home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 4 Drivers
/
04-Drivers.zip
/
wacomos2.zip
/
SETUPOS2.TXT
next >
Wrap
Text File
|
1994-09-30
|
3KB
|
84 lines
INSTALLING WACOM TABLET AN OS/2 PENPM MACHINE
DIP SWITCHES CAN BE CHANGED TO UP THE DATA RATE.
When the pinstall program requests a drive and directory, for the
PenPM device driver, enter this drive and directory. Depending on
the version of pinstall.exe the driver may or may not install
correctly. If it does not install properly, follow the instructions below
This driver was tested with a PL100V, SD-510, ArtPad, UD-0608, and SD-42x
tablets.
It 'should' work with other wacom tablets.
Let me know if it does not and I will fix it.
*
* dip switches on the 510 or 42x to binary and 19200 baud
* as derscribed below
*
* baud rate: +19200 -9600
* \ /
* binary \ /
* / /
* + + - - - - - - + + ? - - - - + + + + + + + - -
You can also install the driver for the wacom SD-510C from the
IBM disks and modify your config.sys file as described below.
Copy the file wacomos2.sys from this disk to the hard drive.
Modify the OS2 config.sys file so that the line that says
"DEVICE=C:\.....\PENDD.SYS"
points to the wacomos2.sys file from this disk.
Modify the "TYPE=" argument, so it reads "TYPE=" TABLET_NUMBER.
TABLET_NUMBER is defined below for all different tablets:
SD 510 1
SD 420 2
SD 320 3
SD 310 4
SD 210 5
SD 110 6
SD 113 7
SD 010 8
SD 013 9
10 // reserved
MS 2000 11 // untested
PL 100V 12 // at standard resolution
PL 200V 13 // at standard resolution
PL 102V 14 // at standard resolution
PL 100V 15 // at European resolution
16 // reserved
17 // reserved
UD 0608 18
ArtPad 19
20 // reserved
21 // reserved
22 // reserved
UD 1212 23
UD 1218 24
If you will be using a wacom pressure stylus on an SD tablet, add an
argument to the "DEVICE=.....\WACOMOS2.SYS"
"PRESS=1".
Otherwise the driver expects a non pressure stylus.
If you will be using a wacom tablet on Comm2 add another argument to
this line: "COMM=2".
Otherwise the driver expects the tablet to be on Comm1.
If you will be using a wacom tablet at 9600 baud add another argument to
this line: "BAUD=1".
Otherwise the driver expects the tablet to be configured for 19200 baud.
Re-boot OS/2.
Pressure readings from the tablet should be available to PenPM
programmers according to IBM specs.
Direct any questions about setup or driver updates to Tom Picard
at Wacom Technology (206)750-8884 ext 141. Fax (296) 750-8924.