home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HomeWare 14
/
HOMEWARE14.bin
/
drivers
/
sbdrv.arj
/
README.TXT
< prev
next >
Wrap
Text File
|
1993-12-30
|
7KB
|
216 lines
╔══════════════════════════════════╗
║ Sound Blaster Updates Disk ║
╚══════════════════════════════════╝
This file contains the following sections:
1. Installation requirements
2. Installation Instruction
3. INSTALL's operation
4. Updated files
1. INSTALLATION REQUIREMENTS
To install Sound Blaster Updates, you require INSTALL.EXE,
INSTALL.PVL and an additional file that is card dependent.
(Refer to the table below)
╔═══════════════════════════════════════════════╤═══════════════╗
║ Audio card │ File required ║
╠═══════════════════════════════════════════════╪═══════════════╣
║ Sound Blaster 16 (Advanced Signal Processor) │ SB16UPD.PVL ║
║ Sound Blaster 16 │ SB16UPD.PVL ║
║ Sound Blaster Pro 2 │ SBPROUPD.PVL ║
║ Sound Blaster Pro │ SBPROUPD.PVL ║
║ Sound Blaster 2.0 │ SB2UPD.PVL ║
╚═══════════════════════════════════════════════╧═══════════════╝
2. INSTALLATION INSTRUCTION
To update your Sound Blaster software, follow the steps below:
a. Copy all the files required (as shown in section 1) onto a
floppy disk or a directory in your hard disk.
b. Run the program INSTALL.EXE from the floppy disk or your hard
disk.
c. Follow the program's instruction to complete the installation.
3. INSTALL's OPERATION
INSTALL will perform the following tasks:
a. Move all out-dated files that are no longer in use from your Sound
Blaster directory to the BACKUP directory.
b. Back-up all files that will be updated to the BACKUP directory.
c. Install updated programs to your Sound Blaster directory.
d. Verify and update the files WINSETUP.INF and OEMSETUP.INF if
necessary.
If you choose to update the drivers in your Windows directory, the
program will perform the following tasks:
a. Remove all out-dated drivers that are no longer in use from your
Windows directory.
b. Install updated drivers to your Windows directory.
c. Verify that the file SYSTEM.INI contains the correct name of the
Sound Blaster driver.
At the end of the installation, a log file SBUPDATE.LOG will be
created in your Sound Blaster directory. You may use a text editor
to view this file. Alternatively, follow the steps below:
a. Change to your Sound Blaster directory.
b. Type "TYPE SBUPDATE.LOG" and press <Enter>.
4. UPDATED FILES
Note - BACKUP directory refers to the directory \BACKUP in your
Sound Blaster directory which will be created by INSTALL.
For Sound Blaster 16 (Advanced Signal Processor) users
──────────────────────────────────────────────────────
The following files will be updated:
SBCONFIG.EXE WINSETUP.EXE WFM0006.ACV WFM0007.ACV
WFM0200.ACV CTVDSK.DRV CTWDSK.DRV CSP.SYS
MMPLAY.EXE SBSIM.COM VOICE.EXE VPLAY.EXE
VREC.EXE WPLAY.EXE WREC.EXE SOUNDOLE.EXE
VSBPD.386 CSPMAN.DLL SB16AUX.DRV SB16SND.DRV
SB16FM.DRV WI0006.CSP WI0007.CSP WI0200.CSP
WO0006.CSP WO0007.CSP WO0200.CSP WFM0001A.CSP
WFM0006A.CSP WFM0007A.CSP WFM0200A.CSP
The following files will moved to the BACKUP directory if it exists:
ASP.SYS ASPMAN.DLL ASPMAN.DLL SBP16SND.DRV
WO0200.ASP WI0200.ASP WO0006.ASP WI0006.ASP
WO0007.ASP WI0007.ASP
The following files will be verified and modified if necessary:
WINSEUP.INF OEMSETUP.INF CONFIG.SYS
If you choose to update your Windows drivers:-
The following drivers in the \WINDOWS and \WINDOWS\SYSTEM
directories will be deleted if it exists:
SBP16SND.DRV ASPMAN.DLL
The following drivers in the \WINDOWS and \WINDOWS\SYSTEM
directories will be updated:
CTRES.DLL SB16SND.DRV SB16AUX.DRV CSPMAN.DLL
VSBPD.386 SB16FM.DRV MIDIMAP.CFG WFM0006.ACV
WFM0007.ACV WFM0200.ACV
The following file will be verified and modified if necessary:
SYSTEM.INI
For Sound Blaster 16 users
──────────────────────────
The following files will be updated:
SBCONFIG.EXE WINSETUP.EXE WFM0006.ACV WFM0007.ACV
WFM0200.ACV CTVDSK.DRV CTWDSK.DRV MMPLAY.EXE
SBSIM.COM VOICE.EXE VPLAY.EXE VREC.EXE
WPLAY.EXE WREC.EXE SOUNDOLE.EXE VSBPD.386
CSPMAN.DLL SB16AUX.DRV SB16SND.DRV SB16FM.DRV
The following files will moved to the BACKUP directory if it exists:
WINSETUP.INF ASPMAN.DLL ASPMAN.DLL SBP16SND.DRV
WVFM0006.ACV WVFM0007.ACV WVFM0200.ACV
The following files will be verified and modified if necessary:
WINSEUP.INF OEMSETUP.INF
If you choose to update your Windows drivers:-
The following drivers in the \WINDOWS and \WINDOWS\SYSTEM
directories will be deleted if it exists:
SBP16SND.DRV ASPMAN.DLL
The following drivers in your Windows and Windows \SYSTEM directory
will be updated:
CTRES.DLL SB16SND.DRV SB16AUX.DRV CSPMAN.DLL
VSBPD.386 SB16FM.DRV MIDIMAP.CFG WFM0006.ACV
WFM0007.ACV WFM0200.ACV
The following file will be verified and modified if necessary:
SYSTEM.INI
For Sound Blaster Pro 2 users
─────────────────────────────
The following files will be updated:
SBPMIXER.EXE SBPSND.DRV SBPAUX.DRV VSBPD.386
SBP2FM.DRV MIDIMAP.CFG
If you choose to update your Windows drivers:-
The following drivers in the \WINDOWS and \WINDOWS\SYSTEM
directories will be updated:
SBPSND.DRV SBPAUX.DRV VSBPD.386 SBP2FM.DRV
MIDIMAP.CFG
For Sound Blaster Pro users
───────────────────────────
The following files will be updated:
SBPMIXER.EXE SBPSND.DRV SBPAUX.DRV VSBPD.386
If you choose to update your Windows drivers:-
The following drivers in the \WINDOWS and \WINDOWS\SYSTEM
directories will be updated:
sbpsnd.drv sbpaux.drv vsbpd.386
For Sound Blaster 2.0 users
───────────────────────────
The following file will be updated:
SB20SND.DRV
If you choose to update your Windows drivers:-
The following driver in the \WINDOWS\SYSTEM directory will be
updated:
SB20SND.DRV
******* End of README *******