home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
back2roots/padua
/
padua.7z
/
padua
/
system
/
JM1.1b.lzh
/
jm
/
.jmrc
next >
Wrap
Text File
|
1992-04-03
|
6KB
|
132 lines
#==========================================================================
# JM Job Manager - Copyright 1992, Steve Koren
#
# (JM is freely distributable under conditions given in the documentation.
# It is not wise to try to understand JM by browsing this file. The
# documentation is there for a reason).
#
# This file is read by JM upon invocation. It should be named ".jmrc",
# and may reside in either the current directory or "S:" (preferred).
# Also, make sure JM-Handler resides in "L:".
#
# Do not delete these comment lines - they are read fast. Arguments
# to options can be quoted to contain spaces. Use spaces, but no tabs.
# Inter-field spacing is ignored. '#' in the first column of a line is
# a comment line. If a non-repeating option is repeated, later definitions
# will override previous ones.
#==========================================================================
# This option controls whether JM will keep a log of task activity.
# Permitted values are "off" and "on".
LOGSWITCH off
#--------------------------------------------------------------------------
# This is the name of the log file, when used. The log file should be on
# fast device, not a floppy. Permitted values are valid file names.
LOGFILE "ram:JM.log"
#--------------------------------------------------------------------------
# This is the time in seconds between updates of the task CPU percentage
# fields. The larger this number, the longer the CPU weighted average will
# take to converge to the current value. Permitted values are 1 to 10,
# inclusive.
PS_CPU_TIME 5
#--------------------------------------------------------------------------
# This switch controls whether JM will manage unequal allocation of
# cycles to CPU bound tasks. See the "MANAGE" options below. Permitted
# values are "on" or "off".
MANAGESWITCH off
#--------------------------------------------------------------------------
# This switch controls whether JM will watch new tasks and modify their
# priority according to the "TASKPRI" defaults given in this file.
# Permitted values are "on" or "off".
WATCHSWITCH on
#--------------------------------------------------------------------------
# This option controls the length of one quantum when JM is managing
# unequal allocation of cycles to CPU bound tasks. This number is the
# number of 10ths of a second in one quantum. Small values produce
# smoother results, but have a (slightly) higher overhead. Permitted
# values are 1 (one 10th of a second) to 50 (5 seconds). Faster machines
# can use smaller values with less overhead.
QUANTUM 5
#--------------------------------------------------------------------------
# These two parameters control the priority of "active" and "inactive"
# managed tasks. JM will allocate CPU resources unequally by changing
# task priorities over time. These are the two priorities it uses.
# The MIN value must be less than MAX. Permitted values are -128 to -1.
MIN_MANAGE_PRI -26
MAX_MANAGE_pri -25
#--------------------------------------------------------------------------
# JM can watch tasks which start up, and change their priorities to a
# default based on the task name. Up to 64 watched task names may be
# present. Case is not significant, and pathnames are ignored. The
# second field is the task name, and the third is the priority to give
# the task upon startup. The minimum allowable priority is -128, and
# the maximum is 127. Values greater than 5 should be used with caution.
TASKPRI "mg" 2
TASKPRI "MEmacs" 2
TASKPRI "calendar" 5
TASKPRI "calculator" 1
#--------------------------------------------------------------------------
# JM can manage unequal allocation of CPU resources to CPU bound tasks,
# something not before possible on the Amiga. These lines control this
# behavior. The second field is the task name. The third is the number
# of quantum (see QUANTUM above) which will go to this task before control
# is given to another task. For example, if "task_1" is set to 3, and
# "task_2" is set to "11", there will be 14 total quantum, "task_1" will
# get 3/14 of this time, and "task_2" will get 11/14 of this time.
# These tasks should be CPU bound tasks only. An editor or IFF viewer
# would not be a good candidate, nor would a task which needs continous
# un-interrupted use of the CPU, such as a terminal program. The minimum
# permitted quantum count is 1, and the maximum is 100.
MANAGE "SceneryAnimator" 12
MANAGE "MandelPAUG" 8
MANAGE "longpi" 1
# *** LINES AFTER THIS POINT ARE NEW TO JM 1.1 ****************************
#--------------------------------------------------------------------------
# Some methods of starting background commands (the AmigaDos RUN command,
# for example) do not install the process name immediately upon invocation.
# Instead, the process name is "run" or some other non-descript string
# temporarily. This will confuse JM, which normally looks for the name
# immediately upon startup. This parameter will tell JM to delay checking
# the task name for N 10ths of a second after the task first appears. This
# should be made as small as possible. A value of 5 to 10 should be fine
# for most accelerated hard disk systems. You may need to tweak this value
# for slower machines. Permitted values are 0 to 50. Use high values only
# as a last resort.
INSTALL_DELAY 5
#--------------------------------------------------------------------------
# This switch turns the JM ARexx port on or off. Permitted values are "on"
# or "off". Default is "on".
AREXX_PORT on