home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 8 Other
/
08-Other.zip
/
s521os2e.exe
/
sinfg30.hlp
(
.txt
)
< prev
next >
Wrap
OS/2 Help File
|
1998-09-03
|
103KB
|
3,897 lines
ΓòÉΓòÉΓòÉ 1. Trademark ΓòÉΓòÉΓòÉ
Trademark of IBM Corporation.
ΓòÉΓòÉΓòÉ 2. Trademark ΓòÉΓòÉΓòÉ
Trademark of Novell Corporation.
ΓòÉΓòÉΓòÉ 3. Parallel and Serial Port Information ΓòÉΓòÉΓòÉ
The Parallel and Serial Port Information window displays a variety of data
concerning the number and location of the parallel and serial I/O ports
installed in the system, including:
Number of physical parallel ports
This is the number of physical parallel ports in the system.
Logical Parallel Devices
This is the number of logical parallel devices in the system.
Number of physical serial ports
This is the number of physical serial ports in the system.
Logical Serial Devices
This is the number of logical serial devices in the system.
Serial Port Information
This information window displays details about a single serial port.
The data returned includes transfer speeds, buffer sizes, and
additional capabilities.
ΓòÉΓòÉΓòÉ 4. Operating System Information - OS/2 ΓòÉΓòÉΓòÉ
The Operating System Information window displays a variety of data concerning
the version and configuration of the operating system, including:
OS/2* Version
This is the version number of the operating system.
Virtual DOS Support
This indicates whether the DOS support for OS/2 is enabled or
disabled. This is done by setting the PROTECTONLY value in
CONFIG.SYS.
OS/2 Boot Drive
This is the drive letter from which OS/2 was booted.
Time Slice Duration
These are the minimum and maximum duration of the time slice given
to OS/2* tasks by the system. The time slice is the maximum time,
in milliseconds, an application will be allowed to execute before
the operating system temporarily stops the task ('preempts') in
order to give other tasks an opportunity to run. These values are
set using the TIMESLICE statement in CONFIG.SYS.
Maximum Wait Time
This is the maximum time, in seconds, that an application will wait
before receiving a time slice. This is used to prevent low priority
tasks from 'starving' if the system has a number of high priority
tasks which are CPU intensive.
Maximum Sessions
These are the limits on the number of sessions supported by the
version of OS/2* installed in the system. These limits include PM
sessions, OS/2* text mode sessions (full screen), and Virtual DOS
sessions.
System Timer Interval
This is the period of the timer 'tick' for the system. All events,
including time slices, are timed as multiples of this period. The
duration of the period is shown in milliseconds.
ΓòÉΓòÉΓòÉ 5. Operating System Information - Windows ΓòÉΓòÉΓòÉ
The Operating System Information window displays a variety of data concerning
the version and configuration of the operating system, including:
Windows Version
This is the version number of the Windows operating system.
Execution Mode
This indicates the mode in which Windows is running. Enhanced Mode
is only available on machines using an 80386 or higher
microprocessor, and permits applications complete access to usable
memory.
Kernel
This indicates which Windows Kernel Module was loaded.
DOS Version
This is the DOS version number.
DOS Revision
This is the DOS Revision number.
Boot Drive
This is the drive letter from which the system was booted.
ΓòÉΓòÉΓòÉ 6. Operating System Information - Windows NT ΓòÉΓòÉΓòÉ
The Operating System Information window displays a variety of data concerning
the version and configuration of the operating system, including:
Windows NT Version
This is the version number of the Windows NT operating system.
Build Number
This is the build number of the operating system.
Current CSD
This field provides additional information about the operating
system.
Fast Task Switching Enabled
This indicates whether fast task switching is enabled or disabled.
Fast task switching allows the user to use the Alt-Tab key
combination to cycle through currently running applications.
USER.EXE Debug Version Installed
This indicates whether or not the debugging version of USER.EXE is
installed.
Double Byte Character Set Enabled
This indicates whether or not the double byte character set (DBCS)
version of USER.EXE is installed.
Pen Window Extensions Installed
This indicates whether or not the Microsoft Windows for Pen
extensions are installed.
Total Usable Page File Bytes
This indicates the total number of bytes that can be stored in the
paging file.
Available Page File Bytes
This indicates the number of bytes available in the paging file.
System Directory
This indicates the path to the Windows NT system directory. This
directory typically contains files such as Windows libraries,
drivers, and fonts.
Windows Directory
This indicates the path to the Windows NT directory. This directory
typically contains files such as bitmaps, initialization files, and
help files.
ΓòÉΓòÉΓòÉ 7. Operating System Information - NetWare ΓòÉΓòÉΓòÉ
This window displays the different facets of operating system information that
have been collected on the NetWare** server.
ΓòÉΓòÉΓòÉ 8. Operating System Information - NetWare ΓòÉΓòÉΓòÉ
The Operating System Information window displays a variety of data concerning
the version and configuration of the operating system, including:
Server Name
This is the name of the server.
Revision Date
This is the revision date of the operating system software.
Revision Level
This is the revision level of the operating system software.
Copyright
This is the copyright statement for the operating system software.
NetWare** Version
This is the operating system name and version.
Maximum Connections Supported
This is the maximum number of connections supported by the server.
Connections In Use
This is the number of connections currently in use.
Maximum Number Of Volumes
This is the maximum number of volumes that can be mounted on the
local server.
SFT Level
This is the level of the System Fault Tolerance support on the
server.
TTS Level
This is the level of the Transaction Tracking System support on the
server.
Peak Connections Used
This is the largest number of connections in use at any one time
since the server was started.
Accounting Version
This is the version of the Accounting software present on the
server.
VAP Version
This is the version of the Value Added Process support present on
the server.
Queueing Version
This is the version of the Queueing software present on the server.
Print Server Version
This is the version of the Print Server software present on the
server.
Virtual Console Version
This is the version of the Virtual Console software present on the
server.
Security Restriction Level
This is the Security Restriction Level of the server.
Internet Bridge Support
If enabled, the server acts as a router.
CLIB Version
This is the version of the CLIB software present on the server.
CLIB Revision
This is the revision of the CLIB software present on the server.
ΓòÉΓòÉΓòÉ 9. Module List Information - Windows ΓòÉΓòÉΓòÉ
The Module List window displays a list of code, data and resources that are
currently loaded in the system's memory to be used by tasks during execution.
ΓòÉΓòÉΓòÉ 10. Module List Information - NetWare ΓòÉΓòÉΓòÉ
The Module List window displays a list of the NetWare** Modules currently
loaded on the server. If available, revision and copyright information will be
displayed for a particular module.
ΓòÉΓòÉΓòÉ 11. Task List Information ΓòÉΓòÉΓòÉ
The Task List window displays a list of currently active processes.
ΓòÉΓòÉΓòÉ 12. AUTOEXEC.BAT Information ΓòÉΓòÉΓòÉ
The AUTOEXEC.BAT window displays the system's AUTOEXEC.BAT file, listing last
access dates for files, where applicable.
ΓòÉΓòÉΓòÉ 13. AUTOEXEC.NCF Information ΓòÉΓòÉΓòÉ
The AUTOEXEC.NCF window displays the system's AUTOEXEC.NCF file, listing last
access dates for files, where applicable.
ΓòÉΓòÉΓòÉ 14. STARTUP.NCF Information ΓòÉΓòÉΓòÉ
The STARTUP.NCF window displays the system's STARTUP.NCF file, listing last
access dates for files, where applicable.
ΓòÉΓòÉΓòÉ 15. Desktop Information ΓòÉΓòÉΓòÉ
The Desktop Information window displays information about the desktop settings
for the Windows NT operating system, including:
Screen Saver Active
This indicates whether the screen saver is enabled or disabled.
Screen Saver Timeout
This indicates the length of inactivity, in minutes, after which the
screensaver will become active.
Icon Title Wrapping Enabled
This indicates whether icon title wrapping is enabled or disabled.
Icon title wrapping causes long icon names to wrap onto successive
lines.
Screen Width
This specifies the current width, in pixels, of the desktop area.
Screen Height
This specifies the current height, in pixels, of the desktop area.
ΓòÉΓòÉΓòÉ 16. Environment Information ΓòÉΓòÉΓòÉ
This window displays the names and corresponding values of environment
variables used by the Windows NT operating system. Environment variables
describe information that the operating system uses to find programs, set user
preferences, and control application behavior.
ΓòÉΓòÉΓòÉ 17. Mouse Information ΓòÉΓòÉΓòÉ
The Mouse Information window displays information about the type of mouse
installed on the system, including:
Mouse Type
This is the type of mouse attached to the system.
Number of Buttons
This is the number of buttons on the mouse.
Mouse Sensitivity
This reflects the mouse's sensitivity to movement, in Mickeys/cm. A
higher value indicates that smaller physical movements of the mouse
or pointing device are needed to move the mouse pointer a given
distance.
Vertical Scaling Factor
This reflects the responsiveness of the mouse pointer to vertical
mouse movement, in Mickeys/Pixel. A higher value indicates more
mouse movement is needed to move the mouse pointer.
Horizontal Scaling Factor
This reflects the responsiveness of the mouse pointer to horizontal
mouse movement, in Mickeys/Pixel. A higher value indicates more
mouse movement is needed to move the mouse pointer.
Mouse Handedness
This indicates if the mouse is setup for left-hand use or right-hand
use.
Double-click interval
This is the maximum amount of time that can elapse between two
clicks of a mouse button and still have the system recognize the
action as a double-click.
ΓòÉΓòÉΓòÉ 18. Parallel and Serial Port Information Menu ΓòÉΓòÉΓòÉ
The Parallel and Serial Port Information Menu displays a variety of data
concerning the number and location of the parallel and serial I/O ports
installed in the system.
ΓòÉΓòÉΓòÉ 19. Operating System Information Menu ΓòÉΓòÉΓòÉ
The Operating System Information Menu displays data concerning the name and
version of the operating system, as well as a variety of information concerning
the configuration of the operating system, including time-slice duration,
maximum number of sessions, and DOS support.
ΓòÉΓòÉΓòÉ 20. Model and Processor Information Menu ΓòÉΓòÉΓòÉ
The Model and Processor Information Menu displays data concerning the type of
personal computer system on which the System Information Tool is executing, as
well as the type and speed of the microprocessor used by the system.
System Information Tool also tests your Pentium processor to determine whether
it is an early processor that has the floating point flaw. If this flaw is
detected, System Information Tool will note this in the Model and Proccessor
Information window.
ΓòÉΓòÉΓòÉ 21. Mouse Information Menu ΓòÉΓòÉΓòÉ
The Mouse Information Menu displays information about the type of mouse
installed on the system, as well as the sensitivity and handedness of the
mouse.
ΓòÉΓòÉΓòÉ 22. Adapter Information ΓòÉΓòÉΓòÉ
If the expansion bus layout for a system is known, the Adapter Information
window will contain a graphical representation of the slots and adapters
installed in the systems. Otherwise, the Adapter Information window will
provide device configuration in the form of a listing of the devices it found
to be installed in your system. It will group the devices under one of the
following expansion bus headings:
o PCI Bus Information
o EISA Bus Information
o Micro Channel Bus Information
The following describes the information contained in the graphical
representation window.
The following data is provided for each slot:
o Slot size
o Slot number
o Adapter ID (Micro Channel adapters only)
o Adapter name
o Product ID (EISA adapters only)
The graphics to the left of the slot number indicate the size of the slot.
There are several possible slot lengths:
o 16-bit Micro Channel* Slot
o 16-bit Micro Channel Slot with Video Extension
o 32-bit Micro Channel Slot
o 32-bit Micro Channel Slot with Video Extension
o 64-bit PCI Slot
o 32-bit PCI Slot with RAIDport
o 32-bit PCI Slot
o 32-bit EISA Slot
o 16-bit ISA Slot
On some systems, there may be slots which will only allow a half-length
adapter to be installed.
On certain systems, there may be slots which contain more than one connector.
These connectors enable cards of different expansion buses to populate the
slot, For example, some slots can accept either a PCI or a Micro Channel card.
In the case of ISA slots or EISA slots which are empty or may have an ISA card
in them, a faded or grayed out adapter card graphic is displayed and specified
as undetectable.
The view of the slots will reflect that of this system. A message is provided
under the slot graphics to indicate the orientation of the slots.
If a PCI adapter contains a PCI to PCI bridge with an additional bus, the
expansion bus layout may be incorrect. The PCI to PCI bridge will use the PCI
device number of the expansion slot and appear in the slot. The other PCI
device on the adapter will appear on the system board.
While the slot is an accurate representation of the slot size, the adapter
card graphic does not reflect the actual size of the card(i.e. full length or
half-length). Detailed adapter information is displayed when a slot is
selected.
The System Board Devices section contains information about planar devices
(i.e. SCSI or video support on the system board). PCI devices on the system
board, EISA system board and EISA virtual devices are detailed in this
section. Detailed information is provided when these devices are selected.
For systems with a PCI bus, information about the PCI Interface level and
hardware characteristics is provided.
o PCI Interface Level
This identifies the PCI BIOS interface version level for this specific
implementation of PCI BIOS. This number is composed of a major and minor
version level.
o PCI Hardware Characteristics
This identifies what specific hardware characteristics the platform
supports in relation to accessing configuration space and generating PCI
Special Cycles. The PCI Specification defines two hardware mechanisms
for accessing configuration space. The PCI Specification also defines
hardware mechanisms for generating Special Cycles.
o Number of Last PCI Bus in System
This is the number of the last PCI bus in the system. PCI buses are
numbered starting at zero.
ΓòÉΓòÉΓòÉ 23. Virtual Devices ΓòÉΓòÉΓòÉ
Virtual devices are logical devices built into the system board.
ΓòÉΓòÉΓòÉ 24. Detailed System Board Information ΓòÉΓòÉΓòÉ
The detailed system board information consists of the following data:
Planar ID
This is the POS ID for the system board used to identify the system.
Built In Features
These are features that have been built into the system board.
POS Data
This is Programmable Option Select (POS) data used to automatically
configure the system.
Because built in features vary from system to system, the following is typical
information that might be given:
Serial Port
This is the serial port on the system board.
Serial Transmit Arbitration Level
This is the DMA channel the serial port will use to transmit data.
Serial Receive Arbitration Level
This is the DMA channel the serial port will use to receive data.
Parallel Port
This is the parallel port on the system board.
Parallel Port Arbitration Level
This is the DMA channel the parallel port will use to transfer data.
ΓòÉΓòÉΓòÉ 25. Micro Channel Bus Information ΓòÉΓòÉΓòÉ
The Micro Channel Bus Information window displays information about the Micro
Channel* adapters installed in the system. This information includes slot
number, adapter ID, and adapter name. Detailed Adapter Information is available
when item is selected.
ΓòÉΓòÉΓòÉ 26. Detailed Adapter Information ΓòÉΓòÉΓòÉ
The detailed adapter information consists of the following data:
Slot Number
This is the physical slot number in the system.
Enabled/Disabled
This is the enabled/disabled state of the adapter.
Adapter ID
This is a four digit number which uniquely identifies the adapter.
Adapter Name
This is a character string which identifies the adapter. While a
descriptive name is commonly used for most IBM* adapters and some
OEM adapters, the names do not necessarily give a clear description
of the adapter's function.
POS Data
This is Programmable Option Select data used to automatically
configure the system.
Additional information is provided for some of the more common adapters.
Because pertinent information varies depending on the adapter, the exact
details that will be displayed vary from adapter to adapter. The following is
typical information that might be given:
I/O Address
This is the unique address range for the adapter.
Arbitration Level
This is the DMA channel the adapter will use to transfer data.
Fairness On/Off
This controls whether the adapter will release control of the bus
when it has been using it exclusively.
ROM Address Range
This is the block of memory assigned for accessing the ROM of the
adapter.
ΓòÉΓòÉΓòÉ 27. Detailed Planar Device Information ΓòÉΓòÉΓòÉ
The detailed planar device information consists of the following data:
Planar Number
This is the logical slot number in the system.
Enabled/Disabled
This is the enabled/disabled state of the adapter.
Adapter ID
This is a four digit number which uniquely identifies the adapter.
Adapter Name
This is a character string which identifies the adapter.
POS Data
This is Programmable Option Select data used to automatically
configure the system.
Additional information is provided for some of the more common adapters.
Because pertinent information varies depending on the adapter, the exact
details that will be displayed vary from adapter to adapter. The following is
typical information that might be given:
I/O Address
This is the unique address range for the adapter.
Arbitration Level
This is the DMA channel the adapter will use to transfer data.
Fairness On/Off
This controls whether the adapter will release control of the bus
when it has been using it exclusively.
ROM Address Range
This is the block of memory assigned for accessing the ROM of the
adapter.
ΓòÉΓòÉΓòÉ 28. Detailed Adapter Information Menu ΓòÉΓòÉΓòÉ
The Adapter Information window displays information about the Micro Channel*
adapters installed in the system. This information includes the adapter id and
name. If more information is requested, the POS data and enabled/disabled state
of the adapter is provided. More configuration information is available on a
number of common adapters.
If the system has planar devices (i.e. SCSI or video support on the system
board), information on these devices is also provided.
Standard features such as serial and parallel ports are often built into the
system board. These items are detailed under Built In Features if the system
board can be identified .
ΓòÉΓòÉΓòÉ 29. Keys Help for System Information Tool ΓòÉΓòÉΓòÉ
The following keys are supported for use within System Information Tool.
Esc
Close the current window.
Up Arrow
Move to the selectable item above the current item in a menu.
Down Arrow
Move to the selectable item below the current item in a menu.
Left Arrow
Move to the selectable item to the left of the current item in a
menu.
Right Arrow
Move to the selectable item to the right of the current item in a
menu.
Home
Move to the first selectable item in a menu.
End
Move to the last selectable item in a menu.
Enter
Select and activate the current item in a menu.
Space Bar
Select and activate the current item in a menu.
Page Up
Scroll to the data located above the data currently displayed, if
the current window has scrolling activated.
Page Down
Scroll to the data located below the data currently displayed, if
the current window has scrolling activated.
Ctrl+Page Up
Scroll to the data located to the left of the data currently
displayed, if the current window has scrolling activated.
Ctrl+Page Down
Scroll to the data located to the right of the data currently
displayed, if the current window has scrolling activated.
F1
Display help for the current selectable item, or General Help for
the current window if no selectable items are present.
F3
Exit the application.
ΓòÉΓòÉΓòÉ 30. Serial Port Information ΓòÉΓòÉΓòÉ
The Serial Port Information window displays details about a single serial port.
The data returned includes transfer speeds, buffer sizes, and additional
capabilities.
ΓòÉΓòÉΓòÉ 31. Serial Port Information ΓòÉΓòÉΓòÉ
The Serial Port Information window displays details about a single serial port.
The data returned includes the following:
Date Transfer Rate
These indicate the speed, in bits per second, that the serial port
can transfer data. The speed can also be referred to as the baud
rate of the port.
Buffer Size
These indicate the number of bytes which can be buffered by the
device driver for the serial port.
Extended Hardware Buffer
This indicates whether or not the buffering capabilities of the
serial port controller are enabled. Buffering may allow the device
to reduce performance impacts on the operating system caused by
per-character transmit/receive interrupts.
ΓòÉΓòÉΓòÉ 32. Video Information ΓòÉΓòÉΓòÉ
The Video Information window displays details about the primary video adapter
and display, including the type adapter and display, amount of video RAM,
screen resolution and number of colors supported.
ΓòÉΓòÉΓòÉ 33. Video Information ΓòÉΓòÉΓòÉ
The Video Information window displays details about the video configuration, as
reported by the operating system, as well as details of the configuration of
the video adapters present in the system.
The first section of the window presents the data returned from the operating
system concerning the configuration of the primary video adapter (the adapter
used by the operating system for most applications). The information returned
includes the following:
Video Adapter Type
This is the name of the video adapter, or the name of the standard
adapter which is most similar to the primary video adapter. If the
operating system is OS/2*, a mismatch between this data and the
actual video hardware may indicate that the video adapter is not a
type recognized by OS/2*, or that OS/2* is configured for another
type of adapter.
Vendor String
This is a string that identifies the manufacturer of the video chip
set or adapter.
Video Display Type
This is the name of the video display, or the name of the standard
display which is most similar to the primary video display. If the
operating system is OS/2*, a mismatch between this data and the
actual display may indicate that the display identifies itself as
one of the standard displays, or that OS/2* is configured for
another type of display.
Video Memory
This is the total quantity of video RAM which has been detected on
the primary video adapter. The quantity is in kilobytes. This data
is only reported if the information is available.
Colors Displayed
This is the total number of different colors which may be displayed
at one time on the video display. This quantity is only relevant
for PM or Windows* applications. Full screen applications may use
video modes with different values.
Screen Resolution
These are the horizontal and vertical resolutions of the PM screen,
in pixels. These values are only relevant for PM or Windows*
applications. Full screen applications may use video modes with
different values.
Screen Size
These are the physical dimensions of the screen of the video
display. The values returned represent the horizontal and vertical
dimensions of the screen, in millimeters. A mismatch between this
data and the size of actual display may indicate that the display
identifies itself as one of the standard displays, or that the
operating system is configured for another type of display.
The window also includes a list of selectable items containing information on
the Video Subsystems. which have been found in the system. Selection of one
of these items will display additional data concerning the hardware
configuration of these subsystems. The subsystems reported include
XGA-compatible and 8514/A.
ΓòÉΓòÉΓòÉ 34. Keyboard Information ΓòÉΓòÉΓòÉ
The Keyboard Information window displays details about the keyboard attached to
the system, including the type of keyboard, country configuration, and
typematic rate.
ΓòÉΓòÉΓòÉ 35. Keyboard Information ΓòÉΓòÉΓòÉ
The Keyboard Information window displays details about the keyboard attached to
the system. The data returned includes the following:
Keyboard Type
This is the name of the keyboard, if the keyboard type can be
determined.
Country Code
This is ID of the country for which the keyboard is configured.
SubCountry Code
This is SubCountry Code for which the keyboard is configured.
Several countries have more than one keyboard layout, requiring
different configurations for the same country.
Code Page
This is the code page associated with the keyboard.
Typematic Rate
This is the typematic rate currently configured for the keyboard.
It is the rate, in characters per second, that a key which is held
down will generate characters.
Typematic Delay
This is the typematic delay currently configured for the keyboard.
It is the delay, in milliseconds, between when a key is first held
down and when the key begins to generate additional characters (at
the rate defined by the Typematic Rate).
ΓòÉΓòÉΓòÉ 36. Printer Information ΓòÉΓòÉΓòÉ
The Printer Information window displays details about the printers configured
for the system, including the port ID, printer driver type, and configured
printer model.
ΓòÉΓòÉΓòÉ 37. Printer Information ΓòÉΓòÉΓòÉ
The Printer Information window displays details about the printers configured
for the system, including the following:
Port
This is the logical port associated with the printer. 'COMx'
indicates a serial port, while 'LPTx' is a parallel port.
Driver
This is name of the printer driver being used for the given printer.
A variety of printers can often be supported by the same printer
driver.
Model
This is specific model of the configured printer, if available.
ΓòÉΓòÉΓòÉ 38. Error Log Information Help ΓòÉΓòÉΓòÉ
Error Log Information displays information about errors that are stored in the
system error log. This information may help resolve problems that have been
reported on this system. If there are errors in the log, you can select which
entry to display.
The information that is provided for each entry includes the entry number, the
type of error, and the date and time that it occurred. Additional information
is provided depending on the type of error.
If there are any errors recorded in the system error log, run the test programs
that came with your system.
ΓòÉΓòÉΓòÉ 39. Error Log Entry Help ΓòÉΓòÉΓòÉ
This window shows the data that is specific to the selected error entry.
The types of errors that may be encountered include the following:
Memory Parity
A parity error occurred when memory-module kits on the system board
were accessed. This error usually indicates a memory-module kit
failure.
Channel Check
A channel check was detected by one of the adapters installed in
this system. This usually indicates a failure of the adapter that
caused the channel check.
Watch Dog Timeout
An application program failed to respond within a specified time
period. This error usually indicates an application program
failure.
Bus Timeout
An error occurred during a data transfer by a device. The device
did not release control of the channel after being preempted by the
processor board. This error usually indicates a failure of either a
device or the processor board.
Level 2 Cache Parity
A parity error occurred on the processor board. This error usually
indicates a processor board failure.
Unknown
An error other than those listed above has occurred.
The Interrupt level is the number assigned to the interrupt signal generated
by a device. An interrupt signal is generated by a device, such as an adapter
card, in response to some event and is used to get the attention of the CPU.
Some interrupt levels are assigned to certain functions. For example,
interrupt level 1 is assigned to the keyboard.
The Arbitration level is a number assigned to a device which is using the
Micro Channel* bus. Bus arbitration is a method of sharing the Micro Channel*
bus resource. Access to the bus is based on a priority scheme. If two or
more devices are in contention for the bus, the arbitration level of each
device will determine the order in which the devices will be given access. The
device with the highest arbitration level will be given access first.
The Device ID is a unique identifier assigned to adapter cards in a micro
channel bus. This identifier can be read by the system software to determine
the system configuration.
For more information and the action to take for each of these errors, run the
test programs that came with your system.
ΓòÉΓòÉΓòÉ 40. Error Log Entry Help ΓòÉΓòÉΓòÉ
This window shows the data that is specific to the selected error entry.
The types of errors that may be encountered include the following:
Memory Parity
A parity error occurred when memory-module kits on the system board
were accessed. This error usually indicates a memory-module kit
failure.
Channel Check
A channel check was detected by one of the adapters installed in
this system. This usually indicates a failure of the adapter that
caused the channel check.
Watch Dog Timeout
An application program failed to respond within a specified time
period. This error usually indicates an application program
failure.
Bus Timeout
An error occurred during a data transfer by a device. The device
did not release control of the channel after being preempted by the
processor board. This error usually indicates a failure of either a
device or the processor board.
Unknown
An error other than those listed above has occurred.
The Multiple Log Counter shows the number of additional errors of the same
type that occurred after the original error was stored. The date and time of
the most recent error occurrence is displayed.
For more information and the action to take for each of these errors, run the
test programs that came with your system.
ΓòÉΓòÉΓòÉ 41. Error Log Entry Help ΓòÉΓòÉΓòÉ
This window shows the data that is specific to the selected error entry.
The following is a list of error types that may be encountered with a
description of probable cause:
Processor Cache
A parity error occurred when the cache memory on the processor board
was accessed. This error usually indicates a processor board cache
failure.
Processor Board Replaced
The processor board was replaced by a processor board of the same
type.
System Error Restart
An error was generated during the POST because an unexpected system
restart occurred. This error usually indicates an operating system
or application program failure.
Memory Parity or Non-Address Memory Parity
A parity error occurred when memory-module kits on the system board
were accessed. This error usually indicates a memory-module kit
failure.
POST-Detected Memory
The POST detected an uncorrectable error in one of the memory-module
kits on the system board. This error usually indicates a
memory-module kit failure.
Memory ECC Multi-bit
An uncorrectable error occurred when memory-module kits on the
system board were accessed. This error usually indicates a
memory-module kit failure.
Memory ECC Single-bit Trigger Level
An excessive number of correctable errors occurred when the
memory-module kits on the system board were accessed. This error
usually indicates a memory-module kit failure.
Channel Check
A channel check was detected by one of the adapters installed in
this system. This usually indicates a failure of the adapter that
caused the channel check.
Watch Dog Timeout
An application program failed to respond within a specified time
period. This error usually indicates an application program
failure.
Bus Timeout
An error occurred during a data transfer by a device. The device
did not release control of the channel after being preempted by the
processor board. This error usually indicates a failure of either a
device or the processor board.
DMA Programming
An error was detected by the system DMA controller. This error
usually indicates an operating system or application program
failure.
System Parity
A parity error occurred on the processor board. This error usually
indicates a processor board failure.
Voltage
The voltage provided by the system-unit power supply to the
processor board was found to be out of tolerance. This error
usually indicates either a processor board or power supply failure.
Invalid Configuration
An error was detected, but the error type could not be determined.
This error usually indicates a failure of the processor board.
System Security
An error was generated during the POST because an invalid password
was tried 3 times before the system was halted. Ensure the system
has not been tampered with.
Unknown
An error other than those listed above has occurred.
The Multiple Log Counter shows the number of additional errors of the same
type that occurred after the original error was stored. The date and time of
the most recent error occurrence is displayed.
For more information and the action to take for each of these errors, run the
test programs that came with your system.
ΓòÉΓòÉΓòÉ 42. Disk Information Help ΓòÉΓòÉΓòÉ
This function provides information about the disks that are attached to your
system. Information is provided about the drive and the media that it holds.
Unfortunately, some drives with removable media cannot be determined unless
media is present. To get the maximum information, make sure all drives have
valid media. Any drive that supports removable media will be redetermined if
information for that drive is chosen after switching media. Choose one of the
buttons on this menu for more information on:
o Physical Drives
o Logical Drives
o Diskette Drives
o Startup Sequence
o NetWare Volumes
ΓòÉΓòÉΓòÉ 43. Physical Drives Help ΓòÉΓòÉΓòÉ
This window displays a list of all hard drives attached locally to your system.
The size of each drive is given in megabytes and million bytes. A million bytes
is 1000 * 1000 bytes which is the more often used term in describing a hard
drive. Click on any of the icons to display drive partitions.
ΓòÉΓòÉΓòÉ 44. NetWare Volumes Help ΓòÉΓòÉΓòÉ
This window displays a list of all NetWare** volumes mounted on the local
server. Click on any of the icons to display the volume information.
ΓòÉΓòÉΓòÉ 45. NetWare Volume Information Help ΓòÉΓòÉΓòÉ
This window displays information on the NetWare** volume chosen from the menu.
Information displayed includes:
Volume Name
This is the name of the volume.
Volume Number
This is the number assigned to the volume by NetWare**.
Logical Drive Number
This the number of the logical drive associated with this volume.
Sectors Per Block
This is the number of 512 byte sectors in a volume block.
Total Blocks
This is the total number of blocks that this volume contains.
Available Blocks
This is the number of volume blocks available for allocation.
Volume Size
This is the size of the volume in Kilobytes
Available Space
This is the amount of available space on the drive in bytes.
Total Directory Slots
This is the total number directory slots available on the volume.
Available Directory Slots
This is the number of free directory slots on the volume.
Maximum Directory Slots Used
This is the maximum number of directory slots used on the volume.
Performs Hashing
If enabled, the file system will employ hashing techniques to speed
up access to the volume data.
Volume Removable
If true, the volume can be physically removed from the server.
Volume Mounted
If true, the volume is currently mounted on the server.
Purgable Blocks
This is the number of blocks that can be purged from the server
NonPurgable Blocks
This is the number of blocks that have recently been deleted. After
a certain amount of time, the blocks will be become purgable.
ΓòÉΓòÉΓòÉ 46. Disk Partitions Help ΓòÉΓòÉΓòÉ
This window displays the four primary partitions for the chosen hard drive.
Partitions are used to separate a hard drive into smaller units which can be
assigned drive letters. Every hard drive has these four partitions, although
only one primary partition may be active at a time.
The active primary partition is always given the first available drive letter.
Therefore the active primary partition on drive 1: will always be your drive
C:. If you have other hard drives that have active primary partitions, they
will be given the next available drive letter. All other primary partitions on
the hard drive will not be seen by the operating system. Choose one of the
items on the window for specific partition information.
ΓòÉΓòÉΓòÉ 47. Partition Information Help ΓòÉΓòÉΓòÉ
This window displays information about the chosen disk partition. Each
partition has its starting and ending locations on the disk as defined by
Heads/Sectors/Cylinders. The remaining information will be different depending
on the type of partition chosen.
o Boot Manager Partition information
o Extended Partition information
o Primary Partition information
ΓòÉΓòÉΓòÉ 48. Boot Manager Partition Information Help ΓòÉΓòÉΓòÉ
Boot Manager is a feature of FDISK that allows a choice of which partition to
boot. Each partition may have a different operating system (like OS/2*, DOS or
AIX) or different versions of the same operating system (DOS 5.0 or DOS 4.0).
The partitions may be on any hard drive in the system. Since only one primary
partition of each hard file may be assigned a drive letter, a partition will be
hidden unless it is chosen as the partition to boot. Any logical partition may
be chosen with no conflicts.
The window displays these items about the partitions under Boot Manager
control:
Drive
Physical drive number where the partition is located.
Name
User defined alias for the partition.
Partition Type
Displays whether the partition is primary or extended.
Drive Letter
Current drive letter assigned to the partition or hidden if the
primary partition was not booted.
Default
Last partition booted. This will be the default the next time Boot
Manager is used.
If more than one Boot Manager partition is found in your system, only the
partition found on the lowest number disk drive will be displayed.
ΓòÉΓòÉΓòÉ 49. Extended Partition Information Help ΓòÉΓòÉΓòÉ
The extended partition is a special type of primary partition. The extended
partition consists of logical partitions. All logical partitions on a hard
drive may be assigned drive letters.
Assignments of drive letters go first to the primary partitions. All drives are
searched in numerical order (1:, 2:) for active primary partitions. Drive
letters are assigned to these partitions if the partition is recognized by the
operating system. The disks are searched in the same order for extended
partitions. Drive letters are then assigned to each logical partition defined
that is recognized by the operating system.
The first starting and ending Heads/Sectors/Cylinders are for the entire
extended partition. Each logical partition has its own set and lists a drive
letter if one has been given by the operating system. Choose this item for
more information.
ΓòÉΓòÉΓòÉ 50. Primary Partition Information Help ΓòÉΓòÉΓòÉ
Each hard drive has four primary partitions defined and usable by FDISK. Only
one of these partitions may be assigned a drive letter by the operating system.
If there is one assigned, it is listed in the window. Choose this item for
more information.
ΓòÉΓòÉΓòÉ 51. Heads/Sectors/Cylinders Help ΓòÉΓòÉΓòÉ
On older drives, the starting and ending head/sector/cylinder describes the
physical location of the partition on the hard drive. On some newer drives,
the location is logical instead of physical.
A hard drive is really a set of platters of readable media. To access the
specific locations of the disk, logical rings were designed called cylinders.
Each of these rings defines a circular section of the platters. One circular
section of a platter is called a track. This track is divided into pieces
called sectors. And, finally, the head is the physical device for reading and
writing data. There are two heads for every platter of the disk. By choosing
the head, sector and cylinder, you can access any physical location on the
disk.
ΓòÉΓòÉΓòÉ 52. Logical Drives Help ΓòÉΓòÉΓòÉ
This is a list of all available drive letters. They may be diskettes, hard
drives, external devices or network drives. Choose any for more logical drive
information.
ΓòÉΓòÉΓòÉ 53. Logical Drive Information Help ΓòÉΓòÉΓòÉ
This window displays information about the chosen logical drive. If a disk is
unknown, close the Logical Drive Information window, put valid media in the
drive, then reopen the information window. Some removable media devices cannot
be detected without media in the drive.
Volume
Volume label assigned to the media in the drive.
File System Name
Type of file system that controls the device. For example: LAN,
FAT, HPFS, or CDFS.
File System Attach Name
If the drive is not local to your machine, connected possibly by a
LAN, this is the name of that device.
Drive Type
This may be Resident Character device, Pseudo Character device,
Local or Remote device.
Sectors Per Cluster
How many sectors are in the smallest unit the file system will
allocate for a file.
Disk Size
Maximum available space on the media.
Available Space
Remaining space on the media.
Bytes Per Sector
Amount of bytes allocated for each sector of the disk.
Volume Attributes
Various attributes supported by the file system, such as long
filenames, Unicode in filenames, case-sensitive filenames,
file-based compression, enforced Access-control Lists(ACLs).
ΓòÉΓòÉΓòÉ 54. Startup Sequence Help ΓòÉΓòÉΓòÉ
This window displays the search order the machine will use when trying to find
bootable media. On IBM* machines later than the PS/2* Model 70 and 80, the
default boot path may be altered under the Set Features menu from your
reference diskette. If your machine does not support this feature, the choice
will not appear on the menu. The default boot sequence is:
o Diskette Drive 0
o First Physical Hard Drive
o RPL
If no bootable media is found in a device, the machine looks to the next
device in the list.
Drive letters may change when the first diskette or the first hard file is not
booted. If you choose to boot another diskette drive, that drive will become
drive A: and the drive that was A: is assigned the letter the other drive had
previously. Choose one of the physical devices to show its current drive
letter. This option is only valid on newer IBM* machines.
RPL (Remote Program Load) is a function used with LAN (Local Area Network)
stations. The station gets bootable media sent across the LAN from a server.
This option is usually set when the machine is to look like a terminal
attached to the server through the LAN.
ΓòÉΓòÉΓòÉ 55. Component CSD Level Information ΓòÉΓòÉΓòÉ
The Component CSD Level Information window displays details about the current
revision of a given component. This information includes CSD level, component
ID, and version number.
ΓòÉΓòÉΓòÉ 56. Component CSD Level Information ΓòÉΓòÉΓòÉ
The Component CSD Level Information window displays details about the revision
of a given component, including the following:
Version
This is the version number of the given component.
Component ID
This is the ID number for the given component.
Current CSD Level
This is current CSD (Customer Service Diskette) level of the given
component.
Previous CSD Level
This is CSD (Customer Service Diskette) level of the given component
which was replaced by the current CSD.
ΓòÉΓòÉΓòÉ 57. Help for Print All System Data to File ΓòÉΓòÉΓòÉ
Use the Print All System Data to File to generate a textual report of all of
the system configuration data which has been collected by the System
Information Tool to a user selected file. The user is given a standard file
dialog to select the file name.
ΓòÉΓòÉΓòÉ 58. Help for Print All System Data to Printer ΓòÉΓòÉΓòÉ
Use the Print All System Data to Printer to generate a textual report of all of
the system configuration data which has been collected by the System
Information Tool to the default printer.
ΓòÉΓòÉΓòÉ 59. Help for Help Menu ΓòÉΓòÉΓòÉ
Use the choices on the Help menu to display:
o An index of references to the help topics for the active program
o General information about the contents of the active window
o General information about the help facility
o A list and description of the keys you can use
o Product information for the active program
ΓòÉΓòÉΓòÉ 60. Help for Help Index ΓòÉΓòÉΓòÉ
Use Help Index to display an alphabetic list of references to the help topics
in the active program.
Note: To see all text of the index entries, maximize the Index window.
You can select an index entry to display the help topic that is related to that
index entry.
ΓòÉΓòÉΓòÉ 61. Help for General Help ΓòÉΓòÉΓòÉ
Use General Help to display information about the contents of the active
window.
ΓòÉΓòÉΓòÉ 62. Help for Using Help ΓòÉΓòÉΓòÉ
Use Using Help to find out how to use the help facility.
ΓòÉΓòÉΓòÉ 63. Help for Keys Help ΓòÉΓòÉΓòÉ
Use Keys Help to display a description about each key you can use in the active
program.
ΓòÉΓòÉΓòÉ 64. Help for Product Information ΓòÉΓòÉΓòÉ
Use Product Information to display the ownership information for the active
program.
ΓòÉΓòÉΓòÉ 65. Help for Print Subsystem Data to File ΓòÉΓòÉΓòÉ
Use the Print Subsystem Data to File to generate a textual report of all of the
configuration data which has been collected by the System Information Tool for
the subsystem presented in the active window. The report is generated to a
user selected file. The user is given a standard file dialog to select the
file name.
ΓòÉΓòÉΓòÉ 66. Help for Print Subsystem Data to Printer ΓòÉΓòÉΓòÉ
Use the Print Subsystem Data to Printer to generate a textual report of all of
the configuration data which has been collected by the System Information Tool
for the subsystem presented in the active window. The report is generated to
the default printer.
ΓòÉΓòÉΓòÉ 67. General SCSI Subsystem Information ΓòÉΓòÉΓòÉ
The SCSI Information window displays information about the Small Computer
Systems Interface (SCSI) resident on your computer. It describes the adapters
and devices that employ SCSI. SCSI can cover a wide range of peripheral device
types.
ΓòÉΓòÉΓòÉ 68. SCSI Subsystem Information ΓòÉΓòÉΓòÉ
The SCSI Information window depicts the actual layout of SCSI adapters and
devices on your system. Cable connections, adapters, and devices are
accurately described along with pertinent data.
ΓòÉΓòÉΓòÉ 69. General ESDI Subsystem Information ΓòÉΓòÉΓòÉ
The ESDI Information window displays information about the Enhanced Small
Device Interface (ESDI) fixed disk adapters and devices resident on your
computer. ESDI is a fixed disk (hard disk) interface.
ΓòÉΓòÉΓòÉ 70. ESDI Subsystem Information ΓòÉΓòÉΓòÉ
The ESDI Information window depicts the actual layout of ESDI adapters and
devices on your system. Cable connections, adapters, and fixed disks are
accurately described along with pertinent data.
ΓòÉΓòÉΓòÉ 71. ESDI Adapter Information ΓòÉΓòÉΓòÉ
The ESDI Information window displays ESDI adapter information. ESDI, or
Enhanced Small Devices Interface, is primarily a fixed disk controller.
The ESDI Adapter Information window displays specific information about the
adapter and provides selections to obtain specific information about devices it
controls.
Adapter Type
Name of the ESDI adapter as reported by the adapter.
Bus Type
Several protocol versions exist. ST506 CAM I and CAM II (both
Direct Access Storage Device (DASD) types), ESDI - also DASD,
Floppy, SCSI I, II, and III. Unknown protocols will show unknown.
Location
The slot of the adapter or controller is given. If the adapter
resides on the computer's main board, the System Board Controller
will be indicated.
Bus Attributes
Signifies the bus width. Available options are FAST SCSI, 8, 16, and
32 bit.
I/O Access
Indicates how I/O access is controlled. Available options are Bus
Master (DMA Master), PIO (Programmed I/O - also known as I/O
mapped), DMA Slave (DMA Slave), Memory mapped I/O, and Unknown I/O.
Host Bus
Bus type of the computer. Available options are ISA, Extended ISA,
Micro Channel*, Not Listed, Unknown, and Other.
Host Bus Width
Width in bits of the host computer. Available options are 8, 16,
24, 32, and unknown.
Arbitration Level
Level that determines how conflicts for the bus are resolved. The
lower the number, the higher the priority.
Fairness
Indicates if the adapter agrees to abide by a ruling allowing for
sharing of the bus and, thus, access to system resources.
Wait
Indicates that the adapter will wait when contention for the bus
exists.
Adapter Attributes
Adapter Attributes shows addressing information about the adapter.
Addressing indicates if the unit is capable of addressing addresses
greater than 16 Megabytes.
SCB indicates if IBM SCB support is provided. If so, the device can
be controlled through formatted SCB commands.
Scatter/Gather indicates if the adapter supports scatter/gather in
hardware. Otherwise, the scatter/gather is emulated with software.
Scatter/Gather is the idea of requesting multiple reads and writes
at one time and letting the adapter take care of the details of how
those operations are carried out.
CHS Addressing indicates if Cylinder/Head/Sector addressing is
supported.
Maximum Scatter/Gather List
Shows the maximum number of elements supported in a single hardware
scatter/gather list.
Maximum CDB Length
Shows the maximum Control Data Block transfer length, in bytes, that
is supported by this adapter.
ADD Major Level
Shows the ADD Major level in the current operating system.
ADD Minor Level
Shows the ADD Minor level in the current operating system.
Devices Connected
The number of devices connected to this particular adapter. The
devices listed are available for further information.
ΓòÉΓòÉΓòÉ 72. ESDI Device Information ΓòÉΓòÉΓòÉ
The ESDI Device Information window displays specific information about the ESDI
fixed disk device being controlled by the ESDI controller (adapter) on your
machine.
Device Type
Indicates the ESDI device type. Available choices are Direct Access
Device (DASD), Fixed Disk, Tape Device (Tape Drive), Printer Device,
Processor Device (connection to another adapter on a separate
machine), Write Once Read Many (WORM), Compact Disk Read Only Memory
(CD-ROM), Scanner Device, Optical Disk Device, Change Device (i.e.
Optical Disk Juke Box), Communication Device (modem).
Device Size
Indicates the device's size in bytes.
Unit Status
Indicates the current status of the device. Available options are
Device Ready, Device Powered Off, Device Defective, and Unknown.
Media Status
Indicates if media is currently in the drive.
Device Filter ADD
Indicates if a filter ADD is present. A filter ADD performs an
operation or task on data as it travels between the device and the
operating system.
Device Queuing Commands
Indicates the recommended number of commands to queue for this
device.
Device Attributes
Indicates if media can be removed from the device. This may not
apply to all devices.
Device Attributes
Indicates if the device can detect removal of media.
Device Attributes
Indicates if the device supports read prefetch.
ΓòÉΓòÉΓòÉ 73. General IDE Subsystem Information ΓòÉΓòÉΓòÉ
The IDE Information window displays information about the Seagate Technologies
506 Interface (ST506) or Integrated Drive Electronics (IDE) fixed disk adapters
and devices. ST506/IDE is a fixed disk (hard disk) interface.
ΓòÉΓòÉΓòÉ 74. IDE Subsystem Information ΓòÉΓòÉΓòÉ
The ST506/IDE Information window depicts the actual layout of ST506/IDE
adapters and fixed disk devices on your system. Cable connections, adapters,
and fixed disks are accurately described along with pertinent data.
ΓòÉΓòÉΓòÉ 75. IDE Adapter Information ΓòÉΓòÉΓòÉ
The ST506/IDE Information window displays IDE adapter information. Detailed
information about the IDE adapter is shown. Help is available to clarify
unknown terms. Seagate Technologies ST506 drives are also covered here and
are, in fact, handled by the computer in the same way.
Adapter Type
Name of the IDE adapter as reported by the adapter.
Bus Type
Several protocol versions exist. ST506 CAM I and CAM II (both
Direct Access Storage Device (DASD) types), ESDI - also DASD,
Floppy, SCSI I, II, and III. Unknown protocols will show unknown.
Location
The slot of the adapter or controller is given. If the adapter
resides on the computer's main board, the System Board Controller
will be indicated.
Bus Attributes
Signifies the bus width. Available options are FAST SCSI, 8, 16, and
32 bit.
I/O Access
Indicates how I/O access is controlled. Available options are Bus
Master (DMA Master), PIO (Programmed I/O - also known as I/O
mapped), DMA Slave (DMA Slave), Memory mapped I/O, and Unknown I/O.
Host Bus
Bus type of the computer. Available options are ISA, Extended ISA,
Micro Channel*, Not Listed, and Unknown.
Host Bus Width
Width in bits of the host computer. Available options are 8, 16,
24, 32, and unknown.
Arbitration Level
Level that determines how conflicts for the bus are resolved. The
lower the number, the higher the priority.
Fairness
Indicates if the adapter agrees to abide by a ruling allowing for
sharing of the bus and, thus, access to system resources.
Wait
Indicates that the adapter will wait when contention for the bus
exists.
Adapter Attributes
Adapter Attributes shows addressing information about the adapter.
Addressing indicates if the unit is capable of addressing addresses
greater than 16 Megabytes.
SCB indicates if IBM SCB support is provided. If so, the device can
be controlled through formatted SCB commands.
Scatter/Gather indicates if the adapter supports scatter/gather in
hardware. Otherwise, the scatter/gather is emulated with software.
Scatter/Gather is the idea of requesting multiple reads and writes
at one time and letting the adapter take care of the details of how
those operations are carried out.
CHS Addressing indicates if Cylinder/Head/Sector addressing is
supported.
Maximum Scatter/Gather List
Shows the maximum number of elements supported in a single hardware
scatter/gather list.
Maximum CDB Length
Shows the maximum Control Data Block transfer length, in bytes, that
is supported by this adapter.
ADD Major Level
Shows the ADD Major level in the current operating system.
ADD Minor Level
Shows the ADD Minor level in the current operating system.
Devices Connected
The number of devices connected to this particular adapter. The
devices listed are available for further information.
ΓòÉΓòÉΓòÉ 76. IDE Device Information ΓòÉΓòÉΓòÉ
The IDE Device Information window displays specific information about the IDE
fixed disk devices on your system.
Device Type
Indicates the IDE device type. Available choices are Direct Access
Device (DASD), Fixed Disk, Tape Device (Tape Drive), Printer Device,
Processor Device (connection to another adapter on a separate
machine), Write Once Read Many (WORM), Compact Disk Read Only Memory
(CD-ROM), Scanner Device, Optical Disk Device, Change Device (i.e.
Optical Disk Juke Box), Communication Device (modem).
Device Size
Indicates the device's size in bytes.
Unit Status
Indicates the current status of the device. Available options are
Device Ready, Device Powered Off, and Device Defective.
Media Status
Indicates if media is currently in the drive.
Device Filter ADD
Indicates if a filter ADD is present. A filter ADD performs an
operation or task on data as it travels between the device and the
operating system.
Device Queuing Commands
Indicates the recommended number of commands to queue for this
device.
Device Attributes
Indicates if media can be removed from the device. This may not
apply to all devices.
Device Attributes
Indicates if the device can detect removal of media.
Device Attributes
Indicates if the device supports read prefetch.
ΓòÉΓòÉΓòÉ 77. Diskette Device Information ΓòÉΓòÉΓòÉ
The Diskette Device Information window displays specific information about the
diskette and diskette media on your system.
Device Type
Indicates the diskette type.
Device Size
Indicates the device's size in bytes.
Unit Status
Indicates the current status of the device. Available options are
Device Ready, Device Powered Off, and Device Defective.
Media Status
Indicates if media is currently in the drive.
Device Filter ADD
Indicates if a filter ADD is present. A filter ADD performs an
operation or task on data as it travels between the device and the
operating system.
Device Queuing Commands
Indicates the recommended number of commands to queue for this
device.
Device Attributes
Indicates if media can be removed from the device. This may not
apply to all devices.
Device Attributes
Indicates if the device can detect removal of media.
Device Attributes
Indicates if the device supports read prefetch.
ΓòÉΓòÉΓòÉ 78. Unknown Disk Subsystem Information ΓòÉΓòÉΓòÉ
An unknown parameter or data field indicates a protocol or data that is
unrecognized by the system. Occasions may arise when new system data is not
recognized by older systems and programs. Thus, it is classified as Unknown.
ΓòÉΓòÉΓòÉ 79. Memory Information Help ΓòÉΓòÉΓòÉ
The Memory Information window displays information about the amount of memory
installed and available in the system. On PS/2* products, more detailed
information about the type, size and speed of memory is available.
ΓòÉΓòÉΓòÉ 80. Memory Choices Help ΓòÉΓòÉΓòÉ
This window provides choices for more information about the different aspects
of the memory sub-system in use by this system.
Memory Controller Information
This choice provides a list of information regarding the memory
controller for this system.
Physical Memory Array Information
This choice provides a list of information regarding the physical
memory array for this system.
Memory Module Information
This choice provides a list of installed memory modules in this
system.
Memory address ranges recognized by this system
This choice provides the amount and address of both system and
reserved memory.
Installed Memory Amounts
This choice provides the amounts of both physical and virtual memory
installed.
ΓòÉΓòÉΓòÉ 81. Memory Controller Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the system memory controller.
ΓòÉΓòÉΓòÉ 82. Memory Controller Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the memory controller in this
system.
Supported Interleave
This choice provides a list of interleaved memory types supported by
the memory controller in this system.
Current Interleave
This choice provides the current interleave memory method used by
the memory controller.
Maximum Memory Module Size
This choice provides the size of the largest memory module supported
by this controller.
Number of Associated Memory Slots
This choice provides the number of memory modules supported by this
controller for this system.
Memory Module Voltage
This choice provides a list of the required voltages for the memory
modules sockets controlled by this controller. Settings of multiple
voltages indicates that the sockets are configurable.
Error Detecting Method
This choice provides the memory controller error detecting method
supported by this controller.
Error Correcting Capability
This choice provides the memory controller error correcting
capability supported by this controller.
Memory Speed Supported
This choice provides a list of the memory modules speeds supported
by the system.
Memory Module Supported
This choice provides a list of the memory modules types supported by
the system.
ΓòÉΓòÉΓòÉ 83. Physical Memory Array Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the physical memory array in the
system.
ΓòÉΓòÉΓòÉ 84. Physical Memory Array Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the physical memory array in this
system.
Location of Memory Array
This choice provides the physical location of the memory array,
whether on the system board or an add-in board.
Memory Array Use
This choice identifies the functions for which the array is used,
such as system memory, video memory, flash memory, NVRAM, or cache
memory.
Error Correction Type
This choice provides the primary hardware error correction or
detection method supported by this memory array.
Maximum Memory Capacity
This choice provides the maximum memory capacity, in kilobytes, for
this array.
Number of Memory Devices
This choice provides the number of slots or sockets available for
memory devices in this array.
Bank Locator
This choice provides a list of the slots or sockets in use or
available for use in this array.
ΓòÉΓòÉΓòÉ 85. Memory Device Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the memory devices.
ΓòÉΓòÉΓòÉ 86. Memory Device Information Help ΓòÉΓòÉΓòÉ
This window shows the modules that are currently installed in this system or
the memory device sockets available for use.
Bank Location
This is the string that identifies the physically labeled bank where
the memory device is located, for example "Card 1, Bank 1".
Device Location
This is the string that identifies the physically labeled socket or
board position where the memory device is located, for example "J16"
Total Width
This identifies the total width, in bits, of this memory device,
including any check or error-correction bits. If there are no
error-correction bits, this value should be equal to data width.
Data Width
This identifies the data width, in bits, of this memory device. A
data width of 0 and a total width of 8 indicates that the device is
being used solely to provide 8 error-correction bits.
Size
This identifies the size of the memory device which installed in the
socket.
Form Factor
This describes the implementation form factor for this memory
device, for example SIMM, DIP, DIMM.
Memory Type
This describes the type of memory used in this device, for example
DRAM, SRAM, ROM.
Type Detail
This provides additional details on the memory device type, for
example CMOS, EDO.
ΓòÉΓòÉΓòÉ 87. Memory Module Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the system memory controller.
ΓòÉΓòÉΓòÉ 88. Memory Module Information Help ΓòÉΓòÉΓòÉ
This window shows the modules that are currently installed in this system.
Memory modules are physical components installed on the system board.
Megabyte refers to the size or density of a module and nanosecond refers to the
speed of a module.
Socket Designation
This is the memory module socket reference designation.
Enabled Size
This is the amount of memory currently enabled for the system's use
from the module.
Current Speed
This is speed of the memory module in nanosecond.
Current Memory Type
This describes the physical characteristics of the memory modules
which are supported by (and currently installed in) the system.
Installed Size
This identifies the size of the memory module which installed in the
socket.
Bank Connections
This describes the bank RAS connection for the memory socket.
ΓòÉΓòÉΓòÉ 89. Size and Speed of Memory Modules Help ΓòÉΓòÉΓòÉ
This window shows the modules that are currently installed in this system.
ΓòÉΓòÉΓòÉ 90. Size and Speed of Memory Modules Help ΓòÉΓòÉΓòÉ
This window shows the modules that are currently installed in this system.
Memory modules are physical components installed on the system board.
Megabyte refers to the size or density of a module and nanosecond refers to the
speed of a module.
ΓòÉΓòÉΓòÉ 91. Upgrade Memory Modules Help ΓòÉΓòÉΓòÉ
This window shows a list of upgrade memory modules that can be used in this
system.
ΓòÉΓòÉΓòÉ 92. Upgrade Memory Modules Help ΓòÉΓòÉΓòÉ
This window shows a list of upgrade memory modules that can be used in this
system.
Memory modules are physical components installed on the system board.
Megabyte refers to the size or density of a module and nanosecond refers to the
speed of a module.
ΓòÉΓòÉΓòÉ 93. Memory Values Help ΓòÉΓòÉΓòÉ
The Memory Values window displays a variety of data about the physical and
virtual memory installed in the system.
ΓòÉΓòÉΓòÉ 94. Memory Values Help ΓòÉΓòÉΓòÉ
The Memory Values window displays a variety of data about the physical and
virtual memory installed in the system, including:
Physical memory
This is the amount of physical memory detected by the operating
system.
Locked memory
This is the amount locked or reserved for use by the operating
system and device drivers.
Virtual memory
This is the amount of virtual memory. The operating system can use
some of a system's disk space as system memory. This allows the
operating system to address more memory than the amount of physical
memory installed.
Page size
This refers to the size of one page of memory in this version of the
operating system on this system.
Usable memory
This refers to the total of base memory and extended memory that can
be used by the operating system.
Base memory
This refers to memory under 1 MB that is usually used by DOS and its
applications.
Extended memory
This refers to memory that resides above 1 MB.
System board memory
This refers to the amount of memory that is installed on the system
board in memory connectors.
Adapter memory
This refers to memory that is installed in the Micro Channel* on
adapter cards.
Cacheable memory
This refers to both system board and adapter card memory, which can
be cached by a system cache.
ΓòÉΓòÉΓòÉ 95. Memory Ranges Help ΓòÉΓòÉΓòÉ
The Memory Ranges window displays a variety of information about the amount and
address of both system and reserved memory.
ΓòÉΓòÉΓòÉ 96. Memory Ranges Help ΓòÉΓòÉΓòÉ
The Memory Ranges window displays a variety of information about the amount and
address of both system and reserved memory, including:
Memory map under 1 MB
This shows the regions into which the base megabyte of memory is
divided.
System RAM
This is the RAM that can be used freely by operating systems or
applications.
Video RAM
This is the memory that is reserved for use by the video sub-system.
Adapter ROM
This is the address range reserved for use by Micro Channel*
adapters.
System ROM
This is the read only memory that contains the microcode for the
system.
Memory map below 16 MB
This shows the address range for any system RAM and the address
range for any reserved memory.
Reserved memory
This refers to address ranges that have been reserved for use by
Micro Channel* adapters and various system hardware resources.
Memory map above 16 MB
This displays similar information for this region.
ΓòÉΓòÉΓòÉ 97. BIOS Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the system BIOS.
ΓòÉΓòÉΓòÉ 98. BIOS Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the system BIOS.
BIOS Vendor
This shows the system BIOS Vendor's name.
BIOS Version
This provides the BIOS version information.
BIOS Starting Address
This provides the segment location of the BIOS starting address.
BIOS ROM Size
This provides the size of the physical device containing the BIOS,
in bytes.
BIOS is Upgradeable (Flash)
This indicates if the system BIOS is upgradeable by flashing.
BIOS shadowing is allowed
This indicates if the system BIOS is able to be shadowed (The
transfer of ROM code into RAM, where the ROM is masked out of the
address space and the RAM is overlaid by the initial ROM address
region. All ROM accesses are now redirected to the faster operating
RAM.)
BIOS ROM socketed
This indicates if the system BIOS ROM is socketed.
Boot Options Supported
This provides a list of the Boot Options supported by this system.
BIOS Functions Supported
This choice provides a list of the BIOS functions supported by this
system.
ΓòÉΓòÉΓòÉ 99. BIOS Functions Supported Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the BIOS Functions supported in
this system.
ΓòÉΓòÉΓòÉ 100. BIOS Functions Supported Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the BIOS Functions supported in
this system.
ISA BIOS Supported
This indicates if the system BIOS supports ISA BIOS calls.
MCA BIOS Supported
This indicates if the system BIOS supports MCA BIOS calls.
EISA BIOS Supported
This indicates if the system BIOS supports EISA BIOS calls.
PCI BIOS Supported
This indicates if the system BIOS supports PCI BIOS calls.
PCMCIA BIOS Supported
This indicates if the system BIOS supports PCMCIA BIOS calls.
PnP BIOS Supported
This indicates if the system BIOS supports PnP BIOS calls.
VL-VESA BIOS Supported
This indicates if the system BIOS supports VL-VESA BIOS calls.
APM BIOS Supported
This indicates if the system BIOS supports APM BIOS calls.
ESCD BIOS Supported
This indicates if the system BIOS supports ESCD BIOS calls.
EDD BIOS Supported
This indicates if the system BIOS supports EDD BIOS calls.
Int 10h - CGA Video Services Supported
This indicates if the system BIOS supports Int 10h - CGA Video
Service BIOS calls.
PC-98 Supported
This indicates if the system supports PC-98 specification.
ACPI Supported
This indicates if the system BIOS supports ACPI specification.
USB Supported
This indicates if the system BIOS supports USB specification.
AGP Supported
This indicates if the system BIOS supports AGP specification.
LS-120 Supported
This indicates if the system BIOS supports LS-120 specification.
ΓòÉΓòÉΓòÉ 101. Processor Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the system processors.
ΓòÉΓòÉΓòÉ 102. Processor Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the system processors.
Socket Designation
This provides a Reference Designation string for the processor in
this system.
Processor Type
This indicates the type of processor (i.e. Central Processor, Math
Processor, DSP Processor, Video Processor, etc.).
Processor Family
This indicates the processor family (i.e. 80486, Pentium (tm) Pro,
Pentium (tm) II, etc.).
Processor Manufacturer
This provides the name of the processor manufacturer.
Processor Version
This provides the processor version information
Processor ID
This provides the processor-specific information which describes the
processor's features.
Processor Voltage
This choice provides a list of the supported voltages for processor
socket in this system. Settings of multiple voltages indicates that
the socket is configurable.
External Clock Frequency
This provides the external clock frequency in MHz.
Maximum internal processor speed supported
This provides the maximum internal processor speed, as supported by
this system.
Current internal processor speed supported
This provides the current internal processor speed, as supported by
this system.
Processor Upgrade
This provides the method of processor upgrade supported by this
system.
ΓòÉΓòÉΓòÉ 103. Cache Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the CPU cache device.
ΓòÉΓòÉΓòÉ 104. Cache Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the CPU cache device. L1 indicates
the information is for the level 1 cache. L2 indicates the information is for
the level 2 cache. And L3 indicates information for the level 3 cache.
Socket Designation
This provides a Reference Designation string for the cache in this
system.
Cache Configuration
This indicates the operational mode of the cache, status at boot
time, the location, relative to the CPU, and if the cache is
socketed.
Maximum Cache size
This provides the maximum cache size that can be installed in this
system.
Installed Cache size
This provides current installed cache size in this system.
Supported SRAM Type
This indicates the type of SRAM (static RAM) supported by the cache.
Current SRAM Type
This indicates current SRAM type used by the cache in this system.
Cache Speed
This provides the cache module speed in nanoseconds.
Error Correction Type
This indicates the type of error correction scheme supported by this
cache module.
System Cache Type
This indicates the logical type of cache.
Associativity
This indicates the associativity of the cache.
ΓòÉΓòÉΓòÉ 105. Help for Video Subsystem Information ΓòÉΓòÉΓòÉ
The Video Subsystem Information window displays a variety of data about a video
subsystem present in the system. This information includes amount of video
memory, I/O ports used, display type, and supported video modes.
ΓòÉΓòÉΓòÉ 106. Help for Video Subsystem Information ΓòÉΓòÉΓòÉ
The Video Subsystem Information window displays a variety of data about a video
subsystem present in the system. The data presented can include up to three
sections: Video Adapter Information, Video Display Information, and Supported
Video Modes.
The Adapter Information section presents the configuration of the video card or
adapter itself. The data presented can include the following:
Video Adapter Type
This is the general type of adapter installed. Unusual video
adapters may be identified as the type of standard adapter they most
functionally resemble.
Video Memory
This is the amount of video memory, in kilobytes, configured for use
by the adapter. The amount of video memory can affect which video
modes are useable by the adapter.
XGA Instance
This identifies which of the eight unique XGA instances (0-7) is
being used by the adapter. Each XGA (or XGA-like) video subsystem
must have a unique instance number to prevent conflicts. Certain
other video subsystems, such as VGA+, use a subset of the XGA
architecture, and must have an XGA instance to prevent conflict with
other XGAs.
I/O Port Range
This is the set of I/O (input/output) ports used by the adapter.
1 MB Aperture Location
Used on XGA-type video subsystems, this is the location of a 1 MB
"window" into the XGA adapter's video memory. This aperture is
typically disabled on 32-bit machines, which use the 4 MB Aperture.
4 MB Aperture Location
Used on XGA-type video subsystems, this is the location of a 4 MB
"window" into the XGA adapter's video memory. This aperture is
typically disabled on 16-bit machines, which use the 1 MB Aperture.
This aperture allows the system access to all the video memory on
the XGA adapter.
Video Memory Location
Used on XGA-type video subsystems, this is the logical location of
the video adapter's video memory. This is the address range used by
the video adapter itself when addressing its video memory. If the 4
MB Aperture is enabled, the two ranges will be the same.
Coprocessor Location
Used on XGA-type video subsystems, this is the location of the
memory-mapped graphics coprocessor registers for this video adapter.
These registers are used for sending commands to the XGA's video
coprocessor.
The Video Display Information section identifies a number of characteristics
of the video display:
Video Display Type
This is the name of the video display, or the name of the standard
display which is most similar to the primary video display. A
mismatch between this data and the actual display may indicate that
the display identifies itself as one of the standard displays, or
that the operating system is configured for another type of display.
Screen Size
These are the physical dimensions of the screen of the video
display. The values returned represent the horizontal and vertical
dimensions of the screen, in millimeters. A mismatch between this
data and the size of actual display may indicate that the display
identifies itself as one of the standard displays, or that the
operating system is configured for another type of display.
The Supported Video Modes section identifies a number of video modes supported
by the combination of the video adapter and the video display. Information
about each of these modes can be accessed by selecting the item.
ΓòÉΓòÉΓòÉ 107. Help for Video Mode Information ΓòÉΓòÉΓòÉ
The Video Mode Information window displays a variety of data about a video mode
supported by a video subsystem. This information includes the resolution of the
mode, several mode attributes, and the refresh rate of the mode (if available).
ΓòÉΓòÉΓòÉ 108. Help for Video Mode Information ΓòÉΓòÉΓòÉ
The Video Mode Information window displays a variety of data about a video mode
supported by a video subsystem. This information includes the following:
Screen Resolution
These are the horizontal and vertical resolutions of the video mode,
in pixels.
Mode Attributes
This data indicate other characteristics of the video mode. These
attributes include:
Borderless
This indicates that the video information presented
while this mode is active will fill the screen,
leaving no border between the data and the physical
edge of the display.
Non-Interlaced
This indicates that the video adapter will redraw all
lines of data on the screen each time the screen is
refreshed. This can help prevent screen flicker.
Interlaced
This indicates that the video adapter will redraw a
fraction of the lines of data on the screen each time
the screen is refreshed (usually 1/2 of the lines).
This often allows higher resolutions to be displayed.
Refresh Rate
This is the number of screen refreshes which will occur each second,
in Hertz.
Pixel Rate
This is the number of pixels the adapter will draw on the screen
each second when this mode is active.
Scan Line Rate
This is the number of scan lines, or rows of pixels, the adapter
will draw on the screen each second when this mode is active.
Minimum XGA Level Required
This is the minimum adapter functionality needed to be able to use
this mode on the current video display.
ΓòÉΓòÉΓòÉ 109. Pixel ΓòÉΓòÉΓòÉ
A Pixel is a single dot, or point, on a video screen. It is the smallest unit
on the screen which can be "drawn" by the video adapter on the video display.
ΓòÉΓòÉΓòÉ 110. Mickey ΓòÉΓòÉΓòÉ
A Mickey is the smallest unit of movement detectable by a mouse, or other
pointing device.
ΓòÉΓòÉΓòÉ 111. Mickeys/Pixel ΓòÉΓòÉΓòÉ
This unit indicates the amount of mouse movement, in Mickeys, needed to move
the mouse cursor one Pixel
ΓòÉΓòÉΓòÉ 112. Mickeys/cm ΓòÉΓòÉΓòÉ
This unit indicates the number of units of mouse movement, in Mickeys, which
are generated by moving the mouse one centimeter.
ΓòÉΓòÉΓòÉ 113. centimeter (cm) ΓòÉΓòÉΓòÉ
1 cm = 0.01 meters
2.54 cm = 1 inch
ΓòÉΓòÉΓòÉ 114. millimeter (mm) ΓòÉΓòÉΓòÉ
1 mm = 0.001 meters
25.4 mm = 1 inch
ΓòÉΓòÉΓòÉ 115. milliseconds (msec) ΓòÉΓòÉΓòÉ
1 thousandth of a second.
1 msec = 0.001 seconds
1000 msec = 1 second
ΓòÉΓòÉΓòÉ 116. nanoseconds (nsec) ΓòÉΓòÉΓòÉ
1 billionth of a second.
1 nsec = 0.000000001 seconds
1000000000 nsec = 1 second
ΓòÉΓòÉΓòÉ 117. Megabyte (MB) ΓòÉΓòÉΓòÉ
Approximately 1 million bytes of data.
1 MB = 1024 KB = 1048576 bytes
ΓòÉΓòÉΓòÉ 118. Kilobyte (KB) ΓòÉΓòÉΓòÉ
Approximately 1 thousand bytes of data.
1 KB = 1024 bytes
ΓòÉΓòÉΓòÉ 119. Hertz (Hz) ΓòÉΓòÉΓòÉ
Hertz is a unit for measuring frequency.
1 Hz = 1 cycle/second
ΓòÉΓòÉΓòÉ 120. Megahertz (MHz) ΓòÉΓòÉΓòÉ
1 million Hertz.
1 MHz = 1000000 cycles/second
ΓòÉΓòÉΓòÉ 121. Programmable Option Select (POS) ΓòÉΓòÉΓòÉ
Programmable Option Select is the system of hardware ports and data areas used
on Micro Channel* systems for identifying and configuring adapter cards
automatically, without the need for manual switches.
ΓòÉΓòÉΓòÉ 122. Power-On Self-Test (POST) ΓòÉΓòÉΓòÉ
The built-in programs on a personal computer which are used to initialize and
test the system and its adapters prior to the start of an operating system.
ΓòÉΓòÉΓòÉ 123. SCSI ΓòÉΓòÉΓòÉ
Small Computer Systems Interface. An interface for connecting a variety of
peripheral devices to a computer.
ΓòÉΓòÉΓòÉ 124. ROM ΓòÉΓòÉΓòÉ
Read-Only Memory. This is a type of memory which contains data which cannot be
changed, and is not lost when power to a system is switched off.
ΓòÉΓòÉΓòÉ 125. RAM ΓòÉΓòÉΓòÉ
Random-Access Memory. This is a type of memory which contains data which can
be both written and read. This data is typically lost when power to the system
is switched off.
ΓòÉΓòÉΓòÉ 126. SIMM ΓòÉΓòÉΓòÉ
Single In-line Memory Module. This is a small memory card which typically
contains one or more megabytes of RAM.
ΓòÉΓòÉΓòÉ 127. PUN ΓòÉΓòÉΓòÉ
Physical Unit Number. Together with the Logical Unit Number, an adapter or
device is uniquely identified.
ΓòÉΓòÉΓòÉ 128. LUN ΓòÉΓòÉΓòÉ
Logical Unit Number. Together with the Physical Unit Number, an adapter or
device is uniquely identified.
ΓòÉΓòÉΓòÉ 129. ADD ΓòÉΓòÉΓòÉ
Adapter Device Driver. An ADD is a special program resident in the operating
system that acts as a liaison between the operating system's device manager and
the adapter and its devices.
ΓòÉΓòÉΓòÉ 130. ESDI ΓòÉΓòÉΓòÉ
Enhanced Small Devices Interface. A protocol used to communicate with Fixed
Disk Drives.
ΓòÉΓòÉΓòÉ 131. I/O ΓòÉΓòÉΓòÉ
Input / Output. A verb or adjective indicating a two-way transaction usually
of data or signals inside a computer.
ΓòÉΓòÉΓòÉ 132. IDE ΓòÉΓòÉΓòÉ
Integrated Drive Electronics. A small computer protocol used in controlling
fixed disk drives.
ΓòÉΓòÉΓòÉ 133. SCB ΓòÉΓòÉΓòÉ
Subsystem Control Blocks. A standard protocol for communication of data and
commands between the system and adapters on a Micro Channel* system.
ΓòÉΓòÉΓòÉ 134. DMA ΓòÉΓòÉΓòÉ
Direct Memory Access. A technique for transferring data within a computer
without using the microprocessor. A DMA channel is a device in a computer
which allows such a transfer to occur. A DMA controller is a collection of DMA
channels, which allows several transfers to occur at once.
ΓòÉΓòÉΓòÉ 135. Planar or System Board ΓòÉΓòÉΓòÉ
The computer's main system board or "mother board". The primary electronic
board in the system, which contains many of the system's base devices.
ΓòÉΓòÉΓòÉ 136. Video Extension ΓòÉΓòÉΓòÉ
Video Extension refers to the extra set of connectors on the Micro Channel*
slot that allows support for secondary monitors. The XGA on the system board
drives a secondary monitor through its connection to the Auxiliary Video
Extension (AVE). The XGA Adapter/A in the Base Video Extension (BVE) slot
drives signals through the connection between the BVE and the AVE. The Base
Video Extension is the driver; the Auxiliary Extension is driven.
ΓòÉΓòÉΓòÉ 137. RAS ΓòÉΓòÉΓòÉ
RAS - Row Address Strobe
A control signal for a DRAM chip which instructs the chip to accept the address
supplied as a row address, and to interpret it accordingly.
ΓòÉΓòÉΓòÉ 138. Help for Vital Product Data (VPD) ΓòÉΓòÉΓòÉ
Vital Product Data is a collection of system specific and model specific data
available on certain systems. This data can include information about the
system, system board, processor card, and adapter cards. The types of data can
include serial numbers, replacement part numbers (FRU), and manufacturing IDs.
ΓòÉΓòÉΓòÉ 139. Help for Security Information ΓòÉΓòÉΓòÉ
This window gives information on the security features present on your machine.
Power On Password
Password put on system by the user through the reference diskette or
Configuration/Setup utility program that prevents the user from
booting an operating system until the password is input.
Mechanical Case Lock
Machine has a physical lock on its covers.
Priviledged Access Password
Password set by an administrator. A user cannot boot the reference
partition or run the Configuration/Setup utility program without
first typing in this password.
Unattended Start Mode
Allows the machine to boot to an operating system but does not allow
any input from the keyboard until the power on password is input.
Tamper Detection
Prevents forcing open of the machine. If the machine is opened
without first opening the mechanical case lock, the system will post
an error and will not boot the reference partition or any operating
system until the priviledged access password is input.
ΓòÉΓòÉΓòÉ 140. Help for CONFIG.SYS Information ΓòÉΓòÉΓòÉ
This window provides information about the CONFIG.SYS. file. The actual
content of the file is presented, along with the time, date, and size of any
file associated with a given line in the CONFIG.SYS file. For instance, the
line DEVICE=C:\TAPE\TAPE.SYS would have the time, date and size of the file
C:\TAPE\TAPE.SYS. If the file cannot be found, this is also indicated. The
date, time, and size of the CONFIG.SYS file itself is presented on the first
line of the information window.
The CONFIG.SYS file contains the primary configuration data for the operating
system. Its contents describe the device drivers and programs which are loaded
and executed to start the operating system, as well as a number of features
defining the environment in which the programs will execute.
ΓòÉΓòÉΓòÉ 141. Help for Operating System Information -- OS/2 ΓòÉΓòÉΓòÉ
All of these choices give you information on your current session of OS/2*.
Choose one of the items for more information.
Operating System Information
OS/2 and DOS information
Window List
Processes currently executing
CSD Levels
Reports the CSD level of software packages installed on the system
CONFIG.SYS File Information
Information about your system configuration file.
ΓòÉΓòÉΓòÉ 142. Help for Operating System Information -- Windows ΓòÉΓòÉΓòÉ
All of these choices give you information on your current session of Windows.
Choose one of the items for more information.
Operating System Information
Windows and DOS information
Task List
Processes currently executing
Module List
Modules currently residing in memory
CONFIG.SYS File Information
Information about your system configuration file.
AUTOEXEC.BAT File Information
Information about your startup configuration file.
ΓòÉΓòÉΓòÉ 143. Help for Operating System Information -- Windows NT ΓòÉΓòÉΓòÉ
All of these choices give you information on your current session of Windows
NT. Choose one of the items for more information.
Operating System Information
Windows NT information
Desktop Information
Current settings for the Windows NT desktop
Environment Information
Environment variable values
Window List
Processes currently executing
ΓòÉΓòÉΓòÉ 144. Window List Help ΓòÉΓòÉΓòÉ
This window displays the list of all tasks running on the machine during the
last time the program was started. The list is separated into the visible and
invisible tasks. The visible tasks can be viewed in the Window List. The
invisible tasks have been started such that they will not appear in the Window
List. You may choose any item in the list to display Extended Information.
ΓòÉΓòÉΓòÉ 145. Window List Extended Information Help ΓòÉΓòÉΓòÉ
This window shows the OS/2* internal process and session identity of the chosen
task.
ΓòÉΓòÉΓòÉ 146. Window List Help ΓòÉΓòÉΓòÉ
This window displays the list of all tasks running on the machine during the
last time the program was started. The list is separated into the visible and
invisible tasks. The visible tasks can be viewed in the Window List. The
invisible tasks have been started such that they will not appear in the Window
List. You may choose any item in the list to display Extended Information.
ΓòÉΓòÉΓòÉ 147. Window List Extended Information Help ΓòÉΓòÉΓòÉ
This window shows information about a window in the Windows NT operating
system, including the internal window handle, the process and thread IDs, and
if the window is enabled, iconized, maximized, or visible.
ΓòÉΓòÉΓòÉ 148. Diskette Drives Help ΓòÉΓòÉΓòÉ
This window displays a list of all available diskette drives. The diskettes are
shown by device number and logical drive mapping. Choose any diskette item for
extended diskette information.
ΓòÉΓòÉΓòÉ 149. Diskette Drive Information Help ΓòÉΓòÉΓòÉ
This window displays information about the chosen diskette drive.
Device Type
This reports that it is a Direct Access Device.
Device Size
This reports the maximum diskette size readable by the drive.
Unit Status
This reports the current status of the drive.
Media Status
Indicates if media is currently in the drive.
Device Filter ADD
This reports the presence of a filter ADD. A filter ADD processes
data as it transfers between the device and the operating system.
Device Attributes
These present other attributes of the diskette drive.
ΓòÉΓòÉΓòÉ 150. CSD Level Information ΓòÉΓòÉΓòÉ
The CSD Level Information window displays a list of all the installed
components for which CSD level information has been found. Each item listed is
labelled with the component name, and can be opened to display the CSD level
information for that component.
ΓòÉΓòÉΓòÉ 151. Model and Processor Information ΓòÉΓòÉΓòÉ
The Model and Processor Information window displays a variety of data
concerning the type of system on which the System Information Tool is
executing, including:
Model Name
This is the model name of the system.
Machine Type / Model
This is the machine type / model number of the system. This may not
be present on every system.
Expansion Bus Type
This identifies the type of the primary expansion bus for adapter
cards.
Number of Processors
This is the number of microprocessors active in the system.
UUID
This is the Universal Unique ID number of the system.
Wake-up Event
This identifies the event that caused the system to power up.
Bootup State
This identifies the state of the enclosure when it was last booted.
Power Supply
This identifies the enclosure's power supply state when last booted.
Thermal State
This identifies the enclosure's thermal state when last booted.
Processor
This is the microprocessor used in the system.
Math Coprocessor
If present, this is the math coprocessor installed in the system.
Processor Speed
This is the speed of the microprocessor's clock, in Megahertz.
System Speed
This is the speed of the system board's clock, in Megahertz. This
is only shown if it differs from the Processor Speed.
Internal Processor Cache
This returns the status of the internal CPU cache, if the system CPU
has an internal cache. The status may be enabled, disabled, or
defective.
External Processor Cache
This returns the status of the external CPU cache, if the system CPU
is known to support an external cache. The status may be enabled,
disabled, not installed, or defective.
Model
This is the model byte of the system. Systems which share common
features as processor, speed, machine options, and operating system
support will have the same model byte.
Submodel
This is the submodel byte of the system. The submodel byte may
change when a model implements program detectable differences.
BIOS Revision
This is the BIOS revision level of the ROM image on the system.
BIOS ROM Date
This is the build date for the BIOS ROM image on the system.
Build ID
This is the build id for the flash image on the system. This may not
be present on every system.
System Board POS ID
This is the POS ID for the system board used to identify the system.
Reference Disk Type
This is the type of reference disk used by the current system, if
there are different reference disks available for the given system
model (i.e. there are several types of reference disk for Model 90
and Model 95). Only certain systems will report this data.
NVRAM Size
This indicates the size of the non-volatile memory used by the
system for storing configuration data, if this memory is present in
the system. This memory is only present on Micro Channel* systems.
ΓòÉΓòÉΓòÉ 152. Hot-spare ΓòÉΓòÉΓòÉ
Hot-spare is the ability of the IBM* RAID system to automatically switch to a
spare drive in the case of drive failure. This feature provides uninterrupted
service and guards against loss of data. This feature is only available when
the RAID Level is NOT 0.
ΓòÉΓòÉΓòÉ 153. RAID ΓòÉΓòÉΓòÉ
RAID means Redundant Array of Independent Disks. The RAID system requires a
special adapter and software and uses the SCSI protocol to manage the array of
disks. RAID provides data redundancy in critical situations and also provides
a Hot-spare feature. Additionally, the machine in which a drive fails does not
need to be powerd down in order to be brought up to full capability. RAID
currently supports 540 Megabyte and 1 Gigabyte hard drive sizes.
ΓòÉΓòÉΓòÉ 154. RAID Levels ΓòÉΓòÉΓòÉ
The IBM* RAID System consists of arrays of fixed disk devices. Each array is
assigned a level: 0, 1, or 5. RAID level 0 does not duplicate data on any
spare disks so data is at greatest risk with RAID level 0 however this level
provides the greatest storage capacity and speed. RAID level 5 offers data
redundancy across all drives in the array thus data integrity and protection
are maximized but capacity and performance are decreased. If RAID level 5
performance is unacceptable, RAID level 1 can be choosen which offers data
redundancy a specific drive thus speed is enhanced but data integrity is
decreased but not eliminated. Storage capacity is increased as well.
ΓòÉΓòÉΓòÉ 155. General RAID Information ΓòÉΓòÉΓòÉ
General RAID Information shows the major sub-components of RAID: Adapter
Information, Logical Drives, and Physical Drives. In a RAID system a number of
physical devices or a portion of a physical device can be designated as a
logical drive with or without data redundancy properties.
ΓòÉΓòÉΓòÉ 156. RAID Adapter Information ΓòÉΓòÉΓòÉ
The RAID Adapter Information shows the details concerning the RAID Adapter,
like the number of physical drives configured, the number of logical drives
configured, and the slot and active drive parameters of the system.
Logical Drives
The number of logical system drives present in the RAID System. Up
to eight logical system drives can be configured. RAID arrays are
groupings of one or more drives. The total size of the array is the
number of drives in the array multiplied by the smallest drive in
the array. Note: The RAID Levels will affect the storage capacity of
the logical drive.
Physical Devices
The number of physical devices present in the RAID System. A
maximum of seven devices are supported.
Slot Number
The slot in the machine in which the RAID card resides.
Flash ROM Reprogram count.
The number of times the internal RAID configuration tables have been
modified.
Offline Drives
The number of Offline drives in the system. Offline drives are
physically in the system but are not accepting data transactions for
one reason or another. Offline drives do not contain data and are
usually Hot-spare drives.
Critical Drives
The number of logical system drives in need of replacement or
rebuilding if data integrity is to be maintained. A critical
condition indicates that the data integrity is in jeopardy. A
Hot-spare may have taken over a failed drive and now no spare exists
should another drive fail. The Critical connotation applies only to
logical drives.
Dead Drives
The number of drives that are not responding to commands. This may
be a failed drive or drive with power off.
ΓòÉΓòÉΓòÉ 157. RAID Logical Drive Information ΓòÉΓòÉΓòÉ
The RAID Logical Drive Information shows the logical drives, sizes, and status
of configured Logical Drives on the RAID System. The RAID Levels are also
given.
ΓòÉΓòÉΓòÉ 158. RAID Physical Drive Information ΓòÉΓòÉΓòÉ
The RAID Physical Drive Information shows the physical devices, sizes, and
status of the physical devices of the RAID System. Status can be On, Dead, and
Standby. In addition to verbal status the visual status is indicated on the
representation of the machine to the left. On signifies normal operation. Dead
signifies failed drives and Standby represents Hot-spares.
On
Indicates the drive is On-line and functioning properly. A green
light on the drive visually confirms that the drive is On-Line.
Dead
Indicates that the drive is Off-Line, however the machine still
recognizes that a drive should exist in that bay. Drives without
power appear as empty bays.
Standby
Indicates that the drive is a Hot-spare.
ΓòÉΓòÉΓòÉ 159. RAID Detailed Device Information ΓòÉΓòÉΓòÉ
The RAID Detailed Device Information shows specific information about each
physical device.
Device Type
The device type is given visually and verbally and is limited to
SCSI devices.
Unit Status
Status can be On, Dead, and Standby.
Device Size
The size is in units of Kilobytes.
Bus Type
The Bus Type of the SCSI Bus can be: Normal SCSI (5 MHz), Fast-SCSI,
8-bit SCSI, or Wide-SCSI.
Host Bus Width
Width of the SCSI bus in bits, usually 8 or 16.
ΓòÉΓòÉΓòÉ 160. SCSI Adapter Information ΓòÉΓòÉΓòÉ
The SCSI Adapter Information window displays specific information about the
adapter and provides selections to obtain specific information about devices it
controls.
Adapter Type
Name of the SCSI adapter as reported by the adapter.
Physical Unit Number (PUN)
Also known as the target ID. A number ranging from 0 to 15 that
helps identify the adapter.
Logical Unit Number (LUN)
A number from 0 to 7 that helps identify the adapter.
Bus Type
Several protocol versions exist. ST506 CAM I and CAM II (both
Direct Access Storage Device (DASD) types), ESDI - also DASD,
Floppy, SCSI I, II, and III. Unknown protocols will show unknown.
Location
The slot of the adapter or controller is given. If the adapter
resides on the computer's main board, the System Board Controller
will be indicated.
Bus Attributes
Signifies the bus width. Available options are FAST SCSI, 8, 16, and
32 bit.
Input/Output I/O Access
Indicates how I/O access is controlled. Available options are Bus
Master (DMA Master), PIO (Programmed I/O - also known as I/O
mapped), DMA Slave (DMA Slave), Memory mapped I/O and Unknown I/O.
Host Bus
Bus type of the computer. Available options are ISA, Extended ISA,
Micro Channel*, Not Listed, and Unknown.
Host Bus Width
Width in bits of the host computer. Available options are 8, 16,
24, 32, and unknown.
Arbitration Level
Level that determines how conflicts for the bus are resolved. The
lower the number, the higher the priority. This is only available on
some Micro Channel* adapters.
Fairness
Indicates if the adapter agrees to abide by a ruling allowing for
sharing of the bus and, thus, access to system resources. This is
only available on some Micro Channel* adapters.
Wait
Indicates that the adapter will wait when contention for the bus
exists. This is only available on some Micro Channel* adapters.
Adapter Attributes
Adapter Attributes shows addressing information about the adapter.
Addressing indicates if the unit is capable of addressing addresses
greater than 16 Megabytes.
SCB indicates if IBM SCB support is provided. If so, the device can
be controlled through formatted SCB commands.
Scatter/Gather indicates if the adapter supports scatter/gather in
hardware. Otherwise, the scatter/gather is emulated with software.
Scatter/Gather is the idea of requesting multiple reads and writes
at one time and letting the adapter take care of the details of how
those operations are carried out.
CHS Addressing indicates if Cylinder/Head/Sector addressing is
supported.
Maximum Scatter/Gather List
Shows the maximum number of elements supported in a single hardware
scatter/gather list.
Maximum CDB Length
Shows the maximum Control Data Block transfer length, in bytes, that
is supported by this adapter.
ADD Major Level
Shows the ADD Major level in the current operating system.
ADD Minor Level
Shows the ADD Minor level in the current operating system.
Devices Connected
The number of devices connected to this particular adapter. The
devices circumscribed are available for further information.
ΓòÉΓòÉΓòÉ 161. SCSI Device Information ΓòÉΓòÉΓòÉ
The SCSI Device Information window displays specific information about the SCSI
device selected and represents most of what the system knows about that device.
Device Type
Indicates the SCSI device type. Available choices are Direct Access
Device (DASD), Fixed Disk, Tape Device (Tape Drive), Printer Device,
Processor Device (connection to another adapter on a separate
machine), Write Once Read Many (WORM), Compact Disk Read Only Memory
(CD-ROM), Scanner Device, Optical Disk Device, Change Device (i.e.
Optical Disk Juke Box), Communication Device (modem).
Device Size
Indicates the device's size in bytes.
Device Unit PUN
Indicates the device's Physical Unit Number PUN or Target ID. All
devices under an adapter are uniquely identified by the PUN/LUN
combination.
Device Unit LUN
Indicates the device's Logical Unit Number LUN All devices under an
adapter are uniquely identified by the PUN/LUN combination.
ANSI Level Supported
Indicates level of interface standard supported by the device.
These standards are defined by the American National Standards
Institute.
Unit Status
Indicates the current status of the device. Available options are
Device Ready, Device Powered Off, and Device Defective.
Media Status
Indicates if media is currently in the drive.
Vendor ID
Text field identifying the manufacturer of the device as reported by
the device.
Product ID
Text field identifying the model of the device as reported by the
device.
Product Revision Level
Text field identifying the revision level of the device as reported
by the device.
Device Filter ADD
Indicates if a filter ADD is present. A filter ADD performs an
operation or task on data as it travels between the device and the
operating system.
Device Attributes
Indicates various characteristics of the device. These will vary
from device to device.
ΓòÉΓòÉΓòÉ 162. About System Information Tool ΓòÉΓòÉΓòÉ
The System Information Tool is a PM application designed to gather and display
a variety of information about the hardware and software configuration of your
system. The program is primarily designed for use on IBM* PS/1*, PS/2*,
PS/Valuepoint*, and ThinkPad* systems, but many features will function on
systems from other vendors.
In addition to operation as a PM application, the System Information Utility
can generate output to a file or printer using command line options, or menu
selections during PM operation.
The System Information Tool provides information on the following topics:
o Adapter Identity, with configuration information for many common
adapters. This feature is provided for PCI, Micro Channel*, ISA, and EISA
bus systems.
o Drive Information, including file system type, available space, drive
size, and partition layout
o Power Management Information
o Error Log Display and Interpretation
o Keyboard Information
o Memory Configuration, including total physical memory and installed SIMM
identification
o Mouse Type and Settings
o Operating System Information, including version, DOS support, and session
limits
o Model and Processor Information, including model name, processor type and
speed, and BIOS date
o Parallel and Serial Port Configuration
o PCI Bus Configuration
o PCMCIA Bus Configuration
o Printer Configuration, including data on installed printer drivers
o SCSI, ESDI, IDE/ST506, or Other disk adapter information, including
devices attached, device sizes, and adapter data
o System Security Features, including power-on password and C2 features
o Video System Information, including adapter type, screen resolution, and
video display identification
o Vital Product Data (VPD)
The program also contains support for control from the command line, including
textual report generation and binary history file generation and loading.
ΓòÉΓòÉΓòÉ 163. Help for File ΓòÉΓòÉΓòÉ
Use the choices on the File menu to generate textual reports of the data
contained in the active window, as well as the entries which can be accessed
within the window, to a user selected file or the default printer, or to
generate a binary history file, which will allow the system's data to be viewed
by SINFG30.EXE at a later time or on another system.
ΓòÉΓòÉΓòÉ 164. Help for Generate History File ΓòÉΓòÉΓòÉ
Use the Generate History File option to make a binary file which contains all
of the information displayed in the program as well as the current time and
date. The history file can be viewed later by using the /F command line
parameter when starting the System Information Tool.
ΓòÉΓòÉΓòÉ 165. Help for Command Line Parameters ΓòÉΓòÉΓòÉ
The name of the command line executable program that starts the System
Information Tool is dependant on the package that contained the System
Information Tool program. Please select the package that contained the System
Information Tool:
o Netfinity Manager or Client Services for Netfinity Version 5.0
o OS/2 Warp BonusPak
ΓòÉΓòÉΓòÉ 166. Command Line Parameters: Netfinity Manager and Client Services for Netfinity-specific ΓòÉΓòÉΓòÉ
The System Information Tool can be started from the command line and supports
five command line parameters.
SINFG30 /P:<filename>
This parameter is used to generate a textual report of all the
information collected by the program. A logical printer name like
LPT1 can be used as a filename and the report will be sent to the
printer. The program logo screen will be displayed while the
information is being gathered, and the program will terminate after
the report is generated.
SINFG30 /H:<filename>
This parameter is used to generate a binary history file which
contains all of the information detected by the program as well as
the time and date the file was generated. This file can then be
used as a input source using the /F command line parameter. The
program logo screen will be displayed while the information is being
gathered, and the program will terminate after the file is
generated.
SINFG30 /F:<history filename>
This parameter causes the program to use a history file as source
for information gathering rather than the physical system the
program is being executed on. A history file from an another system
can be viewed on your current system with this option.
SINFG30 /NOLOGO
When this parameter is used the program logo screen will not be
displayed. This parameter can be used in conjunction with any of
the other parameters.
SINFG30 /B
This parameter causes the program to bypass all warning and
informational messages while the program is starting. This could be
used for unattended startup. This parameter can be used in
conjunction with any of the other parameters.
ΓòÉΓòÉΓòÉ 167. Command Line Parameters: OS/2 Warp BonusPak-specific ΓòÉΓòÉΓòÉ
The System Information Tool can be started from the command line and supports
five command line parameters.
SYSIGUI /P:<filename>
This parameter is used to generate a textual report of all the
information collected by the program. A logical printer name like
LPT1 can be used as a filename and the report will be sent to the
printer. The program logo screen will be displayed while the
information is being gathered, and the program will terminate after
the report is generated.
SYSIGUI /H:<filename>
This parameter is used to generate a binary history file which
contains all of the information detected by the program as well as
the time and date the file was generated. This file can then be
used as a input source using the /F command line parameter. The
program logo screen will be displayed while the information is being
gathered, and the program will terminate after the file is
generated.
SYSIGUI /F:<history filename>
This parameter causes the program to use a history file as source
for information gathering rather than the physical system the
program is being executed on. A history file from an another system
can be viewed on your current system with this option.
SYSIGUI /NOLOGO
When this parameter is used the program logo screen will not be
displayed. This parameter can be used in conjunction with any of
the other parameters.
SYSIGUI /B
This parameter causes the program to bypass all warning and
informational messages while the program is starting. This could be
used for unattended startup. This parameter can be used in
conjunction with any of the other parameters.
ΓòÉΓòÉΓòÉ 168. Advanced Power Management (APM) Information Menu ΓòÉΓòÉΓòÉ
The Advanced Power Management Information Menu displays data concerning the
power management of the system. The following information is provided:
APM BIOS Version
This identifies the APM BIOS Extension interfaces available to the
operating system software layers. This number is composed of a
major and minor revision level.
APM Device Driver Version
This identifies the APM Device Driver level and is composed of a
major and minor revision level.
Power Management Enabled/Disabled
This indicates the enabled state of power management in the system.
When power management is enabled the computer and software operate
in a way that reduces power consumption and tracks power status.
Power Source
This indicates the source of power. The possible values are Battery
Power or AC Power.
Battery State
This is the status for the DC battery power source. The possible
values are High, Low, Critical, and Charging.
Battery Life
This indicates the remaining power level for the DC battery power
source. If the system does not have the hardware to provide this
data, this item will not be displayed.
ΓòÉΓòÉΓòÉ 169. PC Memory Card International Association (PCMCIA) Information Menu ΓòÉΓòÉΓòÉ
The PCMCIA Information Menu displays data concerning the hardware and software
components of the system. The following information is provided:
Revision number for Card Services
This identifies the vendor's internal revision number for this
specific implementation of Card Services. This number is composed
of a major and minor revision level.
Card Services Release Level
This indicates the level of compliance with a Card Services Release
number. This number is composed of a major and minor revision
level.
Vendor String
This describes the Card Services implementor and may include
copyright information.
Socket Configuration
This shows the logical sockets managed by Card Services and
indicates if a PC card is present. When a card is present, specific
data is provided when the item is selected.
ΓòÉΓòÉΓòÉ 170. PCMCIA Socket Information Menu ΓòÉΓòÉΓòÉ
The PCMCIA Socket Information window displays a variety of data concerning the
PC card located in the socket. The data returned depends on the type of card
and the socket services provided on the system. Some of the information given
may include:
Interrup Request Line (IRQ)
This may include the IRQ number, the IRQ type, and the state
Manufacturer Information
This includes the manufacturer code and information field from the
card.
Input/Output Information
This may include the base port address, number of ports, number of
address lines and width of data path.
Card Register Settings (if present)
This may include the Status register, Pin register, Socket/Copy
register, and Option register.
ΓòÉΓòÉΓòÉ 171. EISA Slot Information ΓòÉΓòÉΓòÉ
The EISA Slot Information window displays information about the EISA slots and
devices installed in the system.
The following data is provided for each slot:
o Slot number
o Slot location
o Adapter name
o Product ID
Detailed slot information is displayed when a slot is selected.
ΓòÉΓòÉΓòÉ 172. EISA Slot Information Menu ΓòÉΓòÉΓòÉ
The EISA Slot Information window displays information about the EISA slots and
devices installed in the system. This information includes slot number, slot
type, device name, and product ID.
ΓòÉΓòÉΓòÉ 173. Detailed EISA Slot Information ΓòÉΓòÉΓòÉ
The detailed slot information consists of the following data:
Device Name
This is a character string which identifies the device.
Product ID
This is a seven digit number which identifies the device.
Manufacturer
This is the manufacturer of the system board or adapter.
Slot Number : Slot Location
Slot Number is the physical or logical slot number in the system of
the device. The system board is always slot 0. Slots 1-15 are
physical slots. Slots 16-64 are for virtual devices.
Duplicate IDs
EISA systems can handle adapters with duplicate product IDs. This
infomation lets the configuration program know to look for renamed
CFG files.
ID Type
An EISA system may have EISA and ISA adapters. ISA adapters will
not have readable IDs.
Slot Type
An expansion slot is a physical slot. An embedded device is an EISA
I/O device integrated onto the system board. A virtual device is
generally a software driver that may need system resources.
Configuration Utility Revision Level
Major and minor revision levels of the configuration program.
Checksum for Configuration File
Checksum for the !*******.CFG file.
Number of Device Functions
Number of device functions associated with the device, (i.e. memory
function, serial function, parallal function, etc).
Combined function information
The contents of the combined function information byte.
EISA Configuration information
ΓòÉΓòÉΓòÉ 174. EISA Bus Information ΓòÉΓòÉΓòÉ
The EISA Bus Information section displays information about the EISA adapters
installed in the system. This information includes the slot number, slot
location, product id and device name.
Detailed slot information is displayed when a slot is selected.
ΓòÉΓòÉΓòÉ 175. EISA Configuration Information Menu ΓòÉΓòÉΓòÉ
The EISA Configuration Information window displays detailed EISA configuration
information for the EISA functions supported by this slot. This information
may includes memory configuration information, interrupt configuration, DMA
channel information, Port I/O information.
ΓòÉΓòÉΓòÉ 176. PCI Information Menu ΓòÉΓòÉΓòÉ
The PCI Information Menu displays information about the PCI (Peripheral
Component Interconnect) bus and devices installed on the system. The PCI bus
is a bus that can be populated with adapters requiring fast access to each
other and/or to system memory. The bus and its attached adapters can be
accessed by the host processor at speeds approaching that of the processor's
full native speed.
ΓòÉΓòÉΓòÉ 177. PCI Bus Information ΓòÉΓòÉΓòÉ
The PCI Bus Information section displays information about the PCI interface
level, hardware characteristics, and PCI devices found on a specific bus.
PCI Interface Level
This identifies the PCI BIOS interface version level for this
specific implementation of PCI BIOS. This number is composed of a
major and minor version level.
Number of Last PCI Bus in System
This is the number of the last PCI bus in the system. PCI buses are
numbered starting at zero.
PCI Hardware Characteristics
This identifies what specific hardware characteristics the platform
supports in relation to accessing configuration space and generating
PCI Special Cycles. The PCI Specification defines two hardware
mechanisms for accessing configuration space. The PCI Specification
also defines hardware mechanisms for generating Special Cycles.
Detailed PCI Device Information is available when a PCI device is selected.
ΓòÉΓòÉΓòÉ 178. PCI Device Information Menu ΓòÉΓòÉΓòÉ
The PCI Device Information Menu displays information about the PCI devices
installed on the system. If the device is one built before revision 2.0 of the
PCI Specification it can not be identified. Available information includes
vendor name, vendor ID, device ID, status and command registers data, cache
line size, latency data, header type, BIST, expansion ROM base address, and
interrupt data.
ΓòÉΓòÉΓòÉ 179. PCI Device Information ΓòÉΓòÉΓòÉ
The PCI Device Information window displays information about the PCI device and
configuration data for this device.
Vendor Name
This is a string that identifies the manufacturer of the device.
Vendor ID
This is a four digit number that uniquely identifies the
manufacturer.
Device ID
This is a four digit number assigned by the manufacturer that
uniquely identifies the device.
Bus Number
This is a two digit number that uniquely selects a PCI bus.
Device Number
This is a two digit number in the range 0..31 that uniquely selects
a device on a PCI bus.
Class Code Register
This is a six digit number that identifies the base class,
sub-class, and, programming interface. The base class identifies
the basic function of the device (i.e. network controller). The
sub-class and programming interface combine to more specifically
identifiy the device(i.e. token ring controller).
Revision ID
This is a one digit number assigned by the manufacturer and
identifies the revision number of the device.
Cache Line Size
This value specifies the system cache line size in doubleword
increments.
Header Type
This defines the format of bytes 10h - 3Fh of the device's
configuration header.
BIST
The BIST (Built-In-Self-Test) may be implemented by both master and
target devices. If the device does not support BIST, this value
will be zero.
Latency Timer
If the device is a bus master, this specifies the minimum amount of
time in PCI clocks that this device has on the bus before it must
surrender the bus to another master. The latency timer must be
supported by bus master devices.
Min_Gnt Register
This specifies how long a burst period the device needs. This
register must be implemented by bus master devices.
Max_Lat Register
This register specifies how often the device needs access to the PCI
bus. A value of zero indicates the device has no stringent
requirment in this system.
Interrupt Line
This identifies which of the interrupt request lines on the system
interrupt controller the device's PCI interrupt request line is
connected to.
Interrupt Pin
This identifies which of the four PCI interrupt request lines (INTA#
- INTD#) the device is connected to. A value of zero indicates that
this device doesn't use interrupts.
Command Register
This register provides basic control over the device's ability to
respond to PCI accesses.
I/O Access
This indicates if the device responds to PCI I/O accesses.
Memory Access
This indicates if the device responds to PCI memory accesses.
Master Enable
This indicates if the device can act as a bus master and generate
PCI bus cycles.
Special Cycle Recognition
This indicates if the device is enabled to monitor PCI special
cycles.
Memory Write and Invalidate
This indicates if the device can generate the memory write and
invalidate command.
Palette Snoop
This indicates if the VGA-compatible device is allowed to perform
color palette snooping.
Parity Error Response
This indicates if the device can report parity errors.
Wait Cycle
This indicates if the device does address/data stepping.
System Error
This indicates if the device can drive the SERR# line.
Fast Back-to-Back
This indicates if the bus master device is capable of performing
fast back-to-back transactions to different targets.
Status Register
This register indicates the status of PCI bus-related events.
Fast Back-to-Back Capable
This indicates if the target device supports fast back-to-back
transactions with different targets.
Data Parity Reported
This indicates if the bus master device detected a parity error
itself or from a target device it was addressing.
Device Select (DEVSEL#) Timing
This indicates the slowest DEVSEL# timing for a target device.
Signaled Target Abort
This indicates if the target device terminated a transaction with a
target-abort.
Received Target Abort
This indicates the if the bus master device had a transaction
terminated by a target-abort from the current target device.
Received Master Abort
This indicates the if the bus master device transaction is
terminated with a master-abort.
Signaled System Error
This indicates if the device generated a System Error on the SERR#
line.
Detected Parity Error
This indicates the if the device detected a parity error.
ΓòÉΓòÉΓòÉ 180. Help for Update Adapter Name ΓòÉΓòÉΓòÉ
Use the Update Adapter Name option to change the adapter name.
To see the updated name rerun the program.
ΓòÉΓòÉΓòÉ 181. Help for Update Adapter Data ΓòÉΓòÉΓòÉ
Use the Update Adapter File for detailed information to obtain detailed
information for this adapter. To update the data file, insert the adapter
option diskette in drive A:.
To see the updated data rerun the program.
ΓòÉΓòÉΓòÉ 182. Plug and Play ΓòÉΓòÉΓòÉ
The Plug and Play information window displays a variety of data about the
system resources used by Plug and Play adapters, including:
Static System Node Information
Lists the static components of the system.
IO Resources
Lists the I/O resources currently in use.
IRQ Resources
Lists the IRQ resources currently in use.
DMA Resources
Lists the DMA resources currently in use.
Memory Resources
Lists the memory resources currently in use.
ΓòÉΓòÉΓòÉ 183. Static System Node Information ΓòÉΓòÉΓòÉ
A static system node is a hardware component attached to the planar or an ISA
legacy (non-Plug and Play) adapter which reserves system resources for its own
use, thereby preventing Plug and Play adapters from using those resources
themselves. This window lists any static system nodes present in the system as
well as the resources allocated to them.
ΓòÉΓòÉΓòÉ 184. IO Resources ΓòÉΓòÉΓòÉ
Support hardware on adapter cards such as coprocessor or interface chips can by
accessed by the system via ports in the I/O address space. This window lists
the ranges of ports which are allocated to components in the system.
ΓòÉΓòÉΓòÉ 185. IRQ Resources ΓòÉΓòÉΓòÉ
Adapter and support chips can notify the CPU that an event has occurred by
executing an interrupt request (IRQ). Although some hardware can share
interrupt lines, most devices must be allocated its own IRQ to avoid conflicts.
This window lists the IRQ levels which are allocated to components in the
system.
ΓòÉΓòÉΓòÉ 186. DMA Resources ΓòÉΓòÉΓòÉ
Direct memory access (DMA) allows devices to access the main memory of a
computer without direct intervention by the CPU. This window lists the DMA
channels in use by components in the system.
ΓòÉΓòÉΓòÉ 187. Memory Resources ΓòÉΓòÉΓòÉ
Adapters may reserve portions of main memory for use. This window lists the
memory ranges in use by components in the system.
ΓòÉΓòÉΓòÉ 188. NDIS Information ΓòÉΓòÉΓòÉ
The NDIS (Network Driver Interface Specification) Information window displays a
variety of data about the network, including:
Network Adapter Information
Shows information about the network adapter.
Network Statistics
Shows a snap shot of the network statistics.
Device Driver
Shows information about the network adapter device driver.
ΓòÉΓòÉΓòÉ 189. Network Adapter Information ΓòÉΓòÉΓòÉ
This window lists information about the network adapter, including the Product
Name, Manufacturer Name, Universal Adapter Address, and Local Administered
Address.
The Universal Adapter Address corresponds to the network address which is
permanently "burned" into your network adapter. For Token Ring adapters,
System Information Tool reports a single Token Ring format address obtained
from the NDIS driver.
For Ethernet adapters, System Information Tool reports both the Canonical and
Token Ring formats of the address.
The Local Administered Address is an optional network adapter address
determined by your local network administrator. It is also shown in Token Ring
format for Token Ring adapters and both Canonical and Token Ring formats for
Ethernet adapters.
ΓòÉΓòÉΓòÉ 190. Network Statistics ΓòÉΓòÉΓòÉ
This window lists a snap shot of the network statistics when System Information
Tool is run.
For an Ethernet adapter, the network statistics may be reported as zero. Some
Ethernet adapters do not report the statistics back to the NDIS driver.
ΓòÉΓòÉΓòÉ 191. Device Driver ΓòÉΓòÉΓòÉ
This window lists information about the network adapter device driver,
including the Device Driver Name and Device Driver Description.
ΓòÉΓòÉΓòÉ 192. Cluster Information ΓòÉΓòÉΓòÉ
The Cluster Information window displays a variety of data about the cluster,
including:
Cluster Name
Shows the name of the cluster set up by Cluster Administrator.
Resources Owned
Shows the number of resources owned by the cluster.
Node Name
Shows the name of the node.
Number of Groups
Shows the number of groups in the node.
Active Groups
Shows the number of active groups owned by the node.
ΓòÉΓòÉΓòÉ 193. Port Connector Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the system port connectors.
ΓòÉΓòÉΓòÉ 194. Port Connector Information Help ΓòÉΓòÉΓòÉ
This window shows the information regarding the system port connectors.
Port
This describes the function of the port connector.
Internal
This shows the internal reference label for the port connector and
indicates the type of connector.
External
This shows the external reference label for the port connector and
indicates the type of connector.
ΓòÉΓòÉΓòÉ 195. System Configuration Information Help ΓòÉΓòÉΓòÉ
This window shows the information required to configure the base board.
ΓòÉΓòÉΓòÉ 196. System Configuration Information Help ΓòÉΓòÉΓòÉ
This window shows the information required to configure the base board's
Jumpers and Switches.