home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Archive Magazine 1997
/
ARCHIVE_97.iso
/
text
/
hints
/
vol_08
/
issue_08
< prev
next >
Wrap
Text File
|
1995-04-06
|
4KB
|
92 lines
Hints and Tips
8.8
CC Turbo Driver v4 Ö Iæd like to pass on to other Archive readers some
answers that I received from CC.
8.8
1) The command *Printer$BlackScale is no longer supported by the v4
TurboDrivers; instead, CC offer ösophisticated colour correction
tablesò; those for HP printers are öshortlyò to be released.
8.8
2) The Turbo module which could be used in earlier versions of the TD to
enable other printer drivers to use the dongled cable has been replaced
by the program !PrintQFS, which is cunningly hidden within
!System.!CCShared.
8.8
By the way, CC informed me that Style has reached version 3.07. Free
upgrades from v. 3.04 can be obtained in the usual way Ö by sending in
master disk 1. (Donæt forget to send the return postage!)
8.8
Jochen Konietzko, K÷ln, Germanyáu
8.8
Fireworkz Pro Ö I reported some problems with version 1.20 to Colton
Software and was told (in a letter dated 15th March) that the latest
version, 1.20/50, fixes most of these problems. Version 1.21 öis due out
in about three weeksò. (Colton are currently saying, öit will be
available during Aprilò. Ed) The upgrade procedure here is to send in
both program disks Ö donæt forget Ö return postage!
8.8
Jochen Konietzko, K÷ln, Germanyáu
8.8
Printing from text editors Ö Iámentioned, in my review of lottery
packages, that one of them would not print on my LaserDirect, because it
Éprintsæ to a null file instead of to the printer. I have now stopped
trying to use Zap for the same reason. If I drag a text file to the
printer icon (with Zap installed instead of Edit), it prints properly
but if I try to print the document currently displayed on the screen, it
does not. I donæt know whether this is a general problem or whether I
have overlooked some control parameter.
8.8
Colin Singleton, Sheffieldáu
8.8
Many text editors, including both Edit and Zap, cheat when you try to
print and send the data directly to the parallel port. This is fine if
you have a standard printer, but if you use a different connection (e.g.
serial or laser direct), the file will not be printed. Also, if you use
a Turbo Driver, it is circumvented by Edit, so the text is corrupted.
There are a couple of ways around this.
8.8
You can save to a file and drag that to the printer icon, or try
dragging the file from the save box to the print icon. This should have
the same result and it means that you donæt have to delete the file
afterwards. With Zap, you can also press <shift-print> rather than
<print> which will force the printout to go via the printer driver.
Since Zap allows you to reconfigure the keyboard shortcuts, you can set
<print> to print via the printer driver. (Choose Edit keys from the
options submenu, find the print keymapping which, by default, will be
set to Quickprint and change it to Printfile. Save the keys file and
choose Reload keys again, from the options submenu for the change to
take effect).
8.8
Matthew Hunter, NCSáu
8.8
Wolfenstein bugs Ö A few days after I had sent my Wolfenstein hint
(Archive 8.7, p.12) to Paul, I found that sometimes the saved files
remained open even though the !Cfs.!Run file was not. I turned to
PowerSlave for help and this is what Eddie Edwards told me:
8.8
There is a bug in Wolfensteinæs code which means that the files are only
closed when the current directory is on the same filing system as
Wolfenstein. Since I use ADFS and SCSI, this would often not be the
case.
8.8
The recommended remedy is to add, at the start of the !Run file, a
Dir<Obey$Dir> command.
8.8
This fix seems to work perfectly.
8.8
Another problem I have is that Wolfenstein always kills my computeræs
beep. This bug can be fixed by adding:
8.8
Channelvoice 1 MyVoice
8.8
to the end of the !Run file.
8.8
Jochen Konietzko, K÷ln, Germanyáu
From COmment COlumn
Turbo Drivers (not a) problem Ö The problem of Printers 1.28 with the
current versions of the Turbo Drivers has, apparently, now been fixed,
so please do not remove line 91 (as we stated in Archive 8.7 p13) of the
!RunImage file! If you still have a problem, contact Computer Concepts.
8.8
CC Technical Supportáu