie@Stevienet.co.uk>
OK, thanks Graham, I'll have to look for Warp 4.
Stevie
Graham C. Norris <spam_free_norrisg@linkline.com> wrote in message
news:380DDD1B.A1D163FE@linkline.com...
> If it is just Warp 3, not Warp Connect, the short answer is "you don't".
> It didn't come with networking support, that's in Warp Connect (and Warp
> 4 of course). Unless you also happen to have a copy of Warp Server,
> which includes client software, you are out of luck.
>
> Graham.
--- WtrGate+ v0.93.p7 sn 165
* Origin: Origin Line 1 Goes Here (1:109/42)
+----------------------------------------------------------------------------+
From: dkvello@hotmail.com 20-Oct-99 16:54:21
To: All 20-Oct-99 19:50:27
Subj: Re: How to get Win98 WS to log onto a WsEB server
From: Dag Kvello <dkvello@hotmail.com>
The client sw you need comes with the WSeB package. IBM Logon Client for
W95/W98.
OR you can go to:
http://service5.boulder.ibm.com/pspfixpk.nsf/3f5d9c073e8a66718625662800691e9b/a
7206f20f0d343dd852567a70049f9cc?OpenDocument
or directly to:
ftp://ftp.software.ibm.com/ps/products/lan/fixes/dlr_win95_nt/english-us/ip0831
4/W95_001.ZIP
Alex Smariga wrote:
> I have a workstation that normally is running Warp but is dual bootable
> to Win98. Warp connects easily to the WsEB server, ethernet, TCP/IP and
> Netbeui.
> Occasionally, I need to boot the ws to Win98, and would like to have it
> also access the server.
>
> I am not sure what I need to do to Win98 to get it to see WsEB. I have
> created tcpip and netbeui, and given it static ip addresses. But it
> doesn't even ask for the domain address when I start.
>
> Where can I look for a simple procedure to get these machines connected?
>
> Alex
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Telia Internet Public Access (1:109/42)
+----------------------------------------------------------------------------+
From: dkvello@hotmail.com 20-Oct-99 17:13:02
To: All 20-Oct-99 19:50:27
Subj: Re: sendmail
From: Dag Kvello <dkvello@hotmail.com>
If you need a free POP/SMTP Server that is easy to configure, go here:
http://www.raleigh.ibm.com/misc/os2pops
Shelton wrote:
> Where can I find some info on how to set up sendmail as a server in
> warp4 with no domain ?
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Telia Internet Public Access (1:109/42)
+----------------------------------------------------------------------------+
From: mr_ace@gmx.de 20-Oct-99 20:43:13
To: All 20-Oct-99 19:50:28
Subj: SOCKS5
From: mr_ace@gmx.de
Hi folks!
I'm going to try to access the internet through a SOCKS5 server.
Is there any way to do that with OS/2 Warp 4 and TCP/IP 4.1??
I tried to connect to the ICQ-Server with ICQ for Java, but I
didn't get any contact... :-(
Does someone know what I have to do??
Thanxx for your answers!
Cu!
Andi
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: University of Karlsruhe (1:109/42)
+----------------------------------------------------------------------------+
From: thier@attglobal.net 20-Oct-99 19:56:16
To: All 20-Oct-99 19:50:28
Subj: Re: default password in TCP/IP 4.1 configuration utility?
From: Gerd Thier <thier@attglobal.net>
Had the same error.
If You click the local icon the remote process is started.
Foond in a german newsgroup in may 1999
the followin tip/fix
in the config.sys there was a statement missing
in my case, german
set tcplang=de_DE
this entry fixes my problem and the local icon starts the local
procedure.
Funny is't it.
--
MfG / Regards
Gerd
This system has been running for 0d 2h 34m 39s 312ms (en).
Dominique Pivard schrieb:
>
> Is there a default password in TCP/IP 4.1's Java-based configuration
> utility? I can't seem to remember I was ever asked to enter a password
> before.
>
> Thanks, Dominique
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)
+----------------------------------------------------------------------------+
From: mohd.k.yusof@bohm.anu.edu.au 21-Oct-99 10:34:20
To: All 21-Oct-99 03:14:02
Subj: Re: question
From: mohd.k.yusof@bohm.anu.edu.au (Khairil Yusof)
On Wed, 20 Oct 1999 11:37:45, "Alessandro Porcaro" <alexandjulia@mpx.com.au>
wrote:
> Joe is trying to use this program to send some data on his Macintosh
> computer to his friend's PC, but when his friend inspects the data, it is
> all garbled and in some cases, some of characters are in reverse order.
> Describe one possible reason why this might be happening and suggest what
> might be possible fix?
If you're using FTP (Fetch), then make sure that the type is RAW data on the
Mac.
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Australian National University (1:109/42)
+----------------------------------------------------------------------------+
From: domi@kenavo.NOSPAM.fi 21-Oct-99 05:51:10
To: All 21-Oct-99 03:14:02
Subj: Re: default password in TCP/IP 4.1 configuration utility?
From: domi@kenavo.NOSPAM.fi (Dominique Pivard)
On Wed, 20 Oct 1999 18:56:33, Gerd Thier <thier@attglobal.net> wrote:
> set tcplang=de_DE
I had tried that (set tcplang=en_US). After I added the missing
statement, I was no longer asked for an ID / password, but I got the
infamous error message telling me I can't run the local configuration
utility because the remote server is running.
> Funny is't it.
Well, to be frank with you, not so funny for me ;-)
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: None!! (1:109/42)
+----------------------------------------------------------------------------+
From: niclas.lindstrom@edt.ericsson.se 21-Oct-99 13:37:20
To: All 21-Oct-99 10:33:27
Subj: How do I read and write ethernet packets?
From: Niclas =?iso-8859-1?Q?Lindström?= <niclas.lindstrom@edt.ericsson.se>
Are there any API's in OS/2 that can be used to read and
write ehternet frames directly from/to the lan-adapter so
I can analyze the ethernet header, modify it and send it
back out on the ethernet again..?
Regards
Niclas Lindström
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: L M Ericsson Data AB (1:109/42)
+----------------------------------------------------------------------------+
From: andrea@NO.SPAM.NO.telematica.it 21-Oct-99 11:55:24
To: All 21-Oct-99 10:33:27
Subj: Re: Want OS/2 box to see Win98 Long file names
From: andrea@NO.SPAM.NO.telematica.it
In <940401947.1@natureboy.dyn.tj>, on 10/20/99
at 06:45 AM, derek.vance.steel@natureboy.dyn.tj said:
>How can I get my OS/2 machine to see Win98 long filenames.
>At the moment only 8.3 filenames showup when using the os/2 box to
> view files on a Win98 machine.
It depends on the WinXX machine. It happens both on Win95 and Win98 and it
depends on the way Win shows up to OS/2.
Actually I've been looking for a solution for a long time but I'd never
been able to find one.
Ciao Ciao,
[S]uper [K]eyby
-----------------------------------------------------------
a.brancatelli@delta.galileo.it (andrea@telematica.it)
-----------------------------------------------------------
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: MC-link The World On Line (1:109/42)
+----------------------------------------------------------------------------+
From: stephen-d@home.com 21-Oct-99 12:02:24
To: All 21-Oct-99 10:33:27
Subj: Using Warp 4 as a NFS server for Linux Install CD-ROM
From: stephen-d@home.com (Stephen)
I am installing Linux on a machine to use as a proxy server to the internet
for my home network.
The machine does not have a cd-rom. My Red Hat Linux Secrets explains the
Linus side of using a cd-rom on an NFS server, but I don't know the OS/2
side.
Can anyone point me in the direction of the information I need.
Many thanks.
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Rogers Wave (1:109/42)
+----------------------------------------------------------------------------+
From: sys1jak@is.ups.com 21-Oct-99 10:17:28
To: All 21-Oct-99 14:39:11
Subj: How to connect Warp v4 to Netware v5 using IP?
From: "Jim Kimball" <sys1jak@is.ups.com>
Does anyone know if there is a way/product that will support connecting OS/2
V4x to Novel Netware v5x via TCP/IP?
Thanks, Jim Kimball
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: UPS (1:109/42)
+----------------------------------------------------------------------------+
From: sholly@wcom.net 21-Oct-99 14:05:19
To: All 21-Oct-99 16:48:12
Subj: IPSec client for OS2
From: "Steve Holly" <sholly@wcom.net>
All,
Is there an IPSec client out there for OS2? I am looking for a way to
include OS2 devices in a VPN solution I am working on.
Thanks,
Steve Holly
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: CompuServe Interactive Services (1:109/42)
+----------------------------------------------------------------------------+
From: bschwand@dvart.com 21-Oct-99 13:36:00
To: All 21-Oct-99 20:06:28
Subj: Re: SOCKS5
From: bruno schwander <bschwand@dvart.com>
yes, in the os/2 tcpip configuration notebook, there is one page where
you specify the socks server to use. (and enable sock proxy)
once you've done that, all internet apps are socksified !
bruno
mr_ace@gmx.de wrote:
> Hi folks!
>
> I'm going to try to access the internet through a SOCKS5 server.
> Is there any way to do that with OS/2 Warp 4 and TCP/IP 4.1??
> I tried to connect to the ICQ-Server with ICQ for Java, but I
> didn't get any contact... :-(
>
> Does someone know what I have to do??
>
> Thanxx for your answers!
>
> Cu!
>
> Andi
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Posted via Supernews, http://www.supernews.com (1:109/42)
+----------------------------------------------------------------------------+
From: news@sau.edu 21-Oct-99 16:38:02
To: All 21-Oct-99 20:06:28
Subj: netscape 4.6 stops working
From: AC <news@sau.edu>
Hi,
I just reloaded OS/2 verson 4.0. using service pack 9 on it.
I just installed netscape 4.6. It will run and then it will just stop
and go away.
It will close on you and dissapear.
I remember a few weeks back reading in the news postings about some
netscape 4.6 bugs and things to do to fix it.
Can anyone repost how to fix the bugs?
I am doing this from a public lab so you can not reply to the post.
my e-mail is chadpaul@netexpress.net
Thank you
Chad Pauli
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: netINS, Inc. (1:109/42)
+----------------------------------------------------------------------------+
From: bvermo@powertech.no 21-Oct-99 22:37:12
To: All 21-Oct-99 21:24:22
Subj: Re: sendmail 8.9.1 & Aurora
From: =?iso-8859-1?Q?Bj=F8rn?= Vermo <bvermo@powertech.no>
Peter Moylan wrote:
> ... In another posting in this thread I mentioned
> a POPGET.CMD that's included with Weasel. Take a look at it, it might
> be what you need.
It did not seem to be included with the version I had tried, so I went to your
site in
orderto download the newest version. Unfortunately, it timed out three times.
Either my
connections in that direction are slow, or the server was overloaded. I
therefore tried
Hobbes. It looks like those old philosophers have problems keeping up with
change, for
the version I got was 0.8, which did not have any POPGET.CMD (or any other
command
file) in it.
>
> Other people have asked for this, so the latest version looks for a file
> called "Online" before sending outbound mail - you can create and
> destroy this file as needed. (It could be done with semaphores, but
> not everyone understands semaphores. Doing it based on the presence
> of a file means that people can easily move the file as part of their
> dialler script.)
I see the point, but will not this cause some overhead? Unless I am mistaken,
you would
have to poll for the existence of the file. I think a ready-made skeleton REXX
program
to set the event semaphore would be easy enough for most people. I am more
concerned
that it might be more work to implement it than you (or I, for that sake,
since you
have kindly released the source) can spare the time for. Not that I have used
Modula 2
since about the time it was first released for DOS - I have an early version
of M2SDS
somewhere...
Is the compiler you use a big download, and is the free version usable for a
one-time
compile of Weasel? Or are not the fetch routines in a separate thread for each
external
server, so that it would be a non-trivial job to implement this?
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Norbionics (1:109/42)
+----------------------------------------------------------------------------+
From: asuri@vpub.powernet.co.uk 20-Oct-99 23:07:01
To: Stevie@Stevienet.co.uk 21-Oct-99 21:24:23
Subj: Re: Stupid network question
To: Stevie <Stevie@Stevienet.co.uk>
From: Adrian Suri <asuri@vpub.powernet.co.uk>
This is a multi-part message in MIME format.
--------------72A31672C033347A3DEF72C9
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
I am sure it can be done, if you go to
hobbes.nmsu.edu, and do a search on lan and tcpip you will
find a file which add networking capabilities to OS/2 Warp three,
if you can't find it email me and will will see where it is on my hard drive
Adrian
Stevie wrote:
> For years I have had a copy of OS/2 Warp v3 with Bonux Pack sat on my shelf
> doing nothing, now I have decided to try it out (mainly out of curiosity)
> however I have ht upon a wonderful problem, just how do I connect it to my
> LAN ?
>
> The machine is a P150 Compaq Prosignia 500. I have downloaded all the
> softpacs from Compaq but I cannot get the machine to install the net card
> drivers. It keeps complaining about not having a 'profile control file'. Any
> help will be appreciated I know the machine is sound as it previously ran
> SCO Open Server with no problems.
>
> Stevie
--
asuri@vpub.powernet.co.uk
http://users.powernet.co.uk/vpub
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.2i
mQBtAzfIYMAAAAEDAMV0uyy3X0ndMt1H0xPl4BJOJYYj08HlybF6KcHFXCSc34j4
l8mp4xzOfm8WoBO97d7aiPXVykTTAXLLomha/oESJXY1B9BPmpyn0597VnulZFoq
FpBVrjpbCywOabioRQAFEbQmQWRyaWFuIFN1cmk8YXN1cmlAdnB1Yi5wb3dlcm5l
dC5jby51az4=
=hcQ/
-----END PGP PUBLIC KEY BLOCK-----
--------------72A31672C033347A3DEF72C9
Content-Type: text/x-vcard; charset=us-ascii;
name="asuri.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Adrian Suri
Content-Disposition: attachment;
filename="asuri.vcf"
begin:vcard
n:Suri;Adrian
tel;home:0121 2497283
x-mozilla-html:FALSE
org:Virtual Publications
adr:;;;;;;
version:2.1
email;internet:asuri@vpub.powernet.co.uk
fn:Adrian
end:vcard
--------------72A31672C033347A3DEF72C9--
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Virtual Publications (1:109/42)
+----------------------------------------------------------------------------+
From: asuri@vpub.powernet.co.uk 20-Oct-99 23:22:21
To: All 21-Oct-99 21:24:23
Subj: Re: Stupid network question
From: Adrian Suri <asuri@vpub.powernet.co.uk>
This is a multi-part message in MIME format.
--------------6E135F94357C600FEA65D72B
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Found it the file I spoke of in my first reply is at hobbes and is:
ftp://hobbes.nmsu.edu/pub/os2/apps/internet/util/freetcp.zip
I have not tried it as I have OS/2 Warp Four, you might need some other files,
as well,
but the instruction tell you
AdrianSuri
Stevie wrote:
> For years I have had a copy of OS/2 Warp v3 with Bonux Pack sat on my shelf
> doing nothing, now I have decided to try it out (mainly out of curiosity)
> however I have ht upon a wonderful problem, just how do I connect it to my
> LAN ?
>
> The machine is a P150 Compaq Prosignia 500. I have downloaded all the
> softpacs from Compaq but I cannot get the machine to install the net card
> drivers. It keeps complaining about not having a 'profile control file'. Any
> help will be appreciated I know the machine is sound as it previously ran
> SCO Open Server with no problems.
>
> Stevie
--
asuri@vpub.powernet.co.uk
http://users.powernet.co.uk/vpub
-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.2i
mQBtAzfIYMAAAAEDAMV0uyy3X0ndMt1H0xPl4BJOJYYj08HlybF6KcHFXCSc34j4
l8mp4xzOfm8WoBO97d7aiPXVykTTAXLLomha/oESJXY1B9BPmpyn0597VnulZFoq
FpBVrjpbCywOabioRQAFEbQmQWRyaWFuIFN1cmk8YXN1cmlAdnB1Yi5wb3dlcm5l
dC5jby51az4=
=hcQ/
-----END PGP PUBLIC KEY BLOCK-----
--------------6E135F94357C600FEA65D72B
Content-Type: text/x-vcard; charset=us-ascii;
name="asuri.vcf"
Content-Transfer-Encoding: 7bit
Content-Description: Card for Adrian Suri
Content-Disposition: attachment;
filename="asuri.vcf"
begin:vcard
n:Suri;Adrian
tel;home:0121 2497283
x-mozilla-html:FALSE
org:Virtual Publications
adr:;;;;;;
version:2.1
email;internet:asuri@vpub.powernet.co.uk
fn:Adrian
end:vcard
--------------6E135F94357C600FEA65D72B--
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Virtual Publications (1:109/42)
+----------------------------------------------------------------------------+
From: kris@dgraph.com 21-Oct-99 17:11:26
To: All 21-Oct-99 21:24:23
Subj: Re: IPSec client for OS2
From: Kris Kadela <kris@dgraph.com>
Steve Holly wrote:
>
> All,
>
> Is there an IPSec client out there for OS2? I am looking for a way to
> include OS2 devices in a VPN solution I am working on.
>
> Thanks,
>
> Steve Holly
InJoy firewall Professional
http://www.fx.dk/firewall/register.html
--
**********************
DigiGraph Technical
http://www.dgraph.com
**********************
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: DigiGraph Technical (1:109/42)
+----------------------------------------------------------------------------+
From: peter@seagoon.newcastle.edu.au 22-Oct-99 00:14:14
To: All 22-Oct-99 02:30:00
Subj: Re: sendmail 8.9.1 & Aurora
From: peter@seagoon.newcastle.edu.au (Peter Moylan)
Bj¢rn Vermo <bvermo@powertech.no> wrote:
>Peter Moylan wrote:
>
>> ... In another posting in this thread I mentioned
>> a POPGET.CMD that's included with Weasel. Take a look at it, it might
>> be what you need.
>
>It did not seem to be included with the version I had tried, so I went to
your site in
>orderto download the newest version. Unfortunately, it timed out three times.
Either my
>connections in that direction are slow, or the server was overloaded. I
therefore tried
>Hobbes. It looks like those old philosophers have problems keeping up with
change, for
>the version I got was 0.8, which did not have any POPGET.CMD (or any other
command
>file) in it.
That's my fault, I'm afraid. It's a nuisance keeping all archives
synchronised,
so I have a policy of uploading to Hobbes only when the version reaches a
round number. The present version is 0.88, which means that version 0.9 is
due out soon (and will be uploaded to Hobbes), but meanwhile the version on
Hobbes is a bit out of date.
Your problem with connecting to my server might have been a transient one.
We've had quite a few power failures here lately, partly due to bad
weather but mostly due to Y2K testing. (The "solutions" for this Y2K bug
are turning out to be worse than the problem they're supposed to fix.)
My own server, running OS/2, can reboot automatically after a power
failure, but some of our local routers, running Unix, don't recover
gracefully. It's possibly that a new attempt to download will succeed.
If there's genuinely a problem with a bad connection (quite possible, because
the route from Australia to Norway wanders through all sorts of countries)
then I'd highly recommend awget: it's good at resuming failed downloads.
Meanwhile, POPGET.CMD itself is small, so I've e-mailed you a copy.
>> Other people have asked for this, so the latest version looks for a file
>> called "Online" before sending outbound mail - you can create and
>> destroy this file as needed. (It could be done with semaphores, but
>> not everyone understands semaphores. Doing it based on the presence
>> of a file means that people can easily move the file as part of their
>> dialler script.)
>
>I see the point, but will not this cause some overhead? Unless I am mistaken,
you would
>have to poll for the existence of the file.
The overhead isn't all that bad. A checking thread looks for the file
every minute or so, but apart from that that thread spends all its time
asleep.
>Is the compiler you use a big download, and is the free version usable for a
one-time
>compile of Weasel?
This would probably be more trouble than it's worth. I'm not sure what
the trial version of the compiler does these days - the XDS policy on
this varies from time to time, depending on what they're up to - but
there's a risk that you'd run into errors like "program too large for
demo version" or similar.
> Or are not the fetch routines in a separate thread for each external
>server, so that it would be a non-trivial job to implement this?
The business about fetching from other servers isn't even part of the
Weasel code, it's a separate Rexx script. You could even use that
script without installing Weasel.
--
Peter Moylan peter@ee.newcastle.edu.au
See http://eepjm.newcastle.edu.au for OS/2 information and software
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: The University of Newcastle (1:109/42)
+----------------------------------------------------------------------------+
From: abstewa@attglobal.net 21-Oct-99 22:34:15
To: All 22-Oct-99 02:30:01
Subj: Re: netscape 4.6 stops working
From: Alon Stewart <abstewa@attglobal.net>
Most likely the cert7.db file in the 4.04 directory has become corrupt.
It is in the Users\ subdirectory. Delete the file and re-install
Netscape 4.61.
AC wrote:
> Hi,
>
> I just reloaded OS/2 verson 4.0. using service pack 9 on it.
> I just installed netscape 4.6. It will run and then it will just stop
> and go away.
> It will close on you and dissapear.
>
> I remember a few weeks back reading in the news postings about some
> netscape 4.6 bugs and things to do to fix it.
> Can anyone repost how to fix the bugs?
>
> I am doing this from a public lab so you can not reply to the post.
> my e-mail is chadpaul@netexpress.net
>
> Thank you
>
> Chad Pauli
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)
+----------------------------------------------------------------------------+
From: sma.spam-not@rtd.com 22-Oct-99 04:05:27
To: All 22-Oct-99 02:30:01
Subj: Re: LPRMON + LPD
From: James Moe <sma.spam-not@rtd.com>
bruno schwander wrote:
>
> what ????
> I thought LPRPORTD.EXE is there specifically to do that, redirect an lpt
port to a
> print queue !
> I may be wrong, since I can't read the doc right now, but it is worth
checking...
>
My meaning was that os/2 cannot send print jobs to printers that do
not have one of the following:
1. an LPD service.
2. a JetDirect-type network interface. (It uses the 802.2 protocol.)
LPRPORTD only enables os/2 to send jobs to a LPD/LPR server. It
still requires an LPD service on the receiving end.
Using LPRMON still requires an LPD service on the receiving end. It
only redirects jobs at a LPT port to the LPD/LPR server.
I even had a situation that needed both of these services.
First I enabled the LPD, LPRPORTD daemons. Next I set up one printer
object to connect to the printer (which has an LPD service) using one of
the LPD port drivers. Then I created another printer, using the same
printer driver as the first, and connected its output to an LPT port.
Finally I used LPRMON to redirect the 2nd printer's output to the first
printer. A pretty hokey setup but it get to use a printer that I would
otherwise not have access to.
--
sma at rtd dot com
Remove ".spam-not" for email
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42)
+----------------------------------------------------------------------------+
From: sma.spam-not@rtd.com 22-Oct-99 04:14:25
To: All 22-Oct-99 05:24:03
Subj: Re: Using Warp 4 as a NFS server for Linux Install CD-ROM
From: James Moe <sma.spam-not@rtd.com>
Stephen wrote:
>
> I am installing Linux on a machine to use as a proxy server to the internet
> for my home network.
>
> The machine does not have a cd-rom. My Red Hat Linux Secrets explains the
> Linus side of using a cd-rom on an NFS server, but I don't know the OS/2
> side.
>
> Can anyone point me in the direction of the information I need.
>
Yes, it can be done (I have done that same thing). Do you have the
NFS package? That is not a standard feature in Warp. You must buy that
separately.
If you have it, add the drive to the EXPORTS file in the c:\mptn\etc
directory, restart the NFSD, the NFS server. You can also do this
through the configuration notebook(s).
--
sma at rtd dot com
Remove ".spam-not" for email
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Sohnen-Moe Associates, Inc (1:109/42)
+----------------------------------------------------------------------------+
From: dwparsons@t-online.de 22-Oct-99 08:26:23
To: All 22-Oct-99 05:24:03
Subj: Re: sendmail 8.9.1 & Aurora
From: dwparsons@t-online.de (Dave Parsons)
On Fri, 22 Oct 1999 00:14:29, peter@seagoon.newcastle.edu.au (Peter Moylan)
wrote:
> Bj╜rn Vermo <bvermo@powertech.no> wrote:
> >Peter Moylan wrote:
> >
>
> If there's genuinely a problem with a bad connection (quite possible,
because
> the route from Australia to Norway wanders through all sorts of countries)
> then I'd highly recommend awget: it's good at resuming failed downloads.
>
< snip >
> --
> Peter Moylan
peter@ee.newcastle.edu.au
> See http://eepjm.newcastle.edu.au for OS/2 information and software
FYI, I downloaded 0.88 from your site at 11:20 local time here in Germany
on the 19th. with no real problems. It was just a bit slow. ca 4K on ISDN.
It sounds interesting and might be able to provide a service which I need
but I haven't had the time to check it out yet. Another job for the weekend.
Thanks,
--
Dave
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: CDL (1:109/42)
+----------------------------------------------------------------------------+
From: niclas.lindstrom@edt.ericsson.se 22-Oct-99 10:26:24
To: All 22-Oct-99 10:21:21
Subj: Re: How do I read and write ethernet packets?
From: Niclas =?iso-8859-1?Q?Lindström?= <niclas.lindstrom@edt.ericsson.se>
Niclas Lindström wrote:
>
> Are there any API's in OS/2 that can be used to read and
> write ethernet frames directly from/to the lan-adapter so
> I can analyze the ethernet header, modify it and send it
> back out on the ethernet again..?
>
Ok, I believe I will have to write my own intermediate
NDIS-driver. Does anyone know were I can find good source
samples for NDIS drivers. I just downloaded the DDK from
IBM and at the first look at the sample in there (a token
ring driver) it looks too complex. I guess it includes
hardware access and things like that, but my driver only
need to access the existing NDIS driver and act as any
NDIS driver towards the application (TCP/IP-stack)...
Regards
Niclas Lindström
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: L M Ericsson Data AB (1:109/42)
+----------------------------------------------------------------------------+
From: jknott@ibm.net 22-Oct-99 05:51:19
To: All 22-Oct-99 10:21:21
Subj: Re: OS/2 Warp Bootsdisk with TCPIP
From: jknott@ibm.net (James Knott)
In article <7ukctn$2mv$1@nnrp1.deja.com>, moerli@my-deja.com wrote:
>What is the easiest Way to create a Warp Bootdisk which will connect a
>Thinkpad (PCMCIA) to a NT-Server?
If you mean a single bootable floppy, I don't think it can be done. I
have seen single bootable floppies for OS/2, but they didn't have much
free space left for anything else. You may be able to do it with 2 or
3 diskettes. At work, when we need a bootable floppy that can access
a server, we use PC-DOS 7.
--
E-mail jknott@ca.ibm.com
_________________________________________________________________________
The above opinions are my own and not those of ISM Corp., a subsidiary of
IBM Canada Ltd.
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Global Network Services - Remote Access Mail & Ne
(1:109/42)
+----------------------------------------------------------------------------+
From: dropThis.DenverD@ibm.net 22-Oct-99 11:51:12
To: All 22-Oct-99 10:21:22
Subj: Re: IPSec client for OS2
From: dropThis.DenverD@ibm.net (DenverD )
In message <7unkp8$fn$1@ssauraac-i-1.production.compuserve.com> -
"Steve Holly" <sholly@wcom.net> writes:
>
>All,
>
> Is there an IPSec client out there for OS2? I am looking for a way to
>include OS2 devices in a VPN solution I am working on.
the answer to your needs are at www.fx.dk
--
DenverD AT ibm DOT net
CAUTION: All addresses are anti-spam spoofs.
you gotta fix'em up to mail me...sorry!
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: www.Texan.dk (1:109/42)
+----------------------------------------------------------------------------+
From: w.h.m.wauters.1998@cranfield.ac.uk 22-Oct-99 13:13:20
To: All 22-Oct-99 10:21:22
Subj: Re: Want OS/2 box to see Win98 Long file names
From: Wim Wauters <w.h.m.wauters.1998@cranfield.ac.uk>
Lorne Sunley wrote:
> On Wed, 20 Oct 1999 06:45:47, derek.vance.steel@natureboy.dyn.tj
> wrote:
>
> > Hello All.
> >
> > How can I get my OS/2 machine to see Win98 long filenames.
> >
> > At the moment only 8.3 filenames showup when using the os/2 box to
> > view files on a Win98 machine.
> >
>
> I don't believe this is possible. The implementation of the
> SMB network (NETBIOS) in Windows 95/98 will not negotiate
> a session with the implementation in OS/2 that will allow the
> transfer of long file name information.
>
> Lorne Sunley
Yep ! Another one from Redmond ;-)
They made it work perfectly for NT though, strange isn't it ?
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Sirius Cybernetics Corporation (1:109/42)
+----------------------------------------------------------------------------+
From: mike_diack@hotmail.com 22-Oct-99 14:23:25
To: All 22-Oct-99 12:35:25
Subj: Any hints on how to link a Warp 3 desktop PC to an NT server.
From: "Mike Diack" <mike_diack@hotmail.com>
Hi, following a migration issue whereby our OS/2 PC's were talking to
and making read/write access to files on a Netware server, it's been decided
to move
the files over to an NT server.
We've obviously been using the OS/2 IPX client in the past to talk to
Netware, what's the
best way of talking (via IP) to the NT server in the same sort of way (the
problem being that we have masses of scripts that just use conventional
Netware drive mapping techniques) and to fix them up (even if I knew for
def. that the IP approach will work), will take time.
Is there some sort of IPX emulation layer available to minimise the work, or
am I gonna have to just bite the bullet on this, and start hacking and
experimenting.......?
Any help, greatly appreciated!
Thanks
Mike
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Varian Associates (1:109/42)
+----------------------------------------------------------------------------+
From: lsunley@mb.sympatico.ca 22-Oct-99 15:46:13
To: All 22-Oct-99 14:21:14
Subj: Re: Any hints on how to link a Warp 3 desktop PC to an NT server.
From: lsunley@mb.sympatico.ca (Lorne Sunley)
On Fri, 22 Oct 1999 13:23:50, "Mike Diack" <mike_diack@hotmail.com>
wrote:
> Hi, following a migration issue whereby our OS/2 PC's were talking to
> and making read/write access to files on a Netware server, it's been decided
> to move
> the files over to an NT server.
>
> We've obviously been using the OS/2 IPX client in the past to talk to
> Netware, what's the
> best way of talking (via IP) to the NT server in the same sort of way (the
> problem being that we have masses of scripts that just use conventional
> Netware drive mapping techniques) and to fix them up (even if I knew for
> def. that the IP approach will work), will take time.
>
> Is there some sort of IPX emulation layer available to minimise the work, or
> am I gonna have to just bite the bullet on this, and start hacking and
> experimenting.......?
>
> Any help, greatly appreciated!
If you have all Warp 3 clients, I hope you have Warp 3 Connect
as that version has the "File and Print Service" client that is
required to
talk to an NETBIOS/SMB type server (which is what NT is). The client
provides the file system that actually lets the client see the
files on the server.
If you do not have Warp 3 connect you will have to acquire
the "File and Print Services" client for Warp 3. It may be still
available from IBM but it usually comes with Warp Serve 4.
The entry level version of the server is still available. You have
to pay to license the client for each machine of course.
If you have to use an IP based protocol (assuming you require
routing capability for the network protocol) then you will also
have to have the TCP/IP stack for OS/2 installed on the clients
so you can install NETBIOS over TCP/IP. This all is
available on Warp 3 Connect (or Warp 4 but that will
require upgrading the client machines).
The netware MAP command (if that's what you are using
in the scripts) has an equivalent NET USE command
that is used for NETBIOS/SMB type clients to map drivers
for server resources.
I have no idea if NT server supports a novell emulation
for clients. If it did that would be the best way to do the
change over. I think you are going to have to bite the
bullet as the support for Novell type clients has to be
on the server.
<Obvious advocacy paragraph>
BTW - If you purchase Warp Server for the client code
you might as well pitch out the NT server code and use
Warp Server, it provides about twice the throughput of
NT server on equivalent hardware. You could even
spring for Warp Server Advanced SMP or Warp Server
for e-Business (the latest one) and have the best scalable
SMP support available for PC based servers. (and usually
is more stable - less or no crashes). You can even gateway
to the Novell server for file and print access until you get
all the clients switched over, and then move the data files.
<\Obvious advocacy paragraph>
Lorne Sunley
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: MBnet Networking Inc. (1:109/42)
+----------------------------------------------------------------------------+
From: evsi@naverex.kiev.ua 22-Oct-99 13:14:08
To: All 22-Oct-99 21:23:08
Subj: Re: IPSec client for OS2
From: evsi@naverex.kiev.ua (Sergey I. Yevtushenko)
On Thu, 21 Oct 1999 18:05:38, "Steve Holly" <sholly@wcom.net> wrote:
Hi,
>
> Is there an IPSec client out there for OS2? I am looking for a way to
> include OS2 devices in a VPN solution I am working on.
It's bundled with TCP/IP 4.1 for OS/2.
Regards,
Sergey.
*--------------------------------------
ES@Home
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: ES@Home (1:109/42)
+----------------------------------------------------------------------------+
From: cmiller@io.com 22-Oct-99 18:40:27
To: All 22-Oct-99 21:23:08
Subj: Using External Zip 250 drive?
From: "Charlie Miller" <cmiller@io.com>
I now need more capacity than the Zip 100 (parallel port) drive
gives me so I purchased a new Zip 250 parallel port drive thinking I
could just swap them out. But No.
With Graham Norris's help I found a web page at IBM where I could
download a driver file (IOMEGA.EXE) that was documented as saying it
supported the external Zip 250 and the USB external Zip 250 drive.
However after unpacking it, all I got was a file IBMATAPI.FLT with
no instructions.
After several attempts to get it to work, I have given up. It would
seem like a driver with ATAPI in the name would refer to the
internal, ATAPI Zip 250.
Has anyone successfully installed a parallel port, Zip 250 drive. I
have both Warp 3 and Warp 4 machines that need these drives. Any
help would be greatly appreciated.
Charlie Miller
-----------------------
cmiller@io.com
--- WtrGate+ v0.93.p7 sn 165
* Origin: Usenet: Texian Systems, Inc. (1:109/42)
+----------------------------------------------------------------------------+
+============================================================================+