Hello, i do not work for Iomega, but, i am including this file to point out some of the problems i had and the solutions i came up with.
First: I know nothing about the paralell version and os2
Second: i could not get Iomega's Zip-Zooom scsi adapter to work with these drivers and os/2
Third: i was able to get these drivers to work very well with an adaptec card (1522). I will go out on a limb and say these drivers will work with any adaptec card. You are on your own from there.
**************** Very Important ************************
Do not remove a disk without first rebooting. These disks are not hot swappable UNLESS ypu read and follow the following...(worked for me)
the eject command on th pull down menu CANNOT BE USED without DATA LOSS unless lazy write is turned off for the file storage maethod being used (HPFS or FAT)
Since it is not reccomended that HPFS lazy write be turned off, i turned off the fat lazy write in the config sys.(performance will suffer in writing to disk, but you can hot swap, i would only recommend this if HPFS is your primary file system)
it will be on your diskcache line if it is enabled
i/e
diskcache=512 ,lw, etc....
if you take out the lw on this line and use FAT for the cartriges hot swapping doesnt seem to be a problem.
I have called ibm and iomega to try to get HPFS hot swap fixed.
if enough other people call maybe they will do something.
