home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 4 Drivers
/
04-Drivers.zip
/
adi2drv.zip
/
DOS_HIST.TXT
< prev
next >
Wrap
Text File
|
1994-10-28
|
7KB
|
146 lines
Change history of ADI2 DOS device driver
ADI2C1.15.SYS 1st released driver. Baseline version for this
revision history
ADI2C116.SYS Support for new configuration address in revision
'B' silicon added (0AD4 hex )
ADI2C117.SYS Drive table expanded
ADI2C118.SYS BUGFIX: hangs when no ADI2 present
Re-write Interrupt controller conflict test for
better accuracy
ADI2C119.SYS Add automatic support for PIO Mode 3 drives
ADI2C120.SYS Fix PIO Mode 3 support
Internal code rearrangment
ADI2C121.SYS Drive table revisions only
ADI2C122.SYS Drive table revisions only
ADI2C123.SYS Drive table revisions only
ADI2C124.SYS Drive table revisions only
ADI2C125.SYS Drive table revisions only
ADI2C126.SYS Add in code to detect non-turbo operation that
interferes with our system speed measurement and
causes us to set incorrect register values.
Add command line overrides for speed detection:
speed=33...
Add support for Translating BIOSes
Add minimal LBA support (only used when possible
instead of translation code)
[NOTE: no other LBA support is present: this does
not include support for drives >512 MB]
ADI2C127.SYS Drive table update
ADI2C128.SYS Internal reorganization for cleaner operation
Fix sign-on banner when 2 Mode 3 drives are present
ADI2C129.SYS Modify non-turbo detect to catch EFAR chipset
Slow down Conner CP3104, Add CP30344
ADI2C130.SYS Fix drive table lookup that was checking 1 too few
characters
Add drive table date to sign-on banner
ADI2C140.SYS Add support for 4 IDE drives if an alternate IDE
adapter at address 170 hex and IRQ 15 is found
ADI2C141.SYS Change sign-on banner to show measured system speed
Add ADI2 revision testing code. 4 drive support not
loaded if rev 1 ADI2 detected
ADI2C142.SYS Change reads from Command/Status register to use
Alternate Status register to avoid accidentally
clearing IRQ
ADI2C143.SYS Adjust non-turbo code to work with UMC chipset at 40
MHz
ADI2C144.SYS Add Windows startup detection code to disable driver
when Windows is running. Allows use of *WDCTRL,
fixes hanging when multiple DOS sessions are run.
ADI2A145.SYS Change a bit to code to re-enable interrupts at the
beginning of each Int 13 call to fix a problem that
showed up with someone's ATAPI IDE CD-ROM drive.
ADI2A146.SYS Change drive table for Sager. IBM H2344 and H2258
have read-ahead turned off, Add DHAA 2270 and 2540
to NOT be mode 3 and to not use read-ahead
ADI2A147.SYS Change drive table for Sager. Fix IBM drives, since
their Mode 3 is not a 180ns cycle time.....
ADI2A148.SYS Add IBM drives for Sager: DHAA-2405 and DVAA-2810.
These are 180 ns cycle time drives.
Add test for NOT supporting the Alt IDE port if it
system BIOS is already doing it, plus command line
parameters to force (alt_ide=on) and to disable
(alt_ide=off) alt IDE support...
Fix the `problem' that caused memmaker to hang if no
drives on the secondary IDE port.
ADI2A149.SYS Fixed a couple of dumb bugs in the above release.
The 4DD side works better now....
ejc 7/12/94 - initial document * 9/8/94 - rev 1.45 * 9/8/94 rev
1.46 * 10/13/94 rev 1.48 * 10/14/94 1.49
Revision Added Drive Model
name
Revision Added Drive Model
name
1.15 ALPS ELECTRIC Co.,LTD. 1.16 ST9235A
DR311C 1.16 TOSHIBA MK1422FCV
1.15 Conner Peripherals 40MB 1.16 TOSHIBA MK2124FC
- CP3000 1.16 TOSHIBA MK2224FC
1.15 Conner Peripherals 60MB 1.16 TOSHIBA MK234FC
- CP30064H 1.16 WDC AC1170F
1.15 Conner Peripherals 84MB 1.17 Conner Peripherals
- CP3184 200MB - CP3204F
1.15 Conner Peripherals 1.17 H3133-A2
100MB - CP3104 1.17 MAXTOR LXT-340A
1.15 Conner Peripherals 1.17 MAXTOR MXT-540
120MB - CP30104H 1.17 WDC AC2420
1.15 Conner Peripherals 1.20 Maxtor 7131 AT
174MB - CP30174 1.20 ST3144AT
1.15 Conner Peripherals 1.20 ST3655A
210MB - CP30204 1.20 TOSHIBA MK1522FC
1.15 Conner Peripherals 1.20 TOSHIBA MK2024FC
240MB - CP30254 1.20 TOSHIBA MK2326FC
1.15 Conner Peripherals 1.20 WDC AC140
340MB - CP30340 1.20 WDC AC280
1.15 Conner Peripherals 1.20 WDC AC160
544MB - CP3544 1.20 WDC AH260
1.15 Conner Peripherals 1.20 WDC AH280
545MB - CP30544 1.20 WDC AL2120
1.15 M262XT-0Ah 1.20 WDC AL2170
1.15 HP C2235A 1.20 WDC AL1100
1.15 MAXTOR LXT-213A 1.20 WDC AL2200
1.15 Maxtor 7120 AT 1.20 WDC CU140
1.15 Maxtor 7170 AT 1.20 WDC AC1170
1.15 Maxtor 7213 AT 1.20 WDC AC1210
1.15 Maxtor 7245 AT 1.20 WDC AC1270
1.15 Maxtor 7345 AT 1.20 WDC AC2170
1.15 QUANTUM LP52A 1.20 WDC AC2540
1.15 QUANTUM LP110A 1.22 H3256-A3
1.15 QUANTUM LP240A 1.22 H3342-A2
1.15 QUANTUM GO120 1.22 ST3600A
1.15 ST351A 1.22 ST9144A
1.15 ST1480A 1.23 ST3145A
1.15 st3144AT 1.24 H3171-A2
1.15 ST3283A 1.24 WDA-L80
1.15 ST3290A 1.28 AREAL A85
1.15 ST3385A 1.28 AREAL A130
1.15 ST3390A 1.28 AREAL A170
1.15 ST3550A 1.28 Areal A260
1.15 WDC AC2120M 1.28 Conner Peripherals
1.15 WDC AC2200 210MB - CFS210A
1.15 WDC AC2250 1.28 Conner Peripherals
1.15 WDC AC2340 340MB - CFA340A
1.15 WDC AP4200 1.28 Conner Peripherals
1.16 QUANTUM LP105A 420MB - CFS420A
1.16 Samsung Electronics 1.28 IBM-H2172-A2
120MB SHD-3062A 1.28 IBM-H2258-A3
1.16 ST3195A 1.28 IBM-H2344-A4
1.16 ST3243A 1.28 H3342-A4
1.16 ST9100A 1.29 Conner Peripherals
1.16 ST9145A 340MB - CP30344
1.16 ST9190AG 1.30 Conner Peripherals
170MB
1.46 IBM DHAA-2270 (mode 3
disable)
1.46 IBM DHAA-2540 (mode 3
disable)
1.47 Fix above two IBM
drives (>180 ns cycle
times)
1.48 IBM DHAA-2405 (mode 3
w/o read-ahead) 180m ns
cycle
1.48 IBM DVAA-2801 (mode 3
w/o read-ahead) 180 ns
cycle