home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 8 Other
/
08-Other.zip
/
nf5200us.txt
< prev
next >
Wrap
Text File
|
1998-12-21
|
7KB
|
291 lines
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Fixes for Netfinity Manager/Client Services
Version 5.20.0
Installation Instructions README file
This README file contains information on downloading and installing
Fixes for Netfinity Manager and Client Services for Netfinity Manager.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
CONTENTS
________
1.0 Download and extraction instructions.
2.0 List of fixes and installation instructions.
3.0 Trademarks and Notices
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
1.0 Download and extraction instructions.
__________________________________________
The file containing the fixes is a self-extracting file. Place into a
directory of your choosing and execute. When extracted the directory
structure shown below will be created.
NF5200
|
US
|
+--NetWare
|
+--OS2
| +--Manager
|
+--Win95
| +--Manager
|
+--Windows
|
+--WINNT
+--Manager
Fixes are located in the directory for the named for the operating
system under which they apply.
Most fixes apply to both Netfinity Manager and Client Services. Any
fixes for Manager only are found in the \Manager directory.
2.0 List of fixes and installation instructions.
_________________________________________________
**********************************************************************
Problem description: Thresholds not surviving a system reboot when
set via Event Scheduler.
Applies to: Manager ONLY
Operating System: OS/2, Win95, WINNT
File(s): SCFMSDLL.DLL
Installation: Replace file
**********************************************************************
Problem description: Duplicate Update Connector Manager Icons appear
after upgrading over 5.10.3 or 5.10.4
Applies to: Manager ONLY
Operating System: WINNT
File(s): BDSVCINI.EXE
Installation:
1) Copy BDSVCINI.EXE to Netfinity directory, usually \WNETFIN
2) Go to a command prompt
3) Run BDSVCINI.EXE with the following parameters:
DEL 1 1 CyberX CyberB.java CyberG.java SVCRESRC 6 46 3028 3128 3228
4) Shutdown and restart NETFBASE
**********************************************************************
Problem description: File Transfer fails during directory transfer
when target directory already exist
Applies to: Client Services
Operating System: NetWare
File(s): FTBASE.NLM
Installation: Replace file
**********************************************************************
Problem description: NO VPD under NetWare on Netfinity 7000
Applies to: Client Services
Operating System: NetWare
File(s): SINFB30.NLM
SYSTM002.NLM
Installation: Unload NETFBASE, replace files, load NETFBASE
**********************************************************************
Problem description: NO VPD under OS/2 on Netfinity 7000
Applies to: Manager & Client Services
Operating System: OS/2
File(s): SINFB30.EXE
SYSTM002.DLL
Installation: Stop NETFBASE, replace files, start NETFBASE
**********************************************************************
Problem description: SNMP service was not stopped, holding open
NFNAME32.DLL and WNFIPC32.DLL. These
files were not being updated during an
install over.
Applies to: Manager and Client Services
Operating System: WINNT
File(s): NETFINST.EXE
Installation: Replace file
**********************************************************************
Problem description: No doumentation indicating the command
NFUNINST /R: will cause a removal
Netfinity without user intervention.
Applies to: Manager and Client Services
Operating System: Win95, WINNT
File(s): NFUNINST.EXE
Installation: None
**********************************************************************
Problem description: On a RAID system, when using WIN NT. Capacity
Management does not plot a data point for
DISK WORKLOAD monitors until the workload is
held above 1mb long enough for the polling
cycle.
Applies to: Manager and Client Services
Operating System: WINNT
File(s): CMBASE.EXE
Installation: Replace file
**********************************************************************
Problem description: Win-OS2 programs not closing correctly after
Netfinity is installed
Applies to: Manager & Client Services
Operating System: OS/2
File(s): EQNSEADA.EXE
Installation: Replace file
**********************************************************************
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
3.0 Trademarks and Notices
__________________________
The following terms are trademarks of the IBM Corporation in the
United States or other countries or both:
IBM
Netfinity
OS/2
DB2
IPX, Novell, and NetWare are trademarks of Novell, Incorporated.
Lotus and Lotus Notes are trademarks of Lotus Development Corporation.
Windows, Windows 95, Win32, and Windows NT are trademarks of Microsoft
Corporation.
DMI is a trademark of the Desktop Management Task Force.
THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM
DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING
WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR
PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS
DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY
PATENTS OR COPYRIGHTS.
Note to U.S. Government Users -- Documentation related to restricted
rights -- Use, duplication or disclosure is subject to restrictions
set forth in GSA ADP Schedule Contract with IBM Corp.