home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.barnyard.co.uk
/
2015.02.ftp.barnyard.co.uk.tar
/
ftp.barnyard.co.uk
/
cpm
/
walnut-creek-CDROM
/
OSBORNE
/
OTERM401.DOC
< prev
next >
Wrap
Text File
|
2000-06-30
|
50KB
|
2,441 lines
OTERM.DOC -- OTERM Terminal Simulator page 1
Copyright 1981, 1982 Michael M Rubenstein
Version 4.00 (4 Oct 82)
Credits.
The modem protocol used for file transmission was
developed by Ward Christensen.
The modem protocol was extended to use the cyclical
redundancy code by John Mahr.
The subprogram to compute the cyclical redundancy
code was written by Paul Hansknecht.
The window manager is based on one written by Robert
Lansdale.
All four gentlemen have made their work freely
available for noncommercial purposes.
Ideas for many the features of OTERM have come from
other terminal programs. The authors of these pro-
grams must share the credit for OTERM.
Most of OTERM is now written in C. It was compiled
with the Software Toolworks C/80 compiler.
A large number of people have offered suggestions
and encouragement in developing this program. I
thank all of them.
The CompuServe CP/M Interest Group (CP-MIG) has been
a valuable forum for discussion and a source of a
great many ideas used in OTERM.
OTERM.DOC -- OTERM Terminal Simulator page 2
Description.
OTERM allows the user to communicate with time shar-
ing services, computerized bulletin boards, and
other computers. Special features of OTERM include:
- a circular log of the session is kept.
This log is under the control of the user.
It may be browsed without exiting OTERM.
- an optional warning is provided when the
log is almost full. If the remote device
supports it, transmission will be halted
with a control S. If a file is being
sent, the transmission is interrupted (it
can be restarted.)
- a file may be received without a protocol.
If the remote supports ^s/^q to stop and
start transmission, the file may be larger
than main memory.
- files may be sent to the remote computer
without a special protocol for trans-
mission.
- any command which can be entered from the
keyboard may also be entered from a file
or from a function key.
- file tranmission may be interrupted from
the keyboard or from a command contained
in the file. Transmission may be re-
started without loss of data.
- the Ward Christensen modem protocol is
implemented. This allows error free com-
munications with remote CP/Ms or other
computers.
- the CIS A protocol is implemented. This
allows error free communications with
CompuServe Information Services.
- optionally lines may be wrapped so as to
keep words on a single line (word wrap)
- commands to OTERM are entered using
function key 1. Help menus are available
by entering ? in response to any prompt.
- extended function keys are available.
names of extended function keys may be up
to 127 characters long and data sent by a
function key may be up to 4094 characters.
OTERM.DOC -- OTERM Terminal Simulator page 3
- the directory of a disk may be viewed from
OTERM.
- files may be deleted from OTERM.
- files may be typed from OTERM.
OTERM.DOC -- OTERM Terminal Simulator page 4
Limitations.
OTERM will run only on an Osborne 1 computer. The
revision level must be 1.2 or higher (the original
rev A is no longer supported).
No printer support is provided.
OTERM is primarily designed for operator attended
communications. There is no provision for auto
answer.
OTERM contains no provision for special modems.
However with some modems, function keys can be used
for autodialing or other functions.
OTERM.DOC -- OTERM Terminal Simulator page 5
New features/corrections in version 4.
Note: Version 4.00 is almost a complete rewrite of
the program. Much of it has be rewritten in
C.
Browsing of the log has been implemented.
The CIS A protocol has been implemented.
Access to the directory , typing and deletion of
files have been implemented.
Extended function keys have been implemented.
A window manager is now used to allow prompting for
commands, display of messages from OTERM and of the
log and directory. Escape sequences are not used
except from a file.
OTERM.DOC -- OTERM Terminal Simulator page 6
Using OTERM (summary).
The modem should always be in full duplex mode for
use with OTERM. Follow the modem manufacturer's and
the Osborne instructions for connecting the modem.
Note than almost all modem's will require that pin 2
on the modem be connected to pin 3 on the computer
and pin 3 on the modem be connected to pin 2 on the
computer.
On exiting OTERM the RS232 interface will be reset
to the same options as at entry.
The setting of the rs232 rate and the line size on
the disk have no effect on OTERM. OTERM always uses
it's internal settings.
As distributed, on startup OTERM is set to commun-
icate with most time sharing services. The default
characteristics may be changed temporarily or OTERM
can easily be modified to start up with different
characteristics.
Establish communications following the modem manu-
facturer's and the remote service's instructions.
Commands to OTERM are preceded by function key 1
(control 1). Other function keys are used for OTERM
functions.
Several OTERM functions require significant time for
disk access during which OTERM cannot check the
modem. If the remote responds to control s to stop
and control q to restart and OTERM is informed of
this through the delay command, OTERM will stop the
remote during these operations and no data will be
lost.
OTERM.DOC -- OTERM Terminal Simulator page 7
Function Keys.
OTERM takes over the function keys. The function
keys have the following meanings:
-------------------------------------------
| 7 | 8 | 9 |
| | | |
| scroll up | scroll up | cancel |
| half | full | file |
| | | or fk |
| | | |
-------------------------------------------
| 4 | 5 | 6 |
| | | |
| scroll down | scroll down | cancel |
| half | full | special |
| | | display |
| | | |
-------------------------------------------
| 1 | 2 | 3 |
| | | |
| command | extended | standard |
| | function | function |
| | key | key |
| | | |
-------------------------------------------
A display similar to the above may be viewed by
entering the fkhelp command.
Use of function keys:
Key Use
--- ----------------------------------------------
1 Signals OTERM that a command is to be entered.
2 Signals OTERM that an extended function key is
to be entered. OTERM will prompt for the name
of the function key. Extended function keys
are installed in OTERM with the program
OTSETUP. Note, that if the name of the
function key is a single digit, the Osborne
function key (installed with SETUP) will be
used. This function may not be used while
entering an OTERM command.
3 Signals OTERM that an Osborne function key is
to be entered. OTERM does not prompt for the
name of the function key, which must be a
single digit or a single letter. If a single
letter, the extended function key installed by
OTSETUP will be used. This function may be
used at any time, including while entering an
OTERM command.
OTERM.DOC -- OTERM Terminal Simulator page 8
4 Scrolls the special display down by half the
size of the window.
5 Scrolls the special display down by the size
of the window.
6 Clears special display (browse log, directory,
typed file or the function key display).
7 Scrolls the special display up by half the
size of the window.
8 Scrolls the special display up by the size of
the window.
9 Cancels a protocol file transfer or halts
transmission without protocol of a file. A
transmission without protocol may be continued
without loss.
OTERM.DOC -- OTERM Terminal Simulator page 9
Extended function keys.
Extended or Osborne function keys may be nested to a
depth of 16. There is no checking for recursion.
All function keys are canceled when a file read is
started, but a file read may contain function keys.
That is, if a function key contains a file read
command, nothing in the function key will be
processed after the command.
Extended function keys are installed in OTERM with
the program otsetup. See otsetup.doc for details.
OTERM.DOC -- OTERM Terminal Simulator page 10
OTERM Commands.
When function key 1 is entered, OTERM opens a window
at the top of the screen and prompts for a command.
You may then enter a command with or without argu-
ments. In most cases, if no arguments are entered,
OTERM will then prompt for them. In a few cases
(e.g. dir) a default will be used. At any prompt
you may enter a ? (followed by return) to see a list
of possible operands or a description of the com-
mand.
In scanning commands, OTERM allows abbreviation to
the minimum number of letters needed to identify the
command or operand. Commands are checked in
alphabetic order so the line command may be
abbreviated "l", but the log command requires at
least "lo". Commands and operands may be be entered
in upper or lower case.
In some cases (e.g. log) if no operand is entered,
the current status is displayed.
Examples:
cmd: log on (will turn log on)
cmd: log (will display log status and
prompt for operands)
cmd: quit (will exit OTERM)
Several commands require the entry of a file name.
OTERM uses a generalized file system which does not
permit the use of "/" or "\" in a file name (of
course the usual illegal characters are not allowed
either). The slashes are used to set flags for the
file system. The only flag which is of use in OTERM
is \b, which causes an old file with the same name
to be deleted, rather than renamed to <name>.bak.
Simply append this flag to the end of the name
(after the extension) with no intervening spaces.
The old file will only be deleted after the new file
is successfully written.
All file names may be entered in upper or lower
case.
A new disk may be mounted whenever there are no open
files. A new disk may also be mounted on any drive
except the default drive (the drive which is shown
in the CP/M prompt, e.g. A>) whenever there are no
files open on it. Remember, halting the reading of
a file with function key 9 does not close the file.
OTERM.DOC -- OTERM Terminal Simulator page 11
To modify OTERM to use new defaults, simply enter
the desired commands, exit with the quit command,
and save the program with the CP/M save command.
Remember to check the current size of OTERM with
stat before entering OTERM.
The following sections describe in detail the OTERM
commands.
OTERM.DOC -- OTERM Terminal Simulator page 12
log command.
A log of the session is kept in memory. As distri-
buted, this log is enabled at start up. The log is
circular; that is, when the log is filled, char-
acters at the beginning are deleted as new char-
acters are added. The size of the log depends on
the version. The log is always cleared when OTERM
is entered.
If this command is entered without operands, the
status of the log will be displayed.
In full duplex mode, only characters received from
the remote device are entered in the log. In half
duplex mode all characters sent or received are
entered. In host mode only characters sent are
entered in the log.
Since OTERM does not recognize deletion of char-
acters or lines, it usually will be necessary to
edit the log after writing it to disk to eliminate
errors. The log may be edited with WordStar or ED.
This is also useful for eliminating extraneous
material from the log (e.g. commands or messages
when a program source file is listed and logged.)
The following operands are recognized:
Operand Function
----------- -------------------------------------
clear Clears the log and starts entering
data into it.
endfile Stops automatic saving of the log.
file Starts automatic saving of the log in
a file. The file name is entered
after the word "file". If not enter-
ed, you will be prompted. This must
be the last operand on the line.
nowarn Turns off warning of log being almost
full.
off Turns off the log. Data currently in
the log is not lost.
on Turns on the log. Data currently in
the log is not lost.
warn Turns on warning of log being almost
full. When the log is almost full,
you will be informed with three bells
and, if the remote responds to
OTERM.DOC -- OTERM Terminal Simulator page 13
control s and control q (and OTERM is
informed of this through the delay
command) a control s will be sent. A
control q will not be sent automati-
cally. Warning is not effective if
the log is being automatically saved.
write Writes the current log to a file.
The file name is be entered after the
word "write". If not entered, you
will be prompted. This must be the
last operand on the line.
A common (and the simplest) method of using the log
is to simply ignore it until something is received
which one wants to save. The log is then saved and
later edited to eliminate unwanted material.
OTERM.DOC -- OTERM Terminal Simulator page 14
browse command.
The browse command is used to view the log. While
active, the screen is split with the log displayed
in the upper half and the terminal display in the
lower. The scrolling function keys (4, 5, 7, and 8)
are active while the log is being displayed.
To turn off the log, use function key 6.
The following operands are recognized:
Operand Function
----------- -------------------------------------
down Followed by a number. Scrolls the
log down the specified number of
lines. Note: during scrolling, input
from the remote cannot be completely
processed and some data may be lost
if the number of lines is larger than
about 400 (at 300 baud). This must
be the last operand on the line.
end Starts browsing the log, showing the
last data entered.
start Starts browsing the log, showing the
oldest data entered.
up Followed by a number. Scrolls the
log up the specified number of lines.
Note: during scrolling, input from
the remote cannot be completely pro-
cessed and some data may be lost if
the number of lines is larger than
about 400 (at 300 baud). This must
be the last operand on the line.
If no operand is entered, "end" will be assumed.
The display of the log will not be usable if the log
does not contain line feeds. This will occur if
line feeds are supplied on the console rather than
by the remote service or by the transmission
routines.
OTERM.DOC -- OTERM Terminal Simulator page 15
cis command.
Used to turn recognition of CompuServe A protocol on
or off. Usually, recognition of CompuServe protocol
will cause no problems, but there is a slight chance
that some other service will send control sequences
which make OTERM think it is engaged in an exchange
with CompuServe. If this happens, turn off cis
protocol.
The possible operands are "on" or "off".
If entered without operands, the status of cis mode
will be displayed.
CIS file transfers are initiated by the remote by
sending a special sequence of characters. OTERM
will notify you of the transfer. If it is an upload
(transmission to the remote) the file size and
estimated transmission time will be shown.
The progress of the transmission will be displayed.
Under this protocol blocks are variable length, but
are normally either 128 characters or 256 char-
acters. When sending, all blocks except, possibly,
for the last are 256 characters.
A file transfer may be cancelled with function key
9. The other system is notified of the cancel-
lation.
OTERM.DOC -- OTERM Terminal Simulator page 16
clear command.
This command clears the screen. This is a local
operation. Nothing is transmitted or logged.
OTERM.DOC -- OTERM Terminal Simulator page 17
console command.
The console command controls the display of informa-
tion sent or received. It has no effect on the log
or on the data transmitted:
If entered without operands, the status of the con-
sole will be displayed.
The following operands are recognized:
Operand Function
----------- -------------------------------------
autolf Treats a carriage return as the start
of a new line (i.e displays as if it
were a carriage return line feed).
bsdel Deletes the previous character when a
backspace is received.
control Control characters are passed to the
screen output routines and act as
defined in the Osborne user's manual.
ffclr Clears the screen when a form feed is
received.
ignorectl Control characters are ignored.
maskctl Control characters are displayed as
periods.
noautolf Turns off autolf. A carriage return
moves the cursor to the left, but
does not start a new line.
nobsdel Turns off bsdel. A backspace moves
the cursor left one character, but
does not delete the character.
nowwrap Turns off word wrap. On reaching the
end of the line on the screen, a new
line is started immediately.
showctl Control characters are displayed as
"^" followed by a printing character.
Rubout is displayed as "^?".
wwrap Turns on word wrap. On reaching the
end of a line, the line is broken at
a word boundary. For the purposes of
OTERM, a word boundary is a carriage
return, line feed, space or
horizontal tab. Note: word wrap is
done at the end of the logical line
OTERM.DOC -- OTERM Terminal Simulator page 18
as specified in the line command, not
necessarily at the end of the
physical screen. This option will
probably not be too useful if the
line size is set to greater than 52.
The four options to control display of control codes
apply to most nondisplayable codes. Carriage
return, line feed, back space, and horizontal tab
are not affected. Form feed is not affected if
ffclr is on. Nulls are displayed only under
showctl.
Control z, which normally clears the screen on the
Osborne, will be ignored if control and ffclr are
both set on.
OTERM.DOC -- OTERM Terminal Simulator page 19
delay command.
When sending a file or a function key to a remote
computer, it may be necessary to give the remote
some time to process the data. This is accomplished
with the delay command.
Except for "usectls", the delay mode commands not
meaningful except when a file or function key is
being sent.
If no operands are given, the delay status will be
displayed.
The following operands are recognized:
Operand Function
----------- -------------------------------------
char Sets delay mode to character. When a
delay is required, it will end
whenever a character is received from
the remote. This is the opposite of
time.
chdelay Causes a delay after each character
sent.
delay= Followed immediately by a digit (no
space). Specifies the length of a
character or line delay. If 0, the
delay will always be until a
character is received.
delctls Causes transmission to stop when
control s is received from the
remote. Transmission will resume
when a control q is received.
lndelay Causes a delay after each line sent.
nochdly Turns off chdelay.
nodelctls Turns off delctls.
nolndly Turns off lndelay.
noprompt Turns off waiting for prompt after
each line.
nousectls Turns off usectls.
prompt= Followed immediately (no space) by a
character. After each line sent,
OTERM will wait until the specifed
character is received. A control
OTERM.DOC -- OTERM Terminal Simulator page 20
character may be specified as ^
followed by a character (e.g. ^@ for
NUL).
time Causes character and line delays to
last the specified time, regardless
of characters received from the
remote. The opposite of char.
usectls Informs OTERM that the remote
responds to control s to stop and
control q to restart. This should be
specified whenever possible to
prevent loss of data on disk
accesses.
Use of delays for file transmission can be a bit
tricky. Usually, a combination of line prompt and
short character delay (1 or 2) works well if the
remote provides a suitable prompt. In other cases
fairly long (4-7) time delays may be needed. With
half duplex systems, a line prompt or long (5-9)
time delays will be needed.
Some time sharing services (most using DEC
equipment) will send a control s to stop
transmission and a control q to restart. If delctls
is set, the transmission will work well, but the
display will probably be incoherrant if the remote
is sending during the transmission. If a proper
display is required, use a line prompt a character
delay also.
OTERM.DOC -- OTERM Terminal Simulator page 21
directory command.
The directory of any disk may be viewed with the
directory command. The only operand is the disk
drive letter. If omitted the default disk is used.
The directory is displayed in a window at the top of
the screen. If there are more files than will fit
in the window, the scrolling function keys (4, 5, 7,
and 8) may be used to view the entire directory.
The display is turned off with function key 6.
OTERM.DOC -- OTERM Terminal Simulator page 22
diskspace command.
The diskspace command may be used to display the
disk space used and remaining on any drive. The
only operand is the disk drive letter. If omitted,
the default disk is used.
OTERM.DOC -- OTERM Terminal Simulator page 23
erase command.
The erase command is used to delete a file from a
disk. It takes a single operand, the name of the
file to be deleted.
It is possible to delete a file which is being used,
such as the file being typed or read. The erase
command will be accepted, but actual deletion will
be defered until the file is closed.
If the file specified is the name of a temporary
file generated for output (for the log file
command), the erase command will be accepted, but
will be ineffective. Such files are of the form
TEMPnnnn.$$$, where nnnn are digits.
OTERM.DOC -- OTERM Terminal Simulator page 24
file command.
The file command is used to read a file as if it
were typed at the console. The file may contain
commands as an escape character followed by the
digit for the function key desired. The responses
to the prompts if any must follow in the file. All
responses to prompts must be terminated by a car-
riage return and line feed. An escape character may
be sent by entering two escape characters in the
file. This same technique is used to enter commands
from function keys. Control characters may be ent-
ered into the file, or may be specified as escape
followed by a character (e.g. esc @ for NUL).
Thus a file may contain either Osborne or extended
function key calls. Reading of a file terminates
any active function keys. If a file contains a
command to read another file, control will pass to
that file, but will not return at the end (files are
chained not nested).
Reading of a file may be temporarily halted by
entering function key 9 from the console. It may be
restarted with the file read command.
If this command is entered without operands, the
file status will be displayed.
The following operands are recognized:
Operand Function
----------- -------------------------------------
endfile Terminates reading of a file. The
file is closed.
halt Temporarily stops reading of a file.
The file may be restarted with the
read operand. This command is only
useful if entered from a file.
lf Allows transmission of line feeds
contained in the file. Note: this
also applies to function keys.
nolf Ignores line feeds contained in the
file. Note: this also applies to
function keys.
read Followed by the name of the file to
be read. This must be the last
operand on the line. If reading of a
file was halted with function key 9
or by a file halt command, the file
name may be * to continue the file.
OTERM.DOC -- OTERM Terminal Simulator page 25
fkhelp command.
Displays the standard OTERM function key usage.
OTERM.DOC -- OTERM Terminal Simulator page 26
line command.
Sets the logical line size to any length from 1
through 128. The only operand is the line size.
NOTE: The line size affects only the display. The
log and the transmission are not affected.
If entered without an operand, the current line size
will be displayed.
OTERM.DOC -- OTERM Terminal Simulator page 27
modem command.
Used to set the characteristics of the transmission.
If entered without operands, the current transmis-
sion status will be displayed.
The following operands are recognized:
Operand Function
----------- -------------------------------------
300 Sets 300 baud.
1200 Sets 1200 baud.
7bits Sets 7 bits transmitted.
8bits Sets 8 bits transmitted.
autolf Sets automatic transmission of line
feed after carriage return. This
option is usually required with host
mode.
even Sets even parity.
full Sets full duplex operation.
half Sets half duplex operation.
host Sets host mode. All characters
received are echoed back to the
remote. Use host mode when the
remote is a terminal (or a computer
acting as a terminal).
noautolf Turns off autolf
noparity Sets no parity transmitted.
odd Sets odd parity.
rs232 Sets operation through the rs232
connector. Because of hardware re-
strictions, this setting will send
data to both the rs232 connector and
the serial connector.
serial Sets operation through the serial
(modem) connector. Data is not sent
to the rs232 connector.
OTERM.DOC -- OTERM Terminal Simulator page 28
receive command and crcrecv command.
The receive command is used to receive a file with
the Ward Christensen modem protocol. This is
compatible with the various versions of modem
(single file transfers only), xmodem and yam.
The only operand is the name of the file to be
received (as it will appear on your system -- it
need not be the same as on the remote).
The crcrecv command is the same as the receive
command, but crc checking will be used. This is
superior to the standard checksum if the remote can
handle it.
The file transmission may be canceled with function
key 9. The other end is not notified of the
cancellation.
If the other system sends a cancel (control x) in
place of the normal block header, OTERM will inform
you of this. This can be useful when one end wishes
to halt a transmission. Don't cancel on the first
one though, it may just be a transmission error.
OTERM.DOC -- OTERM Terminal Simulator page 29
quit command.
This command returns to CP/M.
OTERM.DOC -- OTERM Terminal Simulator page 30
send command.
The send command is used to send a file with the
Ward Christensen modem protocol. This is compatible
with the various versions of modem (single file
transfers only), xmodem and yam.
The only operand is the name of the file to be sent
(as it appears on your system -- it need not be the
same as on the remote).
crc checking is implemented. In this protocol it is
requested by the receiver.
The file transmission may be canceled with function
key 9. The other end is not notified of the
cancellation.
If the other system sends a cancel (control x) in
place of the normal block header, OTERM will inform
you of this. This can be useful when one end wishes
to halt a transmission. Don't cancel on the first
one though, it may just be a transmission error.
OTERM.DOC -- OTERM Terminal Simulator page 31
type command
Used to display a file. A single operand, an
unambiguous file name, is accepted. The file is
displayed as a secondary display. The scrolling
function keys (4 and 5 only) are active.
The file must be a standard CP/M text file, except
that a file with lines terminated by carriage
return, but no line feed, will be displayed
properly.
OTERM.DOC -- OTERM Terminal Simulator page 32
wait command
This command delays transmission for from 1 through
60 seconds. This is sometimes useful in sending a
file without protocol to allow for some action by
the remote. The only operand is the number of
seconds to wait.
OTERM.DOC -- OTERM Terminal Simulator page 33
Protocol file transfers.
This section contains information on using OTERM to
send and receive files. The information on use of
other programs is, of course, not to be taken as
absolute. There are many different versions of
other programs which will communicate with OTERM and
details vary. When in doubt, check the
documentation of the other program. Most rcpm's
have help files or documentation files available.
To communicate with another system, one of the
systems must have an originate modem, the other an
answer modem (not necessarily auto answer -- the
term answer here refers only to the frequencies
used). Most moderately priced to expensive modems
can operate in either originate or answer mode.
Transfers from OTERM to OTERM
It is usually best to first establish communica-
tions. One of the systems is set to host mode and
auto line feed transmission (modem host autolf) and
the other to full duplex (modem full). It is then
possible to communicate through OTERM. Once commu-
nications have been established, the receiver enters
the crcrecv command and the sender enters the send
command. The transfer will then begin.
One may use the receive command, but the crcrecv
command gives greater assurance of correct transfer
at no measurable cost.
Transfers with other systems
The same method as for OTERM-OTERM transfers should
be used, if possible. Some programs, however, do
not allow establishing communications as a terminal
first. In that case, once the modems have esta-
blished carriers, enter the required commands. If
the other system allows crc checking, it should be
used.
Some programs are set up for automatic selection of
crc checking. If sending a file to such a program,
issue the send command to OTERM before the other
system issues the receive command.
OTERM.DOC -- OTERM Terminal Simulator page 34
Receiving from an rcpm.
Most rcpm's use the following method.
Type (to the rcpm, not as an OTERM command)
xmodem s <filename>
followed by return. <filename> is the name of the
file as it appears on the rcpm. The xmodem program
will type a message telling you that it can transfer
the file or that there is an error. Usually, if the
file can be transferred it will tell you the size
and the estimated transmission time. When the
message is complete, enter the OTERM command
crcrecv <filename>
where <filename> is the file name you wish to use.
Usually it should be the same as on the rcpm, except
that files with type .OBJ should be received with
type .COM. These are really COM files, but are put
on the rcpm with a different type so you will not be
able to run them. Usually, you cannot receive files
with type .COM on the rcpm.
A few systems do not support crc checking. In that
case, use the receive command.
Sending to an rcpm
This is similar to receiving. The command for the
rcpm is
xmodem rc <filename>
for sending with crc checking. If crc checking is
not available, the command is
xmodem r <filename>
The OTERM command is
send <filename>
Rcpm's will not accept files with a type of .COM.
Use the type .OBJ in the xmodem command (many
systems will automatically change it if you forget.)
Some systems will automatically put the file you
send to a special area. Others ask that you put it
in some special area yourself. A few don't care
where you put it.
OTERM.DOC -- OTERM Terminal Simulator page 35
Transferring files with CompuServe
Make sure cis protocol is on in OTERM (cis on).
You may generally leave it on. It will seldom do
any harm.
There are no OTERM commands directly associated with
CompuServe file transfers. You enter commands to
CompuServe, and the system sends the required
instructions to OTERM.
To send or receive a file from your user area, or
from another user area which is accessable to you,
enter the (CompuServe) command
r xftran
You will be prompted for details.
To receive a file from access, enter the
(CompuServe) command
dow <filename>
where <filename> is the name of the file you wish to
receive. Again, you will be prompted for details.
Display during transfers
During the transfer, OTERM displays the block being
sent or received and the number of retries. If a
retry is required, OTERM displays the reason.
Retries are made if either end discovers an error in
the transmission. If there are a great number of
retries required, the phone line is probably bad. A
few retries are no cause for concern. In some cases
transmission errors may cause the transmission to be
halted. OTERM will always inform you of this, and
if a file is being received will delete the file.
In this case, an old file of the same name will be
retained.
OTERM.DOC -- OTERM Terminal Simulator page 36
Common problems.
Protocol file transfers.
The most common problem in making protocol transfers
is failure to use a program in the remote which uses
a compatible protocol or using the wrong protocol.
OTERM can communicate with programs using the Ward
Christensen modem protocol, with or without crc
checking, or with programs using the CompuServe A
protocol.
Versions of modem (a terminal program) are available
for most CP/M systems at no cost. Some versions
(modem 7) also support a batch transmission protocol
for sending multiple files. This batch protocol is
not supported by OTERM.
The modem protocol is also supported by xmodem (used
by remote CP/M (rcpm) systems), by yam (available at
no charge from CompuServe CP/M Interest Group (CP-
MIG), or from many rcpm systems), and by a number of
commercial terminal programs.
The CompuServe A protocol is primarily useful for
uploading and downloading from CompuServe. This
protocol is controled by the remote (OTERM cannot
act as host for this protocol). Programs are avail-
able from CompuServe CP-MIG to allow CP/M systems to
act as host, but it usually will be better to use
the modem protocol.
Double spacing
Line feeds may be supplied by the remote or by OTERM
or may be supplied on the screen only. If more than
one source is supplying line feeds, the display will
be double spaced. For most time sharing systems or
bulletin boards, line feeds will be supplied by the
remote and OTERM should be set to
console noautolf
modem noautolf
file nolf
When communicating with a terminal (or a terminal
program) OTERM will usually have to supply line
feeds and should be set to
console noautolf
modem autolf
file nolf
In this case, OTERM will usually be in host mode.
OTERM.DOC -- OTERM Terminal Simulator page 37
Characters not displayed or
Characters displayed twice
In full duplex mode, characters typed are not shown
on the screen and must be echoed by the "host". In
half duplex mode, each side is responsible for
displaying characters it sends, but most time
sharing services and bulletin boards will supply
"free" line feed. When communicating with a
terminal, OTERM may act as the host.
OTERM and the remote must be in agreement with the
remote as to whether the transmission is full or
half duplex. Most bulletin boards operate only in
full duplex mode. Most time sharing systems may
operate in either full or half duplex mode. Full
duplex is generally best as the echo gives assurance
that characters were received properly. A notable
exception is that time sharing systems on IBM
mainframes usually operate in half duplex mode only.
If OTERM is in half duplex mode while the remote
thinks it is host to full duplex, anything you type
will be displayed twice. If OTERM is in full
duplex, while the remote thinks it is in half duplex
mode, nothing you type will be displayed. If both
OTERM and the remote are acting as hosts to full
duplex, a character will be repeated indefinitely.
Unable to establish communications.
This is usually due to incompatibility of the modems
being used (there are two incompatible "standards"
for 1200 baud modems. If you and the remote are
using different standards, you will get nowhere.) or
by incompatibility of the transmissions settings.
The two sides should be in agreement as to data rate
(OTERM supports 300 baud or 1200 baud), number of
stop bits, number of data bits, and parity. Most
systems will work with 8 data bits, 1 stop bit, no
parity.
Problems with nonprotocol file sending.
A good deal of playing around may be necessary to
get the transmission to work properly. If at all
possible, a line prompt should be used. In other
cases, it may be necessary to set the delay to time.
When all else fails, try long time delays (5-9).
The transmission will be painfully slow, but in most
cases this will work.
OTERM.DOC -- OTERM Terminal Simulator page 38
Remember that with nonprotocl transfers there is no
error checking. Line noise may garble a character
and the error will be undetected. Do not use
nonprotocol transfers if the other system supports
the modem or CIS protocol.
OTERM.DOC -- OTERM Terminal Simulator page 39
Browse.................................. 12
Characters displayed twice.............. 33
Characters not displayed................ 33
Cis command............................. 13
Clear command........................... 14
Commands................................ 5
Common problems......................... 33
CompuServe A protocol................... 13
Console command......................... 15
Control q............................... 5
Control s............................... 5
Crcrecv command......................... 25
Credits................................. 1
Delay command........................... 17
Description............................. 2
Directory command....................... 19
Diskspace command....................... 20
Display during transfers................ 32
Double spacing.......................... 33
Erase command........................... 21
Extended function keys.................. 8
File command............................ 22
File name............................... 9
Fkhelp command.......................... 6,22
Function key............................ 17
Function key 1.......................... 5, 9
Function key 6.......................... 12,19
Function key 9.......................... 9,13,22,25,27
Function Keys........................... 6, 6
Limitations............................. 3
Line command............................ 15,23
Log command............................. 10
Modem................................... 5
Modem command........................... 24
Modify OTERM............................ 9
New disk................................ 9
New features/corrections................ 4
OTERM Commands.......................... 9
Printer................................. 3
Problems with nonprotocol file sending.. 34
Protocol file transfers................. 30,33
Quit command............................ 26
Receive command......................... 25
Receiving from an rcpm.................. 31
Revision level.......................... 3
RS232 interface......................... 5
Scrolling function keys................. 12,19,28
Send command............................ 27
Sending a file.......................... 17
Sending to an rcpm...................... 31
Transferring files with CompuServe...... 31
Transfers from OTERM to OTERM........... 30
Transfers with other systems............ 30
Type command............................ 28
Unable to establish communications...... 34
OTERM.DOC -- OTERM Terminal Simulator page 40
Using OTERM (summary)................... 5
Using the log........................... 11
Wait command............................ 29