home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 8 Other
/
08-Other.zip
/
s521os2e.exe
/
eqnkmsg.hlp
(
.txt
)
< prev
next >
Wrap
OS/2 Help File
|
1998-09-03
|
17KB
|
576 lines
ΓòÉΓòÉΓòÉ 1. Help for EQN0001 ΓòÉΓòÉΓòÉ
Explanation: A session is ACTIVE.
ΓòÉΓòÉΓòÉ 2. Help for EQN0002 ΓòÉΓòÉΓòÉ
Explanation: A session is PENDING or in the process of changing states.
ΓòÉΓòÉΓòÉ 3. Help for EQN0003 ΓòÉΓòÉΓòÉ
Explanation: The manager workstation is connecting to a client workstation. A
connection is being established.
ΓòÉΓòÉΓòÉ 4. Help for EQN0004 ΓòÉΓòÉΓòÉ
Explanation: The RWCcontrol of a workstation has been suspended.
ΓòÉΓòÉΓòÉ 5. Help for EQN0006 ΓòÉΓòÉΓòÉ
Explanation: The client pressed a hot key sequence during an active
RWCsession. The session state is changed to MONITORING.
ΓòÉΓòÉΓòÉ 6. Help for EQN0008 ΓòÉΓòÉΓòÉ
Explanation: The manager and client workstations have made a connection and
are attempting to establish a session.
ΓòÉΓòÉΓòÉ 7. Help for EQN0009 ΓòÉΓòÉΓòÉ
Explanation: The manager and client workstations are terminating or ending a
session.
ΓòÉΓòÉΓòÉ 8. Help for EQN0010 ΓòÉΓòÉΓòÉ
Explanation: The client pressed the hot key sequence and is BUSY while
choosing states.
ΓòÉΓòÉΓòÉ 9. Help for EQN0022 ΓòÉΓòÉΓòÉ
Explanation: Title added to OS/2 task list.
ΓòÉΓòÉΓòÉ 10. Help for EQN0023 ΓòÉΓòÉΓòÉ
Explanation: Instructional message displayed on the Remote Workstation Control
pop-up window.
ΓòÉΓòÉΓòÉ 11. Help for EQN0027 ΓòÉΓòÉΓòÉ
Explanation: This is the OS/2 Full Screen description for the icon.
o The message text
o An explanation of the messages
o The recommended user response
o The system response of the product after logging the message
o The recommended programmer response
ΓòÉΓòÉΓòÉ 12. Help for EQN0151 ΓòÉΓòÉΓòÉ
Explanation: The current task could not allocate sufficient memory to continue
processing.
User Response: Contact the system programmer.
Programmer Response: Correct the memory allocation problem and restart the
task.
System Action: Processing terminates.
ΓòÉΓòÉΓòÉ 13. Help for EQN0152 ΓòÉΓòÉΓòÉ
Explanation: Unable to complete processing because a disk-full error was
encountered.
User Response: Free some disk space by removing unnecessary program or data
files.
Programmer Response: None.
System Action: Processing terminates.
ΓòÉΓòÉΓòÉ 14. Help for EQN0153 ΓòÉΓòÉΓòÉ
Explanation: An event has occurred that requires your attention. Processing
will not continue until you press a key.
User Response: Press any key.
Programmer Response: None.
System Action: Processing continues when a key is pressed.
ΓòÉΓòÉΓòÉ 15. Help for EQN0154 ΓòÉΓòÉΓòÉ
Explanation: The .hlp file for this function was not found in the directory
where the Remote Workstation Control service is installed.
User Response: You can continue without help, or contact the system programmer
to restore the help file.
Programmer Response: Copy the appropriate help file from the installation
diskette.
System Action: Processing continues.
ΓòÉΓòÉΓòÉ 16. Help for EQN0155 ΓòÉΓòÉΓòÉ
Explanation: Unable to complete the request because of a lack of system
resources.
User Response: Contact the system programmer.
Programmer Response: Release some system resources and retry.
System Action: Processing terminates.
ΓòÉΓòÉΓòÉ 17. Help for EQN0156 ΓòÉΓòÉΓòÉ
Explanation: Unexpected error encountered in the specified component.
User Response: Contact the system programmer.
Programmer Response: Follow your normal problem determination procedures.
System Action: System action depends on the error encountered.
ΓòÉΓòÉΓòÉ 18. Help for EQN0191 ΓòÉΓòÉΓòÉ
Explanation: An error occurred trying to start the Remote Workstation Control
service. The following return codes represent possible causes of the failure:
o 1 - System error. A call to the operating system generated an error.
o 3 - Netfinity error. A call to Netfinity generated an error.
User Response: Try to start other remote services. If they start, shut down
and restart the workstation and try again to start the Remote Workstation
Control service. Otherwise, contact your system programmer.
Programmer Response: To determine the problem, complete the following steps:
1. Add the following statement to the bottom of the CONFIG.SYS file on this
workstation:
2. SET IKODEBUG=path where path is the drive and directory in which you want
the debug file to be created
3. Shut down and restart the workstation.
4. Repeat the action that caused this error.
5. One of the following files will be created in the directory you specified.
6. IKOTRBAS.001 on the Client workstation.
7. IKOTRGUI.00n ,where n is the number of RWC sessions concurrently active, on
the Manager workstation.
8. Send a copy of the file generated to your IBM representative for
assistance.
9. NOTE: Remember to remove this statement from the CONFIG.SYS file after you
get the debug file.
System Action: The Remote Workstation Control session does not start.
ΓòÉΓòÉΓòÉ 19. Help for EQN0192 ΓòÉΓòÉΓòÉ
Explanation: Your workstation failed to receive data sent from the remote
workstation. The following return codes represent possible causes of the
failure:
o 1 - System error. A call to the operating system generated an error.
o 2 - Buffer error. There is not enough space to receive the data sent from
the remote workstation.
o 3 - Netfinity error. A call to Netfinity generated an error.
User Response: Try to use other remote services. If they work, shut down and
restart the workstation and restart the Remote Workstation Control service.
Otherwise, contact your system programmer.
Programmer Response: To determine the problem, complete the following steps:
1. Add the following statement to the bottom of the CONFIG.SYS file on this
workstation:
2. SET IKODEBUG=path where path is the drive and directory in which you want
the debug file to be created
3. Shut down and restart the workstation.
4. Repeat the action that caused this error.
5. One of the following files will be created in the directory you specified.
6. IKOTRBAS.001 on the Client workstation.
7. IKOTRGUI.00n ,where n is the number of RWC sessions concurrently active, on
the Manager workstation.
8. Send a copy of the file generated to your IBM representative for
assistance.
9. NOTE: Remember to remove this statement from the CONFIG.SYS file after you
get the debug file.
System Action: The Remote Workstation Control session ends.
ΓòÉΓòÉΓòÉ 20. Help for EQN0193 ΓòÉΓòÉΓòÉ
Explanation: Your workstation failed to send data to the remote workstation.
The following return codes represent possible causes of the failure:
o 1 - System error. A call to the operating system generated an error.
o 3 - Netfinity error. A call to Netfinity generated an error.
o 4 - Network timeout error. The remote session partner did not respond
within the time limit specified in the Network Timeout Configuration.
User Response: Check that remote applications are still active and that other
remote services work.If they work, shut down and restart the workstation and
restart the Remote Workstation Control service. Otherwise, contact your system
programmer.
Programmer Response: To determine the problem, complete the following steps:
1. Add the following statement to the bottom of the CONFIG.SYS file on this
workstation:
2. SET IKODEBUG=path where path is the drive and directory in which you want
the debug file to be created
3. Shut down and restart the workstation.
4. Repeat the action that caused this error.
5. One of the following files will be created in the directory you specified.
6. IKOTRBAS.001 on the Client workstation.
7. IKOTRGUI.00n ,where n is the number of RWC sessions concurrently active, on
the Manager workstation.
8. Send a copy of the file generated to your IBM representative for
assistance.
9. NOTE: Remember to remove this statement from the CONFIG.SYS file after you
get the debug file.
System Action: The Remote Workstation Control session ends.
ΓòÉΓòÉΓòÉ 21. Help for EQN0194 ΓòÉΓòÉΓòÉ
Explanation: An error occurred trying to close the Remote Workstation Control
service. A return code of 1 means that a call to the operating system generated
an error.
User Response: Contact your system programmer.
Programmer Response: To determine the problem, complete the following steps:
1. Add the following statement to the bottom of the CONFIG.SYS file on this
workstation:
2. SET IKODEBUG=path where path is the drive and directory in which you want
the debug file to be created
3. Shut down and restart the workstation.
4. Repeat the action that caused this error.
5. One of the following files will be created in the directory you specified.
6. IKOTRBAS.001 on the Client workstation.
7. IKOTRGUI.00n ,where n is the number of RWC sessions concurrently active, on
the Manager workstation.
8. Send a copy of the file generated to your IBM representative for
assistance.
9. NOTE: Remember to remove this statement from the CONFIG.SYS file after you
get the debug file.
System Action: The Remote Workstation Control session abends.
ΓòÉΓòÉΓòÉ 22. Help for EQN0195 ΓòÉΓòÉΓòÉ
Explanation: You pressed the Terminate push button.
User Response: Press the 'Yes' push button to continue ending the session.
Press the 'No' push button to cancel.
Programmer Response: None.
System Action: If you choose 'Yes', the session ends and control returns to
the operating system. If you choose 'No', the Change State window reappears and
enables you to choose another state.
o The message text
o An explanation of the messages
o The recommended user response
o The system response of the product after logging the message
o The recommended programmer response
ΓòÉΓòÉΓòÉ 23. Help for EQN0501 ΓòÉΓòÉΓòÉ
Explanation: The RWC device driver was successfully loaded.
User Response: None.
Programmer Response: None.
System Action: Processing continues.
ΓòÉΓòÉΓòÉ 24. Help for EQN0502 ΓòÉΓòÉΓòÉ
Explanation: The following files may have been erased from the directory in
which Netfinity Server is installed:
o EQNKRCLD.EXE
o EQNRCKB.EXE
o EQNKRCSH.EXE
o EQNKRAS.DLL
o EQNRCUT.DLL
o EQNRCVI.DLL
o EQNUT.DLL
User Response: Contact the system programmer.
Programmer Response: Reinstall Netfinity Server on the client.
System Action: Processing terminates.
ΓòÉΓòÉΓòÉ 25. Help for EQN0504 ΓòÉΓòÉΓòÉ
Explanation: The RWC files were successfully loaded and started.
User Response: None.
Programmer Response: None.
System Action: Processing continues.
ΓòÉΓòÉΓòÉ 26. Help for EQN0505 ΓòÉΓòÉΓòÉ
Explanation: Either the CONFIG.SYS file was not updated correctly when the RWC
was installed, or one or more of the following files could not be found when
you started the client:
o EQNRCKB.EXE
o EQNKRCLD.EXE
o EQNKRCSH.EXE
o EQNRCUT.DLL
o EQNRCVI.DLL
o EQNKRAS.DLL
o EQNUT.DLL
User Response: Contact the system programmer.
Programmer Response: Perform the following steps:
1. Ensure that the following statements appear before any other DEVICE or CALL
statements in the CONFIG.SYS file (drive\dir represents the path where the
RWC is installed).
DEVICE=drive\dir\EQNKVKBD.SYS
DEVICE=drive\dir\EQNKRCSH.EXE
CALL=drive\dir\EQNKRCLD.EXE
NOTE: When you are using the High Performance File System (HPFS), the
Installable File System (IFS) statement must appear before the DEVICE and
CALL statements.
2. Verify that all the files listed in the explanation are in the path where
the RWC is installed.
3.
o If you changed the CONFIG.SYS file, shut down and then restart the
workstation.
o If one or more RWC files is missing, deinstall and reinstall Netfinity
Server.
System Action: Processing terminates.
ΓòÉΓòÉΓòÉ 27. Help for EQN0507 ΓòÉΓòÉΓòÉ
Explanation: You tried to exit the client interface while the communication
lines were still open. Your confirmation will close all communications.
User Response: Press the 'Yes' push button to close all communications and
exit the client. Press the 'No' push button to cancel and to keep the client
and communications running.
Programmer Response: None.
System Action: If you confirm, processing ends normally and control is
returned to your operating system. If you cancel, the client and communications
keep running.
ΓòÉΓòÉΓòÉ 28. Help for EQN0512 ΓòÉΓòÉΓòÉ
Explanation: The communication link failed because of an undetermined error.
User Response: Restart the RWC session. If the communications continue to
fail, contact the system programmer.
Programmer Response: Verify that the network address parameters are correct.
System Action: The session terminates.
ΓòÉΓòÉΓòÉ 29. Help for EQN0523 ΓòÉΓòÉΓòÉ
Explanation: You could not start a session with the client for one of the
following possible reasons:
o Network address parameters (for example, the adapter address of the client)
are not valid.
o A cable is disconnected on the client.
o Resources required to start a session (such as threads, semaphores, queues,
and memory) may not be available on the manager or client.
User Response: Verify the following:
o That the client is running.
o That the network address parameters (for example, the adapter address of the
client) entered during configuration are correct.
o That all cables are connected.
o That system resources (such as threads, semaphores, queues, and memory) are
available on both workstations.
Programmer Response: None.
System Action: The session does not start and control is returned to your
operating system.
ΓòÉΓòÉΓòÉ 30. Help for EQN0526 ΓòÉΓòÉΓòÉ
Explanation: The session has ended. You have full control of your
workstation.
User Response: None.
Programmer Response: None.
System Action: Control is returned to the operating system. Your workstation
is ready for another session.
ΓòÉΓòÉΓòÉ 31. Help for EQN0527 ΓòÉΓòÉΓòÉ
Explanation: The client has ended the RWC session. You can start a new
session with the same or other available clients.
User Response: None.
Programmer Response: None.
System Action: The session ends and control is returned to the operating
system.
ΓòÉΓòÉΓòÉ 32. Help for EQN0528 ΓòÉΓòÉΓòÉ
Explanation: The session was terminated successfully at your request.
User Response: None.
Programmer Response: None.
System Action: The session ends, and control is returned to your operating
system.
ΓòÉΓòÉΓòÉ 33. Help for EQN0530 ΓòÉΓòÉΓòÉ
Explanation: The client interrupted the session in order to change to a new
state (for example, from controlling to monitoring). The session appears Busy
until the client chooses a new state.
User Response: Wait for the client to choose a new state. Otherwise, terminate
the session.
Programmer Response: None.
System Action: Processing continues, or, if you terminate the session,
processing ends.
ΓòÉΓòÉΓòÉ 34. Help for EQN0537 ΓòÉΓòÉΓòÉ
Explanation: An error occurred when starting the manager or client.
User Response: Retry. If the error persists, contact the system programmer.
Programmer Response: Verify the following:
o That the network address parameters are correct.
o That sufficient resources (such as threads, semaphores, queues, and memory)
are available for the RWC.
System Action: Processing terminates and control is returned to the operating
system.
ΓòÉΓòÉΓòÉ 35. Help for EQN0538 ΓòÉΓòÉΓòÉ
Explanation: Graphics applications that run in native DOS or on the virtual
DOS machine are not supported and cannot be displayed on your screen.
User Response: On the client, switch out of DOS or switch to an application
that is supported (for example, a text application).
Programmer Response: None.
System Action: Processing continues.
ΓòÉΓòÉΓòÉ 36. Help for EQN0539 ΓòÉΓòÉΓòÉ
Explanation: The manager workstation's code page is different from the
client's code page. A character typed on the manager workstation may be
displayed as a different character on the client
User Response: Press the 'OK' push button.
Programmer Response: None.
System Action: Processing continues.
ΓòÉΓòÉΓòÉ 37. Help for EQN0548 ΓòÉΓòÉΓòÉ
Explanation: The manager keyboard layout can be changed to match the client
keyboard layout for this particular client during this session. The keyboard
layout change will only affect this manager-client connection.
User Response: Press the 'Yes' push button if you want to change the manager
workstation keyboard layout to that of the client. Press the 'No' push button
if you do not want to change the keyboard layout.
Programmer Response: None.
System Action: Processing continues, depending on the user response.
ΓòÉΓòÉΓòÉ 38. Help for EQN0549 ΓòÉΓòÉΓòÉ
Explanation: Your workstation is not configured to support the requested
keyboard layout.
User Response: Press the 'OK' push button.
Programmer Response: None.
System Action: Processing continues, but the keyboard layout is not changed.
ΓòÉΓòÉΓòÉ 39. Help for EQN0555 ΓòÉΓòÉΓòÉ
Explanation: Because of an unexpected error, the session ends.
User Response: Restart the session. If the problem continues, shut down and
restart the client.
Programmer Response: None.
System Action: The RWC session ends.
ΓòÉΓòÉΓòÉ 40. Help for EQN0655 ΓòÉΓòÉΓòÉ
Explanation: The client workstation is already in session with a manager
workstation.
User Response: Retry later or attempt to establish a session with a different
client workstation.
Programmer Response: None.
System Action: Processing continues.