OS/2 Shareware BBS: 3 Comm/03-Comm.zip/custom.zip/VTTERM.HLP

OS/2 Help File | 1991-07-10 | 21KB | 781 lines

ΓòÉΓòÉΓòÉ 1. Help for Video Definitions ΓòÉΓòÉΓòÉ

These options let you set default values which affect the appearance and
behavior of the display.


ΓòÉΓòÉΓòÉ 2. Cursor Type ΓòÉΓòÉΓòÉ

The cursor displayed during online terminal emulation may be Underline, Partial
Block, Half Block Top, Half Block Bottom, Centerline, or Full Block.


ΓòÉΓòÉΓòÉ 3. Number of Columns ΓòÉΓòÉΓòÉ

If 80 is selected, the emulation will be initialized in 80-column mode.  If 132
is selected, the emulation will be initialized in 132-column mode.


ΓòÉΓòÉΓòÉ 4. Screen Display ΓòÉΓòÉΓòÉ

If Normal is selected, the foreground and background screen colors are
displayed normally. If Reverse is selected, the foreground and background
colors are reversed.


ΓòÉΓòÉΓòÉ 5. Auto Wrap ΓòÉΓòÉΓòÉ

Note:  This parameter also is referred to as Automatic New Line.

When enabled, this option specifies that the cursor should automatically move
to the first character position in the next line when data is entered in the
last position on the current line.  If the current line is the last line on the
screen and scrolling is enabled, the screen will scroll.

If this option is disabled, the cursor will stick at the last position of the
current line.  Additional data entered or received will overwrite the display
position until a cursor movement command, such as a carriage return, is
processed.


ΓòÉΓòÉΓòÉ 6. Page Mode ΓòÉΓòÉΓòÉ

This option sets the scrolling mode of the terminal.  When Page Mode is
enabled, scrolling is disabled and functions which normally cause scrolling
will cause a wraparound to the top row.

When Page Mode is disabled, scrolling is enabled and the cursor will continue
to scroll down one line at a time, each time the cursor is sent past the column
limit on the last line of the displayed screen area.

Note:  Page Mode is dependent on the Auto Wrap option being enabled.


ΓòÉΓòÉΓòÉ 7. CR after LF ΓòÉΓòÉΓòÉ

If this option is enabled, Softerm automatically performs a carriage return
function (cursor to first display position) in addition to a linefeed function
(cursor down one line) whenever a linefeed character (0A hex) is received.  If
this option is disabled, no additional processing is performed for linefeed
characters.


ΓòÉΓòÉΓòÉ 8. LF after CR ΓòÉΓòÉΓòÉ

If this option is enabled, Softerm automatically performs a linefeed function
(cursor down one line) in addition to a carriage return function (cursor to
first display position) whenever a carriage return character (0D hex) is
received.  If this option is disabled, no additional processing is performed
for carriage return characters.


ΓòÉΓòÉΓòÉ 9. Enable Margin Warning Bell ΓòÉΓòÉΓòÉ

If checked, the audible alarm is sounded when a character is entered at column
74. If not checked, no alarm is issued.


ΓòÉΓòÉΓòÉ 10. Help for Video Definitions ΓòÉΓòÉΓòÉ

These options let you set default values which affect the appearance and
behavior of the display.


ΓòÉΓòÉΓòÉ 11. Cursor Type ΓòÉΓòÉΓòÉ

The cursor displayed during online terminal emulation may be Underline, Partial
Block, Half Block Top, Half Block Bottom, Centerline, or Full Block.


ΓòÉΓòÉΓòÉ 12. Number of Columns ΓòÉΓòÉΓòÉ

If 80 is selected, the emulation will be initialized in 80-column mode.  If 132
is selected, the emulation will be initialized in 132-column mode.


ΓòÉΓòÉΓòÉ 13. Screen Display ΓòÉΓòÉΓòÉ

If Normal is selected, the foreground and background screen colors are
displayed normally. If Reverse is selected, the foreground and background
colors are reversed.


ΓòÉΓòÉΓòÉ 14. Cursor Displayed ΓòÉΓòÉΓòÉ

If this option is enabled, the cursor is to be visible.  If the box is not
checked, the cursor will default to being not visible.


ΓòÉΓòÉΓòÉ 15. Auto Wrap ΓòÉΓòÉΓòÉ

Note:  This parameter also is referred to as Automatic New Line.

When enabled, this option specifies that the cursor should automatically move
to the first character position in the next line when data is entered in the
last position on the current line.  If the current line is the last line on the
screen and scrolling is enabled, the screen will scroll.

If this option is disabled, the cursor will stick at the last position of the
current line.  Additional data entered or received will overwrite the display
position until a cursor movement command, such as a carriage return, is
processed.


ΓòÉΓòÉΓòÉ 16. Page Mode ΓòÉΓòÉΓòÉ

This option sets the scrolling mode of the terminal.  When Page Mode is
enabled, scrolling is disabled and functions which normally cause scrolling
will cause a wraparound to the top row.

When Page Mode is disabled, scrolling is enabled and the cursor will continue
to scroll down one line at a time, each time the cursor is sent past the column
limit on the last line of the displayed screen area.

Note:  Page Mode is dependent on the Auto Wrap option being enabled.


ΓòÉΓòÉΓòÉ 17. CR after LF ΓòÉΓòÉΓòÉ

If this option is enabled, Softerm automatically performs a carriage return
function (cursor to first display position) in addition to a linefeed function
(cursor down one line) whenever a linefeed character (0A hex) is received.  If
this option is disabled, no additional processing is performed for linefeed
characters.


ΓòÉΓòÉΓòÉ 18. LF after CR ΓòÉΓòÉΓòÉ

If this option is enabled, Softerm automatically performs a linefeed function
(cursor down one line) in addition to a carriage return function (cursor to
first display position) whenever a carriage return character (0D hex) is
received.  If this option is disabled, no additional processing is performed
for carriage return characters.


ΓòÉΓòÉΓòÉ 19. Enable Margin Bell ΓòÉΓòÉΓòÉ

If checked, an audible alarm is sounded when a character is entered at column
74.  If not checked, no alarm is issued.


ΓòÉΓòÉΓòÉ 20. Enable Warning Bell ΓòÉΓòÉΓòÉ

This option selects whether or not the terminal generates a bell tone for
operating errors, and receipt of the BEL (Ctrl G) character.  If this option is
checked, the bell tone is enabled.  If this option is not checked, the bell
tone is disabled.


ΓòÉΓòÉΓòÉ 21. Help for Operating Mode ΓòÉΓòÉΓòÉ

Set the operating mode to one of the following to determine how the terminal
responds to ANSI control sequences:

 o  ANSI/VT52
 o  VT100
 o  VT102

 The VT102 operating mode is the default setting.


ΓòÉΓòÉΓòÉ 22. Operating Mode ΓòÉΓòÉΓòÉ

If the ANSI/VT52 operating mode is selected, the VT100 emulation will be
initialized in the VT52 mode.  However, any ANSI mode control sequence which
would cause the terminal to return to its initial state, will cause the
terminal to return to the VT52 mode.

If the VT102 or VT100 operating mode is selected, the emulation will be
initialized in the ANSI mode and respond accordingly.


ΓòÉΓòÉΓòÉ 23. Help for Operating Mode ΓòÉΓòÉΓòÉ

Set the operating mode to one of the following to determine how the terminal
responds to ANSI control sequences:

 o  ANSI/VT52
 o  VT100
 o  VT102
 o  VT200, 7-bit Controls
 o  VT200, 8-Bit Controls

 VT200, 7-bit Controls is the default setting.

 In general, use VT200, 8-Bit Controls if you need to use the COMPOSE key.


ΓòÉΓòÉΓòÉ 24. Operating Mode ΓòÉΓòÉΓòÉ

If the ANSI/VT52 operating mode is selected, the VT220 emulation will be
initialized in the VT52 mode.  However, any ANSI mode control sequence which
would cause the terminal to return to its initial state, will cause the
terminal to return to the VT52 mode.

If the VT102 or VT100 operating mode is selected, the emulation will be
initialized in the ANSI mode and respond accordingly.

VT200, 7-bit Controls is the default setting.  The emulation uses only the
multi-byte control codes (Escape sequences) which are 7-bit characters.

The VT200, 8-Bit Controls operating mode setting uses both the multi-byte
control codes (Escape sequences) and the single-byte codes (C0 and C1 control
characters).  Use this setting if you need to use the COMPOSE key.


ΓòÉΓòÉΓòÉ 25. Help for Operating Mode ΓòÉΓòÉΓòÉ

Set the operating mode to one of the following to determine how the terminal
responds to ANSI control sequences:

 o  ANSI/VT52
 o  VT100
 o  VT102
 o  VT300, 7-bit Controls
 o  VT300, 8-Bit Controls

 VT300, 7-bit Controls is the default setting.  In general, use VT300, 8-Bit
 Controls if you need to use the COMPOSE key.


ΓòÉΓòÉΓòÉ 26. Operating Mode ΓòÉΓòÉΓòÉ

If the ANSI/VT52 operating mode is selected, the VT320 emulation will be
initialized in the VT52 mode.  However, any ANSI mode control sequence which
would cause the terminal to return to its initial state, will cause the
terminal to return to the VT52 mode.

If the VT102 or VT100 operating mode is selected, the DEC VT320 emulation will
be initialized in the ANSI mode and respond accordingly.

The VT300, 7-bit Controls operating mode is the default setting.  The emulation
uses only the multi-byte control codes (Escape sequences) which are 7-bit
characters.

If the VT300, 8-Bit Controls operating mode is selected, the emulation uses
both the multi-byte control codes (Escape sequences) and the single-byte codes
(C0 and C1 control characters).  Use this setting if you need to use the
COMPOSE key.


ΓòÉΓòÉΓòÉ 27. Help for Printer Definitions ΓòÉΓòÉΓòÉ

The Printer definitions provide the default settings for terminal functions
whose destination is a print device.


ΓòÉΓòÉΓòÉ 28. Print Extent ΓòÉΓòÉΓòÉ

The Print Extent option determines what portion of the screen is printed when
the Shift PrtSc keyboard function is executed or a print screen command is
received.  If this option is specified as Full Screen, the full screen will be
printed.  If this option is specified as Scrolling Region, only the area
defined in the current scrolling region will be printed.


ΓòÉΓòÉΓòÉ 29. Print Terminator ΓòÉΓòÉΓòÉ

The Print Terminator option specifies if a form feed character is generated
after the screen is printed using the keyboard function or when a print screen
command is received.  If this option is specified as Form Feed, a form feed
character (0C hex) is appended to the data sent to the printer by the print
screen function.  If this option is specified as None, no form feed is
included.


ΓòÉΓòÉΓòÉ 30. New Line On Close Capture ΓòÉΓòÉΓòÉ

Function:  Enable or disable the automatic newline sequence (carriage return +
line feed) when sending data to a printer.  Most users will prefer to leave
this box unchecked.

This option works with all data Capture to Printer operations. Softerm normally
appends a newline sequence to the end of a data capture.  However, when
transmitting data, some hosts will initiate a capture, send a line of data,
terminate capture, and repeat the process until all data has been transmitted.
Appending the newline sequence each time would destroy the data's format.
Leave this option unchecked to stop the automatic newline sequence from being
appended and to maintain the data's format.


ΓòÉΓòÉΓòÉ 31. Append Disk Printer File On Close ΓòÉΓòÉΓòÉ

Function:  This option is provided primarily to handle hosts which initiate
printing of small amounts of data on a frequent basis.  Most users will prefer
to leave this option checked.

Important:  The action of this function depends on the selected Print Path and
whether or not a print device is busy.

Case 1:  The Print Path uses a valid printer.

If the printer is available, all print activities (such as a capture to print
or a host-initiated print function) will be sent to the printer.

If Append Disk Printer File on Close is disabled and the printer is not
available (either off line, busy, etc.), all print activities (such as a
capture to print or a host-initiated print function) will be sent to a
temporary disk file.  Each time the print activity is turned off, the temporary
file will be closed.

If Append Disk Printer File on Close is enabled and the printer is not
available (either off line, busy, etc.), all print activities (such as a
capture to print or a host-initiated print job) will be sent to a temporary
disk file.  Each time the print activity is turned off, the temporary file
will, in effect, remain open.  When printing is turned on again, the data will
be appended to the existing file.

The temporary file will be closed when one of the following happens:

  1. You turn capture off from the File menu;
  2. You clear the Append Disk Printer File on Close option;
  3. You exit the Session Window; or
  4. You exit Softerm.

 Case 2:  The Print Path uses a Disk printer

 If Append Disk Printer File on Close is disabled, every time the print
 activity is stopped, the disk file will be closed.  Each new print activity
 will overwrite the disk file.

 If Append Disk Printer File on Close is enabled, every time the print activity
 is stopped, the disk file will, in effect, remain open. Subsequent print
 activity initiation will append the new data to the original file.

 The disk file will be closed when one of the following happens:

  1. You turn capture off from the File menu;
  2. You clear the Append Disk Printer File on Close option;
  3. You exit the Session Window;  or
  4. You exit Softerm.

 Note:  Simply turning capture off will not close the file if Append Disk
 Printer File On Close is enabled.


ΓòÉΓòÉΓòÉ 32. Help for Status Line Definition ΓòÉΓòÉΓòÉ

Determine the default setting for whether or not an information status line
will be displayed when in the Session Window (online terminal emulation).

If a status line is to be displayed, determine the default setting for the date
and time format to be used;  and determine whether the DEC VT100 Status Line or
the standard Softerm Status Line will be displayed.


ΓòÉΓòÉΓòÉ 33. Status Line Preference ΓòÉΓòÉΓòÉ

If the VT100 Status Line is selected, the status information displayed will
include Row and Column, Operating Mode, 80 or 132 Column Mode, Replace or
Insert mode, Printer Status, Hold indicator, Keyboard Lock indicator, and LED
indicators L1, L2, L3, and L4.

The standard Softerm Status Line displays some or all of the following:

 o Online or Local mode
 o Connect status
 o Duplex setting
 o Capture status
 o Caps Lock key state
 o Numeric Lock key state
 o Date and Time or Connect Time


ΓòÉΓòÉΓòÉ 34. Status Line Time Format ΓòÉΓòÉΓòÉ

 Date/Time
      Choose this setting for the status line to display the current date and
      time.

 Connect Time
      Choose this setting for the status line to display the length of time the
      connection has been established.


ΓòÉΓòÉΓòÉ 35. Status Line Display ΓòÉΓòÉΓòÉ

 On        The status line will be displayed when you are in the Session Window
           (online terminal emulation mode).

 Off       The status line will not be displayed when you are in the Session
           Window (online terminal emulation mode).


ΓòÉΓòÉΓòÉ 36. Help for Status Line Definition ΓòÉΓòÉΓòÉ

Determine the default setting for whether or not an information status line
will be displayed when in the Session Window (online terminal emulation).

If a status line is to be displayed, determine the default setting for the date
and time format to be used;  and determine whether the DEC VT220 Status Line or
the standard Softerm Status Line will be displayed.


ΓòÉΓòÉΓòÉ 37. Status Line Preference ΓòÉΓòÉΓòÉ

If the VT220 Status Line is selected, the status information displayed will
include Row and Column, Operating Mode, 80 or 132 Column Mode, Replace or
Insert mode, Printer Status, Hold indicator, Keyboard Lock indicator, Compose
indicator when in VT220 mode, and LED indicators L1, L2, L3, and L4 when in
VT100 mode.

The standard Softerm Status Line displays some or all of the following:

 o Online or Local mode
 o Connect status
 o Duplex setting
 o Capture status
 o Caps Lock key state
 o Numeric Lock key state
 o Date and Time or Connect Time


ΓòÉΓòÉΓòÉ 38. Status Line Time Format ΓòÉΓòÉΓòÉ

 Date/Time
      Choose this setting for the status line to display the current date and
      time.

 Connect Time
      Choose this setting for the status line to display the length of time the
      connection has been established.


ΓòÉΓòÉΓòÉ 39. Status Line Display ΓòÉΓòÉΓòÉ

 On        The status line will be displayed when you are in the Session Window
           (online terminal emulation mode).

 Off       The status line will not be displayed when you are in the Session
           Window (online terminal emulation mode).


ΓòÉΓòÉΓòÉ 40. Help for Status Line Definition ΓòÉΓòÉΓòÉ

Determine the default setting for whether or not an information status line
will be displayed when in the Session Window (online terminal emulation).

If a status line is to be displayed, determine the default setting for the date
and time format to be used;  and determine whether the DEC VT320 Status Line or
the standard Softerm Status Line will be displayed.


ΓòÉΓòÉΓòÉ 41. Status Line Preference ΓòÉΓòÉΓòÉ

If the VT320 Status Line is selected, the status information displayed will
include Row and Column, Operating Mode, 80 or 132 Column Mode, Replace or
Insert mode, Printer Status, Hold indicator, Keyboard Lock indicator, Compose
indicator when in VT320 mode, and LED indicators L1, L2, L3, and L4 when in
VT100 mode.

The standard Softerm Status Line displays some or all of the following:

 o Online or Local mode
 o Connect status
 o Duplex setting
 o Capture status
 o Caps Lock key state
 o Numeric Lock key state
 o Date and Time or Connect Time


ΓòÉΓòÉΓòÉ 42. Status Line Time Format ΓòÉΓòÉΓòÉ

 Date/Time
      Choose this setting for the status line to display the current date and
      time.

 Connect Time
      Choose this setting for the status line to display the length of time the
      connection has been established.


ΓòÉΓòÉΓòÉ 43. Status Line Display ΓòÉΓòÉΓòÉ

 On        The status line will be displayed when you are in the Session Window
           (online terminal emulation mode).

 Off       The status line will not be displayed when you are in the Session
           Window (online terminal emulation mode).


ΓòÉΓòÉΓòÉ 44. Help for Keypad Mode ΓòÉΓòÉΓòÉ

The option Keypad Mode allows the default operating mode of the numeric keypad
to be selected.


ΓòÉΓòÉΓòÉ 45. Keypad Mode ΓòÉΓòÉΓòÉ

If set to Numeric and the Numeric Lock key is On, the keypad will generate
numbers.  If the Numeric Lock key is Off, the keypad will generate Local Edit
Functions.

If set to Application and the Numeric Lock key is On, the special keypad
applications mode is enabled and generates special code sequences.  If the
Numeric Lock key is Off, the keypad will generate Local Edit Functions unless
used with the Alt key, in which case an Application Mode sequence will be
generated.

Note:  The host may override the setting of this option.


ΓòÉΓòÉΓòÉ 46. Help for Keypad Modes ΓòÉΓòÉΓòÉ

The Keypad Modes options allow the default operating mode of the numeric keypad
and the cursor keys to be selected.


ΓòÉΓòÉΓòÉ 47. Keypad Mode ΓòÉΓòÉΓòÉ

If set to Numeric and the Numeric Lock key is On, the keypad will generate
numbers.  If the Numeric Lock key is Off, the keypad will generate Local Edit
Functions.

If set to Application and the Numeric Lock key is On, the special keypad
applications mode is enabled and generates special code sequences.  If the
Numeric Lock key is Off, the keypad will generate Local Edit Functions.

Note 1:  When used with the Alt key, keypad keys always generate an Application
Mode sequence.

Note 2:  The host may override the setting of this option.


ΓòÉΓòÉΓòÉ 48. Cursor Keys Mode ΓòÉΓòÉΓòÉ

This option determines what codes are transmitted by the cursor keys. If set to
ANSI, standard ANSI cursor control sequences are transmitted. If set to
Application, special alternate sequences are transmitted.


ΓòÉΓòÉΓòÉ 49. Help for Break Enabled Mode ΓòÉΓòÉΓòÉ

This option determines if the BREAK function is enabled.  If this option is set
to No, the BREAK function is disabled.


ΓòÉΓòÉΓòÉ 50. Break Enabled ΓòÉΓòÉΓòÉ

If this option is set to No, the BREAK function is disabled.


ΓòÉΓòÉΓòÉ 51. Help for Answerback Message ΓòÉΓòÉΓòÉ

If an Answerback string is defined, it can be transmitted automatically when
requested, and it can be transmitted manually by a keyboard function.


ΓòÉΓòÉΓòÉ 52. Auto-answerback On Connect ΓòÉΓòÉΓòÉ

If set to Yes, the answerback string will be transmitted automatically whenever
a new connection is made.

If set to No,it is not transmitted.


ΓòÉΓòÉΓòÉ 53. Answerback Message ΓòÉΓòÉΓòÉ

Displayable and non-displayable ASCII character codes may be included in an
answerback string.

To enter non-displayable ASCII character codes, such as [CR] for Carriage
Return, use the acronym listed in the ASCII column in ASCII Character Codes

The answerback string can contain up to 30 actual characters.


ΓòÉΓòÉΓòÉ 54. Help for User Preference Settings ΓòÉΓòÉΓòÉ

User Preference Settings let you set whether or not the host system can change
User Key and User Features settings.


ΓòÉΓòÉΓòÉ 55. User Keys ΓòÉΓòÉΓòÉ

If this option is set to Unlocked, the user key definitions can be altered from
the host.

If this option is set to Locked, user key definitions cannot be altered.


ΓòÉΓòÉΓòÉ 56. User Features ΓòÉΓòÉΓòÉ

These include light/dark screen, tab stops, and keyboard lock.

If this option is set to Unlocked, the host can change the user preference
features.

If this option is set to Locked, the host cannot alter user preference
features.


ΓòÉΓòÉΓòÉ 57. Help for Keyboard Dialect ΓòÉΓòÉΓòÉ

The emulation option Keyboard Dialect is used to respond to a request from the
host.  In general, you should set this option to match the layout of your
keyboard.  The options available are:  North American, British, Flemish,
Canadian (French), Danish, Finnish, German, Dutch, Italian, Swiss (French),
Swiss (German), Swedish, Norwegian, French/Belgian, Spanish and Portuguese.


ΓòÉΓòÉΓòÉ 58. Keyboard Dialect ΓòÉΓòÉΓòÉ

From the drop-down list box, select one of the available dialects and choose
OK.

Note:  Appropriate dialects are keyboard dependent.


ΓòÉΓòÉΓòÉ 59. Help for Tab Stop Settings ΓòÉΓòÉΓòÉ

Default tab stops are set every 8 columns.  To change tab stop settings, use
the cursor keys to select the approprite tab position and press Space to toggle
the setting, or click on the appropriate tab position to toggle the setting.


ΓòÉΓòÉΓòÉ 60. ASCII Character Codes ΓòÉΓòÉΓòÉ

These characters, codes and functions can be inserted in many of Softerm's
string entry fields.  The first 32 codes (0 through 31 decimal), also called
the non-displayable characters, often are used as control codes. They can be
entered in a text field by typing the code's acronym (listed in the ASCII
column) between square brackets.

For example, a Carriage Return can be included in a string by typing the
acronym and placing it between square brackets, such as:

     [CR]

Hex  Dec   ASCII     Name               Keyboard

00   0     [NUL]     null               Ctrl @
01   1     [SOH]     start heading      Ctrl A
02   2     [STX]     start text         Ctrl B
03   3     [ETX]     end text           Ctrl C
04   4     [EOT]     end transmission   Ctrl D
05   5     [ENQ]     enquire            Ctrl E
06   6     [ACK]     acknowledge        Ctrl F
07   7     [BEL]     bell               Ctrl G
08   8     [BS]      backspace          Ctrl H
09   9     [HT]      horizontal tab     Ctrl I
0A   10    [LF]      line feed          Ctrl J
0B   11    [VT]      vertical tab       Ctrl K
0C   12    [FF]      form feed          Ctrl L
0D   13    [CR]      carriage return    Ctrl M
0E   14    [SO]      shift out          Ctrl N
0F   15    [SI]      shift in           Ctrl O
10   16    [DLE]     data link escape   Ctrl P
11   17    [DC1]     device control 1   Ctrl Q
12   18    [DC2]     device control 2   Ctrl R
13   19    [DC3]     device control 3   Ctrl S
14   20    [DC4]     device control 4   Ctrl T
15   21    [NAK]     negative ack       Ctrl U
16   22    [SYN]     synchronous idle   Ctrl V
17   23    [ETB]     end trans block    Ctrl W
18   24    [CAN]     cancel             Ctrl X
19   25    [EM]      end medium         Ctrl Y
1A   26    [SUB]     substitute         Ctrl Z
1B   27    [ESC]     escape             Esc
1C   28    [FS]      file separator     Ctrl \
1D   29    [GS]      group separator    Ctrl ]
1E   30    [RS]      record separator   Ctrl ^
1F   31    [US]      unit separator     Ctrl _
20   32              space              Space Bar
21   33      !       exclamation        !
22   34      "       quotation          "
23   35      #       number sign        #
24   36      $       dollar sign        $
25   37      %       percent sign       %
26   38      &       ampersand          &
27   39      '       apostrophe         '
28   40      (       open parenthesis   (
29   41      )       close parenthesis  )
2A   42      *       asterisk           *
2B   43      +       plus sign          +
2C   44      ,       comma              ,
2D   45      -       minus              -
2E   46      .       period             .
2F   47      /       slash              /
30   48      0       zero               0
31   49      1       one                1
32   50      2       two                2
33   51      3       three              3
34   52      4       four               4
35   53      5       five               5
36   54      6       six                6
37   55      7       seven              7
38   56      8       eight              8
39   57      9       nine               9
3A   58      :       colon              :
3B   59      ;       semicolon          ;
3C   60      <       less than          <
3D   61      =       equal to           =
3E   62      >       greater than       >
3F   63      ?       question mark      ?
40   64      @       at sign            @
41   65      A       A                  A
42   66      B       B                  B
43   67      C       C                  C
44   68      D       D                  D
45   69      E       E                  E
46   70      F       F                  F
47   71      G       G                  G
48   72      H       H                  H
49   73      I       I                  I
4A   74      J       J                  J
4B   75      K       K                  K
4C   76      L       L                  L
4D   77      M       M                  M
4E   78      N       N                  N
4F   79      O       O                  O
50   80      P       P                  P
51   81      Q       Q                  Q
52   82      R       R                  R
53   83      S       S                  S
54   84      T       T                  T
55   85      U       U                  U
56   86      V       V                  V
57   87      W       W                  W
58   88      X       X                  X
59   89      Y       Y                  Y
5A   90      Z       Z                  Z
5B   91      [       open bracket       [
5C   92      \       backslash          \
5D   93      ]       close bracket      ]
5E   94      ^       circumflex         ^
5F   95      _       underscore         _
60   96      `       grave accent       `
61   97      a       a                  a
62   98      b       b                  b
63   99      c       c                  c
64   100     d       d                  d
65   101     e       e                  e
66   102     f       f                  f
67   103     g       g                  g
68   104     h       h                  h
69   105     i       i                  i
6A   106     j       j                  j
6B   107     k       k                  k
6C   108     l       l                  l
6D   109     m       m                  m
6E   110     n       n                  n
6F   111     o       o                  o
70   112     p       p                  p
71   113     q       q                  q
72   114     r       r                  r
73   115     s       s                  s
74   116     t       t                  t
75   117     u       u                  u
76   118     v       v                  v
77   119     w       w                  w
78   120     x       x                  x
79   121     y       y                  y
7A   122     z       z                  z
7B   123     {       open brace         {
7C   124     |       line               |
7D   125     }       close brace        }
7E   126     ~       tilde              ~
7F   127     [RUB]   rubout (delete)    Shift Backspace