home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
OS/2 Shareware BBS: 4 Drivers
/
04-Drivers.zip
/
a120-os2.zip
/
a120-os2.exe
/
AUDHELP.HLP
(
.txt
)
< prev
next >
Wrap
OS/2 Help File
|
1997-11-24
|
3KB
|
63 lines
ΓòÉΓòÉΓòÉ 1. Help for Selecting Number of Adapters ΓòÉΓòÉΓòÉ
Use this window to select the number of Avance Logic, Inc. Sound Card Adapters
that you have installed in your system. The maximum number of Avance Logic,
Inc. Sound card Adapters supported by MMPM/2 is one.
If you select zero, then you will de-install all Avance Logic, Inc. Sound card
Adapters that have been previously installed by MMPM/2.
ΓòÉΓòÉΓòÉ 2. Help for selecting Avance Logic, Inc. Sound card values ΓòÉΓòÉΓòÉ
On this screen, you specify the values that you want to use with your Avance
Logic, Inc. Sound card Adapter. The values are described below.
If you choose Close from the system menu, the selected values are set back to
the default values.
Select Ok to save the selected values and continue.
DMA Channel
This field allows you to select the DMA channel for the Avance Logic, Inc.
Sound card you have installed in your system. Use the drop down box to set the
correct DMA channel for this card.
The valid DMA Channels for Avance Logic, Inc. Sound card are:
0, 1, and 3
If the device driver fails to initialize (during system reboot following
install), it might be necessary to change the DMA channel. To change the DMA
channel setting:
Perform a selective installation and select the new DMA channel,
or
Edit the CONFIG.SYS, specify the new DMA channel (It is the value
specified by 'D' in "DEVICE=ALSNDB.SYS ..." statement), and reboot.
Interrupt Level
This field allows you to select the interrupt level for the Avance Logic, Inc.
Sound card you have installed in your system. Use the drop down box to set the
correct interrupt level for this card.
The valid interrupt levels are:
5, 7, 9, 10, and 11
If the device driver fails to initialize (during system reboot following
install), it might be necessary to change the interrupt level. To change the
interrupt level setting:
Perform a selective installation and select the new interrupt level,
or
Edit the CONFIG.SYS, specify the new interrupt level (It is the value
preceeded by 'I' in "DEVICE=ALSNDB.SYS ..." statement), and reboot.