home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
HomeWare 14
/
HOMEWARE14.bin
/
drivers
/
4spswin.arj
/
README
< prev
next >
Wrap
Text File
|
1993-04-02
|
10KB
|
231 lines
*******************************************************
**
Microsoft's
PostScript Printer Driver for MS Windows 3.1
(Version 3.53)
***
Distributed by Hewlett-Packard Company
for use with the
HP LaserJet 4Si/4Si MX Printer
***
README file
March 19, 1993
*******************************************************
*******************************************************
(c) Copyright 1991, 1992 Hewlett-Packard Company.
(c) Copyright 1991, 1992 Microsoft Corporation.
PostScript (TM) is a trademark of Adobe Systems
Incorporated which may be registered in certain
jurisdictions.
Microsoft (R) and Windows (R) are registered trademarks
of Microsoft Corp.
INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE
THAT MAY ACCOMPANY THIS DOCUMENT (collectively referred
to as Microsoft's PostScript Printer Driver for MS
Windows 3.1 - Version 3.53) IS PROVIDED "AS IS" WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED,
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR
PURPOSE.
*******************************************************
We suggest printing this document so you can read the
instructions while performing the steps on your
computer screen. Note that for the HP LaserJet 4Si/4Si
MX PostScript printer, making these driver changes
does not affect the printer's resolution (300 dpi or
600 dpi) setting. The printer's resolution must be set
at the printer's front panel. For example, if your
printer's resolution setting is 600 dpi and your
software's resolution setting is 300 dpi, your
document will print at 600 dpi. The printer's
resolution setting will always override your
software's resolution setting.
----------------INSTALLATION FOR THE HP LASERJET
4Si/4Si MX 600 DPI Printer Driver ---------------------
-------------------------------------------------------
Following are instructions for installing the driver in
Windows 3.1. It is installed through the Control Panel.
This driver is an updated version of the PostScript
driver that ships with Windows 3.1, which adds support
for the HP LaserJet 4Si/4Si MX PostScript printer.
1. Insert the HP LaserJet 4Si/4Si MX PostScript
Printer Drivers for Microsoft Windows disk into a
flexible disk drive.
2. Double-click the "Control Panel" icon in the Main
window in the Program Manager window.
3. Double-click the "Printers" icon in the Control
Panel window.
4. Click the "Add" button. The dialog box expands to
display a list of printers available in Windows 3.1.
If you have never installed a printer, this list box
will fold out automatically for you.
5. Click "Install Unlisted or Updated Printer" at the
top of the "List of Printers".
6. Click the "Install" button.
7. If your driver disk is in flexible disk drive A:,
type the following, then click the "OK" button:
a:\
If your driver disk is in a different flexible disk
drive, substitute the appropriate drive letter.
8. Click the "HP LaserJet 4Si/4Si MX PS 600 dpi"
selection. Click the "OK" button.
9. Click the "Connect" button.
10. Click the desired port in the "Ports" list box.
11. Change the "Transmission Retry" to "600" to ensure
that timeouts do not occur.
12. Click the "OK" button.
13. Click the "Setup" button.
14. Click the "Options" button.
15. Click the "Advanced" button.
16. Clear the "Compress Bitmaps" check box by clicking
it. (Clearing this check box will cause your print
files not to be compressed. This should significantly
decrease the time needed to print files with bitmapped
graphics.)
17. Click the "OK" button to exit Advanced Options.
18. Click the "OK" button to exit Options.
19. Make any other desired changes to the driver
options.
20. Click the "OK" button to exit the "HP LaserJet..."
dialog box.
21. Click the "Set as Default Printer" button if you
wish to make this printer the default printer.
22. Click the "Close" button.
23. Double-click the upper left-hand corner of the
Control Panel window to close it.
24. Remove the driver disk from your flexible disk
drive.
-------------------------------------------------------
----------------INSTALLATION FOR THE HP LASERJET
4Si/4Si MX 300 DPI Printer Driver ---------------------
-------------------------------------------------------
Following are instructions for installing the driver in
Windows 3.1. It is installed through the Control Panel.
This driver is an updated version of the PostScript
driver that ships with Windows 3.1, which adds support
for the HP LaserJet 4Si/4Si MX PostScript printer.
1. Insert the HP LaserJet 4Si/4Si MX PostScript
Printer Drivers for Microsoft Windows
disk into a flexible disk drive.
2. Double-click the "Control Panel" icon in the Main
window in the Program Manager window.
3. Double-click the "Printers" icon in the Control
Panel window.
4. Click the "Add" button. The dialog box expands to
display a list of printers available in Windows 3.1.
If you have never installed a printer, this list box
will fold out automatically for you.
5. Click "Install Unlisted or Updated Printer" at the
top of the "List of Printers".
6. Click the "Install" button.
7. If your driver disk is in flexible disk drive A:,
type the following, then click the "OK" button:
a:\
If your driver disk is in a different flexible disk
drive, substitute the appropriate drive letter.
8. Click the "HP LaserJet 4Si/4Si MX PS 300 dpi"
selection. Click the "OK" button.
9. Click the "Connect" button.
10. Click the desired port in the "Ports" list box.
11. Change the "Transmission Retry" to "600" to ensure
that timeouts do not occur.
12. Click the "OK" button.
13. Click the "Setup" button.
14. Click the "Options" button.
15. Click the "Advanced" button.
16. Clear the "Compress Bitmaps" check box by clicking
it. (Clearing this check box will cause your print
files not to be compressed. This should significantly
decrease the time needed to print files with bitmapped
graphics.)
17. Click the "OK" button to exit Advanced Options.
18. Click the "OK" button to exit Options.
19. Make any other desired changes to the driver
options.
20. Click the "OK" button to exit the "HP LaserJet..."
dialog box.
21. Click the "Set as Default Printer" button if you
wish to make this printer the default printer.
22. Click the "Close" button.
23. Double-click the upper left-hand corner of the
Control Panel window to close it.
24. Remove the driver disk from your flexible disk
drive.
-------------------------------------------------------
----------------DRIVER DESCRIPTION --------------------
-------------------------------------------------------
This is Version 3.53 of Microsoft's PostScript Printer
Driver for MS Windows 3.1. It is an updated version of
the PostScript driver that ships with Windows 3.1,
which adds support for the HP LaserJet 4Si/4Si MX
PostScript printer. It offers the following selection
of HP LaserJet PostScript printer models, and support
for the following printer features unique to HP
LaserJet printers:
* HP LaserJet printer models:
--HP LaserJet 4Si/4Si MX PostScript Printer (300
dpi)
--HP LaserJet 4Si/4Si MX PostScript Printer (600
dpi)
* HP LaserJet printer features:
--Duplexing
--PJL language switching (HP LaserJet 4Si/4Si MX
printer)
-------------------------------------------------------
-----DRIVER OPTIONS FOR HPLASERJET PRINTERS------------
-------------------------------------------------------
The driver's on-line Help facility describes driver
options that are common to all printers. This section
describes driver options that are unique to HP LaserJet
printers, or which warrant additional explanation.
HP LASERJET 4Si/4Si MX PAPER SOURCES: The driver's
Paper Source selections for the HP LaserJet 4Si/4Si MX
PostScript printer correspond to the printer's paper
sources as follows:
DRIVER: PRINTER:
Upper Tray .......... Upper Paper Cassette
Lower Tray .......... Lower Paper Cassette
Manual Feed ......... Manually fed from the
Multipurpose Tray
Envelope Feed ....... Optional Envelope Feeder
Auto Select ......... Printer's default tray for the
selected paper size
Large Capacity ...... Optional Lower Cassette
DUPLEX PRINTING - NONE, LONG EDGE OR SHORT EDGE: This
option allows you to enable duplex (two-sided) printing
on HP LaserJet 4Si and 4Si MX printers. Selecting None
causes the document to be printed one-sided. Selecting
Long Edge causes the document to be printed two-sided,
ready to be bound along the length (longer dimension)
of the pages. Selecting Short Edge causes the document
to be printed two-sided, ready to be bound along the
width (shorter dimension) of the pages.
-------------------------------------------------------
DISK CONTENTS--WIN31DRV (Windows 3.1 driver directory)
-------------------------------------------------------
* README This file
* PSCRIPT .DRV PostScript driver file
* PSCRIPT .HLP On-line Windows help file
* OEMSETUP.INF File used for installation
* HP4SI6_1.WPD File used by the driver to add HP
LaserJet 4Si/4Si MX printer support for 600 dots per
inch
* HP4SI3_1.WPD File used by the driver to add HP
LaserJet 4Si/4Si MX printer support for 300 dots per
inch
-------------------------------------------------------
----------------CALLING FOR HELP ----------------------
-------------------------------------------------------
For assistance installing or using your driver, call
the Hewlett-Packard Personal Peripherals Assist
Line weekdays between 7:00 a.m. and 6:00 p.m. (Mountain
Standard
Time), except for Wednesday when the hours are
7 a.m. to 4 p.m. The phone number is (208) 323-2551.
********************************************************