home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.cs.arizona.edu
/
ftp.cs.arizona.edu.tar
/
ftp.cs.arizona.edu
/
icon
/
historic
/
v941.tgz
/
icon.v941src.tar
/
icon.v941src
/
ipl
/
packs
/
idol
/
idol.txt
< prev
next >
Wrap
Text File
|
2001-05-25
|
53KB
|
1,326 lines
Programming in Idol: An Object Primer
Clinton L. Jeffery
January 25, 1990; Last revised March 4, 1991
Idol is an object-oriented extension and environment for the Icon
programming language. This document describes Idol in two parts.
The first part presents Idol's object-oriented programming concepts
as an integral tool with which a programmer maps a good program
design into a good implementation. As such, it serves as the
"user's guide" for Idol's extensions to Icon. Idol's
object-oriented programming facilities are viewed within the
broader framework of structured programming and modular design
in general. Idol's precise syntax and semantics are detailed
in the second part, "An Icon-Derived Object Language", which
serves as a reference manual.
Object-Oriented Programming After a Fashion
Object-oriented programming means different things to different people.
In Idol, object-oriented programming centers around encapsulation,
inheritance, and polymorphism. These key ideas are shared by most
object-oriented languages as well as many languages that are not
considered object-oriented. This paper introduces these ideas and
illustrates their use in actual code. Idol is relevant in this
discussion because programming concepts are more than mental
exercises; they are mathematical notations by which programmers share
their knowledge.
Object-oriented programming can be done in Smalltalk, C++, or
assembler language for that matter, but this does not mean these
programming notations are equally desirable. Assembler languages
are not portable. For most programmers, Smalltalk uses an alien
notation; Smalltalk programs also share the flaw that they do not
work well in environments such as UNIX and DOS that consist of
interacting programs written in many languages. C++ has neither of
these flaws, but the same low-level machine-oriented character
that makes it efficient also makes C++ less than ideal as an
algorithmic notation usable by nonexperts.
Idol owes most of its desirable traits to its foundation, the Icon
programming language, developed at the University of Arizona
[Gris90]. In fact, Idol presents objects simply as a tool
to aid in the writing of Icon programs. Idol integrates a concise,
robust notation for object-oriented programming into a language
considerably more advanced than C or Pascal. Icon already uses a
powerful notation for expressing a general class of algorithms. The
purpose of Idol is to enhance that notation, not to get in the way.
Key Concepts
This section describes the general concepts that Idol supplies
to authors of large Icon programs. The following section provides
programming examples that employ these tools. The reader is
encouraged to refer back to this section when clarification in
the examples section is needed.
The single overriding reason for object-oriented programming
is the large program. Simple programs can be easily written in
any notation. Somewhere between the 1,000-line mark and the
10,000-line mark most programmers can no longer keep track of their
entire program at once. By using a very high-level programming language,
less lines of code are required; a programmer can write perhaps ten
times as large a program and still be able to keep track of things.
As programmers are required to write larger and larger programs,
the benefit provided by very-high level languages does not keep up
with program complexity. This obstacle has been labelled the
"software crisis", and object-oriented programming addresses this
crisis. In short, the goals of object-oriented programming are to
reduce the amount of coding required to write very large programs and
to allow code to be understood independently of the context of the
surrounding program. The techniques employed to achieve these goals
are discussed below.
Encapsulation
The primary concept advocated by object-oriented programming is the
principle of encapsulation. Encapsulation is the isolation, in the
source code that a programmer writes, of a data representation and the code
that manipulates the data representation. In some sense, encapsulation
is an assertion that no other routines in the program have "side-effects"
with respect to the data structure in question. It is easier to reason
about encapsulated data because all of the source code that could affect
that data is immediately present with its definition.
Encapsulation does for data structures what the procedure does for
algorithms: it draws a line of demarcation in the program text, the
outside of which is (or can be, or ought to be) irrelevant to the inside.
We call an encapsulated data structure an object. Just as a set of
named variables called parameters comprise the only interface between a
procedure and the code that uses it, a set of named procedures called
methods comprise the only interface between an object and the code that
uses it.
This textual definition of encapsulation as a property of program
source code accounts for the fact that good programmers can write
encapsulated data structures in any language. The problem is not
capability, but verification. In order to verify encapsulation some
object-oriented languages, like C++, define an elaborate mechanism by
which a programmer can govern the visibility of each data structure.
Like Smalltalk, Idol instead attempts to simplify verification by
preventing violations of encapsulation entirely.
Inheritance
In large programs, the same or nearly the same data structures are
used over and over again for a myriad of different purposes. Similarly,
variations on the same algorithms are employed by structure after
structure. In order to minimize redundancy, techniques are needed to
support code sharing for both data structures and algorithms.
Code is shared by related data structures by a programming concept
called inheritance.
The basic premise of inheritance is simple: if I need to write code
for a new data structure which is similar to one that's already
written, I can specify the new structure by giving the differences
between it and the old structure, instead of copying and then modifying
the old structure's code. Obviously there are times when the
inheritance mechanism is not useful: if the two data structures are
more different than they are similar, or if they are simple enough
that inheritance would only confuse things, for example.
Inheritance addresses a variety of common programming problems found
at different conceptual levels. The most obvious software engineering
problem it solves might be termed enhancement. During the
development of a program, its data structures may require extension
via new state variables or new operations or both; inheritance is
especially useful when both the original structure and the extension
are used by the application. Inheritance also supports
simplification, or the reduction of a data structure's state variables
or operations. Simplification is analogous to argument culling after
the fashion of the lambda calculus; it captures a logical relation
between structures rather than a common situation in software
development. In general, inheritance may be used in source code to
describe any sort of relational hyponymy, or special-casing; in Idol
the collection of all inheritance relations defines a directed (not
necessarily acyclic) graph.
Polymorphism
From the perspective of the writer of related data structures,
inheritance provides a convenient method for code sharing, but
what about the code that uses objects? Since objects are
encapsulated, that code is not dependent upon the internals of
the object at all, and it makes no difference to the client code
whether the object in questions belongs to the original class or the
inheriting class.
In fact, we can make a stronger statement. Due to encapsulation,
two different executions of some code that uses objects to implement
a particular algorithm may operate on different objects that are
not related by inheritance at all. Such code may effectively
be shared by any objects that happen to implement the operations
that the code invokes. This facility is called polymorphism, and
such algorithms are called generic. This feature is found in
non-object oriented languages; in object-oriented languages it is
a natural extension of encapsulation.
Object Programming
The concepts introduced above are used in many programming languages
in one form or another. The following text presents these concepts
in the context of actual Idol code. This serves a dual purpose:
it should clarify the object model adopted by Idol as well as
provide an initial impression of these concepts' utility in coding.
In order to motivate the constructs provided by Idol, our example
begins by contrasting conventional Icon code with Idol code which
implements the same behavior. The semantics of the Idol code given
here is defined by the Idol reference manual, included later in this
document in the section entitled, "An Icon-Derived Object Language".
Before Objects
In order to place Idol objects in their proper context, the first
example is taken from from regular Icon. Suppose I am writing some
text-processing application such as a text editor. Such applications
need to be able to process Icon structures holding the contents of
various text files. I might begin with a simple structure like the
following:
record buffer(filename,text,index)
where filename is a string, text is a list of strings
corresponding to lines in the file, and index is a marker for
the current line at which the buffer is being processed. Icon record
declarations are global; in principle, if the above declaration needs
to be changed, the entire program must be rechecked. A devotee of
structured programming would no doubt write Icon procedures to read
the buffer in from a file, write it out to a file, examine, insert
and delete individual lines, etc. These procedures, along with the
record declaration given above, can be kept in a separate source file
(buffer.icn) and understood independently of the program(s) in
which they are used. Here is one such procedure:
# read a buffer in from a file
procedure read_buffer(b)
f := open(b.filename) | fail
b.text := [ ]
b.position := 1
every put(b.text,!f)
close(f)
return b
end
There is nothing wrong with this example; in fact its similarity to the
object-oriented example that follows demonstrates that a good, modular
design is the primary effect encouraged by object-oriented programming.
Using a separate source file to contain a record type and those
procedures which operate on that type allows an Icon programmer to
maintain a voluntary encapsulation of that type.
After Objects
Here is the same buffer abstraction coded in Idol. This example
lays the groundwork for some more substantial techniques to follow.
class buffer(public filename,text,index)
# read a buffer in from a file
method read()
f := open(self.filename) | fail
selferase()
every put(self.text,!f)
close(f)
return
end
# write a buffer out to a file
method write()
f := open(self.filename,"w") | fail
every write(f,!self.text)
close(f)
end
# insert a line at the current index
method insert(s)
if self.index = 1 then {
push(self.text,s)
} else if self.index > *self.text then {
put(self.text,s)
} else {
self.text := self.text[1:self.index] ||| [s] |||
self.text[self.index:0]
}
self.index +:= 1
return
end
# delete a line at the current index
method delete()
if self.index > *self.text then fail
rv := self.text[self.index]
if self.index=1 then pull(self.text)
else if self.index = *self.text then pop(self.text)
else self.text := self.text[1:self.index]|||self.text[self.index+1:0]
return rv
end
# move the current index to an arbitrary line
method goto(l)
if (0 <= l) & (l <= self.index+1) then return self.index := l
end
# return the current line and advance the current index
method forward()
if self.index > *self.text then fail
rv := self.text[self.index]
self.index +:= 1
return rv
end
method erase()
self.text := [ ]
self.index := 1
end
initially
if (self.filename) then {
if not selfread() then selferase()
} else {
self.filename := "*scratch*"
selferase()
}
end
This first example is not complex enough to illustrate the full
object-oriented style, but its a start. Pertaining to the
general concepts introduced above, we can make the following
initial observations:
Polymorphism. A separate name space for each class's methods
makes for shorter names. The same method name can be used in each
class that implements a given operation. This notation is more
concise than is possible with standard Icon procedures. More
importantly it allows algorithms to operate correctly upon objects of
any class which implements the operations required by the algorithm.
Constructors. A section of code is executed automatically when
the constructor is called, allowing initialization of fields to values
other than &null. Of course, this could be simulated in Icon
by writing a procedure that had the same effect; the value of the
constructor is that it is automatic; the programmer is freed from the
responsibility of remembering to call this code everywhere objects are
created in the client program(s). This tighter coupling of memory
allocation and its corresponding initialization removes one more
source of program errors, especially on multiprogrammer projects.
These two observations share a common theme: the net effect is that
each piece of data is made responsible for its own behavior in the
system. Although this first example dealt with simple line-oriented
text files, the same methodology applies to more abstract entities
such as the components of a compiler's grammar (This example
is taken from the Idol translator itself, which provides another
extended example of polymorphism and inheritance.).
Idol's code sharing facilities are illustrated if we extend the above
example. Suppose the application is more than just a text editor---
it includes word-associative databases such as a dictionary,
bibliography, spell-checker, thesaurus, etc. These various databases
can be represented internally using Icon tables. The table entries
for the databases vary, but the databases all use string keyword
lookup. As external data, the databases can be stored in text files,
one entry per line, with the keyword at the beginning. The format
of the rest of the line varies from database to database.
Although all these types of data are different, the code used to
read the data files can be shared, as well as the initial construction
of the tables. In fact, since we are storing our data one entry per
line in text files, we can use the code already written for buffers
to do the file i/o itself.
class buftable : buffer()
method read()
selfbuffer.read()
tmp := table()
every line := !self.text do
line ? { tmp[tab(many(&letters))] := line | fail }
self.text := tmp
return
end
method index(s)
return self.text[s]
end
end
This concise example shows how little must be written to achieve
data structures with vastly different behavioral characteristics,
by building on code that is already written. The superclass
read() operation is one important step of the subclass
read() operation; this technique is common enough to have a
name: it is called method combination in the literature. It
allows one to view the subclass as a transformation of the
superclass. The buftable class is given in its entirety, but
our code sharing example is not complete: what about the data
structures required to support the databases themselves? They are all
variants of the buftable class, and a set of possible
implementations is given below. Note that the formats presented are
designed to illustrate code sharing; clearly, an actual application
might make different choices.
Bibliographies
Bibliographies might consist of a keyword followed by an uninterpreted
string of information. This imposes no additional structure on the
data beyond that imposed by the buftable class. An example
keyword would be Jeffery90.
class bibliography : buftable()
end
Spell-checkers
The database for a spell-checker is presumably just a list of words,
one per line; the minimal structure required by the buftable
class given above. Some classes exist to introduce new terminology
rather than define a new data structure. In this case we introduce
a lookup operation which may fail, for use in tests. In addition,
since many spell-checking systems allow user definable dictionaries
in addition to their central database, we allow spellChecker
objects to chain together for the purpose of looking up words.
class spellChecker : buftable(parentSpellChecker)
method spell(s)
return (self.text[s]) | ( (self.parentSpellChecker))spell(s)
end
end
Dictionaries
Dictionaries are slightly more involved. Each entry might consist of a
part of speech, an etymology, and an arbitrary string of uninterpreted
text comprising a definition for that entry, separated by semicolons.
Since each such entry is itself a structure, a sensible decomposition
of the dictionary structure consists of two classes: one that manages
the table and external file i/o, and one that handles the manipulation
of dictionary entries, including their decoding and encoding as
strings.
class dictionaryentry(word,pos,etymology,definition)
method decode(s) # decode a dictionary entry into its components
s ? {
self.word := tab(upto(';'))
move(1)
self.pos := tab(upto(';'))
move(1)
self.etymology := tab(upto(';'))
move(1)
self.definition := tab(0)
}
end
method encode() # encode a dictionary entry into a string
return self.word || ";" || self.pos || ";" ||
self.etymology || ";" || self.definition
end
initially
if /self.pos then {
# constructor was called with a single string argument
selfdecode(self.word)
}
end
class dictionary : buftable()
method read()
selfbuffer.read()
tmp := table()
every line := !self.text do
line ? { tmp[tab(many(&letters))] := dictionaryentry(line) | fail }
self.text := tmp
end
method write()
f := open(b.filename,"w") | fail
every write(f,(!self.text)encode())
close(f)
end
end
Thesauri
Although an oversimplification, one might conceive of a thesauri as a
list of entries, each of which consists of a comma-separated list of
synonyms followed by a comma-separated list of antonyms, with a
semicolon separating the two lists. Since the code for such a
structure is nearly identical to that given for dictionaries above,
we omit it here (but one might reasonably capture a generalization
regarding entries organized as fields separated by semicolons).
Objects and Icon Programming Techniques
In examining any addition to a language as large as Icon, a
significant question is how that addition relates to the rest of the
language. In particular, how does object-oriented programming fit into
the suite of advanced techniques used regularly by Icon programmers?
Previous sections of this document expound objects as an
organizational tool, analogous but more effective than the use of
separate compilation to achieve program modularity. Object-oriented
programming goes considerably beyond that viewpoint.
Whether viewed dynamically or statically, the primary effect achieved
by object-oriented programming is the subdivision of program data in
parallel with the code. Icon already provides a variety of tools that
achieve related effects:
Local and Static Variables in Icon procedures are the simplest
imaginable parallel association of data and code. We do not discuss
them further, although they are by no means insignificant.
Records allow a simple form of user-defined types. They provide
a useful abstraction, but keeping records associated with the right
pieces of code is still the job of the programmer.
String Scanning creates scanning environments. These are very
useful, but not very general: not all problems can be cast as
string operations.
Co-expressions save a program state for later evaluation. This
powerful facility has a sweeping range of uses, but unfortunately it
is a relatively expensive mechanism that is frequently misused to
achieve a simple effect.
Objects and classes, if they are successful, allow a significant
generalization of the techniques developed around the above
language mechanisms. Objects do not replace these language
mechanisms, but in many cases presented below they provide an
attractive alternative means of achieving similar effects.
Objects and Records
Objects are simply records whose field accesses are voluntarily
limited to a certain set of procedures.
Objects and Scanning Environments
String scanning in Icon is another example of associating a piece of
data with the code that operates on it. In an Icon scanning
expression of the form e1 ? e2, the result of evaluating
e1 is used implicitly in e2 via a variety of scanning
functions. In effect, the scanning operation defines a scope in which
state variables &subject and &pos are redefined.
[Walk86] proposes an extension to Icon allowing
programmer-defined scanning environments. The extension involves a new
record data type augmented by sections of code to be executed upon
entry, resumption, and exit of the scanning environment. The Icon
scanning operator was modified to take advantage of the new facility
when its first argument was of the new environment data type.
While objects cannot emulate Icon string scanning syntactically, they
generalize the concept of the programmer-defined scanning environment.
Classes in the Idol standard library include a wide variety of
scanning environments in addition to conventional strings. The
variation is not limited to the type of data scanned; it also includes
the form and function of the scanning operations. The form of
scanning operations available are defined by the state variables they
access; in the case of Icon's built-in string scanning, a single
string and a single integer index into that string.
There is no reason that a scanning environment cannot maintain a more
complex state, such as an input string, an output string, and a pair
of indices and directions for each string. Rather than illustrate
the use of objects to construct scanning environments with such an
abstract model, a concrete example is presented below.
List Scanning
List scanning is a straightforward adaptation of string scanning to
the list data type. It consists of a library class named
ListScan that implements the basic scanning operations, and
various user classes that include the scanning expressions. This
format is required due to Idol's inability to redefine the semantics
of the ? operator or to emulate its syntax in any reasonable
way. The state maintained during a list scan consists of
Subject and Pos, analogous to &subject and
&pos, respectively.
ListScan defines analogies to the basic scanning functions of
Icon, e.g. tab, upto, many, any, etc. These
functions are used in methods of a ListScan client class, which
in turn defines itself as a subclass of ListScan. A client such as:
class PreNum : ListScan()
method scan()
mypos := self.Pos
suspend selftab(selfupto(numeric))
self.Pos := mypos
end
end
may be used in an expression such as
(PreNum(["Tucson", "Pima", 15.0, [ ], "3"]))scan()
producing the result ["Tucson", "Pima"]. The conventional Icon
string scanning analogy would be: "abc123" ? tab(upto(&digits)),
which produces the result "abc". Note that ListScan
methods frequently take list-element predicates as arguments where
their string scanning counterparts take csets. In the above example,
the predicate numeric supplied to upto is an Icon
function, but predicates may also be arbitrary user-defined procedures.
The part of the Idol library ListScan class required to
understand the previous example is presented below. This code is
representative of user-defined scanning classes allowing pattern
matching over arbitrary data structures in Idol. Although
user-defined scanning is more general than Icon's built-in scanning
facilities, the scanning methods given below are always
activated in the context of a specific environment. Icon string
scanning functions can be supplied an explicit environment using
additional arguments to the function.
class ListScan(Subject,Pos)
method tab(i)
if i<0 then i := *self.Subject+1-i
if i<0 | i>*self.Subject+1 then fail
origPos := self.Pos
self.Pos := i
suspend self.Subject[origPos:i]
self.Pos := origPos
end
method upto(predicate)
origPos := self.Pos
every i := self.Pos to *(self.Subject) do {
if predicate(self.Subject[i]) then suspend i
}
self.Pos := origPos
end
initially
/(self.Subject) := [ ]
/(self.Pos) := 1
end
Objects and Co-expressions
Objects cannot come close to providing the power of co-expressions,
but they do provide a more efficient means of achieving well-known
computations such as parallel expression evaluation that have been
promoted as uses for co-expressions. In particular, a co-expression
is able to capture implicitly the state of a generator for later
evaluation; the programmer is saved the trouble of explicitly coding
what can be internally and automatically performed by Icon's
expression mechanism. While objects cannot capture a generator state
implicitly, the use of library objects mitigates the cost of
explicitly encoding the computation to be performed, as an
alternative to the use of co-expressions. The use of objects also is
a significant alternative for implementations of Icon in which
co-expressions are not available or memory is limited.
Parallel Evaluation
In [Gris87], co-expressions are used to obtain the results
from several generators in parallel:
decimal := create(0 to 255)
hex := create(!"0123456789ABCDEF" || !"0123456789ABCDEF")
octal := create((0 to 3) || (0 to 7) || (0 to 7))
character := create(image(!&cset))
while write(right(@decimal,3)," ",@hex," ",@octal," ",@character)
For the Idol programmer, one alternative to using co-expressions would
be to link in the following code from the Idol standard library:
procedure sequence(bounds[ ])
return Sequence(bounds)
end
class Sequence(bounds,indices)
method max(i)
elem := self.bounds[i]
return (type(elem)== "integer",elem) | *elem-1
end
method elem(i)
elem := self.bounds[i]
return (type(elem)== "integer",self.indices[i]) |
elem[self.indices[i]+1]
end
method activate()
top := *(self.indices)
if self.indices[1] > selfmax(1) then fail
s := ""
every i := 1 to top do {
s ||:= selfelem(i)
}
repeat {
self.indices[top] +:= 1
if top=1 | (self.indices[top] <= selfmax(top)) then break
self.indices[top] := 0
top -:= 1
}
return s
end
initially
/ (self.indices) := list(*self.bounds,0)
end
On the one hand, the above library code is neither terse nor general
compared with co-expressions. This class does, however, allow the
parallel evaluation problem described previously to be coded as:
dec := sequence(255)
hex := sequence("0123456789ABCDEF","0123456789ABCDEF")
octal := sequence(3,7,7)
character := sequence(string(&cset))
while write(right(@dec,3)," ",@hex," ",@octal," ",image(@character))
$@ is the unary Idol meta-operator that invokes the
activate() operation. Since the sequence class is already
written and available, its use is an attractive alternative to
co-expressions in many settings. For example, a general class of
label generators (another use of co-expressions cited in
[Gris87]) is defined by the following library class:
class labelgen : Sequence(prefix,postfix)
method activate()
return self.prefix||selfSequence.activate()||self.postfix
end
initially
/(self.prefix) := ""
/(self.postfix) := ""
/(self.bounds) := [50000]
end
After creation of a label generator object (e.g.
label := labelgen("L",":")), each resulting label is obtained
via $@label. The sequence defined by this example is
L0:
L1:
...
L50000:
Conclusion
Idol presents object programming as a collection of tools to reduce
the complexity of large Icon programs. These tools are encapsulation,
inheritance, and polymorphism. Since a primary goal of Idol is to
promote code sharing and reuse, a variety of specific programming
problems have elegant solutions available in the Idol class library.
An Icon-Derived Object Language
This section serves as the language reference manual for Idol. Idol
is a preprocessor for Icon which implements a means of associating a
piece of data with the procedures which manipulate it. The primary
benefits to the programmer are thus organizational. The Icon
programmer may view Idol as providing an augmented record type in
which field accesses are made not directly on the records' fields, but
rather through a set of procedures associated with the type.
Classes
Since Idol implements ideas found commonly in object-oriented
programming languages, its terminology is taken from that domain. The
augmented record type is called a "class". The syntax of a class is:
class foo(field1,field2,field3,...)
# procedures to access
# class foo objects
[code to initialize class foo objects]
end
In order to emphasize the difference between ordinary Icon procedures
and the procedures which manipulate class objects, these procedures
are called "methods" (the term is again borrowed from the
object-oriented community). Nevertheless, the syntax of a method is
that of a procedure:
method bar(param1,param2,param3,...)
# Icon code which may access
# fields of a class foo object
end
Since execution of a class method is always associated with a given
object of that class, the method has access to an implicit variable
called self which is a record containing fields whose names are
those given in the class declaration. References to the self variable
look just like normal record references; they use the dot (.)
operator. In addition to methods, classes may also contain regular
Icon procedure, global, and record declarations; such declarations
have the standard semantics and exist in the global Icon name space.
Objects
Like records, instances of a class type are created with a constructor
function whose name is that of the class. Instances of a class are
called objects, and their fields may be initialized explicitly in the
constructor in exactly the same way as for records. For example,
after defining a class foo(x,y) one may write:
procedure main()
f := foo(1,2)
end
The fields of an object need not be initialized by the class
constructor. For many objects it is more logical to initialize their
fields to some standard value. In this case, the class declaration
may include an "initially" section after its methods are defined and
before its end.
This section begins with a line containing the word "initially" and
then contains lines which are executed whenever an object of that
class is constructed. These lines may reference and assign to the
class fields as if they were normal record fields for the object being
constructed. The "record" being constructed is named self;
more on self later.
For example, suppose one wished to implement an enhanced table type
which permitted sequential access to elements in the order they were
inserted into the table. This can be implemented by a combination of
a list and a table, both of which would initialized to the appropriate
empty structure:
class taque(l,t) # pronouned `taco'
# methods to manipulate taques,
# e.g. insert, index, foreach...
initially
self.l := [ ]
self.t := table()
end
And in such a case one can create objects without including arguments
to the class constructor:
procedure main()
mytaque := taque()
end
In the absence of an initially section, missing arguments to a
constructor default to the null value. Together with an initially
section, the class declaration looks rather like a procedure that
constructs objects of that class. Note that one may write classes
with some fields that are initialized explicitly by the constructor
and other fields are initialized automatically in the initially
section. In this case one must either declare the automatically
initialized fields after those that are initialized in the
constructor, or insert &null in the positions of the
automatically initialized fields in the constructor.
Object Invocation
Once one has created an object with a class constructor, one
manipulates the object by invoking methods defined by its class.
Since objects are both procedures and data, object invocation is
similar to both a procedure call and a record access. The dollar
($) operator invokes one of an object's methods. The syntax is
object $ method name ( arguments )
where the parenthesis may be omitted if the argument list
is empty. $ is used similarly to the dot (.) operator used to
access record fields. Using the taque example:
procedure main()
mytaque := taque()
mytaqueinsert("greetings","hello")
mytaqueinsert(123)
every write(mytaqueforeach())
if \(mytaqueindex("hello"))
then write(", world")
end
Note that direct access to an object's fields using the usual dot (.)
operator is not possible outside of a method of the appropriate class.
Attempts to reference mystack.l in procedure main() would result in
a runtime error (invalid field name). Within a class method, the
implicit variable self allows access to the object's fields in
the usual manner. The taque insert method is thus:
method insert(x,key)
/key := x
put(self.l,x)
self.t[key] := x
end
The self variable is both a record and an object. It allows field
access just like a record, as well as method invocation like any other
object. Thus class methods can use self to invoke other class methods
without any special syntax.
Inheritance
In many cases, two classes of objects are very similar. In
particular, many classes can be thought of simply as enhancements of
some class that has already been defined. Enhancements might take the
form of added fields, added methods, or both. In other cases a class
is just a special case of another class. For example, if one had
defined a class fraction(numerator, denominator), one might want to
define a class inverses(denominator) whose behavior was identical to
that of a fraction, but whose numerator was always 1.
Idol supports both of these ideas with the concept of inheritance.
When the definition of a class is best expressed in terms of the
definition of another class or classes, we call that class a subclass
of the other classes. This corresponds to the logical relation of
hyponymy. It means an object of the subclass can be manipulated just
as if it were an object of one of its defining classes. In practical
terms it means that similar objects can share the code that
manipulates their fields. The syntax of a subclass is
class foo : superclasses (fields...)
# methods
[optional initially section]
end
Multiple Inheritance
There are times when a new class might best be described as a
combination of two or more classes. Idol classes may have more than
one superclass, separated by colons in the class declaration. This is
called multiple inheritance.
Subclasses define a record type consisting of all the fieldnames found
in the class itself and in all its superclasses. The subclass has
associated methods consisting of those in its own body, those in the
first superclass which were not defined in the subclass, those in the
second superclass not defined in the subclass or the first superclass,
and so on. Fields are initialized either by the constructor or by the
initially section of the first class of the class:superclass list in
which the field is defined. For example, to define a class of
inverses in terms of a class fraction(numerator,denominator) one
would write:
class inverse : fraction (denominator)
initially
self.numerator := 1
end
Objects of class inverse can be manipulated using all the methods
defined in class fraction; the code is actually shared by both classes
at runtime.
Viewing inheritance as the addition of fieldnames and methods of
superclasses not already defined in the subclass is the opposite of
the more traditional object-oriented view that a subclass starts with
an instance of the superclass and augments or overrides portions of
the definition with code in the subclass body. Idol's viewpoint adds
quite a bit of leverage, such as the ability to define classes which
are subclasses of each other. This feature is described further below.
Invoking Superclass Operations
When a subclass defines a method of the same name as a method defined
in the superclass, invocations on subclass objects always result in
the subclass' version of the method. This can be overridden by
explicitly including the superclass name in the invocation:
objectsuperclass.method(parameters)
This facility allows the subclass method to do any additional work
required for added fields before or after calling an appropriate
superclass method to achieve inherited behavior. The result is
frequently a chain of inherited method invocations.
Public Fields
As noted above, there is a strong correspondence between records and
classes. Both define new types that extend Icon's built-in
repertoire. For simple jobs, records are slightly faster as well as
more convenient: the user can directly read and write a record's
fields by name.
Classes, on the other hand, promote the re-use of code and reduce the
complexity required to understand or maintain large, involved
structures. They should be used especially when manipulating
composite structures ontaining mixes of structures as elements, e.g.
lists containing tables, sets, and lists in various positions.
Sometimes it is useful to access fields in an object
directly, as with records. An example from the Idol program itself is
the name field associated with methods and classes---it is a
string which is intended to be read outside the object. One can
always implement a method which returns (or assigns, for that matter)
a field value, but this gets tedious. Idol currently supports
read-only access to fields via the public keyword. If
public precedes a fieldname in a class declaration, Idol
automatically generates a method of the same name which dereferences
and returns the field. For example, the declaration
class sinner(pharisee,public publican)
generates code equivalent to the following class method in addition
to any explicitly defined methods:
method publican()
return .(self.publican)
end
This feature, despite its utility and the best of intentions, makes it
possible to subvert object encapsulation: it should not be
used with fields whose values are structures, since the structure
could then be modified from the outside. When invoked with the
-strict option, Idol generates code for public methods which
checks for a scalar type at runtime before returning the field.
Superclass Cycles and Type Equivalence
In many situations, there are several ways to represent the same
abstract type. Two-dimensional points might be represented by
Cartesian coordinates x and y, or equivalently by radial coordinates
expressed as degree d and radian r. If one were implementing classes
corresponding to these types there is no reason why one of them should
be considered a subclass of the other. The types are truly
interchangeable and equivalent.
In Idol, expressing this equivalence is simple and direct. In defining
classes Cartesian and Radian we may declare them to be superclasses of
each other:
class Cartesian : Radian (x,y)
# code which manipulates objects using cartesian coordinates
end
class Radian : Cartesian (d,r)
# code which manipulates objects using radian coordinates
end
These superclass declarations make the two types equivalent names for
the same type of object; after inheritance, instances of both classes
will have fields x, y, d, and r, and support
the same set of operations.
Equivalent types each have their own constructor given by their class
name; although they export the same set of operations, the actual
procedures invoked by the different instances may be different. For
example, if both classes define an implementation of a method
print, the method invoked by a given instance depends on
which constructor was used when the object was created.
If a class inherits any methods from one of its equivalent
classes, it is responsible for initializing the state of all
the fields used by those methods in its own constructor, and
maintaining the state of the inherited fields when its methods make
state changes to its own fields. In the geometric example given
above, in order for class Radian to use any methods inherited
from class Cartesian, it must at least initialize x and
y explicity
in its constructor from calculations on its d and r parameters.
In general, this added responsibility is minimized in those classes
which treat an object's state as a value rather than a structure.
The utility of equivalent types expressed by superclass cycles remains
to be seen. At the least, they provide a convenient way to write
several alternative constructors for the same class of objects.
Perhaps more importantly, their presence in Idol causes us to question
the almost religious dogmatism that the superclass graph must always
be acyclic.
Miscellany
Unary Meta-operators
Idol supports some shorthand for convenient object invocation. In
particular, if a class defines methods named size, foreach, random,
or activate, these methods can be invoked by a modified version of
the usual Icon operator:
$*x is equivalent to xsize()
$?x is equivalent to xrandom()
$!x is equivalent to xforeach()
$@x is equivalent to xactivate()
Other operators may be added to this list. If x is an identifier
it may be used directly. If x is a more complex expression such as a
function call, it should be parenthesized, e.g.
$*(complex_expression()).
Parentheses are also required in the case of invoking an object
returned from an invocation, e.g.
(classesindex("theClass"))name()
These requirements are artifacts of the first implementation and are
subject to change.
Nonunary Meta-operators
In addition to the unary meta-operators described above, Idol supports
certain operators with more exotic capabilities. The expression
x $$ y(arguments) denotes a list invocation of method
y for object x and is analogous to Icon's list invocation operator
(binary !). Arguments is some list which will be
applied to the method as its actual parameter list. List invocation
is particularly useful in handling methods which take a variable
number of arguments and allows such methods to call each other.
Idol list invocation is a direct application of Icon list invocation
to object methods that could not be done otherwise without knowledge
of Idol internals.
Another binary meta-operator is the object index operator given by
$[, as in the expression x $[ e ]. This expression
is an equivalent shorthand for x$index(e). Note that only
the left brace is preceded by a dollar sign. The expression in the
braces is in actuality simply a comma separated list of arguments
to the index method.
Constants
As a convenience to the programmer, Idol supports constant
declarations for the builtin Icon types that are applicative---
strings, integers, reals, and csets. Constant declarations are
similar to global variable declarations with a predefined value:
const E_Tick := ".", E_Line := "_", E_Mask := '._'
Constant declarations are defined from their point of declaration
to the end of the source file if they are defined globally, or to
the end of the class definition if they are located within a class.
Constants may not be declared within a procedure. Constants are
equivalent to the textual replacement of the name by the value.
Include Files
Idol supports an \#include directive as a convenience to the programmer.
The include directive consists of a line beginning with the string
"\#include" followed by a filename that is optionally enclosed
in quotation marks. When the include directive is encountered, Idol
reads the contents of the named file as if it were part of the
current file. Include files may be nested, but not recursive.
Since Idol and Icon do not have a compile-time type system, their need
for sharing via file inclusion is significantly less than in
conventional programming languages. Nevertheless, this is one of the
more frequently requested features missing in Icon. Include files are
primarily intended for the sharing of constants and global variable
identifiers in separately translated modules.
Implementation Restrictions
The Idol preprocessor is written in Idol and does not actually parse
the language it purports to implement. In particular, the
preprocessor is line-oriented and the initially keyword, and the class
and method end keyword need to be on a line by themselves. Similarly,
both the object being invoked and its method name must be on the
same line for invocations. If an object invocation includes an
argument list, it must begin on the line of the invocation, since
Idol inserts parentheses for invocations where they are omitted. This
is comparable to Icon's semi-colon insertion; it is a convenience that
may prove dangerous to the novice. Likewise, the $[ index
operator, its arguments, and its corresponding close brace must all
be on the same line with the invoking object.
Class and method declarations are less restricted: the field/parameter
list may be written over multiple lines if required, but the keyword is
recognized only if it begins a line (only whitespace may precede it),
and that line must include the class/method name, any superclasses,
and the left parenthesis that opens the field/parameter list.
The Idol preprocessor reserves certain names for internal use. In
particular, __state and __methods are not legal class
field names. Similarly, the name idol_object is reserved in the
global name space, and may not be used as a global variable, procedure,
or record name. Finally, for each class foo amongst the user's
code, the names foo, foo__state, foo__methods,
foo__oprec are reserved, as are the names foo_bar
corresponding to each method bar in class foo. These
details are artifacts of the current implementation and are subject
to change.
Caveats
Subclass constructors can be confusing, especially when multiple
inheritance brings in various fields from different superclasses.
One significant problem for users of the subclass is that the
parameters expected in the constructor may not be obvious if they
are inherited from a superclass. On the other side of the spectrum,
superclasses which automatically initialize their fields can be
less than useful if the subclass might need to override the
default initialization value--the subclass must then explicitly
name the field in order to make its initially section have
precedence over the superclass.
The first of the two problems given above can be solved by naming
fields explicitly in a subclass when initialization by constructor.
This achieves clarity at the expense of changing the inheritance
behavior, since the subclass no longer inherits the superclass
automatic initialization for that field if there is one. The latter
of the two problems can generally be solved by using the / operator
in automatic field initializations unless the initialization should
never be overridden.
While it is occasionally convenient to redeclare an inherited field
in a subclass, accidentally doing so and then using that field to store an
unrelated value would be disastrous. Although Idol offers no proper
solution to this problem, the -strict option causes the generation
of warning messages for each redefined field name noting the relevant
sub- and superclasses.
Running Idol
Idol requires Version 8 of Icon. It runs best on UNIX
systems. It has been ported to most but not all the various systems
on which Icon runs. In particular, if your version of Icon does not
support the system() function, or your machine does not have
adequate memory available, Idol will not be able to invoke icont
to complete its translation and linking. Since Idol is untested on
some systems, you may have to make small changes to the source code
in order to port it to a new system.
Since its initial inception, Idol has gone through several major
revisions. This document describes Idol Version 8. Contact the
author for current version information.
Getting a Copy
Idol is in the public domain. It is available on the Icon RBBS and by
anonymous ftp from cs.arizona.edu. Idol is also distributed with
the program library for Version 8 of Icon and is available by U.S.
mail in this way. Interested parties may contact the author
(cjeffery@cs.arizona.edu):
Clinton Jeffery
Department of Computer Science
University of Arizona
Tucson, AZ 85721
Creating an Idol Executable
Idol is typically distributed in both Idol and Icon source forms.
Creating an Idol executable requires a running version of Icon and a
copy of idolboot.icn, the Icon source for Idol. A second Icon
source file contains the operating-system dependent portion of Idol;
for example, unix.icn (see the Idol README file for the name of
your system file if you are not on a UNIX system; you may have to
write your own, but it is not difficult). Using icont, compile
idolboot.icn and unix.icn into an executable file (named
idolboot, or idolboot.icx). As a final step, rename this
executable to idol (or idol.icx).
Translating Idol Programs
The syntax for invoking idol is normally
idol file1[.iol] [files...]
(on some systems you may have to say "iconx idol" where it
says "idol" above). The Idol translator creates a separate
Icon file for each class in the Idol source files you give it. On
most systems it calls icont automatically to create ucode for these
files. If the first file on the command line has any normal Icon code
in it (in addition to any class definitions it may contain), Idol
attempts to link it to any classes it may need and create an executable.
The file extension defaults to .iol. Idol also accepts
extensions .icn, .u1, and .cl. The first two refer
to Icon source or already translated code for which Idol generates
link statements in the main (initial) Idol source file. Idol treats
arguments with the extension .cl as class names and generates
link statements for that class and its superclasses. Class names are
case-sensitive; Deque.cl is not the same class as deque.cl.
References
[Gris87]
Griswold, R.E.
Programming in Icon; Part I---Programming with
Co-Expressions.
Technical Report 87-6, Department of Computer Science, University of
Arizona, June 1987.
[Gris90]
Griswold, R.E. and Griswold, M.T.
The Icon Programming Language, second edition.
Prentice-Hall, Englewood Cliffs, New Jersey, 1990.
[Walk86]
Walker, K.
Dynamic Environments---A Generalization of Icon String
Scanning.
Technical Report 86-7, Department of Computer Science, University of
Arizona, March 1986.