home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 4 Drivers
/
04-Drivers.zip
/
buslide2.zip
/
README.OS2
< prev
Wrap
Text File
|
1995-05-11
|
1KB
|
39 lines
OS/2
This README file explains the Driver Installation and Removal and provides the
latest updated information not included in the printed documentation.
(A). Please be advised that this OS/2 2.X/Warp 3.0 driver supports ISA/VL/PCI
IDE caching controllers.
(B). Driver Installation:
1. Insert the BusLogic driver diskette into the floppy drive
2. Under OS/2 V2.X/Warp 3.0, install the driver by keying the following
command:
[C:\] ddinstal
3. Set the source drive letter to reflect the floppy drive containing
the driver diskette
This command copies the file, OS2_32.ADD, from the driver diskette
to C:\OS2 directory and the config.sys is modified to load
OS2_32.ADD.
The following lines in the config.sys are modified:
basedev = OS2_32.ADD
rem basedev = IBM1S506.ADD
4. Re-boot the system
(C). Driver Removal:
1. During the driver installation, the original CONFIG.SYS under your
C:\ directory was renamed as CONFIG.1. To remove the driver, rename
CONFIG.1 back to CONFIG.SYS by typing the following command:
[C:\OS2] COPY CONFIG.1 CONFIG.SYS
2. Re-boot the system