ftp.barnyard.co.uk/2015.02.ftp.barnyard.co.uk.tar/ftp.barnyard.co.uk/cpm/walnut-creek-CDROM/ENTERPRS/CPM/UTILS/A/BIOS-5.ARC/CXEQU.LIB

Text File | 1989-05-08 | 17KB | 623 lines

$*MACRO

false        equ    0
true        equ    not false
banked        equ    true
EXTSYS        equ    false    ; use external system as disk and char I/O
pre$release    equ    false

; start at Jan 1,1978     78  79  80  81  82  83  84
dt$hx$yr    equ    365+365+366+365+365+365+366
;    1985              1  2  3  4  5  6  7  8  9 10 11 12
date$hex    equ    dt$hx$yr+31+28+31+30+31+30+31+31+30+31+30+6

date    macro
    db    '6 Dec 85'
    endm

;
; boot memory map (bank 0 only)
;
bios02        equ    3000h    ;
block$buffer    equ    3400h    ; uses 2K
boot$parm    equ    3C00h    ; uses about 256 bytes
;
; bank 0 low memory map
;
ROM        equ    0000h
VIC$color    equ    1000h    ; I/O page only (IO$0 selected)
SYS$key$area    equ    1000h    ; 3 256 byte blocks (allow 4)
screen$40    equ    1400h    ; 2 X 80 X 25 = 4000
BANK$parm$blk    equ    2400h    ; allow 0.5K of parameters
BIOS8502    equ    2600h    ; 1.5K
VIC$screen    equ    2C00h    ; 1K
ccp$buffer    equ    3000h    ; 0c80h (allow 4K)
bank0$free    equ    4000h    ; start of free area in bank 0
;
; mapped I/O locations
;
VIC        equ    0D000h        ;
SID        equ    0D400h        ;
MMU        equ    0D500h        ;
DS8563        equ    0D600h        ; 8563
VIC$C$H        equ    0D800h        ; (memory mapped only in IO$0)
VIC$C$L        equ    01000h        ; (memory and i/o mapped in IO$0)
CIA1        equ    0DC00h        ; 6526
CIA2        equ    0DD00h        ; 6526
USART        equ    0DE00h        ; 6551 (extrn card)
RAM$dsk$base    equ    0DF00h        ; 8726

;
; Common memory allocation
;
int$block    equ    0FC00h    ; mode 2 interrupt pointers (to FDFDh)
parm$block    equ    0FD00h    ; system parameters
@buffer        equ    0FE00h    ; disk buffer (256 bytes)
;            0FF00h    ; to 0FFFFh used by 8502
;
; the following are C128 system equates
;
enable$z80    equ    0FFD0h        ; 8502 code
return$z80    equ    0FFDCh
enable$6502    equ    0FFE0h        ; Z80 code
return$6502    equ    0FFEEh

    page
                    ; 1st byte used as Intterrupt pointer
vic$cmd        equ    parm$block+1    ;; bios8502 command byte
vic$drv        equ    vic$cmd+1    ;  bios8502 drive (bit 0 set, drv 0)
vic$trk        equ    vic$drv+1    ;; bios8502 track #
vic$sect    equ    vic$trk+1    ;; bios8502 sector #
vic$count    equ    vic$sect+1    ;  bios8502 sector count
vic$data    equ    vic$count+1    ;; bios8502 data byte to/from
cur$drv        equ    vic$data+1    ;  current disk installed to Vir. drive
fast        equ    cur$drv+1    ;  bit 0 set, drv 0 is fast. ect.

key$tbl        equ    fast+1        ;; pointer to keyboard table
fun$tbl        equ    key$tbl+2    ;; pointer to function table
color$tbl$ptr    equ    fun$tbl+2    ;; pointer to logical color table
fun$offset    equ    color$tbl$ptr+2    ;; function # to be prepormed
sound$1        equ    fun$offset+1    ;; unused
sound$2        equ    sound$1+2    ;;
sound$3        equ    sound$2+2    ;;

@trk        equ    sound$3+2    ;; current track number
@dma        equ    @trk+2        ;; current DMA address
;
; below here not used by ROM
;
@sect        equ    @dma+2        ; current sector number
@cnt        equ    @sect+2        ; record count for multisector transfer
@cbnk        equ    @cnt+1        ; bank for processor operations
@dbnk        equ    @cbnk+1        ; bank for DMA operations
@adrv        equ    @dbnk+1        ; currently selected disk drive
@rdrv        equ    @adrv+1        ; controller relative disk drive
ccp$count    equ    @rdrv+1        ; number of records in the CCP
stat$enable    equ    ccp$count+1    ; status line enable
                    ;  7 kybrd, key codes(1), functions(0)
                    ;  6 40 column tracking on(0), off(1)
                    ;  0 disk stat, enable(1), disable(0)
emulation$adr    equ    stat$enable+1    ; address of current emulation
usart$adr    equ    emulation$adr+2    ; pointer to USART (6551) register
; CXIO equates
int$hl        equ    usart$adr+2    ; interrupt HL hold location
int$stack    equ    int$hl+2+20    ; currently only 5*2 used
user$hl$temp    equ    int$stack    ; user function HL hold location
hl$temp        equ    user$hl$temp+2    ; misc temp storage (used by VECTOR)
de$temp        equ    hl$temp+2    ; misc temp storage (used by VECTOR)
a$temp        equ    de$temp+2    ; misc temp storage (used by VECTOR)
source$bnk    equ    a$temp+1    ; inter bank move source bank #
dest$bnk    equ    source$bnk+1    ; inter bank move dest bank #
MFM$tbl$ptr    equ    dest$bnk+1    ; pointer to MFM table
; 1st release end
prt$conv$1    equ    MFM$tbl$ptr+2    ; not used any more
prt$conv$2    equ    prt$conv$1+2    ; ditto......
key$FX$function    equ    prt$conv$2+2
XxD$config    equ    key$FX$function+2
                    ; bit 7    0 = no parity    1 = parity
                    ; bit 6    0 = mark/space    1 = odd/even
                    ; bit 5    0 = space/even    1 = mark/odd

                    ; bit 1    0 = 1 stop bit    1 = 2 stop bits
                    ; bit 0    0 = 7 data bits    1 = 8 data bits

RS232$status    equ    XxD$config+1    ; bit 7, 1=send data, 0=no data
                    ; bit 6, 1=sending data
                    ; bit 5, 1=recv que active
                    ; bit 4, 1=parity error
                    ; bit 3, 1=framing error
                    ; bit 2, 1=recv over run (no used)
                    ; bit 1, 1=receiving data
                    ; bit 0, 1=Data byte ready

xmit$data    equ    RS232$status+1    ; data byte to send
recv$data    equ    xmit$data+1    ; received data byte

;
; The following equates are used by the interrupt driven keyboard handler
;
int$rate    equ    recv$data+1
;
;    1st byte is a pointer into table, 2nd to 12th byte represent
;    the keyboards current state (active low), NOTE: only
;    current if key$buffer is not full
;
key$scan$tbl    equ    int$rate+1
;
;    keyboard roll over buffer
;
key$buf$size    equ    8*2        ; must be an even number of bytes
key$get$ptr    equ    key$scan$tbl+12
key$put$ptr    equ    key$get$ptr+2
key$buffer    equ    key$put$ptr+2
;
;    software UART recv buffer
;
RxD$buf$size    equ    64
RxD$buf$count    equ    key$buffer+key$buf$size
RxD$buf$put    equ    RxD$buf$count+1
RxD$buf$get    equ    RxD$buf$put+1
RxD$buffer    equ    RxD$buf$get+1
tick$vol    equ    RxD$buffer+RxD$buf$size
;        equ    tick$vol+1

INT$vector    equ    0FDFDh        ;; contains a JMP int$handler
                    ; (in common)
    page
;===> 40 column misc parm
temp$1        equ    BANK$parm$blk    ;;
@off40        equ    temp$1+2    ;;
cur$offset    equ    @off40        ;;
old$offset    equ    @off40+2    ;;
prt$flg        equ    old$offset+1    ;;
flash$pos    equ    prt$flg+1    ;;
;
;===> 40 column position and color storage
paint$size    equ    flash$pos+2    ;;
char$adr$40    equ    paint$size+1    ;;
char$col$40    equ    char$adr$40+2    ;;
char$row$40    equ    char$col$40+1    ;;
attr$40        equ    char$row$40+1    ;;
bg$color$40    equ    attr$40+1    ;;
bd$color$40    equ    bg$color$40+1    ;;
rev$40        equ    bd$color$40+1    ;;
;
;===> 80 column position and color storage
char$adr    equ    rev$40+1    ;;
char$col    equ    char$adr+2    ;;
char$row    equ    char$col+1    ;;
current$atr    equ    char$row+1    ;;
bg$color$80    equ    current$atr+1    ;;
char$color$80    equ    bg$color$80+1    ;;
;    ROM uses localtions above this point
;
;===> Emulation parameters
parm$base    equ    char$color$80+1
parm$area$80    equ    parm$base+2
    ;    ds    2        ; 80 column exec$adr
    ;    ds    1        ; 80 column row #
parm$area$40    equ    parm$area$80+3
    ;    ds    2        ; 40 column exec$adr
    ;    ds    1        ; 40 column row #
buffer$80$col    equ    parm$area$40+3
;
;===> CXIO parameters
;    int$count not used by releases past 10 Oct 85
int$count    equ    buffer$80$col+40*2    ; one added every 1/60th sec
key$buf        equ    int$count+1
;
;===> CXKEYS parameters
key$down$tbl    equ    key$buf+1        ; not used any more (int code)
;;;;; free space above, new interrupt driven code does not require this space
; control$keys    equ    key$down$tbl+11*2 ; byte, not used any more (int code)

commodore$mode    equ    key$down$tbl+11*2
msgptr        equ    commodore$mode+1
offset        equ    msgptr+2
cur$pos        equ    offset+1
string$index    equ    cur$pos+1
; 1st release end (3 June 85)
sys$freq    equ    string$index+1        ; -1=50Hz, 0=60Hz
; 2nd release end (1 Aug 85)
;        equ    sys$freq+1
    page

;===> temp ROM boot data storage
blk$ptr$cnt    equ    32
load$count    equ    boot$parm    ; number of 128 byte blocks to load
ld$blk$ptr    equ    load$count+2    ; current sector dma pointer
blk$unld$ptr    equ    ld$blk$ptr+2    ; read memory block (1k,2K) pointer
block$size    equ    blk$unld$ptr+2    ; block size (1K=32 or 2K=64)
block$end    equ    block$size+1    ; allow 48K cpm.sys to load
block$ptrs    equ    block$end+2    ; end of block load buffer (+1K or +2K)
info$buffer    equ    block$ptrs+blk$ptr$cnt
                    ; CPM3.sys load adr's and counts
ext$num        equ    info$buffer+12    ; CPM3.SYS current ext #
retry        equ    ext$num+1
boot$stack    equ    retry+1+64    ; allow 64 bytes of stack
;        equ    boot$stack

;===> special equates used by CXKEY
special        equ    00010111b
SF$exit        equ    001h        ; RETURN KEY
SF$insert    equ    028h        ; PLUS KEY
SF$delete    equ    02Bh        ; MINUS KEY
alpha$toggle    equ    03Dh        ; commodore key
alt$key        equ    050h        ; alterant key
SF$left        equ    055h        ; left arrow key
lf$arrow    equ    055h        ; left arrow key
SF$right    equ    056h        ; right arrow key
rt$arrow    equ    056h        ; right arrow key


buff$large    equ    25
buff$small    equ    7
buff$pos    equ    7


    page
;===> External RS232 interface controls
rxd$6551    equ    USART+0        ; read
txd$6551    equ    USART+0        ; write
status$6551    equ    USART+1        ; read
reset$6551    equ    USART+1        ; write
command$6551    equ    USART+2        ; read/write
control$6551    equ    USART+3        ; read/write
txrdy        equ    10h
rxrdy        equ    08h
cmd$init    equ    0bh    ; no parity, enable txd + rxd, interrupts off
cntr$init$19200    equ    1Fh    ; 1 stop, 8 bits, 19200 baud
cntr$init$9600    equ    1Eh    ; 1 stop, 8 bits, 9600 baud (internal)
cntr$init$600    equ    017h    ; 600 baud

;===> memory management loactions
mmu$start    equ    MMU
conf$reg    equ    MMU        ; 3eh
conf$reg$1     equ    MMU+1        ; 3fh
conf$reg$2    equ    MMU+2        ; 7fh
conf$reg$3    equ    MMU+3        ; 3eh
conf$reg$4    equ    MMU+4        ; 7eh
mode$reg    equ    MMU+5        ; b1h
ram$reg        equ    MMU+6        ; 0bh 16K top Common
page$0$l    equ    MMU+7        ; 00h
page$0$h    equ    MMU+8        ; 01h
page$1$l    equ    MMU+9        ; 01h
page$1$h    equ    MMU+10        ; 01h
mmu$version    equ    MMU+11        ; ??h

enable$C64    equ    11110001b    ; FS=0
z80$off        equ    10110001b    ; value to be write to enable 8502
z80$on        equ    10110000b
fast$rd$en    equ    Z80$on+0    ; fast serial read
fast$wr$en    equ    Z80$on+8    ; fast serial write
common$4K    equ    09h        ; top  4K common
common$8K    equ    0ah        ; top  8K common
common$16K    equ    0bh        ; top 16K common

;===> preconfiguration maps
force$map    equ    0ff00h
bank$0        equ    0ff01h        ; 3fh
bank$1        equ    0ff02h        ; 7fh
io        equ    0ff03h        ; 3eh
io$0        equ    0ff03h        ; 3eh
io$1        equ    0ff04h        ; 7eh

    page
;===> 80 column display equates
DS$index$reg    equ    DS8563
DS$status$reg    equ    DS8563
DS$data$reg    equ    DS8563+1
;===> register pointers
DS$cursor$high    equ    14
DS$cursor$low    equ    15
DS$rw$ptr$high    equ    18
DS$rw$ptr$low    equ    19
DS$rw$data    equ    31
DS$color    equ    26
;===> status bits
DS$ready    equ    80h
DS$lt$pen    equ    40h
;===> display memory layout  (16K) 0-3fffh
DS$screen    equ    0000h
DS$attribute    equ    0800h
DS$char$def    equ    2000h
;
;===> VIC equates
; vic colors
black        equ    0
white        equ    1
red        equ    2
cyan        equ    3
purple        equ    4
green        equ    5
blue        equ    6
yellow        equ    7
orange        equ    8
brown        equ    9
lt$red        equ    10
dark$grey    equ    11
med$gray    equ    12
lt$green    equ    13
lt$blue        equ    14
lt$grey        equ    15

    page

RM$status    equ    RAM$dsk$base    ;read only register
;   bit 7    Interrupt pending if 1
;    6    Transfer complete if 1
;    5    Block verify error if 1
;   note:  bits 5-7 are cleared when read
;    4    128K if 0,  512K if 1
;    3-0    Version #
;
RM$command    equ    RAM$dsk$base+1    ;r/w
;   bit    7    execute per current config. if set
;    6    reserved
;    5    enable auto reload if set (restores all register to
;            value before command was done, else point to
;            next byte to read/write.)
;    4    disable FF00 decode if set (do operation after command writen)
;    3,2    reserved
;    1,0    00 = transfer C128 --> Ram Disk
;        01 = Transfer C128 <-- Ram Disk
;        10 = swap     C128 <-> Ram Disk
;        11 = Verify   C128  =  Ram Disk
;
RM$128$low    equ    RAM$dsk$base+2    ;r/w
;    bits 0 to 7 of C128 address
;
RM$128$mid    equ    RAM$dsk$base+3    ;r/w
;    bits 8 to 15 of the C128 address
;
RM$ext$low    equ    RAM$dsk$base+4    ;r/w
;    bits 0 to 7 of Ram Disk address
;
RM$ext$mid    equ    RAM$dsk$base+5    ;r/w
;    bits 8 to 15 of Ram Disk address
;
RM$ext$hi    equ    RAM$dsk$base+6    ;r/w
;    bit  16       of Ram Disk address if 128K version
;    bits 16 to 18 of Ram Disk address if 512K version
;
RM$count$low    equ    RAM$dsk$base+7    ;r/w
;    low byte transfer count (bits 0-7)
;
RM$count$hi    equ    RAM$dsk$base+8    ;r/w
;    hi byte transfer count  (bits 8-15)
;
RM$intr$mask    equ    RAM$dsk$base+9    ;r/w
;   bit    7    1=enable chip interrupts
;    6    1=enable end of block interrupts
;    5    1=enable verify error interrupts
;
RM$control    equ    RAM$dsk$base+10    ;r/w
;   bit    7,6        00    Increment both addresses  (default)
;        01    Fix expansion address
;        10    Fix C128 address
;        11    Fix both addresses
;

    page
;===> CIA equates

Data$a        equ    00h
Data$b        equ    01h
Data$dir$a    equ    02h
Data$dir$b    equ    03h
timer$a$low    equ    04h
timer$a$high    equ    05h
timer$b$low    equ    06h
timer$b$high    equ    07h
tod$sec$60    equ    08h
tod$sec        equ    09h
tod$min        equ    0ah
tod$hrs        equ    0bh
sync$data    equ    0ch
int$ctrl    equ    0dh
cia$ctrl$a    equ    0eh
cia$ctrl$b    equ    0fh
CIA$hours    equ    CIA1+tod$hrs

key$row        equ    CIA1+Data$a    ; output
key$col        equ    CIA1+Data$b    ; input
VIC$key$row    equ    0d02fh        ; output


data$hi        equ    4        ; RS232 data line HI
data$low    equ    0        ; RS232 data line LOW

lf$shift$key    equ    80h
rt$shift$key    equ    10h
commodore$key    equ    20h
control$key    equ    04h

type$lower    equ    0
type$upper    equ    1
type$shift    equ    2
type$cntrl    equ    3
type$field    equ    00000011b

    page

bnk1    equ    1
page0    equ    0
page1    equ    1

MMU$tbl$M    macro
    db    3fh,3fh,7fh,3eh,7eh        ; config reg's
    db    z80$on,common$8K        ; mode & mem
    db    page0,bnk1,page1,bnk1        ; page reg's
    endm

    page
;
;    ROM functions
;
TJMP    macro    x
    rst 2 ! db x
    endm

TCALL    macro    x
    mvi l,x ! rst 4
    endm

RJMP    macro    x
    rst 3 ! db x
    endm

RCALL    macro    x
    mvi l,x ! rst 5
    endm

FR$40            equ    2    ; offset to 40 column ROM functions

FR$wr$char        equ    00h    ; D=char auto advance
FR$cursor$pos        equ    04h    ; B=row, C=column
FR$cursor$up        equ    08h
FR$cursor$down        equ    0Ch
FR$cursor$left        equ    10h
FR$cursor$rt        equ    14h
FR$do$cr        equ    18h
FR$CEL            equ    1Ch
FR$CES            equ    20h
FR$char$ins        equ    24h
FR$char$del        equ    28h
FR$line$ins        equ    2Ch
FR$line$del        equ    30h
FR$color        equ    34h    ; B=color
FR$attr            equ    38h    ; B=bit to set/clear, C=bit value
FR$rd$chr$atr        equ    3Ch    ; in  D=row, E=col
                    ; out H=row, L=col, B=char, C=attr(real)
FR$wr$chr$atr        equ    40h    ; in  D=row, E=col, B=char, C=attr(real)
                    ; out H=row, L=col
FR$rd$color        equ    44h
;FR$wr$color        equ    48h
;            equ    4Ch

    page
;
FR$trk$sect        equ    50h
FR$check$CBM        equ    52h
FR$bell            equ    54h
;            equ    56h
;            equ    58h
;            equ    5Ah
;            equ    5Ch
;            equ    5Eh

FR$trk$40        equ    60h
FR$set$cur$40        equ    62h
FR$line$paint        equ    64h
FR$screen$paint        equ    66h
FR$prt$msg$both        equ    68h
FR$prt$de$both        equ    6Ah
FR$update$it        equ    6Ch
;            equ    6Eh

FR$ASCII$to$pet        equ    70h
FR$cur$adr$40        equ    72h
FR$cur$adr$80        equ    74h
FR$look$color        equ    76h
;            equ    78h
FR$blk$fill        equ    7Ah    ; HL passed on the stack
FR$blk$move        equ    7Ch    ; "
FR$char$inst        equ    7Eh    ; "

;
;    fixed ROM locations
;
R$cmp$hl$de        equ    100h-6
R$write$memory        equ    180h+0
R$read$memory        equ    180h+3
R$set$update$adr    equ    180h+6
R$wait            equ    180h+9

R$status$color$tbl    equ    1000h-246-16
R$color$convert$tbl    equ    1000h-230-16

    page
;
;    Disk type byte definition
;
;    bit    7    0=GCR,  1=MFM
;
;        if bit 7 is 1 (MFM)
;        6    C0=0,    C1=1    (side 2 #, 0 to (n/2)-1 or n/2 to n-1)
;        5,4    00=128, 01=256, 10=512, 11=1024  byte/sector
;        3,2,1    disk type (MFM)
;        0    starting sector # ( 0 or 1)
;
;        if bit 7 is 0 (GCR)
;        6    unused (set to 0)
;        5,4    always 01  (256 byte sectors)
;        3,2,1    disk type (GCR)
;            Type0 = none,  set track and sector as passed
;            Type1 = C64  type disk
;            Type2 = C128 type disk
;        0    unused (set to 0)

MFM    equ    1*128
C0    equ    0*64        ; 2nd side start at begining
C1    equ    1*64        ; 2nd side continues from first
C1$bit    equ    6

Type0    equ    0*2        ; (MFM)    top, bottom then next track
                ;     (TRK# 0 to (34 or 39))
Type1    equ    1*2        ; (MFM)    top (trk 0 even), bottom (trk 1 odd)
                ;     (TRK# 0 to (69 or 79))
Type2    equ    2*2        ; (MFM)    top TRK# 0 to 39, bottom TRK# 40 to 79
                ;     (TRK# on back start at 39 and go to 0)
Type7    equ    7*2        ; (MFM) pass the byte values supplied in @trk
                ;    and @sect

TypeX    equ    7*2

S0    equ    0*1        ; start at sector 0
S1    equ    1*1        ; start at sector 1

S128    equ    0*16
S256    equ    1*16
S512    equ    2*16
S1024    equ    3*16

;
dsk$none    equ    Type0+S256    ; access to any sector on the disk
dsk$c64        equ    Type1+S256
dsk$c128    equ    Type2+S256

dir$track    equ    18        ; C64 disk dir track

    page
;
;    6510 commands
;
vic$reset    equ    -1    ; reboot C128
vic$init    equ    0    ; initilize the bios8502
vic$rd        equ    1    ; read one sector of data (256 bytes)
vic$wr        equ    2    ; write one sector of data
vic$rdF        equ    3    ; set-up for fast read (many sectors)
vic$wrF        equ    4    ; set-up for fast write
vic$test    equ    5    ; test current disk in drive
vic$query    equ    6    ; get start sectors and #sector/trk
vic$prt        equ    7    ; print data character
vic$frmt    equ    8    ; format a disk (1541)
vic$user$fun    equ    9
vic$RM$rd    equ    10    ; RAM disk read
vic$RM$wr    equ    11    ; RAM disk write

;
;    control charactors
;
eom        equ    00h
bell        equ    07h
bs        equ    08h
lf        equ    0ah
cr        equ    0dh
xon        equ    11h
xoff        equ    13h
esc        equ    1bh

harac