home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 14 Text
/
14-Text.zip
/
ldrem.zip
/
LDREM.INF
(
.txt
)
Wrap
OS/2 Help File
|
1995-04-19
|
820KB
|
5,834 lines
ΓòÉΓòÉΓòÉ 1. Version Notice ΓòÉΓòÉΓòÉ
Second Edition (March 1994)
The following paragraph does not apply to the United Kingdom or any country
where such provisions are inconsistent with local law: INTERNATIONAL BUSINESS
MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY
KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states
do not allow disclaimer of express or implied warranties in certain
transactions; therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors.
Changes are periodically made to the information herein; these changes will be
incorporated in new editions of the publication. IBM may make improvements
and/or changes in the product(s) and/or the program(s) described in this
publication at any time.
It is possible that this publication may contain reference to, or information
about, IBM products (machines and programs), programming, or services that are
not announced in your country. Such references or information must not be
construed to mean that IBM intends to announce such IBM products, programming,
or services in your country.
Requests for copies of this publication and for technical information about IBM
products should be made to your IBM Authorized Dealer or your IBM Marketing
Representative.
ΓòÉΓòÉΓòÉ 2. Notices ΓòÉΓòÉΓòÉ
References in this book to IBM products, programs, or services do not imply
that IBM intends to make these available in all countries in which IBM
operates. Any reference to an IBM product, program, or service is not intended
to state or imply that only IBM's product, program, or service may be used. Any
functionally equivalent product, program, or service that does not infringe any
of IBM's intellectual property rights or other legally protectible rights may
be used instead of the IBM product, program, or service. Evaluation and
verification of operation in conjunction with other products, programs, or
services, except those expressly designated by IBM, are the user's
responsibility.
IBM may have patents or pending patent applications covering subject matter in
this document. The furnishing of this document does not give you any license to
these patents. You can inquire, in writing, to:
o IBM Director of Licensing Services, IBM Corporation, 208 Harbor Drive,
Stamford, CT 06904, USA.
Asia-Pacific users can inquire, in writing, to:
o IBM Director of Licensing Services, IBM Kamiya-cho Building, 4-3-9 Toranomon,
Minato-ku, Tokyo 105, Japan.
ΓòÉΓòÉΓòÉ 2.1. Trademarks ΓòÉΓòÉΓòÉ
The following terms, denoted by an asterisk (*) in this book, are trademarks of
the IBM Corporation in the United States or other countries or both:
AS/400 DATABASE 2 for OS/2
Extended Services First Failure Support Technology/2
FFST/2 IBM
LAN Distance Micro Channel
NetView Operating System/2
OS/2 Person to Person/2
PS/2 Time and Place/2
WaveRunner
The following terms, denoted by a double asterisk (**) in this book, are
trademarks of other companies as follows:
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé TRADEMARK Γöé OWNED BY Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé cc:Mail Γöé cc:Mail, Inc., a subsidiary of Lotus Γöé
Γöé Γöé Development Corp. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Ethercard PLUS Γöé Standard Microsystems Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé LAN Manager, Microsoft and Windows Γöé Microsoft Corporation Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé LANtastic Γöé Artisoft, Inc. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Lotus and Lotus Notes Γöé Lotus Development Corporation Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Madge and Straight Blue Γöé Madge Networks, Inc. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NetWare and Novell Γöé Novell, Inc. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé VINES Γöé Banyan Systems, Inc. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Data Race and RediCard Γöé Data Race, Inc. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes, OPTIMA and ULTRA Γöé Hayes Microcomputer Products, Inc. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Microcom, MicroPorte, and QX/4232bis Γöé Microcom Systems, Inc. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Multi-Tech Γöé Multi-Tech Systems, Inc. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Racal-Datacom Γöé Racal Electronics Plc. Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ROLM Γöé ROLM Systems Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé SupraFAX Modem Γöé Supra Corporation Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Telebit and TrailBlazer Γöé Telebit Corporation Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé U.S. Robotics, Sportster 14400, Γöé U.S. Robotics, Inc. Γöé
Γöé WorldPort 14400, and Courier HST Dual Γöé Γöé
Γöé Standard Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé UDS and FASTALK 32bx Γöé Universal Data Systems, Inc. Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 3. About This Book ΓòÉΓòÉΓòÉ
This book is for LAN Distance* Remote workstation users who are installing the
IBM* LAN Distance Remote version 1.1 product for the first time and who need to
configure an asynchronous modem to dial out to a LAN Distance Connection Server
or another LAN Distance Remote.
If you are setting up an ISDN adapter, synchronous adapter, or an ARTIC
multiport adapter for a LAN Distance Remote, refer to Information Guide to LAN
Distance Remote Features. This table points you to the information you need to
set up these types of WAN hardware for the LAN Distance Remote product.
ΓòÉΓòÉΓòÉ 3.1. Prerequisite Information ΓòÉΓòÉΓòÉ
Before you read this book, you should have a working knowledge of:
o How to use the Operating System/2* or MS Windows** interface to navigate
windows, open objects, and access information from menus.
o How to access and start the LAN applications you plan to use with the LAN
Distance Remote product.
o The terminology used to describe local area networks (LANs) and wide area
networks (WANs) and the hardware used for network communications.
ΓòÉΓòÉΓòÉ 3.2. Organization ΓòÉΓòÉΓòÉ
This book has 12 chapters and four appendices:
o Introducing the LAN Distance Remote Product, identifies some key features of
the LAN Distance Remote product, and lists documentation that supplements
the information provided here.
o Quick Start for OS/2, summarizes the required steps for installing and
configuring the LAN Distance Remote product for OS/2.
o Quick Start for MS Windows Workstations, summarizes the required steps for
installing and configuring the LAN Distance Remote product for MS Windows.
o Installing the LAN Distance Remote Product, covers preinstallation tasks,
installation steps, and related topics, such as removing the LAN Distance
Remote product.
o Configuring the LAN Distance Product Using Basic Settings, explains how to
configure the LAN Distance Remote product using the Basic Settings
configuration option.
o Using the LAN Distance Product with MS Windows, describes the objects and
actions you can select from the LAN Distance Workstations window.
o Using the LAN Distance Product for OS/2, describes the objects and actions
you can select from the LAN Distance Workstations window.
o Setting Up LAN Distance to Run LAN Applications, provides setup information
for using your LAN applications over a LAN Distance connection.
o Setting Up Phone Book Entries in the LAN Distance Phone Book, describes how
to add phone book entries for LAN Distance workstations you want to call.
o Using the Phone Book to Establish a Connection, tells you how to dial out
using the LAN Distance phone book to establish a connection to another LAN
Distance workstation.
o Answering Incoming Calls for OS/2 Workstations, describes how to set up your
workstation to answer calls from other LAN Distance workstations.
o Answer Mode Window for MS Windows Workstations, describes how to set up your
workstation to answer calls from other LAN Distance workstations.
o Using the Shuttle Feature for OS/2, tells you how to enable and invoke the
Shuttle feature, and covers considerations for installing LAN applications
after you have installed the LAN Distance Remote product.
o Using the Shuttle Feature for MS Windows, tells you how to enable and invoke
the Shuttle feature, and covers considerations for installing LAN
applications after you have installed the LAN Distance Remote product.
o Hardware Supported for the LAN Distance Remote Product, lists the hardware
you can use with the LAN Distance Remote product.
o Setup Considerations for Some Popular LAN Applications, describes setup
considerations for some popular LAN applications.
o Using LAN Distance Commands for OS/2 Workstations, describes the LAN Distance
commands that you can use to create .CMD files to perform LAN Distance tasks.
o What to Do If Your Modem Is Not Listed, describes steps for setting up a
modem that is not listed.
ΓòÉΓòÉΓòÉ 3.3. Conventions ΓòÉΓòÉΓòÉ
Glossary Terms that describe remote LAN access products or processes may
be new to you. If you have a question about a word or a phrase,
refer to the Glossary.
ΓòÉΓòÉΓòÉ 3.4. Related Publications ΓòÉΓòÉΓòÉ
Additional information about LAN Distance Remote features is contained in:
o IBM LAN Distance Advanced Guide
o IBM LAN Distance Online Helps
o IBM LAN Distance Task Index
o IBM LAN Distance Where & How Online Information
o IBM LAN Distance Configuration and Customization Guide
ΓòÉΓòÉΓòÉ 4. Introducing the LAN Distance Remote Product ΓòÉΓòÉΓòÉ
The LAN Distance Remote product allows you to access LAN data, resources, and
applications from your stand-alone workstation. You can access resources by
dialing a LAN Distance Connection Server on a Token-Ring or Ethernet LAN, or by
dialing another LAN Distance Remote. When you use the LAN Distance Remote
product to connect to your LAN, you can access LAN resources as if you were
physically attached to the LAN. Remote-to-LAN Environment shows the
remote-to-LAN environment supported by the LAN Distance Remote product.
Remote-to-LAN Environment
ΓòÉΓòÉΓòÉ 4.1. Product Highlights ΓòÉΓòÉΓòÉ
The LAN Distance Remote product has the following features:
o Ability to run your LAN applications unmodified over a standard, switched
telephone line connecting your LAN Distance Remote to your office LAN.
o Support for OS/2 version 2.0 (or later) and MS Windows 3.1.
o Support for two environments: remote-to-LAN and remote-to-remote.
o A simple installation and Basic Settings configuration path to set up your
asynchronous hardware to use the LAN Distance Remote product.
o Automated configuration that lets you easily switch from a remote to a LAN
workstation using the Shuttle feature of the LAN Distance Remote product.
o An easy-to-use, object-oriented graphical interface.
o Administrative tools, such as security for your workstation's resources,
auditing of logon attempts, and the ability to view call connection status.
o Dialing and answering options, which allow you to autostart your LAN
applications.
o A command line interface that lets you build command files to automate
dialing tasks and autostart applications.
ΓòÉΓòÉΓòÉ 4.2. The LAN Distance Remote Product for MS Windows ΓòÉΓòÉΓòÉ
The basic features of the LAN Distance Remote product are supported for both
the OS/2 and the MS Windows versions of the product. The following LAN
Distance Remote features are not supported, or are not fully supported for the
MS Windows version:
o Administrative tools, such as Audit and Call and Port Management, are not
supported in the MS Windows version.
o LAN Distance Remote MS Windows workstation users, like LAN Distance Remote
OS/2 workstations users, can dial into a secure LAN Distance Connection
Server and change their passphrases. Local security is not supported on the
MS Windows workstations.
o LAN Distance Remote for MS Windows supports an asynchronous COM port
connection. ISDN and synchronous connections are not supported for MS Windows
workstations.
o Only one asynchronous COM port connection (COM1 through COM4) is supported
for LAN Distance Remote MS Windows workstations. Multiport configuration and
ARTIC multiport adapters are not supported for MS Windows workstations.
o Setting up a LAN Distance Remote MS Windows workstation to answer calls is
different from setting up a LAN Distance Remote OS/2 workstation. See Answer
Mode Window for MS Windows Workstations.
o Serial device support is automatically loaded for MS Windows workstations.
MS Windows detects the existence of up to four COM ports on your LAN Distance
MS Windows workstation, but cannot guarantee whether these ports are in use.
o Installation using diskettes is supported for LAN Distance Remote for MS
Windows. Redirected drive installation using the LDIMAGE program and response
file installation is not supported for MS Windows workstations.
The error message file, WALINST.LOG, is not accessible for LAN Distance
Remote MS Windows workstations.
o The LDREMOVE utility used to remove the LAN Distance Remote for MS Windows
files does not archive your LAN Distance user configuration files.
o The LAN Distance Remote for MS Windows product does not supply or install all
LAN networking software. Use LSP** (LAN Support Program) to run 802.2
applications on your stand-alone LAN Distance Remote. If you plan to shuttle
to the LAN-attached environment, use LSP to install the necessary LAN
protocols for your LAN applications.
o The Shuttle feature for LAN Distance Remote for MS Windows is installed as an
icon in the LAN Distance container, and can be invoked by double-clicking on
this icon. This feature is documented in Using the Shuttle Feature for MS
Windows.
ΓòÉΓòÉΓòÉ 4.3. LAN Distance Remote Information Library ΓòÉΓòÉΓòÉ
This book is designed to be used with the online information provided in the
Helps, task index, and Where & How.
Helps
Online Helps contain information to help you make window selections.
Select the Help push button from any window to access help information for
the window.
task index
The task index is a comprehensive index of LAN Distance tasks. To access
the task index from the LAN Distance Workstations window, select Help from
the menu bar and Help index from the pull-down menu. (For MS Windows,
select Contents from the menu bar.)
You can also access the task index from any LAN Distance window by
selecting the Help push button, then selecting the Index push button.
Where & How Online Information
This online document identifies where you can complete configuration tasks
within the LAN Distance Settings notebook and describes how to modify your
existing configuration through the Settings notebook.
To access Where & How, double-click on the Where & How push button from
the Information tab in the Settings notebook.
LAN Distance Advanced Guide
The LAN Distance Advanced Guide documents more complex LAN Distance Remote
functions not documented in this book.
ΓòÉΓòÉΓòÉ 4.4. Information Guide for LAN Distance Remote Features ΓòÉΓòÉΓòÉ
LAN Distance Remote featuresnot covered in this book. This table also indicates
whether a feature is supported for the OS/2 or MS Windows version of the LAN
Distance Remote product.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Information Guide to LAN Distance Remote Features Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé PRODUCT FEATURE Γöé INFORMATION SOURCES Γöé OS/2 Γöé MS Γöé
Γöé Γöé Γöé Γöé WINDOWΓöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Installing LAN Distance Remote Γöé LAN Distance Advanced Guide Γöé X Γöé Γöé
Γöé using a redirected drive Γöé Helps and task index Γöé Γöé Γöé
Γöé (LDIMAGE) installation method Γöé Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Setting up a second asynchro- Γöé LAN Distance Advanced Guide Γöé X Γöé Γöé
Γöé nous modem Γöé Helps and task index Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Setting up an ISDN adapter Γöé LAN Distance Advanced Guide Γöé X Γöé Γöé
Γöé Γöé Helps and task index Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Setting up an ARTIC adapter Γöé LAN Distance Advanced Guide Γöé X Γöé Γöé
Γöé Γöé Helps and task index Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Setting up a synchronous Γöé LAN Distance Advanced Guide Γöé X Γöé Γöé
Γöé adapter Γöé Helps and task index Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Changing your WAN hardware Γöé LAN Distance Advanced Guide Γöé X Γöé X Γöé
Γöé setup Γöé Helps and task index Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Setting up your modem if it is Γöé LAN Distance Advanced Guide Γöé X Γöé X Γöé
Γöé not listed as a modem type Γöé Helps and task index Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Setting up a nonswitched Γöé LAN Distance Advanced Guide Γöé X Γöé X Γöé
Γöé (leased) telephone line Γöé Helps and task index Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Customizing modem dial strings Γöé LAN Distance Advanced Guide Γöé X Γöé X Γöé
Γöé to use your dialing credit card Γöé Helps and task index Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Setting up user accounts for Γöé LAN Distance Advanced Guide Γöé X Γöé Γöé
Γöé your secure LAN Distance work- Γöé Helps and task index Γöé Γöé Γöé
Γöé station Γöé Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Using Call and Port Management Γöé LAN Distance Advanced Guide Γöé X Γöé Γöé
Γöé Γöé Helps and task index Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Troubleshooting tips Γöé LAN Distance Advanced Guide Γöé X Γöé X Γöé
Γöé Γöé Where & How Online Information Γöé Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 5. Quick Start for OS/2 ΓòÉΓòÉΓòÉ
This chapter summarizes the tasks required to set up your LAN Distance Remote.
Begin LAN Distance setup by reviewing the required tasks listed in Checklist
for Installation and Basic Settings Configuration.
ΓòÉΓòÉΓòÉ 5.1. Using the Installation and Basic Settings Configuration Checklist for OS/2 ΓòÉΓòÉΓòÉ
Checklist for Installation and Basic Settings Configuration divides setup tasks
into required and optional categories and cross-references tasks to topics in
this book or in another information source.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Checklist for Installation and Basic Settings Configuration Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TASK Γöé GO TO... Γöé DONE Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé (X) Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé REQUIRED SETUP TASKS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1) Install prerequisite hardware Γöé Hardware and Software Γöé Γöé
Γöé and software. Γöé Requirements Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 2) Install the LAN applications Γöé Installing the LAN Applications Γöé Γöé
Γöé that you want to run remotely. Γöé You Want to Run Remotely Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 3) Insert Diskette 1 in the Γöé Installing the LAN Distance Γöé Γöé
Γöé diskette drive and type Γöé Product Using Diskettes Γöé Γöé
Γöé "A:INSTALL" to start the LAN Dis- Γöé Γöé Γöé
Γöé tance installation program. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 4) Select a target drive. Γöé Installing the LAN Distance Γöé Γöé
Γöé Γöé Product Using Diskettes Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 5) Select Basic Settings from Γöé Installing the LAN Distance Γöé Γöé
Γöé the Basic Settings Selection Γöé Product Using Diskettes Γöé Γöé
Γöé window. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 6) Select a modem type. Γöé Specifying a Connection Type Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 7) Select a COM port. Γöé Selecting a Serial (COM) Port Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 8) Specify a telephone number Γöé Specifying a Telephone Number for Γöé Γöé
Γöé for the LAN Distance workstation Γöé Dial Out Γöé Γöé
Γöé you want to call. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 9) Select Token-Ring or Ethernet Γöé Specifying Your LAN Type Γöé Γöé
Γöé as your LAN type. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 10) Specify a LAN Distance Γöé Specifying a LAN Distance Logical Γöé Γöé
Γöé logical adapter network address Γöé Adapter Network Address Γöé Γöé
Γöé for your workstation. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 11) If you install the LAN Dis- Γöé Shuttling to a Remote or Γöé Γöé
Γöé tance Remote product on a Γöé LAN-Attached Configuration Γöé Γöé
Γöé LAN-attached workstation, select Γöé Γöé Γöé
Γöé LAN-attached or LAN Distance Γöé Γöé Γöé
Γöé Remote as your workstation type. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 12) Stop all applications, shut Γöé Γöé Γöé
Γöé down, then restart your work- Γöé Γöé Γöé
Γöé station. Γöé Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Checklist for Installation and Basic Settings Configuration Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TASK Γöé GO TO... Γöé DONE Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé (X) Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé OPTIONAL SETUP TASKS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1) Answer Basic Settings Γöé Configuring the LAN Distance Γöé Γöé
Γöé questions to set up an ISDN con- Γöé Product Using Basic Settings Γöé Γöé
Γöé nection for your LAN Distance Γöé Γöé Γöé
Γöé workstation. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 2) If you need LAN protocols in Γöé Configuring Additional LAN Proto- Γöé Γöé
Γöé addition to NetBIOS for your LAN Γöé cols Required for Your LAN Γöé Γöé
Γöé applications, configure these Γöé Applications Γöé Γöé
Γöé protocols through the LAN Dis- Γöé Γöé Γöé
Γöé tance Settings notebook. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 3) Specify a name for your work- Γöé Specifying A Name for Your Γöé Γöé
Γöé station to uniquely identify your Γöé Workstation Γöé Γöé
Γöé workstation icon. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 4) Using the Shuttle feature to Γöé Enabling Shuttle on Your LAN Dis- Γöé Γöé
Γöé switch your workstation's config- Γöé tance Remote Workstation Γöé Γöé
Γöé uration from LAN-attached to Γöé Γöé Γöé
Γöé remote and remote to Γöé Γöé Γöé
Γöé LAN-attached. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 5) To dial additional LAN Dis- Γöé Creating a Phone Book Entry Γöé Γöé
Γöé tance workstations, set up a Γöé Γöé Γöé
Γöé phone book entry for each work- Γöé Γöé Γöé
Γöé station you want to dial. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 6) If your LAN Distance work- Γöé Setting Up Your LAN Distance Γöé Γöé
Γöé station will be called back by a Γöé Remote to Answer Calls Γöé Γöé
Γöé LAN Distance Connection Server Γöé Γöé Γöé
Γöé prior to logon, set up your LAN Γöé Γöé Γöé
Γöé Distance Remote to answer calls. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 7) If you plan to receive calls Γöé Setting Up Your LAN Distance Γöé Γöé
Γöé from LAN Distance Connection Γöé Remote to Answer Calls Γöé Γöé
Γöé Servers or LAN Distance Remotes, Γöé Γöé Γöé
Γöé set up your LAN Distance Remote Γöé Γöé Γöé
Γöé to answer calls. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 8) To control access to the Γöé Enabling Security on Your Remote Γöé Γöé
Γöé resources on your LAN Distance Γöé Workstation Γöé proc=Γöépa.
Γöé Remote, enable security. Γöé Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 6. Quick Start for MS Windows Workstations ΓòÉΓòÉΓòÉ
This chapter summarizes the tasks required to set up your LAN Distance Remote.
Begin LAN Distance setup by reviewing the required tasks listed in Checklist
for Installation and Basic Settings Configuration.
ΓòÉΓòÉΓòÉ 6.1. Using the Installation and Basic Settings Configuration Checklist for MS Windows ΓòÉΓòÉΓòÉ
Checklist for Installation and Basic Settings Configuration divides setup tasks
into required and optional categories and cross-references tasks to topics in
this book.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Checklist for Installation and Basic Settings Configuration Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TASK Γöé GO TO... Γöé DONE Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé (X) Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé REQUIRED SETUP TASKS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1) Install prerequisite hardware Γöé Hardware and Software Γöé Γöé
Γöé and software. Γöé Requirements Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 2) If you plan to run applica- Γöé Setting Up a MS Windows Work- Γöé Γöé
Γöé tions that use the 802.2 LAN pro- Γöé station to Run 802.2 Applications Γöé Γöé
Γöé tocol, such as PC3270 for Γöé Γöé Γöé
Γöé Windows, install the LAN Support Γöé Γöé Γöé
Γöé Program (LSP). Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 3) Install the LAN applications Γöé Installing the LAN Applications Γöé Γöé
Γöé that you want to run remotely. Γöé You Want to Run Remotely Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 4) Insert Diskette 1 in the Γöé Installing the LAN Distance Γöé Γöé
Γöé diskette drive and type Γöé Product Using Diskettes Γöé Γöé
Γöé "A:INSTALL" from the Windows' Run Γöé Γöé Γöé
Γöé command line to start the LAN Γöé Γöé Γöé
Γöé Distance installation program. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 5) Select a target drive. Γöé Installing the LAN Distance Γöé Γöé
Γöé Γöé Product Using Diskettes Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 6) Select Basic Settings from Γöé Installing the LAN Distance Γöé Γöé
Γöé the Basic Settings Selection Γöé Product Using Diskettes Γöé Γöé
Γöé window. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 7) Select a modem type. Γöé Specifying a Connection Type Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 8) Select a COM port. Γöé Selecting a Serial (COM) Port Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 9) Specify a telephone number Γöé Specifying a Telephone Number for Γöé Γöé
Γöé for the LAN Distance workstation Γöé Dial Out Γöé Γöé
Γöé you want to call. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 10) Select Token-Ring or Γöé Specifying Your LAN Type Γöé Γöé
Γöé Ethernet as your LAN type. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 10) Specify a LAN Distance Γöé Specifying a LAN Distance Logical Γöé Γöé
Γöé logical adapter network address Γöé Adapter Network Address Γöé Γöé
Γöé for your workstation. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 11) If you need to access a Γöé Enabling NetWare Requester Γöé Γöé
Γöé NetWare Server over the LAN Dis- Γöé Support for MS Windows Γöé Γöé
Γöé tance connection and you Γöé Γöé Γöé
Γöé installed the required version of Γöé Γöé Γöé
Γöé the NetWare Requester product, Γöé Γöé Γöé
Γöé you can enable NetWare Requester Γöé Γöé Γöé
Γöé support during Basic Settings. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 12) If you install the LAN Dis- Γöé Shuttling to a Remote or Γöé Γöé
Γöé tance Remote product on a Γöé LAN-Attached Configuration Γöé Γöé
Γöé LAN-attached workstation, select Γöé Γöé Γöé
Γöé LAN-attached or LAN Distance Γöé Γöé Γöé
Γöé Remote as your workstation type. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 13) Stop all applications and Γöé Γöé Γöé
Γöé restart your workstation. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé OPTIONAL SETUP TASKS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 1) If you install the required Γöé Installing and Configuring Γöé Γöé
Γöé version of NetWare Requester Γöé NetWare Requester for MS Windows Γöé Γöé
Γöé after you complete Basic Set- Γöé Γöé Γöé
Γöé tings, enable NetWare Requester Γöé Γöé Γöé
Γöé through the Settings Notebook. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 2) Specify a name for your work- Γöé Specifying A Name for Your Γöé Γöé
Γöé station to uniquely identify your Γöé Workstation Γöé Γöé
Γöé workstation icon. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 3) Using the Shuttle feature to Γöé Using the Shuttle Feature for MS Γöé Γöé
Γöé switch your workstation's config- Γöé Windows Γöé Γöé
Γöé uration from LAN-attached to Γöé Γöé Γöé
Γöé remote and remote to Γöé Γöé Γöé
Γöé LAN-attached. Γöé Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Checklist for Installation and Basic Settings Configuration Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TASK Γöé GO TO... Γöé DONE Γöé
Γöé Γöé Γöé Γöé
Γöé Γöé Γöé (X) Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 4) To dial additional LAN Dis- Γöé Creating a Phone Book Entry Γöé Γöé
Γöé tance workstations, set up a Γöé Γöé Γöé
Γöé phone book entry for each work- Γöé Γöé Γöé
Γöé station you want to dial. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 5) If your LAN Distance work- Γöé Answer Mode Window for MS Windows Γöé Γöé
Γöé station will be called back by a Γöé Workstations Γöé Γöé
Γöé LAN Distance Connection Server, Γöé Γöé Γöé
Γöé customize answer criteria. Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé 6) If you plan to receive calls Γöé Answer Mode Window for MS Windows Γöé Γöé
Γöé from LAN Distance Connection Γöé Workstations Γöé Γöé
Γöé Servers or LAN Distance Remotes, Γöé Γöé Γöé
Γöé customize autoanswer criteria. Γöé Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 7. Installing the LAN Distance Remote Product ΓòÉΓòÉΓòÉ
This chapter describes preinstallation tasks, lists installation steps, and
explains how to reinstall, upgrade, and remove the LAN Distance Remote product.
ΓòÉΓòÉΓòÉ 7.1. Hardware and Software Requirements ΓòÉΓòÉΓòÉ
Before you install the LAN Distance Remote product, install prerequisite
software and the WAN hardware you want to configure for the LAN Distance Remote
product:
o IBM OS/2 2.0 or later, or Microsoft Windows version 3.1 running on DOS
version 5.0 or later
o The LAN Distance Remote product requires 5.0 Mb fixed-disk storage.
Additional space is required for the LAN Distance Remote product to install
First Failure Support Technology/2* (700 Kb) and required LAN transports (2.2
Mb) if these products are not already installed.
To run the LAN Distance product, OS/2, and one LAN application you need about
12.0 Mb fixed-disk storage. The requirements for your workstation may vary
depending on your LAN applications, data requirements, processor speed, and
response time requirements.
o The LAN Distance Remote for MS Windows product requires 2.3 Mb fixed-disk
storage.
o A modem and/or adapter for asynchronous, synchronous, or ISDN communications.
See Hardware Supported for the LAN Distance Remote Product for a list of
supported modems and adapters.
WAN adapters used by the LAN Distance Remote product cannot be used by other
applications simultaneously.
o Access to a switched or nonswitched (leased) telephone line to establish an
asynchronous, synchronous or ISDN connection.
o If you are using an adapter for asynchronous or ISDN communications, install
and configure the adapter with the adapter software using the manufacturer's
instructions.
o If you have IBM's Communication Manager installed on your workstation and you
plan to set up an ISDN connection, set up Communications Manager so it is not
configured for ISDN.
o To run your COM ports at a speed greater than 9600 bps, your workstation
should have FIFO buffering. However, some non-FIFO workstations with a
faster processor (25 MHz and above) and modem (14400 bps or better) can
support higher transmission speeds.
To verify that your workstation has FIFO buffering type: MODE COM1 at an OS/2
command prompt. If the response is BUFFER = N/A, then your workstation does
not have FIFO buffering. See "Avoiding Message WCL0233 When Restarting Your
Workstation" and "Performance Tuning for Non-FIFO Workstations" in the LAN
Distance Advanced Guide for information about using a non-FIFO workstation.
o If you install the LAN Distance product on a workstation with the IBM
Distributed Computing Environment (DCE) Multi-Protocol Transport Services -
AnyNet for OS/2 (MPTS) product, install the MPTS corrective service diskette
(CSD) before you start the LAN Distance product.
ΓòÉΓòÉΓòÉ 7.2. Configuring Your Wide Area Network Hardware ΓòÉΓòÉΓòÉ
Two options exist for configuring your WAN hardware to work with the LAN
Distance Remote product: Basic Settings and the LAN Distance Settings
notebook.
To select a setup option for the LAN Distance Remote product, answer the
following questions about your WAN hardware:
o Type of connection: asynchronous, synchronous, or ISDN?
o Number of ports: one or two?
o Type of telephone line: switched or nonswitched (leased)?
ΓòÉΓòÉΓòÉ 7.2.1. The Basic Settings Option ΓòÉΓòÉΓòÉ
Most LAN Distance Remotes will use this option to complete configuration. You
can select the Basic Settings option only during LAN Distance Remote
installation. The Basic Settings path supports the following hardware setups:
o One asynchronous COM port or one ISDN adapter
o One asynchronous modem
o Switched telephone lines
o One phone book entry for dialing out
Note: Select Basic Settings even if you will configure additional connections
or multiple phone book entries. Make your initial selections through Basic
Settings, then modify your setup in the the LAN Distance Settings notebook.
ΓòÉΓòÉΓòÉ 7.2.2. The Settings Notebook Option ΓòÉΓòÉΓòÉ
The LAN Distance Settings notebook can be used to modify your Basic Settings
setup at any time. You must use the LAN Distance Settings notebook to configure
the following types of WAN hardware:
o Synchronous modems and adapters
o ARTIC adapters for multiport connections
o Nonswitched (leased) connections.
Setup Requirements for Basic Settings and LAN Distance Settings Notebook
summarizes the setup requirements supported by Basic Settings and the LAN
Distance Settings notebook configuration options.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Setup Requirements for Basic Settings and Γöé
Γöé LAN Distance Settings Notebook Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé LAN DISTANCE SETUP REQUIREMENTS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé CON- Γöé PORTS Γöé TELE- Γöé PHONE Γöé
Γöé Γöé NECTION Γöé Γöé PHONE Γöé BOOK Γöé
Γöé Γöé TYPE Γöé Γöé LINE Γöé ENTRIES Γöé
Γöé Γöé Γöé Γöé TYPE Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé BASIC Γöé 1 Async Γöé 1 COM Γöé SwitchedΓöé 1 telephΓöéne
Γöé SETTINGS Γöé or Γöé Γöé Γöé number Γöé
Γöé SETUP OPTION Γöé 1 ISDN Γöé Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé LAN DISTANCE Γöé Async Γöé Mul- Γöé SwitchedΓöé MultipleΓöé
Γöé SETTINGS Γöé Sync Γöé tiple Γöé and Γöé telephonΓöé
Γöé NOTEBOOK Γöé ISDN Γöé ports Γöé NonswitcΓöéenumbers Γöé
Γöé SETUP OPTION Γöé ARTIC adΓöépter Γöé Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 7.3. Installing the LAN Applications You Want to Run Remotely ΓòÉΓòÉΓòÉ
It is important to install the LAN Distance Remote product after you install
the LAN applications that you want to run over the LAN Distance connection.
Although you can install LAN applications on top of the LAN Distance Remote
product, it is best to install the LAN Distance Remote product last because of
the changes made to your system configuration files.
ΓòÉΓòÉΓòÉ 7.3.1. OS/2 System Configuration Files ΓòÉΓòÉΓòÉ
The LAN Distance Remote product makes changes to OS/2 system configuration
files commonly used by other OS/2 applications, such as the PROTOCOL.INI and
CONFIG.SYS files. The changes made to these files during LAN Distance
installation and configuration are required to use the LAN Distance product.
ΓòÉΓòÉΓòÉ 7.3.2. LAN Networking Software for OS/2 ΓòÉΓòÉΓòÉ
The LAN Distance Remote product installs the version of LAN networking software
required by the LAN Distance Remote product. Installing other LAN applications,
such as LAN Server or LAN Requester, may replace the LAN Distance required
version of LAN networking software with an earlier version.
If this occurs, the LAN Distance Remote product will fail. To reinstall the
LAN Distance required version of LAN networking software, go to an OS/2 command
line and type CD IBMCOM from your OS/2 boot drive. Insert
Diskette 3, and type A:LAPS. When the LAPS Logo window is displayed, select the
Install push button.
ΓòÉΓòÉΓòÉ 7.3.3. Shuttling Considerations for OS/2 ΓòÉΓòÉΓòÉ
You can install the LAN Distance Remote product on a workstation set up as a
LAN workstation or on a stand-alone workstation. If you plan to shuttle
(switch) between remote and LAN-attached environments, install and configure
the LAN applications that you want to use in these environments before you
install the LAN Distance Remote product. For more information about the
Shuttle feature, see Using the Shuttle Feature for OS/2.
ΓòÉΓòÉΓòÉ 7.3.4. Setup Considerations for Some Popular LAN Applications ΓòÉΓòÉΓòÉ
If you plan to run IBM's Communications Manager, LAN Requester, LAN Server,
Novell's** NetWare** Requester, or Banyan's VINES** on your LAN Distance
Remote, see Setup Considerations for Some Popular LAN Applications.
ΓòÉΓòÉΓòÉ 7.3.5. Setup Considerations for a Dedicated Remote Workstation ΓòÉΓòÉΓòÉ
If you plan to install LAN applications on a workstation, then permanently
remove the workstation from the LAN, go to the Workstation tab in the Settings
notebook to make sure Shuttle between LAN-attached workstation and remote
workstation is not selected. Optionally, you can delete configuration
information setup for your LAN adapter through LAN Adapter and Protocol Support
(LAPS).
ΓòÉΓòÉΓòÉ 7.3.6. MS Windows System Configuration Files ΓòÉΓòÉΓòÉ
During installation and configuration, the LAN Distance product changes DOS
system configuration files commonly used by other MS Windows applications, such
as AUTOEXEC.BAT and CONFIG.SYS. The changes made to these files are required
to use the LAN Distance product. Also, a separate PROTOCOL.INI file is created
in the WAL directory. This file can be shared with other LAN applications or
protocols.
ΓòÉΓòÉΓòÉ 7.3.7. LAN Networking Software for MS Windows ΓòÉΓòÉΓòÉ
The LAN Distance Remote product for MS Windows installs NetBIOS and NetWare
Requester support (ODI2NDI) but does not install the IEEE 802.2 LAN protocol.
If you plan to run 802.2 LAN applications on your LAN Distance Remote, install
LSP before you install the LAN Distance Remote for MS Windows product. See
Setting Up a MS Windows Workstation to Run 802.2 Applications.
ΓòÉΓòÉΓòÉ 7.4. Selecting an Installation Method ΓòÉΓòÉΓòÉ
Use one of the following installation methods to install the LAN Distance
Remote product on your LAN Distance workstation:
o Supported by both the OS/2 and MS Windows products:
- Install the LAN Distance Remote product using the original diskettes.
This is an easy way to install the LAN Distance Remote product on your
workstation. The LAN Distance Remote install program features an
easy-to-use graphical interface and asks a minimum number of questions to
quickly guide you through installation.
o Supported by only the OS/2 product:
- Install the LAN Distance Remote product from a redirected drive (attended
installation).
- Install the LAN Distance Remote product from a redirected drive using a
response file (unattended installation).
If you install the LAN Distance Remote product using one of the redirected
installation methods, you need to be physically connected to a LAN. A LAN
Distance administrator needs to give you LAN access and instructions for
installing the LAN Distance Remote product via a redirected drive. See
"Installing from a Redirected Drive Using Diskette Images" and "Installing
from a Redirected Drive Using a Response File" in the LAN Distance Advanced
Guide.
ΓòÉΓòÉΓòÉ 7.5. Installing the LAN Distance Product Using Diskettes ΓòÉΓòÉΓòÉ
Follow these steps to install the LAN Distance Remote product on a LAN-attached
or stand-alone workstation using the original diskettes:
1. With Diskette 1 in the diskette drive, type A:INSTALL at an OS/2 command
prompt, or from a MS Windows RUN command, and press Enter to start the
install program.
2. When the IBM logo is displayed, select OK to start installation.
3. When the Welcome panel is displayed, select Quick Start for a list of
required installation steps and detailed information for installing and
configuring with Basic Settings.
4. In the succeeding windows, follow the instructions provided to complete LAN
Distance Remote installation.
Select Help from any window if you need help making selections or entering
values.
5. The Basic Settings Selection window, shown in Basic Settings Selection
Window, is displayed when the installation has successfully completed.
Basic Settings Selection Window
Select the Basic Settings push button to continue and configure your
workstation using Basic Settings. Go to Configuring the LAN Distance
Product Using Basic Settings.
Select the Exit push button to leave install. To configure your WAN
hardware, start the LAN Distance Remote product and open the Settings
notebook, or for a MS Windows workstation, select the Settings object in
the LAN Distance container. See "Setting Up Ports and Modems," in the LAN
Distance Advanced Guide.
Note: If you install the LAN Distance Remote product on a LAN-attached
workstation, the Shuttle message window shown in LAN Distance Shuttle
Message Window is displayed. Choose whether you want to function as a
LAN-attached or a LAN Distance Remote when you restart your workstation.
6. After you install the LAN Distance Remote product, read through the README
file. This file contains important information you need to use the product.
Insert LAN Distance Remote Diskette 1. Access your diskette drive from an
OS/2 command line, then type TYPE README | MORE, and press Enter to access
the README file. To print the README file from the diskette drive, type
PRINT README.
ΓòÉΓòÉΓòÉ 7.6. Interrupting the LAN Distance Installation Program ΓòÉΓòÉΓòÉ
Interrupting the LAN Distance installation program is not recommended. If you
must interrupt installation, wait until the Basic Settings Selection window
shown in Basic Settings Selection Window is displayed and select Exit, or
interrupt installation from any Basic Settings window. Either action allows you
to exit with the option to configure through the Settings notebook later, or to
remove the product (using LDREMOVE) and install again.
Note: Interrupting the install program anytime before selecting OK on the
Target Drive panel is ok. You can install again later.
ΓòÉΓòÉΓòÉ 7.7. Accessing Installation Error Log Files ΓòÉΓòÉΓòÉ
Installation error information is saved in two files located in the
\OS2\INSTALL directory:
WALINST.LOG Contains LAN Distance installation messages
LAPSHIST.LOG Contains LAPS installation messages
ΓòÉΓòÉΓòÉ 7.8. Reinstalling or Upgrading the LAN Distance Remote Product ΓòÉΓòÉΓòÉ
You can reinstall the LAN Distance Remote product or upgrade from a previous
release of the LAN Distance Remote product. When you reinstall or upgrade,
your existing LAN Distance files are replaced, except for the user
configuration files shown in LAN Distance User Configuration Files. The
information in these files is not changed. Reinstalling or upgrading the LAN
Distance Remote product requires an additional 2.4 Mb of disk space.
Note: You do not want to upgrade or reinstall the LAN Distance Remote product
in certain situations, for example, when your LAN Distance files have been
corrupted. For a list of these situations, see Removing the LAN Distance Remote
Product. In these cases, first use LDREMOVE to remove LAN Distance, then
perform an initial install and use Basic Settings to complete configuration.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé LAN Distance User Configuration Files Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé FILE NAME Γöé FILE DESCRIPTION Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WCLLOCAL.INI Γöé Settings notebook configuration information Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WCBUSRF.ISF Γöé User account database security information Γöé
Γöé Γöé Γöé
Γöé Γöé NOTE: for OS/2 only Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WCLDIAL.CXD Γöé Phone book entries Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WCLNET.INI Γöé Modem configuration information Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Complete these steps to reinstall or upgrade the LAN Distance Remote product:
1. Insert Diskette 1 in the diskette drive, type A:INSTALL from an OS/2
command line or a MS Windows RUN command, and press Enter.
2. When the reinstallation or upgrade window shown in Reinstallation and
Upgrade Windows is displayed, select OK.
Reinstallation and Upgrade Windows
3. When you see a message stating that reinstallation or upgrade is complete,
shut down and restart your workstation.
Note: Your previously defined configuration files are active and have not been
changed. Make any required changes to your LAN Distance configuration through
the Settings notebook.
ΓòÉΓòÉΓòÉ 7.9. Removing the LAN Distance Remote Product ΓòÉΓòÉΓòÉ
Run the LDREMOVE program to remove the LAN Distance Remote product if you want
to:
o Completely remove the LAN Distance Remote product from the workstation's hard
disk.
o Completely remove a partially deleted LAN Distance Remote product, which was
improperly deleted without using the LDREMOVE program. (For example,
incorrectly using the command del *.* in the WAL directory.)
o Perform an initial install of the LAN Distance Remote product and use Basic
Settings to complete configuration (after using a BETA release).
o Replace corrupted LAN Distance files and initially install the LAN Distance
Remote product and use Basic Settings to complete configuration.
o Prepare to change your LAN Distance Remote to a LAN Distance Connection
Server by installing the LAN Distance Connection Server product.
Follow these steps to remove the LAN Distance Remote product:
1. From an OS/2 command line, or a MS Windows Run command line, type:
LDREMOVE
If the LDREMOVE program is not found:
o For OS/2, insert LAN Distance Diskette 1 in the diskette drive, type:
a:LDREMOVE
If you do not have REXX installed, leave Diskette 1 in the diskette drive,
and type:
a:LDREM a:
where a: is the drive and path of LAN Distance Diskette 1.
o For MS Windows, insert LAN Distance Diskette 1 in the diskette drive, and
type:
expand a:LDREMOVE.EXE x:\LDREMOVE.EXE
where x:\ is the drive and path where the program will be copied. Then
from x:\, type:
LDREMOVE
2. From the Remove LAN Distance window, shown in Remove LAN Distance Window,
specify whether you want to archive a copy of LAN Distance configuration
files or delete LAN Distance configuration files.
Remove LAN Distance Window
o Select the Delete configuration files radio button to remove LAN Distance
configuration files.
o Select the Archive configuration files radio button to store a backup copy
of your LAN Distance configuration files.
The user configuration files listed in LAN Distance User Configuration
Files are stored in the WAL\BACKUP directory. The following files are
also stored in this directory when you choose to archive configuration
files:
PROTOCOL.WAL Contains the PROTOCOL.INI file that was active before
you typed LDREMOVE
CONFIG.WAL Contains the CONFIG.SYS file that was active before
you typed LDREMOVE
PROTOCOL.LPS Contains configuration information for the
LAN-attached environment used by the Shuttle feature
PROTOCOL.RWS Contains configuration information for the LAN
Distance Remote environment used by the Shuttle
feature
Note: These files are not automatically restored when you reinstall or
upgrade the LAN Distance Remote product. To restore user configuration
information in the WCLDIAL.CXD file and the WCBUSRF.ISF file, copy these
files into the WAL directory after you install the LAN Distance Remote
product and restart your workstation.
3. Select the Remove push button to start the removal process.
4. When you see the message that removal is complete, shut down and restart
your workstation.
ΓòÉΓòÉΓòÉ 7.10. Removing a LAN Distance COM Port for a MS Windows Workstation ΓòÉΓòÉΓòÉ
During Basic Settings you will configure a COM port for your MS Windows
workstation. See Selecting a Serial (COM) Port. The LAN Distance product for
MS Windows requires a dedicated COM port. To use this COM port with a
different product, find the following device driver statement in your
CONFIG.SYS file:
DEVICE=C:\WAL\WINAMAC.SYS
Type REM at the beginning of the line to comment out the statement:
REM DEVICE=C:\WAL\WINAMAC.SYS
Restart your workstation to activate this change.
ΓòÉΓòÉΓòÉ 8. Configuring the LAN Distance Product Using Basic Settings ΓòÉΓòÉΓòÉ
This chapter explains the selections you must make to configure your
workstation using the Basic Settings configuration option. To be sure that
Basic Settings is supported for your hardware setup, see Configuring Your Wide
Area Network Hardware.
ΓòÉΓòÉΓòÉ 8.1. Specifying a Connection Type ΓòÉΓòÉΓòÉ
You can configure a connection for an asynchronous modem or an ISDN adapter
through Basic Settings from the Connection type window shown in Connection Type
Window.
Connection Type Window
ΓòÉΓòÉΓòÉ 8.1.1. Configuring a Connection for an Asynchronous Modem ΓòÉΓòÉΓòÉ
The Basic Settings configuration option lets you configure a switched,
asynchronous connection. This type of connection uses a standard telephone
line to establish a LAN Distance connection.
An asynchronous modem can be an external box attached to your workstation's COM
port, or an internal modem located on an adapter card or on the workstation
system board.
To configure an asynchronous modem, select Asynchronous, then select your modem
from the Modem Type field. Select the OK push button to continue.
If your modem is not listed in the Modem Type field, either select a modem
similar to your unlisted modem, or select ** Any Modem Not In This List ** from
the Modem Type field. This modem type is set up as a Hayes Optima Modem.
If you cannot establish a connection using the modem you selected, there are
additional options for configuring your modem for the LAN Distance product.
See Using a Listed Modem Type to Configure Your Asynchronous Modem.
ΓòÉΓòÉΓòÉ 8.1.2. Configuring a Connection for an ISDN Adapter ΓòÉΓòÉΓòÉ
To set up an ISDN adapter, select the ISDN radio button.
This selection is available only if the IBM ISDN Interface Coprocessor/2
adapter card is already installed and the card is configured with the IBM ISDN
Coprocessor Support Program.
ΓòÉΓòÉΓòÉ 8.2. Selecting a Serial (COM) Port ΓòÉΓòÉΓòÉ
If you are installing an asynchronous modem, select the serial communications
(COM) port that your modem is connected from the COM ports listed in the Serial
Port field (Serial Port Window).
Serial Port Window
The LAN Distance Remote product uses serial device support for OS/2 to detect
which COM ports are available on your workstation. If serial device support is
not installed, a message is displayed before you select your COM port notifying
you that port availability is not guaranteed.
If you get an error message when you dial, use the OS/2 Selective Install
option to install serial device support on your workstation. Then go to the LAN
Distance Settings notebook to select an available port for your modem.
ΓòÉΓòÉΓòÉ 8.3. Specifying a Telephone Number for Dial Out ΓòÉΓòÉΓòÉ
A telephone number is required for ISDN and asynchronous connections. Type the
telephone number of the LAN Distance Connection Server or LAN Distance Remote
that you want to dial in the Phone number field shown in Phone Number Window.
Phone Number Window
ΓòÉΓòÉΓòÉ 8.3.1. Specifying a Phone Number for an ISDN Connection ΓòÉΓòÉΓòÉ
Type a 1-to-50 digit telephone number in the Phone number field. Formatting
characters, such as parentheses, slashes and dashes, that are used to separate
digits in telephone numbers are not accepted by the ISDN network.
ΓòÉΓòÉΓòÉ 8.3.2. Specifying a Phone Number for an Asynchronous Connection ΓòÉΓòÉΓòÉ
Type a 1-to-50 digit telephone number in the Phone number field. The number
you use may include any character and can contain dial modifiers supported by
your modem. See your modem manual for a list of supported dial modifiers.
ΓòÉΓòÉΓòÉ 8.4. Specifying Your LAN Type ΓòÉΓòÉΓòÉ
A LAN Distance Remote can access resources on a Token-Ring or Ethernet LAN by
dialing a LAN Distance Connection Server. Specify the type of LAN that your
LAN Distance Connection Server is connected to by selecting the IEEE 802.5
Token-Ring or the IEEE 802.3 Ethernet radio button shown in LAN Type Window.
Initially the type of LAN in the LAN Type window is defaulted to Token-Ring.
If you are using the LAN Distance Remote product in only the remote-to-remote
environment, accept the default setting.
LAN Type Window
ΓòÉΓòÉΓòÉ 8.5. Specifying a LAN Distance Logical Adapter Network Address ΓòÉΓòÉΓòÉ
The LAN Distance logical adapter network address for your workstation must be
unique. It is assigned to your LAN Distance Logical Adapter in the same way
that your Token-Ring or Ethernet address is assigned to your physical adapter
card.
This address can either be assigned by you or automatically generated, as
described in the following topics:
ΓòÉΓòÉΓòÉ 8.5.1. Using Your Token-Ring or Ethernet address as Your LAN Distance Logical Adapter ΓòÉΓòÉΓòÉ
If you have a Token-Ring or Ethernet adapter card installed on your
workstation, its address is initially displayed in the Logical Adapter Network
Address field.
Using this address as your LAN Distance logical adapter network address ensures
its uniqueness whether your workstation is set up as a LAN Distance Remote or a
LAN-attached workstation.
Logical Adapter Network Address Window
ΓòÉΓòÉΓòÉ 8.5.2. Assigning a Unique LAN Distance Logical Adapter Network Address ΓòÉΓòÉΓòÉ
If you do not have a Token-Ring or Ethernet adapter card installed on your
workstation, you can assign an address by selecting the Generate push button,
or by typing a LAN Distance logical adapter network address in the Logical
Adapter Network Address field.
The LAN Distance logical adapter network address is a 12-character hexadecimal
address in either Token-Ring or Ethernet format:
o The valid range for your Token-Ring logical adapter network address is:
000000000001 - 7FFFFFFFFFFF
o The valid range for your Ethernet address is:
000000000001 - FEFFFFFFFFFF
ΓòÉΓòÉΓòÉ 8.6. Enabling NetWare Requester Support for MS Windows ΓòÉΓòÉΓòÉ
You can enable NetWare Requester support during Basic Settings if you have one
of these supported versions of the Novell NetWare Client product installed:
o Novell NetWare Client for MS Windows v1.01
o Novell NetWare Client provided with NetWare Server v4.01
1. From the Basic Settings Enable NetWare window, select the Enable Netware
Requester Support radio button. Select OK to continue.
2. If the NetWare Requester product is installed in the default directory, the
fully-qualified path is displayed in the Drive and directory field.
If it is not installed in the default directory, the Drive and directory
field is blank. Type a fully-qualified drive and directory path in this
field. Select OK to continue.
3. From the NetWare Frame Type window, specify the LAN frame type used by the
NetWare Server. If you do not know the LAN frame type, see your LAN
administrator.
The default LAN frame type for Token-Ring networks is TOKEN-RING and the
default LAN frame type for Ethernet networks is ETHERNET_802.3.
ΓòÉΓòÉΓòÉ 8.7. Shuttling to a Remote or LAN-Attached Configuration ΓòÉΓòÉΓòÉ
If you install the LAN Distance Remote product on a LAN-attached workstation,
the message window shown in LAN Distance Shuttle Message Window is displayed
before you finish installing the LAN Distance Remote product.
Select No to continue operating as a LAN workstation at this time, or select
Yes to operate as a LAN Distance Remote when you restart your workstation. For
more information about the Shuttle feature, see Using the Shuttle Feature for
OS/2.
LAN Distance Shuttle Message Window
ΓòÉΓòÉΓòÉ 9. Using the LAN Distance Product for OS/2 ΓòÉΓòÉΓòÉ
This chapter tells you how to start the LAN Distance Remote product, describes
actions you can perform from the LAN Distance Workstations window, and tells
you how to work with LAN Distance windows.
ΓòÉΓòÉΓòÉ 9.1. Starting the LAN Distance Remote Product ΓòÉΓòÉΓòÉ
The LAN Distance Remote product icon is displayed on your desktop when you
install the product. After you shut down and restart your workstation, you can
double-click on the LAN Distance Remote icon to start the LAN Distance Remote
product and open the LAN Distance Workstations window, shown in LAN Distance
Workstations Window.
LAN Distance Workstations Window
To work with the object-oriented user interface for the LAN Distance Remote
product, you select an object and then select an action for the object. Objects
are represented by icons in containers and names in list boxes. Select an
action to be performed on an object by selecting from pop-up menus, pull-down
menus, and push buttons.
For example, the MyWorkstation icon in the LAN Distance Workstations window
represents your workstation. The actions you can select for your workstation
are represented by menu bar items in the LAN Distance Workstations window and
the pull-down menu shown in LAN Distance Remote Open as Cascaded Menu.
ΓòÉΓòÉΓòÉ 9.2. Selecting Options from the Open-As Pull-Down Menu ΓòÉΓòÉΓòÉ
The Open as pull-down menu displays a list of items you can select to perform
actions on LAN Distance workstation icons displayed in the LAN Distance
Workstations window.
To use the Open as pull-down menu, first select a LAN Distance workstation in
the LAN Distance Workstations window. Then select Selected and Open as to
display a list of menu items.
Selecting an item from the Open as pull-down menu, such as Settings or Call and
Port Management, opens a notebook or a window for the workstation that is
selected.
ΓòÉΓòÉΓòÉ 9.2.1. Selecting Actions for Your LAN Distance Remote Workstation ΓòÉΓòÉΓòÉ
The icon for your workstation is displayed in the LAN Distance Workstations
window, as shown in LAN Distance Remote Open as Cascaded Menu, after you start
the LAN Distance Remote product.
LAN Distance Remote Open as Cascaded Menu
You can select the following menu items from the Open as pull-down menu if
security is disabled on your LAN Distance Remote. The items displayed in the
Open as pull-down menu for your workstation may be different.
Phone Book
Select to access the LAN Distance phone book to dial out and establish a
connection with a LAN Distance workstation.
Call and Port Management
Select to view and manage call activity for ports. You can use this tool
to disconnect calls for ports and start and stop modem types.
Settings
Select to open the Settings notebook and complete configuration tasks,
including setting up phone book entries, ports and modem types, and
changing the name of your workstation.
Message Log
Select to access the FFST/2* message log to view LAN Distance error and
warning messages.
Error Log
Select to access the OS/2 error log facility and view the errors logged by
the LAN Distance Remote product. This selection is used only when your
designated support organization requires information for problem
determination.
Tracking Notebook
Select to access information and tools for problem determination,
including audit information. Other tracking tools available include
trace, dump and file retrieval facilities.
ΓòÉΓòÉΓòÉ 9.2.2. Selecting Actions for a Secure LAN Distance Connection Server ΓòÉΓòÉΓòÉ
When you establish a connection with a secure LAN Distance Connection Server or
a secure LAN Distance Remote, an icon representing the secure LAN Distance
workstation is also displayed in the LAN Distance Workstations window as shown
in LAN Distance Connection Server Open as Cascaded Menu.
LAN Distance Connection Server Open as Cascaded Menu
The following list describes the menu items you can select from the Open as
pull-down if you log on to a secure LAN Distance workstation.
Logged-on Users
Select to view the users logged on to the LAN Distance Connection Server.
Personal Account Information
Select to view your user ID and change your passphrase. This menu item is
available only if the workstation selected in the LAN Distance
Workstations window is secure.
ΓòÉΓòÉΓòÉ 9.3. Working with LAN Distance Notebooks ΓòÉΓòÉΓòÉ
Some of the windows you open for the LAN Distance Remote product are notebooks.
For example, the Settings notebook is where you complete required and optional
configuration tasks, including configuring Phone Book entries, setting up an
additional modem, and configuring additional LAN protocols.
To open the Settings notebook:
1. From the LAN Distance Workstations window, select Selected then Open as.
2. From the Open as pull-down menu, select Settings to open the Settings
notebook shown in LAN Distance Settings Notebook.
LAN Distance Settings Notebook
LAN Distance notebooks are divided into sections by tabs. Each tab section may
contain multiple pages. From some of these pages you may open other notebooks.
For example, the Modems and Dial tabs are contained in the Settings notebook.
To find information in the Settings notebook, select a tabbed section and
browse through the pages by clicking on the page-turn arrows on the bottom
right corner of the page.
ΓòÉΓòÉΓòÉ 9.4. Saving Changes Made through the Settings Notebook ΓòÉΓòÉΓòÉ
When you make any configuration change in the Settings notebook, such as adding
a phone book entry or changing your workstation name, this change is not saved
until you close the Settings notebook. You can work with your changes while
the Settings notebook is open.
When you close the Settings notebook from the Close Settings window, choose
whether to save or discard changes you made in the Settings notebook.
Although your changes are saved when you close the Settings notebook, some take
effect when you stop and restart the LAN Distance Remote product, and others
take effect when you shut down and restart your workstation.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé How to Make Settings Notebook Changes Effective Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAKE THIS ACTION... Γöé TABS Γöé FIELDS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Stop and restart the LAN Dis- Γöé Modems (1) Γöé All fields Γöé
Γöé tance product to make effec- Γöé Security Γöé All fields Γöé
Γöé tive changes to these tabs Γöé Workstation Γöé Name of this LAN Distance worΓöéstation
Γöé and fields Γöé Γöé Description of this LAN DistaΓöéce
Γöé Γöé Γöé workstation Γöé
Γöé Γöé Γöé Display LAN Distance messagesΓöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Shut down and restart your Γöé Modems (2) Γöé All fields Γöé
Γöé workstation to make effective Γöé Ports Γöé All fields Γöé
Γöé changes to these tabs and Γöé Bridge Γöé All fields Γöé
Γöé fields Γöé Address Γöé All fields Γöé
Γöé Γöé LAPS Γöé All fields Γöé
Γöé Γöé Timers Γöé All fields Γöé
Γöé Γöé Workstation Γöé Connect to a non-LAN DistanceΓöédestination
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Close and reopen windows to Γöé Phone Book Γöé All fields Γöé
Γöé make changes effective to Γöé Dial Γöé All fields Γöé
Γöé these tabs and fields Γöé Workstation Γöé Shuttle between LAN-attached Γöéorkstation
Γöé Γöé Γöé and remote Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 9.5. Specifying A Name for Your Workstation ΓòÉΓòÉΓòÉ
The workstation name identifies your LAN Distance Remote in the LAN Distance
Workstations window. To specify a name for your LAN Distance Remote:
1. Open the LAN Distance icon and select your local workstation from the LAN
Distance Workstations window.
2. Select Selected from the menu bar and select Open as from the pull-down
menu.
3. Select Settings and then select the Workstation tab.
Workstation Tab in the Settings Notebook
4. Type a name for your workstation in the Name of this LAN Distance
workstation field.
5. Close the Settings notebook to save your changes.
ΓòÉΓòÉΓòÉ 9.6. Stopping the LAN Distance Product ΓòÉΓòÉΓòÉ
Before stopping the LAN Distance Remote product, stop applications, hang up
your LAN Distance connections, and close any open notebooks. If you stop the
LAN Distance Remote product without closing your open notebooks, any changes
you make are not saved.
To stop the LAN Distance Remote product, close the LAN Distance Workstations
window by double-clicking on the system menu symbol in the upper left corner of
the window. You can also select the system menu symbol to display the
pull-down menu, shown in System Menu Symbol Pull-Down Menu, then select Close
to stop the LAN Distance Remote product.
System Menu Symbol Pull-Down Menu
ΓòÉΓòÉΓòÉ 9.7. Enabling Security on Your Remote Workstation ΓòÉΓòÉΓòÉ
Security is disabled on your LAN Distance Remote when you install the LAN
Distance product. Enable security on your LAN Distance Remote only if you must
control access to resources on your workstation.
If you enable security on your workstation, you will be prompted to log on
before opening your workstation icon. You will also need to define a user ID
for each LAN Distance user that dials in to access resources on your LAN
Distance Remote. See "Setting Up Required Features for a User Account," in the
LAN Distance Advanced Guide.
Complete these steps to enable security on your LAN Distance Remote:
1. From the LAN Distance Workstations window, select the icon representing
your workstation.
2. Open the Settings notebook for your workstation and select the Workstation
tab.
Verify that the Connect to a non-LAN Distance destination field is not
checked.
3. Select the Security tab shown in Security Tab in the Settings Notebook.
4. To enable security, select the Enable radio button.
Security Tab in the Settings Notebook
5. Close the Settings notebook and stop the LAN Distance Remote product.
After you restart the LAN Distance Remote product and double-click on your
workstation icon, the LAN Distance Logon window shown in LAN Distance Logon
Window is displayed.
LAN Distance Logon Window
6. In the User ID field, type SECADMIN in uppercase letters. In the
Passphrase field, type SECADMIN in uppercase letters.
Change Passphrase Window
7. When the Change Passphrase window (shown in Change Passphrase Window) is
displayed, type a passphrase in the New Passphrase field. Then type the
same passphrase in the Verify Passphrase field. The passphrase you use:
o Is case-sensitive
o Can contain up to 32 characters of any type, including spaces
o Should be different from any other passwords used for applications you
access
o Must be a minimum of 8 characters, which is the default minimum passphrase
length
Warning: If you forget your passphrase, you must remove the LAN Distance
product, select the option Delete configuration files, and install the
product again to specify a new passphrase.
ΓòÉΓòÉΓòÉ 10. Using the LAN Distance Product with MS Windows ΓòÉΓòÉΓòÉ
This chapter tells you how to start the LAN Distance Remote product, describes
actions you can perform from the LAN Distance Workstations window, and tells
you how to work with LAN Distance windows.
ΓòÉΓòÉΓòÉ 10.1. Starting the LAN Distance Remote Product ΓòÉΓòÉΓòÉ
The LAN Distance Remote product icon is displayed in the LAN Distance group
when you install the product. After you exit and restart your workstation,
open the LAN Distance group. Double-click on the LAN Distance icon to start the
LAN Distance Remote product and open the LAN Distance Workstations window,
shown in LAN Distance Workstations Window and LAN Distance Group.
LAN Distance Workstations Window and LAN Distance Group
To work with the object-oriented user interface for the LAN Distance Remote
product, you select an object and then select an action for the object. Objects
are represented by icons in containers and names in list boxes. Select an
action to be performed on an object by selecting from pop-up menus, pull-down
menus, and push buttons.
For example, the MyWorkstation icon in the LAN Distance Workstations window
represents your workstation. The actions you can select for your workstation
are represented by menu bar items in the LAN Distance Workstations window and
the pull-down menu.
ΓòÉΓòÉΓòÉ 10.2. Selecting Actions from the Open As Pull-Down Menu ΓòÉΓòÉΓòÉ
The Open as pull-down menu displays a list of items you can select to perform
actions on LAN Distance workstation icons displayed in the LAN Distance
Workstations window.
To use the Open as pull-down menu, first select the LAN Distance workstation in
the LAN Distance Workstations window, shown in LAN Distance Workstations Window
and LAN Distance Group. Then select Selected and Open as to display a list of
menu items.
Selecting an item from the Open as pull-down menu, such as Settings or
Tracking, opens a notebook or a window for the selected workstation.
ΓòÉΓòÉΓòÉ 10.2.1. Selecting Actions for Your LAN Distance Remote Workstation ΓòÉΓòÉΓòÉ
You can select the following menu items from the Open as pull-down menu:
Phone Book
Select to access the LAN Distance phone book to dial out and establish a
connection with a LAN Distance workstation.
Settings
Select to open the Settings notebook and complete configuration tasks,
including setting up phone book entries, ports and modem types, and
changing the name of your workstation.
Tracking
Select to access information and tools for problem determination,
including trace information.
ΓòÉΓòÉΓòÉ 10.2.2. Selecting Actions for a Secure LAN Distance Connection Server ΓòÉΓòÉΓòÉ
When you establish a connection with a secure LAN Distance Connection Server or
a secure LAN Distance Remote, an icon representing the secure LAN Distance
workstation is also displayed in the LAN Distance Workstations window.
If you log on to a secure LAN Distance workstation, you can select Personal
account information from the Open as pull-down to view your user ID and change
your passphrase.
ΓòÉΓòÉΓòÉ 10.3. Working with LAN Distance Notebooks ΓòÉΓòÉΓòÉ
Some of the windows you open for the LAN Distance Remote product are notebooks.
For example, the Settings notebook is where you complete required and optional
configuration tasks, including configuring Phone Book entries, setting up an
additional modem, and configuring additional LAN protocols.
To open the Settings notebook:
1. From the LAN Distance Workstations window, select Selected then Open as.
2. From the Open as pull-down menu, select Settings to open the Settings
notebook shown in LAN Distance Settings Notebook.
LAN Distance Settings Notebook
LAN Distance notebooks are divided into sections by tabs. Each tab section may
contain multiple pages. From some of these pages you may open other notebooks.
For example, the Modems and Dial tabs are contained in the Settings notebook.
To find information in the Settings notebook, select a tabbed section and
browse through the pages by clicking on the page-turn arrows on the bottom
right corner of the page.
ΓòÉΓòÉΓòÉ 10.4. Saving Changes Made through the Settings Notebook ΓòÉΓòÉΓòÉ
When you make any configuration change in the Settings notebook, such as adding
a phone book entry or changing your workstation name, this change is not saved
until you close the Settings notebook. You can work with your changes while
the Settings notebook is open.
To close any notebook, double-click on the system menu symbol located in the
upper-left corner of the notebook window.
When you close the Settings notebook, the Close Settings window is displayed.
Choose whether to save or discard changes you made in the Settings notebook.
Although your changes are saved when you close the Settings notebook, some take
effect when you stop and restart the LAN Distance Remote product, and others
take effect when you shut down and restart your workstation. This information
is detailed in How to Make Settings Notebook Changes Effective.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé How to Make Settings Notebook Changes Effective Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé TAKE THIS ACTION... Γöé TABS Γöé FIELDS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Stop and restart the LAN Dis- Γöé Modems (1) Γöé All fields Γöé
Γöé tance product to make effec- Γöé Workstation Γöé Name of this LAN Distance worΓöéstation
Γöé tive changes to these tabs Γöé Γöé Description of this LAN DistaΓöéce
Γöé and fields Γöé Γöé workstation Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Exit and restart your work- Γöé Modems (2) Γöé All fields Γöé
Γöé station to make effective Γöé Ports Γöé All fields Γöé
Γöé changes to these tabs and Γöé Address Γöé All fields Γöé
Γöé fields Γöé Timers Γöé All fields Γöé
Γöé Γöé Workstation Γöé Connect to a non-LAN DistanceΓöédestination
Γöé Γöé Netware Γöé All fields Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Close and reopen windows to Γöé Phone Book Γöé All fields Γöé
Γöé make changes effective to Γöé Dial Γöé All fields Γöé
Γöé these tabs and fields Γöé Workstation Γöé Shuttle between LAN-attached Γöéorkstation
Γöé Γöé Γöé and remote Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 10.5. Specifying a Name for Your Workstation ΓòÉΓòÉΓòÉ
The workstation name identifies your LAN Distance Remote in the LAN Distance
Workstations window. To specify a name for your LAN Distance Remote:
1. Open the LAN Distance icon and select your local workstation from the LAN
Distance Workstations window.
2. Select Selected from the menu bar and select Open as from the pull-down
menu.
3. Select Settings and then select the Workstation tab.
Workstation Tab in the Settings Notebook
4. Type a name for your workstation in the Local LAN Distance workstation name
field.
5. Close the Settings notebook to save your changes.
ΓòÉΓòÉΓòÉ 10.6. Stopping the LAN Distance Product ΓòÉΓòÉΓòÉ
Before stopping the LAN Distance Remote product, stop all LAN applications,
hang up your LAN Distance connections, and close any open LAN Distance
notebooks. If you stop the LAN Distance Remote product without closing your
open LAN Distance notebooks, any changes you make are not saved.
To stop the LAN Distance Remote product, close the LAN Distance Workstations
window by double-clicking on the system menu symbol in the upper left corner of
the window, or you can click once on the system menu symbol to display the
pull-down menu and select Close to stop the LAN Distance Remote product.
ΓòÉΓòÉΓòÉ 10.7. Changing Your Passphrase on the Connection Server ΓòÉΓòÉΓòÉ
Security can be enabled on a LAN Distance Connection Server. Security prevents
unauthorized users from logging on and accessing LAN resources. If you are
dialing into a secure LAN Distance Connection Server, your LAN Distance
security administrator must give you a user ID and passphrase. Your security
administrator establishes the intervals your passphrase will expire. You can
change the passphrase to meet security requirements or to make the passphrase
easier to remember. Periodically change your passphrase to maintain a high
level of security.
Complete these steps to change your LAN Distance passphrase:
1. From the menu bar on the LAN Distance Workstations window, select Selected,
Open as, then Phone Book to open the phone book shown in LAN Distance Phone
Book. (Double-clicking on the icon for your workstation takes you directly
to the phone book.)
LAN Distance Phone Book
2. Select the phone book entry for the LAN Distance workstation you want to
dial from the phone book entries in the list box to the left of the phone
book. Use the arrow keys in the bottom right corner of the phone book to
browse through the pages in the phone book.
If no phone book entries exist, refer to Setting Up Phone Book Entries in
the LAN Distance Phone Book.
3. Select Dial to initiate a connection.
When you dial out to establish a connection, telephone numbers in the phone
book entry's dial order list are dialed until a connection is established
or a dial retry limit is reached.
4. While a connection is being established, connection status is displayed in
the Status field of the phone book.
When the LAN Distance Logon window is displayed, type your user id in the
User ID field and your passphrase in the Passphrase field.
When Connected is displayed in the Status field, you can issue commands to
start a LAN application.
5. From the LAN Distance Workstations window, select the icon representing the
LAN Distance Connection Server, then select Selected.
6. In the Selected pull-down menu, select Personal account information.
The Personal Account Information notebook is displayed.
7. Select the Passphrase tab, shown in Passphrase Tab in the Personal Account
Information Notebook.
Passphrase Tab in the Personal Account Information Notebook
8. Type your current passphrase in the Current passphrase field. Then type a
new passphrase in the New passphrase field. The passphrase you use:
o Is case-sensitive
o Can contain up to 32 characters of any type, including spaces
o Should be different from any other passwords used for applications you
access
o Must contain at least the minimum number of characters defined in the
passphrase length at the dialed LAN Distance Connection Server
Type the new passphrase again in the New passphrase for verification field.
Warning: If you forget your passphrase, contact your LAN Distance administrator.
ΓòÉΓòÉΓòÉ 11. Setting Up LAN Distance to Run LAN Applications ΓòÉΓòÉΓòÉ
This chapter explains how to configure additional LAN protocols, describes
options for starting your LAN applications, tells you how to change your LAN
Distance logical adapter network address, and provides guidelines for adjusting
NetBIOS timers.
Note: No additional protocols need to be configured if your LAN applications
use NetBIOS. NetBIOS is installed and configured when you install the LAN
Distance Remote product.
ΓòÉΓòÉΓòÉ 11.1. Understanding the Protocol Support Provided by the LAN Distance Product ΓòÉΓòÉΓòÉ
LAN applications use many different protocols including NetBIOS in the OS/2 LAN
Server environment, IPX/SPX in the NetWare environment, and NetBIOS for
Microsoft's LAN Manager**.
Applications using NDIS-compliant protocols can operate unmodified over a LAN
Distance connection. The Network Driver Interface Specification (NDIS)
provides a network driver architecture that allows your workstation to run LAN
applications and protocols independent of the type of LAN hardware you have.
The LAN Distance Remote product provides support for several NDIS-compliant
protocols through the LAPS interface. LAN Distance Supported LAN Protocols and
LAN Applications lists the protocols currently supported through LAPS and lists
some common applications that use these protocols.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé LAN Distance Supported LAN Protocols and LAN Applications Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé SUPPORTED PROTO- Γöé EXAMPLES OF LAN APPLICATIONS Γöé
Γöé COLS Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM NETBIOS Γöé OS/2 LAN Server Γöé Microsoft LAN Manager (NetBΓöéUI)
Γöé Γöé OS/2 LAN Requester Γöé DATABASE/2 for OS/2* Γöé
Γöé Γöé Person to Person/2* Γöé Lotus Notes** Γöé
Γöé Γöé LAN Peer Services Γöé Time and Place/2* Γöé
Γöé Γöé cc:Mail** Γöé DOS LAN Requester Γöé
Γöé Γöé LANtastic** Γöé System Performance Monitor/Γöé
Γöé Γöé OS/2 Extended Γöé Γöé
Γöé Γöé Services* (Database Manager)Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM IEEE 802.2 Γöé OS/2 Extended Services Γöé IBM System Network ArchitecΓöéure
Γöé Γöé (Communication Manager) Γöé for OS/2 Γöé
Γöé Γöé Communications Manager/2 Γöé Personal Communications/327Γöé
Γöé Γöé AS/400* PC Support Γöé Personal Communications/525Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM TCP/IP Γöé TCP/IP for OS/2 Γöé LAN NetView* for OS/2 Γöé
Γöé Γöé TCP/IP for DOS Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM NETWARE Γöé Novell NetWare Server Γöé Novell NetWare Requester Γöé
Γöé REQUESTER SUPPORT Γöé Γöé Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 11.2. Configuring Additional LAN Protocols Required for Your LAN Applications ΓòÉΓòÉΓòÉ
NetBIOS is installed and configured when the LAN Distance product is installed.
IEEE 802.2 is also installed, but not configured. If any additional
NDIS-compliant LAN protocols are required to run your LAN applications,
separately install these protocols.
Follow these steps to configure the additional protocols you need through LAPS:
1. Open the Settings notebook and select the LAPS tab, then select the LAPS
push button to open the LAPS Configure Workstation window.
LAPS Configure Workstation Window
2. From the Current Configuration list box, select the LAN Distance Logical
Adapter.
3. From the Protocols list box, select the LAN protocol used by your LAN
application(s).
4. Select Add from the Protocols list box to add the protocol you selected to
the protocols currently configured for the LAN Distance Logical Adapter.
5. Repeat steps 3 and 4 for each additional protocol you need to configure for
the LAN Distance Logical Adapter.
6. Select OK to exit the Configure Workstation window and return to the LAPS
tab in the Settings notebook.
7. From the LAPS tab, double-click on the system menu symbol in the upper left
corner to close the Settings notebook and save protocol changes.
8. Shut down and restart your workstation.
ΓòÉΓòÉΓòÉ 11.3. Starting LAN Applications from Your LAN Distance Remote Workstation ΓòÉΓòÉΓòÉ
After you dial out using the LAN Distance phone book, establish a connection,
and log on to a secure LAN Distance workstation, you are ready to start a LAN
application.
You can use any of the following techniques to start your LAN applications:
ΓòÉΓòÉΓòÉ 11.3.1. Using Startup Commands to Start Your LAN Applications ΓòÉΓòÉΓòÉ
Issue startup commands for your application at a command line. For example, if
you are running LAN Requester on your LAN Distance Remote and you want to
access a LAN Server, log on to the LAN Server, and issue the appropriate NET
commands at an OS/2 command prompt.
ΓòÉΓòÉΓòÉ 11.3.2. Setting Up Phone Book Entries or Answer Modes to Autostart Your LAN Applications ΓòÉΓòÉΓòÉ
Set up a phone book entry to start a LAN application after you dial out, or set
up an answer mode to start an application when your LAN Distance Remote answers
a call. See Automatically Starting a LAN Application When You Dial and
Automatically Starting an Answer Mode When LAN Distance Is Started.
You can set up your LAN Distance Remote to automatically start a command file
in the same way you automatically start a LAN application.
ΓòÉΓòÉΓòÉ 11.3.3. Creating an OS/2 Command File to Autostart Your LAN Applications ΓòÉΓòÉΓòÉ
Create a command file to start a LAN application using LAN Distance commands
and your application's startup commands.
See LAN Distance commands and example command files in Using LAN Distance
Commands for OS/2 Workstations.
ΓòÉΓòÉΓòÉ 11.4. Changing Your LAN Distance Logical Adapter Network Address ΓòÉΓòÉΓòÉ
Complete these steps to change or verify your LAN Distance logical adapter
network address:
1. Open the Settings notebook and select the Address tab.
From page 1 of 2, you can change or verify your LAN Distance logical
adapter network address.
Page 1 of 2 of the Address Notebook
Note: Most LAN Distance Remotes use only one or two protocols and require
only one LAN Distance logical adapter network address. If you require more
than five LAN protocols to run your LAN applications, configure an
additional LAN Distance logical adapter network address on page 2 of 2.
2. Type a 12-character hexadecimal address in the LAN Distance logical adapter
network address field to change this address.
3. Close the Settings notebook to save your changes.
ΓòÉΓòÉΓòÉ 11.5. Adjusting NetBIOS Timers on the LAN Distance Remote ΓòÉΓòÉΓòÉ
WAN connections do not support data transmission speeds as fast as those
supported over LAN connections. To accommodate slower speeds on the WAN
connection, the NetBIOS LAN timers are automatically increased when the LAN
Distance product is installed.
The LAN Distance default settings for these timers are set to accommodate line
speeds as slow as 9600 bps, and to minimize connection problems and unnecessary
retransmission of data frames on the LAN Distance connection.
If you experience connection problems, you may need to increase NetBIOS timers.
Open the Settings notebook and select the Timers tab. Use the information in
Guidelines for Changing NetBIOS Timers as a guide for changing NetBIOS timers.
rule=horiz frame=box split=yes.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Guidelines for Changing NetBIOS Timers Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NETBIOS TIMERS Γöé DESCRIPTION OF NETBIOS TIMERS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé INACTIVITY TIMER Γöé THE VALUE FOR THIS TIMER DETERMINES HOW OFTEN NETBIOS Γöé
Γöé - TI Γöé CHECKS AN INACTIVE LINK TO VERIFY THAT THE LINK IS STILL Γöé
Γöé Γöé OPERATIONAL Γöé
Γöé Γöé Γöé
Γöé Γöé The NetBIOS default value for this timer is 30,000 Γöé
Γöé Γöé milliseconds. The LAN Distance product increases its Γöé
Γöé Γöé value to 60,000 milliseconds. Γöé
Γöé Γöé Γöé
Γöé Γöé Increase the setting for this timer if your line speed Γöé
Γöé Γöé is slower than 9600 bps. Γöé
Γöé Γöé Γöé
Γöé Γöé The value for this timer should be set to maintain the Γöé
Γöé Γöé following relationship to the other NetBIOS timers: Γöé
Γöé Γöé Γöé
Γöé Γöé Acknowledgment timer <= Response timer <= InactivΓöéty timer
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé RESPONSE TIMER - Γöé THE VALUE FOR THIS TIMER SPECIFIES THE DELAY THAT SHOULD Γöé
Γöé T1 Γöé OCCUR BEFORE RETRANSMITTING AN UNACKNOWLEDGED FRAME Γöé
Γöé Γöé Γöé
Γöé Γöé The NetBIOS default value for this timer is 500 milli- Γöé
Γöé Γöé seconds. The LAN Distance product increases its value Γöé
Γöé Γöé to 10,000 milliseconds. Γöé
Γöé Γöé Γöé
Γöé Γöé Increase the setting for this timer if your line speed Γöé
Γöé Γöé is slower than 9600 bps. Γöé
Γöé Γöé Γöé
Γöé Γöé As a rule, the response timer (T1) should be 2-5 times Γöé
Γöé Γöé larger than the acknowledgement timer (T2). Γöé
Γöé Γöé Γöé
Γöé Γöé The value for this timer should be set to maintain the Γöé
Γöé Γöé following relationship to the other NetBIOS timers: Γöé
Γöé Γöé Γöé
Γöé Γöé Acknowledgment timer <= Response timer <= InactivΓöéty timer
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ACKNOWLEDGEMENT Γöé THE VALUE FOR THIS TIMER SPECIFIES THE DELAY THAT SHOULD Γöé
Γöé TIMER - T2 Γöé OCCUR BEFORE ACKNOWLEDGING A RECEIVED FRAME WHEN THE Γöé
Γöé Γöé NUMBER OF MAXIMUM FRAMES SENT IS LESS THAN THE CONFIG- Γöé
Γöé Γöé URED MAXIMUM Γöé
Γöé Γöé Γöé
Γöé Γöé The NetBIOS default value for this timer is 200 milli- Γöé
Γöé Γöé seconds. The LAN Distance product increases its setting Γöé
Γöé Γöé to 2,000 milliseconds. Γöé
Γöé Γöé Γöé
Γöé Γöé Increase the setting for this timer if your line speed Γöé
Γöé Γöé is slower than 9600 bps. Γöé
Γöé Γöé Γöé
Γöé Γöé The value for this timer should be set to maintain the Γöé
Γöé Γöé following relationship to the other NetBIOS timers: Γöé
Γöé Γöé Γöé
Γöé Γöé Acknowledgment timer <= Response timer <= InactivΓöéty timer
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓòÉΓòÉΓòÉ 11.6. Special Considerations for Running Your 802.2 Applications ΓòÉΓòÉΓòÉ
If you experience problems running 802.2 applications, such as IBM
Communication Manager, you may need to increase 802.2 timers through LAPS.
1. Open the Settings notebook and select the LAPS tab, then select the LAPS
push button to open the LAPS Configure Workstation window shown in LAPS
Configure Workstation Window.
2. From the Current Configuration list box, select the IBM IEEE 802.2
protocol.
3. Select the Edit push button to increase the Group 1 response timer - T1 and
the Group 2 response timer - T2 for the IBM IEEE 802.2 protocol.
4. Select OK to exit the Configure Workstation window and return to the LAPS
tab in the Settings notebook.
5. From the LAPS tab, double-click on the system menu symbol in the upper left
corner to close the Settings notebook and save changes.
6. Shut down and restart your workstation.
ΓòÉΓòÉΓòÉ 11.7. Setting Up a MS Windows Workstation to Run 802.2 Applications ΓòÉΓòÉΓòÉ
LAN Support Program (LSP) version 1.30 and later provides NDIS 802.2 support.
ΓòÉΓòÉΓòÉ 11.7.1. Two Methods of LSP Installation ΓòÉΓòÉΓòÉ
The easiest method involves installing LSP before the LAN Distance Remote
product.
The second method of LSP installation assumes the LAN Distance Remote product
is installed first. Use the second method (described in Special Considerations
for Installing LAN Support Program) in the following cases:
o Your workstation does not have a LAN adapter AND you have no adapter option
diskette available.
Note: Some versions of LSP may include an adapter option on the LSP diskette
in the A:\DOS directory.
o You choose not to remove the LAN Distance Remote product before installing
LSP.
o You installed LSP without NDIS 802.2 support.
If you want to use the LSP installation method described here, but the LAN
Distance Remote product is already installed, you must first use the LDREMOVE
command to remove the LAN Distance Remote product from your workstation.
ΓòÉΓòÉΓòÉ 11.7.2. Installing the LAN Support Program ΓòÉΓòÉΓòÉ
Follow these steps (based on LSP version 1.33) to install LSP before you
install the LAN Distance Remote product:
1. Insert the LSP diskette in the diskette drive, type A:DXMAID, and press
Enter to start the LSP installation program.
2. Press Enter to get past the IBM logo screen and Information panels to the
Environment Information panel.
3. From the Environment Information panel, specify the following options for
your workstation:
Configuration for this computer? Yes
Use existing configuration information? Yes
Do you have adapter option diskettes? Yes
Are you configuring for 2 adapters? No
Do you need 802.2 interface support? Yes
Press Enter.
4. When the Process Adapter Option Diskette panel is displayed, insert the
adapter option diskette in the diskette drive, specify the path that
contains the DOS NDIS files (for example, A:\DOS) and press Enter.
An Information panel is displayed when the software driver configuration is
complete.
5. Remove the adapter option diskette from the diskette drive, insert the LSP
diskette, and press Enter to continue LSP installation.
6. From the Selections for Adapter Window, select the appropriate adapter for
your workstation so it is displayed in the Primary Adapter Window.
If your workstation does not have a LAN adapter, select:
IBM Token-Ring Network Adapters with NDIS support (IBMTOK.DOS).
Note: If you do not have a LAN adapter, record your adapter selection to
use when you edit the CONFIG.SYS file.
7. Press the Tab key to get to the Selections for Protocol Window.
8. From the Selections for Protocol Window, select:
IBM DOS IEEE 802.2 Protocol for NDIS (DXME0MOD.SYS)
This selection is displayed in the Protocol Window.
9. From the Selections for Protocol Window, select:
IBM DOS NETBIOS (DXMT0MOD.SYS)
This selection is displayed in the Protocol Window.
10. If you have a LAN adapter and want to ensure that your LAN applications
(such as PC3270 for Windows** or AttachMate**) are running correctly before
installing the LAN Distance product, press PF5. From the IBM DOS NETBIOS
(DXMT0MOD.SYS) panel, change the Extra SAPs field to 5 and the Extra
stations to 5. Press PF4 to save your changes.
11. Press PF4 to begin LSP installation and follow instructions displayed on
the screen.
12. If you do not have a LAN adapter on your workstation, change the CONFIG.SYS
file to avoid an error message when you restart you workstation.
Use an ASCII text editor to edit the CONFIG.SYS file, and remove the
appropriate device driver statement according to the adapter you selected
in the Selections for Adapter Window.
For example, if you selected:
IBM Token-Ring Network Adapters with NDIS support (IBMTOK.DOS)
delete the following line in the CONFIG.SYS file:
DEVICE=\LSP\IBMTOK.DOS
ΓòÉΓòÉΓòÉ 12. Setting Up Phone Book Entries in the LAN Distance Phone Book ΓòÉΓòÉΓòÉ
This chapter describes setting up phone book entries for LAN Distance
workstations you dial, and tells you how to customize your dial setup to
automatically start a LAN application when a connection is established.
ΓòÉΓòÉΓòÉ 12.1. Creating a Phone Book Entry ΓòÉΓòÉΓòÉ
When you complete Basic Settings configuration, the phone book for your LAN
Distance Remote contains one phone book entry. Set up a phone book entry for
each LAN Distance workstation you want to dial. A phone book entry contains
information required to establish a connection with another LAN Distance
workstation, including telephone numbers, modem type and telephone line type.
Complete these required steps for additional phone book entries:
1. From the Settings notebook, select the Phone Book tab, shown in Phone Book
Tab in the Settings Notebook. Select Add to create a new phone book entry.
Phone Book Tab in the Settings Notebook
2. From the Network type field in the window, select PSTN and select Switched,
or for MS Windows just select Switched, in the Line type field. Select OK
to continue.
The modem type and telephone line type on your workstation and the
workstation you dial must match to establish a connection.
3. From the Entry tab (Entry Tab in the Settings Phone Book for OS/2, or Entry
Tab in the Settings Phone Book for MS Windows for MS Windows) specify a
unique name for this phone book entry in the Entry name field.
This name identifies the phone book entry in the phone book.
Entry Tab in the Settings Phone Book for OS/2
Entry Tab in the Settings Phone Book for MS Windows
4. From the Numbers tab, select Add to specify a telephone number for the
phone book entry.
To add calling card information to the phone book entry, you may need to
add special wait characters for your modem. For more information, see
Customizing a Phone Book Entry for Calling Card Use.
5. From the Telephone number to be dialed field shown in Phone Book Entry Dial
Order List Box, type a telephone number for the LAN Distance workstation
you want to call.
To position the telephone number in the dial order list, select a number
from the Dialing order list. Select OK to add this information to the dial
order list.
The phone book entry contains a dialing order list of one or more telephone
numbers. Repeat steps 3 - 5 for each telephone number that you want to add
to the dial order list.
Phone Book Entry Dial Order List Box
6. For OS/2 only, from the Modems tab, select the Asynchronous radio button.
The default setting for this field matches the modem type configured for
your LAN Distance Remote.
7. Close the Phone Book Entry notebook to save your changes and return to the
Phone Book tab in the Settings notebook.
ΓòÉΓòÉΓòÉ 12.2. Automatically Starting a LAN Application When You Dial ΓòÉΓòÉΓòÉ
You can customize a phone book entry to automatically start a LAN application
when a connection is established. Complete these steps to define autostart
information for a phone book entry:
1. From the Settings notebook, select the Phone Book tab.
2. From the list of phone book entries on the Phone Book tab, select a phone
book entry. Select Change to define autostart criteria for the phone book
entry.
3. Select the Autostart tab (shown in Phone Book Entry Autostart Tab for OS/2,
or in Phone Book Entry Autostart Tab for MS Windows for MS Windows).
Phone Book Entry Autostart Tab for OS/2
Phone Book Entry Autostart Tab for MS Windows
4. Select the check box for Autostart program when connection established.
5. For OS/2 only, from the Program title field, specify the name of the LAN
application.
This name is added to the OS/2 window list when the LAN application is
started.
6. In the Path and file name field, specify the fully-qualified path and file
name for your LAN application.
If you are using the autostart feature to automatically start a command
file, then specify the path and file name for the command file.
7. In the Parameters field, specify any parameters necessary to start your LAN
application.
8. From the Autostart tab, double-click on the system menu symbol to return to
the Phone Book tab. To save changes made to the phone book entry, close
the Settings notebook.
ΓòÉΓòÉΓòÉ 12.3. Customizing a Phone Book Entry for Calling Card Use ΓòÉΓòÉΓòÉ
Warning: Every time you dial out from your LAN Distance Remote workstation
using a calling card, calling card information for that phone book entry is
recorded in a LAN Distance file, and can be viewed by anyone who has access to
your machine.
You have the option of including calling card information when you define a
telephone number for a LAN Distance Remote or LAN Distance Connection Server.
This allows you to charge the cost for a long distance connection to your
calling card.
You can temporarily customize telephone numbers from the Phone Book, or you can
add or change telephone numbers through the Settings notebook by making the
appropriate selections from the Phone Book tab. See Creating a Phone Book
Entry.
ΓòÉΓòÉΓòÉ 12.3.1. Example: Adding Calling Card Information to a Telephone Number ΓòÉΓòÉΓòÉ
Adding Calling Card Information to a Phone Book Entry shows a telephone number
that is set up to use a calling card number. In this example, the telephone
number (4445551234) is preceded by a number that identifies the long distance
carrier (102880) and a 0. After the telephone number is dialed, the modem
pauses (,,) to wait for a gong tone before dialing the calling card number.
The comma (,) dial modifier is used to instruct the modem to pause for 2
seconds. Use several commas for a longer delay.
The comma is a dial modifier that is common to most modems. Any dial modifier
defined for your modem can be entered in the Telephone number to be dialed
field. For more information about dial modifiers, see your modem manual.
Adding Calling Card Information to a Phone Book Entry
ΓòÉΓòÉΓòÉ 12.3.2. Maximum Number of Characters for a Telephone Number ΓòÉΓòÉΓòÉ
A LAN Distance telephone number field can contain a maximum of 50 characters.
Your modem buffer may hold more or less than the maximum number of 50
characters. Many modems have a buffer size of 40. Every dial prefix and suffix
character transmitted with the telephone number reduces the buffer space for
your modem by 5 characters.
If the information for your calling card and telephone number exceeds the
maximum number of 50 characters, you can customize the dialing string in the
PIF file for your modem type. For more information, see "Customizing the Dial
String for Asynchronous Modems," in LAN Distance Advanced Guide.
ΓòÉΓòÉΓòÉ 13. Using the Phone Book to Establish a Connection ΓòÉΓòÉΓòÉ
This chapter describes using the phone book to dial out and establish a
connection, provides steps for logging on to a secure LAN Distance Connection
Server, and tells you how to customize your dial setup for automatic re-dial.
ΓòÉΓòÉΓòÉ 13.1. Dialing Out to Establish a Connection ΓòÉΓòÉΓòÉ
You must dial out and establish a connection before you can start a LAN
application. Use the phone book to dial out, monitor call connection status,
and hang up a connection.
Complete these steps to dial out and establish a LAN Distance connection:
1. From the menu bar on the LAN Distance Workstations window, select Selected,
Open as, then Phone Book to open the phone book shown in LAN Distance Phone
Book. (Double-clicking on the icon for your workstation takes you directly
to the phone book.)
LAN Distance Phone Book
2. Select the phone book entry for the LAN Distance workstation you want to
dial from the list of phone book entries in the list box to the left of the
phone book. Use the arrow keys in the bottom right corner of the phone
book to browse through the pages in the phone book.
3. Select Dial to initiate a connection.
When you dial out to establish a connection, telephone numbers in the phone
book entry's dial order list are dialed until a connection is established
or a dial retry limit is reached.
4. As a connection is established, connection status is displayed in the
Status field of the phone book.
You can issue commands to start a LAN application when Connected is
displayed in the Status field.
ΓòÉΓòÉΓòÉ 13.2. Temporarily Changing a Phone Number for a Phone Book Entry ΓòÉΓòÉΓòÉ
Use the phone book to make temporary changes to a phone book entry at dial
time. For example, you may need to call a telephone number not in the dial
order list or reorder the dialing sequence.
Complete these steps to temporarily change dialing information for a phone book
entry:
1. Select the phone book entry for the LAN Distance workstation you want to
dial from the list of phone book entries.
2. Select the Alternate push button to make temporary changes to a telephone
number or the dial order list.
Dial Order List for a Phone Book Entry
3. From the Telephone number call order list, select the telephone number you
want to modify. Use the Add, Change or Delete push button to change the
telephone number or its position in the dial order list.
Adding a Telephone Number Window
The changes you make to the dial order list for a phone book entry are not
saved when you close the phone book. To save changes made to a phone book
entry, modify the phone book entry through the Phone Book tab in the
Settings notebook.
ΓòÉΓòÉΓòÉ 13.3. Logging On to a Secure LAN Distance Workstation ΓòÉΓòÉΓòÉ
Logon information is required to establish a connection when you dial a secure
LAN Distance workstation. When the Logon window shown in LAN Distance Logon
Window is displayed, type your user ID in the User ID field and your passphrase
in the Passphrase field.
The logon information you supply is compared with the user account information
set up for you at the secure LAN Distance workstation.
LAN Distance Logon Window
Callback is another security feature that helps to prevent a connection from
being established with an unauthorized user. A LAN Distance security
administrator enables the callback option in your user account at the secure
LAN Distance workstation.
Callback for your user account can either be defined as fixed or variable. If
callback is fixed, as a part of the connection process, the LAN Distance
Connection Server will call your workstation back when you dial in.
For variable call back, you must supply a telephone number when the Variable
Callback window, shown in Variable Callback Window, is displayed.
Variable Callback Window
When the call back process is complete, the phone book Status field displays
the Connected message.
ΓòÉΓòÉΓòÉ 13.4. Hanging Up a Call ΓòÉΓòÉΓòÉ
Your LAN Distance connection remains active until you hang up, the LAN Distance
workstation on the other end of the connection hangs up, or the LAN Distance
product is stopped on either LAN Distance workstation.
When you are finished using the LAN applications running over your LAN Distance
connection, select the Hang Up push button from the phone book.
Note: Logging off from the command line or the pull-down, does not disconnect
your LAN Distance connection. Until you hang up, the connection remains active
and charges may be incurred.
ΓòÉΓòÉΓòÉ 13.5. Customizing Your Dial Setup ΓòÉΓòÉΓòÉ
Open the Settings notebook and select the Dial tab, shown in Dial Tab in the
Settings Notebook to customize your dial setup for the following features:
o Automatic re-dial for your phone book
o Display a pop-up for an incoming call
o Display pop-ups for an unexpected disconnect
Dial Tab in the Settings Notebook
ΓòÉΓòÉΓòÉ 13.5.1. Setting Up Your Phone Book for Automatic Redial ΓòÉΓòÉΓòÉ
You can customize your dial setup to automatically re-dial the phone book entry
until a connection is established. Use the Retry count and the Retry interval
fields to specify your re-dial requirements.
For example, you can set up your LAN Distance Remote to re-dial a LAN Distance
Connection Server twice, with a delay of 60 seconds between each attempt, by
setting the Retry count to 2 and the Retry interval to 60.
Note: If multiple numbers are defined in the dial order list for a phone book
entry, each number in the dial order list is dialed in sequence when a phone
book entry is re-dialed.
ΓòÉΓòÉΓòÉ 13.5.2. Displaying a Pop-Up for an Incoming Call ΓòÉΓòÉΓòÉ
Your LAN Distance Remote is initially set up to display a pop-up message when
an incoming call is received. If you do not want to receive a pop-up message,
deselect the Incoming call check box to turn off this feature.
ΓòÉΓòÉΓòÉ 13.5.3. Displaying Pop-Ups for an Unexpected Disconnect ΓòÉΓòÉΓòÉ
An incoming or outgoing call can be unexpectedly disconnected. Initially, your
LAN Distance Remote is configured to display a disconnect message when a call
is unexpectedly disconnected.
If you do not want to be notified when a connection is unexpectedly
disconnected, deselect the Unexpected disconnect of incoming call and
Unexpected disconnect of outgoing call check boxes to turn off this feature.
You may receive an unexpected disconnect message when:
o Interference occurs on the telephone line
o The LAN Distance Connection Server or LAN Distance Remote you dial has
stopped the LAN Distance product or is turned off.
o The LAN Distance logical adapter network address on your LAN Distance Remote
conflicts with a LAN network address on the LAN you dial.
o The LAN Distance Connection Server or LAN Distance Remote you dial may have
selected the Connect to a non-LAN Distance destination check box.
The selection for this check box at the LAN Distance workstation you dial
must match the selection on your LAN Distance Remote. Go to the Workstation
tab in the Settings notebook to verify the selection for your LAN Distance
Remote.
Note: If you are running a LAN application when a call is unexpectedly
disconnected, you may receive a LAN application error message. Dial the LAN
Distance Connection Server to re-establish the connection. You may have to
stop, then restart your LAN application.
ΓòÉΓòÉΓòÉ 13.6. Maintaining Your User Account on Secure LAN Distance Workstations ΓòÉΓòÉΓòÉ
A user account is set up for you on every secure LAN Distance workstation you
dial. You can view your personal user account and change your passphrase after
a connection is established with a secure LAN Distance workstation.
To change your personal account information on a secure LAN Distance
workstation:
1. Select the icon for the secure LAN Distance Connection Server in the LAN
Distance Workstations window.
2. From the menu bar on LAN Distance Workstations window, select Selected,
Open as, then Personal account information.
3. If the LAN Distance Logon window is displayed, specify your user ID and
passphrase.
When you have successfully logged on, the General and Passphrase tabs
containing your personal account information are displayed.
4. To change your passphrase, select the Passphrase tab. Specify current and
new passphrase information in the appropriate fields.
Passphrase Tab
5. To verify your changes, select the Verify Passphrase push button.
A message is displayed when your passphrase is validated. Select OK.
6. Double-click on the system menu symbol to close the Personal account
information notebook and return to the LAN Distance Workstations window.
ΓòÉΓòÉΓòÉ 13.7. Automatically Dialing a Phone Book Entry on an OS/2 Workstation ΓòÉΓòÉΓòÉ
You can set up your OS/2 workstation to automatically dial a phone book entry.
See Using the LDIST DIAL Command in Using LAN Distance Commands for OS/2
Workstations.
ΓòÉΓòÉΓòÉ 13.8. Automatically Dialing a Phone Book Entry on a MS Windows Workstation ΓòÉΓòÉΓòÉ
You can set up your MS Windows workstation to automatically dial a phone book
entry when you start the LAN Distance product.
To dial automatically, you must change the program properties for the LAN
Distance program icon in your Program Manager window by completing these steps:
1. Open the Program Manager window.
2. Open the LAN Distance group.
3. Select the LAN Distance icon.
4. Select File in the Program Manager menu bar.
5. Select Properties in the File menu. The current properties for the LAN
Distance program icon are displayed.
Program Properties Window
6. The Command Line field, contains this information:
c:\wal\enmgr.exe
where c:\wal is the drive and path where you installed the LAN Distance
Remote product.
Edit the Command Line field as in the example below to automatically dial a
phone book entry when you start the LAN Distance product. The example uses
a phone book entry named PSTN CALL:
c:\wal\enmgr.exe DIAL /D:"PSTN CALL"
Note: Phone book entry names, for example PSTN CALL, are case-sensitive.
Enter the name specified when you configured the phone book entry. Enclose
the name in double quotes if it contains blanks.
7. Select the OK pushbutton.
After completing these steps, whenever you double-click on the LAN Distance
icon, the Phone Book automatically opens and dials the phone book entry you
specified.
ΓòÉΓòÉΓòÉ 13.8.1. Using the User ID and Passphrase Options ΓòÉΓòÉΓòÉ
In addition to dialing automatically, you can also automatically log on when
the connection is established.
To dial and automatically log on as user ID User with a passphrase of The
passphrase, enter the following in the Command Line field:
c:\wal\enmgr.exe DIAL /D:"PSTN CALL" /U:User /P:"The passphrase"
NOTE: Passphrases are case-sensitive. If your passphrase contains blanks,
enclose it in double quotes as in the example above.
ΓòÉΓòÉΓòÉ 13.8.2. Using the Number Option ΓòÉΓòÉΓòÉ
You can override the telephone number configured in your phone book entry. The
following example shows you how to edit the Command Line field to dial a number
other than the one configured in the phone book entry. The number configured in
the phone book entry is not changed, it is just temporarily ignored.
c:\wal\enmgr.exe DIAL /D:"PSTN CALL" /N:555-5555
Any of the options can be used together with the autodial feature. The only
mandatory information is the phone book entry name.
ΓòÉΓòÉΓòÉ 14. Answering Incoming Calls for OS/2 Workstations ΓòÉΓòÉΓòÉ
This chapter describes setting up your LAN Distance workstation to answer
calls, customizing your answer setup to automatically start an answer mode, and
stopping an active answer mode.
ΓòÉΓòÉΓòÉ 14.1. Setting Up Your LAN Distance Remote to Answer Calls ΓòÉΓòÉΓòÉ
Answering a call is another way to establish a LAN Distance connection. Other
LAN Distance workstations may call you to access resources on your LAN Distance
Remote or conference electronically using a product such as IBM's Person to
Person/2.
Complete these steps to set up your LAN Distance Remote to answer calls:
1. Open the Settings notebook, and select the Answer tab, shown in Answer Tab
in the Settings Notebook.
Answer Tab in the Settings Notebook
2. From the list box on the Answer tab, select the PSTN_ALL_CALLS answer mode.
This predefined answer mode defines answer criteria for all PSTN
(asynchronous and synchronous) calls. An answer mode is similar to a phone
book entry and contains answer criteria that defines the ports where you
want to receive calls.
3. Select the Start mode push button to activate this answer mode.
Activating an answer mode sets up your LAN Distance Remote to answer calls
using the criteria defined for this answer mode until you close the LAN
Distance Workstations window, or stop the LAN Distance Remote product.
You can stop an active answer mode at any time by selecting the Stop mode
push button.
ΓòÉΓòÉΓòÉ 14.2. Stopping an Answer Mode ΓòÉΓòÉΓòÉ
Whether you set up an auto answer mode to automatically start when you start
the LAN Distance product or you manually start an answer mode, you can stop an
answer mode at any time.
Complete these steps to stop an answer mode:
1. Open the Settings notebook and select the Answer tab, shown in Answer Tab
in the Settings Notebook.
2. From the Answer modem list, select the answer mode you want to stop.
3. Select the Stop mode push button to deactivate this answer mode.
ΓòÉΓòÉΓòÉ 14.3. Automatically Starting an Answer Mode When LAN Distance Is Started ΓòÉΓòÉΓòÉ
You can customize your LAN Distance Remote to automatically activate one or
more answer modes when you start the LAN Distance product. If you set up your
LAN Distance Remote to autostart an answer mode, you do not have to select an
answer mode every time you start the LAN Distance Remote product.
1. Open the Settings notebook and select the Answer tab, shown in Answer Tab
in the Settings Notebook.
2. From the Answer mode list, select the answer mode you want to activate at
start up. Select Change to open the answer mode notebook.
3. Select the Enable answer mode on startup check box.
4. Repeat steps 2 and 3 for every answer mode you want to automatically
activate when you start the LAN Distance product.
5. Close the Answer tab to save your changes and return to the Settings
notebook.
ΓòÉΓòÉΓòÉ 14.4. Automatically Starting LAN Applications for Incoming Calls ΓòÉΓòÉΓòÉ
You can customize an answer mode to automatically start a LAN application or
command file on your LAN Distance Remote when a call is answered and a
connection is established.
Complete these steps to define autostart information for an answer mode:
1. Open the Settings notebook, and select the Answer tab, shown in Answer Tab
in the Settings Notebook.
2. From the Answer mode list, select the answer mode you want to set up to
automatically start a LAN application.
3. Select the Change push button and select the Autostart tab shown in
Autostart Tab in Answer Settings.
Autostart Tab in Answer Settings
From the Autostart tab, select the Autostart program when connection
established field.
4. From the Program title field, specify the name for the LAN application.
This name is added to the OS/2 window list when the LAN application is
started.
5. From the Path and file name field, specify the fully-qualified path and
file name for your LAN application.
If you are using the autostart feature to automatically start a command
file, then specify the path and file name for the command file.
6. In the Parameters field, specify any parameters necessary to start your LAN
application.
7. From the Autostart tab, double-click on on the system menu symbol to return
to the Answer tab in the Settings notebook. Close the Answer tab to save
your changes.
ΓòÉΓòÉΓòÉ 15. Answering Incoming Calls for MS Windows Workstations ΓòÉΓòÉΓòÉ
This chapter describes how to set up your LAN Distance workstation to answer
calls.
ΓòÉΓòÉΓòÉ 15.1. Setting Up Your MS Windows Workstation to Answer Calls ΓòÉΓòÉΓòÉ
You can establish a LAN Distance connection by answering a call. Other LAN
Distance workstations may call you to access resources on your LAN Distance
Remote or to conference electronically.
Complete these steps to set up your LAN Distance Remote to answer calls:
1. From the Program Manager applications window, double-click on the LAN
Distance group icon.
2. From the LAN Distance group window, double-click on the LAN Distance icon.
The LAN Distance Workstations window is displayed.
3. Double-click on your workstation icon to open the Phone Book (shown in
Phone Book for MS Windows Workstations).
Phone Book for MS Windows Workstations
4. From the Phone Book window, select the Answer push button to open the
Answer Mode window. (See Answer Mode Window for MS Windows Workstations.)
Answer Mode Window for MS Windows Workstations
Activate answer to set up your LAN Distance Remote to answer calls until
you select the Stop Answer or Cancel push button.
ΓòÉΓòÉΓòÉ 15.2. Automatically Starting an Answer Mode ΓòÉΓòÉΓòÉ
You can customize your LAN Distance Remote to automatically answer calls when
you start the LAN Distance Remote product. To set up your LAN Distance Remote
to autoanswer calls:
1. Open the Settings notebook and select the Answer tab, shown in Answer Tab
in the Settings Notebook.
Answer Tab in the Settings Notebook
2. Select the Enable answer mode on startup check box.
3. Close the Settings notebook to save your changes.
ΓòÉΓòÉΓòÉ 15.3. Stopping an Answer Mode ΓòÉΓòÉΓòÉ
However your LAN Distance Remote is set up to answer calls, you can stop answer
at any time.
1. Display the window. This window should already be opened, but may be
minimized.
2. Select the Stop Answer push button, or select the Cancel push button to
stop answer and return to the Phone Book window.
ΓòÉΓòÉΓòÉ 15.4. Automatically Starting DOS or MS Windows LAN Applications ΓòÉΓòÉΓòÉ
You can customize the answer feature to automatically start a LAN application
or command file after a call is answered and a connection is established.
1. Open the Settings notebook and select the Answer tab, shown in Answer Tab
in the Settings Notebook.
2. Select the Autostart when connection is established check box.
3. In the Path and file name field, specify the fully qualified path and file
name of your LAN-based program.
4. From the Initial window size drop-down list, select the initial window size
for your LAN-based program.
5. Close the Settings notebook to save your changes.
ΓòÉΓòÉΓòÉ 16. Using the Shuttle Feature for OS/2 ΓòÉΓòÉΓòÉ
This chapter explains how to enable and then invoke the LAN Distance Shuttle
feature, and provides guidelines for installing LAN applications after you have
installed the LAN Distance Remote product.
ΓòÉΓòÉΓòÉ 16.1. Setting Up Your Workstation to Shuttle ΓòÉΓòÉΓòÉ
The Shuttle feature allows you to use your workstation and its applications in
the LAN-attached and the LAN Distance Remote environments. Shuttling
automatically switches your workstation's configuration from one environment to
the other.
If you plan to use Shuttle to switch between the LAN-attached and remote
environments, you should have a working LAN-attached configuration set up
before you invoke Shuttle. If you invoke the Shuttle feature before your
LAN-attached configuration is setup, the LAN Distance Remote product supplies a
default IBM Token-Ring configuration so you can shuttle. Use the LAPS interface
to change this default configuration.
ΓòÉΓòÉΓòÉ 16.2. Enabling Shuttle on Your LAN Distance Remote Workstation ΓòÉΓòÉΓòÉ
Before you can invoke the Shuttle feature, it must be enabled on your
workstation.
ΓòÉΓòÉΓòÉ 16.2.1. Installing the LAN Distance Product on a LAN-attached Workstation ΓòÉΓòÉΓòÉ
If you install the LAN Distance Remote product on a workstation that is
configured as a LAN-attached workstation, the LAN Distance Shuttle feature is
already enabled.
ΓòÉΓòÉΓòÉ 16.2.2. Installing the LAN Distance Product on a non LAN-attached Workstation ΓòÉΓòÉΓòÉ
If you install the LAN Distance Remote product on a workstation that does not
have a LAN-attached configuration, the Shuttle feature is not enabled. Before
you can invoke the Shuttle feature and switch the environment configured for
your workstation, enable this feature.
After you install the LAN Distance Remote product and restart your workstation,
complete these steps to enable the Shuttle feature:
1. Open the Settings notebook and select the Workstation tab, shown in
Workstation Tab.
Workstation Tab
2. From the Workstation tab, select the Shuttle between LAN-attached
workstation and remote workstation field.
3. Close the Settings notebook to save changes.
4. When the Shuttle feature is enabled, each time you close the LAN Distance
Workstations window the Shuttle Option window shown in Shuttle Option
Window is displayed. Select the configuration that you want to use after
you restart your workstation.
Shuttle Option Window
ΓòÉΓòÉΓòÉ 16.3. Invoking Shuttle on Your LAN Distance Remote Workstation ΓòÉΓòÉΓòÉ
After you enable the Shuttle feature on your workstation, invoke the Shuttle
feature using one of the following options.
ΓòÉΓòÉΓòÉ 16.3.1. Using the Shuttle Option Window to Shuttle ΓòÉΓòÉΓòÉ
If the Shuttle feature is enabled on your LAN Distance Remote, the Shuttle
Option window, shown in Shuttle Option Window, is displayed each time you close
the LAN Distance Workstations window.
The default setting for the Shuttle Option window is your current workstation
configuration. If you do not want to shuttle, select the Cancel push button.
To switch from your current configuration, select the radio button for the
configuration you want to shuttle to when you restart your workstation, then
select OK. To activate your shuttle selection, shut down and restart your
workstation.
ΓòÉΓòÉΓòÉ 16.3.2. Using the OS/2 Command Line to Shuttle ΓòÉΓòÉΓòÉ
If the Shuttle feature is enabled, you can enter any of the following commands
from the OS/2 command line:
LDSHUTTL
Entering this command displays the Shuttle Option window if shuttle is
enabled on your workstation. A pop-up message is displayed after the LAN
Distance product switches your remote and LAN configurations.
LDSHUTTL LAN
Entering this command allows you to shuttle from a LAN Distance Remote to a
LAN-attached workstation. After the LAN Distance product switches your
remote and LAN configurations, a system response is displayed.
LDSHUTTL REMOTE
Entering this command allows you to shuttle from a LAN-attached workstation
to a LAN Distance Remote. After the LAN Distance product switches your LAN
and remote configurations, a system response is displayed.
ΓòÉΓòÉΓòÉ 16.3.3. Opening the LAN Distance Workstations Window from a LAN-Attached Workstation ΓòÉΓòÉΓòÉ
LAN-attached workstations can invoke the Shuttle Option window simply by
double-clicking on the LAN Distance icon.
ΓòÉΓòÉΓòÉ 16.4. Considerations for Changing Your LAN Configuration ΓòÉΓòÉΓòÉ
If you install a LAN application after you install the LAN Distance Remote
product, only your active configuration and its PROTOCOL.INI file are updated.
To use the application in both the remote and LAN-attached environments, you
need to update the PROTOCOL.INI for the configuration that was inactive when
you installed and configured this application.
To update the PROTOCOL.INI file for the inactive configuration, follow these
steps:
1. Invoke the Shuttle feature and switch to the inactive configuration. Do not
shut down your workstation to activate this configuration until you
complete step 10.
Switching to the inactive configuration allows you to update the
PROTOCOL.INI for this file.
2. From an OS/2 command line, go to the \IBMCOM directory and type LAPS to
start LAPS.
3. From the LAPS IBM Logo window, shown in LAPS IBM Logo Window, select the
Configure push button.
LAPS IBM Logo Window
4. From the Configuration window, select the Configure LAN transports radio
button and then select the Continue push button.
Configuration Window
5. In the Configure Workstation window, shown in LAPS Configure Workstation
Window, the network adapter for the inactive configuration you shuttled to
in step 1 is highlighted in the Current Configuration field.
If your inactive configuration is your LAN Distance Remote configuration,
the LAN Distance Logical Adapter is highlighted. If your LAN-attached
configuration is inactive, your Token-Ring or Ethernet LAN adapter is
highlighted in the Current Configuration field.
LAPS Configure Workstation Window
6. From the Protocols field, select the LAN protocol for the LAN application
you installed and configured to update the PROTOCOL.INI for the inactive
configuration.
7. Select Add to add the protocol you selected to the protocols currently
configured for the network adapter that is currently inactive.
8. Select OK to exit the Configure Workstation window.
9. From the CONFIG.SYS Updates window, shown in CONFIG.SYS Updates Window,
select the Continue push button.
CONFIG.SYS Updates Window
10. From the LAPS IBM logo window, select Exit.
ΓòÉΓòÉΓòÉ 16.5. Shuttling with PCMCIA Adapters ΓòÉΓòÉΓòÉ
If your workstation contains either a PCMCIA Token-Ring Adapter or a PCMCIA
asynchronous modem adapter, you must complete the appropriate steps below after
installing the LAN Distance Remote product. You cannot properly shuttle to the
LAN Distance Remote environment until these changes are made:
For a PCMCIA Token-Ring Adapter
1. Use an ASCII text editor to edit the \IBMCOM\MACS\IBMTOKCS.NIF file.
a. Find the [FILE] section.
b. To the Name = line, add all required device driver names in order. For
example, the IBM ThinkPad requires this order:
DEVICE=x:\$ICPMOS2.SYS
DEVICE=x:\IBMTOKCS.OS2
DEVICE=x:\IBM2SS02.SYS
DEVICE=x:\ICRMU02.SYS
The Name = line changes to:
Name = $ICPMOS2.SYS, IBMTOKCS.OS2, IBM2SS02.SYS, ICRMU02.SYS
2. Copy all the device drivers listed in the "Name =" line to the \IBMCOM\MACS
subdirectory, if they are not already there.
For a PCMCIA asynchronous modem adapter
1. Use an ASCII text editor to edit the \IBMCOM\MACS\PDFH.NIF file.
a. Find the [FILE] section.
b. To the Name = line, add all the required device driver names in order.
For example, the IBM ThinkPad requires this order:
DEVICE=x:\$ICPMOS2.SYS
DEVICE=x:\PDFH.OS2
DEVICE=x:\IBM2SS02.SYS
DEVICE=x:\ICRMU02.SYS
The Name = line changes to:
Name = $ICPMOS2.SYS, PDFH.OS2, IBM2SS02.SYS, ICRMU02.SYS
2. Copy all the device drivers listed in the Name = line to the \IBMCOM\MACS
subdirectory if they are not already there.
The required device drivers are described in the PCMCIA Adapter documentation
and are included on the adapter's accompanying diskette. The device driver
names are specific to each brand of adapter.
The LAN Distance Remote product ships, installs, and requires the
\IBMCOM\MACS\PDFH.NIF file and its associated device driver, PDFH.OS2.
Note: Use this editing technique for any adapters that use multiple device
drivers that require a specific order in the CONFIG.SYS file.
ΓòÉΓòÉΓòÉ 16.6. Fixing DEVICE= Statement Parameter Loss during Shuttle ΓòÉΓòÉΓòÉ
If shuttling loses parameters on any DEVICE= statements in the CONFIG.SYS file,
follow these steps to correct the problem:
1. Use an ASCII text editor to edit the \WAL\WCLLOCAL.INI file.
2. Find the [SHUTTLE] section:
[SHUTTLE]
D1 = ESTDFM.OS2
P1 = S1C2
D2 = IBM2SS01.SYS
P2 = /S0=1
Note: This section exists only if your workstation contains one of the IBM
PCMCIA adapters. If you cannot find this section, add [SHUTTLE] on a new
line and start with D1 = and P1 = for the device name and parameter lines.
3. For each DEVICE= statement, add a Dx = line for the device name and a Px =
line for the device parameter(s). In both lines, x is the next sequential
number.
For example, if you have the following DEVICE= statements in your
CONFIG.SYS file:
DEVICE=x:\dev_name1.sys /parm1 /parm2
DEVICE=x:\dev_name2.sys /parm3
To the [SHUTTLE] section, add:
D3 = dev_name1.sys
P3 = /parm1 /parm2
D4 = dev_name2.sys
P4 = /parm3
Warning:
Running LAPS configuration may lose parameters on DEVICE= statements. If this
happens, shuttle to your inactive configuration, and then shuttle back to your
previously active configuration. This will restore the parameters defined in
the [SHUTTLE] section.
ΓòÉΓòÉΓòÉ 17. Using the Shuttle Feature for MS Windows ΓòÉΓòÉΓòÉ
The Shuttle utility is installed as an icon on the LAN Distance Remote
container window. Invoke shuttle by selecting the icon or entering
LDSHUTTL.EXE at the Windows Run command line. Parameters are not used for the
MS Windows LDSHUTTL.EXE utility.
ΓòÉΓòÉΓòÉ 17.1. Setting Up Your Workstation to Shuttle ΓòÉΓòÉΓòÉ
The Shuttle feature allows you to use your workstation and its applications in
the LAN-attached and the LAN Distance Remote environments. Shuttling
automatically switches your workstation's configuration from one environment to
the other.
Before you can use Shuttle to switch between the LAN-attached and remote
environments, you should have a working LAN-attached configuration set up
before you invoke Shuttle. If you invoke the Shuttle feature before your
LAN-attached configuration is set up, the LAN Distance Remote product supplies
a default IBM Token-Ring configuration so you can shuttle.
ΓòÉΓòÉΓòÉ 17.2. Enabling Shuttle on Your LAN Distance Remote ΓòÉΓòÉΓòÉ
The Shuttle feature must be enabled on your workstation before you can shuttle.
ΓòÉΓòÉΓòÉ 17.2.1. Using the Shuttle Option Window to Shuttle ΓòÉΓòÉΓòÉ
If the Shuttle feature is enabled on your LAN Distance Remote, the Shuttle
Option window, shown in Shuttle Option Window for MS Windows Workstations, is
displayed each time you close the LAN Distance Workstations window.
The default setting for the Shuttle Option window is your current workstation
configuration. If you do not want to shuttle, select the Cancel push button.
To switch from your current configuration, select the radio button for the
configuration you want to shuttle to when you restart your workstation, then
select OK. Exit and restart your workstation to activate your shuttle
selection.
ΓòÉΓòÉΓòÉ 17.2.2. Installing the LAN Distance Product on a non LAN-attached Workstation ΓòÉΓòÉΓòÉ
If you install the LAN Distance Remote product on a workstation that does not
have a LAN-attached configuration, the Shuttle feature is not enabled. Before
you can invoke the Shuttle feature and switch the environment configured for
your workstation, enable the LAN-attached configuration.
After you install the LAN Distance Remote product and restart your workstation,
complete these steps to enable the Shuttle feature:
To enable or disable the Shuttle feature:
1. Open the Settings notebook for your LAN Distance Remote.
2. Select the Workstation tab shown in Workstation Tab for MS Windows
Workstations.
Workstation Tab for MS Windows Workstations
3. Select Enable shuttling between LAN and remote workstation.
4. Close the Settings notebook and save the values.
The Shuttle feature is now enabled.
ΓòÉΓòÉΓòÉ 17.3. Invoking Shuttle on Your LAN Distance Remote ΓòÉΓòÉΓòÉ
After you enable the Shuttle feature on your workstation, invoke the Shuttle
feature using one of the following options.
ΓòÉΓòÉΓòÉ 17.3.1. Using the Shuttle Option Window to Shuttle ΓòÉΓòÉΓòÉ
If the Shuttle feature is enabled on your LAN Distance Remote, the Shuttle
Option window, shown in Shuttle Option Window for MS Windows Workstations, is
displayed each time you close the LAN Distance Workstations window.
The default setting for the Shuttle Option window is your current workstation
configuration. If you do not want to shuttle, select the Cancel push button.
To switch from your current configuration, select the radio button for the
configuration you want to shuttle to when you restart your workstation, then
select OK. Exit and restart your workstation to activate your shuttle
selection.
ΓòÉΓòÉΓòÉ 17.3.2. Using the Run Command Line to Shuttle ΓòÉΓòÉΓòÉ
If the Shuttle feature is enabled, you can type the following command from the
Run command line:
1. In the Program Manager window, select the File menu bar choice.
2. Select Run.
The Run window is displayed.
3. In the Command Line field, type:
LDSHUTTL
4. Select the OK push button.
The Shuttle Option window is displayed.
Shuttle Option Window for MS Windows Workstations
5. To shuttle from a LAN Distance Remote to a non-LAN Distance LAN-attached
workstation, select LAN workstation.
6. To shuttle from a non-LAN Distance LAN-attached workstation to a LAN
Distance Remote, select Remote workstation.
7. Select the OK push button.
A pop-up message is displayed after the LAN Distance Remote product switches
your remote and LAN configurations.
ΓòÉΓòÉΓòÉ 17.3.3. Opening the Shuttle Option Window from a LAN-Attached Workstation ΓòÉΓòÉΓòÉ
A LAN-attached workstation can invoke the Shuttle Option window simply by
double-clicking on the Shuttle icon.
ΓòÉΓòÉΓòÉ 17.4. Installing Your LAN Applications after the LAN Distance Remote Product ΓòÉΓòÉΓòÉ
The Shuttle feature offers the same function as the OS/2 version, but behaves
significantly different. Because of the difficulties of detecting the
LAN-attached support software, the Shuttle utility maintains two copies of the
CONFIG.SYS and AUTOEXEC.BAT files: one for LAN Distance Remote and one for the
LAN-attached environment. Updates made to either of these files must be
reflected in the other set. For this reason, you should install your LAN
applications first and the LAN Distance Remote product last. For example,
install NetWare, LSP, and any other LAN applications that may alter the
AUTOEXEC.BAT, CONFIG.SYS, or PROTOCOL.INI files first. Install the LAN
Distance Remote product last.
Follow these steps to install a LAN application after you have installed the
LAN Distance Remote product:
1. Shuttle your workstation from a LAN Distance Remote to a non-LAN Distance
LAN-attached workstation.
a. Double-click on the Shuttle icon.
The Shuttle Option window is displayed as shown in Shuttle Option Window
for MS Windows Workstations.
b. To shuttle from a LAN Distance Remote to a non-LAN Distance LAN-attached
workstation, select LAN workstation.
c. Select the OK push button.
The LAN Distance Remote product renames the remote configuration files
with a *.RWS extension.
2. Exit and restart your workstation.
3. Install the LAN application.
4. To use the application in both the remote and LAN-attached environments,
change PROTOCOL.INI in the WAL directory, CONFIG.RWS, and AUTOEXEC.RWS for
the LAN Distance Remote configuration that was inactive when you installed
and configured this application. The installation changes should be
identical for the remote and LAN-attached file sets.
5. Shuttle from a non-LAN Distance LAN-attached workstation to a LAN Distance
Remote.
a. Double-click on the Shuttle icon.
The Shuttle Option window is displayed as shown in Shuttle Option Window
for MS Windows Workstations.
b. To shuttle from a LAN Distance Remote to a non-LAN Distance LAN-attached
workstation, select LAN workstation.
c. Select the OK push button.
6. Exit and restart your workstation.
The LAN Distance Remote product renames the LAN-attached configuration
files with a *.LAN extension.
You can use the LAN applications on your LAN Distance Remote.
ΓòÉΓòÉΓòÉ 18. Hardware Supported for the LAN Distance Remote Product ΓòÉΓòÉΓòÉ
This appendix lists the hardware supported by this release of the LAN Distance
product. See the README file for a list of any modems, WAN adapters, and LAN
adapters that were added after this book was published.
ΓòÉΓòÉΓòÉ 18.1. Workstations ΓòÉΓòÉΓòÉ
For your COM ports to operate at a speed greater than 9600 bps, your
workstation should have FIFO buffering. However, some non-FIFO workstations
with a faster processor (25 MHz and above) and modem (14400 bps or better) can
support higher transmission speeds.
To verify that your workstation has FIFO buffering type: MODE COM1 at an OS/2
command prompt. If the response is BUFFER = N/A, then your workstation does
not have FIFO buffering. See "Avoiding Message WCL0233 When Restarting Your
Workstation" and "Performance Tuning for Non-FIFO Workstations" in the LAN
Distance Advanced Guide for information about using a non-FIFO workstation.
ΓòÉΓòÉΓòÉ 18.2. Modems ΓòÉΓòÉΓòÉ
Almost all modems sold in your country satisfy the homologation requirements of
LAN Distance for use in your country. Modems used by the LAN Distance product
must be homologated in the country of use. The LAN Distance product does not
provide DTE support for country-specific homologation requirements.
Modems Supported by the LAN Distance Product lists the LAN Distance generic
modem types and IBM and other manufacturer's modems that are supported by the
LAN Distance product.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Modems Supported by the LAN Distance Product Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MODEMS Γöé PIF FILE NAME Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé LAN DISTANCE GENERIC MODEMS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Any Modem Not In This List Γöé NOTLIST.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Asynchronous Switched Connection Modem Γöé ASYNCSW.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Asynchronous Leased Line Connection Modem Γöé ASYNCLL.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Synchronous Switched Connection Modem Γöé SYNCSW.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Synchronous Leased Line Connection Modem Γöé SYNCLL.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM AND OTHER MANUFACTURER'S MODEMS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Apex Freedom 14/96 Data/Fax Laptop Modem Γöé APEX1496.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Apex PCMCIA Fax/Modem IBP - 1414 Γöé APEXPCM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé AT&T Comsphere 3820 Γöé ATT3820.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé AT&T DataPort Γöé ATTDP.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé BocaModem 14.4 V.32bis External Modem Γöé BOCA144E.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Complete PC 14400 TurboModem Γöé COMPLETE.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Data Race RediCard Internal Modem Γöé DRREDIMI.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Data Race Thinkpad Internal Modem Γöé DRTURBO.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Digicom Eagle Plus V.32 Γöé EAGLEP.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé GVC FM-144V External Fax Modem Γöé GVCFM144.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé GVC SM-96 External Modem Γöé GVCSM96.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes ACCURA 144 + FAX144 Modem Γöé ACCURA14.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes ACCURA 96 + FAX96 Modem Γöé ACCURA96.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes Optima 14400 Modem Γöé OPTIMA14.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes Optima 9600 Modem Γöé OPTIMA96.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes Optima 28800 Modem Γöé OPTIMA28.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes Ultra 14400 Modem Γöé ULTRA144.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Hayes Ultra 9600 Modem Γöé ULTRA96.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM 7855 Modem (stand-alone and rack-mount Γöé IBM7855.PIF Γöé
Γöé models)(1) Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM ASYNC/SDLC V.32 Modem/A Γöé IBMV32A.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM High Speed Internal Data/Fax Modem Γöé IBMHSINT.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM Microelectronics 14.4/14.4 Data/Fax Modem Γöé IBMTORON.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM PCMCIA Data/Fax Modem Γöé IBMPCMCI.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Intel 14.4EX Modem Γöé INT144EX.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Intel PCFM7600 14.4/14.4 External Modem Γöé INPCFM76.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Intel SatisFAXtion Modem/400 Γöé INTFAX4.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Intel SatisFAXtion Modem/400e Γöé INTFAX4E.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Macronix Fax/Modem Γöé MACRONIX.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Megahertz XJ1144FM PCMCIA Data/Fax Modem Γöé MH144PCM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Megahertz XJ196FM PCMCIA Data/Fax Modem Γöé MH96PCM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Microcom MicroPorte 4232bis Portable Modem Γöé MICROPRT.PIF Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Modems Supported by the LAN Distance Product Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MODEMS Γöé PIF FILE NAME Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Microcom QX/4232bis Modem Γöé MICROCOM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Motorola Codex 3220 Plus Γöé CODX3220.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Motorola Codex 3260 Modem Γöé CODX3260.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Motorola UDS V.3229 Modem Γöé UDSV3229.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Motorola Codex 3261 Fast Γöé CODX326X.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Motorola FasTalk 32bx Modem Γöé FASTALK.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Multitech MT1432 Modem Γöé MT1432.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Multitech MT1432MU Modem Γöé MT1432MU.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Multitech MT932 Modem Γöé MT932.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MWave Windsurfer 14400 Modem Γöé WINDSURF.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Null Modem Γöé NULMODEM.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Practical Peripherals FX PS/2 Internal Modem Γöé PPFXPS2.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Practical Peripherals FXMT Modem Γöé PPFXMT.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Practical Peripherals FXSA Modem Γöé PPFXSA.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Practical Peripherals PM 14400FX Internal Modem Γöé PPPM144.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Practical Peripherals PM 14400FX PKT Modem Γöé PPPM144P.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Racal-Datacom ALM3223 Modem Γöé ALM3223.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Racal-Datacom ALM3226 V.32bis Modem Γöé ALM3226.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Rolm 244PC Telephone Γöé ROLM244.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé SupraFAX V.32bis Modem Γöé SUPRFAX.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Telebit Trailblazer Modem Γöé TELEBIT.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé USRobotics Courier HST DS Γöé USRHSTDS.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé USRobotics Sportster 14400 Modem Γöé USRSPORT.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé USRobotics WorldPort 14400 Modem Γöé USRWPORT.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé USRobotics WorldPort 9600 Modem Γöé USRWPRT9.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ViVa 14.4/FAX Modem Γöé VIVA144.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé Zenith Data Systems 200 Laptop Modem Γöé ZEN2000.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ZOOM EVFPV32bis Internal Modem Γöé ZMPV32BI.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ZOOM EVFXV32 Internal Modem Γöé ZMFXV32I.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ZOOM EVFPV32bis Modem Γöé ZMFPV32B.PIF Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé ZOOM EVFXV32 Modem Γöé ZMFXV32.PIF Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Note: Modems will be added to this list. The file MODEMS.TXT contains an
updated list of modem types. You can find this file in the following locations:
o CompuServe - PSPAPROD forum, in the Library section of LAN Distance
o Using OS2BBS to access IBMLink, in the REMOTE section:
- 3) OS/2 Software Library
- 1) OS/2 Selective Fixes
Wide Area Network Adapters Supported by the LAN Distance Product lists the WAN
adapters supported by the LAN Distance product.
ΓöîΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÉ
Γöé Wide Area Network Adapters Supported by the LAN Distance Product Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé WIDE AREA NETWORK ADAPTERS Γöé PART/MODEL NUMBERS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé NON-MICRO CHANNEL ADAPTERS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM ISDN Co-Processor(2) Γöé 94F4311 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM Wide Area Connector/A (ISA) Γöé 33G8469 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM Realtime Interface Co-Processor Multiport Γöé 33F8791 Γöé
Γöé Model 2 (1 MB) (1) Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM WaveRunner* Digital Modem Γöé 73G1393 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé MICRO CHANNEL ADAPTERS Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö¼ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM ISDN Co-Processor/2 Model 2(2) Γöé 44F7228 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM Wide Area Connector/A (MC) Γöé 33G8465 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM Dual Asynchronous Adapter/A Γöé 6451013 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM Realtime Interface Co-Processor Portmaster/A Γöé 53F2604 Γöé
Γöé (1 MB) (1) Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM Realtime Interface Co-Processor Portmaster/A Γöé 53F2607 Γöé
Γöé (2 MB) (1) Γöé Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM WaveRunner Digital Modem Γöé 60G0736 Γöé
Γö£ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö╝ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöñ
Γöé IBM ISDN Primary Rate Adapter (ISA) Γöé 06H2153 Γöé
ΓööΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓö┤ΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÇΓöÿ
Note: Adapters will be added to this list. The file ADAPTERS.TXT contains an
updated list of adapters. You can find this file in the following locations:
o CompuServe - PSPAPROD forum, in the Library section of LAN Distance
o Using OS2BBS to access IBMLink, in the REMOTE section:
- 3) OS/2 Software Library
- 1) OS/2 Selective Fixes
ΓòÉΓòÉΓòÉ 19. Setup Considerations for Some Popular LAN Applications ΓòÉΓòÉΓòÉ
This section describes how to set up your LAN Distance workstation to support
some popular network operating systems and LAN applications.
ΓòÉΓòÉΓòÉ 19.1. IBM LAN Server and Requester ΓòÉΓòÉΓòÉ
From your LAN Requester workstation you can use the LAN Distance product to
establish a connection to any LAN Server workstation. You can also establish a
LAN Distance connection between LAN Server workstations on separate LANs.
These configurations are illustrated in LAN Requester and LAN Server Setup.
LAN Requester and LAN Server Setup
ΓòÉΓòÉΓòÉ 19.1.1. Setup Considerations for LAN Requester and LAN Server ΓòÉΓòÉΓòÉ
Review the following set-up considerations for using the LAN Requester and LAN
Server products with the LAN Distance product.
o The LAN Distance product supports version 2.0 and higher of the IBM LAN
Server and LAN Requester products.
o Install the LAN Server and Requester products before you install the LAN
Distance product.
o Install the LAN Distance Remote product on your stand-alone LAN Requester
workstation to establish a connection to a LAN Server workstation.
o As shown in LAN Requester and LAN Server Setup, the LAN Distance Connection
Server product can be installed on any LAN workstation. It does not need to
be installed on your LAN Server to access resources at the LAN Server
workstation.
o If you are using LAN Server or LAN Requester 3.0, install Corrective Service
Diskette (CSD) IP07001 on:
- every LAN Requester 3.0 workstation using LAN Distance to establish a
connection to a LAN Server
- every LAN Server 3.0 workstation that you will access using the LAN
Distance product.
To obtain CSD IPO7001, contact IBM Software Solutions at 1-800-992-4777
(United States), 1-800-465-2222 (Canada), or 1-800-426-1774 (International).
o If you are running version 2.0 or 3.0 of the DOS LAN Requester on your MS
Windows LAN Distance Remote, you should install CSD 7003 for the DOS LAN
Requester product. If you do not have access to CSD 7003, see Using DOS LAN
Requester.
o Recommended configuration changes for LAN Server and LAN Requester are
described in Modifying LAN Server and Requester Configurations.
o If you are running DOS LAN Requester, complete the steps described in
Changing DOS LAN Requester Performance Parameters.
ΓòÉΓòÉΓòÉ 19.1.2. Modifying LAN Server and Requester Configurations ΓòÉΓòÉΓòÉ
Because of the slower data transfer speeds over the LAN Distance connection, it
is common to experience problems with large file transfers, the XCOPY command,
session timeout, application connections, and logging on to a LAN Server.
To avoid these problems, make the following modifications for:
o every LAN Requester workstation using the LAN Distance product.
o every LAN Server that has resources you will access using the LAN Distance
product.
ΓòÉΓòÉΓòÉ 19.1.2.1. Modify NetBIOS Timers for LAN Server Workstations ΓòÉΓòÉΓòÉ
NetBIOS timers are automatically adjusted when the LAN Distance product is
installed. If the LAN Distance product is not installed on a LAN Server you
need to manually adjust the NetBIOS timers for this LAN Server through LAPS.
Values for the NetBIOS timers are discussed in Guidelines for Changing NetBIOS
Timers.
ΓòÉΓòÉΓòÉ 19.1.2.2. Modify the LAN Server SRVHEURISTICS Parameter ΓòÉΓòÉΓòÉ
1. Locate the SRVHEURISTICS parameter in the LAN Server IBMLAN.INI file.
2. Change bit 15 (marked by an ) in the SRVHEURISTICS parameter from 1 to any
number from 2 to 8. This sets the timeout value to the maximum value of
127 seconds. If this does not improve performance, turn off the timeout
value by setting bit 15 to 9.
1
(bit position counter->) 0123456789012345678
SRVHEURISTICS = 1111014111131102133
ΓòÉΓòÉΓòÉ 19.1.2.3. Increase the LAN Server SESSTIMEOUT Value ΓòÉΓòÉΓòÉ
1. Locate the SESSTIMEOUT parameter, in the LAN Server IBMLAN.INI file.
2. Increase this value from 45 to 300 seconds to help prevent a LAN server
session from timing out.
ΓòÉΓòÉΓòÉ 19.1.2.4. Modify the LAN Requester WRKHEURISTICS Parameter ΓòÉΓòÉΓòÉ
1. Locate the WRKHEURISTICS parameter in the LAN Requester IBMLAN.INI file.
2. Change bits 11, 12, and 13 (marked by an ) in the WRKHEURISTICS parameter
to 0.
1 2 3
(bit position counter->) 0123456789012345678901234567890123
WRKHEURISTICS = 1111111121300011110001011120111221
ΓòÉΓòÉΓòÉ 19.1.2.5. Increase the LAN Requester SESSTIMEOUT Value ΓòÉΓòÉΓòÉ
1. Locate the SESSTIMEOUT parameter, in the LAN Server IBMLAN.INI file.
2. Increase this value from 45 to 300 seconds to help prevent a LAN server
session from timing out.
ΓòÉΓòÉΓòÉ 19.1.3. Using DOS LAN Requester ΓòÉΓòÉΓòÉ
DOS LAN Requester.
If you are using DOS LAN Requester 3.0, install Corrective Service Diskette
(CSD) IP07003 on each LAN Requester 3.0 workstation using LAN Distance to
establish a connection to a LAN Server.
To obtain CSD IPO7003, contact IBM Software Solutions at 1-800-992-4777 (United
States), 1-800-465-2222 (Canada), or 1-800-426-1774 (International).
If you cannot obtain CSD IPO7003, edit the DOSLAN.INI file found in the DOSLAN
directory, and change the /NMS:0 parameter to /NMS:3. If this parameter does
not exist, then add /NMS:3 to any of the existing parameter lines or a new
line.
ΓòÉΓòÉΓòÉ 19.1.4. Changing DOS LAN Requester Performance Parameters ΓòÉΓòÉΓòÉ
Make the following additions and changes to performance parameters in the
DOSLAN.INI file before starting DOS LAN Requester on the LAN Distance Remote:
1. From a DOS command prompt, go to the DOSLAN directory and locate the
DOSLAN.INI file.
2. Use an ASCII editor to add the following statement to the DOSLAN.INI file:
/NMS:3 /NVS:2 /API
3. Set the /NBS (network buffer size) parameter to match the value for the
sizereqbuf parameter in the IBMLAN\IBMLAN.INI file on the IBM LAN Server.
For example, if the value for the sizereqbuf in the IBMLAN.INI file is
4096, set the /NBS parameter in the DOSLAN.INI file to:
/NBS:4K
4. Change the /BBS (big buffer size) parameter so it is 1K larger than the
/NBS parameter specified in step Changing DOS LAN Requester Performance
Parameters.
5. Change the last character in the /WKS (DLR heuristics) parameter from 0 to
1.
/WKS:111121101021211
For more information about tuning DOS LAN Requester performance parameters, see
IBM OS/2 LAN Server Network Administrator Reference Volume 2: Performance
Tuning.
ΓòÉΓòÉΓòÉ 19.2. Using the Communications Manager/2 3270 Emulation Feature ΓòÉΓòÉΓòÉ
A LAN Distance Remote can dial into a LAN and use the 3270 Emulation feature of
IBM Communication Manager/2 to access a LAN-attached host controller as shown
in Communication Manager/2 Set Up.
Communication Manager/2 Set Up
Review the following set-up considerations for using Communications Manager/2
and the 3270 emulation feature of the Communications Manager/2 product.
o The LAN Distance product supports versions 1.0 and 1.1 of the Communications
Manager/2 product.
Version 1.1 of the Communications Manager/2 product routes data frames using
general broadcast instead of the source routing frames used in version 1.0 of
the Communications Manager/2 product.
If you are running version 1.1 of the Communications Manager/2 product,
verify that the hop count defined at the LAN Distance bridge is large enough
to allow general broadcast frames to reach the receiving workstation. See
"Example 2: Using OS2PING to Verify the LAN Distance Bridge Hop Count" in
"Using OS2PING Troubleshooting and LAN Distance Bridge Configuration" in the
LAN Distance Advanced Guide.
o Install Communications Manager/2 before you install the LAN Distance product.
o Configure the 802.2 LAN protocol on the LAN Distance Remote where the
Communications Manager/2 product is installed. See Configuring Additional LAN
Protocols Required for Your LAN Applications
o Set the maximum number of network bridge hops at the LAN Distance bridge so
the data frames sent from the LAN Distance Remote running 3270 emulation can
be received at the 3745 controller. See "Setting Up Your LAN Distance Bridge
" in the LAN Distance Advanced Guide. Also, see "Example 2: Using OS2PING to
Verify the LAN Distance Bridge Hop Count" in "Using OS2PING Troubleshooting
and LAN Distance Bridge Configuration" in the LAN Distance Advanced Guide.
o The LAN Distance product and Communications Manager/2 cannot simultaneously
support ISDN. If you plan to run LAN Distance over an ISDN connection, you
cannot simultaneously run Communications Manager/2 if it is configured for
ISDN.
ΓòÉΓòÉΓòÉ 19.3. NetWare Requester for OS/2 ΓòÉΓòÉΓòÉ
The LAN Distance product supports Novell NetWare Requester for OS/2 2.0 or
later and Novell NetWare Server 2.x, 3.1x, 4.0 or later.
ΓòÉΓòÉΓòÉ 19.3.1. Installing and Configuring NetWare Requester for OS/2 ΓòÉΓòÉΓòÉ
To set up your LAN Distance Remote to use the NetWare Requester for an OS/2
product to access a NetWare Server over a LAN Distance connection:
1. Install the NetWare Requester product before installing the LAN Distance
Remote product.
2. During installation, select the appropriate network interface card driver:
o If your NetWare Server is on an Ethernet LAN, select the appropriate
network interface card driver for the Ethernet adapter.
o If your NetWare Server is on a Token-Ring LAN, select TOKEN.SYS as the
network interface card driver.
This places the ROUTE.SYS device driver statement in your CONFIG.SYS file
so the Token-Ring data frames contain the source routing information
required by the LAN Distance product.
3. Install the LAN Distance Remote product on your workstation. See Installing
the LAN Distance Product Using Diskettes.
4. Open the Settings notebook and select the LAPS tab, then select the LAPS
push button to open the LAPS Configure Workstation window shown in LAPS
Configure Workstation Window.
LAPS Configure Workstation Window
5. From the Current Configuration list box, select the LAN Distance Logical
Adapter.
6. From the Protocols list box, select the IBM NetWare Requester Support
protocol.
Select Add from the Protocols list box to add IBM NetWare Requester Support
to the protocols currently configured for the LAN Distance logical adapter.
7. In the Current Configuration field, select the LAN Distance Logical Adapter
and select Edit.
8. Record the 12-character hexadecimal address displayed in the Network
adapter address field and select Cancel.
9. In the Current Configuration field, select NetWare Requester Support and
select Edit.
The Parameters for IBM NetWare Requester Support window (Parameters for IBM
NetWare Requester Support) is displayed.
Parameters for IBM NetWare Requester Support
10. Enter the 12-character hexadecimal value you recorded earlier in the
Network adapter address field.
11. Configure the frame header support to match the type of LAN frame used by
your NetWare Server. Type Yes in the appropriate field and select OK.
If you do not know the LAN frame type, see your LAN administrator. For
Token-Ring networks, the most common LAN frame type is TOKEN-RING. For
Ethernet networks, the most common LAN frame type is ETHERNET_ 802.3.
12. To save your changes, exit LAPS, and close the Settings notebook.
Note: Before restarting your workstation to activate these changes,
complete the steps listed in Avoiding the NetWare Connection Error.
13. Restart your workstation.
ΓòÉΓòÉΓòÉ 19.3.2. Avoiding the NetWare Connection Error ΓòÉΓòÉΓòÉ
When you restart your workstation, this NetWare message is displayed:
NWD0115: Error getting connection ID (0X880F)
This error occurs because the NetWare Requester is trying to locate the NetWare
Server before a LAN Distance connection is established.
To avoid this error message:
1. Use an ASCII text editor to comment out the following statement in your
CONFIG.SYS file:
REM RUN C:\NETWARE\NWDAEMON.EXE
2. Restart your workstation and establish a connection to your LAN Distance
Connection Server. Before logging on to the NetWare Server, type the
following at an OS/2 command prompt:
DETACH C:\NETWARE\NWDAEMON.EXE
3. Each time you restart your workstation, complete step Avoiding the NetWare
Connection Error before logging on to the NetWare Server.
ΓòÉΓòÉΓòÉ 19.4. Installing and Configuring NetWare Requester for MS Windows ΓòÉΓòÉΓòÉ
You can enable NetWare Requester support during LAN Distance installation or
after you install the LAN Distance product. The NetWare Requester product must
be installed before you can enable NetWare Requester support.
To enable NetWare Requester support during LAN Distance installation:
1. When the NetWare Directory window displays, specify the fully-qualified
path for the drive and directory where the NetWare Requester product is
installed on your workstation (for example, C:\NWCLIENT).
2. When the NetWare Frame Type window displays, specify the type of frame
header used by the NetWare Server.
For Token-Ring LANs, the most common frame type is TOKEN-RING. For
Ethernet LANs, the most common frame type is ETHERNET_802.3. If you do not
know your frame type, see your LAN administrator.
To enable NetWare Requester support after the LAN Distance product is
installed, enable NetWare Requester support through the Settings notebook:
1. Open the LAN Distance group window.
2. Double-click on the Settings icon to display the Settings notebook.
3. Select the NetWare tab.
4. Select Enable NetWare Requester Support
5. In the NetWare Path field, specify the drive and directory where the
NetWare Requester product is installed on your workstation (for example,
c:\NWCLIENT).
6. In the Frame Type field, specify the type of frame header used by the
NetWare Server.
For Token-Ring LANs, the most common frame type is TOKEN-RING. For
Ethernet LANs, the most common frame type is ETHERNET_802.3. If you do not
know your frame type, see your LAN administrator.
7. Close the Settings notebook.
8. When the LAN Distance-Settings dialog box is displayed, select the Yes push
button to save your changes.
9. Shut down and restart your workstation.
ΓòÉΓòÉΓòÉ 19.4.1. Running NetWare Requester on a LAN Distance Remote ΓòÉΓòÉΓòÉ
Review the following considerations for running NetWare Requester on a LAN
Distance Remote:
ΓòÉΓòÉΓòÉ 19.4.1.1. Copying Utilities to the NetWare Requester ΓòÉΓòÉΓòÉ
Because the WAN connection cannot efficiently transfer large data files, you
should copy frequently used NetWare utilities from the NetWare Server to a
local drive on the NetWare Requester. Some frequently used utilities include
LOGON.EXE, LOGOUT.EXE, MAP.EXE and SLIST.EXE. These utilities are stored in
the SYS:PUBLIC\ directory on the NetWare Server. By running these utilities
from a local drive on the LAN Distance Remote, you avoid the delay involved in
loading large files over the LAN Distance connection.
ΓòÉΓòÉΓòÉ 19.4.1.2. Matching MaxFrame Values ΓòÉΓòÉΓòÉ
When NetWare Requester is installed on the LAN Distance Remote, the MaxFrame
parameter in the [SOCKDD_MOD] section of the WAL\PROTOCOL.INI file is set to
the default MaxFrame value (1514) for the NetWare Server. The MaxFrame values
defined for the NetWare Requester and NetWare Server should match so these
workstations send compatible frame sizes.
For the NetWare Requester, make sure the MaxFrame values in the [SOCKDD_MOD]
and [COMx] sections of the WAL\PROTOCOL.INI match. (COMx identifies the COM
port you are using for LAN Distance; for example, COM1 or COM2.)
ΓòÉΓòÉΓòÉ 19.5. Using TCP/IP for OS/2 ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 19.5.1. Setting Up TCP/IP on a LAN Workstation ΓòÉΓòÉΓòÉ
The LAN Distance product supports version 1.2.1 and later of the Using TCP/IP
for OS/2 product. You can install TCP/IP on a LAN workstation that you plan to
use as a LAN Distance Remote, or on a stand-alone LAN Distance Remote
workstation.
To set up TCP/IP on a LAN workstation that you plan to use as a LAN Distance
Remote, or on a stand-alone LAN Distance Remote that already has a LAN adapter
installed:
1. Install and configure Using TCP/IP for OS/2 using the automated tool, ICAT,
shown in TCP/IP Version 1.2.1.
TCP/IP Version 1.2.1
2. From an OS/2 command line, use the COPY command to copy these files from
\TCPIP\BIN to \IBMCOM\PROTOCOL.
TCPIP.NIF
INET.SYS
IFNDIS.SYS
3. Shut down and restart your workstation.
4. Use LAPS to configure the TCP/IP protocol for your LAN adapter.
From an OS/2 command line, go to the IBMCOM directory and type LAPS to
start the LAPS program.
LAPS Logo Window
5. From the LAPS logo window (shown in LAPS Logo Window), select the Configure
push button. From the Configure pop-up window, select the Configure LAN
transports radio button, and the Continue push button to open the Configure
Workstation window.
6. From the Configure Workstation window (shown in LAPS Configure Workstation
Window), be sure the Current Configuration list box displays your LAN
adapter. Otherwise, select your LAN adapter from the Network Adapters
field, and select the Add push button to add it to the Current
Configuration list box.
LAPS Configure Workstation Window
7. From the Protocols list box, select the IBM TCP/IP protocol. Select the
Add push button to add this protocol to your LAN adapter.
8. Select OK to exit the Configure Workstation window.
9. Select the Exit push button from the LAPS logo window to exit LAPS.
10. Shut down and restart your workstation before you complete step Setting Up
TCP/IP on a LAN Workstation.
11. Install the LAN Distance product.
12. Shut down and restart your workstation.
Note: You can use the shuttle feature to switch between the LAN-attached
configuration and the stand-alone LAN Distance Remote configuration. See Using
the Shuttle Feature for OS/2.
ΓòÉΓòÉΓòÉ 19.5.2. Setting Up TCP/IP on a LAN Distance Remote ΓòÉΓòÉΓòÉ
To set up TCP/IP on a stand-alone LAN Distance Remote that does not have a LAN
adapter installed:
1. Install the LAN Distance product.
2. Shut down and restart your workstation.
3. Install and configure TCP/IP using the automated tool, ICAT, shown in
TCP/IP Version 1.2.1.
4. From an OS/2 command line, use the COPY command to copy these files from
\TCPIP\BIN to \IBMCOM\PROTOCOL.
TCPIP.NIF
INET.SYS
IFNDIS.SYS
5. Shut down and restart your workstation.
6. Add the TCP/IP protocol to the LAN Distance Logical Adapter.
a. From the LAPS tab in the Settings notebook, select the LAPS push button
to open the LAPS Configure Workstation window (shown in LAPS Configure
Workstation Window).
You can also access the LAPS program from an OS/2 command line. Go to
the IBMCOM directory and type LAPS to start the LAPS program.
b. Steps for adding TCP/IP to the LAN Distance Logical Adapter are listed
in step Setting Up TCP/IP on a LAN Workstation through step Setting Up
TCP/IP on a LAN Workstation.
LAPS Configure Workstation Window
7. After you shut down and restart you workstation, you can verify that TCP/IP
is configured correctly. Go to the LAPS tab in the Settings notebook, and
select the LAPS push button to open the LAPS Configure Workstation window.
If TCP/IP is configured for the LAN Distance Logical Adapter it is added to
the LAN Distance Logical Adapter in the Current Configuration list box, as
shown in LAPS Configure Workstation Window.
LAPS Configure Workstation Window
ΓòÉΓòÉΓòÉ 19.6. Using TCP/IP with MS Windows Workstations ΓòÉΓòÉΓòÉ
Install TCP/IP on your MS Windows workstation before you install the LAN
Distance Remote product.
If you installed TCP/IP after you installed the LAN Distance Remote product,
you must follow these steps for TCP/IP to work:
1. Use an ASCII text editor to edit the CONFIG.SYS file, and be sure that the
TCP/IP DEVICE= statement appears after the section of LAN Distance
configuration statements. The following statement is an example TCP/IP
DEVICE= statement:
DEVICE=C:\TCPDOS\BIN\DOSTCP.SYS
2. Use an ASCII text editor and ensure that the TCP/IP section is copied from
the \LSP\PROTOCOL.INI file to the C:\WAL\PROTOCOL.INI file, where C:\WAL is
the correct drive and pathname of your WAL directory.
Change the Bindings value to SOCKDD_MOD, as shown below:
Bindings=SOCKDD_MOD
3. Use an ASCII text editor to add the following line to the AUTOEXEC.BAT
file:
CALL TCPSTART
ΓòÉΓòÉΓòÉ 19.7. Banyan VINES ΓòÉΓòÉΓòÉ
The LAN Distance product supports VINES Revision 4.11(5), 5.5x, or later, VINES
NDIS drivers.
ΓòÉΓòÉΓòÉ 19.7.1. Installing the Banyan VINES Requester ΓòÉΓòÉΓòÉ
1. Install the Banyan VINES Requester on the LAN Distance Remote using the
VCLIENT command, or copy the appropriate NDIS and VINES device drivers.
For more information on Banyan VINES installation, consult the Banyan VINES
manual Managing VINES Workstations.
2. With the OS/2 system editor, edit \CONFIG.SYS and add the following line to
the end of the file (if it does not already exist):
DEVICE=x:\VINES\DRIVERS\BN_NDIS\NDISBAN2.SYS
where x is the letter of the drive on which Banyan VINES is installed.
3. Install the LAN Distance Remote product using Basic Settings. Continue
with Steps Installing the Banyan VINES Requester and Installing the Banyan
VINES Requester before shutting down your workstation.
If you did not use Basic Settings during installation, then configure the
LAN Distance product through the Settings notebook and complete Steps
Installing the Banyan VINES Requester through Installing the Banyan VINES
Requester.
4. If the LAN Distance installation process prompts you to choose between the
LAN-attached and remote environments, choose the remote environment.
5. When the LAN Distance Remote product is installed, but before you restart
your workstation, edit the PROTOCOL.INI file in the IBMCOM directory.
Either add (or if already present, modify) the [VINES_nif] section to match
the following:
[VINES_nif]
DriverName = NDISBAN$
Bindings = PDFH_nif
6. Shut down and restart your workstation.
7. Start the LAN Distance product.
8. To start the Banyan VINES product, from an OS/2 command prompt, access the
VINES directory and enter:
BAN
ΓòÉΓòÉΓòÉ 19.7.2. Tips for Running VINES ΓòÉΓòÉΓòÉ
o Use the VINES command NEWREV to update the VINES drives on the LAN Distance
Remote instead of using the VCLIENT command.
o Install local copies of all your frequently used VINES utilities and place
these files in your VINES (or appropriate) directory. The following files
are examples of some of the recommended files to copy: cpmpact.
- LOGIN.EXE
- LOGIN.MSB
- LOGOUT.EXE
- LOGOUT.MSB
- INTLDATA.BIN
o Load Banyan VINES with the "/nl" switch and execute login locally, for
example:
BAN /nl
LOGIN
ΓòÉΓòÉΓòÉ 19.8. Special Considerations for Installing LAN Support Program ΓòÉΓòÉΓòÉ
This section describes how to install LAN Support Program (LSP) for 802.2
support after the LAN Distance Remote product is installed.
Do not use this method to install, unless:
o Your workstation does not have a LAN adapter, AND you have no adapter option
diskette available.
Note: Some versions of LSP may include an adapter option on the LSP
diskette.
o You cannot remove the LAN Distance Remote product before installing LSP.
o You installed LSP without NDIS 802.2 support.
If none of the above cases apply, follow the instructions in Special
Considerations for Running Your 802.2 Applications.
These steps were based on LSP version 1.33:
1. Insert the LSP diskette in the diskette drive, type A:DXMAID, and press
Enter to start the LSP installation program.
2. Press Enter to get past the IBM logo screen and Information panels to the
Environment Information panel.
3. From the Environment Information panel, specify the following options for
your workstation:
Configuration for this computer? Yes
Use existing configuration information? Yes
Do you have adapter option diskettes? No
Are you configuring for 2 adapters? No
Do you need 802.2 interface support? Yes
Press Enter.
4. From the Selections for Adapter Window, select:
SOCKDD_MOD
The selection is displayed in the Primary Adapter Window.
5. Press the Tab key to get to the Selections for Protocol Window.
6. From the Selections for Protocol Window, select:
IBM DOS IEEE 802.2 Protocol for NDIS (DXME0MOD.SYS)
This selection is displayed in the Protocol Window.
7. From the Selections for Protocol Window, ensure that the following protocol
is NOT selected:
IBM DOS NETBIOS (DXMT0MOD.SYS)
This selection should NOT be displayed in the Protocol Window.
8. Press PF4 to begin LSP installation and follow any further instructions.
9. Use an ASCII text editor and remove the following statement from the
AUTOEXEC.BAT file:
\LSP\NETBIND
10. Use an ASCII text editor and make the following changes to the CONFIG.SYS
file:
a. Replace the following LSP protman device statement:
DEVICE=\LSP\PROTMAN.DOC /I:\LSP
with this LAN Distance protman device statement:
DEVICE=C:\WAL\PROTMAN.DOS /I:C:\WAL
where C:\WAL is the correct drive letter and path for the WAL directory
in BOTH places in the statement.
b. Ensure that the following device statements are in the CONFIG.SYS file
in this order:
DEVICE=C:\WAL\PROTMAN.DOS /I:C:\WAL
DEVICE=\LSP\DXMA0MOD.SYS 001
DEVICE=C:\WAL\DXMJ0MOD.SYS
DEVICE=\LSP\DXME0MOD.SYS 001
where C:\WAL is the correct drive letter and path for the WAL directory.
c. The LSP install program may add a REM statement that instructs you to
remove some DEVICE= statements. Remove only the REM statement. DO NOT
remove any DEVICE= statements.
11. The LSP install program adds a section defining the 802.2 support to the
\LSP\PROTOCOL.INI file. You must copy this section from the
\LSP\PROTOCOL.INI file to the \WAL\PROTOCOL.INI file.
DO NOT COPY THE ENTIRE PROTOCOL.INI FILE. Move only the following section
defining the 802.2 support:
[DXME0_xxx]
DriverName = DXME0$
Bindings = SOCKDD_MOD
where xxx is different, depending on which LSP version you are installing.
(For example, xxx is MOD for 1.30 and NIF for 1.33.)
Copy this section to the bottom of the \WAL\PROTOCOl.INI file.
12. Shut down and restart your workstation.
ΓòÉΓòÉΓòÉ 20. Using LAN Distance Commands for OS/2 Workstations ΓòÉΓòÉΓòÉ
In addition to using LAN Distance windows, you can use LAN Distance commands to
establish connections and run your LAN programs. The LAN Distance command line
interface allows you to enter commands at an OS/2 command prompt to:
o dial out and make a connection
o hang up a call
o answer calls on your workstation
You can also create command (.CMD) files to automate your dialing tasks.
ΓòÉΓòÉΓòÉ 20.1. Before You Begin ΓòÉΓòÉΓòÉ
In order to use LAN Distance commands, you must start the LAN Distance product.
To start the LAN Distance product, do one of the following:
o Open the LAN Distance Workstations window.
o Enter LDSTART at an OS/2 command prompt.
This will start the LAN Distance product so that you can enter other LAN
Distance commands.
ΓòÉΓòÉΓòÉ 20.2. Using the LDIST DIAL Command ΓòÉΓòÉΓòÉ
Use the LDIST DIAL command to dial another LAN Distance
To dial a phone book entry named "My Server", at an OS/2 command prompt enter:
LDIST DIAL /D:"My Server"
When you have a name that contains blanks, "My Server" for example, enclose it
in double quotes as in the example above.
ΓòÉΓòÉΓòÉ 20.2.1. Status with the LDIST DIAL Command ΓòÉΓòÉΓòÉ
After you enter the LDIST DIAL command, dialing status will display. The status
displayed will look similar to the following example, depending on the type of
modem that you are using:
ATDT555-5555
RING
RING
CONNECT ECL/9600
The request has completed successfully.
You may notice a delay between receiving the modem's CONNECT message and the
completion message, while the LAN Distance product exchanges information with
the workstation you are dialing.
Once you have received the message saying that the request has completed
successfully, you can start a LAN-based application, such as IBM LAN Requester.
If you have configured your workstation for automatic redial your status will
look similar to the following example, depending on your redial configuration
and call success:
ATDT555-5555
BUSY
Waiting to redial
ATDT555-5555
RING
CONNECT ECL/9600
The request has completed successfully.
Phone book entry names are case-sensitive. If you do not enter the phone book
entry name correctly on the LDIST DIAL command, the following message is
displayed. 'EntryName' represents the name that you typed.
WCL0320E: Phone Book entry 'EntryName' does not exist.
ΓòÉΓòÉΓòÉ 20.2.2. Using User ID and Passphrase with the LDIST DIAL Command ΓòÉΓòÉΓòÉ
If you are dialing a secure LAN Distance workstation, you will be prompted to
log on after you have established a connection. You can use the userid and
passphrase options on the LDIST DIAL command to automatically log on when the
connection is established.
To have the LDIST DIAL command automatically log on a user named "UserId" with
passphrase "The passphrase", after establishing a connection, enter:
LDIST DIAL /D:"My Server" /U:UserId /P:"The passphrase"
If "UserId" is configured to be called back by the server, the status displayed
will look similar to:
ATDT555-5555
RING
RING
CONNECT ECL/9600
Waiting for callback
The request has completed successfully.
ΓòÉΓòÉΓòÉ 20.2.3. Using an Alternate Number with the LDIST DIAL Command ΓòÉΓòÉΓòÉ
You can use the number option with the LDIST DIAL command to use a different
telephone number than the one configured in your phone book entry.
The following example shows how to enter the LDIST DIAL command in order to
dial phone book entry "My Server" with a different telephone number,
"999-9999".
LDIST DIAL /D:"My Server" /N:999-9999
Using a different telephone number with the LDIST DIAL command will not change
the permanent configuration for "My Server".
ΓòÉΓòÉΓòÉ 20.3. Creating a Command File for Dialing and Starting LAN Programs ΓòÉΓòÉΓòÉ
You can use LAN Distance commands in a command (.CMD) file to automate your
routing dialing tasks.
To use a command file to dial a LAN Distance workstation and then start your
IBM LAN Requester and access a file resource on an IBM LAN Server that you now
have access to, you will need a command file that does the following:
1. Start the LAN Distance product
2. Dial the LAN Distance Connection Server
3. Log on to the LAN Distance Connection Server
4. Start IBM LAN Requester on your workstation
5. Log on to your IBM LAN Server domain
6. Access the files resource
The following command file will do this. Notice that after the LDIST DIAL
command is issued, a return code is checked to see if the connection was
established successfully. If it was successful, the IBM LAN Requester commands
are issued, otherwise, the command file is exited.
REM Start the LAN Distance product.
ldstart
REM Dial the LAN Distance Connection Server with Phone Book entry
REM "RemoteServer"
REM Use the logon option on the dial command to log on to the
REM LAN Distance Connection Server after the connection is
REM established.
ldist dial /d:RemoteServer /u:UserId /p:"The passphrase"
REM If we were unable to establish a connection exit the command file.
if errorlevel 1 goto exit
REM Otherwise, we established a connection.
REM Start our LAN Requester.
REM
net start requester
REM Logon to our LAN Server domain.
logon Fred /p:Spain
REM Access the file resource.
net use g: \\MyServer\\MyFiles
:exit
Sample Command File
This example shows how to make a connection with LAN Distance commands
and run a LAN program after the connection is established.
ΓòÉΓòÉΓòÉ 20.4. Using the LDIST HANGUP Command ΓòÉΓòÉΓòÉ
The LDIST HANGUP command allows you to stop an active connection that you have
made with the LDIST DIAL command or with the Phone Book window.
To hang up an active connection for a phone book entry named "DIAL LOCATION",
enter:
LDIST HANGUP /D:"DIAL LOCATION"
You will receive this message after the call is stopped:
The request completed successfully.
Phone book entry names are case-sensitive. If you enter the phone book entry
name incorrectly, you will receive the following message. 'EntryName'
represents the phone book entry name that you typed.
WCL0313E: A call to 'EntryName' does not exist.
ΓòÉΓòÉΓòÉ 20.5. Using the LDIST START ANSWER Command ΓòÉΓòÉΓòÉ
The LDIST START ANSWER command lets your workstation answer incoming calls.
To start answering calls on your workstation, enter the following:
LDIST START /A:PSTN_ALL_CALLS
After answer has started, you will receive this message:
The request completed successfully.
You will receive a pop-up message when an incoming call is received and a
connection is established. You can also view the status of your incoming calls
by opening the Call and port management window for your workstation.
ΓòÉΓòÉΓòÉ 20.6. Using the LDIST STOP ANSWER Command ΓòÉΓòÉΓòÉ
Use the LDIST STOP ANSWER command to stop answering calls on your workstation.
To stop answering calls on your workstation, enter the following:
LDIST STOP /A:PSTN_ALL_CALLS
After answer has stopped, you will receive this message:
The request completed successfully.
To hang up incoming calls as well as stopping answer, enter:
LDIST STOP /A:PSTN_ALL_CALLS /IMMEDIATE
Specifying the immediate option will stop any incoming calls.
ΓòÉΓòÉΓòÉ 20.7. Using the LDIST LOGON Command ΓòÉΓòÉΓòÉ
If you enabled security for your LAN Distance workstation, you must logon
before using other LDIST commands, such as LDIST DIAL. You only need to use the
LDIST LOGON command if your workstation is secure.
The following command will log a user named "UserId" with passphrase "The
passphrase" onto a workstation named "MyWorkstation":
LDIST LOGON /S:MyWorkstation /u:UserId /p:"The passphrase"
Passphrases are case-sensitive.
If you use other LDIST commands before logging on to your secure LAN Distance
workstation you will receive the following message:
WCL0312E: You are not authorized to perform the requested action.
Specifying a user ID and passphrase with the LDIST LOGON command is not
required. If you type LDIST LOGON, the LAN Distance Logon window is displayed.
Note: The keyboard lights for the Caps Lock, Scroll Lock and Num Lock may fail
to light up if you use one of these keys to enter user ID and passphrase
information in the LAN Distance Logon window. This problem is only temporary.
When the LAN Distance Logon window is closed, these lights will function
normally.
ΓòÉΓòÉΓòÉ 20.8. Using the LDIST LOGOFF Command ΓòÉΓòÉΓòÉ
Enter the following to log a user named "UserId" off of a workstation named
"MyWorkstation".
LDIST LOGOFF /S:MyWorkstation /u:UserId
If you log off a workstation that you have dialed, the connection will remain
active.
ΓòÉΓòÉΓòÉ 21. What to Do If Your Modem Is Not Listed ΓòÉΓòÉΓòÉ
If one of the following errors occurs when you establish a connection with the
modem selection you made in the Basic Settings Modem Type:
o spontaneous disconnects
o error message:
WCL0221E: LAN Distance could not initialize the modem. Select Help for
additional information.
o error message:
WCL0336E: The called workstation did not respond to requests to
exchange information with the LAN Distance product. The call has been
disconnected.
This problem occurs when:
- (most likely) A modem configuration or cabling problem exists on one
of the workstations.
- The machines are not configured the same for the "Connect to a
non-LAN Distance Destination" option.
try to configure your modem using either of two alternative methods:
o Select another listed modem type that will work for your modem. Complete the
steps in Using a Listed Modem Type to Configure Your Asynchronous Modem.
o Create a PIF file for your modem using the PIF file of a listed modem as a
template. See "Creating a New Modem String for a Modem Not in the List," in
the LAN Distance Advanced Guide. Use this configuration method only after
you try using several listed modem types to configure your modem.
If you cannot establish a connection with the newly created .PIF file, use
the Port/Modem Utility provided with the OS/2 LAN Distance product. To access
this applet:
1. Copy the following files from LAN Distance Diskette 3 into the \WAL
subdirectory:
CFMODEM.EXE
CFMODEM.HLP
TESTSTR.EXE
2. Copy the following file from LAN Distance Diskette 3 into the \WAL\DLL
subdirectory:
CFSHDATA.DLL
3. Type CFMODEM at an OS/2 command prompt. Follow the instructions to
build a new modem string and to test the modem string for your modem.
If these configuration methods do not work, contact your designated support
organization.
ΓòÉΓòÉΓòÉ 21.1. Using a Listed Modem Type to Configure Your Asynchronous Modem ΓòÉΓòÉΓòÉ
Repeat these steps until you find a listed modem type with configuration values
that you can use to set up your modem.
1. Open the Settings notebook and select the Modems tab.
2. The modem type you selected in the Basic Settings Modem Type field is
displayed in the Assignments for modem types list.
Delete this modem from the Assignments for modem types list.
3. Select the Assign push button to configure your unlisted modem using a
listed modem type.
4. The Available modem types field, shown in Available Modem Types Field,
lists the modems that the LAN Distance product is set up to support. Click
on the down arrow to display all supported modem types.
page=no.
Available Modem Types Field
5. Try the following strategies, as listed, to select a similar modem type
from the Available modem types field:
o Select a modem made by the same manufacturer.
o If your modem is compatible with a listed modem type, select the
compatible modem type.
o Select the Asynchronous Switched Connection Modem type.
o Select any remaining listed modem type.
After you select a modem type, select OK to continue modem configuration.
6. From the Ports tab, select Add to continue.
7. Select Switched for the type of phone line. You may also specify a Phone
Number for the modem. Select OK to continue.
8. From the Available ports field, select the COM port you configured through
Basic Settings to assign it to the modem type you selected in step 5.
Select OK.
9. Close the Settings notebook, stop active applications, shut down and
restart your workstation.
10. Dialing Out to Establish a Connection describes how to establish a
connection.
Your modem is successfully configured if you can establish a connection,
send and receive data, and disconnect the modem.
11. If you cannot communicate using your modem, delete the modem type you just
tried from the Assignments for modem types field on the Modems tab, then
try another listed modem type.
12. Repeat steps 3 - 10 until your modem can communicate, or until you try all
the listed modem types.
Note: Software, modems, and other hardware can cause connection problems, see
"Troubleshooting Tips for Some Common Problems," in LAN Distance Advanced Guide
for troubleshooting information.
ΓòÉΓòÉΓòÉ 22. Glossary ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.1. A ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.1.1. ad hoc conferencing ΓòÉΓòÉΓòÉ
ad hoc conferencing
A dynamic environment in which two or more LAN Distance workstations dial in to
a common LAN Distance workstation (the hub) and conference with each other
across the virtual LAN connections. See also hub.
ΓòÉΓòÉΓòÉ 22.1.2. administrator ΓòÉΓòÉΓòÉ
administrator
See LAN Distance administrator.
ΓòÉΓòÉΓòÉ 22.1.3. Advanced Network Driver Interface Specification (ANDIS) ΓòÉΓòÉΓòÉ
Advanced Network Driver Interface Specification (ANDIS)
An upgraded version of the Network Driver Interface Specification (NDIS). It
is the interface between the LAN Distance logical adapter and the WAN adapter
MAC.
ΓòÉΓòÉΓòÉ 22.1.4. Advanced Peer-to-Peer Networking (APPN) ΓòÉΓòÉΓòÉ
Advanced Peer-to-Peer Networking (APPN)
An implementation of the Systems Network Architecture (SNA) LU 6.2 protocol
that allows interconnected systems to communicate and share the processing of
programs. APPN conforms to the IEEE 802.2 interface; applications using it are
supported by the LAN Distance product.
ΓòÉΓòÉΓòÉ 22.1.5. Advanced Program-to-Program Communications (APPC) ΓòÉΓòÉΓòÉ
Advanced Program-to-Program Communications (APPC)
An implementation of the Systems Network Architecture (SNA) LU 6.2 protocol
that allows interconnected systems to communicate and share the processing of
programs. APPC conforms to the IEEE 802.2 interface; applications using it are
supported by the LAN Distance product.
ΓòÉΓòÉΓòÉ 22.1.6. alert ΓòÉΓòÉΓòÉ
alert
A message sent to a system services control point to report that an error
occurred that requires operator intervention or attention. For the LAN
Distance product, alerts for communications errors are generated through
FFST/2. FFST/2 can be configured to forward the alerts to NetView or central
LAN management point.
ΓòÉΓòÉΓòÉ 22.1.7. ANDIS ΓòÉΓòÉΓòÉ
ANDIS
See Advanced Network Driver Interface Specification (ANDIS).
ΓòÉΓòÉΓòÉ 22.1.8. answer ΓòÉΓòÉΓòÉ
answer
To acknowledge an attempt from a remote workstation to establish a LAN Distance
connection. Answering a call does not imply a successful connection. The
dialing and answering workstations must negotiate to establish the connection.
ΓòÉΓòÉΓòÉ 22.1.9. answer criteria ΓòÉΓòÉΓòÉ
answer criteria
The set of specifications that enables a particular Answer Mode.
ΓòÉΓòÉΓòÉ 22.1.10. answer mode ΓòÉΓòÉΓòÉ
answer mode
A workstation state that allows incoming calls to be acknowledged, depending on
their conformity to a defined set of specifications. See also answer criteria.
Multiple answer modes (answering states based on different call acceptance
specifications) can be configured for a workstation.
ΓòÉΓòÉΓòÉ 22.1.11. APPC ΓòÉΓòÉΓòÉ
APPC
See Advanced Program-to-Program Communications (APPC).
ΓòÉΓòÉΓòÉ 22.1.12. APPN ΓòÉΓòÉΓòÉ
APPN
See Advanced Peer-to-Peer Networking (APPN).
ΓòÉΓòÉΓòÉ 22.1.13. ARTIC ΓòÉΓòÉΓòÉ
ARTIC
An IBM WAN adapter that provides asynchronous and synchronous transmission
support for up to 8 communication ports.
ΓòÉΓòÉΓòÉ 22.1.14. asynchronous transmission ΓòÉΓòÉΓòÉ
asynchronous transmission
A type of data communication in which transmission of a character or a block of
characters can begin at any time, but in which the bits that represent the
character or block have equal time duration.
ΓòÉΓòÉΓòÉ 22.1.15. audit log ΓòÉΓòÉΓòÉ
audit log
A record of all LAN Distance connection attempts, successful LAN Distance
connection activity, link statistics, and security events at a LAN Distance
Remote or LAN Distance Connection Server.
ΓòÉΓòÉΓòÉ 22.2. B ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.2.1. Basic Settings ΓòÉΓòÉΓòÉ
Basic Settings
A highly guided, simplified path for installing and configuring a LAN Distance
Remote. Basic Settings supports asynchronous and ISDN switched line connection
types.
ΓòÉΓòÉΓòÉ 22.2.2. binding ΓòÉΓòÉΓòÉ
binding
The configurable association between two layers of communications software. Two
bindings are required by the LAN Distance product. First, the LAN protocol must
be bound to the LAN Distance logical adapter. Second, the LAN Distance logical
adapter must be bound to the WAN adapter MAC.
ΓòÉΓòÉΓòÉ 22.2.3. bridge ΓòÉΓòÉΓòÉ
bridge
A functional unit that connects two local area networks (LANs) that use the
same logical link control protocol but may use different medium access control
protocols.
ΓòÉΓòÉΓòÉ 22.2.4. broadcast message ΓòÉΓòÉΓòÉ
broadcast message
Synonymous with broadcast frame. A message that is transmitted to all
destinations on a local area network (LAN).
ΓòÉΓòÉΓòÉ 22.3. C ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.3.1. callback ΓòÉΓòÉΓòÉ
callback
A feature, active during LAN Distance connection establishment, in which the
answering workstation re-initiates the connection by placing a call back to the
dialing workstation. The original dialing workstation must be a LAN Distance
Remote. This feature provides a level of security and can be used to manage
telephone charges by placing call control at the answering workstation.
ΓòÉΓòÉΓòÉ 22.3.2. callback type ΓòÉΓòÉΓòÉ
callback type
The method, fixed or variable, of obtaining the callback telephone number. It
determines whether the telephone number is already configured or if it is
supplied by the dialing user at connection time.
ΓòÉΓòÉΓòÉ 22.3.3. carbon copy ΓòÉΓòÉΓòÉ
carbon copy
A remote access technology in which keyboard and screen data are routed between
two workstations across a WAN connection. This technology is supported by LAN
Distance if it is NDIS enabled; however, it is not used by the LAN Distance
product.
ΓòÉΓòÉΓòÉ 22.3.4. CID ΓòÉΓòÉΓòÉ
CID
See Configuration, Installation and Distribution (CID).
ΓòÉΓòÉΓòÉ 22.3.5. communication port ΓòÉΓòÉΓòÉ
communication port
An access point for data to enter or exit a communication device. For example,
a serial port to which a modem is attached is a communication port.
ΓòÉΓòÉΓòÉ 22.3.6. Configuration, Installation and Distribution (CID) ΓòÉΓòÉΓòÉ
Configuration, Installation and Distribution (CID)
An IBM architecture for standard LAN installation and configuration operations.
The portions of CID implemented by the LAN Distance product are (1)
installation from a redirected drive and (2) use of a response file.
ΓòÉΓòÉΓòÉ 22.4. D ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.4.1. device driver replacement ΓòÉΓòÉΓòÉ
device driver replacement
The technology, implemented by the LAN Distance product, in which a LAN adapter
is replaced by a WAN adapter MAC to transmit data across wide area connections.
The LAN Distance logical adapter and WAN adapter MAC send and receive LAN data
frames across a LAN Distance connection. This technology enables transparent
support of LAN applications and LAN protocols.
ΓòÉΓòÉΓòÉ 22.4.2. dial ΓòÉΓòÉΓòÉ
dial
To initiate a LAN Distance connection by placing a call to a target location.
This term applies to connections over switched and nonswitched lines, even
though the act of dialing a telephone number does not actually apply to
nonswitched lines.
ΓòÉΓòÉΓòÉ 22.4.3. dial-in ΓòÉΓòÉΓòÉ
dial-in
The action of establishing a LAN Distance connection to a LAN, by dialing a LAN
Distance Connection Server on the LAN.
ΓòÉΓòÉΓòÉ 22.4.4. dial-in port ΓòÉΓòÉΓòÉ
dial-in port
A LAN Distance communication port designated by the LAN Distance product to
answer incoming calls.
ΓòÉΓòÉΓòÉ 22.4.5. Dial Services Interface (DSI) ΓòÉΓòÉΓòÉ
Dial Services Interface (DSI)
A program interface to the dialing services of the LAN Distance product.
ΓòÉΓòÉΓòÉ 22.4.6. directed frame ΓòÉΓòÉΓòÉ
directed frame
A data frame that is intended to be delivered to a specific location and thus
contains the address of its destination.
ΓòÉΓòÉΓòÉ 22.4.7. duplicate address checker ΓòÉΓòÉΓòÉ
duplicate address checker
A LAN Distance feature to ensure that workstations dialing in to a LAN have a
unique LAN adapter address.
ΓòÉΓòÉΓòÉ 22.5. E ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.5.1. error log ΓòÉΓòÉΓòÉ
error log
A workstation log of error information, for use in problem determination by
your designated support organization. The LAN Distance product uses FFST/2 to
record error log information.
ΓòÉΓòÉΓòÉ 22.5.2. error message log ΓòÉΓòÉΓòÉ
error message log
A workstation file containing a copy of all error and warning messages
generated at that workstation. It might also contain Error Reports. (See also
Error Report).
ΓòÉΓòÉΓòÉ 22.5.3. error report ΓòÉΓòÉΓòÉ
error report
An error message generated by a remote LAN Distance Connection Server, sent to
a LAN Distance administrator as a pop-up, and written to the LAN Distance
administrator's error message log.
ΓòÉΓòÉΓòÉ 22.5.4. Ethernet ΓòÉΓòÉΓòÉ
Ethernet
A 10-megabit baseband local area network that allows multiple stations to
access the transmission medium without prior coordination. It avoids contention
by using carrier sense and deference, and resolves contention by using
collision detection and transmission.
ΓòÉΓòÉΓòÉ 22.6. F ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.6.1. filtering ΓòÉΓòÉΓòÉ
filtering
Synonymous with traffic filtering. A LAN Distance feature that limits the LAN
traffic that flows across a LAN Distance connection to only the data frames
that apply to the participating workstations. Filtering criteria are
configurable and can be based on the type of LAN data frame being transmitted
and the source or destination of that data.
ΓòÉΓòÉΓòÉ 22.6.2. First Failure Support Technology/2 (FFST/2) ΓòÉΓòÉΓòÉ
First Failure Support Technology/2 (FFST/2)
A software product that provides a set of Application Program Interfaces for
OS/2 programs to invoke for aid in problem determination. Functions provided
by FFST/2 include logging and displaying errors, formatting and routing alerts,
and generating data dumps. FFST/2 is included in the LAN Distance product
packages.
ΓòÉΓòÉΓòÉ 22.6.3. fixed callback ΓòÉΓòÉΓòÉ
fixed callback
A type of callback in which the telephone number to be dialed is always the
same.
ΓòÉΓòÉΓòÉ 22.6.4. frame ΓòÉΓòÉΓòÉ
frame
A data structure consisting of fields defined by a protocol for the
transmission of user and control data.
ΓòÉΓòÉΓòÉ 22.6.5. functional address ΓòÉΓòÉΓòÉ
functional address
A Token-Ring destination address used to identify widely-used functions. It is
typically used to specify the destination for a broadcast message.
ΓòÉΓòÉΓòÉ 22.7. G ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.8. H ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.8.1. hang up ΓòÉΓòÉΓòÉ
hang up
To end a LAN Distance connection.
ΓòÉΓòÉΓòÉ 22.8.2. homologation ΓòÉΓòÉΓòÉ
homologation
The enforcement of certain country or network requirements regarding the use of
telephone circuits and other networks by computers. The LAN Distance product
requires the modems that it uses to be homologated.
ΓòÉΓòÉΓòÉ 22.8.3. hub ΓòÉΓòÉΓòÉ
hub
A LAN Distance Connection Server workstation acting as an intermediary for ad
hoc conferencing among multiple LAN Distance workstations. The hub workstation
typically runs LAN application server software, such as OS/2 LAN Server, to
manage communications among the conferencing workstations. The hub must be an
OS/2 workstation.
ΓòÉΓòÉΓòÉ 22.9. I ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.9.1. IBM LAN Distance Remote ΓòÉΓòÉΓòÉ
IBM LAN Distance Remote
The IBM product that provides security and remote LAN access for individual
workstations to other workstations and LANs.
ΓòÉΓòÉΓòÉ 22.9.2. IBM LAN Distance Connection Server ΓòÉΓòÉΓòÉ
IBM LAN Distance Connection Server
The IBM product that provides security and routing capabilities to allow remote
workstations to access LAN resources.
ΓòÉΓòÉΓòÉ 22.9.3. IEEE 802.2 ΓòÉΓòÉΓòÉ
IEEE 802.2
A standard defined by the Institute of Electrical and Electronics Engineers
(IEEE) for logical link control within a local area network. IEEE 802.2 is one
of the standards supported by the LAN Distance product for LAN protocol
software.
ΓòÉΓòÉΓòÉ 22.9.4. IEEE 802.5 ΓòÉΓòÉΓòÉ
IEEE 802.5
A standard defined by the Institute of Electrical and Electronics Engineers
(IEEE) for framing and error detection within a Token-Ring network. IEEE 802.5
is the framing standard used by the LAN Distance logical adapter.
ΓòÉΓòÉΓòÉ 22.9.5. integrated services digital network (ISDN) ΓòÉΓòÉΓòÉ
integrated services digital network (ISDN)
A digital end-to-end telecommunication network that supports multiple services
including, but not limited to, voice and data.
ΓòÉΓòÉΓòÉ 22.9.6. ISDN ΓòÉΓòÉΓòÉ
ISDN
See integrated services digital network (ISDN).
ΓòÉΓòÉΓòÉ 22.10. J ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.11. K ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.12. L ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.12.1. LAN ΓòÉΓòÉΓòÉ
LAN
See local area network (LAN).
ΓòÉΓòÉΓòÉ 22.12.2. LAN adapter ΓòÉΓòÉΓòÉ
LAN adapter
A card which is installed on a workstation and is used to attach the
workstation to a local area network (LAN).
ΓòÉΓòÉΓòÉ 22.12.3. LAN Adapter Protocol Support (LAPS) ΓòÉΓòÉΓòÉ
LAN Adapter Protocol Support (LAPS)
LAN networking software that allows selection and binding of LAN protocols to
LAN adapters. It is required by and shipped with the LAN Distance product.
ΓòÉΓòÉΓòÉ 22.12.4. LAN application ΓòÉΓòÉΓòÉ
LAN application
A program that shares data and resources among workstations through the
transmission of data across a local area network (LAN). LAN applications must
adhere to an NDIS-compliant LAN protocol, such as NetBIOS IEEE 802.2, or
TCP/IP, to be supported by the LAN Distance product.
ΓòÉΓòÉΓòÉ 22.12.5. LAN workstation ΓòÉΓòÉΓòÉ
LAN workstation
A workstation physically residing on a local area network (LAN). Contrast to a
stand-alone workstation.
ΓòÉΓòÉΓòÉ 22.12.6. LAN Distance administrator ΓòÉΓòÉΓòÉ
LAN Distance administrator
A user-type designation for the user who performs LAN Distance system
management tasks. See user and see also LAN Distance security administrator for
the other user types defined by the LAN Distance product.
ΓòÉΓòÉΓòÉ 22.12.7. LAN Distance bridge ΓòÉΓòÉΓòÉ
LAN Distance bridge
A bridge established by a LAN Distance Connection Server for the wide area
connections to its LAN. The LAN Distance bridge routes and filters LAN traffic
for the LAN Distance wide area network.
ΓòÉΓòÉΓòÉ 22.12.8. LAN Distance Connection Server ΓòÉΓòÉΓòÉ
LAN Distance Connection Server
See IBM LAN Distance Connection Server.
ΓòÉΓòÉΓòÉ 22.12.9. LAN Distance Connection Server ΓòÉΓòÉΓòÉ
LAN Distance Connection Server
The LAN Distance connection agent for a LAN. It is the location of central
answering, system management, and security resources for the LAN Distance
connection to a LAN.
ΓòÉΓòÉΓòÉ 22.12.10. LAN Distance Remote ΓòÉΓòÉΓòÉ
LAN Distance Remote
See IBM LAN Distance Remote.
ΓòÉΓòÉΓòÉ 22.12.11. LAN Distance Remote ΓòÉΓòÉΓòÉ
LAN Distance Remote
A workstation on which the LAN Distance Remote product is installed. It can
establish LAN Distance connections to or from a LAN Distance Remote and a LAN
Distance Connection Server.
ΓòÉΓòÉΓòÉ 22.12.12. LAN Distance security administrator ΓòÉΓòÉΓòÉ
LAN Distance security administrator
A user-type designation for the user who manages LAN Distance security,
including configuration of the security policy and administration of the user
account database. See user and see also LAN Distance administrator for the
other user types defined by the LAN Distance product.
ΓòÉΓòÉΓòÉ 22.12.13. LAN Distance system ΓòÉΓòÉΓòÉ
LAN Distance system
The set of workstations that a LAN Distance administrator supports. It
includes the workstations on which the LAN Distance product is installed and
all the workstations that can participate in LAN Distance wide area
connections.
ΓòÉΓòÉΓòÉ 22.12.14. LAN Distance wide area network ΓòÉΓòÉΓòÉ
LAN Distance wide area network
The set of workstations that can communicate with each other over their
interrelated LAN Distance connections. In the remote-to-remote environment, it
includes the entire virtual LAN. In the remote-to-LAN environment, it includes
remote workstations, the LAN Distance Connection Server to which they are
connected, and the LAN-attached workstations that are allowed to communicate
with the remote workstations.
ΓòÉΓòÉΓòÉ 22.12.15. LAN protocol ΓòÉΓòÉΓòÉ
LAN protocol
The protocol used for information transfer among the workstations attached on a
LAN. The LAN protocols supported by the LAN Distance product must be
NDIS-compliant (for example, IEEE 802.2, NetBIOS, and TCP/IP).
ΓòÉΓòÉΓòÉ 22.12.16. LAN resource ΓòÉΓòÉΓòÉ
LAN resource
A directory or file resource, printer, or serial device that is physically
attached to a LAN and is managed by the LAN's administrative software.
ΓòÉΓòÉΓòÉ 22.12.17. LAN Requester ΓòÉΓòÉΓòÉ
LAN Requester
A component of the OS/2 program that allows users to access shared network
resources made available by an OS/2 LAN Server. Using the client/server model,
the LAN Requester component would reside on the client workstation.
ΓòÉΓòÉΓòÉ 22.12.18. LAN Server ΓòÉΓòÉΓòÉ
LAN Server
See OS/2 LAN Server.
ΓòÉΓòÉΓòÉ 22.12.19. LAN transport protocol ΓòÉΓòÉΓòÉ
LAN transport protocol
Synonymous with LAN protocol.
ΓòÉΓòÉΓòÉ 22.12.20. LAPS ΓòÉΓòÉΓòÉ
LAPS
See LAN Adapter Protocol Support (LAPS).
ΓòÉΓòÉΓòÉ 22.12.21. leased line ΓòÉΓòÉΓòÉ
leased line
A telecommunications line on which connections do not have to be established by
dialing a telephone number; the line is reserved for use between specific
locations and is activated directly. See also nonswitched line.
ΓòÉΓòÉΓòÉ 22.12.22. line ΓòÉΓòÉΓòÉ
line
The physical medium, such as a telephone wire, used to transmit data.
ΓòÉΓòÉΓòÉ 22.12.23. local area network (LAN) ΓòÉΓòÉΓòÉ
local area network (LAN)
A network comprising two or more units physically connected for the purpose of
local resource sharing. The network is generally limited to a moderate-sized
geographic area, such as a single office building or campus.
ΓòÉΓòÉΓòÉ 22.12.24. logical adapter network address ΓòÉΓòÉΓòÉ
logical adapter network address
A unique identifier for a workstation or resource participating in a LAN
Distance wide area network. The LAN Distance product uses this address to
accomplish LAN traffic filtering and routing.
ΓòÉΓòÉΓòÉ 22.13. M ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.13.1. media access control (MAC) ΓòÉΓòÉΓòÉ
media access control (MAC)
The communications software that controls the interface between the LAN
protocol software and the workstation's LAN or WAN adapter.
ΓòÉΓòÉΓòÉ 22.13.2. modem (modulator/demodulator) ΓòÉΓòÉΓòÉ
modem (modulator/demodulator)
A device that converts digital data to an analog signal that can be transmitted
on a telecommunication line, and converts the analog signal received to digital
data.
ΓòÉΓòÉΓòÉ 22.13.3. modem type ΓòÉΓòÉΓòÉ
modem type
An item in the LAN Distance product used to configure a modem. A modem type can
be synchronous or asynchronous. Many modem types are listed as modem brand
names.
ΓòÉΓòÉΓòÉ 22.14. N ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.14.1. NDIS ΓòÉΓòÉΓòÉ
NDIS
See Network Driver Interface Specification (NDIS).
ΓòÉΓòÉΓòÉ 22.14.2. NetBIOS ΓòÉΓòÉΓòÉ
NetBIOS
A LAN protocol that provides application program interfaces to the network
adapter for establishing sessions and transmitting data. It is one of the LAN
protocols supported by the LAN Distance product.
ΓòÉΓòÉΓòÉ 22.14.3. NetBIOS name ΓòÉΓòÉΓòÉ
NetBIOS name
The name by which a node is known. It is used as the basis for communication
between application programs.
ΓòÉΓòÉΓòÉ 22.14.4. NetView/2 ΓòÉΓòÉΓòÉ
NetView/2
An OS/2 program product for central LAN management. Configuring the interface
between FFST/2 and NetView/2 provides NetView/2 access to LAN Distance
information.
ΓòÉΓòÉΓòÉ 22.14.5. Network Driver Interface Specification (NDIS) ΓòÉΓòÉΓòÉ
Network Driver Interface Specification (NDIS)
An industry standard interface between network adapter software and LAN
transport protocols. The interface into the LAN Distance logical network
adapter is compliant with NDIS, and supports any LAN protocol that is also
compliant, such as IEEE 802.2, NetBIOS, and TCP/IP.
ΓòÉΓòÉΓòÉ 22.14.6. Network Transport Services/2 (NTS/2) ΓòÉΓòÉΓòÉ
Network Transport Services/2 (NTS/2)
A software product that includes the particular LAN networking software, LAPS,
required by the LAN Distance product. It also includes support for the
Configuration, Installation and Distribution (CID) facility.
ΓòÉΓòÉΓòÉ 22.14.7. non-directed frame ΓòÉΓòÉΓòÉ
non-directed frame
A data frame whose destination is not limited to a single location. Its
destination is specified as a functional address, group address, or All
Stations.
ΓòÉΓòÉΓòÉ 22.14.8. nonswitched line ΓòÉΓòÉΓòÉ
nonswitched line
A telecommunications line on which connections do not have to be established by
dialing a telephone number; that is, the line is reserved for use between
specific locations and is activated directly. Contrast with switched line. For
PSTN connections, nonswitched lines are referred to as leased lines.
ΓòÉΓòÉΓòÉ 22.14.9. notebook ΓòÉΓòÉΓòÉ
notebook
A graphical representation that resembles a bound notebook containing pages
separated into sections by tabbed dividers. A user can turn the pages of a
notebook to move from one section to another.
ΓòÉΓòÉΓòÉ 22.15. O ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.15.1. object ΓòÉΓòÉΓòÉ
object
A visual component of a user interface on which an action can be performed.
ΓòÉΓòÉΓòÉ 22.15.2. object-oriented user interface ΓòÉΓòÉΓòÉ
object-oriented user interface
A type of user interface that implements the object-action paradigm of
selecting an object and then selecting an action to apply to that object.
ΓòÉΓòÉΓòÉ 22.15.3. OEM ΓòÉΓòÉΓòÉ
OEM
Original Equipment Manufacturer. The designation applied to hardware and
software developed by a company other than IBM.
ΓòÉΓòÉΓòÉ 22.15.4. OS/2 LAN Server ΓòÉΓòÉΓòÉ
OS/2 LAN Server
A program that allows resources to be shared with other computers on a local
area network (LAN). It contains both the client and server components.
ΓòÉΓòÉΓòÉ 22.16. P ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.16.1. passphrase ΓòÉΓòÉΓòÉ
passphrase
A secret string of characters known to a computer system and a particular user
who must specify it to gain access to the system and its data. A passphrase
allows imbedded spaces and mixed case characters to support more flexible and
complex combinations than a password allows. LAN Distance security relies on a
user ID to identify a user and can optionally require a passphrase to
authenticate that user.
ΓòÉΓòÉΓòÉ 22.16.2. personal account ΓòÉΓòÉΓòÉ
personal account
An entry in the user account database that contains security specifications for
a particular user. A Personal Account is the subset of fields that the
specific user can alter, the passphrase and user description. The complete set
is managed by the LAN Distance security administrator.
ΓòÉΓòÉΓòÉ 22.16.3. phone book ΓòÉΓòÉΓòÉ
phone book
The LAN Distance product contains two type of phone books. Each entry in the
phone book notebook under the Settings tab contains all information needed for
dialing a particular workstation. Open as leads to a phone book used to dial
other LAN Distance workstations.
ΓòÉΓòÉΓòÉ 22.16.4. phone book entry ΓòÉΓòÉΓòÉ
phone book entry
A single named object within the phone book settings notebook.
ΓòÉΓòÉΓòÉ 22.16.5. port ΓòÉΓòÉΓòÉ
port
See communication port.
ΓòÉΓòÉΓòÉ 22.16.6. privilege ΓòÉΓòÉΓòÉ
privilege
A security designation that entitles a user to perform a set of tasks.
Privileges are based on the user-type definitions of user, LAN Distance
administrator, and LAN Distance security administrator, and are assigned within
a user account.
ΓòÉΓòÉΓòÉ 22.16.7. protocol ΓòÉΓòÉΓòÉ
protocol
The set of rules governing the operation of functional units of a communication
system that must be followed for communication to take place.
ΓòÉΓòÉΓòÉ 22.16.8. protocol stack ΓòÉΓòÉΓòÉ
protocol stack
Within the LAN Distance product, a synonym for LAN protocol.
ΓòÉΓòÉΓòÉ 22.16.9. protocol stack timer ΓòÉΓòÉΓòÉ
protocol stack timer
A configurable parameter associated with the operation of a LAN protocol.
ΓòÉΓòÉΓòÉ 22.16.10. PSTN ΓòÉΓòÉΓòÉ
PSTN
See Public Switched Telephone Network (PSTN).
ΓòÉΓòÉΓòÉ 22.16.11. Public Switched Telephone Network (PSTN) ΓòÉΓòÉΓòÉ
Public Switched Telephone Network (PSTN)
Any switching system that provides a circuit switched to many customers. Four
types exist in the USA: Telex, TWS, telephone, and Broadband Exchange. Within
the LAN Distance product, PSTN encompasses asynchronous and synchronous
connections.
ΓòÉΓòÉΓòÉ 22.17. Q ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.18. R ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.18.1. README ΓòÉΓòÉΓòÉ
README
A file included in a software package to document very recent information. It
supplements formal product documentation and ensures that information is
up-to-date when a product is shipped to users. In the LAN Distance product, the
file is located in the /WAL subdirectory.
ΓòÉΓòÉΓòÉ 22.18.2. redirected drive ΓòÉΓòÉΓòÉ
redirected drive
A LAN feature allowing one LAN-attached workstation to access a drive on
another LAN-attached workstation using a simple drive designation uniquely
equated to the target workstation's drive.
ΓòÉΓòÉΓòÉ 22.18.3. remote-to-LAN ΓòÉΓòÉΓòÉ
remote-to-LAN
A LAN Distance environment in which a standalone workstation connects to a LAN
and accesses its workstations and resources. The standalone workstation
connects to the LAN by dialing a LAN Distance Connection Server on the LAN. See
also dial-in.
ΓòÉΓòÉΓòÉ 22.18.4. remote-to-remote ΓòÉΓòÉΓòÉ
remote-to-remote
A LAN Distance environment in which two workstations are connected to form a
LAN Distance wide area network. Each workstation can access the other's
resources and LAN applications over the LAN Distance connection. See also
virtual LAN.
ΓòÉΓòÉΓòÉ 22.18.5. response file ΓòÉΓòÉΓòÉ
response file
A CID file used to supply answers to an installation program's prompts. These
answers are the responses users specify during a window-driven installation.
ΓòÉΓòÉΓòÉ 22.18.6. ring ΓòÉΓòÉΓòÉ
ring
A network configuration in which devices are connected by unidirectional
transmission links to form a closed path.
ΓòÉΓòÉΓòÉ 22.19. S ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.19.1. SAP ΓòÉΓòÉΓòÉ
SAP
Service Access Point. A logical protocol identifier that allows a system to
route data between a remote device and the appropriate communications support.
For example, the SAP value for NetBIOS is hex F0.
ΓòÉΓòÉΓòÉ 22.19.2. secure LAN Distance workstation ΓòÉΓòÉΓòÉ
secure LAN Distance workstation
A LAN Distance workstation on which LAN Distance security is enabled. LAN
Distance security helps to prevent unauthorized users from accessing the LAN
Distance workstation. See also security policy.
ΓòÉΓòÉΓòÉ 22.19.3. Security Administrator ΓòÉΓòÉΓòÉ
Security Administrator
See LAN Distance security administrator.
ΓòÉΓòÉΓòÉ 22.19.4. security policy ΓòÉΓòÉΓòÉ
security policy
The set of rules that can be customized to enable the security requirements of
a particular user environment. Examples of configurable items include Maximum
allowed logon attempts and passphrase durations.
ΓòÉΓòÉΓòÉ 22.19.5. Settings ΓòÉΓòÉΓòÉ
Settings
Also Settings Notebook. The object within the LAN Distance product through
which configuration tasks are performed.
ΓòÉΓòÉΓòÉ 22.19.6. shuttle ΓòÉΓòÉΓòÉ
shuttle
The LAN Distance feature that allows a workstation to switch between a
stand-alone LAN Distance Remote and a Non-LAN Distance LAN-attached
workstation. It is associated with physically moving the workstation on and
off the LAN.
ΓòÉΓòÉΓòÉ 22.19.7. stand-alone workstation ΓòÉΓòÉΓòÉ
stand-alone workstation
A workstation that runs application programs independently of another system,
and is not LAN-attached. Contrast to LAN workstation.
ΓòÉΓòÉΓòÉ 22.19.8. switched line ΓòÉΓòÉΓòÉ
switched line
A telecommunication line in which the connection is established by dialing.
Contrast with nonswitched line. This terms applies to both PSTN and ISDN
connections.
ΓòÉΓòÉΓòÉ 22.19.9. switched link ΓòÉΓòÉΓòÉ
switched link
A wide area connection between workstations.
ΓòÉΓòÉΓòÉ 22.19.10. synchronous transmission ΓòÉΓòÉΓòÉ
synchronous transmission
A type of data communication in which the sending and receiving of characters
are controlled by timing signals.
ΓòÉΓòÉΓòÉ 22.20. T ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.20.1. TCP/IP ΓòÉΓòÉΓòÉ
TCP/IP
Transport Control Protocol/Internet Protocol. An NDIS-compliant communications
protocol that integrates unlike computer systems and networks. An
NDIS-compliant version of TCP/IP for OS/2 is one of the LAN protocols supported
by the LAN Distance product.
ΓòÉΓòÉΓòÉ 22.20.2. Token-Ring ΓòÉΓòÉΓòÉ
Token-Ring
A LAN with a ring topology that passes tokens from one attaching device to
another using the NetBIOS protocol.
ΓòÉΓòÉΓòÉ 22.20.3. traffic filtering ΓòÉΓòÉΓòÉ
traffic filtering
Synonymous with filtering. A configurable LAN Distance Connection Server
feature that reduces the amount of LAN traffic that flows across a connection
to only the data frames that are needed by the participating workstations.
ΓòÉΓòÉΓòÉ 22.21. U ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.21.1. user ΓòÉΓòÉΓòÉ
user
A security classification for the user who performs the LAN Distance tasks
associated with establishing and using LAN Distance connections, for example,
dialing and running LAN applications. See LAN Distance administrator and see
also LAN Distance security administrator for the other user types defined by
the LAN Distance product.
ΓòÉΓòÉΓòÉ 22.21.2. user account ΓòÉΓòÉΓòÉ
user account
A record in the user account database that contains security specifications for
a particular user. It is organized by user ID and includes information such as
passphrase and privilege. It is managed by a LAN Distance security
administrator.
ΓòÉΓòÉΓòÉ 22.21.3. user account database ΓòÉΓòÉΓòÉ
user account database
A directory of LAN Distance user information. It is used to to perform user
identification and authentication for establishing LAN Distance connections and
restricting access to certain tasks.
ΓòÉΓòÉΓòÉ 22.21.4. user ID ΓòÉΓòÉΓòÉ
user ID
User identification; a unique name that identifies a user.
ΓòÉΓòÉΓòÉ 22.21.5. user type ΓòÉΓòÉΓòÉ
user type
A specific type of user that is granted a fixed set of privileges. Each
different type of user is granted a different set of privileges. See User, see
administrator, and see Security Administrator.
ΓòÉΓòÉΓòÉ 22.22. V ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.22.1. variable callback ΓòÉΓòÉΓòÉ
variable callback
A type of callback in which the telephone number to be dialed changes according
to the location of the workstation.
ΓòÉΓòÉΓòÉ 22.22.2. virtual LAN ΓòÉΓòÉΓòÉ
virtual LAN
A network consisting of individual workstations connected through the LAN
Distance product. It operates just as a physically connect LAN, through the
applications and LAN protocols supported transparently across the LAN Distance
connections.
ΓòÉΓòÉΓòÉ 22.23. W ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.23.1. WAN ΓòÉΓòÉΓòÉ
WAN
See Wide Area Network (WAN).
ΓòÉΓòÉΓòÉ 22.23.2. wide area network (WAN) ΓòÉΓòÉΓòÉ
wide area network (WAN)
A network that provides communication services to a geographic area larger than
that served by a local area network (LAN). In relation to the LAN Distance
product, communication on a WAN is accomplished across telephone lines.
ΓòÉΓòÉΓòÉ 22.24. X ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.25. Y ΓòÉΓòÉΓòÉ
ΓòÉΓòÉΓòÉ 22.26. Z ΓòÉΓòÉΓòÉ