home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 4 Drivers
/
04-Drivers.zip
/
os2xl221.zip
/
README.OS2
next >
Wrap
Text File
|
1994-05-13
|
1KB
|
37 lines
Comment: To install XL221 in os2 systems, the address setting on the xl221
card mustn't be setted to address C800 and port 140.
Procedure to Intall os2 driver for XL221
Case 1: Install on a existing os2 system
1. Boot up machine.
2. Open the "OS2 system folder", then open the "system setup" folder,
double click on "Device driver install". Or you can type the
"DDINSTALL" command in a os2 command prompt.
3. Put os2 driver into drive a. Press Install.
You have to reboot the machine to let the change take effect.
Case 2: Fresh install os2 on a pc.
1. Follow the os2 installation guide untill enter the os2 system
configuration.
2. Mark the "Install device support driver" selection, press enter.
Put disk in drive a. press install.
Case 3: CDROM install.
1. Follow the installation guide, make the copy of two disk
(installation disk and disk 1).
2. Copy the files xl221.add and xl221tst.exe from the driver disk to the
copy of "disk 1".
3. Edit the file CONFIG.SYS on the copy of "disk 1" by adding the following
line:
basedev=xl221.add
4. Place the copy of "installation disk" in the a: drive and reboot the pc.
Proceed with the os2 installation process.