home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 8 Other
/
08-Other.zip
/
lcf.zip
/
LCF.TXT
Wrap
Text File
|
1994-09-25
|
31KB
|
770 lines
LCF Information ForeFront Software Inc. Page 1
─────────────────────────────────────────────────────────────────────
LAN Configuration Facility (LCF)
────────────────────────────────
September 26, 1994
ForeFront Software Inc.
2202 - 2 Ave. NW Voice: (403) 270-8000
Calgary, Alberta Fax: (403) 270-0372
Canada T2N 0G9 CompuServe: 73110,722
In Europe:
Richard Clement EDV Beratung Voice: +49-(0)6183-72918
Grimmelshausenstrasse 40 Fax: +49-(0)6183-74744
63526 Erlensee BBS: +49-(0)6183-74270
Germany CompuServe: 100111,655
NOTE: This file is formatted for approx. 50 lines per page, and laid
out for printing on a laser or inkjet printer; if you do not
have such a printer, you may want to strip out the ─ and ═
characters before printing.
TABLE OF CONTENTS
═════════════════
What is the LCF? (the short answer)................................ 2
Origin............................................................. 2
Features........................................................... 3
Benefits........................................................... 4
Operating Environment.............................................. 6
Price List......................................................... 7
Technical Question and Answers..................................... 8
Trial Information................................................. 15
(C) Copyright 1993, ForeFront Software Inc.
(C) Copyright 1991-93, Royal Bank of Canada
All rights reserved.
LCF Information ForeFront Software Inc. Page 2
─────────────────────────────────────────────────────────────────────
WHAT IS THE LCF? (the short answer)
═══════════════════════════════════
The LAN Configuration Facility (LCF) is a software replicator which
has reconfiguration capabilities. It runs under OS/2 and has the
ability to distribute, install and configure OS/2 systems, services
and applications.
The software to be installed is first set up on a reference system.
It is then uploaded to an LCF code server to create an image and this
image is propagated to any number of systems.
In the case when a whole partition is imaged, the resulting systems
are images of the reference. Herein lies one of the strengths of the
LCF: the desktop's look and a myriad of options are all installed
identically making the systems easy to support and consistent for its
users.
An image need not consist of a whole partition however, it is
possible to image only parts of a reference system, down to the file
level. Various images can later be merged at installation time.
ORIGIN
══════
In 1990, the Royal Bank of Canada selected OS/2 as its primary
workstation and server operating system. All of the bank's new
mission critical applications are developed under OS/2 and the large
majority of servers are currently OS/2, including those in its 1,700
branches. Over the next 3 years the bank plans to have 75% of its
DOS workstations migrated to OS/2. As well, the bank has upward of
1,200 developers, 1/3 of which use OS/2.
The enormous cost associated with installing and configuring all of
these OS/2 systems lead to the bank's development of the LCF. With
the LCF, OS/2 mission critical workbenches can be customized and
thoroughly tested at the development center and then distributed
outward from there. This creates systems which can be maintained and
supported in a cost effective manner.
In late 1992, ForeFront Software was established to bring the LCF to
market.
LCF Information ForeFront Software Inc. Page 3
─────────────────────────────────────────────────────────────────────
FEATURES
════════
* An administrator can customize packages for later installation over
the LAN.
* Packages are stored in a central library at the LCF code server
(the code server is simply an OS/2 workstation, it need not be a
network server).
* Packages are composed of files and directories and can consist of
operating systems (OS/2 or DOS), products (Windows) and
applications.
* An administrator can push packages to unattended workstations
running on the LAN (these workstations must be running OS/2). This
feature requires the LCF Agent program to be pre-installed on the
target workstations. The LCF Agent is an optional component.
* An administrator can create scripts to enable users to install and
configure the packages. The scripts can be set up to prompt the
user for input or to work without any prompting at all.
* A user can run the scripts to pull packages from the code server
library. The script/package combinations are selected from simple
pull-down menus.
* User preferences can be stored at the code server and used to
customize the system at installation.
* The package can be customized based on the specific features of the
machine it is installed on.
* The installation of an OS/2 package can be done from a two diskette
"seed system" when necessary. This is used when the target system
does not yet have OS/2 on it such as when recovering from a hard
disk failure.
* Scripts can be run on unattended remote workstations to perform
administration tasks such as virus detection or auditing. Again,
this feature require the LCF Agent component.
LCF Information ForeFront Software Inc. Page 4
─────────────────────────────────────────────────────────────────────
BENEFITS
════════
SPEED
─────
* Installation can be done at LAN speeds.
EASE OF USE
───────────
* Users can install software without having to deal with the
complexity of installation programs. They need only pick from a
menu and start the installation process. All the necessary
installation tasks were performed when the package was created.
* Developers and support staff can pull specific packages for problem
re-creation and regression testing.
STANDARDIZATION
───────────────
* Systems and applications can be tailored to company standards and
made readily available to users.
SUPPORT
───────
* Pre-tested and customized packages are easier to support and
maintain.
* The packages can be pre-tuned by an expert. The script can be used
to select file systems, position and size the swap file, print
queues, etc., as well as set desktop options.
* Automatic customization to user preferences saves user time and
minimizes user resistance to the installation of new releases and
maintenance.
* The ability to run a script on remote workstations can be used to
centrally execute virus checking, auditing and most other LAN
administration programs.
LCF Information ForeFront Software Inc. Page 5
─────────────────────────────────────────────────────────────────────
RECOVERY (DISASTER RECOVERY)
────────────────────────────
* Critical workstations such as servers and gateways can save their
operating systems and other software as packages for quick
restoration in case the hard disk ever needs replacing.
COST SAVINGS
────────────
* Systems can be configured in ways which are impossible with the
regular installation program. For instance, a package can be
customized where parts of the regular system, such as help folders
and the tutorial, are stored at a LAN server to minimize each
workstations disk usage.
OTHER
─────
* Software does not have to be CID enabled to be distributed,
installed and configured by the LCF.
LCF Information ForeFront Software Inc. Page 6
─────────────────────────────────────────────────────────────────────
OPERATING ENVIRONMENT
═════════════════════
HARDWARE REQUIREMENTS
─────────────────────
LCF Code Server
- Minimum 8 MB of main memory.
- 12 MB of hard disk space plus an amount equal to the size
of the images being stored. Images are not compressed.
Images may be stored on the LAN server if the code server
is also a LAN requester.
LCF Client (Target Workstation)
- Requirements dictated by software being installed.
- OS/2 2.0 install requires 6 MB of main memory.
LCF Agent
- 500K hard disk space.
SOFTWARE REQUIREMENTS
─────────────────────
LCF Code Server
- OS/2 2.x with REXX support installed.
LCF Client
- OS/2 1.3, 2.x
LCF Agent
- OS/2 1.3, 2.x
NETWORKING REQUIREMENTS
───────────────────────
All Components
- NetBios (available with Lan Server, Lan Manager, NTS/2,
NetWare Requester, ...)
LCF Information ForeFront Software Inc. Page 7
─────────────────────────────────────────────────────────────────────
PRICE LIST
══════════
Price for one Code Server capable of
supporting 3 concurrent LCF Clients ........... $1500.00
Each additional concurrent access for above .... $500.00
Price per workstation for LCF Agent ............. $10.00
Note: An Agent is required to allow unattended installation and to
enable the administrator to remotely run programs and scripts on the
workstation. This component is optional.
The following discounts apply to the LCF Agent price based on
the number of these purchased:
Minimum Quantity Applicable Discount
──────────────── ───────────────────
100 7%
500 15%
1000 20%
1500 22%
2000 25%
New releases and levels of the LCF are supplied on demand to
customers at the cost of shipping and handling. These updates are
also placed on CompuServe and are available there at the cost of
downloading.
All prices are in US dollars.
Prices effective: August 23, 1993
Prices subject to change without notice.
LCF Information ForeFront Software Inc. Page 8
─────────────────────────────────────────────────────────────────────
TECHNICAL QUESTIONS AND ANSWERS
═══════════════════════════════
This section answers some of the most frequently asked questions
about the LCF.
LCF Operation
─────────────
Q1: How does the LCF work?
The LCF is a client-server application which runs under OS/2. The
LCF server (the code server) is a repository for software images.
These images are referred to as packages in LCF terminology.
Software to be distributed by the LCF is first installed on a PC
called the reference PC. The installation program supplied by the
vendor is used. The software can be customized to local
preferences and tested. An LCF package is then created from the
customized software by starting the LCF client program on the
reference PC. The LCF client program runs a script which copies
the package's files and directories to the LCF code server. The
copy is done over the LCF's NetBIOS session.
The packages are distributed from the code server by starting an
LCF client on each target PC. Again, this client runs a script.
The script can optionally invoke OS/2 disk utilities such as FDISK,
FORMAT and CHKDSK to prepare the hard disk. The script will copy
the files and directories that make up the package to the hard disk
over the NetBIOS session to the code server. After the files have
been brought down, the script can run other LCF script commands to
reconfigure the image if required.
When an OS/2 system is being installed, the script runs various
OS/2 programs such as SYSINSTX and MAKEINI to install an OS/2 boot
record or generate the OS/2 Workplace shell INI files. By using
OS/2 supplied routines, the results are identical to those the OS/2
installation program would have generated.
LCF Information ForeFront Software Inc. Page 9
─────────────────────────────────────────────────────────────────────
Q2: How is an LCF client initiated?
There are several methods which start an LCF client. The major
problem to avoid is running into files which are in use and locked
by OS/2. One of the following methods will avoid locked files:
1. The client can be started from seed diskettes. This involves
booting OS/2 with the installation diskette and using an LCF
generated diskette as disk 1 after the IBM logo comes up. The
"disk 1" that the LCF will generate contains basic OS/2
functionality, minimal LAN routines to provide NetBIOS access
and a small LCF program called the Boot Strap program. It is the
LCF Boot Strap program which pulls down the LCF client and
associated files from the code server.
2. The client can be started by invoking the Boot Strap program
directly. As noted in #1 above, this will copy down the LCF
client and any files it needs to run. This is usually how an
LCF is started when application software is being requested.
The LAN administrator can set up menus that allow the user to
pick packages for downloading.
The LCF client can be invoked in this way to install an OS/2
system when the system is to be installed on a different
partition than the one currently booted. LCF provides a package
which can be used to create a Mini-OS/2 for doing such
installations. This Mini-OS/2 only requires a 3 Megabyte
partition.
3. From their PC, administrators can initiate a script on any other
PC which has the LCF Agent program installed. This agent is a
"mini-server" which can be used to run programs at the target PC
and enable files to be copied to and from the target. The agent
can, in turn, start an LCF client program at the target
workstation to perform package installation in unattended mode.
Q3: Which network operating system does LCF support?
LCF requires NetBIOS support which is available with most LAN
operating systems. The LCF server can run on any OS/2 platform.
The platform does not have to be a network server.
The LCF does not require a network requester layer to run. It is
able to install network requesters without requiring access to the
server. LCF is capable of installing the servers for LAN Server
and LAN Manager.
LCF Information ForeFront Software Inc. Page 10
─────────────────────────────────────────────────────────────────────
LCF can be used to take a backup image of OS/2 servers and gateways
so their hard disks can be restored at LAN speeds should
replacement be required.
Q4: What programs can be run by LCF on unattended PC's?
Any non-PM OS/2 program can run under control of the LCF Agent.
This has been used to run such programs as McAfee's virus scanner.
Once the program has run, its report files can be copied back to
the code server or administrator machine by the script.
Q5: How many code servers do I need?
In most cases a single code server is sufficient. The code
server's NetBios access will pass through LAN bridges and some
routers. On a NetWare LAN, Novell's NetBios simulator, which
encapsulates the NetBios packets inside IPX, is routable.
The code server can be installed on a portable PC and taken from LAN
to LAN if desired. In some cases, the code server has been placed
on a laptop and used by the repair personnel after a hard disk
failure to reinstall OS/2 and mission critical applications. This
laptop can be used with two pocket adapters and a cable to allow
recovery of non-LAN attached PC's.
Q6: How is a software library set up?
A software library is a repository of packages that have been made
available to the user. The packages are created as usual by an
administrator. The administrator places the package name and its
description on the menu of available packages that users see when
they start up the LCF client. The administrator can set up group
or individual menus allowing different views of the library.
Reconfiguration
───────────────
Q7: What is involved in LCF image reconfiguration?
After a package is copied onto the target PC's hard disk, it may
require reconfiguring. This allows the reference system and target
systems to be different in their hardware configurations, e.g. they
may have different adapter cards installed. Note: it is usually
possible to prepare an image so it needs little or no
reconfiguring.
LCF Information ForeFront Software Inc. Page 11
─────────────────────────────────────────────────────────────────────
The LCF provides several script commands to reconfigure an image.
Some of these are:
* The MAKE command can be used to adjust text configuration files
such as CONFIG.SYS, PROTOCOL.INI, WIN.INI, etc. to the target PC.
The LCF client program determines the hardware environment and
sets variables which are used to regenerate these files.
* The MAKEINI command runs OS/2 MAKEINI command in order to
regenerate the Workplace shell INI files. This command is used
to upgrade the Workplace shell desktop across OS/2 releases or to
install an OS/2 package to a different drive letter than its
image had at the reference PC.
* The CMD and LOCAL commands allow OS/2 programs and command files
(REXX included) to be run on the server or the client as part of
the script. This can be used to reconfigure the environment for
programs which have special needs.
Q8: Can the image be modified once it is at the code server?
Yes. The directories and files that make up the image are stored
uncompressed in a directory tree similar to what existed at the
source PC.
DOS and Windows
───────────────
Q9: Can LCF be used to install DOS and Windows?
LCF will install DOS and Windows and the software that run in these
environments. The LCF reconfiguration facilities can be used to
adjust the appropriate CONFIG.SYS and INI files. The installation
must be done by running OS/2 on the target system. This is
frequently done by using the LCF seed diskette system. Since the
LCF Agent cannot run under DOS, a system running DOS cannot support
LCF unattended installation.
It is very important that the LCFBOOT utility program be used to
adjust the DOS boot sector after replicating a DOS image. The
program must also be used after replicating an OS/2 system that
includes the dual-boot feature.
LCF Information ForeFront Software Inc. Page 12
─────────────────────────────────────────────────────────────────────
OS/2 Desktop
────────────
Q10: How does the LCF handle the OS/2 Workplace shell?
The Workplace shell's INI files are binary files which cannot be
adjusted with the LCF MAKE command. Instead, the LCF runs OS/2's
MAKEINI or its own INI merge/copy programs under script control
when changes are required to these files. There are several
methods of handling the desktop:
1. If an OS/2 image is replicated without any changes to drive
letters, then either the source system's desktop or the target
system's desktop can be installed on the target. In this case,
MAKEINI is not run.
2. If the image is replicated across drive letters, that is, if
desktop objects have different drive references on the target
system than on the source system, MAKEINI is run to correct the
drive references when the source desktop is to be used. If the
target's desktop is to be kept, the drive references will
already be correct and MAKEINI is not required.
Note: In both case, the LCF INI merge/copy programs and REXX can
be run to add or delete applications from the resulting system.
Q11: Can LCF upgrade desktops from OS/2 2.0 to 2.1?
Yes. The INI files, desktop directories and "WP ROOT. SF" are
deleted from the 2.1 image and a MAKEINI is run after the OS/2
system files have been brought down. This upgrades the 2.0 desktop
as if MAKEINI had been run under the OS/2 installation program.
LCF Scripts
───────────
Q12: Does the script run on the client or the server?
LCF scripts always run under the client. The script requests
services of the LCF Server or the LCF Agent program which resides
at the other end of the NetBIOS session.
LCF Information ForeFront Software Inc. Page 13
─────────────────────────────────────────────────────────────────────
Q13: Is the script language complex?
The script language was designed to be very simple to use. A
script is made up of a list of commands within sections. Sections
are either executed or excluded based on script variables which can
be set in a number of ways:
1. The LCF sets certain variables based on the machine environment.
2. The administrator can preset certain variables for a given user
or group of users.
3. If desired, variables can be solicited from the user with menus
and panels.
Variables are also used for substitution within the script body.
The script language does not support branching or any other
complexity which might make the script hard to use and yet it
provides all the power needed to control the facility.
Audit Logs
──────────
Q14: Is there any LCF auditing?
The LCF produces an audit log at both ends of the client-server
session. This allows an administrator to review each step of an
installation run. The audit log produced at the client program can
be automatically "pushed back" to the LCF server.
PC/Workstation Naming
─────────────────────
Q15: How does LCF identify PCs?
The LCF uses the universal address of a PC's network adapter to
uniquely identify each client and server. A feature provided by
the LCF, called Name Resolution Services, converts the unique name
into an installation assigned name if desired. This feature runs a
command file at the code server on behalf of each client when they
startup. The installation can modify this command file to do name
resolution in any manner desired.
All audit logs files are stored at the code server with the name
that is returned by the Name Resolution Service. Special group
options and user preferences can be stored at the code server in
user directories. These can be pulled down when scripts run on
the user's PC.
LCF Information ForeFront Software Inc. Page 14
─────────────────────────────────────────────────────────────────────
LCF and CID
───────────
Q16: Do products have to be CID enabled to be installed with the LCF?
No, products do not have to be CID enabled to be installed with the
LCF. Response files are not required because the installation
program has already been run for software which is being
replicated.
Q17: How does LCF compare to CID?
CID was announced by IBM in October 1992. CID is a process, not a
product.
CID utilizes the application's install program at the target
machine each time it performs an installation. This means that:
1. The application being installed must be CID enabled by its
developer.
2. The administrator has to set up response files which contain all
the replies to installation prompts which the installation
program may use unless the installation program's defaults are
wanted.
The LCF is a replicator with reconfiguration capabilities. Because
a system's image is replicated, it is the best way of propagating
software when many identical systems are required. This is exactly
what is required when installing a set of line-of-business systems.
The LCF also allows you to do the following which are hard or
impossible to do if you run the installation programs for a set of
software each time:
* The LCF can be used to install drivers that the installation
program doesn't know about.
* It allows the administrator to tune the configuration in ways
that would never be possible with a product's installation
program.
* One can propagate special hybrid systems where components are
offloaded to LAN servers. An example of such a hybrid would be a
system where the help files and infrequently used folders are
placed on the LAN server to save disk space at each workstation.
LCF Information ForeFront Software Inc. Page 15
─────────────────────────────────────────────────────────────────────
TRIAL INFORMATION
═════════════════
An LCF trial can be installed in an hour or less. After installing
the LCF, its Installation Verification Procedure (IVP) can be used to
take an image of an existing OS/2 system and install it on another
machine. The IVP's imaging and installation operations will run at
about the speed that an XCOPY command runs on your LAN today.
This IVP requires OS/2 machines for the code server, reference and
target systems. The reference and target machines could be the same
for the purposes of the IVP.
Getting an LCF Trial
────────────────────
The LCF software can be downloaded from CompuServe, several popular
OS/2 bulletin boards or it can be obtained on a diskette by
contacting ForeFront Software or Richard Clement EDV Beratung at
the phone number noted on page 1. In Europe, the LCF can be
downloaded from the BBS whose number is given on page 1.
On CompuServe the LCF trial is contained in a file called LCFnnn.ZIP
which can be found in library 1 of the OS2AVEN forum. In the above
file name, nnn represents the version and release of the latest LCF
software so use the file with the greatest nnn you find. The trial
has a similar file name on other bulletin boards.
Once downloaded, the file should be unzipped into its own directory.
This will produce 4 files, one of which is the INSTALL command. The
command can be run and the first action on the install menu can be
used to read the ReadMe.INF file which will also have been created by
unzip.
LCF Information ForeFront Software Inc. Page 16
─────────────────────────────────────────────────────────────────────
LCF Authorization
─────────────────
IN ORDER TO RUN THE LCF AN AUTHORIZATION CODE MUST BE OBTAINED FROM
FOREFRONT SOFTWARE OR RICHARD CLEMENT EDV BERATUNG AND THE CODE MUST
ENTERED WHEN THE INSTALLATION PROGRAM PROMPTS FOR IT.
The authorization code serves the following purposes:
1. It allows us to distribute the full function LCF product for
trial. The product has not been crippled in any way and
performs exactly like the production version because it is the
production version.
2. It expires the trial after 30 days while still allowing for
extensions without a need to reinstall anything.
3. It allows the expiry feature to be permanently removed in order
to create a production LCF. This means that you can start
running the LCF in production mode without reinstalling and
without lose of any customization you may have performed
during the trial.
4. It allows us to keep track of LCF trials so that we can obtain
feedback from which we can improve the product to meet your
needs.
The LCF installation can be performed without the authorization code
and the INSTALL command rerun later to perform the authorization part
only.
The authorization code is not needed to access the documentation.
Instructions for obtaining the authorization code are contained in
ReadMe book and are also provided when the INSTALL command is run.
LCF SUPPORT
───────────
LCF is supported on CompuServe in section 1 of the OS/2 Vendor A
forum (GO OS2AVEN) and by phone or fax at the numbers given on page
1.
*** The End ***