home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 4 Drivers
/
04-Drivers.zip
/
s4aos2.zip
/
README.TXT
< prev
next >
Wrap
Text File
|
1995-04-17
|
6KB
|
152 lines
Installation Instructions
Reveal SC400r4A Sound Card Device Driver version 1.00
*** Support for IDE CD-ROM's Only in this version ***
For OS/2 Warp 3.0
note: check the main chip on your Reveal Sound Card. If it does not say
SC400r4A or 4A then this driver will not work for you. Should there be any
question, please call Reveal Support.
A. Installation of Reveal SC400r4A OS/2 Warp Device Driver
=================================================================
I. For Non-existence of other Audio Adapters
--------------------------------------------
In the process of installing OS/2 Warp with the sound card in the system,
the "Multimedia Device Support" under "System Configuration" screen will
display "Sound Blaster Pro (MCV or OPL3)". This has to be removed before
installing the Reveal SC400r4A Sound Card device driver. Please follow the
following steps :
0. Skip steps 1 to 5 if OS/2 Warp has already been installed.
1. Click at the icon beside the "Multimedia Device Support" when the
"System Configuration" screen pops up during the installation
process.
2. Remove the Drivers from the "Device[s] in System to be install".
3. Select O.K. The [None] option will be shown at the "Multimedia
Device Support".
4. Select O.K again and continue with the rest of the instruction to
complete the installation of OS/2 Warp.
5. Shut down and reboot the system after the installation is completed.
6. Select <Multimedia Application Install> from the Multimedia folder.
7. Insert Reveal SC400r4A OS/2 Warp Audio Driver Diskette in drive A:
or B:.
8. Change the source drive to where the Reveal SC400r4A OS/2 Warp
Audio Driver diskette is. (i.e. A:\ or B:\).
9. Highlight "Sound Galaxy" feature and then select "Install".
10. Select "YES" in "Change CONFIG.SYS" dialog box and continue with
driver installation.
11. Select "1" when the system prompts you to select the number of
Sound Card.
12. It is recommended that you use the default settings when the
Sound Galaxy Sound Card Installation screen appears.
13. System will then update the CONFIG.SYS file, and please follow
the on screen instructions to continue the installation.
14. Shut down and reboot the system after installation is completed.
II. For existence of other Audio Adapters
-----------------------------------------
If any Audio Device Driver is currently installed, it has to be removed
before installing the Reveal SC400r4A Sound Card Device Driver. Refer to
the corresponding audio adapter manual or readme.txt for more details.
For example, if Sound Blaster Pro device driver is installed, the
following lines must be removed from the respective files.
CONFIG.SYS file
Device=C:\MMOS2\SBP2D2.SYS 1 1 5 220 4 /N:SBAUD1$
Device=C:\MMOS2\AUDIOVDD.SYS SBAUD1&
MMPM2.INI file
[Drivers]
Waveaudio = IBMWAVESB01
Sequencer = IBMSEQSB01
Ampmix = IBMAMPMIXSB01
After all the previously loaded audio device driver has been removed
and the system rebooted, follow steps 6 to 14 in Part I to install
the Reveal SC400r4A Sound Card Device Driver.
B. De-installation of Reveal SC400r4A OS/2 Warp Device Driver
====================================================================
To de-install the Reveal SC400r4A Device Driver, the following lines
must be removed from the respective files.
CONFIG.SYS
Device=C:\MMOS2\AZT16DD.SYS /B:530 /D:0 /I:10 /M:1,330,5 /N:AZT161$
Device=C:\MMOS2\SGAUDVDD.SYS AZT161$
MMPM2.INI file
[Drivers]
Waveaudio = IBMWAVEAZT1601
Sequencer = IBMSEQAZT1601
Ampmix = IBMAMPMIXAZT1601
C. Installation of Reveal SC400r4A WIN-OS/2 Device Driver
================================================================
Please note that any previously installed Windows sound card driver
has to be removed before installing the WIN-OS/2 driver.
1. Open the WIN-OS/2 folder from the OS/2 SYSTEM COMMAND PROMPTS folder.
2. Open the CONTROL PANEL from the WIN-OS/2 MAIN Group.
3. Double click on the DRIVERS icon.
4. Choose the "ADD" button to add a new driver.
5. Highlight the "Unlisted or Updated Driver" item and then select the
"OK" button.
6. Enter the drive and the path (i.e A:\WIN_OS2) in the Install
Driver windows and then select "OK" button.
7. Highlight the "16-bit Audio Driver" in the list windows and press
"Enter" to continue.
8. Use the default setting in 16-bit Audio Board setup windows.
9. Select "Restart Windows Now" to restart the Windows in order for
the added driver to take effect.
Note : As WIN-OS/2 is not 100% compatible with Microsoft Windows Sound System,
there might be problems encountered when running Voyetra application
like Audiostation and MIDI Orchestrator in WIN-OS/2 platform. To play
WAV or MIDI files, please use MediaPlayer in WIN-OS/2 instead.
------------ The End -------------