This file contains important information about QwikSwitch for OS/2.
The manual for this release is the 'QwikSwitch User's Guide'.
This file addresses the following topics:
o Corrections to the Manual
o Enhancements to QwikSwitch
o Comprehensive Installed File List
o OS/2 WorkPlace Shell - Keyboard commands for:
Startup Tasks
OS/2 Command Line Tasks
DOS Command Line Tasks
System Tasks
Window Tasks
Text Window Tasks
Help Window Tasks
Contents Window Tasks
Object Tasks
Menu Tasks
Button Tasks
Text Field Tasks
Numeric Field Tasks
Hidden List Field Tasks
Scrollable List Tasks
Notebook Tasks
NOTE: This version requires OS/2 2.1 or higher. If you need to run under
OS/2 2.0, contact BitWare Consulting for a free disk containing a special
version that will run under OS/2 2.0, but without the OS/2 lockup feature.
CORRECTIONS TO THE MANUAL
_________________________
Page 2
add 4 new QwikTalk words for folders: Drives, Information, Startup & System Setup
NEW! Drag & Drop. QwikSwitch now has the ability to open any WPS folder. To assign a folder to a hot-key or QwikTalk entry, first select the hot-key or QwikTalk entry, then drag and drop the folder in the area indicated on the main QwikSwitch window (just below the hot-key application button). Don't forget to press the 'Save' button if you wish to permanently record the selection. The drop action will record all the necessary information needed by QwikSwitch to open the folder.
NOTE: In order to restore a folder with QwikSwitch that been minimized, you must have the "Button appearance for windows" (open->settings->window) for the folder set to "Minimize button", not "Hide button". Setting the "Minimized button behavior" to "Hide window" will achieve the same result as "Hide button".
NEW! QwikSwitch can now use the customized DOS settings of a DOS program object. You must, however, use the .exe located in the drives folder. You can change the DOS settings for the .exe object in the drives folder, just like any other program object. Drag and drop onto QwikSwitch. Data file objects from the drives folder may also be assigned to QwikSwitch. The default action for opening data objects will be invoked.
HISTORY OF ENHANCEMENTS
__________________________
Version 1.1
1. QwikSwitch has 2 new pre-programmed 'Hot-keys':
i) CTRL+SHIFT+'keypad +' will lock up your OS/2 Desktop. (not supported on OS/2 2.0)
ii)CTRL+SHIFT+NUMLOCK will issue an OS/2 shutdown.
Version 1.2
1. Added speech recognition, using IBM's ICSS, where applications can be assigned to words, (ie 'EPM.EXE' to 'Editor'). ICSS run time libraries are required to use this facility.
2. Added special QwikWords: 'Lockup', 'Stop Listening', COMPUTER, and 'Turn mike Off'. 'Lockup' not available on OS/2 2.0 machines.
3. refer to additional file : QWIKTALK.TXT for more details on the speech recognition capibilities of QwikSwitch.
4. Additional button added to 'button bar' to turn on & off speech recognition.
5. QwikTalk Monitor added to monitor QwikSwitch Speech Recognition.
6. Preferences window & program startup windows changed to support setting up speech recognition
7. Added 1 new pre-programmed 'Hot-key':
i) CTRL+SPACE will toggle on/off the michrophone.
8. Added 'Speech demo'. See QWIKTALK.TXT for more details, and fun!
9. Documented how to start up full screen & seamless DOS & Windows sessions/applications.
10. If you have ICSS installed, you can enable speech recognition in QwikSwitch just by pressing the button to toggle speech recognition on/off. It is just to the left of the 'Disable' button. QwikSwitch speech recognition settings are available from the
preferences/options settings button. The 'Display Speech Monitor' option is highly recommended, as is will give you feedback on when a word was recognised.
11. QwikSwitch invoked 'Lock-up' disables Hot-keys and QwikTalk. Use CTRL+SHIFT+'keypad -' to enable QwickSwitch Hot-keys, and use CTRL+SPACE to enable QwikTalk.
12. QwikSwitch now opens folders.
13. DOS settings are now supported
QwikSwitch is "speech ready" for IBM's ICSS speech recognition technology* to meet special requirements. ICSS is speaker independent and recognizes continuous speech (no need to pause between words).
COMPREHENSIVE INSTALLED FILE LIST
_________________________________
INSTALL.CMD - the QwikSwitch install command
PLUS
After installation, files are organized on your hard disk as follows:
Your chosen QwikSwitch installation directory:
(C:\QWKSWTCH is the default)
README.TXT - this file
QWIK32.EXE - the QwikSwitch executable
QWIK32.HLP - the QwikSwitch Help
QWIK32.SET - initial settings for QwikSwitch
QWIKDLL.DLL - the QwikSwitch DLL
QWIKTALK.BNF - QwikTalk grammer file
QWIKTALK.CTX - QwikTalk speech context file
QWIKTALK.DIC - QwikTalk dictionary
QWIKTALK.DLL - the speech recognition DLL
QWIKTALK.INI - QwikTalk settings
QWIKTALK.LST - Alphabetic order list of valid QwikTalk words
QWIKTALK.TXT - text file containing the speech recognition 'Hot-key'/'QwikTalk' words & more details on QwikSwitch speech recognition capibilities
QWIKTSR.EXE - the DOS TSR for QwikSwitch
YESDAVE.WAV - optional file for demo
NODAVE.WAV - optional file for demo
OKDAVE.WAV - optional file for demo
OS/2 WorkPlace Shell - Keyboard Use
__________________________________
Startup Tasks:
Alt+F1 Restore default desktop
Ctrl+Shift+F1 Inhibit auto-start features
OS/2 Command Line Tasks (with KEYS ON):
Esc Clear command line
Home Move cursor to first character in command line
End Move cursor to last character in command line
Ins Turn on insert mode
Del Delete character above cursor
left arrow Move cursor one character to left
right arrow Move cursor one character to right
up arrow Display previous command in queue
down arrow Display next command in queue
Ctrl+left arrow Move cursor back to first character of a word
Ctrl+right arrow Move cursor to first character of next word
Ctrl+Home Deletes all characters to the left of cursor position
Ctrl+End Deletes all characters from cursor to the end of the command line
Enter Executes the command on the command line
DOS Command Line Tasks:
F1 Copies one character from the template to the command line
F2 char Copies characters prior to the next occurrence of "char"
from the template to the command line
F3 Copies the remaining characters from the template to the
command line
F4 char Skips characters prior to the next occurrence of "char"
in the template
F5 Copies the current command line to the template without
executing it and clears the command line
F6 Places and end-of-file character (Ctrl+Z) at the cursor
position in the current command line
System Tasks:
arrow keys Move among objects on desktop
Alt+Tab Switch to next window on desktop
Alt+Esc Switch to next window or full screen session
Ctrl+Esc Display the Window List
F1 Get help
Alt+Shift+Tab Switch to desktop
Ctrl+Alt+Delete Restart the system
Ctrl+Alt+NumLock(twice) Dump system to diskette in A: drive
(need diskettes created with CREATEDD command)
Ctrl+Alt+Shift+O Display credits
when the desktop is active and no objects are selected:
Shift+F10 Display the pop-up menu for the desktop
Print Screen Print the screen
Window Tasks:
Tab Move to next area in window
Shift+Tab Move to previous area in window
F10 or Alt Activate menu bar
Shift+F10 Display the pop-up menu for the window
Alt+Space Display cacaded menu for window functions
or Shift+Esc in pop-up menu for window
Alt+F4 Close window
Alt+F5 Restore window to normal size
Alt+F7 Move window
- Use arrow keys to move window
- Press Enter when it is in the desired position
Alt+F8 Size window
- Press left or right arrow key to indicate which side to adjust
- Adjust width with left and right arrow keys
- Press up or down arrow key to indicate whether to adjust top or bottom
- Adjust height with up and down arrow keys
- Press Enter when it is the desired size
Alt+F9 Minimize window
Alt+F10 Maximize window
Alt+F11 Hide window
Alt+Home Switch between DOS full screen and window modes
Alt+Insert Create a new object and place it in the clipboard
when no objects are selected:
Shift+F10 Display help about using help
Text Window Tasks:
Tab Insert tab character and move cursor to next tab stop
Alt+Backspace Undo
Shift+Delete Cut
Ctrl+Insert Copy
Shift+Insert Paste
Delete Clear
Ctrl+F Find
Ctrl+right arrow Move cursor to beginning of next word
Ctrl+left arrow Move cursor to beginning of previous word
see also Text Field Tasks
Help Window Tasks:
Esc Return to the previous help window or remove the initial help window
Tab Move the cursor to the next highlighted word or phrase
Shift+Tab Move the cursor to the previous highlight word or phrase
F1 Display help for the help window
F2 Display help for the object or window for which help was initially displayed
F6 Move the cursor to and from buttons in the same window
F7 Move the cursor to and from buttons in a different window
F9 Display keys help
Shift+F10 Display help about using help
F11 or Shift+F1 Display the help index
F12 or Shift+F2 Display the tutorial
Alt+F6 Switch between the help window and the object or window for which help was displayed
Ctrl+A Copy the topic and add it to the end of a temporary file
Ctrl+C Display the help table of contents
Ctrl+F Copy the topic to a temporary file
Ctrl+L Display a list of libraries that contain help topics
Ctrl+N Open a new help window
Ctrl+S Search for a word or phrase
Ctrl+Ins Copy the topic to the clipboard
Contents Window Tasks:
+ Expand one level
* Expand branch
Ctrl+* Expand all branches
- Collapse branch
Ctrl+- Collapse all branches
Ctrl+C Contents
Ctrl+I Index
Ctrl+H Viewed pages
Ctrl+L Libraries
Object Tasks:
Space Bar Select or deselect the object
Ctrl+/ Select all objects
Ctrl+\ Deselect all objects
letter keys Select next object starting with the given letter
Shift+F8 Begin and end selecting multiple objects
Shift+F10 Display pop-up menu for a selected object
Enter Open a selected object
Menu Tasks:
Home Select first choice
End Select last choice
up arrow Move to previous choice
down arrow Move to next choice
right arrow Show cascaded menu
(when there is an arrow button on the selected choice)
left arrow Hide cascaded menu
letter keys Select choice with that letter underlined
Button Tasks:
Space Bar Push the button with the cursor box
Enter Push the highlighted button
Text Field Tasks:
Home Go to beginning of current line
End Go to end of current line
Del Delete character to right of cursor
Backspace Delete character to left of cursor
Ctrl+Home Go to beginning of first line
Ctrl+End Go to end of last line
Page Up Scroll up one page
Page Down Scroll down one page
Ctrl+Page Up Scroll left one page
Ctrl+Page Down Scroll right one page
Shift+(any) Select text
Numeric Field Tasks:
Page Up Increase value
Page Down Decrease value
Hidden List Field Tasks:
Alt+down arrow Display hidden list
Scrollable List Tasks:
Home Select first item in list
End Select last item in list
F7 or Page Up Scroll up one page
F8 or Page Down Scroll down one page
Ctrl+Page Up Scroll left one page
Ctrl+Page Down Scroll right one page
Notebook Tasks:
Alt+up arrow Move to notebook tab
Alt+down arrow Move to notebook page
when selected field is not an input field:
Alt+Page Up Go to previous page in notebook
Alt+Page Down Go to next page in notebook
when selected field is not an input field or scrollable list:
