home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 4 Drivers
/
04-Drivers.zip
/
os2_0926.exe
/
AUDHELP.HLP
(
.txt
)
< prev
next >
Wrap
OS/2 Help File
|
1995-02-22
|
2KB
|
59 lines
ΓòÉΓòÉΓòÉ 1. Help for Selecting Number of Adapters ΓòÉΓòÉΓòÉ
This window selects the maximun number of Soundscape cards that are installed
in your machine. Currently the you many only have ONE Soundscape installed at
a time.
If you select zero, then you will de-install all Soundscapes that have been
previously installed by MMPM/2.
ΓòÉΓòÉΓòÉ 2. Help for selecting Soundscape values ΓòÉΓòÉΓòÉ
This screen lets you change the default values for the Soundscape.
If you choose Close from the system menu, the selected values are set back to
the default values.
Select Ok to save the selected values and continue.
BASE Port
This field lets you change the base port address of the Soundscape card the
card may reside at one of several address. If there is a conflict with another
card in the system, unpredictable results may occur.
Valid base port addresses are:
320h, 330h, 340h, and 350h 330h is the default value.
Wave Port
This field allows you to modify the Wave Port address. The wave port is the
base address where the 1848 resides. The 1848 is responsable for generating
all of the digital effects such as voices.
Valid wave port addresses are:
534h, 608h, E84h and F44h 534h is the default value.
DMA Channel
This field allows you to select the DMA channel for the Soundscape you have
installed in your system. Use the drop down box to set the correct DMA channel
for this card.
The valid DMA Channels are:
0, 1, and 3 DMA Channel 1 is default.
Interrupt Level
This field allows you to select the interrupt level for the Soundscape you have
installed in your system. Use the drop down box to set the correct interrupt
level for this card.
The valid interrupt levels are:
2/9, 5, 7, and 10