OS/2 Shareware BBS: 11 Util/11-Util.zip/jumpkey.zip/jumpkey.inf

OS/2 Help File | 1996-06-15 | 99KB | 830 lines

ΓòÉΓòÉΓòÉ 1. Overview ΓòÉΓòÉΓòÉ

JumpKey/2 2.3.0 allows you to set up key combinations that will jump directly
to a specific OS/2 Window.  You can configure up to 32 JumpKey/2 sessions to
jump to as well as up to 32 sessions that will be toggled in a ring.

You can configure the keys that will initiate each jump, as well as the titles
that are jumped-to. Almost every key can be defined to make a jump.

There is only one default key assignment:

shift-ctrl-0 = Make JumpKey Visible

If this is the first time you have started JumpKey/2, Configure will be
automatically selected from the Options menu to set up session titles and keys.

JumpKey/2 can be hidden while it operates or you can leave it as an icon, or a
displayed window.

Any items that you configure can be saved for the next time you start
JumpKey/2.

Note:  You CANNOT jump FROM a FULL-SCREEN session, such as a Full-Screen
Command Prompt, or DOS. You ARE permitted to jump TO one of these sessions.


ΓòÉΓòÉΓòÉ 2. Installation ΓòÉΓòÉΓòÉ

There are two installation methods depending on whether you have received the
program from a network as a ZIP file (such as Compuserve(tm)) or you have
received an installation diskette.  Use the procedure that applies to the media
you have received.

     From a ZIP file

     From a Diskette or CDROM


ΓòÉΓòÉΓòÉ 2.1. Installation from a ZIP File ΓòÉΓòÉΓòÉ

To unpack the network file, Info-ZIP's UNZIP is required. This program is
available for both DOS and for OS/2. Check with the network where you obtained
JumpKey/2 for details on obtaining Info-ZIP's UNZIP.

To install JumpKey/2:

   1. Create a temporary subdirectory with the commands:

                    c:
                    cd c:\
                    md TEMP
                    cd TEMP

      Note:  The TEMP directory is a suggested name. Any directory name can be
      used, or you can unpack in an existing directory.

   2. You will be sent JMP230.ZIP. Move this file to the C:\TEMP directory.

   3. Unpack the files with the command:

                    UNZIP JMP230.ZIP

   4. Start the install program with the command:

                    INSTALL

   5. The INSTALL program will prompt you for the installation location for
      JumpKey/2.  There is contextual help for all the installation choices.

      A folder for JumpKey will be created, with an entry for the JumpKey
      program, and to view the INF, README and LICENSE files.

   6. Make sure that "Update CONFIG.SYS" is selected.

   7. Select one and only one keyboard.

   8. If you want to start JumpKey from a command line, and you did not select
      "Update CONFIG,SYS", you must make sure that the target directory is
      located in the PATH, LIBPATH and HELP environment variables.

   9. You can modify the program object for JumpKey that is created with
      parameters from the command line options

  10. Delete the files that were created in the TEMP directory. The easiest way
      will be to drop the TEMP directory into the OS/2 SHREDDER from a DRIVES
      object.


ΓòÉΓòÉΓòÉ 2.2. Installation from a Diskette or CDROM ΓòÉΓòÉΓòÉ

The JumpKey/2 diskette or CDROM will have all the required files in a
ready-to-install form.  Use the following steps to install them on your
machine.

   1. From diskette, start the install program with the command:

                    A:\INSTALL
      where A is the diskette drive you are installing from.

   2. From CDROM, start the install program with the command:

                    D:\path\INSTALL
      where D is the CDROM drive letter, and path is the location on CDROM you
      are installing from.

   3. The INSTALL program will display the README file for this version of
      JumpKey/2.  There is contextual help for all the installation choices.

      A folder for JumpKey will be created, with an entry for the JumpKey
      program, and to view the INF, README and LICENSE files.

   4. Make sure that "Update CONFIG.SYS" is selected.

   5. Select one and only one keyboard.

   6. If you want to start JumpKey from a command line, and you did not select
      "Update CONFIG,SYS", you must make sure that the target directory is
      located in the PATH, LIBPATH and HELP environment variables.

   7. You can modify the program object for JumpKey that is created with
      parameters from the command line options


ΓòÉΓòÉΓòÉ 3. Command Line ΓòÉΓòÉΓòÉ

If you have installed JumpKey/2 in a directory in both the PATH and the
LIBPATH, you can start JumpKey/2 with the command:

        start JUMPKEY [options]
or you can place the command line options as parameters in the settings
notebook for the program object.

The options that can be specified are:

 Option    Action
 /h
           Makes JumpKey/2 hide. It will still operate, but you will not be
           able to see it, and there will not be an entry in the Window List.
           If you want to see the window again, you can either:
               Start JumpKey/2 again. This will not start another copy of the
                program. It will make the first copy visible again.
               Use the shift-ctrl-0  key to make the JumpKey/2 program
                visible.  Use the Configure menu item to change the default key
                for this function to another key sequence. set up another key
                combination to perform this action.
               Double-click on the object in the folder where you started
                JumpKey/2.
 /n
           Starts JumpKey/2 as an icon.
 /d
           Uses all program defaults. This will cause JumpKey/2 to discard any
           options you have previously saved. Use this option only if you want
           to discard all your settings.
 The '/' is optional. For example, to specify ALL the options, use the command:

          start JUMPKEY /hnd
 The options can be in ANY order.

 Note:  Make sure that the following DLLs

          hotdll32.dll
          jumpres.dll
 are located somewhere in the LIBPATH. If it is NOT, you will receive the
 message:

          The system cannot find the file HOTDLL32.
 from OS/2.

 Note:  You can also add these options to the JumpKey/2 program object in the
 JumpKey/2 folder.


ΓòÉΓòÉΓòÉ 4. Main Menu ΓòÉΓòÉΓòÉ

The main menu can be selected by clicking on the menu items, or pressing the
Alt key and an underlined letter on the menu.

     Actions

     Options

     Help


ΓòÉΓòÉΓòÉ 4.1. Actions Menu ΓòÉΓòÉΓòÉ

The Actions menu contains a single item:

     Hide


ΓòÉΓòÉΓòÉ 4.1.1. Hide ΓòÉΓòÉΓòÉ

This menu item will make the JumpKey/2 program invisible. It will continue to
operate, but you will not see the program either on the Desktop, as an Icon, or
in the Window List.  To make the program visible again you can:

     Start JumpKey/2 again. This will not start another copy of the program.
      It will make the first copy visible again.
     Use the shift-ctrl-0  key to make the JumpKey/2 program visible.  Use the
      Configure menu item to set up another key combination to perform this
      action.
     Double-click on the object in the folder where you started JumpKey/2.


ΓòÉΓòÉΓòÉ 4.2. Options Menu ΓòÉΓòÉΓòÉ

This menu has two menu items:

     Configure

     View keys


ΓòÉΓòÉΓòÉ 4.2.1. Configure ΓòÉΓòÉΓòÉ

This menu item will initiate the JumpKey/2 configuration Panel.

This dialog panel lets you set up the keys to be used for JumpKey/2 as well as
the titles used for the session names.

To define a key, follow these steps:

   1. Select the key you want to define from the Key Names list, or

      select a shift key setting and then select a key from the displayed
      keyboard by pressing a key with the mouse.

      The current definition for this key will be displayed in the Definition
      list.

   2. Select a new definition in the Definition list.

   3. Move the cursor to the Session Title Edit box and type in a session title
      or select one from the session title pulldown list. The pulldown list has
      everything currently in the Window List.

   4. Click on the Maximize Session check box if you would like this session to
      maximize when you jump to it.

   5. Click on the Exact Match check box if you have sessions with similar
      names, and you want to jump only if there is an exact title match.

   6. The list of sessions for the Toggle function will display all the active
      3270 sessions. You can change this list by modifying the order of the
      items, or adding or deleting items from the list.

 When you have finished defining ALL your keys, press the OK button.

 If you want to discard your changes to the defined keys, press the Cancel
 button.


ΓòÉΓòÉΓòÉ 4.2.2. Key Names List ΓòÉΓòÉΓòÉ

This list is an alphabetical list of the keys available for redefinition. You
can either select an entry on this list, or press a button in the displayed
keyboard above this list.

If the key is not present on an old PC keyboard, the name will have -enh
appended to the end of the key name. For example, the home key on the center of
a Model 70 keyboard is known as home-enh, while the home key on the numeric
keypad is simply home.

The keys may also have a prefix of:

 alt-
           indicates holding either ALT key and pressing the key.
 ctrl-
           indicates holding either CTRL key and pressing the key.
 shift-
           indicates holding either SHIFT key and pressing the key.
 shift-ctrl-
           indicates holding either SHIFT key AND holding either CTRL key while
           pressing the key.


ΓòÉΓòÉΓòÉ 4.2.3. Definition List ΓòÉΓòÉΓòÉ

The following definitions are available:

 Name      Action
 No Action
           JumpKey/2 takes no action for the key. It is passed on to the Active
           OS/2 application.
 Make JumpKey/2 Visible
           will make JumpKey/2 visible again if it is hidden.  If JumpKey/2 is
           already visible, this key will have no effect.
 Toggle Forward
           this will have one of two actions, depending on the Active OS/2
           application.
             1. If the Active OS/2 application is NOT one of the toggle
                sessions, JumpKey/2 will jump to the FIRST toggle session.

             2. If the Active OS/2 application IS one of the toggle sessions,
                JumpKey/2 will jump to the NEXT toggle session. When this item
           is selected, you cannot select the Session Title Edit box.
 Toggle Backward
           this will have one of two actions, depending on the Active OS/2
           application.
             1. If the Active OS/2 application is NOT one of the toggle
                sessions, JumpKey/2 will jump to the FIRST toggle session.

             2. If the Active OS/2 application IS one of the toggle sessions,
                JumpKey/2 will jump to the PREVIOUS toggle session. When this
           item is selected, you cannot select the Session Title Edit box.
 Toggle Minimize
           this will minimize all Toggle sessions that are configured in the
           Toggle Session Title List. When this item is selected, you cannot
           select the Maximize Session checkbox or the Session Title Edit box.
 Toggle Maximize
           this will maximize all Toggle sessions that are configured in the
           Toggle Session Title List. When this item is selected, you cannot
           select the Maximize Session checkbox or the Session Title Edit box.
 Toggle Restore
           this will restore all Toggle sessions that are configured in the
           Toggle Session Title List. When this item is selected, you cannot
           select the Maximize Session checkbox, or the Session Title Edit box.
 Minimize All
           this will minimize all running programs.
 Maximize All
           this will maximize all running programs.
 Restore All
           this will restore all running programs.
 Lockup System
           this will invoke the OS/2 desktop lockup
 Shutdown System
           this will initiate OS/2 shutdown.

           Note:  You will NOT be asked to confirm this operation.
 <jump session name>
           Each of these will jump to the specified OS/2 session.  When
           configured, the name of this session will be displayed in definition
           list and in the the Session Title Edit box above this list, where it
           can be changed.

           The term 'not defined xx'  (where xx is a number from 1 to 32) will
           be displayed for each entry in the list until a session name has
           been entered for the item.


ΓòÉΓòÉΓòÉ 4.2.4. Session Title Edit Box ΓòÉΓòÉΓòÉ

This is a combination box where you can either type the name of the session to
be jumped-to for the session number displayed in the Definition List, or you
can pull down the list of sessions as displayed in the Window list.  If you
click on the arrow to the right of this box, a list of all the currently
running sessions will be displayed.  Select the session with the keyboard or
mouse.

The item can be any part of a title in the Window List. Remember that the first
match for this title will be the session that is jumped-to.

The search is NOT case-sensitive, but any blanks or punctuation must be
included just as displayed in the Window List.

Note:  You cannot select or type into this field unless jump session is
selected in the Definition List.


ΓòÉΓòÉΓòÉ 4.2.5. Maximize Session Checkbox ΓòÉΓòÉΓòÉ

This check box should be selected if you would like the session whose name is
displayed in the Session Title Edit box to become maximized when JumpKey/2
switches to it.

Some applications will fill the entire screen when maximized. Others will
change shape, but still not fill the entire screen.

This option will cause the application to enlarge itself to it's largest size.

Note:  You cannot select this check box unless Toggle Forward, Toggle Backward
or a jump session title is selected in the Definition List.


ΓòÉΓòÉΓòÉ 4.2.6. Exact Match Checkbox ΓòÉΓòÉΓòÉ

This check box should be selected if you would like to jump to the session
whose name is displayed in the Session Title Edit box only if it is an EXACT
match for a Window List entry.

You may have applications with similar names, or names that are extensions of a
name, for example:

    Command Window
    Command Window:2

If you defined a Session Title called Command Window, and you want to make sure
JumpKey/2 always jumps to the first of the two Window List entries above, you
would need to select Exact Match.

Note:  You cannot select this check box unless Toggle Forward, Toggle Backward
or a jump session title is selected in the Definition List.


ΓòÉΓòÉΓòÉ 4.2.7. Toggle Session Title List ΓòÉΓòÉΓòÉ

This is a list box that contains the names of your 3270 sessions. These
applications will be accessed by the key defined as Toggle Minimize, Toggle
Forward or Toggle Backward in the Definition List. The Toggle Forward and
Toggle Backward keys will have one of three actions, depending on the Active
OS/2 application.

   1. If the Active OS/2 application is NOT one of the toggle sessions,
      JumpKey/2 will jump to the FIRST toggle session.

   2. If the Active OS/2 application IS one of the toggle sessions, Toggle
      Forward will jump to the NEXT toggle session; Toggle Backward will jump
      to the PREVIOUS toggle session.

   3. If Skip Minimized has been selected, JumpKey/2 will not switch to
      Minimized sessions. Instead, the next or previous restored or maximized
      session will be switched-to.

 If you have not started, or you do not have the Communications Manager, this
 list will be empty. To make this list correct, start the Communications
 Manager before configuring JumpKey/2.

 To change an item in the list, use the cursor or the mouse to select an item,
 then edit the item as displayed in the Toggle Session Title Edit  box, located
 just above the list, or select one from the Toggle Session Title Edit pulldown
 list. The terms 'not defined xx' will be displayed in the Toggle Session Title
 List (where xx is a number from 1 to 32) until an entry has been made for this
 item.

 Note:  You cannot select this list unless toggle Minimize, Toggle Forward or
 Toggle Backward is selected in the Definition List.


ΓòÉΓòÉΓòÉ 4.2.8. Toggle Session Title Edit Box ΓòÉΓòÉΓòÉ

This is a combination box where you can either type the name of the session to
be jumped-to for the toggle function, or you can pull down the current list of
Communications Manager sessions. If you click on the arrow to the right of this
box, a list of all the currently running Communications Manager sessions will
be displayed. Select the session with the keyboard or mouse.

Simply type over any values displayed in this box, or select from the pull down
list. Then Click on OK to accept the change.

To delete an item from the Toggle list,  simple blank-out or delete all the
characters in the item, then select another item in the list. The list will be
adjusted for the now empty entry.

Note:  You cannot select or type into this field unless toggle Minimize, Toggle
Forward or Toggle Backward is selected in the Definition List.


ΓòÉΓòÉΓòÉ 4.2.9. Skip Minimized Checkbox ΓòÉΓòÉΓòÉ

This check box should be selected if you would like JumpKey/2 to bypass Toggle
Sessions that are minimized.

When this option is selected, the keys defined as the toggle Forward and Toggle
Backward will jump to the next or previous restored or maximized session
defined in the Toggle Session Title List. If NONE of the defined sessions are
restored or maximized, JumpKey/2 will jump to the first session.

Note:  You cannot select this check box unless toggle Minimize, Toggle Forward
or toggle Backward is selected in the Definition List.


ΓòÉΓòÉΓòÉ 4.2.10. Toggle Through Like-Named Sessions Checkbox ΓòÉΓòÉΓòÉ

This check box affects all sessions except the toggle sessions. If selected
JumpKey/2 will loop through all sessions that match the session title.

For example, let us assume that you used the LaunchPad to start several
sessions that have a title of "OS/2 Window". Let us also assume that you have
another session called "Command Window".

Use the JumpKey/2 settings to configure the key ctrl-1 to jump to a session
titled "WINDOW" and do not select exact match.

If Toggle Through Like-Named Sessions is ON, each time you pressed ctrl-1,
JumpKey/2 would in turn toggle to each of the sessions titled "OS/2 Window",
and then also toggle to the session titled "Command Window".

If Toggle Through Like-Named Sessions is OFF, each time you pressed ctrl-1,
JumpKey/2 would jump only to the first session it found. This could be one of
the "OS/2 Window" sessions or the session titled "Command Window".

Use the JumpKey/2 settings to configure the key ctrl-1 to jump to a session
titled "OS/2 WINDOW" and DO select exact match.

If Toggle Through Like-Named Sessions is ON, each time you pressed ctrl-1,
JumpKey/2 would in turn toggle to each of the sessions titled "OS/2 Window",
but would not toggle to the session titled "Command Window".

If Toggle Through Like-Named Sessions is OFF, each time you pressed ctrl-1,
JumpKey/2 would jump only to the first session titled "OS/2 Window" that it
found.


ΓòÉΓòÉΓòÉ 4.2.11. Do Not Jump To Hidden Windows Checkbox ΓòÉΓòÉΓòÉ

This check box affects all sessions except the toggle sessions. If selected
JumpKey/2 will not jump to windows which are hidden from view in the Window
List. If you have trouble jumping to a session, try turning this option OFF.


ΓòÉΓòÉΓòÉ 4.2.12. OK Button ΓòÉΓòÉΓòÉ

Pressing the button accepts any changes on this panel and removes the Configure
panel.


ΓòÉΓòÉΓòÉ 4.2.13. Cancel Button ΓòÉΓòÉΓòÉ

Pressing the button discards any changes on this panel and removes the
Configure panel. If changes have been made, you will be asked to confirm before
discarding the changes.


ΓòÉΓòÉΓòÉ 4.2.14. Defined Keys Panel ΓòÉΓòÉΓòÉ

This dialog panel lets you view the keys that are currently defined. The list
that is provided contains two columns:

     The names of the defined keys.

     The definition for the keys.

 If you double-click on a list item, JumpKey/2 will try to switch to that
 session. If you have chosen a toggle or system function, a warning tone will
 sound.

 At the bottom of this panel are buttons to select:

     Close - removes this dialog panel.

     Print - sends the displayed list to the printer defined as LPT1. You will
      hear a confirmation tone when the list has been sent to the printer.


ΓòÉΓòÉΓòÉ 4.3. Help Menu ΓòÉΓòÉΓòÉ

The Help menu lets you find out more information about the program.


ΓòÉΓòÉΓòÉ 4.3.1. Help Index ΓòÉΓòÉΓòÉ

This menu item displays the Help Index.


ΓòÉΓòÉΓòÉ 4.3.2. General Help ΓòÉΓòÉΓòÉ

This menu item will start the help system at the first JumpKey/2 help panel.


ΓòÉΓòÉΓòÉ 4.3.3. Keys Help ΓòÉΓòÉΓòÉ

Alt-F11 performs the JumpKey/2 hide function from the JumpKey/2 main window.

See your OS/2 reference for more information on standard key usage.


ΓòÉΓòÉΓòÉ 4.3.4. Help for Help ΓòÉΓòÉΓòÉ

This menu item tells you how to use the OS/2 help system.


ΓòÉΓòÉΓòÉ 4.3.5. Product Information ΓòÉΓòÉΓòÉ

The Product Information Panel contains the Copyright and program version.


ΓòÉΓòÉΓòÉ 5. Command-Line INI Tool JumpINI ΓòÉΓòÉΓòÉ

JumpINI is used to modify a JUMPKEY .INI file from the OS/2 command line.
JumpKey 2.2.1 or 2.3.0 must already be installed.

Correct Usage:

  JUMPINI keyname|togglexx|@textfile session|function [/option...]


ΓòÉΓòÉΓòÉ 5.1. Setting A Single Key ΓòÉΓòÉΓòÉ

To set a single key, use the command in the form:

  JUMPINI keyname function|session [/option...]

For example:

  JUMPINI ctrl-1 workframe

Options can also be used:

  JUMPINI ctrl-1 workframe /max /partial
See the section below on OPTIONS for details,

If the session title has embedded blanks, enclose the title in double quotes:

  JUMPINI ctrl-1 "IBM workframe/2"

If you want to assign a function to a key, use one of the function names:

  JUMPINI ctrl-1 hotview
The functions available are:

 nothing        No Action (this clears a key definition)
 hotview        Make JumpKey/2 Visible
 togfor         Toggle Forward
 togback        Toggle Backward
 togmin         Toggle Minimize
 togmax         Toggle Maximize
 togres         Toggle Restore
 minall         Minimize All
 maxall         Maximize All
 resall         Restore All
 lockup         Lockup System
 shutdown       Shutdown System

 To see a list of all the available keynames, issue the command:

    JUMPINI /k

 The list of keynames is part of JumpKey, and may vary according to the
 language and keyboard selected.


ΓòÉΓòÉΓòÉ 5.2. Setting Toggle Session Names ΓòÉΓòÉΓòÉ

You can specify the session names for the toggle function by specifying each
session name. For example:

  JUMPINI toggle01 "- A -"
  JUMPINI toggle02 "- B -"
  JUMPINI toggle03 "Dos Window"

Note:  Please do not leave empty names in the list. For example, if you only
set names 01 02 and 04, the toggle function will never access toggle04. The
ring ends at the first undefined entry.

The names available are:

      toggle01
      toggle09
      toggle17
      toggle25
      toggle02
      toggle10
      toggle18
      toggle26
      toggle03
      toggle11
      toggle19
      toggle27
      toggle04
      toggle12
      toggle20
      toggle28
      toggle05
      toggle13
      toggle21
      toggle29
      toggle06
      toggle14
      toggle22
      toggle30
      toggle07
      toggle15
      toggle23
      toggle31
      toggle08
      toggle16
      toggle24
      toggle32
 All the toggle sessions share a single "exact match" flag and "maximize" flag.


ΓòÉΓòÉΓòÉ 5.3. Using An Input File ΓòÉΓòÉΓòÉ

Instead of calling JUMPINI several times to define keys, you can use a text
file as input to JUMPINI. Precede the filename with an '@' sign. For example:

  JUMPINI @ini.jmp
Do not place a blank between the '@' and the filename. Options

  /F /D /W /K and /Q
must still be placed on the command line. Other options are not valid on the
command line when using input from a file. Instead, put these options in the
file itself (see example below).

File ini.jmp could contain (as it does in the shipped example):

ctrl-1 hotview
ctrl-2 nothing
@ini2.jmp
ctrl-3 workframe /exact /max
ctrl-8 "workframe of my life" /exact /max
/skipmin
toggle01 "- A"
toggle02 "- B"
toggle03 "- C"
toggle04 HTERMPM

In this example, there is an embedded file "ini2.jmp" that also contains:

ctrl-4 hotview
ctrl-5 nothing
ctrl-6 workframe /exact /max

If you embed a file in itself the program will fail (there is no checking for
this) with a SYS3175.


ΓòÉΓòÉΓòÉ 5.4. Options ΓòÉΓòÉΓòÉ

Options are NOT case sensitive, and can be placed anywhere on the command line
and many can be placed in an input file. Only the first letter of each option
is required.

 /F<inifile>
           Where <inifile> is the ini file to modify.  If omitted,
           /OS2/JUMPKEY.INI on your OS2 boot disk is the default. Do not leave
           a blank after the 'F'.  i.e.:

                          JUMPINI /Ftest.ini ctrl-1 JumpKey
           This option cannot be used in an input file.
 /Exact | /Partial
           Specifies how to match a session name. If "partial" is set (the
           default) a session name of "Window" would match:

                            "Dos Window"
                            "OS/2 Window"
                            "Win-OS/2 Window"
           If exact is set, only a session titled "Window" would match. i.e.:

                          JUMPINI /Partial ctrl-1 Window
                          JUMPINI /exact   ctrl-2 "Dos Window"
           Do not use this option on the command line if an input file is used.
 /Max | /Nomax
           Specifies to maximize or do not maximize on switch. i.e.:

                          JUMPINI /Max ctrl-1 Window
           Do not use this option on the command line if an input file is used.
           This option can be turned off by using:

                          JUMPINI /Nomax ctrl-1 Window
           or

                          JUMPINI /Max- ctrl-1 Window

 /Skip | /All
           This is used to skip minimized or jump to all toggle sessions. This
           option can be placed either on the command line or in an input file.
           i.e.:

                          JUMPINI /Skip
           This option can be turned off by using:

                          JUMPINI /All
           or

                          JUMPINI /Skip-

 /Loop | /One
           Specify this option to toggle through sessions with matching names,
           or only jump to the first session name found. This option can be
           placed either on the command line or in an input file. i.e.:

                          JUMPINI /Loop
           This option can be turned off by using:

                          JUMPINI /One
           or

                          JUMPINI /Loop-

 /Hidden | /Jumpall
           Specify this option to skip hidden sessions, or jump to all, even if
           they are hidden. This option can be placed either on the command
           line or in an input file. i.e.:

                          JUMPINI /Hidden
           This option can be turned off by using:

                          JUMPINI /Jumpall
           or

                          JUMPINI /Hidden-

 /Display
           Is used to display the current settings. i.e.:

                          JUMPINI /D
           This option should only be used on the command line. The output
           format is compatible as input to JUMPINI, so you can redirect output
           to a file:   JUMPINI /D >j.out You can then edit the file and use it
           as an input file:   JUMPINI @j.out
 /Words
           to display the function and toggle keywords. This option should only
           be used on the command line.
 /Keys
           to display the key names. This option should only be used on the
           command line.
 /Quiet
           to suppress informational messages. This option should only be used
           on the command line.


ΓòÉΓòÉΓòÉ 6. Support ΓòÉΓòÉΓòÉ

JumpKey 2.3.0 is provided as Employee Written Software by IBM. Support is
available on a best-effort basis by contacting the author, Thomas E. Link, at
[e-mail]. IBM Internal users can post questions to the JUMPKEY
forum on OS2TOOLS.

If you have a TCP/IP connection and you have the WebExplorer installed, you can
send mail directly to [e-mail].


ΓòÉΓòÉΓòÉ <hidden>  ΓòÉΓòÉΓòÉ

Press Ctrl-Esc, or click both mouse buttons together on the Desktop Background.
The displayed list contains all active OS/2 applications.


ΓòÉΓòÉΓòÉ <hidden>  ΓòÉΓòÉΓòÉ

This is the OS/2 application that has a highlighted border and is receiving all
keyboard input.


ΓòÉΓòÉΓòÉ <hidden>  ΓòÉΓòÉΓòÉ

An entry in the JumpKey/2 Toggle Session Titles list.