home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
old
/
ckermit70
/
ckuker.mak
< prev
next >
Wrap
Text File
|
2020-01-01
|
276KB
|
6,303 lines
# makefile / Makefile / ckuker.mak / CKUKER.MAK
#
# Tue Feb 8 17:07:23 2000
BUILDID=20000208
#
CKVER= "7.0.197"
#
# -- Makefile to build C-Kermit for UNIX and UNIX-like systems --
#
# Copyright (C) 1985, 2000,
# Trustees of Columbia University in the City of New York.
# All rights reserved. See the C-Kermit COPYING.TXT file or the
# copyright text in the ckcmai.c module for disclaimer and permissions.
#
# Author: Frank da Cruz, Columbia University
# 612 West 115th Street, New York NY 10025-7799, USA
# E-mail: fdc@columbia.edu
# Fax: +1 212 662-6442
# Web: http://www.columbia.edu/kermit/
#
# Contributions from many others. Special thanks to Peter Eichhorn,
# assyst GmbH, for the consolidated HP-UX entries, to Robert Lipe for
# the updated & consolidated SCO UNIX / ODT / OSR5 entries, to Ric Anderson
# for new IRIX 6.x entires, and Jeff Altman for the Kerberos/SRP targets.
#
# Most entries use the "xermit" target, which uses the select()-based CONNECT
# module, ckucns.c. The "wermit" target uses the older fork()-base CONNECT
# module, ckucon.c, which has some drawbacks (but is more portable). If your
# entry still uses the "wermit" target, please try substituting the "xermit"
# one and if it works, let us know.
#
# CAREFUL: Don't put the lowercase word "if", "define", or "end" as the first
# word after the "#" comment introducer in the makefile, even if it is
# separated by whitespace. Some versions of "make" understand these as
# directives. Uppercase letters remove the danger, e.g. "# If you have..."
#
# WARNING: This is a huge makefile, and it contains nested makes.
# Some "make" programs run out of memory. If this happens to you, edit
# away the parts that do not apply to your system and try again.
#
# Certain UNIX variations have their own separate makefiles:
# . For 2.10 or 2.11 BSD on DEC PDP-11s, use ckubs2.mak.
# . For Plan 9, use ckpker.mk.
#
# Separate build procedures are provided non-UNIX platforms: VMS, VOS,
# AOS/VS, etc. See the ckaaaa.txt file for details.
#
#
# DIRECTIONS
#
# Rename this file to "makefile" or "Makefile" if necessary. Pick out the
# entry most appropriate for your UNIX system from the list below and then
# give the appropriate "make" command, for example "make aix43", "make sys5r4",
# "make linux". If you experience any difficulties with the build procedure,
# then please also read any comments that accompany the make entry itself
# (search for the make entry name on the left margin).
#
# Other entries:
# 'make manpage' creates the nroff man page file from ckuker.cpp.
# 'make install' is a SAMPLE installation script.
# 'make clean' removes intermediate and object files.
#
# IMPORTANT:
# For more detailed installation instructions, read the files ckuins.txt
# and ckccfg.txt. For descriptions of known problems and limitations,
# read the files ckcbwr.txt and ckubwr.txt (the "beware files").
#
# Most entries build C-Kermit with its symbol table included. To reduce the
# size of the executable program, add "LNKFLAGS=-s" to the end of your 'make'
# command or to the makefile entry, or 'strip' the executable after
# building. To further reduce the size after building, use 'mcs -d' if your
# system has such a command. For further details on size reduction, read
# ckccfg.txt to find out how to remove features that you don't need.
#
# TCP/IP networking support: If your C-Kermit version does not include TCP/IP
# networking, but your UNIX system does, try adding -DTCPSOCKET to the CFLAGS
# of your makefile entry. If that doesn't work, look at some of the other
# entries that include this flag for ideas about what libraries might need to
# be included, etc. NOTE: In some cases (old versions of SCO or HP-UX), you
# might need not only a C compiler, but also a "TCP/IP developers kit" for the
# required object libraries and header files.
#
# Fullscreen file transfer display support: If you are going to use C-Kermit
# for establishing connections (dialed, network, etc), you can configure it to
# produce a formatted file transfer display by including the curses library
# and adding -DCK_CURSES to the CFLAGS for your option, and linking with the
# appropriate libraries. There are many examples below, usually ending in
# "c", like sunos41c. Also add -DCK_WREFRESH if your curses library includes
# clearok() and wrefresh() functions (or remove -DNOWREFRESH if the linker
# complains that it can't find these functions). After building, you still
# have to SET FILE DISPLAY FULLSCREEN to get the formatted screen display.
#
# Please report modifications, failures (preferably with fixes) or successes
# to the author.
#
# TARGETS FOR DIFFERENT UNIX PLATFORMS AND VERSIONS:
#
# + Marks those that have been tested successfully in the current version.
# - Marks those that are known not to work in the current version.
# ? Marks those that worked in a previous version but have not been tested
# in the current version.
# --------------------------
# ? for 386BSD (Jolix) 0.0, 0.1, "make 386bsd" (see comments in entry),
# or (preferably, if it works) "make bsd44" or "make bsd44c".
# ? for Acorn RISCiX, "make riscix" or "make riscixgcc"
# ? for Alliant FX/8 with Concentrix 4.1 or later, "make bsdlck"
# ? for Altos 486, 586, 986 with Xenix 3.0, "make altos"
# ? for Altos ACS68000, 8Mhz 68000, UNIX System 3 Rel 2, 512K, "make altos3"
# ? for Amdahl UTS 2.4 on IBM 370 series & compatible mainframes, "make uts24"
# ? for Amdahl UTSV IBM 370 series & compatible mainframes, "make utsv"
# ? for Amdahl UTSV IBM 370 series mainframes with TCP/IP, "make utsvtcp"
# ? for Amdahl mainframes with UNIX System V R 5.2.6b 580, "make sys3"
# ? for Apollo Aegis 9.x, DOMAIN/IX 9.x, "make aegis"
# (Last tested in C-Kermit 5A(189))
# ? for Apollo DOMAIN/IX, if the above fails, try "make apollobsd"
# ? for Apollo with SR10.0 or later, BSD environment, "make sr10-bsd"
# ? for Apollo with SR10.0 or later, System V environment, "make sr10-s5r3"
# ? for Apple Macintosh II with A/UX pre-3.0, "make aux", "auxgcc" or "auxufs"
# ? for Apple Macintosh with A/UX 3.0 and gcc, "make aux3gcc" or aux3gccc
# + for Apple PowerMac with MkLinux, "make mklinux" (read Linux entry first)
# + for Apple PowerMac with LinuxPPC, "make linuxppc"
# ? for Apple Macintosh with Minix 1.5.10, "make minix68k" or "make minixc68"
# + for Apple Macintosh with Mac OS X 1.0 (Rhapsody), "make macosx10"
# (no curses), "make macosx10c" (curses), or "make macosx10nc" (ncurses).
# Or "make macosx10ncx" (ncurses but "make macosx10nc" doesn't work).
# ? for Arix System 90 with AT&T SVR3, "make sys5r3na"
# ? for AT&T 6300 with IN/ix, "make sys5"
# ? for AT&T 6300 PLUS, "make att6300" or (with no debugging) "make att6300nd"
# ? for AT&T 6386 WGS UNIX PC, "make sys5r3"
# + for AT&T 3B2, 3B20 systems, "make att3b2".
# for AT&T 3B1, 7300 UNIX PC (see notes with the entries):
# In C-Kermit 7.0, only the gcc entries work:
# + "make sys3upcg", "make sys3upcgc", "make sys3upcgcm", "make att351gm"
# The others fail with "too many defines" (usually in ckuusr.h):
# - "make sys3upc", "make sys3upcold", "make sys3upcc", "make sys3upcx",
# "make sys3upcm", "make att351m"
# ? for AT&T System III/System V R2 or earlier, "make sys3" or "make sys3nid"
# ? for AT&T System III/System V with Honey DanBer UUCP, "make sys3hdb"
# ? for AT&T System V on DEC VAX, "make sys3" or "make sys5r3"
# + for AT&T System V R3, use "make sys5r3" or "make sys5r3c"
# + for AT&T System V/386 R320.0 Versyss Systems, use "make sys5r3"
# or "make sys5r3c" with KFLAGS=-DNONAWS.
# + for AT&T System V R4, "make sys5r4", "make sys5r4sx", or "make sys5r4nx",
# or if the ANSI C function prototyping makes trouble, add -DNOANSI,
# as in "sys5r4sxna" entry
# + for AT&T System V R4 with bundled TCP/IP, "make sys5r4netc", ...
# + for AT&T System V R4 with Wollongong TCP/IP, "make sys5r4twg", ...
# + for AT&T (USL) System V R4.2 use the sys5r4* entries.
# ? for Atari Falcon with MiNT, "make posix"
# ? for Atari ST with Minix ST 1.5.10.3, "make minix68k" or "make minixc68"
# ? for BBN C/70 with IOS 2.0, "make c70"
# ? for BeBox with Be OS 1.x DR7, "make beboxdr7"
# Compiles OK but doesn't link with default linker which is limited to 64K.
# Links OK with "Code Warrior Gold". Many hacks in the source code need
# to be removed when DR8 and later come out.
# (Last tested in C-Kermit 6.0)
# - for BeBox with Be OS 1.x DR8, "make bebox"
# (Needed functions missing from operating system and/or not working.)
# - for Bell Labs UNIX Version 6 (6th Edition), there is no makefile entry.
# ? for Bell Labs UNIX Version 7 (7th Edition), "make v7" (but see notes below)
# (last built successfully in C-Kermit 5A188)
# ? for Bell Labs Research UNIX Version 10, "make bellv10"
# (last built successfully in C-Kermit 6.0)
# + for Bell Labs / Lucent Plan 9, use separate makefile ckpker.mk:
# can be built for Intel, MIPS, 680x0, and PowerPC.
# + for BSDI BSD/386 1.x, "make bsdi"
# + for BSDI BSD/OS 2.x, "make bsdi2"
# + for BSDI BSD/OS 3.0 or 3.1, "make bsdi3"
# + for BSDI BSD/OS 4.0, "make bsdi4"
# ? for Berkeley Unix 2.4, "make v7" (but read v7 material below)
# ? for Berkeley Unix 2.9 (DEC PDP-11 or Pro-3xx), "make bsd29"
# - for Berkeley Unix 2.10, use ckubs2.mak (a separate makefile)
# - for Berkeley Unix 2.11, use ckubs2.mak (a separate makefile)
# This makefile is too big. Read the instructions in ckubs2.mak.
# "make -f ckubs2.mak bsd210" or "make - f ckubs2.mak bsd211".
# (last built successfully in C-Kermit 6.0 - later versions too big)
# + for Berkeley Unix 2.11 "make -f ckubs2.mak bsd210noicp" (no command parser)
# ? for Berkeley Unix 4.1, "make bsd41"
# + for Berkeley Unix 4.2 on VAX, "make bsd42" or "make bsd42c"
# ? for Berkeley Unix 4.2 or 4.3 with HoneyDanBer UUCP, "make bsdhdb"
# + for Berkeley Unix 4.3 on VAX, "make bsd43" or "make bsd43c"
# + for Berkeley Unix 4.3 without acucntrl program, "make bsd42" or "bsd42c"
# NOTE: all the C-Kermit 7.0 full builds for old BSDs fail with
# "too many defines" in CPP, even on big architectures like VAX. This
# can be worked around with a clever ruse. See comments at target.
# + for Berkeley Unix 4.3, command-line only, "make bsdm".
# + for Berkeley Unix 4.3-Tahoe, same as 4.3 BSD
# + for Berkeley Unix 4.3-Reno, "make bsd43" or "make bsd44" or "make bsd44c"
# + for Berkeley Unix 4.3-Carson City, "make bsd44" or "make bsd44c"
# + for Berkeley Unix 4.4-Networking/2 or -Alpha, "make bsd44" or "make bsd44c"
# + for Berkeley Unix 4.4, "make bsd44" or "make bsd44c"
# + for Berkeley Unix 4.4-Lite, "make bsd44" or "make bsd44c"
# ? for Bull DPX/2 with BOS/X, "make bulldpx2"
# ? for Cadmus, "make sys3"
# ? for Callan Unistar, "make sys3"
# ? for CDC VX/VE 5.2.1 System V emulation, "make vxve"
# ? for Charles River Data Systems Universe 680x0 with UNOS 9.2, maybe
# also other UNOS versions, "make crds"
# ? for CIE Systems 680/20 with Regulus, "make cie"
# + for Commodore Amiga 3000UX Sys V R4, "make sys5r4sx"
# + for Commodore Amiga 3000UX Sys V R4 and TCP/IP, "make svr4amiganet"
# ? for Commodore Amiga with Minix 1.5.10, "make minix68k" of "make minixc68"
# ? for Concurrent/Masscomp with RTU 4.0 or later, BSD environment, "make
# rtubsd", "make rtubsd2", "make rtubsd3" (depending on where ndir.h
# is stored, see entries below).
# ? for Concurrent/Masscomp with RTU 4.0 or later, System V R2, "make rtus5"
# ? for Concurrent/Masscomp with RTU 5.0 or later, System V R3, "make rtusvr3"
# ? for Concurrent (Perkin-Elmer) 3200 series, "make sys5".
# ? for Concurrent (Perkin-Elmer) 3200 series with <dirent.h>, "make ccop1"
# ? for Consensys UNIX SV/386 R4V3, "make sys5r4sxtcpc" or "make sys5r4sx"
# ? for Convergent with CTIX Sys V R2, "make sys5"
# ? for Convergent with CTIX 6.4.1, "make ctix"
# ? for Convex C1, "make convex"
# ? for Convex C210 with Convex/OS 8, "make convex8"
# ? for Convex C2 with Convex/OS 9.1, "make convex9"
# ? for Convex C2 with Convex/OS 10.1 and gcc 2.x, "make convex10gcc"
# ? for Cray Research X/MP or YMP or C90 with UNICOS 6.x (System V R3),
# "make cray"
# ? for Cray Research X/MP or YMP or C90 with UNICOS 7.x (System V R4),
# "make cray"
# ? for Cray Research X/MP or YMP or C90 with UNICOS 8.0 Alpha, "make cray8"
# ? for Cray Computer Cray-2 or Cray3 with CSOS, "make craycsos"
# ? for Cyber 910 (Silicon-Graphics Iris) with Irix 3.3, "irix33"
# ? for Data General AViiON with DG/UX 5.4R3.xx or later, "make dgux543c"
# ? for Data General AViiON with DG/UX 5.4 before R3.00, "make dgux540"
# or "make dgux540c" (compile ckwart separately if necessary)
# + for DG/UX 5.4 on AViiON Intel models, "make dgux540i" or dgux540ic.
# ? for DG/UX 5.4R4.11 on AViiON, all models, "make dgux54411"
# + for DG/UX 5.4R4.20 on AViiON, all models, "make dgux54420"
# + for Data General AViiON with DG/UX 4.3x using Sys V-isms, "make dgux430"
# ? for Data General AViiON with DG/UX 4.3x using BSD-isms, "make dgux430bsd"
# ? for Data General AViiON, earlier UNIX versions,
# "make sys5r3" (maybe compile ckwart separately, or "touch ckcpro.c")
# ? for Data General MV systems with DG/UX, ???
# ? for Data General MV systems with MV/UX, use AOS/VS C-Kermit (CKDKER.MAK)
# + for Data General MV systems with AOS/VS, use CKDKER.MAK.
# for DEC PDP-11 with Berkeley UNIX 2.x, see Berkeley UNIX 2.x.
# ? for DEC PDP-11 with Mini-UNIX (Bell 6th Edition for PDP-11 with no MMU),
# probably no way to fit C-Kermit without I&D space.
# ? for DEC PDP-11 with Ultrix-11 3.x, ??? (probably needs overlays)
# ? for DEC VAX with Ultrix 1.x "make bsd"
# ? for DEC VAX with Ultrix 2.x "make ultrix2s"
# ? for DEC VAX or DECstation with Ultrix 3.0, 3.1, "make ultrix3x"
# ? for DECstation or VAX with Ultrix 4.0 or 4.1, "make ultrix40"
# ? for DECstation or VAX with Ultrix 4.2, "make ultrix42" or "make ultrix42c"
# ? for DECstation or VAX with Ultrix 4.2, Sys V R4 world, "make du42s5r4"
# ? for DECstation or VAX with Ultrix 4.x, POSIX world, "make posix"
# + for DECstation or VAX with Ultrix 4.3, "make ultrix43".
# + for DECstation or VAX with Ultrix 4.4, "make ultrix44".
# ? for DECstation 5000/50, /150 or /260 (R4x00 MIPS CPU), Ultrix 4.3A or later
# "make ultrix43-mips3" or "make ultrix43c-mips3"
# ? for DECstation (MIPS) with Berkeley Sprite, "make bsd44"?
# ? for DECstation (MIPS) with OSF/1 V1.0 to 1.3, "make dec-osf"
# ? for DEC Alpha with OSF/1 1.0 to 1.3, "make dec-osf"
# ? for DEC PC 486 with OSF/1, "make dec-osf"
# ? for DEC Alpha with OSF/1 2.x, "make dec-osf20"
# + for DEC Alpha with OSF/1 3.0, "make dec-osf30"
# + for DEC Alpha with Digital UNIX 3.2, "make du32"
# + for DEC Alpha with Digital UNIX 4.0, "make du40" or "make du40gcc"
# + for DEC Alpha with Digital UNIX 5.0, "make du50"
# - for DEC Pro-350 with Pro/Venix V1.x, "make provx1" (version 5A is too big)
# ? for DEC Pro-380 with Pro/Venix V2.0 (Sys V), "make sys3" or "make sys3nid"
# ? for DEC Pro-380 with 2.9, 2.10, or 2.11 BSD, "make bsd29" or "make bsd210"
# for DEC PDP-11 with 2.xBSD (use separate makefile ckubs2.mak)
# ? for Dell UNIX Issue 2.x (= USL Sys V/386 R4.x + fixes), "make dellsys5r4"
# or "make dellsys5r4c" (last tested in C-Kermit 5A).
# ? for DIAB DS90 with DNIX (any version) create an empty <sys/file.h> if
# this file does not already exist (or add -DNOFILEH to the make entry).
# ? for DIAB DS90 or LUXOR ABC-9000 with pre-5.2 DNIX, add "getcwd" to libc.a
# (see ckuins.txt), then "make dnixold".
# ? for DIAB DS90 with DNIX 5.2 (Sys V.2) or earlier, "make dnix",
# "make dnixnd", or (to add curses and TCP/IP) "make dnixnetc",
# ? for DIAB DS90 with DNIX 5.3 (Sys V.3), "make dnix5r3"
# ? for DIAB DS90 with DNIX 5.3 (Sys V.3) and TCP/IP, "make dnix5r3net"
# ? for DIAB DS90 with DNIX 5.3 2.2 (Sys V.3), ANSI C, "make dnix5r3ansi"
# or, to include TCP/IP, "make dnix5r3ansinet",
# but you have to fix a bug in /usr/include/stdlib.h first:
# change "extern void free(char *str);" to "extern void free(void *str);"
# ? for Dolphin Server Technology Triton 88/17 with SV/88 R3.2, "make sv88r32"
# ? for Encore Multimax 310, 510 with Umax 4.2, "make umax42"
# ? for Encore Multimax 310, 510 with Umax 4.3, "make umax43"
# ? for Encore Multimax 310, 510 with Umax V 2.2, use Berkeley cc, "make bsd"
# ? for Encore 88K with Umax V 5.2, "make encore88k"
# ? for ESIX System V R4.0.3 or 4.04 with TCP/IP support, "make esixr4"
# NOTE: You can also build on Unixware 2.x with "make esixr4", and run
# on ESIX, but there you must first:
# ln /usr/lib/libsocket.so /usr/lib/libsocket.so.1
# ln /usr/lib/libnsl.so /usr/lib/libnsl.so.1
# (This worked for C-Kermit 6.0 but does not work for 7.0)
# ? for Everex STEP 386/25 Rev G with ESIX Sys V R3.2D, "make sys5r3"
# ? for Fortune 32:16, For:Pro 1.8, "make ft18"
# ? for Fortune 32:16, For:Pro 2.1, "make ft21"
# ? for FPS 500 with FPX 4.1, "made bsd"
# ? for FreeBSD 1.0, "make freebsd"
# + for FreeBSD 2.x, "make freebsd2" (ncurses) or "make freebsd2c" (curses)
# + for FreeBSD 3.x, "make freebsd3" (ncurses) or "make freebsd3c" (curses)
# ? for Harris HCX-2900, "make sys5r3"
# ? for Harris Night Hawk 88K or 68K with CX/UX pre-6.1, "make sys5r3"
# ? for Harris Night Hawk 88K or 68K with CX/UX 6.1 or later, "make cx_ux"
# ? for Heurikon, "make sys3"
# ? for HP-3000, MPE/ix, "make posix"?
# + for HP-9000 Series 300 with 4.4BSD, "make bsd44"
# + for HP-9000 Series 500, HP-UX 5.21 with WIN/TCP 1.2 "make hpux500wintcp"
# + for HP-9000 Series, HP-UX < 6.5, without long filenames, no job control,
# "make hpuxpre65"
# + for HP-9000 Series, HP-UX pre-7.0, without long filenames, "make hpux"
# + for HP-9000 Series, HP-UX 6.5, without long filenames,
# "make hpux65" or "make hpux65c"
# + for HP-9000 Series, HP-UX 7.0 or later, no long filenames, "make hpux70sf"
# or (to include tcp/ip, curses, etc) "make hpux70sftcpc"
# + for HP-9000 Series with HP-UX Sys V R2, BSD long names, "make hpuxlf"
# + for HP-9000 Series with HP-UX Sys V R2, dirent long names, "make hpuxde"
# or (to include TCP/IP support) "make hpuxdetcp"
# + for HP-9000 Series with HP-UX Sys V R3, "make hpuxs5r3"
# + for HP-9000 Series with HP-UX 7.0, TCP/IP, long filenames, "make hpux70lfn"
# + for HP-9000 300/400 Series (680x0) with HP-UX 8.0, TCP/IP, "make hpux80"
# or "make hpux80c"
# + for HP-9000 700/800 Series (PA-RISC), HP-UX 8.0, TCP/IP, "make hpux80pa"
# or "make hpux80pac"
# + for HP-9000 Series with HP-UX 8.0, no TCP/IP, long filenames,
# "make hpux80notcp" or "make hpuxde"
# + for HP-9000 Series, HP-UX 9.0 - 9.10, TCP/IP, curses, restricted compiler
# (no optimization, no ANSI), all models, "make hpux90". Read the hpux90
# entry below for more info.
# + for HP-9000 700 and 800 Series, HP-UX 9.x, TCP/IP, curses,
# HP optimizing ANSI C compiler, "make hpux90o700".
# + for HP-9000 with Motorola CPUs, HP-UX 9.x, TCP/IP, curses,
# HP optimizing ANSI C compiler, "make hpux90mot".
# + for HP-9000 on other CPUs, HP-UX 9.x, TCP/IP, curses,
# HP optimizing ANSI C compiler, "make hpux90o".
# + for HP-9000 series, HP-UX 9.x, TCP/IP, curses, gcc, all models,
# "make hpux90gcc"
# + for HP-9000 700/800 Series, HP-UX 10.00,10.01,10.10,10.20,10.30, TCP/IP,
# curses, restricted compiler (no optimization, no ANSI) "make hpux100".
# + for HP-9000 700/800 Series, HP-UX 10.00,10.01,10.10,10.20,10.30, TCP/IP,
# curses, HP ANSI/optimizing compiler "make hpux100o" or "make hpux100o+"
# + for Trusted HP-UX 10.xx "make hpux100t", "make hpux100to", make hpux100to+"
# + for HP-9000 700/800 Series, HP-UX 11.00,TCP/IP,curses, restricted compiler
# (no optimization, no ANSI) "make hpux110".
# + for HP-9000 700/800 Series, HP-UX 11.00,TCP/IP,curses, restricted compiler
# HP ANSI/optimizing compiler "make hpux110o" or "make hpux110o+"
# + for Trusted HP-UX 11.xx "make hpux110t", "make hpux110to", make hpux110to+"
# + for HP-9000 PA-RISC models with NeXTSTEP 3.3, "make nextquadfat".
# + for HP-9000 PA-RISC models with OPENSTEP/Mach 4.1, "make nextquadfat".
# ? for IBM 370 Series with IX/370, "make ix370"
# ? for IBM 370 Series with AIX/370 1.2, "make aix370"
# ? for IBM 370 Series with AIX/370 3.0, "make aix370"
# ? for IBM 370 Series with AIX/ESA 2.1, "make aixesa"
# - for IBM PC/AT 286 & compatibles with Mark Williams Coherent OS,
# command-line-only version, "make coherent" (version 5A & later too big)
# ? for IBM PC 386 & compatibles with Mark Williams Coherent OS,
# minimum interactive version, "make coherentmi"
# ? for IBM PC 386 & compatibles with Mark Williams Coherent OS,
# full interactive version, prior to v4.2, "make coherentmax"
# + for IBM PC 386 & compatibles with Mark Williams Coherent OS 4.2,
# "make coherent42"
# ? for IBM PC 386 & compatibles with LynxOS 2.0 or 2.1, "make lynx21"
# ? for IBM PC 386 & compatibles with LynxOS 2.2, "make lynx"
# - for IBM PC/AT & compatibles with original MINIX, "make minix" (too big)
# ? for IBM PC family, 386-based, with MINIX/386 1.5, "make minix386"
# or if you have GNU CC, "make minix386gcc"
# + for IBM PC family, 386-based, with MINIX 2.0, "make minix20"
# + for IBM PS/2 with PS/2 AIX 1.0, 1.1, or 1.2, "make ps2aix" or ps2aixnetc.
# ? for IBM PS/2 with PS/2 AIX 1.3, "make ps2aix3"
# ? for IBM RISC System/6000 with AIX 3.0, "make aix30"
# ? for IBM RISC System/6000 with AIX 3.1.x, "make aix31"
# + for IBM RISC System/6000 with AIX 3.2.0 thru 3.2.5, "make aix32"
# + for IBM RS/6000 or Power Series with AIX 4.1 or AIX 4.1.1, "make aix41"
# + for IBM RS/6000 or Power Series with AIX 4.1 with X.25, "make aix41x25"
# + for IBM RS/6000 or Power Series with AIX 4.2, "make aix42"
# + for IBM RS/6000 or Power Series with AIX 4.3, "make aix43"
# ? for IBM RT PC with AIX 2.1, "make sys3"
# ? for IBM RT PC with AIX 2.2.1, "make rtaix" or "make rtaixc"
# ? for IBM RT PC with ACIS 4.2, "make bsd"
# ? for IBM RT PC with ACIS 4.3, "make rtacis" or "make bsd KFLAGS=-DNOANSI"
# ? for IBM RT PC with 4.3BSD/Reno, "make bsd44" or "make bsd44c"
# ? for ICL DRS400 or 400E, "make iclsys5r3"
# ? for ICL DRS3000 (80486) with DRS/NX, "make iclsys5r4_486"
# ? for ICL DRS6000 (SPARC) with DRS/NX, "make iclsys5r4"
# + for ICL DRS6000 (SPARC) with DRS/NX 4.2MP 7MPlus, "make iclsys5r4m+"
# ? Ditto but with IKSD support included, "make iclsys5r4m+iksd"
# ? for Integrated Solutions Inc V8S VME 68020, "make isi"
# ? for Intel 302 with Bell Tech Sys V/386 R3.2, "make sys5r3"
# ? for Intel Xenix/286, "make sco286"
# ? for Interactive System III (PC/IX), "make pcix" or "make is3"
# ? for Interactive System III (PC/IX) with gcc, "make is3gcc"
# ? for Interactive 386/ix 1.0.6 with TCP/IP networking, "make is5r3net2"
# ? for Interactive 386/ix 2.0.x, "make is5r3" or (POSIX) "make is5r3p"
# ? for Interactive 386/ix 2.0.x with TCP/IP networking, "make is5r3net"
# or "make is5r3net2"
# ? for Interactive 386/ix 2.2.1, job control, curses, no net, gcc,
# "make is5r3gcc"
# + for Interactive UNIX Sys V R3.2 V2.2 - 4.0 without TCP/IP, "make is5r3jc"
# ? for Interactive UNIX Sys V R3.2 V2.2 - 4.0 with TCP/IP, "make is5r3netjc"
# + for Intergraph Clipper, "make clix" or "make clixnet"
# ? for Jolix (see 386BSD)
# + for Linux on PowerMac (Mklinux DR3), "make mklinux".
# + for Linux 1.2 and later, "make linux". Uses ncurses. This version
# handles serial speeds up to 460800 bps, Linux FSSTD 1.2, TCP/IP, and
# should work on both libc and glibc systems. For static linking, use
# "make linux LNKFLAGS=-static". Please read the comments that accompany
# the linux entry.
# + for Linux builds that fail with "sys/select.h: No such file or directory",
# "make linuxns"
# + for Linux 1.2 and later but with curses.h and libcurses (rather than
# ncurses.h and libncurses), use "make linuxc".
# + for Linux 1.2 and later with no curses support at all, "make linuxnc".
# + for Linux 1.2 and later, to build with egcs, "make linuxegcs".
# + for Linux with no TCP/IP, "make linuxnotcp"
# + for Linux with lcc compiler, no TCP/IP, "make linuxnotcp-lcc"
# ? for Linux 1.0 or earlier, "make linux10", or (to remove TCP/IP)
# "make linuxnotcp". For static linking, use "make linuxs".
# IMPORTANT: Read the comments that accompany the "linux:" entry.
# ? for Luxor ABC-9000 (DIAB DS-90) with pre-5.2 DNIX, add "getcwd" to libc.a
# (see ckuins.txt), then "make dnixold".
# ? for Mach 2.6 on (anything, e.g. DECstation), "make bsd42" or "make bsd43".
# ? for MachTen (Tenon) 2.1.1.D on (e.g.) Apple Powerbook, "make machten".
# ? for Masscomp RTU AT&T System III, "make rtu"
# for other Masscomp, see Concurrent.
# ? for Microport SV/AT (System V R2), "make mpsysv" (last edit tested: 144)
# ? for Microport SVR4 2.2, 3.1, or 4.1 "make sys5r4sx"
# ? for Microsoft,IBM Xenix (/286, PC/AT, etc), "make xenix" or "make sco286"
# ? for MIPS System with RISC/os (UMIPS) 4.52 = AT&T SVR3, "make mips"
# or "make mipstcpc"
# + for MkLinux on Power Macintosh, "make mklinux"
# ? for Modcomp 9730, Real/IX, "make sys5r3" (or modify to use gcc = GLS cc)
# ? for Modcomp Realstar 1000 with REAL/IX D.1, "make sv88r32"
# ? for Motorola Four Phase, "make sys3" or "make sys3nid"
# + for Motorola Delta System V/68 R3, "make sv68r3"
# + for Motorola Delta System V/68 R3V5, "make sv68r3v5"
# + for Motorola Delta System V/68 R3V5.1, "make sv68r3v51"
# + for Motorola Delta System V/68 R3V6 with NSE TCP/IP, "make sv68r3v6"
# + for Motorola Delta System V/88 R32, "make sv88r32"
# + for Motorola Delta System V/88 R40, "make sv88r40"
# ? for Mt Xinu Mach386 on 386/486-based PCs, "make bsd43"
# ? for NCR Tower 1632, OS 1.02, "make tower1"
# ? for NCR Tower 1632 or Minitower with System V R2, "make sys3"
# or "make sys3nv"
# ? for NCR Tower 32, OS Release 1.xx.xx, "make tower32-1"
# ? for NCR Tower 32, OS Release 2.xx.xx, "make tower32-2"
# ? for NCR Tower 32, OS Releases based on Sys V R3, "make tower32"
# ? for NCR Tower 32, OS Releases based on Sys V R3 with gcc "make tower32g"
# ? for NCR System 3000, AT&T UNIX System V R4 2.0, "make sys5r4sxna"
# ? for NCR System 3000, AT&T UNIX System V R4 2.0 with Wollongong TCP/IP,
# "make sys5r4net2" or "make sys5r4net2c".
# Some header files might be misplaced; try this:
# ln /usr/include/netinet/in.h /usr/include/sys/in.h
# ln /usr/include/arpa/inet.h /usr/include/sys/inet.h
# ln /usr/include/sys/termiox.h /usr/include/termiox.h
# ? for NCR System 3000, NCR UNIX 02.02.01, same as above.
# + for NCR MP-RAS System V R4 V2.03 or 3.02, "make mpras" or "make mprastcpc"
# + for NetBSD 1.0-3.x on PC 386/486, Sparc, ..., "make netbsd"
# or (ncurses) "make netbsdn"
# or "make netbsdnoiksd" (no IKSD).
# + for NeXT with NeXTSTEP 1.0 through 3.2, "make next" (on a NeXT)
# + for NeXT with NeXTSTEP 3.3, "make next33"
# ? for NeXT with OPENSTEP/Mach 4.1, "make nextquadfat".
# + for NeXT with OPENSTEP/Mach 4.2, "make openstep42".
# ? for NeXTSTEP/486, "make next" (on a PC)
# ? for NeXTSTEP portable binary (runs on Intel or Motorola), "make nextfat"
# ? for NeXTSTEP portable binary (Intel, Motorola, HP PA-RISC, or SPARC),
# "make nextquadfat"
# ? for Nixdorf Targon/31, "make t31tos40x"
# ? for Norsk Data Uniline 88/17 with SV/88 R3.2, "make sv88r32"
# for Novell UnixWare - see UnixWare
# ? for OSF/1 (vanilla, from OS/F), "make posix"
# ? for OkiStation 7300 Series, "make sys5r4sxtcp"
# ? for Olivetti LSX-3020 with X/OS R.2.3, "make xos23" or "make xos23c"
# + for OpenBSD, "make openbsd"
# ? for OPENSTEP/Mach 4.1, "make nextquadfat" (NeXT, Intel, PA-RISC, SPARC)
# + for OPENSTEP/Mach 4.2, "make openstep42" (tested on NeXT)
# ? for Perkin-Elmer (Concurrent) 3200 series, "make sys5".
# ? for Perkin-Elmer (Concurrent) 3200 series with <dirent.h>, "make ccop1"
# ? for Perkin-Elmer/Concurrent 3200 with Xelos R02, "make ccop1"
# ? for PFU Compact A Series SX/A TISP V10/E50 (Japan), "make sxae50"
# ? for Plexus, "make sys3"
# + for Pyramid 9XXX (e.g. 9845) or MIServer T series, OSx 4.4b thru 5.1,
# "ucb make pyramid" or for HDB UUCP, "ucb make pyramid-hdb" or:
# + for Pyramid MIServer S or ES Series, DataCenter/OSx, "make pyrdcosx"
# + for Pyramid MIS-S MIPS R3000, DataCenter OSx System V R4, "make pyrdcosx"
# + for POSIX on anything, "make posix" (but adjustments might be necessary).
# + for POSIX on SunOS 4.1 or later, "make sunposix"
# ? for Prime 8000 MIPS, SVR3, "make mips" or "make mipstcpc"
# - for QNX 2.x (sorry we don't have a version of C-Kermit for QNX 2.x)
# ? for QNX 4.0 or 4.1, 16-bit, on 286 PC, Watcom C 8.5, "make qnx16_41"
# + for QNX 4.21 - 4.22A (286+), and 4.23 (386+), or higher, 16-bit,
# Watcom C 9.5x or higher, "make qnx16"
# + for QNX 4.21 and above, 32-bit, 386 or above, Watcom C 10.6, "make qnx32"
# NOTE: ("make qnx" == "make qnx32")
# + for QNX Neutrino 2+, "make qnx_nto2+"
# ? for Ridge 32 (ROS3.2), "make ridge32"
# ? for Samsung MagicStation, "make sys5r4"
# ? for SCO Xenix 2.2.1 with development system 2.2 on 8086/8 "make sco86"
# ? for SCO Xenix/286 2.2.1 with development system 2.2 on 80286, "make sco286"
# NOTE: reportedly this makefile is too long for SCO Xenix/286 make, but it
# works with "makeL", or if some of the other make entries are edited out.
# ? for SCO Xenix/386 2.2.2, "make sco386"
# ? for SCO Xenix/386 2.3.x, "make sco3r2" or "make sco3r2x"
# ? for SCO Xenix/386 SCO 2.3.3 or 2.3.4 with gcc 1.37 or later,
# "make sco386gcc" or (to add curses) "make sco386gccc".
# ? for SCO Xenix/386 or UNIX/386 with Excelan TCP/IP, "make sco3r2net"
# or (to add curses support) "make sco3r2netc" or "sco386netc"
# + for SCO XENIX 2.3.4, "make sco234" or "make sco234c" to add curses.
# + for SCO XENIX 2.3.4 with SCO TCP/IP & curses, "make sco234netc".
# ? for SCO Xenix 2.3.x with Racal-InterLan TCP/IP, "make sco3r2netri"
# for other UNIX varieties with Racal Interlan TCP/IP, read sco3r2netri entry
# ? for SCO Xenix 2.3.x with SCO (Lachman) TCP/IP, "make sco3r2lai"
# or (to add curses) "make sco3r2laic"
# for SCO UNIX... ALSO READ COMMENTS in the SCO UNIX entries for more info!
# ? for SCO UNIX/386 3.2.0 or 3.2.1, "make sco3r2" or "make sco3r2x"
# ? for SCO UNIX/386 3.2.2, "make sco3r22" or "make sco3r22gcc"
# or "make sco3r22c"
# ? for SCO UNIX/386 3.2.2 with SCO TCP/IP, "make sco3r22net"
# or "make sco3r22netc" (curses)
# ? for SCO ODT 1.1, "make sco3r22net" or "make sco3r22netc" (curses)
# + for SCO UNIX/386 3.2 V4.x, no network support, "make sco32v4"
# + or "make sco32v4ns" (this one uses no select() or sockets library)
# + for SCO UNIX/386 3.2 V4.x with TCP/IP, "make sco32v4net"
# (also sco32v4gcc, sco32v4netgcc)
# + for SCO UNIX/386 3.2 V5.0 - see SCO OpenServer.
# + for SCO UNIX 3.2v4.x with TCP/IP, <dirent.h> for Extended Acer File
# System (EAFS), curses, ANSI C compilation, "make sco32v4net"
# + or (to use select()-based CONNECT module) "make sco32v4netx".
# + for SCO UNIX 3.2v4.2, "make sco-odt30"
# + for SCO MPX 3.0 - The SCO UNIX binary runs on the corresponding MPX system.
#
# NOTE: Also see below for other entries that are variations on these.
# Also be sure to read the comments accompanying each SCO entry.
#
# + for SCO ODT 2.0, "make sco32v4net"
# + for SCO ODT 3.0, "make sco-odt30"
# + for SCO OpenServer 5.0 (OSR5), "make sco32v500"
# + for SCO OpenServer 5.0 (OSR5) with networking, "make sco32v500net"
# + for SCO OpenServer 5.0 (OSR5), gcc, "make sco32v500gcc"
# + for SCO OpenServer 5.0 (OSR5), gcc, with networking, "make sco32v500netgcc"
# + for SCO OpenServer 5.0 (OSR5), as above, ELF, "make sco32v500netgccelf"
# + for SCO OpenServer 5.0.4, use "make sco32v504xxx" entries as above.
# + for SCO OpenServer 5.0.5, use "make sco32v505xxx" entries as above.
# + for SCO OpenServer 5.0.5 with UDK, use "make sco32v505udk".
# (for SCO UnixWare - see UnixWare)
# ? for Sequent with DYNIX/ptx 1.2.1, "make dynixptx12"
# ? for Sequent with DYNIX/ptx 1.3 or 1.4 with TCP/IP, "make dynixptx13"
# ? for Sequent with DYNIX/ptx 2.0 or 2.1 with TCP/IP, "make dynixptx20"
# or "dynixptx20c"
# + for Sequent with DYNIX/ptx 2.1.6 on i486, "dynixptx216c"
# ? for Sequent with DYNIX/ptx V4.1.3 with TCP/IP, "make dynixptx41c"
# + for Sequent with DYNIX/ptx V4.4.2 with TCP/IP, "make dynixptx44"
# ? for Sequent Balance 8000 or B8 with DYNIX 3.0.xx, "make dynix3"
# or "make dynix3noacu"
# ? for Sequent Symmetry S81 with DYNIX 3.0.xx, "make dynix3"
# ? for Sequent DYNIX 3.1.xx, "make dynix31" or "make dynix31c"
# + for Siemens/Nixdorf SINIX-L Intel V5.41, "make sinix541i"
# + for Siemens/Nixdorf SINIX-N MIPS V5.42, "make sinix542"
# + for Siemens/Nixdorf SINIX-Z Intel V5.42, "make sinix542i"
# + for Siemens/Nixdorf Reliant UNIX V5.43, "make sni543"
# + for Siemens/Nixdorf Reliant UNIX V5.44, "make sni544"
# ? for Silicon Graphics Iris System V IRIX 3.2 or earlier, "make iris"
# ? for Silicon Graphics Sys V R3 with IRIX 3.3 or later, "make sys5r3"
# ? for Silicon Graphics Iris Indigo with IRIX 4.0 or 5.0, "make irix40" or
# (to include Yellow Pages and Curses) "make irix40ypc"
# ? for Silicon Graphics Iris Indigo or Elan with IRIX 4.0.x with microcode
# optimization and -O4, "make irix40u" or "irix40uc" (and read notes
# accompanying these entries).
# + for Silicon Graphics IRIX 5.1, "make irix51"
# + for Silicon Graphics IRIX 5.2, "make irix52"
# + for Silicon Graphics IRIX 5.3, "make irix53"
# + for Silicon Graphics IRIX 6.0, "make irix60".
# + for Silicon Graphics IRIX 6.2, "make irix62".
# + for Silicon Graphics IRIX 6.3, "make irix63".
# + for Silicon Graphics IRIX 6.4, "make irix64" or "make irix64gcc".
# + for Silicon Graphics IRIX 6.5, "make irix65".
# + for SGI IRIX 6.5.5 (new company name) "make irix65"
# ? for Solaris 2.0-2.3 on SPARC or Intel, SunPro CC, "make solaris2x",
# ? or to add SunLink X.25 8.0x support, "make solaris2x25".
# + for Solaris 2.4 build with gcc, "make solaris24g".
# + for Solaris 2.0-2.3 on SPARC or Intel, GNU CC, "make solaris2xg".
# + for Solaris 2.4 with X.25, "make solaris24x25".
# + for Solaris 2.5 on SPARC or Intel, SunPro CC, "make solaris25".
# + or to add SunLink X.25 8.0x support, "make solaris25x25".
# + for Solaris 2.5 on SPARC or Intel, GNU CC, "make solaris25g".
# + for Solaris 2.6 on SPARC or Intel, "make solaris26".
# + for Solaris 7 (a.k.a. 2.7) on SPARC or Intel, "make solaris7".
# + for Solbourne 4/500 with OS/MP 4 "make sunos4"
# + for Solbourne 4/500 with OS/MP 4.1 "make sunos41" or "make sunos41c"
# ? for SONY NEWS with NEWS-OS 4.0.1C, "make sonynews"
# ? for SONY NEWS with NEWS-OS 4.1.2C, "make sonynews"
# ? for Sperry/UNISYS 5000/20, UTS V 5.2 3R1, "make sys5"
# ? for Sperry/UNISYS 5000/30/35/50/55, UTS V 5.2 2.01, "make unisys5r2"
# ? for Sperry/UNISYS 5000/80 with System V R3, "make sys5r3"
# ? for Sperry/UNISYS 5000/95 with System V R3, "make sys5r3"
# For UNISYS SVR3 it might be necessary to "make sys5r3 KFLAGS=-UDYNAMIC"
# ? for Stardent 1520, "make sys5r3"
# ? for Stratus FTX 2.x, try "make ftx" or else "make sys5r4" or "sys5r4sx"
# + for Stratus FTX 3.x, PA-RISC 1.0 or 2.0, "make ftx" or "make ftxtcp"
# ? for Sun with Sun UNIX 3.5 and gcc, "make sunos3gcc"
# ? for Sun with pre-4.0 SunOS versions, "make bsd" (or appropriate variant)
# ? for Sun with SunOS 4.0, BSD environment, "make sunos4"
# ? for Sun with SunOS 4.0, BSD, with SunLink X.25, make sunos4x25
# ? for Sun with SunOS 4.0, AT&T Sys V R3 environment, "make sunos4s5"
# + for Sun with SunOS 4.1 or 4.1.1, BSD environment, "make sunos41"
# or "make sunos41c" (curses) or "make sunos41gcc" (compile with gcc)
# + for Sun with SunOS 4.1.x, BSD, with SunLink X.25 7.00 or earlier,
# "make sunos41x25" or "make sunos41x25c" (curses)
# + for Sun with SunOS 4.1, 4.1.1, AT&T Sys V R3 environment, "make sunos41s5"
# + for Sun with SunOS 4.1, 4.1.1, POSIX environment, "make sunposix"
# + for Sun with SunOS 4.1.2, "make sunos41" or any of its variations.
# NOTE: All SunOS 4.x systems -- Shared libraries are used by default.
# If this causes problems, add -Bstatic to CFLAGS.
# NOTE2: When building C-Kermit under SunOS for the BSD universe,
# but /usr/5bin/cc is ahead of /usr/ucb/cc in your PATH, add
# "CC=/usr/ucb/cc CC2=/usr/ucb/cc" to the make entry.
# NOTE3: If an executable built on one type of Sun hardware does not work
# on another type, rebuild the program from source on the target machine.
# for Sun with Solaris 1.x use SunOS 4.1 entries.
# for Sun with Solaris 2.0 and higher use Solaris entries.
# + for Sun SPARC with Linux, "make linux"
# ? for Sun SPARC with OPENSTEP/Mach 4.1, "make nextquadfat"
# ? for Sun SPARC with OPENSTEP/Mach 4.2, "make openstep42"
# - for Tandy 16/6000 with Xenix 3.0, "make trs16" (C-Kermit 7.0 is too big)
# ? for Tektronix 6130/4132/43xx (e.g.4301) with UTek OS, "make utek"
# or (for models without hardware flow control), "make uteknohwfc"
# ? for Tektronix XD88 series with UTekV OS, "make utekvr3"
# ? for Tri Star Flash Cache with Esix SVR3.2, "make sys5r3"
# ? for Unistar, "make sys5"
# ? for Unisys S/4040 68040 CTIX SVR3.2 6.4.1, "make ctix" or "make sys5r3"
# ? for Unisys U5000 UNIX SVR3 6.x, "make sys5r3" or "make sys5r3c"
# ? for Unisys U6000 UNIX SVR4 1.x, "make sys5r4nx" or "make sys5r4nxnetc"
# for Unisys ... (also see Sperry)
# for Univel - see UnixWare
# ? for UnixWare 1.x, "make unixware" or "make unixwarenetc".
# If there are problems with this in C-K 7.0 see notes at unixware entry.
# + for Unixware 2.0.x "make uw2"
# + for UnixWare 2.1.x, "make uw21"
# + for UnixWare 2.x with IKSD (shadow password) support, "make uw2iksd"
# + for UnixWare 7, "make uw7"
# + for UnixWare 7 with IKSD support, "make uw7iksd" or "make uw7iksdudk"
# + for UnixWare 7 with OpenSSL, "make uw7ssl"
# ? for Valid Scaldstar, "make valid"
# ? for Whitechapel MG01 Genix 1.3, "make white"
# ? for Zilog ZEUS 3.21, "make zilog"
#
# The result should be a runnable program called "wermit" in the current
# directory. After satisfactory testing, you can rename wermit to "kermit"
# and put it where users can find it.
#
# To remove intermediate and object files, "make clean".
# If your C compiler produces files with an extension other than "o",
# then "make clean EXT=u", "make clean EXT=s", or whatever.
#
# To run lint on the source files, "make lintsun", "make lintbsd",
# "make lints5", as appropriate.
#
##############################################################################
#
# NOTES FOR V7 AND 2.X BSD (BASED ON VERSION 4E OF C-KERMIT, 1987):
#
# For Unix Version 7, several variables must be defined to the values
# associated with your system. BOOTNAME=/edition7 is the kernel image on
# okstate's Perkin-Elmer 3230. Others will probably be /unix. PROCNAME=proc
# is the name of the structure assigned to each process on okstate's system.
# This may be "_proc" or some other variation. See <sys/proc.h> for more
# info on your systems name conventions. NPROCNAME=nproc is the name of a
# kernel variable that tells how many "proc" structures there are. Again
# this may be different on your system, but nproc will probably be somewhere.
# The variable NPTYPE is the type of the nproc variable -- int, short, etc.
# which can probably be gleaned from <sys/param.h>. The definition of DIRECT
# is a little more complicated. If nlist() returns, for "proc" only, the
# address of the array, then you should define DIRECT as it is below. If
# however, nlist() returns the address of a pointer to the array, then you
# should give DIRECT a null definition (DIRECT= ). The extern declaration in
# <sys/proc.h> should clarify this for you. If it is "extern struct proc
# *proc", then you should NOT define DIRECT. If it is "extern struct proc
# proc[]", then you should probably define DIRECT as it is below. See
# ckuv7.hlp for further information.
#
# For 2.9 BSD, the makefile may use pcc rather than cc for compiles; that's
# what the CC and CC2 definitions are for (the current version of the
# makefile uses cc for both; this was tested in version 4E of C-Kermit and
# worked OK on the DEC Pro 380, but all bets are off for version 5A). 2.9
# support basically follows the 4.1 path. Some 2.9 systems use "dir.h" for
# the directory header file, others will need to change this to "ndir.h".
#
# The v7 and 2.9bsd versions assume I&D space on a PDP-11. When building
# C-Kermit for v7 on a PDP-11, you should probably add the -i option to the
# link flags. Without I&D space, overlays will be necessary (if available),
# or code segment mapping (a`la Pro/Venix) if that's available.
#
# C-Kermit 5A (and 6.0?) can be built for 2.10 and 2.11BSD, using overlays,
# but a separate makefile is used because this one is too big.
#
##############################################################################
#
# V7-specific variables.
# These are set up for Perkin-Elmer 3230 V7 Unix:
#
PROC=proc
DIRECT=
NPROC=nproc
NPTYPE=int
BOOTFILE=/edition7
#
# ( For old Tandy TRS-80 Model 16A or 6000 V7-based Xenix, use PROC=_proc,
# DIRECT=-DDIRECT, NPROC=_Nproc, NPTYPE=short, BOOTFILE=/xenix )
#
###########################################################################
#
# Compile and Link variables:
#
# EXT is the extension (file type) for object files, normally o.
# See MINIX entry for what to do if another filetype must be used.
#
EXT=o
#LNKFLAGS=
SHAREDLIB=
CC= cc
CC2= cc
MAKE= make
SHELL=/bin/sh
###########################################################################
# SAMPLE INSTALLATION SCRIPT
#
# Modify to suit your own computer's file organization
# and permissions. If you don't have write access to the destination
# directories, "make install" will fail. In most cases, a real installation
# will also require you to chown / chgrp for the UUCP lockfile and/or tty
# devices, and perhaps also to chmod +s the appropriate permission fields.
#
# Default binary, man, and doc directories are supplied below. You can
# override them in your 'make' command. Examples:
#
# make install # Accept defaults.
# make "INFODIR=/usr/share/lib/kermit" install # Override INFODIR default.
#
# You can also build and install in one step, e.g.:
#
# make sunos41gcc install
#
WERMIT = makewhat
DESTDIR =
BINDIR = /usr/local/bin
MANDIR = /usr/man/manl
INFODIR = /usr/local/doc/kermit
MANEXT = l
ALL = $(WERMIT)
all: $(ALL)
.c.o:
$(CC) $(CFLAGS) -DKTARGET=\"$(KTARGET)\" -c $<
#Clean up intermediate and object files
clean:
@echo 'Removing object files...'
-rm -f ckcmai.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckcpro.$(EXT) ckcfns.$(EXT) \
ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) ckucon.$(EXT) ckutio.$(EXT) \
ckufio.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) ckwart.$(EXT) ckuusx.$(EXT) \
ckuusy.$(EXT) ckcnet.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) ckusig.$(EXT) \
ckucns.$(EXT) ckcmdb.$(EXT) ckuath.$(EXT) ckctel.$(EXT) ckclib.$(EXT) \
ckcuni.$(EXT) ck_crp.$(EXT) ck_ssl.$(EXT) ckupty.$(EXT) ckcpro.c wart
# Install C-Kermit after building -- IMPORTANT: Read the instructions above.
install:
cp wermit $(DESTDIR)$(BINDIR)/kermit
chmod 755 $(DESTDIR)$(BINDIR)/kermit
@echo
@echo "Kermit binary installed:"
@ls -l $(DESTDIR)$(BINDIR)/kermit
@echo
@echo " WARNING: If C-Kermit is to be used for dialing out, you will"
@echo " probably need to change its owner and group and permissions to"
@echo " match the cu program. See the ckuins.txt file for details."
@echo
@echo "Installing man page..."
cp ckuker.nr $(DESTDIR)$(MANDIR)/kermit.$(MANEXT)
# To make sure 'man' notices the new source file and doesn't keep
# showing the old formatted version, remove the old formatted version,
# something like this:
# rm -f $(DESTDIR)$(MANDIR)/../cat$(MANEXT)/kermit.$(MANEXT)
# or this (which requires CATDIR to be defined):
# rm -f $(DESTDIR)$(CATDIR)/kermit.$(MANEXT)
chmod 644 $(DESTDIR)$(MANDIR)/kermit.$(MANEXT)
@echo
@echo "Installing info files..."
@if test -d $(INFODIR); then \
echo "$(INFODIR) exists..." ; \
else \
echo "Creating $(INFODIR)/..." ; \
mkdir $(INFODIR) ; \
chmod 755 $(INFODIR) ; \
fi
@echo "Copying text files to $(INFODIR)..."
@cp COPYING.TXT $(INFODIR)
@cp ckaaaa.txt $(INFODIR)/READ.ME
@cp ckuaaa.txt $(INFODIR)
@cp ckermit2.txt ckcbwr.txt ckubwr.txt ckuins.txt $(INFODIR)
@cp ckermit.ini ckermod.ini ckurzsz.ini ckermit.k*d $(INFODIR)
@cp telnet.txt security.txt iksd.txt $(INFODIR)
@cp cke*.ksc $(INFODIR)
@cp ckcplm.txt ckccfg.txt $(INFODIR)
@chmod 644 $(INFODIR)/*
@ls -l $(INFODIR)/*
makewhat:
@echo 'make what? You must tell which platform to make C-Kermit for.'
@echo Examples: make hpux1100, make aix43, make solaris26, etc.
@echo Please read the comments at the beginning of the makefile.
###########################################################################
#
# Dependencies Section:
manpage: ckuker.nr
# Normal version
wermit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
ckucon.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
ckcuni.$(EXT) ckupty.$(EXT)
$(CC2) $(LNKFLAGS) -o wermit \
ckcmai.$(EXT) ckclib.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \
ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
ckcpro.$(EXT) ckucmd.$(EXT) ckuus2.$(EXT) ckuus3.$(EXT) \
ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) \
ckuusx.$(EXT) ckuusy.$(EXT) ckuusr.$(EXT) ckucon.$(EXT) \
ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) \
ckusig.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) $(LIBS)
# Version with CONNECT module that uses select() instead of fork()
xermit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
ckcuni.$(EXT) ckupty.$(EXT)
$(CC2) $(LNKFLAGS) -o wermit \
ckcmai.$(EXT) ckclib.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \
ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
ckcpro.$(EXT) ckucmd.$(EXT) ckuus2.$(EXT) ckuus3.$(EXT) \
ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) \
ckuusx.$(EXT) ckuusy.$(EXT) ckuusr.$(EXT) ckucns.$(EXT) \
ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckusig.$(EXT) \
ckctel.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) $(LIBS)
# Malloc Debugging version
mermit: ckcmdb.$(EXT) ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) \
ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
ckcpro.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) \
ckuxla.$(EXT) ckucon.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \
ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) \
ckusig.$(EXT) ckcuni.$(EXT)
$(CC2) $(LNKFLAGS) -o mermit ckcmdb.$(EXT) ckclib.$(EXT) ckcmai.$(EXT)\
ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
ckuusr.$(EXT) ckucon.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckcuni.$(EXT) $(LIBS)
# Kerberized Version - Subject to USA export restrictions.
krbmit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) \
ck_ssl.$(EXT)
$(CC2) $(LNKFLAGS) -o krbmit ckcmai.$(EXT) ckclib.$(EXT) \
ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \
ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ck_ssl.$(EXT) $(LIBS)
krbmit-debug: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) \
ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
ckcpro.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) \
ckuxla.$(EXT) ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) \
ckudia.$(EXT) ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) \
ckusig.$(EXT) ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) \
ckupty.$(EXT) ck_ssl.$(EXT) ckcmdb.$(EXT)
$(CC2) $(LNKFLAGS) -o krbmit ckcmdb.$(EXT) ckcmai.$(EXT) \
ckclib.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) \
ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) \
ckucmd.$(EXT) ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) \
ckuus5.$(EXT) ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) \
ckuusy.$(EXT) ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) \
ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) \
ck_ssl.$(EXT) $(LIBS)
# SRP(TM) Version - Subject to USA export restrictions.
srpmit: ckcmai.$(EXT) ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
ckuath.$(EXT) ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) \
ck_ssl.$(EXT)
$(CC2) $(LNKFLAGS) -o srpmit ckcmai.$(EXT) ckclib.$(EXT) \
ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \
ck_crp.$(EXT) ckcuni.$(EXT) ckupty.$(EXT) ck_ssl.$(EXT) $(LIBS)
# Kerberized Version - Not subject to USA export restrictions.
krbmit-export: ckcmai.$(EXT) \
ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
ckuath.$(EXT) ckcuni.$(EXT) ckupty.$(EXT)
$(CC2) $(LNKFLAGS) -o krbmit-export ckcmai.$(EXT) ckclib.$(EXT) \
ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \
ckcuni.$(EXT) ckupty.$(EXT) $(LIBS)
# SRP(TM) Version - Not subject to USA export restrictions.
srpmit-export: ckcmai.$(EXT) \
ckclib.$(EXT) ckucmd.$(EXT) ckuusr.$(EXT) ckuus2.$(EXT) \
ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) ckuus6.$(EXT) \
ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) ckcpro.$(EXT) \
ckcfns.$(EXT) ckcfn2.$(EXT) ckcfn3.$(EXT) ckuxla.$(EXT) \
ckucns.$(EXT) ckutio.$(EXT) ckufio.$(EXT) ckudia.$(EXT) \
ckuscr.$(EXT) ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) \
ckuath.$(EXT) ckcuni.$(EXT) ckupty.$(EXT)
$(CC2) $(LNKFLAGS) -o srpmit-export ckcmai.$(EXT) ckclib.$(EXT) \
ckutio.$(EXT) ckufio.$(EXT) ckcfns.$(EXT) ckcfn2.$(EXT) \
ckcfn3.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) ckucmd.$(EXT) \
ckuus2.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
ckuus6.$(EXT) ckuus7.$(EXT) ckuusx.$(EXT) ckuusy.$(EXT) \
ckuusr.$(EXT) ckucns.$(EXT) ckudia.$(EXT) ckuscr.$(EXT) \
ckcnet.$(EXT) ckctel.$(EXT) ckusig.$(EXT) ckuath.$(EXT) \
ckcuni.$(EXT) ckupty.$(EXT) $(LIBS)
###########################################################################
# man page...
#
# WARNING: Using "cc -E" to preprocess the man page is not portable, but it
# works OK in SunOS 4.1.x, HP-UX, etc. We use the preprocessor to produce
# custom man pages based on ifdef, else, and endif directives. But the
# preprocessor replaces omitted lines by blank lines and comment lines, so we
# use grep to filter them out. THIS MEANS THAT THE SOURCE FILE, ckuker.cpp,
# MUST NOT CONTAIN ANY BLANK LINES!
# Note: on some systems you might need to add -x to the first grep invocation.
#
ckuker.nr: ckuker.cpp
$(CC) $(CFLAGS) -E ckuker.cpp |grep -v "^$$" |grep -v "^\#" > ckuker.nr
###########################################################################
# Dependencies for each module...
#
ckcmai.$(EXT): ckcmai.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcnet.h ckcsig.h \
ckuusr.h ckctel.h ckclib.h
ckclib.$(EXT): ckclib.c ckclib.h ckcdeb.h ckcasc.h ckcsym.h
ckcpro.$(EXT): ckcpro.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckclib.h
ckcpro.c: ckcpro.w wart ckcdeb.h ckcsym.h ckcasc.h ckcker.h ckcnet.h ckctel.h \
ckclib.h
./wart ckcpro.w ckcpro.c
ckcfns.$(EXT): ckcfns.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcxla.h ckcuni.h \
ckuxla.h ckclib.h ckcnet.h
ckcfn2.$(EXT): ckcfn2.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcxla.h \
ckuxla.h ckctel.h ckclib.h ckcnet.h ckcuni.h
ckcfn3.$(EXT): ckcfn3.c ckcker.h ckcdeb.h ckcsym.h ckcasc.h ckcxla.h \
ckuxla.h ckclib.h ckcuni.h
ckuxla.$(EXT): ckuxla.c ckcker.h ckcsym.h ckcdeb.h ckcxla.h ckuxla.h ckclib.h \
ckcuni.h
ckcuni.$(EXT): ckcuni.c ckcdeb.h ckcker.h ckucmd.h ckcuni.h ckcxla.h \
ckuxla.h ckcuni.h
ckuusr.$(EXT): ckuusr.c ckucmd.h ckcker.h ckuusr.h ckcsym.h ckcdeb.h ckcxla.h \
ckuxla.h ckcasc.h ckcnet.h ckctel.h ckclib.h ckcuni.h
ckuus2.$(EXT): ckuus2.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \
ckcasc.h ckcnet.h ckcsym.h ckctel.h ckclib.h ckcuni.h
ckuus3.$(EXT): ckuus3.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \
ckcasc.h ckcnet.h ckcsym.h ckctel.h ckctel.h ckclib.h ckcuni.h
ckuus4.$(EXT): ckuus4.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \
ckcasc.h ckcnet.h ckuver.h ckcsym.h ckctel.h ckclib.h ckcuni.h
ckuus5.$(EXT): ckuus5.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcasc.h ckcnet.h \
ckcsym.h ckctel.h ckclib.h ckcxla.h ckuxla.h ckcuni.h
ckuus6.$(EXT): ckuus6.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcasc.h ckcnet.h \
ckcsym.h ckctel.h ckclib.h
ckuus7.$(EXT): ckuus7.c ckucmd.h ckcker.h ckuusr.h ckcdeb.h ckcxla.h ckuxla.h \
ckcasc.h ckcnet.h ckcsym.h ckctel.h ckclib.h ckcuni.h
ckuusx.$(EXT): ckuusx.c ckcker.h ckuusr.h ckcdeb.h ckcasc.h ckcsym.h \
ckcsig.h ckcnet.h ckctel.h ckclib.h ckcxla.h ckuxla.h ckcuni.h
ckuusy.$(EXT): ckuusy.c ckcker.h ckcdeb.h ckcasc.h ckcnet.h ckcsym.h ckctel.h \
ckclib.h
ckucmd.$(EXT): ckucmd.c ckcasc.h ckucmd.h ckcdeb.h ckcsym.h ckctel.h ckclib.h
ckufio.$(EXT): ckufio.c ckcdeb.h ckuver.h ckcsym.h ckclib.h \
ckcxla.h ckuxla.h ckcuni.h
ckutio.$(EXT): ckutio.c ckcdeb.h ckcnet.h ckuver.h ckcsym.h ckctel.h ckclib.h
ckucon.$(EXT): ckucon.c ckcker.h ckcdeb.h ckcasc.h ckcnet.h ckcsym.h ckctel.h \
ckclib.h
ckucns.$(EXT): ckucns.c ckcker.h ckcdeb.h ckcasc.h ckcnet.h ckcsym.h ckctel.h \
ckclib.h ckcxla.h ckuxla.h ckcuni.h
ckcnet.$(EXT): ckcnet.c ckcdeb.h ckcker.h ckcnet.h ckcsym.h ckcsig.h ckctel.h \
ckclib.h
ckctel.$(EXT): ckcsym.h ckcdeb.h ckcker.h ckcnet.h ckctel.h ckclib.h
wart: ckwart.$(EXT)
$(CC) $(LNKFLAGS) -o wart ckwart.$(EXT) $(LIBS)
ckcmdb.$(EXT): ckcmdb.c ckcdeb.h ckcsym.h ckclib.h
ckwart.$(EXT): ckwart.c
ckudia.$(EXT): ckudia.c ckcker.h ckcdeb.h ckucmd.h ckcasc.h ckcsym.h ckcsig.h \
ckcnet.h ckctel.h ckclib.h
ckuscr.$(EXT): ckuscr.c ckcker.h ckcdeb.h ckcasc.h ckcsym.h ckcsig.h \
ckcnet.h ckctel.h ckclib.h
ckusig.$(EXT): ckusig.c ckcasc.h ckcdeb.h ckcker.h ckcnet.h ckuusr.h \
ckcsig.h ckctel.h ckclib.h
ckupty.$(EXT): ckupty.c ckupty.h ckcdeb.h
ckuath.$(EXT): ckuath.c ckcdeb.h ckucmd.h ckuath.h ckuat2.h ckctel.h \
ckclib.h ckcnet.h
ck_crp.$(EXT): ck_crp.c ckcdeb.h ckcnet.h ckuath.h ckclib.h
ck_ssl.$(EXT): ck_ssl.c ckcdeb.h ckucmd.h ckuath.h ckuat2.h ckctel.h \
ckclib.h ck_ssl.h
###########################################################################
#
# Entries to make C-Kermit for specific systems.
#
# Put the ones that need short makefiles first.
#Apollo Aegis 9.x. Includes TCP/IP support.
#You can also add processor-dependent optimization switches like -M570.
aegis:
@echo Making C-Kermit $(CKVER) for Apollo Aegis 9.x...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD4 -DTCPSOCKET -DNOCSETS -DCK_CURSES -O $(KFLAGS)" \
"LIBS = -lcurses -ltermcap"
#Apple Mac II, A/UX pre-3.0
#Warning, if "send *" doesn't work, try the auxufs makefile entry below.
aux:
@echo Making C-Kermit $(CKVER) for Macintosh A/UX...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DAUX -DTCPSOCKET $(KFLAGS) -i -O" "LNKFLAGS = -i"
#Apple Mac II, A/UX pre-3.0, compiled with gcc
auxgcc:
@echo Making C-Kermit $(CKVER) for Macintosh A/UX...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DAUX -DTCPSOCKET -traditional $(KFLAGS) -i -O" \
"LNKFLAGS = " "CC = gcc" "CC2 = gcc"
#Apple Mac II, A/UX, pre-3.0, but with ufs file volumes, uses <dirent.h>.
auxufs:
@echo Making C-Kermit $(CKVER) for Macintosh A/UX...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DAUX -DTCPSOCKET -DDIRENT $(KFLAGS) -i -O" "LNKFLAGS = -i"
#Apple Mac II, A/UX 3.0, compiled with gcc
aux3gcc:
@echo Making C-Kermit $(CKVER) for Macintosh A/UX 3.0...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DAUX -DHDBUUCP -DLFDEVNO -DTCPSOCKET -DDIRENT $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS = $(LIBS)" \
"CC=gcc -pipe -traditional" "CC2=gcc -pipe -traditional"
#Apple Mac II, A/UX 3.0, compiled with gcc, uses curses
aux3cgcc:
@echo Making C-Kermit $(CKVER) for Macintosh A/UX 3.0...
$(MAKE) "MAKE=$(MAKE)" aux3gcc KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(KFLAGS) -DCK_CURSES" "LIBS = -lcurses $(LIBS)"
# Tenon MachTen, tested on Apple Powerbook with MachTen 2.1.1.D.
# NOTE: This doesn't do anything about UUCP. It only works if /usr/spool/uucp
# has permission of 777, and dialout device is world read/writeable.
machten:
@echo Making C-Kermit $(CKVER) for MachTen...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD43 -DTCPSOCKET -DSIG_V -DNDGPWNAM -DCK_CURSES -O \
$(KFLAGS)" "LIBS=-lcurses -ltermcap"
#Bell Labs Research UNIX V10
#Can't add TCP/IP because there is no sockets library. It would have to
#be done using streams, but there is no code in C-Kermit for that.
#Remove -DNOJC if desired (if your system has csh, ksh, or bash).
bellv10:
@echo Making C-Kermit $(CKVER) for Bell Labs Research UNIX V10...
$(MAKE) wermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBELLV10 -DBSD4 -DNDIR -DNOJC -DNOSYSIOCTLH -DNOSETREU \
-DNOCSETS -MINIDIAL $(KFLAGS)"
# WARNING: The early BSD entries do not build in version 7.0 with the stock
# BSD compiler: "Too many defines". These builds must be accomplished by:
# copying the /usr/include tree to someplace else, preprocessing there with cc
# -E -I./include or whatever (plus all the same -D's), renaming the the
# resulting files back to their original names, bringing them back to the
# original BSD system, and running the make target there. This technique was
# used for 4.2 and 4.3 BSD on a VAX. If you how to rebuild cpp to have more
# space for defines, that would be easier...
#Berkeley Unix 4.1
bsd41:
@echo Making C-Kermit $(CKVER) for 4.1BSD...
$(MAKE) wermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBSD41" "LIBS = -ljobs"
#Berkeley 4.2, 4.3, also Ultrix-32 1.x, 2.x, 3.x, many others
# Add -O, -s, etc, if they work.
# If you have a version of BSD but signal() is void rather than int,
# "make bsd KFLAGS=-DSIG_V".
bsd42:
@echo Making C-Kermit $(CKVER) for 4.2BSD...
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBSD4 -DTCPSOCKET -DNOREALPATH -DNOTIMEH -DSYSTIMEBH \
-DNOIKSD -DNOPUTENV -DNOANSI -DBIGBUFOK $(KFLAGS)" "LIBS=$(LIBS)"
bsd42c:
$(MAKE) bsd42 "KFLAGS=-DCK_CURSES $(KFLAGS)" \
"LIBS=-lcurses -ltermcap $(LIBS)"
bsd:
$(MAKE) bsd42 KTARGET=$${KTARGET-$(@)}
#Berkeley 4.2, 4.3, minimum size (command-line only)
bsdm:
@echo Making C-Kermit $(CKVER) for 4.2BSD...
$(MAKE) bsd KTARGET=$${KTARGET-$(@)} \
"KFLAGS= -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG -DNOSCRIPT \
-DNOCSETS -DNOICP $(KFLAGS)"
#Berkeley 4.2, 4.3, minimimum interactive (no scripting, no charsets)
bsdmi:
@echo Making C-Kermit $(CKVER) for 4.2BSD...
$(MAKE) bsd KTARGET=$${KTARGET-$(@)} \
"KFLAGS= -DNODIAL -DNOCSETS -DNOSPL $(KFLAGS)"
#Berkeley Unix with HoneyDanBer UUCP
bsdhdb:
@echo Making C-Kermit $(CKVER) for 4.2BSD with HDB UUCP...
$(MAKE) bsd KTARGET=$${KTARGET-$(@)} \
"KFLAGS= -DHDBUUCP $(KFLAGS)"
#Berkeley Unix 4.3 with acucntrl program
bsd43:
@echo Making C-Kermit $(CKVER) for 4.3BSD...
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBSD4 -DBSD43 -DTCPSOCKET -DNOREALPATH -DNOTIMEH \
-DACUCNTRL -DSYSTIMEBH -DNOIKSD -DNOPUTENV -DNOANSI -DBIGBUFOK \
$(KFLAGS)" "LIBS=$(LIBS)"
#Ditto, with curses support.
bsd43c:
@echo Making C-Kermit $(CKVER) for 4.3BSD + curses...
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBSD4 -DBSD43 -DTCPSOCKET -DNOREALPATH -DNOTIMEH -DNOIKSD \
DCK_CURSES -DACUCNTRL -DSYSTIMEBH -DNOPUTENV -DNOANSI -DBIGBUFOK \
$(KFLAGS)" "LIBS=-lcurses -ltermcap $(LIBS)"
#Berkeley Unix 4.2 or 4.3 with lock directory /usr/spool/uucp/LCK/LCK..ttyxx,
#but without acucntrl program
bsdlck:
@echo Making C-Kermit $(CKVER) for 4.2BSD, /usr/spool/uucp/LCK/...
$(MAKE) bsd KTARGET=$${KTARGET-$(@)} \
"KFLAGS= -DLCKDIR $(KFLAGS)"
#Berkeley UNIX 4.4-Lite, 4.4-Encumbered, Net/2, etc (Post-Reno),
#with TCP/IP networking. This includes NetBSD, FreeBSD, etc.
#NOTE: This is not a pure POSIX configuration. Using -DPOSIX instead of
# -DBSD44 prevents any kind of directory-reading (for wildcard expansion),
#and disallows use of ENOTCONN symbol for detecting broken network
#connections, and disallows RTS/CTS flow control, and would also require
#definition of the appropriate UUCP lockfile convention.
#Do not add -DCK_POSIX_SIG without reading <signal.h> first! For example,
#sigsetjmp(), etc, tend to be defined but not implemented.
bsd44:
@echo Making C-Kermit $(CKVER) for 4.4BSD...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD44 -DTCPSOCKET $(KFLAGS) -O"
#Berkeley UNIX 4.4, as above, but with curses for fullscreen display
#Please read notes for bsd44 entry just above.
# NOTE: This one dumps core on the real 4.4BSD system at UC Berkeley
# (an HP-9000 300), so use the no-curses version for that one.
bsd44c:
@echo Making C-Kermit $(CKVER) for 4.4BSD with curses...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET $(KFLAGS) -O" \
"LIBS= -lcurses -ltermcap $(LIBS)"
#For FreeBSD 1.x. Not tested recently - might need ncurses.
freebsd:
@echo 'Making C-Kermit $(CKVER) for FreeBSD...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC -funsigned-char \
$(KFLAGS) -O -pipe" "LIBS= -lcurses -ltermcap -lcrypt $(LIBS)"
#FreeBSD 2.x with ncurses
freebsd2:
@echo 'Making C-Kermit $(CKVER) for FreeBSD 2.x with ncurses...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD44 -DCK_NCURSES -DTCPSOCKET -DNOCOTFMC -DUSE_STRERROR \
-DTPUTSARGTYPE=int -DTPUTSARG1CONST -DFREEBSD2 -funsigned-char \
$(KFLAGS) -O -pipe" \
"LIBS= -lncurses -ltermlib -lcrypt $(LIBS)"
#For FreeBSD 2.x -- Uses curses rather than ncurses
freebsd2c:
@echo 'Making C-Kermit $(CKVER) for FreeBSD 2.x with curses...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC -DUSE_STRERROR \
-DTPUTSARGTYPE=int -DTPUTSARG1CONST -DFREEBSD2 \
-funsigned-char $(KFLAGS) -O -pipe" \
"LIBS= -lcurses -ltermlib -lcrypt $(LIBS)"
#FreeBSD 3.x with ncurses and uu_lock()
#(Note: uu_lock() goes back to 2.2.2, but not necessarily 2.0)
freebsd3:
@echo 'Making C-Kermit $(CKVER) for FreeBSD 3.x with ncurses...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD44 -DCK_NCURSES -DTCPSOCKET -DNOCOTFMC -funsigned-char \
-DTPUTSARGTYPE=int -DUSE_STRERROR -DFREEBSD3 -DUSE_UU_LOCK \
$(KFLAGS) -O -pipe" \
"LIBS= -lncurses -lcrypt -lutil $(LIBS)"
#As above but with curses rather than ncurses.
freebsd3c:
@echo 'Making C-Kermit $(CKVER) for FreeBSD 3.x with curses...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC -DUSE_UU_LOCK \
-DTPUTSARGTYPE=int -DUSE_STRERROR -DFREEBSD3 $(KFLAGS) \
-funsigned-char -pipe -O" \
"LIBS= -lcurses -lcrypt -lutil $(LIBS)"
#NetBSD - all versions - with curses, not ncurses.
netbsd:
@echo Making C-Kermit $(CKVER) for NetBSD with curses...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DUSE_STRERROR -DTPUTSISVOID \
-DCK_DTRCD -DCK_DTRCTS -DTPUTSARGTYPE=int $(KFLAGS) -O" \
"LIBS= -lcurses -lcrypt $(LIBS)"
#NetBSD with ncurses rather than curses
netbsdn:
@echo Making C-Kermit $(CKVER) for NetBSD with ncurses...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC \
-DCK_DTRCD -DCK_DTRCTS \
-DUSE_STRERROR -DTPUTSISVOID -DTPUTSARGTYPE=int $(KFLAGS) -O" \
"LIBS= -L/usr/pkg/lib -lncurses -lcrypt"
#NetBSD with no IKSD
netbsdnoiksd:
@echo Making C-Kermit $(CKVER) for NetBSD with curses...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD44 -DCK_CURSES -DTCPSOCKET -DUSE_STRERROR -DTPUTSISVOID \
-DCK_DTRCD -DCK_DTRCTS \
-DNOIKSD -DTPUTSARGTYPE=int $(KFLAGS) -O" \
"LIBS= -lcurses $(LIBS)"
#OpenBSD - Uses ncurses as its curses so use -ltermlib, not -ltermcap
#Add -DMAINTYPE=int if you get complaints about main: return type is not int.
openbsd:
@echo Making C-Kermit $(CKVER) for OpenBSD...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD44 -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET -DOPENBSD \
-DNDSYSERRLIST $(KFLAGS) -O" "LIBS= -lcurses -ltermlib"
# make 386bsd 0.0new, posix
# for 386bsd 0.1.24, change /usr/include/termios.h to #define NCCS if
# _POSIX_SOURCE is #defined. (source: lewine, posix prgmrs guide, o`reilly)
#NOTE: Lock directory is /var/spool/lock. Formerly, it was /var/spool/uucp,
#but reportedly <wjones@halcyon.com> that was due to a typo in 'man tip'.
386bsd:
@echo 'Making C-Kermit $(CKVER) for jolix 386BSD 0.0new and 0.1.24...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DPOSIX -DSETREUID -DPIDSTRING -DUSLEEP \
-D_386BSD -DCK_CURSES -DTCPSOCKET \
-DLOCK_DIR=\\\"/var/spool/lock\\\" \
$(KFLAGS) -O" "LNKFLAGS = -s" "LIBS = -lcurses -ltermcap"
#Mac OS X 1.0 (Rhapsody) -- TCP/IP but no curses.
macosx10:
@echo Making C-Kermit $(CKVER) for `uname -s`...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DMACOSX10 -DTCPSOCKET -O $(KFLAGS)"
#Mac OS X 1.0 (Rhapsody) -- TCP/IP and curses.
#Note: curses must be obtained separately. See next entry for ncurses.
#Add "LIBS = -lcurses -ltermcap" if necessary (but reportedly it is not).
macosx10c:
@echo Making C-Kermit $(CKVER) for `uname -s` + curses...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DMACOSX10 -DCK_CURSES -DTPUTSFNTYPE=void -DTPUTSISVOID \
-DTCPSOCKET -O $(KFLAGS)"
#Mac OS X 1.0 (Rhapsody) -- TCP/IP and ncurses.
#Note: ncurses must be obtained separately.
#In the event of trouble with this one try the next one.
macosx10nc:
@echo Making C-Kermit $(CKVER) for `uname -s` + ncurses...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DMACOSX10 -DCK_NCURSES -DTCPSOCKET -O $(KFLAGS) " \
"LIBS= -lncurses $(LIBS)"
#The problem here is that if curses.h also exists, it conflicts with
#ncurses.h and and we have fatal errors. If this happens to you, then
#try this entry.
macosx10ncx:
@echo Making C-Kermit $(CKVER) for `uname -s` + ncurses...
@rm -f ./curses.h; touch ./curses.h
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DMACOSX10 -DCK_NCURSES -DTCPSOCKET -I. -O $(KFLAGS) " \
"LIBS= -lncurses $(LIBS)"
@rm -f ./curses.h
#Acorn RISCiX, based on ...
#Berkeley Unix 4.2 or 4.3 with lock directory /usr/spool/uucp/LCK/LCK..ttyxx,
#but without acucntrl program
riscix:
@echo Making C-Kermit $(CKVER) for RISCiX, /usr/spool/uucp/LCK..ttyxx
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD42 -DBSD4 -DRISCIX -DNOCSETS \
-DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DDIRENT -DCK_CURSES \
-DMAXSP=9024 -DMAXRD=9024 -DSBSIZ=9050 -DRBSIZ=9050 \
-DFTTY=\\\"/dev/serial\\\" -DNOCSETS -DNOCYRIL \
-DNOANSI -w -O2 -fomit-frame-pointer" \
"LIBS= -lcurses -ltermcap " \
"CC= /usr/ucb/cc" \
"CC2= /usr/ucb/cc"
#Acorn RISCiX, as above, but using gcc
riscix-gcc:
@echo Making C-Kermit $(CKVER) for RISCiX, /usr/spool/uucp/LCK..ttyxx
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD42 -DBSD4 -DRISCIX -DNOCSETS \
-DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DDIRENT -DCK_CURSES \
-DMAXSP=9024 -DMAXRD=9024 -DSBSIZ=9050 -DRBSIZ=9050 \
-DFTTY=\\\"/dev/serial\\\" -DNOCSETS -DNOCYRIL \
-DNOANSI -w -O2 -fomit-frame-pointer" \
"LIBS= -lcurses -ltermcap " \
"CC= gcc -mbsd" \
"CC2= gcc -mbsd"
#Convergent CTIX 6.4.1
ctix:
@echo 'Making C-Kermit $(CKVER) for Convergent CTIX 6.4.1'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DSVR3 -DDIRENT -DTCPSOCKET -DHDBUUCP -DCK_CURSES \
-DNONAWS $(KFLAGS) -XO" "LNKFLAGS=-s" "LIBS=-lsocket -lcurses -lc_s"
mcs -d wermit
# The following makefile entry should work for any Harris Night Hawk system
# (either 88k or 68k based) running release 6.1 or later of the CX/UX
# operating system. This is a POSIX and ANSI-C compliant system which also
# supports BSD networking. (Earlier CX/UX releases will probably work with
# sys5r3, but this has not been verified).
#
cx_ux:
@echo Making C-Kermit $(CKVER) for Harris Night Hawk CX/UX 6.1 or later
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS=-DPOSIX -DTCPSOCKET -DHDBUUCP -DPID_T=pid_t -DWAIT_T=int \
-Dd_ino=d_fileno -DUID_T=uid_t -DGID_T=gid_t $(KFLAGS) -Xa \
-O3 -g" "LNKFLAGS=-O3"
#Intergraph Clipper, CLIX, job control, HDB UUCP.
clix:
@echo 'Making C-Kermit $(CKVER) for Intergraph CLIX...'
$(MAKE) wermit "CC=acc" "CC2=acc" KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -w -DSVR3 -DCLIX -DDIRENT -DHDBUUCP -DNOSYSLOG -DUSE_MEMCPY \
-DNOGETUSERSHELL -DNOREALPATH $(KFLAGS) -O" \
"LNKFLAGS=" "LIBS= -lbsd"
#As above + TCP/IP...
clixnet:
@echo 'Making networked C-Kermit $(CKVER) for Intergraph CLIX...'
$(MAKE) wermit "CC=acc" "CC2=acc" KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -w -DSVR3 -DCLIX -DDIRENT -DHDBUUCP -DNOSYSLOG -DUSE_MEMCPY \
-DTCPSOCKET -DNOGETUSERSHELL -DNOREALPATH $(KFLAGS) -O" \
"LNKFLAGS=" "LIBS= -lbsd"
#Mark Williams Coherent 286 or 386 on IBM PC family.
#There is a 64K limit on program size, so this is a command-line only version.
coherent:
$(MAKE) "CFLAGS = -O -DCOHERENT -DNOANSI -DNOICP -DNOSETKEY \
-DNOCSETS -DNOHELP -DNODIAL -DNOSCRIPT -DNODEBUG -DNOTLOG -DNOXMIT \
-DNOMSEND -DNOFRILLS -DNOSYSIOCTLH -DSELECT_H $(KFLAGS) -VSUVAR" \
KTARGET=$${KTARGET:-$(@)} wermit
#Mark Williams Coherent 386 on IBM PC family.
#This will make a "minimum interactive" version - no scripts,
#no character sets, no help, no dial, no debug/transaction logging, no
#transmit, msend, mail, type, etc.
coherentmi:
$(MAKE) "CFLAGS = -O -DCOHERENT -DNOANSI -DNOSETKEY \
-DNOSHOW -DNOCSETS -DNOHELP -DNODIAL -DNOSCRIPT -DNODEBUG -DNOTLOG \
-DNOXMIT -DNOMSEND -DNOFRILLS -DNOSYSIOCTLH -DNOSERVER -DNOUUCP \
-DNOSPL -DNOPUSH -DNOMDMHUP -DNOJC -DNOFDZERO -DNOESCSEQ \
-DNOCMDL $(KFLAGS) -VSUVAR -DSELECT_H" KTARGET=$${KTARGET:-$(@)} \
wermit
#Mark Williams Coherent 386 on IBM PC/AT family.
coherentmax:
$(MAKE) "CFLAGS = -O -DCOHERENT -DNOANSI -DSELECT_H \
-DNOSYSIOCTLH $(KFLAGS) -VSUVAR" "LNKFLAGS = -O -s" \
KTARGET=$${KTARGET:-$(@)} wermit
#Mark Williams Coherent 386 4.2. Includes curses but not TCP/IP.
#Requires updates to the 4.2.10 compiler; the regular compiler fails to
#to handle "complex expressions".
coherent42:
$(MAKE) "CFLAGS = -T500000 -DCOHERENT -DNOANSI -DSELECT -DDCLGETCWD \
-DNOSYSLOG -DDIRENT -DCK_CURSES -DCK_NEWTERM -DCK_WREFRESH -VSUVAR \
-DNOSYSIOCTLH -DNOINITGROUPS -DNOSYMLINK -DSELECT_H -O $(KFLAGS)" \
"LNKFLAGS = -O -s" KTARGET=$${KTARGET:-$(@)} \
"LIBS = -lsocket -lcurses" wermit
#DEC Ultrix 2.x
# Add -O, -DDYNAMIC, -s, etc, if they work.
ultrix2x:
@echo Making C-Kermit $(CKVER) for Ultrix 2.x ...
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBSD4 -DTCPSOCKET -DDU2 -DNOGETUSERSHELL $(KFLAGS)"
du2:
$(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix2x
#DEC Ultrix 3.1 (and probably also 3.0)
ultrix3x:
@echo Making C-Kermit $(CKVER) for Ultrix 3.x...
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBSD4 -DTCPSOCKET -DDIRENT -DSIG_V -DNOGETUSERSHELL \
$(KFLAGS) -O" "LNKFLAGS = -s"
du3:
$(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix3x
#DEC Ultrix 4.0 or 4.1 on DECstation, VAXstation, VAX, etc.
ultrix40:
@echo Making C-Kermit $(CKVER) for Ultrix 4.0 or 4.1...
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DDU4 -DNOGETUSERSHELL \
$(KFLAGS) -Olimit 1450" "LNKFLAGS = -s"
#DEC Ultrix 4.2-4.5 on DECstation, DECsystem, VAXstation, VAX, etc.
#Like ultrix40, except now C compiler supports -O2 optimization.
ultrix42:
@echo Making C-Kermit $(CKVER) for Ultrix 4.2 or later...
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL $(KFLAGS) \
-O2 -Olimit 1750" "LNKFLAGS = -s"
du42:
$(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix42
#DEC Ultrix 4.2-4.5 on DECstation, DECsystem, VAXstation, VAX, etc.
#Like du42, but with curses support added, optimization and a couple features
#removed because in C-Kermit 7.0 we get bizarre relocation errors otherwise.
ultrix42c:
@echo Making C-Kermit $(CKVER) for Ultrix 4.2 or later...
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL \
-DCK_CURSES -DNODEBUG -DNOIKSD $(KFLAGS)" "LNKFLAGS = -s" \
"LIBS= -lcurses -ltermcap"
ultrix43:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DULTRIX43 $(KFLAGS)" \
KTARGET=$${KTARGET-$(@)} ultrix42c
ultrix43notcp:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DULTRIX43 -DNONET $(KFLAGS)" \
KTARGET=$${KTARGET-$(@)} ultrix42c
ultrix44:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DULTRIX44 $(KFLAGS)" \
KTARGET=$${KTARGET-$(@)} ultrix42c
ultrix45:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DULTRIX45 $(KFLAGS)" \
KTARGET=$${KTARGET-$(@)} ultrix42c
du42c:
$(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix42c
#DEC Ultrix 4.3A or later on DECsystem and DECstation 5000/50, /150 or /260
#with MIPS R4x00 processor. The "-mips3" switch generates R4000-specific
#code, which is faster and more compact, but *won't* run on earlier
#DECsystems and DECstations.
ultrix43-mips3:
@echo Making C-Kermit $(CKVER) for Ultrix 4.3A or later, R4000 cpu...
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL \
$(KFLAGS) -O2 -Olimit 1750 -mips3" "LNKFLAGS = -s -mips3"
du43-mips3:
$(MAKE) "MAKE=$(MAKE)" ultrix43-mips3
#DEC Ultrix 4.3A or later on MIPS R4x000 based systems.
#Like ultrix43-mips3 but with curses support added
ultrix43c-mips3:
@echo Making C-Kermit $(CKVER) for Ultrix 4.3A or later, R4000 cpu...
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL -DCK_CURSES \
$(KFLAGS) -O2 -Olimit 3000 -mips3" "LNKFLAGS = -s -mips3" \
"LIBS= -lcurses -ltermcap"
du43c-mips3:
$(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix43c-mips3
#DEC Ultrix 4.4 on DECstation 5000/50 or /150 with R4000 MIPS processor,
#or 5000/260 with R4400. The "-mips3" switch generates R4000-specific code,
#which is faster and more compact but *won't* run on earlier DECstations.
ultrix44-mips3:
@echo Making C-Kermit $(CKVER) for Ultrix 4.4, R4000 cpu ...
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBSD4 -DTCPSOCKET -DSIG_V -DNOGETUSERSHELL \
$(KFLAGS) -O2 -Olimit 1450 -mips3" "LNKFLAGS = -s -mips3"
du44-mips3:
$(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET-$(@)} ultrix44c-mips3
#DEC Ultrix 4.2 on DECstation, VAXstation, VAX, etc, System V R4 environment
ultrix42s5r4:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4 on Ultrix...'
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS = -O2 -Olimit 1500 -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
-DTCPSOCKET $(KFLAGS)" "LNKFLAGS = -s"
#OSF/1
osf:
$(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD4 -DOSF -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \
-DCK_CURSES -DCK_RTSCTS -DFNFLOAT $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS = -lbsd -lcurses -ltermcap -lm"
#DEC OSF/1 V1.0-1.3 on DECstation, VAX, Alpha, or PC.
dec-osf:
$(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD4 -DOSF -DOSF13 -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \
-DNOREALPATH -DNOIKSD -DCK_CURSES -DCK_RTSCTS -DFNFLOAT -DNODEBUG \
-DNOUNICODE $(KFLAGS)" \
"LNKFLAGS = -non_shared" "LIBS = -lbsd -lcurses -ltermcap -lm"
# This one causes "relocation out-of-range" errors in the linker.
old-dec-osf:
@echo Making C-Kermit $(CKVER) for DEC OSF/1 V1.x...
@echo If you are building for DEC OSF/1 2.0, please use dec-osf20.
@echo Remove or adjust -O2 and/or -Olimit if they cause trouble.
$(MAKE) osf KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= -O2 -Olimit 2400 $(KFLAGS)"
#DEC OSF/1 2.0 on Alpha and probably nowhere else.
#The only difference from OSF/1 is that optimization is omitted.
#The optimized version gets strange runtime errors, like the PAUSE command
#not working. Add "-unsigned" to make all chars unsigned.
dec-osf20:
@echo Making C-Kermit $(CKVER) for DEC OSF/1 V2.0...
@echo Optimization omitted because it causes runtime errors.
@echo See comments in makefile.
$(MAKE) osf KTARGET=$${KTARGET:-$(@)} "KFLAGS= -DOSF20 $(KFLAGS)"
dec-osf30:
@echo Making C-Kermit $(CKVER) for DEC OSF/1 V3.0...
$(MAKE) osf KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= -DOSF30 -O2 -Olimit 2400 $(KFLAGS)"
#Digital UNIX 3.2
# Must compile ckuus[6x].c separately without optimization otherwise
# the optimizer dumps core - keep CFLAGS here in sync with those from osf.
du32:
@echo Making C-Kermit $(CKVER) for Digital UNIX 3.2...
$(MAKE) ckuus6.$(EXT) \
"CFLAGS= -DBSD4 -DOSF -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \
-DCK_CURSES -DCK_RTSCTS -DFNFLOAT $(KFLAGS)"
$(MAKE) ckuusx.$(EXT) \
"CFLAGS= -DBSD4 -DOSF -D_BSD -DTCPSOCKET -DCK_ANSIC -DSIG_V \
-DCK_CURSES -DCK_RTSCTS -DFNFLOAT $(KFLAGS)"
$(MAKE) osf "KFLAGS= -DOSF32 -DHDBUUCP -O2 -Olimit 3000 $(KFLAGS)"
dec-osf32:
$(MAKE) "MAKE=$(MAKE)" du32 KTARGET=$${KTARGET:-$(@)}
du40:
@echo Making C-Kermit $(CKVER) for Digital UNIX 4.0...
$(MAKE) osf KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= -DOSF40 -DHDBUUCP -DFNFLOAT \
-unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm"
du40gcc:
@echo Making C-Kermit $(CKVER) for Digital UNIX 4.0 with gcc ...
$(MAKE) osf CC=gcc CC2=gcc KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= -DOSF40 -DHDBUUCP $(KFLAGS)"
#Tru64 Unix 4.0E
tru64-40e:
@echo Making C-Kermit $(CKVER) for Tru64 UNIX 4.0E...
$(MAKE) osf KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= -DOSF40 -DTRU64 -DHDBUUCP -DFNFLOAT -DNOCOTFMC \
-unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm"
tru64-40f:
@echo Making C-Kermit $(CKVER) for Tru64 UNIX 4.0F...
$(MAKE) osf KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= -DOSF40 -DTRU64 -DHDBUUCP -DFNFLOAT -DNOCOTFMC \
-unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm"
tru64-40g:
@echo Making C-Kermit $(CKVER) for Tru64 UNIX 4.0G...
$(MAKE) osf KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= -DOSF40 -DOSF40G -DTRU64 -DHDBUUCP -DFNFLOAT -DNOCOTFMC \
-unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)" "LIBS=-lm"
tru64-50:
@echo Making C-Kermit $(CKVER) for Tru64 UNIX 5.0...
$(MAKE) osf KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= -DTRU64 -DOSF50 -DHDBUUCP \
-unsigned -std1 -O3 -Olimit 2400 $(KFLAGS)"
du50:
$(MAKE) tru64-50 KTARGET=$${KTARGET:-$(@)}
du40-ridiculous-checking:
@echo Making C-Kermit $(CKVER) for Digital UNIX 4.0.
@echo Checking everything - assumes DECC...
$(MAKE) osf KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= -DOSF40 -DHDBUUCP -w0 -warnprotos -check -portable \
-unsigned -std1 -O3 -Olimit 1760 $(KFLAGS)"
#Sequent DYNIX/ptx 1.2.1
dynixptx12:
@echo Making C-Kermit $(CKVER) for Sequent DYNIX/ptx 1.2.1...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DPTX -DNOGETUSERSHELL \
-DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t $(KFLAGS) -i -O" \
"LNKFLAGS = -i"
#Sequent DYNIX/ptx 1.3 or 1.4
dynixptx13:
@echo Making C-Kermit $(CKVER) for Sequent DYNIX/ptx 1.3 TCP/IP...
$(MAKE) xermit "CFLAGS= -O KTARGET=$${KTARGET:-$(@)} \
-DSVR3 -DDIRENT -DHDBUUCP -DPTX -DCK_POLL -DNOGETUSERSHELL \
-DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DTCPSOCKET $(KFLAGS) -i" \
"LNKFLAGS = -i" "LIBS = -lsocket -linet -lnsl"
#Sequent DYNIX/ptx 2.0, ANSI C compilation
#Should work on any hardware platform when DYNIX/ptx runs, including
#386, 486, Pentium.
dynixptx20:
@echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.0...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DPOSIX -DHDBUUCP -DTCPSOCKET \
-DWAIT_T=int -DPTX -DNOGETUSERSHELL $(KFLAGS) -O" \
"LIBS = -lsocket -linet -lnsl"
#Sequent DYNIX/ptx 2.0, ANSI C compilation, with curses
dynixptx20c:
@echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.0...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DPOSIX -DHDBUUCP -DTCPSOCKET -DWAIT_T=int -DPTX -DCK_CURSES \
-DCK_NEWTERM -DNOGETUSERSHELL $(KFLAGS) -O" \
"LIBS = -lsocket -linet -lnsl -lcurses -ltermcap"
#Sequent DYNIX/ptx 2.1.6, 80486, ANSI C compilation, with curses:
# -Xa -- use ANSI compiler.
# -Wc,-pw -- suppress portability warnings.
# -Wc,-i386 -- 80386 cpu.
# -Wc,-i486 -- 80486 cpu.
# -Wc,-P5 -- Pentium (default).
# -Wc,-O3 -- highest optimization.
# -Wa,-N17061 -- increase symbol table from default of 15013 for ckcuni.c.
# Early versions of DYNIX/ptx 2.1.x may need -DCK_POLL instead of -DSELECT.
# Add "$&" after the colon in the "xermit" target for parallel makes.
dynixptx216c:
@echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.1.6'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DPOSIX -DHDBUUCP -DDYNAMIC -DTCPSOCKET \
-DSELECT -DCK_REDIR -DCK_NAWS -DCK_WREFRESH -DSW_ACC_ID \
-DTCP_NODELAY -DTRMBUFL=2048 -DBIGBUFOK -DHADDRLIST \
-DPTX -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL -DNOREALPATH \
$(KFLAGS) -Xa -Wc,-pw -Wc,-i486 -Wc,-O3 -Wa,-N17061" \
"LIBS = -lXbsd -lseq -lsocket -linet -lnsl -lmalloc -lm -lcurses" \
"LNKFLAGS = -s"
#Sequent DYNIX/ptx 2.1.6, gcc 2.7.2.2, with curses:
dynixptx216cgcc:
@echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 2.1.6 gcc'
$(MAKE) xermit "CC = gcc" "CC2 = gcc" KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DPOSIX -DHDBUUCP -DDYNAMIC -DTCPSOCKET \
-DSELECT -DCK_REDIR -DCK_NAWS -DCK_WREFRESH -DSW_ACC_ID \
-DTCP_NODELAY -DTRMBUFL=2048 -DBIGBUFOK -DHADDRLIST \
-DPTX -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL -DNOREALPATH \
$(KFLAGS) -O3 -pipe -funsigned-char" \
"LIBS = -lXbsd -lseq -lsocket -linet -lnsl -lmalloc -lm -lcurses" \
"LNKFLAGS = -s"
#Sequent DYNIX/ptx 4.0, ANSI C compilation, with curses
dynixptx41c:
@echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 4.0...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DPOSIX -DHDBUUCP -DTCPSOCKET \
-DWAIT_T=int -DPTX -DPTX4 -DCK_CURSES -DCK_NEWTERM \
-DNOGETUSERSHELL $(KFLAGS) -O" \
"LIBS = -lsocket -lnsl -lcurses -ltermcap"
#Sequent DYNIX/ptx 4.4, ANSI C compilation, with curses
dynixptx44:
@echo 'Making C-Kermit $(CKVER) for POSIX, Sequent DYNIX/ptx 4.4...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DPTX -DPTX4 -DPOSIX -DHDBUUCP -DTCPSOCKET -DWAIT_T=int \
-DCK_CURSES -DCK_NEWTERM -DBIGBUFOK -DSELECT -DNOGETUSERSHELL \
$(KFLAGS) -O" "LIBS = -lsocket -lnsl -lcurses -ltermcap"
#Sequent DYNIX 3.0.x
dynix3:
@echo Making C-Kermit $(CKVER) for Sequent DYNIX 3.0.x...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD43 -DACUCNTRL -DTCPSOCKET -O \
-DPWUID_T=int -DGID_T=int $(KFLAGS)"
#Sequent DYNIX 3.0.x, no ACUCNTRL
dynix3noacu:
@echo Making C-Kermit $(CKVER) for Sequent DYNIX 3.0.x...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD43 -DLCKDIR -DTCPSOCKET -O \
-DUID_T=int -DGID_T=int $(KFLAGS)"
#Sequent DYNIX 3.1.x
dynix31:
@echo Making C-Kermit $(CKVER) for Sequent DYNIX 3.1.x...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -O -DDCLPOPEN -DLCKDIR -DBSD4 -DTCPSOCKET $(KFLAGS)"
#Sequent DYNIX 3.1.2, as above but with curses, to be compiled by gcc 2.3.3.
dynix31c:
@echo 'Making C-Kermit $(CKVER) for Sequent DYNIX 3.1.2, curses...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -O2 -DDCLPOPEN -DACUCNTRL \
-DBSD43 -DTCPSOCKET -DCK_CURSES -DUID_T=int \
$(KFLAGS)" "LIBS= -lcurses -ltermcap"
#Convex C1 with Berkeley Unix
convex:
@echo Making C-Kermit $(CKVER) for Convex C1 / BSD...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD4 $(KFLAGS) -Dmsleep=mnap"
#Convex C210 with Convex/OS 8
convex8:
@echo Making C-Kermit $(CKVER) for Convex C210 with OS 8
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD4 -DTCPSOCKET -DNODEBUG -DDIRENT -DNOFILEH \
$(KFLAGS) -DSIG_V -Dmsleep=mnap"
#Convex C2 with Convex OS 9.1 (should also work with 8.1 or later)
#with ANSI C compiler, uses BSD 4.3 uucp lockfile convention.
convex9:
@echo Making C-Kermit $(CKVER) for Convex C210 with OS 9.1
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DPOSIX -DCONVEX9 -DNOIEXTEN -DDIRENT -DNOFILEH -DTCPSOCKET \
-D__STDC__ -DLCKDIR -Dmsleep=mnap -O -ext -tm c1 $(KFLAGS)" \
"LNKFLAGS = -ext"
#Convex C2 with Convex OS 10.1 or later
#with gcc 2.x C compiler
convex10gcc:
@echo Making C-Kermit $(CKVER) for Convex C2 with OS 10.1 using gcc
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DPOSIX -DCONVEX9 -DNOIEXTEN -DDIRENT -DNOFILEH -DTCPSOCKET \
-D__STDC__ -Dmsleep=mnap -O2 $(KFLAGS)" CC=gcc CC2=gcc
#Cray X-MP or Y-MP UNICOS 6.x or 7.x.
#NOTE: NPROC tells how many parallel makes to run. If your Cray has multiple
#processors, you can set NPROC up to the number of CPUs, e.g. NPROC=16.
cray:
@echo 'Making C-Kermit $(CKVER) for Cray X/Y-MP UNICOS 6.x or 7.0...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \
"CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS) -O1"
#Cray X-MP or Y-MP UNICOS 8.0 Alpha.
cray8:
@echo 'Making C-Kermit $(CKVER) for Cray X/Y-MP UNICOS 8.0 Alpha...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \
"CFLAGS= -DSVR4 -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS) -O1"
#Cray-2 or Cray 3-CSOS
#NOTE: NPROC tells how many parallel makes to run. If your Cray has multiple
#processors, you can set NPROC up to the number of CPUs, e.g. NPROC=16.
craycsos:
@echo 'Making C-Kermit $(CKVER) for Cray-2/3 CSOS
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} NPROC=1 \
"CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET \
$(KFLAGS) -DCK_ANSIC -DCK_CURSES" "LIBS=-lnet"
#NeXTSTEP 1.0 through 3.2.
#Includes fullscreen file transfer display (curses) and TCP/IP support.
#Uses shared library to make executable program about 80K smaller.
#Remove "LIBS = -lsys_s" if this causes trouble.
next:
@echo Making C-Kermit $(CKVER) for NeXTSTEP...
@echo 'If you get errors in ckutio.c about w_S, w_T, etc,'
@echo 'add KFGLAGS=-DNOREDIRECT to your make command.'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DNEXT -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \
-pipe -DCK_CURSES $(KFLAGS) -O -w" "LIBS = -lsys_s -lcurses -ltermcap"
nextc:
$(MAKE) "MAKE=$(MAKE)" next KTARGET=$${KTARGET:-$(@)}
nextg:
$(MAKE) "MAKE=$(MAKE)" next KFLAGS=-Wall KTARGET=$${KTARGET:-$(@)}
nextgc:
$(MAKE) "MAKE=$(MAKE)" next KFLAGS=-Wall KTARGET=$${KTARGET:-$(@)}
#NeXTSTEP 3.3.
#Includes fullscreen file transfer display and TCP/IP.
next33:
@echo Making C-Kermit $(CKVER) for NeXTSTEP 3.3...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DNEXT33 -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \
-pipe -DCK_CURSES $(KFLAGS) -O -w" "LIBS = -lsys_s -lcurses -ltermcap"
#OPENSTEP 4.2 for Sparc, m680x0, HP PA-RISC, and Intel.
#Includes fullscreen file transfer display and TCP/IP.
#ckcpro.c compiled without optimization because it crashes the compiler.
openstep42:
@echo Making C-Kermit $(CKVER) for OPENSTEP 4.2...
$(MAKE) ckcpro.$(EXT) \
"CFLAGS= -DOPENSTEP42 -DNEXT33 -DTCPSOCKET -DLCKDIR -DNOPUTENV \
-DFNFLOAT -pipe -DCK_CURSES $(KFLAGS) -w"
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DOPENSTEP42 -DNEXT33 -DTCPSOCKET -DLCKDIR -DNOPUTENV \
-DFNFLOAT -pipe -DCK_CURSES $(KFLAGS) -O -w" \
"LIBS = -lsys_s -lcurses -ltermcap"
#NeXT with malloc debugger
nextmd:
@echo Making C-Kermit $(CKVER) for NeXT with malloc debugging...
$(MAKE) mermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DNEXT -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \
-DCK_CURSES $(KFLAGS) -O -w -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG" \
"LIBS = -lsys_s -lcurses -ltermcap"
#Build for NeXTSTEP with "fat" binaries (MABs) that run on both Motorola
#and Intel platforms.
nextfat:
$(MAKE) "MAKE=$(MAKE)" next KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-Wall -arch m68k -arch i386" "LNKFLAGS = -arch m68k -arch i386"
#NeXTSTEP on Intel Platforms.
next486:
@echo Making C-Kermit $(CKVER) for NeXTSTEP on Intel Platforms...
@echo 'If you get errors in ckutio.c about w_S, w_T, etc,'
@echo 'add KFGLAGS=D-DNOREDIRECT to your make command.'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DNEXT -DTCPSOCKET -DLCKDIR -DNOPUTENV -DFNFLOAT \
-DNODEBUG -O3 -fno-omit-frame-pointer -fschedule-insns2 -pipe \
-DCK_CURSES $(KFLAGS) -w" "LIBS = -lsys_s -lcurses -ltermcap"
#Single binary that runs on NeXT 68030 and 68040, Intel, HP, and Sparc,
#as well as on OpenStep/Mach.
nextquadfat:
$(MAKE) "MAKE=$(MAKE)" next KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-Wall -arch m68k -arch i386 -arch hppa -arch sparc" \
"LNKFLAGS = -arch m68k -arch i386 -arch hppa -arch sparc"
#BeBox
beboxdr7:
@echo 'Making C-Kermit $(CKVER) for the BeBox...'
@echo 'Link step will fail with default Metroworks linker 64K limit.'
@echo 'Code Warrior Gold required to link big programs.'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CC=/boot/develop/tools/mwcc" "CC2=/boot/develop/tools/mwld" \
"CFLAGS= -DBEBOX -DBE_DR_7 -DPOSIX -DNOUUCP $(KFLAGS) -O"
#BeBox BeOS DR7 only
bebox:
@echo 'Making C-Kermit $(CKVER) for BeBox...'
@echo 'Link step will fail with default Metroworks linker 64K limit.'
@echo 'Code Warrior Pro 3.0 for BeBox required to link big programs.'
$(MAKE) wermit "CC=mwcc" "CC2=mwld" KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBEBOX -DPOSIX -DNOUUCP $(KFLAGS) -O"
#BeOS 4.5
#We have to use the wermit target because 'fd_set' is unknown.
beos45:
$(MAKE) wermit "CC=$(CC)" "CC2=$(CC2)" KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBEOS -DBEOS45 -DPOSIX -DNOIKSD -DNOREALPATH -DSYSTIMEH \
-DNOCOTFMC -DNOUUCP $(KFLAGS) -O" \
"LIBS = $(LIBS)"
#BeOS 4.5
beos45net:
$(MAKE) beos45 "KFLAGS=-DTCPSOCKET -DNO_DNS_SRV $(KFLAGS)" \
"LIBS=-lnet -lnetapi"
#Plan 9 from Bell Labs
plan9:
@echo 'C-Kermit for Plan 9 from Bell Labs - calling ckpker.mk...'
make -f ckpker.mk
#POSIX
posix:
@echo 'Making C-Kermit $(CKVER) for pure POSIX...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DPOSIX -DNOUUCP $(KFLAGS) -O"
#Berkeley Software Design Inc. BSDI
# Substitute "LIBS= -lnewcurses -ltermcap" if desired.
bsdi:
@echo 'Making C-Kermit $(CKVER) for BSDI ...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD44 -DSETREUID -DSW_ACC_ID -DBIGBUFOK \
-DTCPSOCKET -DCK_CURSES -DFNFLOAT $(KFLAGS) -O" \
"LIBS= -lcurses -ltermcap -lm"
#Berkeley Software Design Inc. BSDI - has higher serial speeds than 1.x.
bsdi2:
$(MAKE) "MAKE=$(MAKE)" bsdi KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DBSDI2 $(KFLAGS)"
bsdi3:
$(MAKE) "MAKE=$(MAKE)" bsdi KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DBSDI2 -DBSDI3 $(KFLAGS)"
bsdi4:
$(MAKE) "MAKE=$(MAKE)" bsdi KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DBSDI2 -DBSDI3 -DBSDI4 -DTPUTSFNTYPE=void -DTPUTSISVOID \
-m486 $(KFLAGS)"
# (old name for the above)
bsdiposix:
$(MAKE) "MAKE=$(MAKE)" bsdi
#Pyramid 9XXX (e.g. 9845) or MIServer T series, OSx 4.4b thru 5.1
pyramid:
@echo Making C-Kermit $(CKVER) for Pyramid Dual Port OSx
ucb $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD43 -DTCPSOCKET -DPYRAMID -O $(KFLAGS)" "LNKFLAGS = -s"
#Pyramid Dual Port OSx using HonyDanBer UUCP, curses and TCP
pyramid-hdb:
@echo Making C-Kermit $(CKVER) for Pyramid Dual Port OSx
ucb $(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DBSD43 -DTCPSOCKET -DHBDUUCP -DCK_CURSES -O $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS = -lcurses -ltermcap"
#Pyramid DC/OSx (UNIX System V R4).
#Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
#are not misplaced in sys (rather than netinet and arpa, respectively).
#Uses ANSI C.
#NOTE: Remove -O and Olimit:2500 from CFLAGS if TELNET connections do not work.
pyrdcosx:
@echo 'Making C-Kermit $(CKVER) for Pyramid DC/OSx...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -Xa -O -DSVR4 -DDIRENT -DHDBUUCP -DSELECT -DNOGETUSERSHELL \
-DCK_CURSES -DSTERMIOX -DTCPSOCKET -DPYRAMID -K Olimit:3100 \
-DNO_DNS_SRV $(KFLAGS)" "LIBS= -lcurses -lsocket -lnsl" "LNKFLAGS = -s"
#IBM's AIX 3.0 on IBM 370 mainframe, tested on AIX F44 thru F50.
aix370:
@echo Making C-Kermit $(CKVER) for IBM System/370 AIX 3.0...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DAIX370 -DTCPSOCKET -DLCKDIR -DDIRENT $(KFLAGS)" \
"LIBS = -lbsd"
#IBM's AIX/ESA 2.1 (OSF/1) on IBM mainframe
aixesa:
@echo Making C-Kermit $(CKVER) for IBM AIX/ESA...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DAIXESA -DTCPSOCKET $(KFLAGS) -O"
#IBM PS/2 with AIX 1.0 thru 1.3.
# Reports indicate that -O switch must be omitted.
# It is also possible that "make bsd" will work (reports welcome).
# One report said "make LIBS=-lbsd bsd" did the trick.
# NOTLOG is to get around a 'tlog' symbol defined in one of the headers.
ps2aix:
@echo 'Making C-Kermit $(CKVER) for IBM AIX 1.x PS/2...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATTSV -DNOREALPATH -DPS2AIX10 -DSIG_V \
-DNOUNICODE -DNOTLOG $(KFLAGS) -i" \
"LNKFLAGS = -i"
ps2aixnetc:
@echo 'Making C-Kermit $(CKVER) for IBM AIX 1.x PS/2...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATTSV -DNOREALPATH -DPS2AIX10 -DTCPSOCKET -DCK_CURSES \
-DSIG_V -DNOUNICODE -DNOTLOG $(KFLAGS) -i" \
"LIBS = -lcurses" "LNKFLAGS = -i"
ps2aix3:
$(MAKE) ps2aix KTARGET=$${KTARGET:-$(@)}
#IBM RT PC with AIX 2.2.1
#This one has unique and strange lockfiles.
rtaix:
@echo 'Making C-Kermit $(CKVER) for IBM RT PC, AIX 2.2.1...'
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS = -DATTSV -DRTAIX -DHDBUUCP -DTCPSOCKET -DNOIKSD -Wq,-SJ2 \
-DCLSOPN -DNOREALPATH -DNOUNICODE -DNOPUTENV $(KFLAGS) -O -w" \
"LNKFLAGS = -s"
#IBM RT PC with AIX 2.2.1
#This one has unique and strange lockfiles.
rtaixc:
@echo 'Making C-Kermit $(CKVER) for IBM RT PC, AIX 2.2.1, curses...'
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS = -DATTSV -DRTAIX -DHDBUUCP -DTCPSOCKET -DCK_CURSES \
-DCLSOPN -DNOREALPATH -DNOIKSD -DNOPUTENV -Wq,-SJ2 $(KFLAGS) -O -w" \
"LIBS=-lcurses" "LNKFLAGS = -s"
#IBM RT PC with AIX (ACIS) 2.2.1 (BSD 4.3)
# Add -O, -DDYNAMIC, -s, etc, if they work.
rtacis:
@echo Making C-Kermit $(CKVER) for RT PC with ACIS 2.2.1 = BSD 4.3...
$(MAKE) xermit KTARGET=$${KTARGET-$(@)} \
"CFLAGS= -DBSD4 -DTCPSOCKET -DNOREALPATH -DNOIKSD -DNOPUTENV \
$(KFLAGS) -U__STDC__" "LNKFLAGS = -s"
#IBM AIX 3.0, 3.1, or 3.2 for RISC System/6000.
rs6000:
@echo Making C-Kermit $(CKVER) for IBM AIX 3.0 or 3.1, RS/6000...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DAIXRS -DTCPSOCKET -DSVR3 -DDIRENT -DCK_ANSIC \
-DCK_POLL -DCLSOPN -DSELECT_H -DNOTTYLOCK -O $(KFLAGS)" \
"LNKFLAGS = -s"
#IBM AIX 3.0, 3.1, or 3.2 for RISC System/6000, with curses.
rs6000c:
@echo Making C-Kermit $(CKVER) for IBM AIX 3.0 or 3.1, RS/6000...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DAIXRS -DTCPSOCKET -DSVR3 -DDIRENT -DCK_ANSIC \
-DCK_POLL -DCLSOPN -DCK_CURSES -DSELECT_H -DNOTTYLOCK -DNOREALPATH \
-O $(KFLAGS)" "LIBS= -lcurses -ltermcap" "LNKFLAGS = -s"
aix30:
$(MAKE) rs6000 KTARGET=$${KTARGET:-$(@)}
aix31:
$(MAKE) rs6000 KTARGET=$${KTARGET:-$(@)}
#IBM AIX 3.2 for RISC System/6000.
#In case of "subprogram too complex" warnings, add "-qmaxmem=4000" to CFLAGS.
rs6aix32:
@echo Making C-Kermit $(CKVER) for IBM AIX 3.2, RS/6000...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DAIXRS -DTCPSOCKET -DSVR4 -DDIRENT -DCK_ANSIC -DNOREALPATH \
-DSELECT_H -DCLSOPN -DNOTTYLOCK -O $(KFLAGS)" "LNKFLAGS = -s"
#IBM AIX 3.2 for RISC System/6000.
rs6aix32c:
@echo Making C-Kermit $(CKVER) for IBM AIX 3.2, RS/6000, TCP+curses...
@echo In case of Subprogram Too Complex warnings,
@echo add -qmaxmem=6000 to CFLAGS.
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DAIXRS -DTCPSOCKET -DSVR4 -DDIRENT -DCK_ANSIC -DNOREALPATH \
-DCLSOPN -DCK_CURSES -DSELECT_H -DNOTTYLOCK -O $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS=-lcurses"
aix32:
$(MAKE) rs6aix32c KTARGET=$${KTARGET:-$(@)}
#IBM AIX 4.1, 4.1.x on RISC System/6000 or Power Series.
#Generates common binary for all platforms if using xlc (IBM C compiler).
#When using gcc, add -mcpu=common to generate common binary.
#Note that this one needs CK_NEWTERM.
# Add -bbigtoc in case ld fails with TOC overflow.
aix41:
@echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
-DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
-DNOGETUSERSHELL -qmaxmem=16000 -O $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS=-lcurses"
# Add -bbigtoc in case ld fails with TOC overflow.
aix41+krb5+krb4:
@echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
-DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
-DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
-DCK_ENCRYPTION -DCK_DES \
-I/usr/local/include/ \
-DNOGETUSERSHELL -qmaxmem=16000 -O $(KFLAGS)" \
"LNKFLAGS = -s" \
"LIBS = -L/usr/local/lib -lcurses -lkrb4 -ldes425 -lkrb5 \
-lcom_err -lk5crypto"
#IBM AIX 4.1 (Beta) or AIX 4.1.1 for RISC System/6000 or Power Series
# Add -bbigtoc in case ld fails with TOC overflow.
rs6aix41d:
@echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 - debugging...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -g -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
-DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
-DNOGETUSERSHELL -DRLOGCODE -qcheck -qextchk -qinfo -qproto \
-qflag=i:i -langlvl=ansi -qtbtable=full -bnoquiet -qmaxmem=16000 \
$(KFLAGS)" "LNKFLAGS =" "LIBS=-lcurses"
#Old name for "aix41".
rs6aix41c:
$(MAKE) aix41 KTARGET=$${KTARGET:-$(@)}
#IBM AIX 4.1, 4.1.x, or 4.2 on RISC System/6000 or Power Series,
# with X.25 support
#Generates common binary for all platforms if using xlc (IBM C compiler).
#When using gcc, add -mcpu=common to generate common binary.
# Add -bbigtoc in case ld fails with TOC overflow.
aix41x25:
@echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
-DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
-DIBMX25 -DDEBUG -DNOGETUSERSHELL -qmaxmem=16000 -g $(KFLAGS)" \
"LNKFLAGS = -g -bI:/lib/pse.exp" "LIBS=-lcurses -lodm -lcfg"
-@echo "]0;kermit done\c"
#As above but without -g in LNKFLAGS.
# Add -bbigtoc in case ld fails with TOC overflow.
aix41x25o:
@echo Making C-Kermit $(CKVER) for IBM AIX 4.1.1 RS/6000 or PowerPC...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DAIXRS -DAIX41 -DSVR4 -DSTERMIOX -DTCPSOCKET -DDIRENT \
-DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DSELECT -DSELECT_H \
-DIBMX25 -DNODEBUG -DNOGETUSERSHELL -qmaxmem=16000 $(KFLAGS)" \
"LNKFLAGS = -bI:/lib/pse.exp" "LIBS=-lcurses -lodm -lcfg"
-@echo "]0;kermit done\c"
#AIX 4.2 -- Must have CK_NEWTERM or echoing is lost after curses.
# Add -bbigtoc in case ld fails with TOC overflow.
aix42:
@echo Making C-Kermit $(CKVER) for IBM AIX 4.2 or higher...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DAIXRS -DAIX41 -DAIX42 -DSVR4 -DSTERMIOX -DTCPSOCKET \
-DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DCK_NEWTERM -DFNFLOAT \
-DSELECT -DSELECT_H -DNOGETUSERSHELL -qmaxmem=16000 -O $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS=-lcurses -lm"
#AIX 4.3 -- Must NOT have CK_NEWTERM or else C-Kermit hangs after curses.
# -bbigtoc needed on some systems but not others to avoid TOC overflow.
# "man ld" says -bbigtoc makes program run slower.
aix43:
@echo Making C-Kermit $(CKVER) for IBM AIX 4.3 or higher...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DAIXRS -DAIX41 -DAIX43 -DSVR4 -DSTERMIOX -DTCPSOCKET \
-DDIRENT -DCK_ANSIC -DCLSOPN -DCK_CURSES -DSELECT -DSELECT_H \
-DFNFLOAT -DNOGETUSERSHELL -qmaxmem=16000 -bbigtoc -O $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS=-lcurses -lm"
aix44:
$(MAKE) aix42 "KFLAGS=-DAIX44 -qmaxmem=20000 $(KFLAGS)" \
KTARGET=$${KTARGET:-$(@)}
aix45:
$(MAKE) aix42 "KFLAGS=-DAIX45 -qmaxmem=20000 $(KFLAGS)" \
KTARGET=$${KTARGET:-$(@)}
#Bull DPX/2 with BOS/X, like AIX/RS6000
bulldpx2:
@echo Making C-Kermit $(CKVER) for Bull DPX/2 with BOS/X...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DSVR3 -DDIRENT -DCK_ANSIC -DCKTYP_H=<sys/types.h> \
-DCK_POLL -DNOGETUSERSHELL -DCLSOPN -O $(KFLAGS)" \
"LNKFLAGS = -s"
#Sun UNIX 3.5 with gcc 2.3.3.
sunos3gcc:
@echo Making C-Kermit $(CKVER) for Sun UNIX 3.5 and gcc...
$(MAKE) xermit CC=gcc CC2=gcc KTARGET=$${KTARGET:-$(@)} \
CFLAGS="-g -O -DBSD4 -DTCPSOCKET $(KFLAGS)"
#SunOS version 4.0, BSD environment, has saved original euid feature.
# Add "CC=/usr/ucb/cc CC2=/usr/ucb/cc" if necessary.
# Note: Including Unicode crashes the assembler in ckcuni.c.
sunos4:
@echo Making C-Kermit $(CKVER) for SunOS 4.0, BSD environment...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -O -DSUNOS4 -DFNFLOAT -DNOUNICODE $(KFLAGS)" \
"LIBS=-lm"
#As above, but with SunLink X.25 support
sunos4x25:
@echo SunLink X.25 support
$(MAKE) "MAKE=$(MAKE)" sunos4 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(KFLAGS) -DFNFLOAT -DSUNX25" \
"LIBS=-lm"
#SUN OS version 4.1 - 4.1.3, BSD environment, has saved original euid feature.
#Uses Honey DanBer UUCP. Requires presence of /usr/spool/locks directory.
# /var/spool/ should be a symbolic link to /usr/spool/.
# ... or 'make xermit "CC= /usr/ucb/cc " \'
# Note: "xermit" means use the select() version of the CONNECT module.
sunos41:
@echo Making C-Kermit $(CKVER) for SunOS 4.1 / BSD...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNOUNICODE $(KFLAGS)" \
"LIBS= $(LIBS) -lresolv -lm"
#As above, but compile with gcc. Gives 24-32K size reduction
#with gcc 2.1 or 2.2.2. CAUTION: make sure "fixincludes" has been run on
#the include files, so gcc's are in sync with the regular Sun ones!
#This includes the curses library for fullscreen file transfer display.
#NDGPWNAM needed for GCC 2.5.6, not needed for 2.4.0, but it's uncertain
#whether it will do any harm for 2.4.0 compilation -- if so, remove it.
sunos41gcc:
@echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
"CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
-funsigned-char $(KFLAGS)" "LIBS= -lcurses -ltermcap -lresolv -lm"
# As above, but without -funsigned-char so I can see the warnings that
# everybody else will get when they use ANSI compilers that don't have this
# option (gsc = gcc signed char).
sunos41gsc:
@echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
"CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
$(KFLAGS)" "LIBS= -lcurses -ltermcap -lresolv -lm"
#As above but build with ckucon.c rather than ckucns.c for testing.
sunos41wgcc:
@echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
"CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
-funsigned-char $(KFLAGS)" "LIBS= -lcurses -ltermcap -lresolv -lm"
#As above but with ckucon.c rather than ckucns.c (for testing only)
sunos41gccfork:
@echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
"CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
-funsigned-char $(KFLAGS)" "LIBS= -lcurses -ltermcap -lresolv -lm"
#as above but configured for Kerberos IV
sunos41gcc+krb4:
@echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, krb4...
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
"CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
-DTCPSOCKET -DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 \
-DCK_ENCRYPTION -DCK_DES -DCK_CAST -DBIGBUFOK -funsigned-char \
-I/usr/kerberos/include/ \
$(KFLAGS)" \
"LIBS= \
-L/usr/kerberos/lib \
-lcurses -ltermcap -lresolv -lm -lkrb -ldes"
#as above but configured for SSL/TLS
sunos41gcc+openssl:
@echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, ssl...
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
"CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
-DCK_AUTHENTICATION -funsigned-char \
-DCK_SSL -DTCPSOCKET -DBIGBUFOK \
-I/w/jaltman2/ssl/openssl-0.9.4/include/ \
$(KFLAGS)" \
"LIBS= \
-L/w/jaltman2/ssl/openssl-0.9.4/ \
-lcurses -ltermcap -lresolv -lm -lssl -lcrypto"
#as above but configured for Kerberos IV and SSL/TLS
sunos41gcc+krb4+openssl:
@echo Making C-Kermit $(CKVER) for SunOS 4.1, gcc, curses, krb4...
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
"CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNDGPWNAM -DCK_CURSES -DFNFLOAT \
-DCK_AUTHENTICATION -DCK_KERBEROS -DKRB4 -DCK_ENCRYPTION -DCK_DES \
-DCK_CAST -DCK_SSL -DLIBDES -DTCPSOCKET -DBIGBUFOK -funsigned-char \
-I/usr/kerberos/include/ \
-I/w/jaltman2/ssl/openssl-0.9.4/include/ \
$(KFLAGS)" \
"LIBS= \
-L/usr/kerberos/lib \
-L/w/jaltman2/ssl/openssl-0.9.4/ \
-lcurses -ltermcap -lresolv -lm -lkrb -lssl -lcrypto"
#SUNOS 4.1 as sunos41 above, but also with curses support
sunos41c:
@echo Curses support
$(MAKE) "MAKE=$(MAKE)" sunos41 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(KFLAGS) -DCK_CURSES -DFNFLOAT " \
"LIBS= -lcurses -ltermcap"
#As SunOS 4.1.x, gcc, configured as Internet Kermit Server.
# . NOLOCAL removes capability to make connections
# . TNCODE allows server-side Telnet negotiation.
sunos41giks:
@echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc for IKS...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc" "CC2= gcc" \
"CFLAGS= -O -DSUNOS41 -DNDGPWNAM -DFNFLOAT \
-DNOLOCAL -DTNCODE -DNOPUSH $(KFLAGS)" \
"LIBS= -lm -L/usr/local/lib -lpwent -lm -lresolv"
#SUNOS 4.1 with SunLink X.25 support
sunos41x25:
@echo SunLink X.25 support
$(MAKE) "MAKE=$(MAKE)" wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNOUNICODE -DFNFLOAT -DSUNX25 \
$(KFLAGS)" "LIBS= $(LIBS) -lresolv -lm"
#SUNOS 4.1 with SunLink X.25 support and curses
sunos41x25c:
@echo SunLink X.25 support + curses
$(MAKE) "MAKE=$(MAKE)" wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -O -DSUNOS41 -DHDBUUCP -DNOUNICODE -DFNFLOAT -DSUNX25 \
-DCK_CURSES $(KFLAGS)" "LIBS= $(LIBS) -lcurses -ltermcap -lresolv -lm"
#SUN with Solaris 2.0 = SunOS 5.0.
#Mostly the same as System V R4. Don't use this with later Solaris versions.
solaris20:
@echo 'Making C-Kermit $(CKVER) for Sun with Solaris 2.0 and curses...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DSOLARIS -DDIRENT -DHDBUUCP -DSTERMIOX \
-DTCPSOCKET -DCK_CURSES -DFNFLOAT -DCK_POLL $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lcurses -ltermlib -lm" "LNKFLAGS = -s"
#SUN with Solaris 2.0.
#As above, but built with the gcc compiler from the Cygnus CD-ROM.
solaris20g:
@echo 'Making C-Kermit $(CKVER) for Sun Solaris 2.0, gcc, and curses..'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DSOLARIS -DDIRENT -DHDBUUCP -DSTERMIOX \
-DTCPSOCKET -DCK_CURSES -DCK_POLL -DFNFLOAT $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lcurses -ltermlib -lm" "LNKFLAGS = -s" \
CC=/opt/cygnus-sol2-1.1/bin/gcc CC2=/opt/cygnus-sol2-1.1/bin/gcc
#SunOS 5.1 = Solaris 2.1.
#NOTE: A C compiler is no longer bundled with SunOS 5.1, so to compile C
#programs, you might have to change your PATH to include the directory
#/usr/ccs/bin AFTER the directory containing the compiler. SunPRO C is
#installed by default in /opt/SUNWspro/bin. So a sample PATH might be:
#
# /usr/local/bin:/usr/bin:/opt/SUNWspro/bin:/usr/ccs/bin:\
# /usr/ucb:/usr/sbin:/sbin:.
#
# or:
#
# /usr/openwin/bin:/export/home/SUNWspro/bin:/usr/ccs/bin:/usr/sbin:/usr/bin.
#
#NOTE 2: Compilation with the Apogee C compiler (apcc) might not work,
#because it refuses to allow "-Usun". Reportedly, newer releases of apcc
#(such as 1.057) work OK, use: "make -e sunos51 CC=apcc CC2=apcc".
solaris21:
@echo 'Making C-Kermit $(CKVER) for SunOS 5.x....'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -Usun -DSVR4 -DSOLARIS -DDIRENT -DHDBUUCP -DFNFLOAT \
-DSELECT -DNODEBUG -DSTERMIOX $(KFLAGS)" "LIBS = -lm" "LNKFLAGS = -s"
#C-Kermit for Solaris 2.0-2.4 compiled with gcc, includes curses and TCP/IP.
#Change -O2 to -O if -O2 gives trouble.
#Remove -Usun if it causes trouble.
#Your PATH should start with something like:
# /usr/local/gnu/bin:/usr/ccs/bin:
#Produces a huge executable -- strip with /usr/ccs/bin/strip (not Gnu strip).
#Also don't add "LNKFLAGS = -s" -- strip manually instead.
#Also note: this can NOT be linked statically - Sun makes it impossible.
#And for Solaris 2.4, you might have to replace:
# /usr/local/lib/gcc-lib/i486-sun-solaris2/2.4.5/include/sys/stat.h
#with /usr/include/sys/stat.h.
solaris2xg:
@echo 'Making C-Kermit $(CKVER) for Solaris 2.x with GNU cc...'
@echo 'Please read the comments that accompany the solaris2xg target.'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
"CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
-DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \
"LIBS= -ltermlib -lsocket -lnsl -lm -lresolv"
#ditto but no curses.
solaris2xgnc:
@echo 'Making C-Kermit $(CKVER) for Solaris 2.x with GNU cc...'
@echo 'Please read the comments that accompany the solaris2xg target.'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
"CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DFNFLOAT \
-DDIRENT -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lm -lresolv"
solaris22g:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" solaris2xg \
KTARGET=$${KTARGET:-$(@)}
solaris23g:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" solaris2xg \
KTARGET=$${KTARGET:-$(@)}
#Solaris 2.4 built with gcc
solaris24g:
$(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} \
solaris2xg "KFLAGS=-DSOLARIS24 $(KFLAGS)"
#Solaris 2.5 built with gcc
solaris25g:
$(MAKE) "MAKE=$(MAKE)" solaris2xg KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-funsigned-char -DPOSIX -DSOLARIS25 -DCK_WREFRESH $(KFLAGS)"
#Solaris 2.6 with gcc
solaris26g:
$(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xg \
"KFLAGS=-DPOSIX -DSOLARIS26 -DCK_WREFRESH $(KFLAGS)"
#Solaris 2.6 with gcc, no curses (e.g. because libtermlib is missing).
solaris26gnc:
$(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} solaris2xgnc \
"KFLAGS=-DPOSIX -DSOLARIS26 $(KFLAGS)"
#Solaris 7 with gcc (32-bit)
solaris7g:
$(MAKE) "MAKE=$(MAKE)" solaris2xg KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DPOSIX -DSOLARIS7 -DCK_WREFRESH $(KFLAGS)"
#Solaris 8 with gcc (32-bit)
solaris8g:
$(MAKE) "MAKE=$(MAKE)" solaris2xg KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DPOSIX -DSOLARIS8 -DSOLARIS8 -DCK_WREFRESH $(KFLAGS)"
#Solaris 2.0-2.4, gcc, SunLink X.25 added.
#NOTE: Can't use xermit target with X.25.
solaris2xgx25:
@echo 'Making C-Kermit $(CKVER) for Solaris 2.x + X.25 with GNU cc...'
@echo 'Please read the comments that accompany the solaris2xg entry.'
$(MAKE) wermit CC=gcc CC2=gcc KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -g -O -Usun -DSVR4 -DSOLARIS -DSTERMIOX -DSELECT -DSUNX25 \
-DCK_CURSES -DCK_NEWTERM -DDIRENT -DHDBUUCP -DTCPSOCKET -DFNFLOAT \
$(KFLAGS)" \
"LIBS= -ltermlib -lm -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
-lsockx25 -lsocket -lnsl"
#Solaris 2.5, gcc, SunLink X.25 added.
solaris25gx25:
$(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} \
solaris2xg "KFLAGS=-DPOSIX -DSOLARIS25 -DCK_WREFRESH $(KFLAGS)"
#Solaris 2.6, gcc, SunLink X.25 added.
solaris26gx25:
$(MAKE) "MAKE=$(MAKE)" KTARGET=$${KTARGET:-$(@)} \
solaris2xg "KFLAGS=-DPOSIX -DSOLARIS26 -DCK_WREFRESH $(KFLAGS)"
#Solaris 2.0-2.4, SunPro compiler, includes curses and TCP/IP.
#When using SUNWspro CC 2.0.1 under Solaris 2.3, be sure all cc patches
#are applied, otherwise corrupt or truncated object files can result.
#To build, set your PATH as follows:
# /usr/local/bin:/usr/bin:/opt/SUNWspro/bin:/usr/ccs/bin:\
# /usr/ucb:/usr/sbin:/sbin:.
# or (depending on where the compiler has been installed):
# /usr/openwin/bin:/export/home/SUNWspro/bin:/usr/ccs/bin:/usr/sbin:/usr/bin.
#For additional optimization try using "-fast -xO4 -xdepend".
solaris2x:
@echo 'Making C-Kermit $(CKVER) for Solaris 2.x with SunPro cc...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -Usun -i -DSVR4 -DDIRENT -DSOLARIS -DHDBUUCP -DFNFLOAT \
-DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv"
solaris23:
$(MAKE) "MAKE=$(MAKE)" solaris2x KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(KFLAGS)"
solaris24:
$(MAKE) "MAKE=$(MAKE)" solaris2x KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DSOLARIS24 $(KFLAGS)"
# template for Solaris 2.5 and above.
solaris25x:
@echo 'Making C-Kermit $(CKVER) for Solaris 2.x with SunPro cc...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DFNFLOAT -O -Usun -i $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS= -ltermlib -lsocket -lnsl -lm -lresolv"
#Solaris 2.5, SunPro compiler, curses, TCP/IP
solaris25:
$(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DSOLARIS25 $(KFLAGS)"
#Solaris 2.6, SunPro compiler, curses, TCP/IP
solaris26:
$(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DSOLARIS26 $(KFLAGS)"
#Solaris 7 (aka 2.7)
solaris7:
$(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DSOLARIS7 $(KFLAGS)"
#Solaris 8
solaris8:
$(MAKE) "MAKE=$(MAKE)" solaris25x KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DSOLARIS8 -DSOLARIS7 $(KFLAGS)"
#Solaris 2.0-2.3, SunPro compiler, with SunLink X.25 support.
#This will only run if user has /opt/SUNWconn/lib/libsockx25.so.1
#exists and can be dynamically linked.
#NOTE: Do not change target to xermit -- it doesn't support X.25.
solaris2x25:
@echo 'Making C-Kermit $(CKVER) for Solaris 2.x+X.25 with SunPro cc...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS -DDIRENT \
-DSUNX25 -DTCPSOCKET -DHDBUUCP -DFNFLOAT \
-DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX $(KFLAGS)" \
"LNKFLAGS = -s" \
"LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
-lsockx25 -lsocket -lnsl -lm -lresolv"
#Solaris 2.4, SunPro compiler, with SunLink X.25 support.
#This will only run if user has /opt/SUNWconn/lib/libsockx25.so.1
#exists and can be dynamically linked.
solaris24x25:
@echo 'Making C-Kermit $(CKVER) for Solaris 2.4+X.25 with SunPro cc...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS -DSOLARIS24 -DDIRENT \
-DSUNX25 -DTCPSOCKET -DHDBUUCP -DFNFLOAT \
-DSELECT -DCK_CURSES -DCK_NEWTERM -DSTERMIOX $(KFLAGS)" \
"LNKFLAGS = -s" \
"LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
-lsockx25 -lsocket -lnsl -lm -lresolv"
#Solaris 2.5, SunPro compiler, with SunLink X.25 support.
solaris25x25:
@echo 'Making C-Kermit $(CKVER) for Solaris 2.5+X.25 with SunPro cc...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS -DSOLARIS25 -DDIRENT -DSUNX25 \
-DTCPSOCKET -DHDBUUCP -DPOSIX -DCK_WREFRESH -DSELECT -DCK_CURSES \
-DCK_NEWTERM -DSTERMIOX -DFNFLOAT -I/opt/SUNWconn/include $(KFLAGS)" \
"LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
-lsockx25 -lsocket -lnsl -lm -lresolv"
#Solaris 2.6, SunPro compiler, with SunLink X.25 support.
solaris26x25:
@echo 'Making C-Kermit $(CKVER) for Solaris 2.6+X.25 with SunPro cc...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -i -Usun -DSVR4 -DSOLARIS -DSOLARIS26 -DDIRENT -DSUNX25 \
-DTCPSOCKET -DHDBUUCP -DPOSIX -DCK_WREFRESH -DSELECT -DCK_CURSES \
-DCK_NEWTERM -DSTERMIOX -DFNFLOAT -I/opt/SUNWconn/include $(KFLAGS)" \
"LIBS= -ltermlib -L/opt/SUNWconn/lib -R/opt/SUNWconn/lib \
-lsockx25 -lsocket -lnsl -lm -lresolv"
#The following sunosxxx entries are for debugging and testing only.
sunos41x:
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -O -DSUNOS41 -DDIRENT -DNOTLOG -DNOMSEND \
-DNOUUCP -DNOSIGWINCH -DNOREDIRECT -DNOPUSH -DNOCCTRAP \
-DNOICP -DNOLOCAL $(KFLAGS)"
#SunOS 4.1.x, debugging with Pure Software, Inc., Purify 2 (commercial runtime
#error-detection software for catching wild array references, etc).
#Before running the resulting wermit, you'll also need to define and export
#the following environment variables (as in this example):
#PURIFYHOME=/usr/local/purify ; export PURIFYHOME
#PURIFYCACHEDIR=/tmp ; export PURIFYCACHEDIR
sunos41cp:
@echo Making C-Kermit $(CKVER) for SunOS 4.1 / BSD / Curses / Purify...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CC2= purify -cache_dir=/usr/tmp cc" \
"CFLAGS= -g -DSUNOS41 -DHDBUUCP -DDIRENT -DTCPSOCKET \
-DSAVEDUID -DCK_CURSES $(KFLAGS)" \
"LIBS= -lcurses -ltermcap"
#SunOS 4.1 with malloc debugger
sunos41md:
@echo Making C-Kermit $(CKVER) for SunOS 4.1 malloc debug...
$(MAKE) mermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -O -DSUNOS41 -DHDBUUCP -DDIRENT -DTCPSOCKET \
-DSAVEDUID $(KFLAGS) -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG"
sunos41gmd:
@echo Making C-Kermit $(CKVER) for SunOS 4.1 with gcc and curses...
$(MAKE) mermit KTARGET=$${KTARGET:-$(@)} "CC= gcc " "CC2= gcc" \
"CFLAGS= -g -DSUNOS41 -DHDBUUCP -DDIRENT -DTCPSOCKET \
-DNDGPWNAM -DSAVEDUID -DCK_CURSES -DRLOGCODE \
$(KFLAGS) -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG" \
"LIBS= -lcurses -ltermcap"
#SunOS version 4.1, gcc, profiling with gprof, no debugging.
#To get profile, "make sunos4p" (on Sun), then "./wermit". After running
#wermit, "gprof ./wermit | lpr" (or whatever) to get execution profile.
sunos41p:
@echo Making C-Kermit $(CKVER) for SunOS 4.x with profiling...
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC= gcc " "CC2= gcc" \
"CFLAGS= -DSUNOS41 -DNODEBUG -DSAVEDUID -DDIRENT -DTCPSOCKET \
-DNDGPWNAM $(KFLAGS) -pg" "LNKFLAGS = -pg"
#SunOS version 4.1 or later, BSD environment, minimum features.
sunos41min:
@echo Minimum interactive
$(MAKE) "MAKE=$(MAKE)" sunos41 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DNOSPL -DNOXMIT -DNOMSEND -DNOFRILLS -DNORETRY \
-DNODIAL -DNOHELP -DNODEBUG -DNOTLOG -DNOSCRIPT -DNOCSETS \
-DNOSHOW -DNOSETKEY -DNOUUCP -DNORECALL -DNOREDIRECT \
-DNOPUSH -DNOMDMHUP -DNOJC -DNOFDZERO -DNOESCSEQ \
-DNONET -DCK_SMALL -DNOPUSH -DNOCKSPEED -DNOCKTIMERS -DNOLOGIN \
-DNOCKXYZ -DNOKERBEROS -DNOMKDIR -DNOPATTERNS -DNOPERMS -DNOPIPESEND \
-DNORECURSIVE -DNORENAME -DNORESEND -DNOSETKEY \
-DNOTRIGGER -DNOTUNING $(KFLAGS)" "LNKFLAGS = -s"
#SunOS version 4.1, BSD environment, min size, command-line only...
sunos41m:
@echo Minimum size
$(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DNOICP $(KFLAGS)"
#SunOS version 4.1, BSD environment, min size, cmd-line only, remote only...
#
sunos41mr:
@echo Minimum size
$(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DNOICP -DNOLOCAL $(KFLAGS)"
#SunOS version 4.1, BSD environment, min size, interactive...
sunos41mi:
@echo Minimum size
$(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DNOCMDL $(KFLAGS)"
#SunOS version 4.1, BSD environment, min size, interactive, remote only...
sunos41mir:
@echo Minimum size
$(MAKE) "MAKE=$(MAKE)" sunos41min KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DNOCMDL -DNOLOCAL $(KFLAGS)"
#SunOS 4.1, System V R3 environment (-i option omitted).
sunos41s5:
@echo Making C-Kermit $(CKVER) for SunOS 4.1 System V R3...
@echo For testing purposes only - NOT for production use.
@echo For a useable version, make sunos41 instead.
$(MAKE) wermit "CC= /usr/5bin/cc " "CC2=/usr/5bin/cc " \
KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSUN4S5 -DDIRENT -DHDBUUCP -DCK_POLL $(KFLAGS) -O"
#As above, but with curses support
sunos41s5c:
@echo Making C-Kermit $(CKVER) for SunOS 4.1 System V R3...
@echo Curses included.
@echo For testing purposes only - NOT for production use.
@echo For a useable version, make sunos41 instead.
$(MAKE) wermit "CC= /usr/5bin/cc " "CC2=/usr/5bin/cc " \
KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSUN4S5 -DDIRENT -DHDBUUCP \
-DCK_POLL -DCK_CURSES -DCK_NEWTERM $(KFLAGS) -O" "LIBS= -lcurses"
#As above, but with curses support AND net support
sunos41s5tcpc:
@echo Making C-Kermit $(CKVER) for SunOS 4.1 System V R3...
@echo TCP/IP and curses included. No debug log.
@echo For testing purposes only - NOT for production use.
@echo For a useable version, make sunos41 instead.
$(MAKE) xermit "CC= /usr/5bin/cc " "CC2=/usr/5bin/cc " \
KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSUN4S5 -DDIRENT -DHDBUUCP -DCK_POLL \
-DNODEBUG -DCK_CURSES -DCK_NEWTERM -DTCPSOCKET $(KFLAGS) -O" \
"LIBS= -lcurses -lresolv"
# (End of SunOS test entries...)
#Apollo with Domain SR10.0 or later, BSD environment
#Reportedly, it might also help to add '-A,systype=bsd4.3' to CFLAGS.
#Reportedly, there is also a problem with getc & putc macros that can
#be handled by using '#ifdef apollo' somewhere to redefine them???
#On the other hand, other reports indicate that it works fine as-is.
#NOTE: This entry was previously like this:
# $(MAKE) wermit "CFLAGS= -DNOFILEH -DBSD4 $(KFLAGS) -Uaegis \
# -DTCPSOCKET -U__STDC__"
#Reports (Dec 91) indicate SR10 has an ANSI-compliant C compiler,
#in addition to an older one that claimed to be ANSI-compliant but wasn't.
#The following make entry (plus checks that are made in ckcdeb.h) detect
#which compiler is used and define the CK_ANSIC or NOANSI flags accordingly.
sr10-bsd:
@echo Making C-Kermit $(CKVER) for Apollo SR10.0 / BSD ...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -O -DAPOLLOSR10 -DBSD43 -DTCPSOCKET -DCK_CURSES \
-Uaegis $(KFLAGS)" "LIBS= -lcurses -ltermcap"
#Apollo with Domain SR10.0 or later, System V R3 environment.
#Don't use the optimizer (-O), it causes problems at runtime.
sr10-s5r3:
@echo Making C-Kermit $(CKVER) for Apollo SR10.0 / Sys V R3 ...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DNOFILEH -DSVR3 -DAPOLLOSR10 $(KFLAGS) -Uaegis -U__STDC__"
#Apollo Domain/IX (untested, try this if sr10-bsd doesn't work)
# -DTCPSOCKET can probably be added here.
apollobsd:
@echo Making C-Kermit $(CKVER) for Apollo Domain/IX...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CC= /bin/cc " "CC2= /bin/cc " \
"CFLAGS= -DNOFILEH -DBSD4 -DAPOLLOBSD $(KFLAGS) -Uaegis"
#Version 7 Unix (see comments near top of makefile)
v7:
@echo Making C-Kermit $(CKVER) for UNIX Version 7.
@echo Read the makefile if you have trouble with this...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS=-DV7 -DPROCNAME=\\\"$(PROC)\\\" \
-DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \
-DNPTYPE=$(NPTYPE) $(DIRECT) -DO_RDWR=2 -DO_NDELAY=0 -DO_SCCS_ID \
$(KFLAGS)"
#AT&T UNIX System V R3, signal() is void rather than int.
#Uses dirent.h and Honey DanBer UUCP.
#Add the -i link option if necessary.
#If you get errors like "ws_row undefined" in ckutio.c, add -DNONAWS.
sys5r3:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP $(KFLAGS) -O" \
"LNKFLAGS="
#As above, plus curses.
sys5r3c:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3 + curses...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DCK_CURSES $(KFLAGS) -O" \
"LNKFLAGS=" "LIBS = -ltermlib"
iclsys5r3:
make sys5r3 KTARGET=$${KTARGET:-$(@)} KFLAGS=-DICLSVR3
#AT&T UNIX System V R3. As above, but no ANSI prototyping.
sys5r3na:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -DNOANSI $(KFLAGS) -O" \
"LNKFLAGS="
#AT&T UNIX System V R3, for 3B computers with Wollongong TCP/IP.
sys5r3net3b:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX SVR3/3B/Wollongong...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DWOLLONGONG $(KFLAGS) \
-O" "LIBS= -lnet -lnsl_s" "LNKFLAGS ="
#AT&T UNIX System V R3, signal() is void rather than int.
#Uses dirent.h and Honey DanBer uucp, has <termiox.h>.
#Has <termiox.h> for RTS/CTS flow control.
sys5r3tx:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DTERMIOX $(KFLAGS) -i -O" \
"LNKFLAGS ="
#AT&T UNIX System V R3, signal() is void rather than int.
#Uses dirent.h and Honey DanBer uucp, has <termiox.h>.
#Has <sys/termiox.h> for RTS/CTS flow control.
sys5r3sx:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R3...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DSTERMIOX $(KFLAGS) -i -O" \
"LNKFLAGS ="
#AT&T UNIX System V R4.
#Has <termiox.h>.
sys5r4:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DTERMIOX $(KFLAGS)" \
"LNKFLAGS = -s"
#AT&T UNIX System V R4 with Wollongong TCP/IP.
#Has <termiox.h>.
sys5r4net:
@echo 'Making C-Kermit $(CKVER) for System V R4 + Wollongong TCP/IP...'
@echo ' If sockets-library routines are missing at link time, then'
@echo ' try the sys5r4net2 entry.'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
-DTERMIOX -DWOLLONGONG $(KFLAGS)" "LNKFLAGS = -s"
#As above, but needs libs included.
sys5r4net2:
@echo ' PLEASE READ ckuins.txt IF YOU GET MISSING HEADER FILES.'
@echo ' (Search for WOLLONGONG...)'
$(MAKE) sys5r4net KTARGET=$${KTARGET:-$(@)} "LIBS= -lsocket -lnsl"
#As above plus curses.
sys5r4net2c:
echo 'Making C-Kermit $(CKVER) for System V R4 + Wollongong TCP/IP...'
@echo ' PLEASE READ ckuins.txt IF YOU GET MISSING HEADER FILES.'
@echo ' (Search for WOLLONGONG...)'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
-DTERMIOX -DWOLLONGONG -DCK_CURSES $(KFLAGS)" "LNKFLAGS = -s" \
"LIBS= -lsocket -lnsl -lcurses"
#DELL UNIX System V R4.
#Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
#are not misplaced in sys (rather than netinet and arpa, respectively).
#Uses ANSI C constructs, advisory file locking on devices, etc.
#Warning: -DSTERMIOX enables hardware flow control (RTS/CTS), but reportedly
#this does not work with the normal drivers. However, it might still work
#on non-Dell systems, or even Dell systems with different drivers installed.
dellsys5r4:
@echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT -DHDBUUCP \
-DTCPSOCKET -DSTERMIOX -DCK_POLL $(KFLAGS)" \
"LIBS= -lsocket -lnsl" "LNKFLAGS = -s"
#As above, curses support added...
dellsys5r4c:
@echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT -DHDBUUCP \
-DTCPSOCKET -DSTERMIOX -DCK_CURSES -DCK_POLL \
$(KFLAGS)" "LIBS= -lsocket -lnsl -lcurses -ltermcap" "LNKFLAGS = -s"
#Mininum interactive: As above, but with every conceivable option removed.
dellsys5r4mi:
@echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...'
@echo 'Minimum-size interactive'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT \
-UTCPSOCKET -DNOCMDL -DNOSPL -DNOXMIT -DCK_POLL \
-DNOMSEND -DNOFRILLS -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
-DNOSCRIPT -DNOCSETS -DNOSHOW -DNOSETKEY -DNOSERVER -DNOUUCP \
-DNOPUSH -DNOMDMHUP -DNOJC -DNOFDZERO -DNOESCSEQ \
$(KFLAGS)" "LNKFLAGS = -s"
#Command-line only version.
dellsys5r4m:
@echo 'Making C-Kermit $(CKVER) for DELL UNIX System V R4...'
@echo 'Command-line only'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDELL_SVR4 -DDIRENT \
-UTCPSOCKET -DNOICP -DNOFRILLS -DNODIAL -DNODEBUG -DNOTLOG -DNOCSETS \
-DNOSETKEY -DNOESCSEQ -DNOJC -DNOFDZERO -DCK_POLL \
$(KFLAGS)" "LNKFLAGS = -s"
#AT&T UNIX System V R4.
#Has <sys/termiox.h>.
sys5r4sx:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DSTERMIOX $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS=$(LIBS)"
#AT&T UNIX System V R4.
#Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
#are not misplaced in sys (rather than netinet and arpa, respectively).
#Uses ANSI C constructs, <sys/termiox.h>, etc etc.
sys5r4sxtcp:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
-DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
"LIBS= -lsocket -lnsl $(LIBS)" "LNKFLAGS= -s"
#AT&T UNIX System V R4.
#As above + curses.
sys5r4sxtcpc:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
-DSTERMIOX -DCK_CURSES -DTCPSOCKET $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lcurses -ltermcap $(LIBS)" "LNKFLAGS = -s"
#AT&T UNIX System V R4. CONSENSYS SVR4.2-1.
#Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
#are not misplaced in sys (rather than netinet and arpa, respectively).
#Uses ANSI C constructs, <sys/termiox.h>, etc.
# Fullscreen -DCK_CURSES added (with curses & termcap libs)
# Submission by Robert Weiner/Programming Plus, rweiner@watsun.cc.columbia.edu
sys5r4sxtcpf:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
-DSTERMIOX -DTCPSOCKET -DCK_CURSES $(KFLAGS)" \
"LIBS= -lsocket -lnsl -L/usr/ccs/lib -lcurses -ltermcap" \
"LIBS=$(LIBS)" "LNKFLAGS = -s"
#Smallest possible version for System V R4
s5r4m:
@echo Minimum size
$(MAKE) "MAKE=$(MAKE)" sys5r4sx KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(KFLAGS) -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
-DNOSCRIPT -DNOCSETS -DNOICP -DNOMSEND -UTCPSOCKET" "LNKFLAGS = -s"
#Smallest possible interactive version of above
s5r4mi:
@echo Minimum interactive
$(MAKE) "MAKE=$(MAKE)" sys5r4sx \
"KFLAGS=-DNOSPL -DNOXMIT -DNOMSEND -DNOFRILLS -DNOSHOW \
-DNODIAL -DNOHELP -DNODEBUG -DNOTLOG -DNOSCRIPT -DNOCSETS -DNOSETKEY \
-UTCPSOCKET $(KFLAGS)" "LNKFLAGS = -s"
#AT&T UNIX System V R4, has <sys/termiox.h>
#ANSI C function prototyping disabled.
sys5r4sxna:
@echo No ANSI C prototyping...
$(MAKE) "MAKE=$(MAKE)" sys5r4sx KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(KFLAGS) -DNOANSI"
#Stratus FTX.
ftx:
@echo 'Making C-Kermit $(CKVER) for Stratus FTX 3.x...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DFTX -DDIRENT -DHDBUUCP -DSTERMIOX
-DNOGETUSERSHELL +DA1.1 $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS=$(LIBS)"
#Stratus FTX + TCP/IP.
ftxtcp:
@echo 'Making C-Kermit $(CKVER) for Stratus FTX 3.x...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DFTX -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
-DSTERMIOX -DTCPSOCKET -DNO_DNS_SRV +DA1.1 $(KFLAGS)" \
"LIBS= -lsocket -lnsl $(LIBS)" "LNKFLAGS= -s"
#NCR MP-RAS 2.03 or 3.02
mpras:
@echo 'Making C-Kermit $(CKVER) for NCR MP-RAS...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DNCRMPRAS -DDIRENT -DHDBUUCP -DSTERMIOX \
-DNOGETUSERSHELL -DNO_DNS_SRV $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS=$(LIBS)"
#NCR MP-RAS 2.03 or 3.02 with TCP/IP and curses
mprastcpc:
@echo 'Making C-Kermit $(CKVER) for NCR MP-RAS + TCP/IP + curses...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CFLAGS=-DTCPSOCKET \
-DCK_CURSES -DSVR4 -DNCRMPRAS -DDIRENT -DHDBUUCP -DSTERMIOX \
-DNOGETUSERSHELL -DNO_DNS_SRV -O $(KFLAGS)" "LNKFLAGS = -s" \
"LIBS= -lsocket -lnsl -lcurses -ltermcap $(LIBS)"
#SINIX-L V5.41 - includes curses, tcp/ip - Use this one for i386.
#This version of SINIX doesn't like fdopen() or popen().
sinix541:
@echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf SINIX V5.41/i386'
$(MAKE) ckcpro.$(EXT) "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP \
-DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DNO_DNS_SRV \
-DSNI541 -DNOGETUSERSHELL -DNONETCMD -DNOPOPEN -kansi -W0 $(KFLAGS)"
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DNO_DNS_SRV -DNOPOPEN \
-DFNFLOAT -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC \
-DSNI541 -DNOGETUSERSHELL -DNONETCMD -kansi -W0 -O $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" "LNKFLAGS = -s"
sinix541i:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sinix541
#SINIX V5.42 - includes curses, tcp/ip, everything - Use this one for MIPS.
# As of C-Kermit 6.1, optimizer can't handle ckcpro.c.
sinix542:
@echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf SINIX V5.42...'
$(MAKE) ckcpro.$(EXT) "CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP \
-DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DNO_DNS_SRV \
-DSNI542 -DNOGETUSERSHELL -kansi -W0 $(KFLAGS)"
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DNO_DNS_SRV \
-DFNFLOAT -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC \
-DSNI542 -DNOGETUSERSHELL -kansi -W0 -O -KOlimit,2400 $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" "LNKFLAGS = -s"
#SINIX V5.42 - includes curses, tcp/ip, everything - Use this one for Intel.
# (Note: SNI discontinued Intel support after 5.42.)
sinix542i:
@echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf SINIX-Z V5.42...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSINIX -DSVR4 -DDIRENT -DHDBUUCP -DFNFLOAT -DSTERMIOX \
-DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DNO_DNS_SRV -kansi \
-DSNI542 $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lcurses -ltermcap -lm" \
"LNKFLAGS = -s"
#Siemens Nixdorf Reliant UNIX V5.43 - includes curses, tcp/ip, everything:
# . gettimeofday() suddenly has only one arg instead of two (GTODONEARG).
# . The syntax of the Olimit specifier changed.
# . The name was changed from SINIX to Reliant UNIX in version 5.43C.
sni543:
@echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf Reliant UNIX V5.43'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSINIX -DSNI543 -DSVR4 -DDIRENT -DHDBUUCP \
-DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DGTODONEARG \
-DNO_DNS_SRV -kansi -W0 -O -F Olimit,3100 $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lcurses -ltermcap" "LNKFLAGS = -s"
#Siemens Nixdorf Reliant UNIX V5.44 - Like 5.43 but with different banner.
sni544:
@echo 'Making C-Kermit $(CKVER) for Siemens/Nixdorf Reliant UNIX V5.44'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSINIX -DSNI544 -DSVR4 -DDIRENT -DHDBUUCP \
-DSTERMIOX -DCK_CURSES -DTCPSOCKET -DSELECT -DCK_ANSIC -DGTODONEARG \
-DNO_DNS_SRV -kansi -W0 -O -K Olimit,3100 $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lcurses -ltermcap" "LNKFLAGS = -s"
#Commodore Amiga with AT&T UNIX System V R4 and TCP/IP support.
#Has <sys/termiox.h>.
svr4amiganet:
@echo 'Making C-Kermit $(CKVER) for Amiga SVR4 + TCP/IP...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC=gcc" "CC2=gcc" \
"CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DSTERMIOX \
-DTCPSOCKET -DCK_CURSES $(KFLAGS)" "LNKFLAGS = -s" \
"LIBS = -lsocket -lnsl -ltermlib"
#SCO (Novell (Univel)) UnixWare 1.x or 2.0, no TCP/IP.
#This assumes the Novell SDK 1.0, which has <sys/termiox.h>.
#UnixWare users with the "Prime Time Freeware" CD-ROM SDK will probably have
#to use the sys5r4 entry (no termiox.h file, so no hardware flow control).
#Change -DSELECT to -DCK_POLL if -DSELECT causes problems.
# NOTE: Unixware 1.x builds have not been tried in C-Kermit 7.0.
unixware:
$(MAKE) "MAKE=$(MAKE)" sys5r4sx KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DOLD_UNIXWARE -DCK_NEWTERM -DSELECT -DNOGETUSERSHELL \
-DNOSYSLOG $(KFLAGS)" "LIBS=-lcrypt"
#UnixWare 1.x or 2.0 with TCP/IP and curses.
#fork()-based CONNECT - no high serial speeds.
unixwarenetc:
$(MAKE) "MAKE=$(MAKE)" sys5r4sxtcpc KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DOLD_UNIXWARE -DCK_NEWTERM -DSELECT -DNOGETUSERSHELL \
-DNOSYSLOG $(KFLAGS)" "LIBS=-lcrypt -lresolv"
uw10:
$(MAKE) unixwarenetc KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
#This is for Unixware 2.0.x only - use unixware21 for UW 2.1.x.
#Has special library search and enables special kludge around library
#foulup regarding vfork() (which Kermit doesn't use). Forces POSIX-style
#hangup.
unixware20:
@echo 'Making C-Kermit $(CKVER) for UnixWare 2.0.x...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DOLD_UNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP \
-DBIGBUFOK -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET \
-DUW200 -DFNFLOAT -DCK_NEWTERM -DNOSYSLOG -DHUP_POSIX $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lcurses -ltermcap -lcrypt -lgen -lm -lresolv" \
"LNKFLAGS = -s"
uw20:
$(MAKE) unixware20 KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
#Adds big buffers ("large memory model") - otherwise the same as UnixWare 1.x.
unixware21:
@echo 'Making C-Kermit $(CKVER) for UnixWare 2.1.x...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
-DNOGETUSERSHELL -DNOSYSLOG -DSTERMIOX -DCK_CURSES -DTCPSOCKET \
-DCK_NEWTERM -DFNFLOAT $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv \
$(LIBS)" "LNKFLAGS = -s"
uw21:
$(MAKE) unixware21 KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
#Unixware 2.1 with IKSD support
uw21iksd:
$(MAKE) unixware21 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DCK_SHADOW $(KFLAGS)" "LIBS= -lgen"
#UnixWare 7 with tc[gs]etspeed() high serial speeds & select()-based CONNECT
#NOTE: This is the one we use.
unixware7t:
@echo 'Making C-Kermit $(CKVER) for UnixWare 7 with POSIX i/o...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
-DFNFLOAT -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DPOSIX \
-DUW7 -DUSETCSETSPEED -DCK_NEWTERM -DNOLSTAT -DDCLTIMEVAL $(KFLAGS)" \
"LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \
"LNKFLAGS = -s"
#UnixWare 7 - select()-based CONNECT - no POSIX i/o - no high serial speeds.
#In other words, just like the UnixWare 1 and 2 builds.
unixware7x:
@echo 'Making C-Kermit $(CKVER) for UnixWare 7...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
-DUW7 -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DNOLSTAT \
-DFNFLOAT -DCK_NEWTERM $(KFLAGS)" \
"LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \
"LNKFLAGS = -s"
#UnixWare 7 with POSIX cfset[oi]speed() to allow high serial speeds.
#(but the high speeds don't work)
unixware7p:
@echo 'Making C-Kermit $(CKVER) for UnixWare 7 with POSIX i/o...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
-DUW7 -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DPOSIX \
-DFNFLOAT -DCK_NEWTERM -DNOLSTAT $(KFLAGS)" \
"LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \
"LNKFLAGS = -s"
# UnixWare 7 built with gcc - This does not work at all...
# Reportedly gcc 2.8.1 is broken on Unixware 7. Try egcs?
unixware7g:
@echo 'Making C-Kermit $(CKVER) for UnixWare 7 with gcc...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CC = gcc" "CC2 = gcc" "LNKFLAGS = -s -shlib"
"CFLAGS = -O -DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
-DUW7 -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DNOLSTAT \
-DFNFLOAT -DCK_NEWTERM $(KFLAGS)" \
"LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv $(LIBS)" \
"LNKFLAGS = -s"
unixware7:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" unixware7t \
KTARGET=$${KTARGET:-$(@)}
uw7:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" unixware7t \
KTARGET=$${KTARGET:-$(@)}
#UnixWare 7 with OpenSSL
uw7ssl:
@echo 'Making C-Kermit $(CKVER) for UnixWare 7 and OpenSSL...'
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DCK_AUTHENTICATION -DCK_SSL -DCK_SHADOW
-DUNIXWARE -DSELECT -DSVR4 -DDIRENT -DHDBUUCP -DBIGBUFOK \
-DFNFLOAT -DNOGETUSERSHELL -DSTERMIOX -DCK_CURSES -DTCPSOCKET -DPOSIX \
-DUW7 -DUSETCSETSPEED -DCK_NEWTERM -DNOLSTAT -DDCLTIMEVAL \
-I/usr/local/ssl/include $(KFLAGS)" \
"LIBS=-lsocket -lnsl -lcurses -ltermcap -lcrypt -lm -lresolv \
-lgen -lcudk70 -L/usr/local/ssl/lib -lssl -lcrypto $(LIBS)" \
"LNKFLAGS = -s"
#As above but includes Shadow password support needed for IKSD.
uw7iksd:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DCK_SHADOW $(KFLAGS)" \
KTARGET=$${KTARGET:-$(@)} "LIBS= -lgen" unixware7t
#As above but links with static API for realpath() so a binary built
#with this target on UW7.1 will also work on 7.0. Requires SCO UDK
#rather than the stock compiler.
uw7iksdudk:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=-DCK_SHADOW $(KFLAGS)" \
KTARGET=$${KTARGET:-$(@)} "LIBS= -lgen -lcudk70" unixware7t
#ESIX SVR4.0.3 or 4.04 with TCP/IP support.
#Has <sys/termiox.h>, ANSI C function prototyping disabled.
#Add -m486 to CFLAGS if desired.
esixr4:
@echo 'Making C-Kermit $(CKVER) for ESIX SVR4 + TCP/IP...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DNOANSI \
-DSTERMIOX -DTCPSOCKET $(KFLAGS)" "LNKFLAGS = -s" \
"LIBS = -lsocket -lnsl"
#AT&T UNIX System V R4.
#Has <sys/termiox.h>, Wollongong WIN/TCP TCP/IP.
sys5r4sxnet:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
-DSTERMIOX -DWOLLONGONG $(KFLAGS)" "LNKFLAGS = -s"
#AT&T UNIX System V R4, no <termio.x> or <sys/termio.x>.
sys5r4nx:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP $(KFLAGS)" \
"LNKFLAGS = -s"
#AT&T UNIX System V R4, no <termio.x> or <sys/termio.x>, curses, TCP/IP.
sys5r4nxnetc:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP \
-DCK_CURSES -DTCPSOCKET $(KFLAGS)" \
"LIBS = -lcurses -lsocket -lnsl -ltcpip" \
"LNKFLAGS = -s"
#AT&T UNIX System V R4, no <termio.x> or <sys/termio.x>, Wollongong TCP/IP.
sys5r4nxtwg:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System V R4...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DDIRENT -DHDBUUCP -DWOLLONGONG $(KFLAGS)"
"LNKFLAGS = -s"
#ICL UNIX System V R4.(DRS N/X) version :-
#UNIX System V Release 4.0 ICL DRS 6000 (SPARC)
#DRS/NX 6000 SVR4 Version 5 Level 1 Increment 4
#Has <sys/termiox.h>, regular Berkeley sockets library, i.e. in.h and inet.h
#are not misplaced in sys (rather than netinet and arpa, respectively).
#Uses ANSI C constructs, advisory file locking on devices, etc.
#Remove -lnsl if it causes trouble.
iclsys5r4:
@echo 'Making C-Kermit $(CKVER) for ICL UNIX System V R4 (DRS N/X)'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DICL_SVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
-DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lresolv " "LNKFLAGS = -s"
#As above but for DRS/NX 4.2MP 7MPlus.
iclsys5r4m+:
@echo 'Making C-Kermit $(CKVER) for ICL UNIX System V R4 DRS/NX 4.2MP+'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DICL_SVR4 -DDIRENT -DHDBUUCP -DNOIKSD \
-DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lm -lc -g -lgen " "LNKFLAGS = -s"
#As above but for DRS/NX 4.2MP 7MPlus with IKSD support.
iclsys5r4m+iksd:
@echo 'Making C-Kermit $(CKVER) for ICL UNIX System V R4 DRS/NX 4.2MP+'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DICL_SVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
-DSTERMIOX -DTCPSOCKET $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lm -lc -g -lgen -lresolv " "LNKFLAGS = -s"
iclsys5r4_486:
$(MAKE) "MAKE=$(MAKE)" iclsys5r4 KTARGET=$${KTARGET:-$(@)}
#Data General DG/UX 4.30 (System V R3) for DG AViiON, with TCP/IP support.
dgux430:
@echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 4.30...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DDGUX430 -DSVR3 -DDIRENT -DTCPSOCKET \
-DNOINADDRX -DNOGETUSERSHELL $(KFLAGS)"
#Data General DG/UX 4.30 for DG AViiON, with TCP/IP support with BSDisms.
dgux430bsd:
@echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 4.30...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DDGUX430 -D_BSD_SOURCE -DBSD4 \
-DNOINADDRX -DTCPSOCKET -DNOGETUSERSHELL $(KFLAGS)"
#Data General DG/UX 5.4 (System V R4) for DG AViiON, with TCP/IP support.
#Add -lsocket -lnsl if inet_addr comes up missing...
#Hmmm - I really think CK_POLL can be removed from this one in which case
#there is no difference between dgux540 and dgux540i.
dgux540:
@echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.40...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \
-DSTERMIOX -DTCPSOCKET -DCK_POLL -DNOGETUSERSHELL $(KFLAGS)"
#Data General DG/UX 5.40 (System V R4) for Intel AViiON, with TCP/IP support.
dgux540i:
@echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.40...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \
-DSTERMIOX -DTCPSOCKET -DNOGETUSERSHELL $(KFLAGS)" \
"LIBS = -lsocket -lnsl"
dgux54:
make dgux540 KTARGET=$${KTARGET:-$(@)}
#Data General DG/UX 5.4 (= System V R4) for DG AViiON, with TCP/IP support.
# And curses.
dgux540c:
@echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.4...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \
-DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
$(KFLAGS)" "LIBS= -lcurses8 -ltermcap" "LNKFLAGS = -s"
#As above but for Intel - only difference is name library names.
dgux540ic:
@echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.40...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DDGUX540 -DDIRENT -DHDBUUCP -DNOINADDRX \
-DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
$(KFLAGS)" "LIBS = -lsocket -lnsl -lcurses -ltermcap"
dgux54c:
make dgux540c KTARGET=$${KTARGET:-$(@)}
#DG/UX 5.4R3.10
dgux54310:
@echo 'Making C-Kermit $(CKVER) for DG AViiON DG/UX 5.4R3...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DDGUX540 -DDGUX54310 -DDIRENT -DHDBUUCP -DSELECT \
-DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
-DNOINADDRX $(KFLAGS)" "LIBS= -lcurses8 -ltermcap" "LNKFLAGS = -s"
#DG/UX 5.4R4.10 - Includes everything.
dgux54410:
@echo 'Making C-Kermit $(CKVER) for DG/UX 5.4R4.10...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DDGUX540 -DDGUX54410 -DDIRENT -DHDBUUCP -DSELECT \
-DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
-DNOINADDRX $(KFLAGS)" "LIBS = -lsocket -lnsl -lcurses -ltermcap"
#DG/UX 5.4R4.11 - Includes everything.
dgux54411:
@echo 'Making C-Kermit $(CKVER) for DG/UX 5.4R4.11...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DDGUX540 -DDGUX54411 -DDIRENT -DHDBUUCP -DSELECT \
-DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
-DNOINADDRX $(KFLAGS)" "LIBS = -lsocket -lnsl -lcurses -ltermcap"
#DG/UX 5.4R4.20 - Includes everything.
dgux54420:
@echo 'Making C-Kermit $(CKVER) for DG/UX 5.4R4.20...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DDGUX540 -DDGUX54420 -DDIRENT -DHDBUUCP -DSELECT \
-DSTERMIOX -DTCPSOCKET -DCK_CURSES -DCK_NEWTERM -DNOGETUSERSHELL \
-DNOINADDRX $(KFLAGS)" \
"LIBS = -lsocket -lresolv -lnsl -lcurses -ltermcap"
#Silicon Graphics System V R3 with BSD file system (IRIS)
iris:
@echo Making C-Kermit $(CKVER) for Silicon Graphics IRIX pre-3.3...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR3 -DLONGFN $(KFLAGS) -I/usr/include/bsd" \
"LIBS = -lbsd"
#Silicon Graphics IRIS System V R3
irix33:
@echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 3.3...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP $(KFLAGS) -O" \
"LNKFLAGS = -s"
#Silicon Graphics Iris Indigo with IRIX 4.0.0 or 5.0...
#Strict ANSI C compilation, TCP/IP support included
irix40:
@echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DPWID_T=uid_t \
-DCK_ANSIC -DTCPSOCKET $(KFLAGS) -O -Olimit 1600 -I/usr/include/bsd" \
"LNKFLAGS = -s"
#As above, but with fullscreen display (curses) and Sun Yellow Pages support.
#NOTE: IRIX versions prior to 5 run COFF binaries.
irix40ypc:
@echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0.'
@echo 'Includes fullscreen file display and Sun Yellow Pages...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DCK_CURSES \
-DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET $(KFLAGS) \
-O -Olimit 1600 -I/usr/include/bsd" \
"LIBS = -lcurses -lsun" "LNKFLAGS = -s"
# Silicon Graphics Iris Series 4D/*, IRIX 4.0.x, -O4 ucode optimized.
# Huge temporary file space needed for ucode optimizer. If you get an error
# like "ugen: internal error writing to /tmp/ctmca08777: Error 0", define the
# the TMPDIR environment variable to point to a file system that has more
# space available, e.g. "setenv TMPDIR /usr/tmp".
irix40u:
@echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DPWID_T=uid_t \
-DCK_ANSIC -DTCPSOCKET $(KFLAGS) -O4 -Olimit 1600" \
"LNKFLAGS=-O4 -Olimit 1600 -s" "EXT=u"
# As above, with Curses Support added
irix40uc:
@echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 4.0...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DIRIX40 -DSVR3 -DDIRENT -DHDBUUCP -DPWID_T=uid_t \
-DCK_ANSIC -DCK_CURSES -DTCPSOCKET $(KFLAGS) -O4 -Olimit 1600" \
"LNKFLAGS=-O4 -Olimit 1600 -s" "EXT=u" "LIBS= -lcurses -ltermcap"
#Silicon Graphics IRIX 5.x.
#Yellow Pages and Curses support included.
#IRIX version 5.x can run COFF or ELF binaries.
irix51:
@echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 5.x'
@echo 'Includes fullscreen file display and Yellow Pages...'
@echo 'Add -mips<n> to CFLAGS specify a particular hardware target.'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DIRIX51 -DSVR4 -DDIRENT -DHDBUUCP -DCK_CURSES -DCK_NEWTERM \
-DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET -DSELECT -DNOGETUSERSHELL \
$(KFLAGS) -O -Olimit 2400" "LIBS = -lcurses" "LNKFLAGS = -s"
irix51ypc:
$(MAKE) "MAKE=$(MAKE)" irix51 KTARGET=$${KTARGET:-$(@)}
#IRIX 5.2 adds RTS/CTS
irix52:
$(MAKE) "MAKE=$(MAKE)" irix51 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DIRIX52 -DCK_RTSCTS"
irix53:
$(MAKE) "MAKE=$(MAKE)" irix51 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DIRIX52 -DIRIX53 -DCK_RTSCTS"
#Silicon Graphics IRIX 6.[024] common stuff.
#Yellow Pages and Curses support included.
#IRIX version 6.0 and later runs only ELF binaries.
#Depends on code changes in ckudeb.h that make -DIRIX6x define all
#lower IRIX6x values and IRIX51.
irix6x:
@echo 'Includes fullscreen file display and Yellow Pages...'
@echo 'Add -mips<n> to specify a particular hardware target.'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
-DCK_CURSES -DCK_NEWTERM -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET \
-DSELECT -DCK_RTSCTS -O $(KFLAGS)" \
"LIBS = -lcurses" "LNKFLAGS = -s $(LNKFLAGS)"
#Silicon Graphics IRIX 6.0.
irix60:
@echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.0'
@$(MAKE) "MAKE=$(MAKE)" \
"KFLAGS=-DIRIX60 -Olimit 2138 $(KFLAGS)" \
irix6x KTARGET=$${KTARGET:-$(@)}
#Silicon Graphics IRIX 6.2.
#Serial speeds > 38400 are available in IRIX 6.2 on O-class machines only.
#Note: Olimit must be a number > 0.
irix62:
@echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.2'
@$(MAKE) "MAKE=$(MAKE)" \
LNKFLAGS="-Wl,-woff,84" \
"KFLAGS=-DIRIX62 -Olimit 4700 $(KFLAGS)" \
irix6x KTARGET=$${KTARGET:-$(@)}
#Silicon Graphics IRIX 6.3.
irix63:
@echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.3'
@$(MAKE) "MAKE=$(MAKE)" irix62 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DIRIX63"
#Silicon Graphics IRIX 6.4.
# -woff,84 to linker stops complaints about no symbols loaded from
# curses, and -woff 1110 stops complaints about unreachable "break;"
# statements in ckcpro.c among others.
# tested on SGI Octane, running IRIX 6.4 up to 115200 bps.
# -Olimit 0 means infinite.
irix64:
@echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.4'
@$(MAKE) "MAKE=$(MAKE)" \
LNKFLAGS="-Wl,-woff,84" \
"KFLAGS=-DIRIX64 -DCK_RTSCTS -Olimit 3000 -woff 1110 $(KFLAGS)" \
irix6x KTARGET=$${KTARGET:-$(@)}
irix64gcc:
@echo 'Making C-Kermit $(CKVER) for Silicon Graphics IRIX 6.4 gcc'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS= -DSVR4 -DIRIX64 -DCK_CURSES -DTCPSOCKET -DNOCOTFMC \
$(KFLAGS) -O" "LIBS= -lcurses -ltermcap -lcrypt"
#Note the new Optimization option syntax for MIPSpro CC 7.2.1.2m.
irix65:
@echo 'Making C-Kermit $(CKVER) for SGI IRIX 6.5'
@$(MAKE) "MAKE=$(MAKE)" \
LNKFLAGS="-Wl,-woff,84" \
"KFLAGS=-DIRIX65 -DCK_RTSCTS -OPT:Olimit=0 -woff 1110 $(KFLAGS)" \
irix6x KTARGET=$${KTARGET:-$(@)}
irix6x+krb5:
@echo 'Includes fullscreen file display and Yellow Pages...'
@echo 'Add -mips<n> to specify a particular hardware target.'
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSVR4 -DDIRENT -DHDBUUCP -DNOGETUSERSHELL \
-DCK_CURSES -DCK_NEWTERM -DPWID_T=uid_t -DCK_ANSIC -DTCPSOCKET\
-DSELECT -DCK_RTSCTS -O \
-DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DCK_ENCRYPTION -DCK_DES \
-I/usr/KRB5/include/ $(KFLAGS)" \
"LIBS = -lcurses -L/usr/KRB5/lib -ldes425 -lkrb5 \
-lcom_err -lcrypto -lcrypt" \
"LNKFLAGS = -s $(LNKFLAGS)"
irix65+krb5:
@echo 'Making C-Kermit $(CKVER) for SGI IRIX 6.5'
@$(MAKE) "MAKE=$(MAKE)" \
LNKFLAGS="-Wl,-woff,84" \
"KFLAGS=-DIRIX65 -DCK_RTSCTS -OPT:Olimit=0 -woff 1110 $(KFLAGS)" \
irix6x+krb5 KTARGET=$${KTARGET:-$(@)}
#In case they type "make sys5"...
sys5:
$(MAKE) "MAKE=$(MAKE)" sys3 KTARGET=$${KTARGET:-$(@)}
#Generic ATT System III or System V (with I&D space)
sys3:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III'
@echo 'or System V R2 or earlier...'
@echo 'add -DNOMKDIR if mkdir is an undefined symbol.'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATTSV -DNOUNICODE -DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL \
-DNOINITGROUPS -DNOFTRUNCATE -DNOREALPATH $(KFLAGS) -i -O" \
"LNKFLAGS = -i"
#Generic ATT System III or System V (no I&D space)
sys3nid:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III'
@echo 'or System V R2 or earlier, no I&D space...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATTSV -DNOREALPATH -DNOUNICODE -DNOSYSLOG -DNOSYMLINK \
-DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE $(KFLAGS) -O" \
"LNKFLAGS ="
#Generic ATT System III or System V R2 or earlier, "no void":
#special entry to remove "Illegal pointer combination" warnings.
sys3nv:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III'
@echo 'or System V R2 or earlier...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DATTSV -DNOREALPATH -DNOUNICODE -DNOSYSLOG -DNOGETUSERSHELL \
-DNOSYMLINK -DNOFTRUNCATE -DNOINITGROUPS -Dvoid=int $(KFLAGS) -i -O" \
"LNKFLAGS = -i"
# AT&T 7300 UNIX PC. As of C-Kermit 6.1, many of these entries don't work
# any more due to "Out of memory" or "Too many defines" errors during
# compilation, at least not on systems without lots of memory. The sys3upcgc
# entry works (using gcc) with optimization removed, and might also work
# with optimization enabled on machines with larger memories.
#AT&T 7300/UNIX PC (3B1) systems, sys3 but special handling for internal modem.
#Link with the shared library -- the conflict with openi in shared library
#is solved with -Dopeni=xopeni. Note that the xermit target can't be used
#for the Unix PC; there is no select().
sys3upc:
@echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, shared lib...'
@echo 'If shared lib causes trouble, use make sys3upcold.'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DATT7300 -DNOMKDIR -DUSE_MEMCPY -DNOREALPATH \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DNOREDIRECT -DNOGFTIMER -DNOUNICODE $(KFLAGS) -Dopeni=xopeni" \
"CC2 = ld /lib/crt0s.o /lib/shlib.ifile" "LNKFLAGS = -s"
#AT&T 7300/Unix PC systems, minimum kermit for those with smaller amounts
#of memory.
sys3upcm:
@echo Minimum interactive
$(MAKE) "MAKE=$(MAKE)" sys3upc KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DNOSPL -DNOFRILLS -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS \
-DNOSYSLOG -DNOSETKEY -DNOREALPATH"
#AT&T 7300/UNIX PC (3B1) systems, with curses support.
#Curses and the shared library don't get along, so we don't use the
#shared library. We need to include CK_NEWTERM to avoid a conflict
#with curses and buffering on stdout. Merged with submission by
#Robert Weiner/Programming Plus, rweiner@watsun.cc.columbia.edu.
#We don't need -Dopeni=xopeni since we're not using the shared library,
#but we keep it to be consistent with the other entries.
sys3upcc:
@echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, curses...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DATT7300 -DNOREALPATH \
-DCK_CURSES -DCK_NEWTERM -DNOMKDIR -DNOREDIRECT -DNOGFTIMER \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DUSE_MEMCPY -DNOUNICODE $(KFLAGS) -Dopeni=xopeni" \
"LIBS = -lcurses" "LNKFLAGS = -s"
#Like sys3upcc but for AT&T UNIX 3.51m (released as a patch on Fix Disk 2),
#adds hardware flow control.
att351m:
$(MAKE) "MAKE=$(MAKE)" sys3upcc KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DCK_RTSCTS -DUNIX351M"
#As above but with gcc.
att351gm:
$(MAKE) "MAKE=$(MAKE)" sys3upcgc KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DCK_RTSCTS -DUNIX351M"
#AT&T 7300 UNIX PC (3B1), as above, but no newterm().
sys3upcx:
@echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, curses...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DATT7300 -DNOREALPATH -DNOUNICODE \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DCK_CURSES -DNOMKDIR -DNOREDIRECT -DNOGFTIMER -DUSE_MEMCPY $(KFLAGS) \
-Dopeni=xopeni" "LIBS = -lcurses -ltermcap" "LNKFLAGS = -s"
#AT&T 7300/UNIX PC (3B1) systems, with curses and shared library support.
sys3upcshcc:
@echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, shared lib...'
@echo 'With curses. Requires shcc.'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DATT7300 -DNOMKDIR -DNOREALPATH \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DCK_NEWTERM -DCK_CURSES -DNOREDIRECT -DNOGFTIMER \
-DUSE_MEMCPY -DNOUNICODE $(KFLAGS) -Dopeni=xopeni" \
"LNKFLAGS = -i -s" "CC = shcc" "CC2 = shcc" "LIBS = -lcurses"
#AT&T 7300/UNIX PC (3B1) systems, as above, no curses, but use gcc.
sys3upcg:
@echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATT7300 -DNOREDIRECT -DUSE_MEMCPY -DNOUNICODE \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DNOGFTIMER -DNOMKDIR -DNOREALPATH $(KFLAGS) -Dopeni=xopeni" \
"CC = gcc" "CC2 = gcc" "LNKFLAGS = -s -shlib"
#AT&T 7300/UNIX PC (3B1) systems, curses and gcc.
#Optimization omitted -- add it back in if your machine has lots of memory.
sys3upcgc:
@echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC, curses...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATT7300 -DNOREDIRECT -DUSE_MEMCPY -DNOGFTIMER -DNOUNICODE \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DCK_CURSES -DIFDEBUG -DCK_NEWTERM -DNOMKDIR -DNOREALPATH $(KFLAGS)" \
"CC = gcc" "CC2 = gcc" "LIBS = -lcurses" "LNKFLAGS = -s"
#AT&T 7300/UNIX PC (3B1) systems, special handling for internal modem.
#No FULLSCREEN file transfer display (curses).
sys3upcold:
@echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATT7300 -DNOMKDIR -DUSE_MEMCPY -DNOUNICODE \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DNOGFTIMER -DNOREDIRECT -DNOREALPATH $(KFLAGS) -O" "LNKFLAGS = -i"
#As above, but with gcc. miminum features - fits on a 400K UNIX PC floppy
#after compression with room to spare; add -DNOSHOW or other -DNOxxxx items
#to reduce size even further.
sys3upcgm:
@echo Minimum interactive
$(MAKE) "MAKE=$(MAKE)" sys3upcg KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DNOSPL -DNOFRILLS -DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS \
-DNOSETKEY $(KFLAGS)"
#This target is designed to create a version with the most features possible
#that, after compression, still fits on a 400K UNIX PC floppy.
sys3upcgfd:
@echo 'Making C-Kermit $(CKVER) for AT&T 7300 UNIX PC floppy...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATT7300 -DNOREDIRECT -DUSE_MEMCPY -DNOSPL \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DNOGFTIMER -DNOREALPATH -Dopeni=xopeni \
-DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS -DNOSETKEY -DNOMKDIR $(KFLAGS)" \
"CC = gcc" "CC2 = gcc" "LNKFLAGS = -s"
#AT&T 6300 PLUS (warning, -O might make it run out of space).
#NOTE: Remove -DHDBUUCP if not using Honey DanBer UUCP.
att6300:
@echo 'Making C-Kermit $(CKVER) for AT&T 6300 PLUS...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATT6300 -DHDBUUCP -DNOFILEH -DNOREALPATH \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DNOUNICODE $(KFLAGS) -O -Ml -i" "LNKFLAGS = -i -Ml"
#As above, but with curses support. Debugging disabled to prevent thrashing.
att6300c:
@echo 'Making C-Kermit $(CKVER) for AT&T 6300 PLUS...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATT6300 -DHDBUUCP -DNOFILEH -DNOCSETS -DNOREALPATH \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DCK_CURSES -DNODEBUG -DNOUNICODE $(KFLAGS) -O -Ml -i" \
"LNKFLAGS = -i -Ml" "LIBS = -lcurses"
#AT&T 6300 PLUS with no curses, no debugging (about 34K smaller)
# -Optimization saves about 20K too.
att6300nd:
@echo 'Making C-Kermit $(CKVER) for AT&T 6300 PLUS, no debugging...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATT6300 -DHDBUUCP -DNODEBUG -DNOFILEH -DNOREALPATH \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DNOUNICODE $(KFLAGS) -O -i -Ml" "LNKFLAGS = -i -Ml"
#AT&T 3B2 and maybe 3B20-series computers running AT&T UNIX System V R3.
#This one was actually used to build C-Kermit 7.0 successfully on a 3B2/300.
att3b2:
@echo 'Making C-Kermit $(CKVER) for AT&T 3B2'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATTSV -DNOREDIRECT -DUSE_MEMCPY \
-DNOTIMEVAL -DNOTIMEZONE -DMINIDIAL -DNOCHANNELIO -DNOBIGBUF \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DNOGFTIMER -DNOREALPATH -Dopeni=xopeni -DNOFRILLS \
-DNOHELP -DNODEBUG -DNOTLOG -DNOCSETS -DNOSETKEY -DNOMKDIR $(KFLAGS)" \
"CC = gcc" "CC2 = gcc" "LNKFLAGS = -s"
# The next two are likely not to work as-is.
#AT&T 3B2, 3B20-series computers running AT&T UNIX System V.
#This is just generic System V with Honey DanBer UUCP, so refer to sys3hdb.
#Remove -DNONAWS if you can get away with it.
att3bx:
$(MAKE) "MAKE=$(MAKE)" sys3hdb KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(KFLAGS) -DNONAWS -DNOTIMEVAL"
# 3Bx with charsets (except Unicode) but no curses.
att3bx1:
@echo 'Making C-Kermit $(CKVER) for AT&T 3B2 or 3B20'
@echo 'with Honey DanBer UUCP no curses...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATTSV -DHDBUUCP $(KFLAGS) -DNOREDIRECT \
-DNOTIMEVAL -DNOTIMEZONE -DMINIDIAL -DNOCHANNELIO -DNOBIGBUF \
-DNOHELP -DNODEBUG -DNOGFTIMER \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DNOREALPATH -DNOUNICODE -i" \
"CC = gcc" "CC2 = gcc" "LNKFLAGS = -i -s"
#AT&T 3B2, 3B20-series computers running AT&T UNIX System V,
#with fullscreen file transfer display.
att3bxc:
@echo 'Making C-Kermit $(CKVER) for AT&T 3B2 or 3B20'
@echo 'with Honey DanBer UUCP and curses...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATTSV -DHDBUUCP -DNONAWS -DNOTIMEVAL $(KFLAGS) \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DNOREALPATH -DCK_CURSES -DCK_NEWTERM -DNOUNICODE -i -O" \
"LNKFLAGS = -i" "LIBS=-lcurses"
#3bx with curses but no charsets
att3bxc3:
@echo 'Making C-Kermit $(CKVER) for AT&T 3B2 or 3B20'
@echo 'with Honey DanBer UUCP with curses... no CSETS'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATTSV -DHDBUUCP $(KFLAGS) -DNOREDIRECT \
-DNOTIMEVAL -DNOTIMEZONE -DMINIDIAL -DNOCHANNELIO -DNOBIGBUF \
-DNOHELP -DNODEBUG -DNOGFTIMER \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
-DNOREALPATH -DNOCSETS -DCK_CURSES -DCK_NEWTERM -i" \
"CC = gcc" "CC2 = gcc" "LNKFLAGS = -i -s" "LIBS = -lcurses"
#Any System V R2 or earlier with Honey DanBer UUCP (same as above)
sys3hdb:
@echo 'Making C-Kermit $(CKVER) for AT&T UNIX System III'
@echo 'or System V R2 or earlier with Honey DanBer UUCP...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATTSV -DHDBUUCP -DNOREALPATH -DNOUNICODE \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
$(KFLAGS) -i -O" "LNKFLAGS = -i"
#Sperry/UNISYS 5000 UTS V 5.2 (System V R2), Honey DanBer UUCP
unisys5r2:
@echo 'Making C-Kermit $(CKVER) for Sperry/UNISYS 5000 UTS V 5.2...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATTSV -DUNISYS52 -DHDBUUCP -DNOREALPATH -DNOUNICODE \
-DNOSYSLOG -DNOSYMLINK -DNOGETUSERSHELL -DNOINITGROUPS -DNOFTRUNCATE \
$(KFLAGS) -i -O" "LNKFLAGS = -i"
#In case they say "make sys5hdb" instead of "make sys3hdb"...
sys5hdb:
$(MAKE) "MAKE=$(MAKE)" sys3hdb
#Create the common header line for all hpux[6-10]* entries. This extra entry is
#here because our header message length may differ for each C-Kermit version.
#Don't use 'fold -s' for HP-UX 6.x or 7.x! This option is there only since
#HP-UX 8.0!
hpux-header:
@HPUX=`uname -r | sed -e 's/^[^1-9]*//' -e 's/\.00$$/.0/'` ; \
Message0='Making C-Kermit $(CKVER) for HP9000 HP-UX' ; \
Message1=$${MESSAGE1:='without any extra compiler optimization'} ; \
MessageH="$$Message0 $$HPUX" ; \
case $$HPUX in \
[67].*) echo "$$MessageH\n$$Message1" ;; \
*.*) echo "$$MessageH $${Message1}$(MESSAGE1A)" | fold -s ;; \
esac | sed -e 's/^ //' -e 's/ *$$//'
#HP-9000 500 HP-UX 5.xx, no TCP/IP.
hpux500:
@echo 'Making C-Kermit $(CKVER) for HP-UX 5.xx - no TCP/IP'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DHPUX -DHPUX5 -DHPUXPRE65 -DNOREDIRECT -DDCLGETCWD \
-DNOGETUSERSHELL -DNOGFTIMER -DNOSYSLOG -DNOTOMACROS -DNOLSTAT \
-DNOSYMLINK -DNOINITGROUPS -DNOUNICODE $(KFLAGS)" \
"LIBS = " "LNKFLAGS = "
#HP-9000 500 HP-UX 5.21 with Wollongong WIN/TCP 1.2 TCP/IP.
#Requires /usr/wins/usr/include and /usr/lib/libnet.a from Wollongong.
#Optimization skipped - takes forever. Really.
hpux500wintcp:
@echo 'Making C-Kermit $(CKVER) for HP-UX 5.21 WIN/TCP'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DHPUX -DHPUX5 -DHPUXPRE65 -DTCPSOCKET -DHPUX5WINTCP \
-DNOREDIRECT -DDCLGETCWD -DNOGETUSERSHELL -DNOGFTIMER -DINADDRX \
-DNOSYSLOG -DNOTOMACROS -DNO_DNS_SRV -DNOSYMLINK -DNOINITGROUPS \
-DNOMHHOST -DNOLSTAT -DNOUNICODE -DNOHADDRLIST \
-I/usr/wins/usr/include $(KFLAGS)" \
"LIBS = /usr/lib/libnet.a" "LNKFLAGS = "
#HP-UX 6.5, short filenames, no network and no curses support.
#ckcpro, ckuusr, ckuus3 and others are broken out because they make the
#optimizer run away. Note that xermit target does not work with this one!
#If you get compiler warnings like 'Switch table overflow' increase the '...'
#value in '-Wc,-Nw...'!
hpux65:
@$(MAKE) hpux-header
@echo 'supporting: NO long filenames, NO network${MESSAGE2}.'
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
ckuusr.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
ckctel.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) \
"CFLAGS = -DHPUX -DHPUX6 -DSIG_V -DNOSYSLOG -DNOSELECT -DFNFLOAT \
-DDCLGETCWD -DNOGETUSERSHELL -DNO_DNS_SRV $(KFLAGS) -Wc,-Nw260"
$(MAKE) wermit \
"CFLAGS = -DHPUX -DHPUX6 -DSIG_V -DNOSYSLOG -DNOSELECT -DFNFLOAT \
-DDCLGETCWD -DNOGETUSERSHELL -DNO_DNS_SRV $(KFLAGS) -Wc,-Nw260 \
$(OFLAGS)" "LNKFLAGS = -s" "LIBS = -lm $(LIBS)"
#Exactly as above, plus curses:
hpux65c:
@MESSAGE2=", but with curses" \
$(MAKE) hpux65 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= -DCK_CURSES $(KFLAGS)" \
"LIBS= -lcurses"
#Exactly as hpux65 but with compiler optimization:
hpux65o:
@MESSAGE1="with compiler optimization" \
$(MAKE) hpux65 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= $(KFLAGS)" "OFLAGS = -O"
#Exactly as hpux65c but with compiler optimization:
hpux65oc:
@MESSAGE1="with compiler optimization" \
$(MAKE) hpux65c KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= $(KFLAGS)" "OFLAGS = -O"
#Take this as startup entry for all 'none optimezed' files under HP-UX 7.x!
#Make sure we doesn't call it with the '-O' option because this will blow up
#the compiler!
hpux70noopt:
@case "$(CFLAGS)" in \
*-O*) echo "Don't use CFLAGS= -O here!" ;; \
*) $(MAKE) ckuusr.$(EXT) ckuus3.$(EXT) ckuus4.$(EXT) ckuus5.$(EXT) \
ckcnet.$(EXT) ckctel.$(EXT) ckuxla.$(EXT) ckcpro.$(EXT) \
KTARGET=$${KTARGET:-$(@)} \
;; \
esac
#HP-UX 7.0, no long filenames, no network support, no curses.
#If you get compiler warnings like 'Switch table overflow' increase the '...'
#value in '-Wc,-Nw...'!
hpux70sf:
@$(MAKE) hpux-header
@echo 'supporting: NO long filenames, NO network, NO curses.'
$(MAKE) hpux70noopt KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DHPUX -DHPUX7 -DSIG_V -DNOGETUSERSHELL -DFNFLOAT \
-DNO_DNS_SRV $(KFLAGS) -Wc,-Nw260"
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DHPUX -DHPUX7 -DSIG_V -DNOGETUSERSHELL -DFNFLOAT \
-DNO_DNS_SRV $(KFLAGS) -Wc,-Nw260 $(OFLAGS)" \
"LNKFLAGS = -s" "LIBS = -lm $(LIBS)"
#Exactly as hpux70sf but with compiler optimization:
hpux70osf:
@MESSAGE1="with compiler optimization" \
$(MAKE) hpux70sf KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= $(KFLAGS)" "OFLAGS = -O"
#HP-UX 7.0, short filenames, but with tcp/ip and curses.
#There must be <arpa/telnet.h> & <arpa/inet.h> present to support this
#configuration. To use this, you must have bought the ARPA Services
#Product from HP, and you must get the files "telnet.h" and "inet.h"
#from the Berkeley Standard Distribution because (reportedly) they are not
#part of the HP product. And you need /usr/lib/libBSD.a.
hpux70sftcpc:
@$(MAKE) hpux-header
@echo 'supporting: NO long filenames, \c'
@echo 'but with networking, curses, HDB uucp...'
$(MAKE) hpux70noopt KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V \
-DCK_REDIR -DCK_RTSCTS -DCK_CURSES -DNOGETUSERSHELL -DFNFLOAT \
-DNO_DNS_SRV -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" $(KFLAGS) \
-Wc,-Nw260"
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V \
-DCK_REDIR -DCK_RTSCTS -DCK_CURSES -DNOGETUSERSHELL -DFNFLOAT \
-DNO_DNS_SRV -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" $(KFLAGS) \
-Wc,-Nw260 $(OFLAGS)" "LNKFLAGS = -s" "LIBS= -lm -lBSD -lcurses"
#Exactly as above but with compiler optimization:
hpux70osftcpc:
@MESSAGE1="with compiler optimization" \
$(MAKE) hpux70sftcpc KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= $(KFLAGS)" "OFLAGS = -O"
#HP 9000 series 300/800 HP-UX 7.0, long filenames, network support, HDB uucp,
#but NO curses. See comments in hpux70sftcpc about TCP/IP support.
hpux70lfn:
@$(MAKE) hpux-header
@echo 'supporting: long filenames, networking, HDB uucp$(MESSAGE2)...'
$(MAKE) hpux70noopt KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V -DFNFLOAT \
-DNOGETUSERSHELL -DNOSETBUF -DCK_REDIR -DCK_RTSCTS -DLONGFN \
-DNO_DNS_SRV -DDIRENT -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" \
$(KFLAGS) -Wc,-Nw260"
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DHPUXDEBUG -DHPUX -DHPUX7 -DTCPSOCKET -DSIG_V -DFNFLOAT \
-DNOGETUSERSHELL -DNOSETBUF -DCK_REDIR -DCK_RTSCTS -DLONGFN \
-DNO_DNS_SRV -DDIRENT -DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" \
$(KFLAGS) -Wc,-Nw260 \
$(OFLAGS)" "LNKFLAGS = -s" "LIBS = -lm -lBSD $(LIBS)"
#Exactly as above + curses.
hpux70lfnc:
@MESSAGE2=', curses' \
$(MAKE) hpux70lfn KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= -DCK_CURSES $(KFLAGS)" \
"LIBS= -lcurses"
#Exactly as above hpux70lfn but with compiler optimization:
hpux70olfn:
@MESSAGE1="with compiler optimization" \
$(MAKE) hpux70lfn KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= $(KFLAGS)" "OFLAGS = -O"
#Exactly as above hpux70lfnc but with compiler optimization:
hpux70olfnc:
@MESSAGE1="with compiler optimization" \
$(MAKE) hpux70lfnc KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= $(KFLAGS)" "OFLAGS = -O"
#HP 9000 Series 300 or 400, HP-UX 8.0, long filenames and TCP/IP support.
#This one should also work on 700/800, but without PA-specific optimization.
#In case -DCK_RTSCTS and -DCK_REDIR make trouble, remove them.
#NOTE: ckcpro.c and ckuusr.c blow up the optimizer, so don't optimize them.
#For HP-UX 8.0 on Motorola CPUs, you might have to reinstall your kernel with
#maxdsiz >= #0x02000000. But if physical memory is small, that still will not
#help much.
hpux80:
@$(MAKE) hpux-header
@MESSAGE3=$${MESSAGE3:='TCP/IP'}; \
echo "supporting: long filenames, $$MESSAGE3, HDB UUCP$(MESSAGE2)..."
$(MAKE) -B "CC=$(CC)" "CC2=$(CC2)" ckcpro.$(EXT) ckuusr.$(EXT) \
"CFLAGS = -DCK_REDIR -DHPUXDEBUG -DHPUX -DHPUX8 -DRENAME -DSIG_V \
-DNOSETBUF -DDIRENT -DCK_RTSCTS -DSTERMIOX -DLONGFN -DTCPSOCKET \
-DHDBUUCP -DNO_DNS_SRV -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT \
$(KFLAGS)"
$(MAKE) -B "CC=$(CC)" "CC2=$(CC2)" xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DCK_REDIR -DHPUXDEBUG -DHPUX -DHPUX8 -DRENAME -DSIG_V \
-DNOSETBUF -DDIRENT -DCK_RTSCTS -DSTERMIOX -DLONGFN -DTCPSOCKET \
-DHDBUUCP -DNO_DNS_SRV -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT \
$(KFLAGS) $(OFLAGS)" "LNKFLAGS = -s" "LIBS = -lm -lBSD $(LIBS)"
#Exactly as above hpux80 + curses.
hpux80c:
@MESSAGE2=', curses' \
$(MAKE) hpux80 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS = $(KFLAGS) -DCK_CURSES" "LIBS = -lcurses"
#HP 9000 HP-UX 8.0, no TCP/IP because /usr/lib/libBSD.a can't be found,
#or TCP/IP header files missing.
hpux80notcp:
@MESSAGE3='NO network, NO curses' \
$(MAKE) "MAKE=$(MAKE)" hpux80 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS = $(KFLAGS) -UTCPSOCKET"
#Now the same as above hpux80 but with compiler optimization
hpux80o:
@MESSAGE1="with compiler optimization" \
$(MAKE) hpux80 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS = $(KFLAGS)" "OFLAGS = -O"
#Exactly as above hpux80 + curses and with compiler optimization.
hpux80oc:
@MESSAGE1="with compiler optimization" \
$(MAKE) hpux80c KTARGET=$${KTARGET:-$(@)} \
"KFLAGS = $(KFLAGS)" "OFLAGS = -O" "LIBS = -lcurses"
#Exactly as above hpux80notcp but with compiler optimization
hpux80onotcp:
@MESSAGE1="with compiler optimization" \
$(MAKE) "MAKE=$(MAKE)" hpux80notcp KTARGET=$${KTARGET:-$(@)} \
"KFLAGS = $(KFLAGS)" "OFLAGS = -O"
#HP 9000 Series 700 or 800, HP-UX 8.0, long filenames and TCP/IP support.
# Like the previous entries, but with PA-RISC-specific optimization.
hpux80pa:
@MESSAGE1="with PA-RISC-specific optimization" \
$(MAKE) hpux80 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS = $(KFLAGS) +Obb1100"
#As above, but with curses.
hpux80pac:
@MESSAGE1="with PA-RISC-specific optimization" \
$(MAKE) hpux80c KTARGET=$${KTARGET:-$(@)} \
"KFLAGS = $(KFLAGS) +Obb1100"
#As above, but compiled with GCC 2.3.3.
hpux80pagcc:
@MESSAGE1='using the gcc compiler' \
$(MAKE) hpux80 KTARGET=$${KTARGET:-$(@)} \
"CC=gcc" "CC2=gcc" "KFLAGS= -funsigned-char $(KFLAGS)"
#HP-UX 9.0, 9.01, 9.03, 9.04, 9.05, 9.07, 9.10 ..., + TCP/IP + curses, fully
#configured. Use this entry with the restricted compiler: no optimization, no
#ANSI support. If you get unresolved sockets library references at link time,
#then try adding -lBSD to LIBS, or else remove -DTCPSOCKET to build a version
#without TCP/IP support.
hpux90:
@MESSAGE1A='. Read comments in the hpux90 entry if you have trouble.' \
$(MAKE) hpux-header
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DHPUXDEBUG -DHPUX9 -DSTERMIOX -DDIRENT \
-DNOSETBUF -DCK_CURSES -DTCPSOCKET -DRENAME -DCK_REDIR -DLONGFN \
-DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS = -lm -lcurses" "CC=$(CC)" "CC2=$(CC2)"
#Like hpux90, but for the "value-added" compiler on all HP 9000 models.
#Adds optimization and ANSI compilation:
# +O2 makes smaller executable (= -O = Level-1 and global optimization)
# +O3 adds interprocedural global optimization, makes bigger executable.
# If optimization fails on some modules, you can add:
# +Obb<n>, +Olimit <n>, or +Onolimit, depending on your cc version,
# where <n> is a number, e.g. +Obb1200. In other words, if you get optimizer
# warnings, add (for example) +Obb1200; if you still get optimizer warnings,
# increase the number. Repeat until warnings go away. If your compiler
# permits it, use +Onolimit. If optimizer blows up on ckcpro.c, see next entry.
# Reportedly, on some configurations, such as HP9000/425e or /340, perhaps
# depending on the amount of main memory, this entry might fail no matter what
# you do ("Out of Memory", "cc: Fatal error in /lib/c.c1", etc). In that case
# use "make hpux90" (no "o").
hpux90o:
@MESSAGE1=$${MESSAGE1:-"with compiler optimization"} \
$(MAKE) hpux90 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS = $(KFLAGS) -Aa -DCK_ANSIC -D_HPUX_SOURCE +O2"
# For HP-UX 9.0 on Motorola CPUs, optimization of ckcpro.c tends to blow up
# the compiler. You might have to reinstall your kernel with maxdsiz >=
# 0x03000000. But if physical memory is small, that still will not help much.
# In that case, use this entry to skip optimization of ckcpro.c.
hpux90m68ko:
@MESSAGE1='without compiler optimization for ckcpro.$(EXT) ...' \
$(MAKE) hpux-header
$(MAKE) ckuusr.$(EXT) ckuus3.$(EXT) ckcpro.$(EXT) \
"CFLAGS = -DHPUXDEBUG -DHPUX9 -DSTERMIOX -DDIRENT \
-DNOSETBUF -DCK_CURSES -DTCPSOCKET -DRENAME -DCK_REDIR -DLONGFN \
-DHDBUUCP -DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DFNFLOAT $(KFLAGS)"
@echo
@MESSAGE1="with compiler optimization for the rest" \
$(MAKE) hpux90 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS = $(KFLAGS) -Aa -DCK_ANSIC -D_HPUX_SOURCE +O2"
# Old name for hpux90m68ko.
hpux90mot:
$(MAKE) hpux90m68ko KTARGET=$${KTARGET:-$(@)} "KFLAGS = $(KFLAGS)"
#Like hpux90o but with additional model-700/800-specific optimizations.
# +ESlit = consolidate strings in read-only memory.
# +ESfsc = inline millicode calls when comparing pointers.
hpux90o700:
@echo 'If you get optimizer warnings \c'
@echo 'try "make hpux90o700 KFLAGS=+Obb1200"'
@MESSAGE1="with PA-RISC-specific optimizations" \
$(MAKE) hpux90o KTARGET=$${KTARGET:-$(@)} \
"KFLAGS = $(KFLAGS) +ESlit +ESsfc"
#HP-UX 9.0, 9.01, 9.03, 9.04, 9.05, 9.07, 9.10 ..., + TCP/IP + curses, fully
#configured, built with gcc, all models except 800 series.
#You might need to add the include path for gcc headers, for example:
# 'KFLAGS=-I/usr/gnu/lib/gcc-lib/hppa1.1-hp-hpux/2.4.5/include/'
hpux90gcc:
@MESSAGE1='using the gcc compiler' \
$(MAKE) hpux90 KTARGET=$${KTARGET:-$(@)} CC=gcc CC2=gcc \
"KFLAGS = $(KFLAGS) -DCK_ANSIC -funsigned-char -O2"
#Make man page for HP-UX 10.00 or later.
hpux100man:
@touch ckuker.cpp
$(MAKE) "SHELL=/usr/bin/sh" "CFLAGS=-DHPUX10" manpage
#HP-9000 HP-UX 10.0 + TCP/IP + curses, fully configured.
#Use with restricted (bundled) compiler: no optimization, no ANSI support.
#libcurses needed for fullscreen file xfer display in HP-UX 10.00 and 10.01.
#libHcurses (NOT libcurses!) for fullscreen display, to work around fatal bugs
#in HP-UX 10.10 and 10.20 curses. Maybe we could use lcurses for 10.30, since
#the 10.10 curses problem is supposedly fixed in 10.30.
# +DA1.0 = Generate PA-RISC 1.0 code that runs on both 700 and 800 models.
# +DA1.1 = Generate PA-RISC 1.1 code that runs on both 700 and 800 models.
# Note that HP-UX 10.20 and upwards do not support PA-RISC 1.0 systems.
hpux100:
@$(MAKE) hpux-header
@case `uname -r` in \
[AB].10.0*) KFLAGS='-DHPUX1000 +DA1.0 $(KFLAGS)' ; \
LIBS=' -lcurses' ;; \
[AB].10.1*) KFLAGS='-DHPUX1010 -D__HP_CURSES +DA1.0 $(KFLAGS)' ; \
LIBS=' -lHcurses' ;; \
[AB].10.2*) KFLAGS='-DHPUX1020 -D__HP_CURSES +DA1.1 $(KFLAGS)' ; \
LIBS=' -lHcurses' ;; \
[AB].10.3*) KFLAGS='-DHPUX1030 -D__HP_CURSES +DA1.1 $(KFLAGS)' ; \
LIBS=' -lHcurses' ;; \
[AB].10.?*) KFLAGS='-DHPUX10XX -D__HP_CURSES +DA1.1 $(KFLAGS)' ; \
LIBS=' -lHcurses' ;; \
[AB].11.0*) KFLAGS='-DHPUX1100 -D__HP_CURSES +DA1.1 $(KFLAGS)' ; \
LIBS=' -lHcurses' ;; \
esac ; \
$(MAKE) "SHELL=/usr/bin/sh" xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DHPUX10 -DDIRENT -DSTERMIOX -DCK_DSYSINI -DHDBUUCP \
-DCK_CURSES -DCK_WREFRESH -DTCPSOCKET -DCK_REDIR -DRENAME -DFNFLOAT \
$$KFLAGS " \
"LNKFLAGS=-s $(LNKFLAGS)" "LIBS = -lm $$LIBS $(KLIBS)"
# Trusted HP-UX 10
# echo KFLAGS=$(KFLGS) YTARGET YTARGET=$(YTARGET) $(XTARGET) ;
hpux100t:
@case "$(KTARGET)" in \
*o+) KENTRY=hpux100o+ ;; \
*o) KENTRY=hpux100o ;; \
*) KENTRY=hpux100 ;; \
esac ; \
MESSAGE1="and support for 'Trusted HP-UX'" \
$(MAKE) $$KENTRY KTARGET=$${KTARGET:-$(@)} \
"KFLAGS= $(KFLAGS) -DHPUX10_TRUSTED" "KLIBS=-lsec"
hpux100to:
$(MAKE) hpux100t KTARGET=$${KTARGET:-$(@)}
hpux100to+:
$(MAKE) hpux100t KTARGET=$${KTARGET:-$(@)}
#HP-9000 HP-UX 10.00 and higher with ANSI prototyping and optimization.
#PA-RISC only, no Motorola or other hardware is support in HP-UX 10.00++.
#The unbundled optional compiler is required.
#Your path should start with /opt/ansic/bin.
# -Wl,-Fw = Remove stack unwind table (info used by debuggers).
# +O2 makes a smaller executable (= -O = Level-1 and global optimization).
# +O3 adds interprocedural global optimization, makes a bigger executable.
# +Onolimit allows all modules to be optimized, no matter how complex. But:
# (a) +Onolimit does not seem to always be there in HP-UX 10.00, and:
# (b) some modules might take hours on low-memory and/or slow systems.
# The following are PA-RISC-specific optimizations:
# +ESlit = Consolidate strings in read-only memory.
# +ESfsc = Inline millicode calls when comparing pointers.
# You might need to configure your kernel for a maxdsiz of 0x07000000 (112MB)
# or greater to prevent the optimizer from running out of space.
hpux100o:
@MESSAGE1="with PA-RISC-specific optimizations $(MESSAGE1)" \
$(MAKE) "SHELL=/usr/bin/sh" "PATH=/opt/ansic/bin:$$PATH" hpux100 \
"KFLAGS = $(KFLAGS) \
-Aa -D_HPUX_SOURCE -DCK_ANSIC -DUTIMEH \
+O2 -Wl,-Fw +ESlit +ESsfc"
#The same like hpux100o but with "+Onolimit".
#On 700 series maxdsize >= 0xB000 (=176MB). Takes a long time.
hpux100o+:
@MESSAGE1="and +Onolimit $(MESSAGE1)" \
$(MAKE) hpux100o \
"KFLAGS = $(KFLAGS) +Onolimit"
hpux110:
$(MAKE) hpux100 KTARGET=$${KTARGET:-$(@)}
hpux110o:
$(MAKE) hpux100o KTARGET=$${KTARGET:-$(@)}
hpux110o+:
$(MAKE) hpux100o+ KTARGET=$${KTARGET:-$(@)}
# Trusted HP-UX 11
hpux110t:
$(MAKE) hpux100t KTARGET=$${KTARGET:-$(@)}
hpux110to:
$(MAKE) hpux100t KTARGET=$${KTARGET:-$(@)}
hpux110to+:
$(MAKE) hpux100t KTARGET=$${KTARGET:-$(@)}
# Synonyms for the HP-UX 11.xx entries just above:
hpux1100:
$(MAKE) hpux100 KTARGET=$${KTARGET:-$(@)}
hpux1100o:
$(MAKE) hpux100o KTARGET=$${KTARGET:-$(@)}
hpux1100o+:
$(MAKE) hpux100o+ KTARGET=$${KTARGET:-$(@)}
# Trusted HP-UX 11
hpux1100t:
$(MAKE) hpux100t KTARGET=$${KTARGET:-$(@)}
hpux1100to:
$(MAKE) hpux100t KTARGET=$${KTARGET:-$(@)}
hpux1100to+:
$(MAKE) hpux100t KTARGET=$${KTARGET:-$(@)}
#Regulus on CIE Systems 680/20
cie:
@echo 'Making C-Kermit $(CKVER) for CIE Systems 680/20 Regulus...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DATTSV -DNOFILEH -DCIE $(KFLAGS) -O" "LNKFLAGS ="
# Linux 1.2 or later with gcc, dynamic libraries, ncurses, TCP/IP.
#
# Most modern Linux systems use ncurses (with curses.h and an ncurses
# shared library). Modern Linux systems also generally use FSSTND 1.2.
# So this entry should work for most people. Read on if you have trouble.
#
# If your Linux system has curses rather than ncurses, use the linuxc
# entry, or if that doesn't work, linuxnc.
#
# The Kermit "large memory model" is used by default to configure big packet
# and script buffers, etc. For small-memory or limited-resource systems,
# "make linux KFLAGS=-DNOBIGBUF".
#
# -DLINUXFSSTND (Linux File System Standard 1.2) gives UUCP lockfile /var/lock
# with string pid. Remove this to get /usr/spool/uucp with int pid, used in
# very early Linux versions. FSSTND 1.2 also says that the PID string in the
# UUCP lock file has leading spaces. This is a change from FSSTND 1.0, which
# used leading zeros. Add -DFSSTND10 to support FSSTND 1.0 instead of 1.2.
#
# Add -DOLINUXHISPEED (Old Linux High Speed support) to turn on an ugly kludge
# in Linux 1.0 and earlier to support speeds of 57600 and 115200. Extremely
# old Linux systems (pre-0.99pl15) will not support this. If OLINUXHISPEED is
# not defined, then only the standard POSIX termios methods of setting the port
# speed will be used, and in this case speeds can be as high as 460800 in most
# modern Linux versions.
#
# -DCK_POSIX_SIG (POSIX signal handling) is good for Linux releases back to at
# least 0.99.14; if it causes trouble for you, remove it from the CFLAGS.
#
# -pipe removes the need for temp files - remove it if it causes trouble.
#
# -funsigned-char makes all characters unsigned, as they should have been
# in the first place.
#
# Add -DCK_DSYSINI if you want a shared system-wide init file.
#
# See ckubwr.txt about -DNOCOTFMC. In fact, you really should read the
# entire Linux section of ckubwr.txt.
#
# The "linuxa" entry can be referenced directly on LIBC systems, but not
# GLIBC, where -lcrypt is required. The "make linux" entry should normally
# be used for all builds on all Linux distributions unless you have special
# requirements, in which case keep reading. CK_NEWTERM added after 7.0B04
# due to new complaints about ncurses changing buffering of tty.
linuxa:
@echo 'Making C-Kermit $(CKVER) for Linux 1.2 or later...'
@echo 'IMPORTANT: Read the comments in the linux section of the'
@echo 'makefile if you have trouble.'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -DLINUX -pipe -funsigned-char -DFNFLOAT -DCK_POSIX_SIG \
-DCK_NEWTERM -DTCPSOCKET -DLINUXFSSTND -DNOCOTFMC -DPOSIX $(KFLAGS)" \
"LNKFLAGS = $(LNKFLAGS)" "LIBS = $(LIBS) -lm"
# Default linux entry. This one sets LIBS according whether libcrypt.a
# is present (in which case we must search it: GLIBC) or not (in which case
# we must not search it: LIBC), and similarly for libresolv.a, in all four
# possible combinations. Please read the comments above the linuxa entry just
# above. This one also requires ncurses. The NCURSES_CPP lets us find
# ncurses.h in case it is not in /usr/include, as some distributions are wont
# to put it in its own directory (the -I is ignored if ncurses.h is found in
# /usr/include).
NCURSES_CPP = -DCK_NCURSES -I/usr/include/ncurses
linux:
@if test -f /usr/lib/libcrypt.a; then \
if test -f /usr/lib/libresolv.a; then \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(NCURSES_CPP) -DHAVE_CRYPT_H $(KFLAGS)" \
"LIBS=-lncurses -lresolv -lcrypt" linuxa ; \
else \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(NCURSES_CPP) -DHAVE_CRYPT_H $(KFLAGS)" \
"LIBS=-lncurses -lcrypt" linuxa ; \
fi \
else \
if test -f /usr/lib/libresolv.a; then \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(NCURSES_CPP) $(KFLAGS)" \
"LIBS=-lncurses -lresolv" linuxa ; \
else \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(NCURSES_CPP) $(KFLAGS)" \
"LIBS=-lncurses" linuxa ; \
fi \
fi
# As above but for Linux systems that have no <sys/select.h>.
linuxns:
$(MAKE) linux KTARGET=$${KTARGET:-$(@)} KFLAGS=-DNO_SYS_SELECT_H
# As above, but forces use of curses rather than ncurses.
# Add -ltermcap to LIBS if necessary.
# Also watch out for libcurses and/or libtermcap having been moved.
# In that case you might need something like:
# "LIBS = -L/usr/lib/curses -lcurses -L/usr/lib/termcap -ltermcap"
linuxc:
@if test -f /usr/lib/libcrypt.a; then \
if test -f /usr/lib/libresolv.a; then \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DCK_CURSES -DHAVE_CRYPT_H $(KFLAGS)" \
"LIBS=-lcurses -lresolv -lcrypt" linuxa ; \
else \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DCK_CURSES -DHAVE_CRYPT_H $(KFLAGS)" \
"LIBS=-lcurses -lcrypt" linuxa ; \
fi \
else \
if test -f /usr/lib/libresolv.a; then \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DCK_CURSES $(KFLAGS)" \
"LIBS=-lcurses -lresolv" linuxa ; \
else \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DCK_CURSES $(KFLAGS)" \
"LIBS=-lcurses" linuxa ; \
fi \
fi
# As above but with with no curses support, for example because you installed
# the developer tools but did not install (n)curses.
linuxnc:
@if test -f /usr/lib/libcrypt.a; then \
if test -f /usr/lib/libresolv.a; then \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DNOTERMCAP -DHAVE_CRYPT_H $(KFLAGS)" \
"LIBS=-lresolv -lcrypt" linuxa ; \
else \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DNOTERMCAP -DHAVE_CRYPT_H $(KFLAGS)" \
"LIBS=-lcrypt" linuxa ; \
fi \
else \
if test -f /usr/lib/libresolv.a; then \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DNOTERMCAP $(KFLAGS)" \
"LIBS=-lresolv" linuxa ; \
else \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DNOTERMCAP $(KFLAGS)" \
"LIBS=" linuxa ; \
fi \
fi
# A minimum-size version for Linux that does only scripting and
# serial communication -- no networks, no file transfer.
linuxso:
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -DLINUX -pipe -funsigned-char -DPOSIX -DCK_POSIX_SIG \
-DLINUXFSSTND -DNOCOTFMC -DNOXFER -DNODEBUG -DNOCSETS -DNOHELP \
-DNONET -DMINIDIAL -DNOSCRIPT -DNOIKSD -DNOPUSH $(KFLAGS)" \
"LNKFLAGS = $(LNKFLAGS)" "LIBS = "
#Mklinux DR3 has horrible bug in <utmpbits.h> - see ckufio.c.
mklinux:
$(MAKE) KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DUTMPBUG" \
"LIBS=-lcrypt -lresolv" linuxa
#LinuxPPC 1999
linuxppc:
@echo 'Making C-Kermit $(CKVER) for LinuxPPC 1999...'
@if test -f /usr/lib/libcrypt.a; then \
if test -f /usr/lib/libresolv.a; then \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(NCURSES_CPP) -DHAVE_CRYPT_H \
-DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \
"LIBS=-lncurses -lresolv -lcrypt" linuxa ; \
else \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(NCURSES_CPP) -DHAVE_CRYPT_H \
-DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \
"LIBS=-lncurses -lcrypt" linuxa ; \
fi \
else \
if test -f /usr/lib/libresolv.a; then \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(NCURSES_CPP) \
-DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \
"LIBS=-lncurses -lresolv" linuxa ; \
else \
$(MAKE) KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(NCURSES_CPP) \
-DLOCK_DIR=\\\\\\"\"/var/lock/modem\\\\\\"\" $(KFLAGS)" \
"LIBS=-lncurses" linuxa ; \
fi \
fi
# The remaining Linux entries are for special or customized builds.
# They have not been generalized like the two just above. Ideally, we
# should allow for every combination of libc vs glibc, gcc vs egcs,
# curses vs ncurses, Kerberos IV vs Kerberos V vs SRP (in any combination),
# and so on -- volunteers welcome.
# If you get "Internal compiler error xxx, output pipe has been closed",
# try removing -pipe.
# Like "make linux" but built with egcs rather than gcc.
linuxegcs:
@echo 'Making C-Kermit $(CKVER) for Linux 1.2 or later with egcs...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} "CC = egcs" "CC2 = egcs" \
"CFLAGS = -O -DLINUX -pipe -funsigned-char \
-DPOSIX -DCK_POSIX_SIG -DCK_NCURSES -DNOCOTFMC \
-DTCPSOCKET -DLINUXFSSTND $(KFLAGS)" \
"LNKFLAGS = $(LNKFLAGS)" "LIBS = -lncurses -lcrypt -lresolv"
#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.05 (no K4 compatibility).
linux+krb5:
@echo 'Making C-Kermit $(CKVER) for Linux on Intel with Kerberos...'
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 \
-DCK_ENCRYPTION -DCK_DES -DCK_CURSES -DCK_POSIX_SIG \
-DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H -I/usr/local/include/ \
-I/usr/local/include/krb5/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/local/lib -lncurses -ltermcap -ldes425 -lkrb5 \
-lcom_err -lk5crypto -lcrypt -lresolv"
#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.05 with K4 compat.
#
# Requires the Kerberos 1.0.5 be compiled with KRB4 compatibility.
linux+krb5+krb4:
@echo 'Making C-Kermit $(CKVER) for Linux on Intel with Kerberos...'
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
-DCK_ENCRYPTION -DCK_DES -DCK_CURSES -DCK_POSIX_SIG \
-DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H -I/usr/local/include/ \
-I/usr/local/include/krb5/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/local/lib -lncurses -ltermcap -lkrb4 -ldes425 -lkrb5 \
-lcom_err -lk5crypto -lcrypt -lresolv"
#Linux on Intel PC with SRP 1.4.5.
#
# remove the -DCK_DES, -DLIBDES and -ldes if you do not have Eric Young's
# libdes.a installed. libsrp.a should be build with GNU MP (libgmp.a)
# instead of AT&T CryptoLib (libcrypt.a) due to naming conflicts with
# standard distribution Linux libraries.
#
linux+srp:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
$(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_SRP \
-DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-I/usr/src/srp-1.4.5/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/src/srp-1.4.5/lib \
-lncurses -ltermcap -lsrp -lgmp -ldes -lcrypt -lresolv"
linux+srp+no-des:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP ...'
$(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_SRP \
-DCK_ENCRYPTION -DCK_CAST \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-I/usr/src/srp-1.4.5/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/src/srp-1.4.5/lib \
-lncurses -ltermcap -lsrp -lgmp -lcrypt -lresolv"
linux+srp-export:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
$(MAKE) srpmit-export KTARGET=$${KTARGET:-$(@)} \
"CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_SRP -DFNFLOAT \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-I/usr/src/srp-1.4.5/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/src/srp-1.4.5/lib \
-lncurses -ltermcap -lsrp -lgmp -lcrypt -lm -lresolv"
linux+srp+pam:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
$(MAKE) srpmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_SRP \
-DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-DCK_PAM -DFNFLOAT \
-I/usr/src/srp-1.4.5/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/src/srp-1.4.5/lib \
-lncurses -ltermcap -lsrp -lgmp -ldes -lcrypt -lpam -ldl -lm -lresolv"
#Linux configured for SSL/TLS
linux+openssl:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with SSL/TLS...'
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_SSL \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-DFNFLOAT \
-I/usr/local/ssl/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS= -L/usr/local/ssl/lib/ \
-lncurses -ltermcap -lssl -lsslcrypto -lm -lresolv"
#Linux configured for SSL/TLS and Shadow Passwords
linux+openssl+shadow:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with SSL/TLS...'
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_SSL \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-DFNFLOAT -DCK_SHADOW \
-I/usr/local/ssl/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS= -L/usr/local/ssl/lib/ \
-lncurses -ltermcap -lssl -lsslcrypto -lm -lresolv"
#Linux on Intel PC with SRP and SSL/TLS.
#
# libsrp.a should be build with GNU MP (libgmp.a)
# instead of AT&T CryptoLib (libcrypt.a) due to naming conflicts with
# standard distribution Linux libraries.
# Requires the Kerberos 1.0.5 be compiled with KRB4 compatibility.
linux+srp+openssl:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_SRP \
-DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-I/usr/local/include/ \
-I/usr/src/srp-1.4.5/include/ \
-I/usr/local/ssl/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/src/srp-1.4.5/lib -L/usr/local/lib \
-L/usr/local/ssl/lib/ \
-lncurses -ltermcap -lsrp -lgmp \
-ldes -lssl -lsslcrypto \
-lcrypt -lresolv"
#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.05 and SRP.
#
# libsrp.a should be build with GNU MP (libgmp.a)
# instead of AT&T CryptoLib (libcrypt.a) due to naming conflicts with
# standard distribution Linux libraries.
# Requires the Kerberos 1.0.5 be compiled with KRB4 compatibility.
linux+krb5+krb4+srp:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB54+SRP...'
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
-DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-I/usr/local/include/ \
-I/usr/local/include/krb5/ \
-I/usr/src/srp-1.4.5/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/src/srp-1.4.5/lib -L/usr/local/lib \
-lncurses -ltermcap -lsrp -lgmp \
-ldes -lkrb4 -ldes425 -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv"
#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.05, SRP and SSL/TLS.
#
# libsrp.a should be build with GNU MP (libgmp.a)
# instead of AT&T CryptoLib (libcrypt.a) due to naming conflicts with
# standard distribution Linux libraries.
# Requires the Kerberos 1.0.5 be compiled with KRB4 compatibility.
linux+krb5+krb4+srp+openssl:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
-DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-I/usr/local/include/ \
-I/usr/local/include/krb5/ \
-I/usr/src/srp-1.4.5/include/ \
-I/usr/local/ssl/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/src/srp-1.4.5/lib -L/usr/local/lib \
-L/usr/local/ssl/lib/ \
-lncurses -ltermcap -lsrp -lgmp \
-ldes -lkrb4 -ldes425 -lssl -lsslcrypto \
-lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv"
#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.05, SSL/TLS.
#
# libsrp.a should be build with GNU MP (libgmp.a)
# instead of AT&T CryptoLib (libcrypt.a) due to naming conflicts with
# standard distribution Linux libraries.
# Requires the Kerberos 1.0.5 be compiled with KRB4 compatibility.
linux+krb5+krb4+openssl:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SSL...'
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
-DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-I/usr/local/include/ \
-I/usr/local/include/krb5/ \
-I/usr/local/ssl/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/local/lib \
-L/usr/local/ssl/lib/ \
-lncurses -ltermcap \
-ldes -lkrb4 -ldes425 -lssl -lsslcrypto -lkrb5 -lcom_err \
-lk5crypto -lcrypt -lresolv"
linux+krb5+krb4+srp-export:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
$(MAKE) krbmit-export KTARGET=$${KTARGET:-$(@)} \
"CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-I/usr/local/include/ \
-I/usr/local/include/krb5/ \
-I/usr/src/srp-1.4.5/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/src/srp-1.4.5/lib -L/usr/local/lib \
-lncurses -ltermcap -lsrp -lgmp \
-lkrb4 -ldes425 -lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv"
linux+krb5+krb4+srp+pam:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with SRP...'
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
-DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-DCK_PAM \
-I/usr/local/include/ \
-I/usr/local/include/krb5/ \
-I/usr/src/srp-1.4.5/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/src/srp-1.4.5/lib -L/usr/local/lib \
-lncurses -ltermcap -lsrp -lgmp -ldes -lkrb4 -ldes425 -lkrb5 \
-lcom_err -lk5crypto -lcrypt -lpam -ldl -lresolv"
#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.05, SRP and SSL/TLS.
# and PAM.
#
# libsrp.a should be build with GNU MP (libgmp.a)
# instead of AT&T CryptoLib (libcrypt.a) due to naming conflicts with
# standard distribution Linux libraries.
# Requires the Kerberos 1.0.5 be compiled with KRB4 compatibility.
linux+krb5+krb4+srp+openssl+pam-debug:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
$(MAKE) krbmit-debug KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
-DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-w -Dmalloc=dmalloc -Dfree=dfree -DMDEBUG -I/usr/local/include/ \
-I/usr/local/include/krb5/ \
-I/usr/src/srp-1.4.5/include/ \
-I/usr/local/ssl/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/src/srp-1.4.5/lib -L/usr/local/lib \
-L/usr/local/ssl/lib/ \
-lncurses -ltermcap -lsrp -lgmp \
-ldes -lkrb4 -ldes425 -lssl -lsslcrypto \
-lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl"
#Linux on Intel PC with Cygnus or MIT Kerberos 5 1.05, SRP and SSL/TLS.
# and PAM.
#
# libsrp.a should be build with GNU MP (libgmp.a)
# instead of AT&T CryptoLib (libcrypt.a) due to naming conflicts with
# standard distribution Linux libraries.
# Requires the Kerberos 1.0.5 be compiled with KRB4 compatibility.
linux+krb5+krb4+srp+openssl+pam:
@echo 'Making C-Kermit $(CKVER) for Linux on i386 with KRB,SRP,SSL...'
$(MAKE) krbmit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -g -O -funsigned-char -pipe -DPOSIX -DLINUX -DNOCOTFMC \
-DCK_AUTHENTICATION -DCK_SRP -DCK_KERBEROS -DKRB5 -DKRB4 -DKRB524 \
-DCK_ENCRYPTION -DCK_CAST -DCK_DES -DLIBDES -DCK_SSL -DCK_PAM \
-DCK_CURSES -DCK_POSIX_SIG -DTCPSOCKET -DLINUXFSSTND -DHAVE_CRYPT_H \
-I/usr/local/include/ \
-I/usr/local/include/krb5/ \
-I/usr/src/srp-1.4.5/include/ \
-I/usr/local/ssl/include/ \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" \
"LIBS = -L/usr/src/srp-1.4.5/lib -L/usr/local/lib \
-L/usr/local/ssl/lib/ \
-lncurses -ltermcap -lsrp -lgmp \
-ldes -lkrb4 -ldes425 -lssl -lsslcrypto \
-lkrb5 -lcom_err -lk5crypto -lcrypt -lresolv -lpam -ldl"
linuxnotcp:
$(MAKE) linux KTARGET=$${KTARGET:-$(@)} "KFLAGS = -DNONET $(KFLAGS)"
# "make linuxnotcp" with lcc (see http://www.cs.princeton.edu/software/lcc)
# lcc does not understand various gcc extensions:
# "__inline__" -- can be eliminated by adding "-D__inline__="
# "__asm__ and "long long" -- in header files, should be surrounded by
# "#ifndef(__STRICT_ANSI__)"/"#endif"
# however, TCP requires some __asm__ functions, so cannot be compiled
linuxnotcp-lcc:
@echo 'Making C-Kermit $(CKVER) for Linux with lcc ...'
@echo 'Read comments in makefile for additional information.'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = lcc" "CC2 = lcc" \
"CFLAGS = -DLINUX -DPOSIX -DCK_CURSES -DCK_POSIX_SIG \
-UTCPSOCKET -DLINUXFSSTND $(KFLAGS)" \
"LNKFLAGS = $(LNKFLAGS)" "LIBS = -lcurses -ltermcap"
# Linux 0.99.14 thru 1.0 with gcc, dynamic libraries, curses, TCP/IP.
# For Linux 1.2 or later, use "make linux" (above).
#
# -DLINUXFSSTND (Linux File System Standard) gives UUCP lockfil /var/lock with
# string pid. Remove this and get /usr/spool/uucp with int pid, which was used
# in early Linux versions.
#
# If you get compiler errors regarding <linux/serial.h>, add -DNOHISPEED.
#
# -DCK_POSIX_SIG (POSIX signal handling) is good for Linux releases back to at
# least 0.99.14; if it causes trouble for you, just remove it.
#
# -DCK_CURSES: Here we link with the regular curses library. But you should
# be using ncurses. Internally, the ckuusx.c module includes <curses.h>, but
# this really should be <ncurses.h>. Thus if you have the new curses
# material, you should either install it with the standard names, or else
# create symbolic links from the standard names to the new ones. If you get
# compile-time errors complaining about data definitions in termcap.h, it
# means you have new kernel material mixed with older libc header files. To
# fix, add "#include <termios.h>" to the <termcap.h> file. Or if all this is
# too confusing, create a new makefile entry based on this one, but with
# -DCK_CURSES removed from CFLAGS and the entire LIBS= clause removed.
#
# But wait, there's more. On most Linux systems, -ltermcap must be included
# in LIBS. But on others, the linker complains that libtermcap can't be
# found. In that case, try removing -ltermcap from LIBS=.
#
# But wait, there's more. The format of the PID string in the UUCP lockfile
# changed between Linux FSSTND 1.0 and 1.2. In the earlier standard, it had
# leading zeros; in the second, it has leading spaces. By default this entry
# uses the newer standard. To force the older one, add -DFSSTND10.
#
# "The nice thing about the Linux standard is there are so many to choose from"
#
# NOTE: Remove -DBIGBUFOK for small-memory or limited-resource systems.
linux10:
@echo 'Making C-Kermit $(CKVER) for Linux 1.0 or earlier...'
@echo 'IMPORTANT: Read the comments in the linux section of the'
@echo 'makefile if you get compilation or link errors.'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -DPOSIX -DCK_CURSES -DCK_POSIX_SIG -DLINUX \
-DTCPSOCKET -DLINUXFSSTND -DOLINUXHISPEED $(KFLAGS)" \
"LNKFLAGS = $(LNKFLAGS)" "LIBS = -lcurses -ltermcap"
#This version was used for Linux prior to C-Kermit 6.0.192.
#Now the "Linux File System Standard" is considered standard, ditto TCP/IP.
linuxold:
@echo 'Making C-Kermit $(CKVER) for Linux...'
@echo 'For FSSTND-recommended UUCP lockfiles, use:'
@echo ' make linux "KFLAGS=-DLINUXFSSTND".'
@echo 'Read comments in makefile for additional options.'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS = -O -DLINUX -DPOSIX -DCK_CURSES -DCK_POSIX_SIG \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS)" "LIBS = -lcurses -ltermcap"
# LynxOS 2.2 with GCC compiler, TCP/IP and fullscreen display.
# Probably also works with Lynx 2.1, and maybe even Lynx 2.0.
# -X means use termios serial drivers rather than BSD4.3-style sgtty drivers.
# If you have trouble with this, try "make bsd KFLAGS=-DNOFDZERO".
lynx:
@echo 'Making C-Kermit $(CKVER) for LynxOS 2.2 with TCP/IP'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS= -O -DPOSIX -DDIRENT -DSETREUID -DCK_CURSES -DTCPSOCKET \
-DCK_ANSIC -DLYNXOS" "LNKFLAGS = -X" "LIBS = -lcurses -lbsd"
lynx22:
$(MAKE) lynx KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
# LynxOS 2.1 with GCC compiler 1.40 and TCP/IP.
lynx21:
@echo 'Making C-Kermit $(CKVER) for LynxOS 2.1 with TCP/IP'
$(MAKE) kermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS= -O -DSETREUID -DTCPSOCKET -DCK_ANSIC -DBSD4 -DLYNXOS" \
"LIBS = -lbsd"
#SCO Xenix 2.2.1 for IBM PC, XT, PS2/30, or other 8088 or 8086 machine
#Should this not work, try some of the tricks from sco286.
#NOTE: -DRENAME is omitted for early SCO Xenix releases because it didn't
#exist, or its semantics were different from the later POSIX-compliant
#version of rename().
sco86:
@echo 'Making C-Kermit $(CKVER) for SCO Xenix/86...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DXENIX -DNOFILEH -DNOIKSD -DNOUNICODE \
$(KFLAGS) -Dunix -F 3000 -i -M0me" \
"LNKFLAGS = -F 3000 -i -s -M0me" "LIBS = -lx"
#SCO Xenix/286 2.2.1, e.g. for IBM PC/AT, PS/2 Model 50, etc.
#Reportedly, this "make" can fail simply because of the size of this
#makefile. If that happens, use "makeL", or edit out some of the
#other entries. No debugging or character-set translation.
sco286:
@echo 'Making C-Kermit $(CKVER) for SCO Xenix/286...'
@echo 'If make fails, try using makeL.'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -xenix -s -O -LARGE -DXENIX -DNOFILEH -Dunix -DRDCHK -DNAP \
-DNOIKSD -DNODEBUG -DNOTLOG -DNOCSETS \
$(KFLAGS) -F 3000 -i -M2let16" \
"LIBS = -lx" "LNKFLAGS = -xenix -s -O -LARGE -F 3000 -i -M2let16"
#SCO Xenix/286 2.2.1, e.g. for IBM PC/AT, PS/2 Model 50, etc.
#As above, but with HDBUUCP (This one might need fixing -- see sco286).
sco286hdb:
@echo 'Making C-Kermit $(CKVER) for SCO Xenix/286 with HDB UUCP...'
@echo 'If make fails, try using makeL.'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -s -O -LARGE -DXENIX -DNOFILEH -Dunix -DRDCHK -DNAP \
-DHDBUUCP -DNOIKSD -DNOUNICODE $(KFLAGS) -F 3000 -i -M2let32" \
"LIBS = -lx" "LNKFLAGS = -s -O -LARGE -F 3000 -i -M2let32"
#SCO Xenix/386 2.2.2 and 2.2.3
sco386:
@echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.2.2...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DXENIX -DNOFILEH -DNOIKSD -DNOREDIRECT \
-Dunix -DRDCHK -DNAP -DNOUNICODE $(KFLAGS) -Otcl -M3e" \
"LNKFLAGS = -s" "LIBS = -lx"
#SCO XENIX/386 2.2.3 with Excelan TCP/IP + curses.
# NOTE: This one might need some work in C-Kermit 6.0.
# You might need to include /usr/include/sys/types.h
# containing "typedef char *caddr_t;". Then at least it compiles.
sco386netc:
@echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.2.3 + Excelan TCP'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -I/usr/include/exos -DXENIX -DCK_CURSES -DNOUNICODE \
-Dunix -DRDCHK -DNAP -DTCPSOCKET -DEXCELAN -DNOJC -DNOMKDIR -DNOFILEH \
-DNOREDIRECT -DNOIKSD -DNO_DNS_SRV $(KFLAGS) -Otcl -M3e" \
"LNKFLAGS = -s" "LIBS = -lc -lx -lsocket -lcurses -ltermcap"
#SCO XENIX/386 2.3.3 with gcc 1.37 or later...
sco386gcc:
@echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.3.3, gcc...'
@echo 'Add -D_NO_PROTOTYPE if you have trouble with Xenix header files'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS= -O -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \
-DNOJC -DNODEBUG -DNOUNICODE $(KFLAGS) \
-traditional -fpcc-struct-return -fstrength-reduce \
-DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM \
-DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \
-DM_SYSIII -DM_SYSV -DM_WORDSWAP -DM_XENIX -DNOIKSD -DNOREDIRECT \
-DPWID_T=int " "LNKFLAGS = -s" "LIBS = -lx"
#As above, but with curses...
sco386gccc:
@echo 'Making C-Kermit $(CKVER) for SCO Xenix/386 2.3.3, gcc...'
@echo 'Add -D_NO_PROTOTYPE if you have trouble with Xenix header files'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2 = gcc" \
"CFLAGS= -O -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \
-DNOJC -DNODEBUG -DCK_CURSES -DNOUNICODE $(KFLAGS) \
-traditional -fpcc-struct-return -fstrength-reduce \
-DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DNOREDIRECT \
-DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \
-DM_SYSIII -DM_SYSV -DM_WORDSWAP -DM_XENIX -DNOIKSD \
-DPWID_T=int " "LNKFLAGS = -s" "LIBS = -lx -lcurses -ltermlib"
#SCO UNIX (and ODT) entries...
#
#NOTE: All SCO UNIX entry LIBS should have "-lc_s -lc -lx" IN THAT ORDER (if
#shared C library is desired), or else "-lc -lx" IN THAT ORDER. Use shared C
#libraries to save memory, but then don't expect to run the resulting binary
#on a different machine. When using -lc_s, you must also use -lc, because the
#shared C library does not contain all of libc.a. And in all cases, -lc must
#ALWAYS precede -lx.
#
#ANOTHER NOTE: -DRENAME is included in all SCO UNIX entries. Remove it if it
#causes trouble. No harm is done by removing it (see ckuins.txt).
#
#AND ANOTHER: In theory, it should be possible to run SCO UNIX binaries on
#SCO Xenix 2.3 and later. In practice, this might not work because of the
#libraries, etc. Also, don't add the -link -z switch (which is supposed to
#root out references to null pointers) because it makes UNIX binaries core
#dump when they are run under Xenix.
#NOTE: -Otcl removed and replaced by -O, since -Otcl produced incorrect code.
#SCO UNIX/386 3.2.0, 3.2.1, and SCO Xenix 2.3.x
sco3r2:
@echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2.0 or 3.2.1 ...'
@echo 'Warning: If make blows up, edit the makefile to join'
@echo 'the following three continued lines into one line.'
@echo 'Also, remove -DRENAME if _rename unresolved at link time.'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \
-DRENAME -DNOIKSD -DNOJC $(KFLAGS) -O" \
"LNKFLAGS = -s" "LIBS = -lc -lx"
#SCO UNIX/386 3.2.0 and SCO Xenix 2.3.x with Excelan TCP/IP support.
#In case of compilation or runtime problems, try adding
#"-DUID_T=int -DGID_T=int" to the CFLAGS. If that doesn't work, try
#"-DUID_T=uid_t -DGID_T=gid_t".
sco3r2net:
@echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 / Excelan...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -I/usr/include/exos -DXENIX -DSVR3 -DNOFILEH \
-DHDBUUCP -DRDCHK -DNAP -DRENAME -DTCPSOCKET -DEXCELAN -DNOJC \
-DNOIKSD -DNOREDIRECT $(KFLAGS) -O" \
"LNKFLAGS = -s" "LIBS = -lc -lx -lsocket"
#SCO UNIX/386 3.2.0 and SCO Xenix 2.3.x with Excelan TCP/IP support.
#As above, with curses added.
sco3r2netc:
@echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 / Excelan / curses...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -I/usr/include/exos -DXENIX -DSVR3 -DNOFILEH \
-DHDBUUCP -DRDCHK -DNAP -DTCPSOCKET -DEXCELAN -DNOJC $(KFLAGS) \
-DRENAME -DCK_CURSES -DNOREDIRECT -DNOIKSD -O" "LNKFLAGS = -s" \
"LIBS = -lc -lx -lsocket -lcurses -ltermcap"
#SCO UNIX 3.2.x or SCO Xenix 2.3.x with Racal InterLan TCP/IP support
# Extra compile flags for other version of Racal InterLan TCP/IP:
# Xenix286/NP621-286, use -Ml -DPARAMH -DINTERLAN -Di286 -DSYSV
# Xenix386/NP621-386, use -DPARAMH -DINTERLAN -Di386 -DSYSV
# ISC386ix/NP622I, use -DSYSV -Di386
# SCO Unix3.2/NP622S, use -DSYSV -Di386 -DSCO_UNIX
# AT&T SVR3.2/NP622A, use -DSYSV -Di386 -DATT
sco3r2netri:
@echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 / Racal InterLan...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -I/usr/include/interlan -DXENIX -DNOFILEH -DHDBUUCP \
-DSVR3 -DRDCHK -DNAP -DTCPSOCKET -DPARAMH -DINTERLAN -Di386 -DSYSV \
-DRENAME -DNOREDIRECT -DNOIKSD -DNOJC $(KFLAGS) -Otcl -M3e" \
"LNKFLAGS = -s" "LIBS = -lc -lx -ltcp"
# SCO XENIX/386 2.3.3 SysV with SCO TCP/IP
# System V STREAMS TCP developed by Lachman Associates Inc and
# Convergent Technologies.
# -DRENAME removed since some reports indicate it is not supported
# (whereas others say it is.)
sco3r2lai:
@echo 'Making C-Kermit $(CKVER) for SCO XENIX/386 2.3.3 + TCP/IP...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DLAI_TCP -Di386 -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK \
-DNAP -DTCPSOCKET -DPWID_T=int -DNOREDIRECT -DNOIKSD $(KFLAGS) \
-Otcl -i -M3e" \
"LNKFLAGS = -i -s" "LIBS = -lc -lx -lsocket"
sco3r2laic:
@echo 'Making C-Kermit $(CKVER) for SCO XENIX/386 2.3.3 + TCP/IP...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DLAI_TCP -Di386 -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK \
-DNAP -DTCPSOCKET -DCK_ANSIC -DCK_CURSES -DM_TERMINFO \
-DPWID_T=int -DNOREDIRECT -DNOIKSD $(KFLAGS) -Otcl -i -M3e" \
"LNKFLAGS = -i -s" "LIBS = -ltinfo -lc -lx -lsocket"
#SCO UNIX/386 3.2v2 (POSIX job control), shared libraries.
sco3r22:
@echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2 ...'
make wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK \
-DNAP -DRENAME -DPID_T=pid_t -DPWID_T=int -DDIRENT -DNOIKSD \
-DNOREDIRECT $(KFLAGS) -O" \
"LNKFLAGS = -s" "LIBS = -lc_s -lc -lx"
#SCO UNIX/386 3.2v2, POSIX job control, fullscreen file transfer display,
#dynamic memory allocation, shared C library
sco3r22c:
@echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2 ...'
@echo 'Warning: If make blows up, edit the makefile to join'
@echo 'the following four continued lines into one line.'
make wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \
-DCK_CURSES -DDIRENT -DRENAME -DNOREDIRECT -DNOIKSD \
-DPID_T=pid_t -DPWID_T=int $(KFLAGS) -O" \
"LNKFLAGS = -s" "LIBS = -lcurses -lc_s -lc -lx"
#SCO UNIX/386 3.2v2 with gcc 1.40 or later (POSIX job control)
sco3r22gcc:
@echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2, gcc'
@echo 'Warning: If make blows up, edit the makefile to join'
@echo 'the following seven continued lines into one line.'
make wermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" \
"CFLAGS= -O -DPOSIX -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP \
-DRENAME -traditional -fpcc-struct-return -fstrength-reduce \
-DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM \
-DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \
-DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \
-DPID_T=pid_t -DPWID_T=int -DNOREDIRECT -DNOIKSD $(KFLAGS) " \
"LNKFLAGS = -s" "LIBS = -lc_s -lc -lx"
#SCO UNIX/386 3.2v2 (ODT 1.1) (POSIX job control) with SCO TCP/IP, shared libs
#Requires SCO TCP/IP or ODT development system for telnet.h, etc.
sco3r22net:
@echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2.2 + TCP/IP...'
@echo 'Warning: If make blows up, edit the makefile to join'
@echo 'the following three continued lines into one line.'
make xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DTCPSOCKET \
-DRENAME -DPID_T=pid_t -DPWID_T=int -DDIRENT -DNOREDIRECT -DNOIKSD \
$(KFLAGS) -O" "LNKFLAGS = -s" "LIBS = -lsocket -lc_s -lc -lx"
#As above, but with curses for fullscreen file transfer display.
#Requires SCO TCP/IP or ODT development system for telnet.h, etc.
sco3r22netc:
@echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v2 + TCP/IP...'
@echo 'Warning: If make blows up, edit the makefile to join'
@echo 'the following three continued lines into one line.'
make xermit KTARGET=$${KTARGET:-$(@)} "CFLAGS= \
-DXENIX -DSVR3 -DNOFILEH -DHDBUUCP -DRDCHK -DNAP -DTCPSOCKET -DRENAME \
-DCK_CURSES -DDIRENT -DNOIKSD -DNOREDIRECT \
-DPID_T=pid_t -DPWID_T=int -O $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS = -lcurses -lsocket -lc_s -lc -lx"
#SCO XENIX 2.3.4, no curses, no TCP/IP, no IKSD.
#This one built and tested in C-Kermit 7.0.
#lcfp is C library floating-point support.
#Use -M3 to generate 32-bit i386 code instead of 16-bit segmented i286 code.
#Use -Me to enable MS nonstandard keywords in system headers.
#Use -W2 or W3 to increase the warning level.
sco234:
@echo 'Making C-Kermit $(CKVER) for SCO XENIX 2.3.4...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DSCO32 -DXENIX -DNOFILEH -DHDBUUCP -DRDCHK \
-DNAP -DNOJC -DNOCOTFMC -DNOIKSD -DNOREDIRECT -DNOTNCODE -DNOGFTIMER \
-DNOTIMEVAL -DNOTIMEZONE -DNOSYMLINK -DSCO234 -DDCLGETCWD $(KFLAGS) \
-Otcl" "LNKFLAGS = -s" "LIBS = -lcfp -lc -lx"
#SCO XENIX 2.3.4, no TCP/IP, no IKSD, but with curses.
# Built and tested in C-Kermit 7.0.
# Note: XENIX 2.3.4 does not have newterm() so no point in adding -DCK_NEWTERM.
sco234c:
@echo 'Making C-Kermit $(CKVER) for SCO XENIX 2.3.4 + curses...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DSCO32 -DXENIX -DNOFILEH -DHDBUUCP -DRDCHK \
-DNAP -DNOJC -DNOCOTFMC -DNOIKSD -DNOREDIRECT -DNOTNCODE -DNOGFTIMER \
-DNOTIMEVAL -DNOTIMEZONE -DNOSYMLINK -DM_TERMCAP -DCK_CURSES -DSCO234 \
-DDCLGETCWD $(KFLAGS) -Otcl" \
"LNKFLAGS = -s" "LIBS = -lcfp -lc -lx -lcurses -ltermlib"
#SCO XENIX 2.3.4 with SCO TCP/IP and curses, no IKSD.
# Built and tested in C-Kermit 7.0. TCP/IP works and curses works.
# Previous versions of this target included -lmalloc, but this caused "error:
# " _calloc : symbol defined more than once" at link time so I removed it.
# Results are likely to vary depending on exactly which version of the SDK
# and TCP/IP SDK you have.
sco234netc:
@echo 'Making C-Kermit $(CKVER) for SCO XENIX 2.3.4 + TCP + curses...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DSCO32 -DXENIX -DNOFILEH -DHDBUUCP -DRDCHK \
-DNAP -DNOJC -DNOCOTFMC -DNOIKSD -DNOREDIRECT -DNOTNCODE -DNOGFTIMER \
-DNOTIMEVAL -DNOTIMEZONE -DNOSYMLINK -DM_TERMCAP -DCK_CURSES -DSCO234 \
-DDCLGETCWD -DTCPSOCKET -DNO_DNS_SRV $(KFLAGS) -Otcl" \
"LNKFLAGS = -s" \
"LIBS = -lcurses -ltermlib -lsocket -lcfp -lc -lx"
# SCO 3.2v4.x targets...
# NOTE: Add -DDCLPOPEN and/or -DDCLFDOPEN to anySCO 3.2v4.x non-gcc entries
# that complain about fdopen() or popen() at compile time. They compile OK
# without these flags as of July 1999. However, the gcc entries seem to
# need them, at least for gcc 2.7.2.2.
# NOTE 2: To enable IKSD support, add:
# -DCK_LOGIN -DNOGETUSERSHELL -DNOINITGROUPS
# to CFLAGS (not tested).
#SCO UNIX/386 3.2v4 (POSIX job control), curses, ANSI C compilation,
#<dirent.h> (EAFS) file system. Remove -lmalloc if it causes trouble. It was
#put there to avoid core dumps caused by regular libc.a malloc. Add -J to make
#all chars unsigned. This version uses select() for CONNECT and also has
#high-precision timers and so might not work on non-TCP systems, in which case
#sco32v4ns should be used instead.
# If you get _ftime redefinition_ complaint, try adding -DODT30 to CFLAGS.
sco32v4:
@echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...'
make xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DCK_SCO32V4 -DNOFILEH -DHDBUUCP -DCK_CURSES -DM_TERMINFO \
-DNOANSI -DSELECT -DNOIKSD -DDCLGETCWD -NOLSTAT \
-DNOLINKBITS -DDCLGETCWD $(KFLAGS) -O" \
"LNKFLAGS = -s" "LIBS = -lcurses -lmalloc -lsocket -lc_s -lc -lx"
# As above, but with no dependence on sockets library or select().
sco32v4ns:
@echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...'
@echo 'No select() and no sockets library.'
make wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DCK_SCO32V4 -DNOFILEH -DHDBUUCP -DCK_CURSES -DM_TERMINFO \
-DNOANSI -DNOIKSD -DNOGFTIMER -DCK_POLL -DNAP -DDCLGETCWD -DNOLSTAT \
-DNOLINKBITS -DDCLGETCWD -O $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS = -lcurses -lmalloc -lc_s -lc -lx"
#SCO UNIX/386 3.2v4 (POSIX job control), TCP/IP, curses, ANSI C compilation,
#<dirent.h> (EAFS) file system. With DIRENT, -lc must come before -lx.
#Reportedly it's OK to add -DCK_REDIR and -DCK_WREFRESH, and to remove -lc_s.
#Requires SCO TCP/IP development system or ODT for telnet.h, etc.
#See sco32v4 above for additional comments.
#NOTE: No more room for -Dxxx -- 25 seems to be the limit. Move some to
#ckcdeb.h or somewhere...
sco32v4net:
@echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...'
@echo 'If you get _ftime redefinition_ complaint,'
@echo 'use make sco-odt30.'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DNOFILEH -DHDBUUCP -DTCPSOCKET -DCK_ANSIC -DCK_CURSES \
-DNAP -DCK_WREFRESH -DNOLINKBITS -D_IBCS2 -DSELECT -DNOLSTAT \
-DDCLGETCWD -DCK_SCO32V4 -DNOIKSD -O \
$(KFLAGS)" "LNKFLAGS = $(LNKFLAGS) -s" \
"LIBS = $(LIBS) -lcurses -lsocket -lmalloc -lsocket -lc_s -lc -lx"
#SCO UNIX/386 3.2v4 with gcc 1.40 or later, POSIX job control.
#Also see comments in sco32r4 entry.
sco32v4gcc:
make xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" \
"CFLAGS= -O -DNOFILEH -DHDBUUCP -DNOANSI -DCK_CURSES -DM_TERMINFO \
-traditional -fpcc-struct-return -fstrength-reduce -funsigned-char \
-D_KR -D_NO_PROTOTYPE -D_SVID -DNOIKSD -DCK_SCO32V4 -DNOLINKBITS \
-DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DSELECT -DNOLSTAT \
-DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 -DDCLGETCWD \
-DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \
-DDCLPOPEN -DDCLFDOPEN $(KFLAGS) " \
"LNKFLAGS = -s" "LIBS = -lcurses -lsocket -lc_s -lc -lx"
#SCO UNIX/386 3.2v4 (POSIX job control), TCP/IP, curses, ANSI C compilation,
#Requires SCO TCP/IP or ODT development system for telnet.h, etc.
#<dirent.h> (EAFS) file system. With DIRENT, -lc must come before -lx.
#gcc 1.40 or later. Also see comments in sco32r4 entry.
sco32v4netgcc:
make xermit KTARGET=$${KTARGET:-$(@)} "CC = gcc" "CC2=gcc" \
"CFLAGS= -O2 -DNOFILEH -DHDBUUCP -DSELECT -DNOLSTAT \
-DNOANSI -DTCPSOCKET -DCK_CURSES -DM_TERMINFO \
-D_KR -D_NO_PROTOTYPE -D_SVID -DNOIKSD -DCK_SCO32V4 -DNOLINKBITS \
-DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DDCLGETCWD \
-DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 \
-DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \
-DDCLPOPEN -DDCLFDOPEN $(KFLAGS)" \
"LNKFLAGS = -s" "LIBS = -lcurses -lsocket -lc_s -lc -lx"
#As above but with bgcc BOUNDS CHECKING (for developers only). -lcheck has
#bounds-checking replacements for malloc, memcpy, bcopy, etc, so must come
#before -lsocket and -lc.
sco32v4netbgcc:
make xermit KTARGET=$${KTARGET:-$(@)} \
"CC = bgcc -pipe -m386" "CC2=bgcc -pipe -m386" \
"CFLAGS= -O1 -g -DNOFILEH -DHDBUUCP -DSELECT \
-DNOANSI -DTCPSOCKET -DCK_CURSES -DM_TERMINFO \
-D_KR -D_NO_PROTOTYPE -D_SVID -DNOIKSD -DCK_SCO32V4 -DNOLSTAT \
-DM_BITFIELDS -DM_COFF -DM_I386 -DM_I86 -DM_I86SM -DNOLINKBITS \
-DM_INTERNAT -DM_SDATA -DM_STEXT -DM_SYS3 -DM_SYS5 -DDCLGETCWD \
-DM_SYSIII -DM_SYSV -DM_UNIX -DM_WORDSWAP -DM_XENIX -Dunix \
-DDCLPOPEN -DDCLFDOPEN $(KFLAGS) " \
"LNKFLAGS = -g" "LIBS = -lcurses -lcheck -lsocket -lx"
sco32v4netnd:
@echo sco32v4net with no debug
$(MAKE) "MAKE=$(MAKE)" sco32v4net KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(KFLAGS) -DNODEBUG -DNOTLOG" "LIBS=$(LIBS)"
sco3r2netnd:
@echo sco32v4netnd built for SCO XENIX 2.3 under SCO UNIX...
@echo requires copying /lib/386/Slibc.a to /lib/386/Slibc_s.a and
@echo getting /lib/386/Slibsocket.a from a XENIX devkit.
@echo WARNING: poll/CK_POLL supported only on XENIX 2.3.4
echo For earlier XENIX systems, replace CK_POLL with RDCHK.
$(MAKE) "MAKE=$(MAKE)" sco32v4netnd KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(KFLAGS) -x2.3 -DNORENAME -DNOSYMLINK" \
"LNKFLAGS = $(LNKFLAGS) -x2.3" \
"LIBS=-ldir -lcfp $(LIBS)"
#SCO UNIX/386 3.2v4 (POSIX job control), TCP/IP, curses, ANSI C compilation,
#<dirent.h> (EAFS) file system. With DIRENT, -lc must come before -lx.
#Reportedly it's OK to add -DCK_REDIR and -DCK_WREFRESH, and to remove -lc_s.
#Requires SCO TCP/IP development system or ODT for telnet.h, etc.
#See sco32v4 above for additional comments.
# Note: "xermit" means use the select() version of the CONNECT module.
sco32v4netx:
@echo 'Making C-Kermit $(CKVER) for SCO UNIX/386 3.2v4...'
@echo 'If you get _ftime redefinition_ complaint,'
@echo 'use make sco-odt30.'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DNOFILEH -DHDBUUCP -DTCPSOCKET -DCK_ANSIC -DCK_CURSES -DNAP \
-DCK_WREFRESH -DNOLINKBITS -D_IBCS2 -DSELECT -DDCLGETCWD \
-DCK_SCO32V4 -DNOIKSD -DNOLSTAT -O $(KFLAGS)" \
"LNKFLAGS = $(LNKFLAGS) -s" \
"LIBS = $(LIBS) -lcurses -lsocket -lmalloc -lsocket -lc_s -lc -lx"
sco32v4netndx:
@echo sco32v4netx with no debug
$(MAKE) "MAKE=$(MAKE)" sco32v4netx KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(KFLAGS) -DNODEBUG -DNOTLOG" "LIBS=$(LIBS)"
sco3r2netndx:
@echo sco32v4netndx built for SCO XENIX 2.3 under SCO UNIX...
@echo requires copying /lib/386/Slibc.a to /lib/386/Slibc_s.a and
@echo getting /lib/386/Slibsocket.a from a XENIX devkit.
@echo WARNING: poll/CK_POLL supported only on XENIX 2.3.4
echo For earlier XENIX systems, replace CK_POLL with RDCHK.
$(MAKE) "MAKE=$(MAKE)" sco32v4netndx KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(KFLAGS) -x2.3 -DNORENAME -DNOSYMLINK" \
"LNKFLAGS = $(LNKFLAGS) -x2.3" \
"LIBS=-ldir -lcfp $(LIBS)"
sco-odt30:
@echo SCO ODT 3.0
$(MAKE) "MAKE=$(MAKE)" sco32v4net KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=$(KFLAGS) -DODT30"
#SCO OpenServer 5.0 (SCO UNIX 3.2v5.0) with SCO development tools, no TCP/IP.
#SCO OSR5 is much more like standard System V than previous SCO releases.
#The SCO development tools include TCP/IP, so this target is only for creating
#artificially limited versions of kermit required by site policy rather than
#the operating system. NOSYSLOG is included because syslog() requires the
#sockets library.
sco32v500:
@echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5...
$(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
-DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \
-DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DNOSYSLOG $(KFLAGS)" \
"LIBS=-lcurses $(LIBS)" "LNKFLAGS=$(LNKFLAGS)"
sco32v5:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sco32v500
#SCO OpenServer 5.0 with networking, SCO development tools.
#Networking libraries are now provided with the OS.
sco32v500net:
@echo Making C-Kermit $(CKVER) for SCO OpenServer Release 5...
$(MAKE) xermit CC=$(CC) CC2=$(CC2) KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -O -DDIRENT -DHDBUUCP -DSVR4 -DCK_SCOV5 -DCK_RTSCTS \
-DCK_CURSES -DCK_WREFRESH -DCK_NEWTERM -DSELECT -DSELECT_H \
-DNOGETUSERSHELL -DNOLSTAT -DNOLINKBITS -DTCPSOCKET $(KFLAGS)" \
"LIBS=-lcurses -lsocket $(LIBS)" "LNKFLAGS=$(LNKFLAGS)"
sco32v5net:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sco32v500net
#SCO OpenServer 5.0 with gcc, no networking.
#Note: NOSYSLOG required for non-net entries because it requires <socket.h>
sco32v500gcc:
@echo Using gcc...
$(MAKE) "MAKE=$(MAKE)" sco32v500CC=gcc CC2=gcc \
KTARGET=$${KTARGET:-$(@)} "KFLAGS= $(KFLAGS)"
#SCO OpenServer 5.0 with networking, gcc.
sco32v500netgcc:
@echo TCP/IP networking added - using gcc...
$(MAKE) "MAKE=$(MAKE)" sco32v500net CC=gcc CC2=gcc \
KTARGET=$${KTARGET:-$(@)} "KFLAGS=$(KFLAGS)"
#SCO OpenServer 5.0 with networking, gcc, elf.
sco32v500netgccelf:
@echo TCP/IP networking added - using gcc, dynamic elf library
$(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \
KTARGET=$${KTARGET:-$(@)} "KFLAGS=-O3 -belf" "LNKFLAGS=-belf"
sco32v502:
$(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DSCO_OSR502 $(KFLAGS)"
#SCO OpenServer 5.0.2 with networking, SCO development tools.
sco32v502net:
@echo TCP/IP networking added...
$(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-b elf -DSCO_OSR502 $(KFLAGS)"
#SCO OpenServer 5.0.4 (SCO UNIX 3.2v5.0.4) with SCO development tools.
#Like 5.0, but adds high serial speeds. First POSIX-based SCO version.
sco32v504:
$(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DSCO_OSR504 -b elf -DPOSIX $(KFLAGS)"
#SCO OpenServer 5.0.4 with gcc, no networking.
sco32v504gcc:
@echo Using gcc...
$(MAKE) "MAKE=$(MAKE)" sco32v500"CC=gcc" "CC2=gcc" \
KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DSCO_OSR504 -DPOSIX $(KFLAGS)"
#SCO OpenServer 5.0.4 with networking, SCO development tools.
sco32v504net:
@echo TCP/IP networking added...
$(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-b elf -DSCO_OSR504 -DPOSIX $(KFLAGS)"
#SCO OpenServer 5.0.4 with networking, gcc.
sco32v504netgcc:
@echo TCP/IP networking added - using gcc...
@echo If gcc crashes on ckwart.c then build it by hand:
@echo " gcc -o wart -DCK_SCOV5 ckwart.c"
$(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \
KTARGET=$${KTARGET:-$(@)} "KFLAGS=-DSCO_OSR504 -DPOSIX $(KFLAGS)"
#SCO OpenServer 5.0.4 with networking, gcc, elf.
sco32v504netgccelf:
@echo TCP/IP networking added - using gcc, dynamic elf library
$(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc"
KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DSCO_OSR504 -DPOSIX -O3 -belf $(KFLAGS)" \
LNKFLAGS="-belf"
#SCO OpenServer 5.0.5 (SCO UNIX 3.2v5.0.5) with SCO development tools.
#Like 5.0, but adds high serial speeds. First POSIX-based SCO version.
sco32v505:
$(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DSCO_OSR505 -b elf -DPOSIX $(KFLAGS)"
#SCO OpenServer 5.0.5 (SCO UNIX 3.2v5.0.5) with UDK.
sco32v505udk:
$(MAKE) "MAKE=$(MAKE)" sco32v500 KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DSCO_OSR505 -DDCLTIMEVAL -b elf -DPOSIX $(KFLAGS)"
#SCO OpenServer 5.0.5 with gcc, no networking.
sco32v505gcc:
@echo Using gcc...
$(MAKE) "MAKE=$(MAKE)" sco32v500"CC=gcc" "CC2=gcc" \
KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DSCO_OSR505 -DPOSIX -funsigned-char $(KFLAGS)"
#SCO OpenServer 5.0.5 with networking, SCO development tools.
sco32v505net:
@echo TCP/IP networking added...
$(MAKE) "MAKE=$(MAKE)" sco32v500net KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DSCO_OSR505 -b elf -DPOSIX $(KFLAGS)"
#SCO OpenServer 5.0.5 with networking, gcc.
sco32v505netgcc:
@echo TCP/IP networking added - using gcc...
@echo If gcc crashes on ckwart.c then build it by hand:
@echo " gcc -o wart -DCK_SCOV5 ckwart.c"
$(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc" \
KTARGET=$${KTARGET:-$(@)} \
"KFLAGS=-DSCO_OSR505 -DPOSIX -funsigned-char $(KFLAGS)"
#egcs is just like gcc but generates ELF by default.
#Or you can include -melf (not -belf) to force it.
sco32v505netegcs:
$(MAKE) "MAKE=$(MAKE)" "KFLAGS=$(KFLAGS)" sco32v505netgcc \
KTARGET=$${KTARGET:-$(@)}
#SCO OpenServer 5.0.5 with networking, gcc, elf.
sco32v505netgccelf:
@echo TCP/IP networking added - using gcc, dynamic elf library
$(MAKE) "MAKE=$(MAKE)" sco32v500net "CC=gcc" "CC2=gcc"
"KFLAGS=-DSCO_OSR505 -DPOSIX -funsigned-char -O3 -belf $(KFLAGS)" \
KTARGET=$${KTARGET:-$(@)} LNKFLAGS="-belf"
#Tandy 16/6000 with Xenix 3.0
#Add more -DNOxxx options to remove features if program won't load.
#Successful operation is a function of program size, physical memory,
#available swap space, etc. The following stripped-down configuration
#seems to work on most Tandy 6000s. NOTE: "-+" means allow long variable
#names, needed for C-Kermit 6.0 because some identifiers are not unique
#within the first six characters.
#C-Kermit 7.0 does not build here; "too many defines".
trs16:
@echo 'Making C-Kermit $(CKVER) for Tandy 16/6000, Xenix 3.0...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -+ -DATTSV -DTRS16 -DNOMKDIR -DDCLPOPEN -DCK_CURSES \
-DNODEBUG -DNOTLOG -DNOHELP -DNOSCRIPT -DNOCSETS -DNOIKSD \
-DNOREDIRECT -DNOSYSLOG -DNOPUTENV -DNOREALPATH \
$(KFLAGS) -O" "LIBS= -lcurses -ltermcap" "LNKFLAGS = -+ -n -s"
#MINIX/2.0 32 Bit version for intel 386+ running the POSIX-compliant MINIX
# version 2.0 (The definition of fatal avoids a conflict with a symbol by
# the same name in the curses library.) It is impossible to compile with
# network support since Minix does not support Berkeley sockets.
# Note: use chmem liberally on the compiler passes, make, and the final
# kermit executable. (3 megabytes of memory for each is sufficient.)
# From Terry McConnell, Syracuse U, and Will Rose. Will says:
# The stacks for make and some compiler passes needed to be increased
# with chmem as follows:
# make 1MB
# /usr/lib/em_cemcom.ansi 3MB
# /usr/lib/em_opt 1MB
# /usr/lib/i386/cg 1MB
# /usr/lib/i386/as 1MB
# The compiler temporary directory was set to /usr/tmp via the TMPDIR
# environment variable; more than 1MB of temporary space was needed.
# Kermit itself needs at least 1MB of stack.
minix20:
@echo 'Making C-Kermit $(CKVER) for MINIX 2.0/386...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} EXT=o \
"CFLAGS= -wo -DV7 -DMINIX2 -DMINIX -DSIG_V -D_POSIX_SOURCE \
-DCKCPU=\\\"i-386\\\" -DNOIKSD -Dfatal=myfatal -DCK_CURSES \
-DNOSYSLOG -DUSE_MEMCPY -DNOREALPATH $(KFLAGS)" "LIBS= -lcurses"
#MINIX/386 (PC Minix modified by Bruce Evans in Australia for 386 addressing)
# For MINIX 1.5+ (but < 2.0)
minix386:
@echo 'Making C-Kermit $(CKVER) for MINIX/386...'
@echo 'TOTALLY UNTESTED!'
$(MAKE) wermit EXT=s KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DV7 -DMINIX -D_POSIX_SOURCE $(KFLAGS)"
#MINIX/386 (PC Minix modifed by Bruce Evans in Australia to use 386 addressing)
minix386gcc:
@echo 'Making C-Kermit $(CKVER) for MINIX/386 with gcc...'
@echo 'TOTALLY UNTESTED!'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} "CC=gcc -g -O" "CC2=gcc -g" \
"CFLAGS= -DV7 -DMINIX -D_POSIX_SOURCE $(KFLAGS)"
#MINIX - 68k version with ACK compiler.
# If you have trouble compiling or running wart, "touch wart".
# If it still doesn't work, "touch ckcpro.c".
# The version configured below has many features removed, including
# the TRANSMIT, MSEND, HELP, and SCRIPT commands, international
# character set support, and the entire script programming language.
# But it does have an interactive command parser.
# Make sure make(1) has (at least) 100000 chmemory!
# If you are using the Amsterdam C compiler, you might have to add "-D__ACK__".
minix68k:
@echo 'Making C-Kermit $(CKVER) for MINIX 68k with ACK...
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DV7 -DMINIX -D_MINIX -D_POSIX_SOURCE \
-DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
-DNOSCRIPT -DNOCSETS -DNOSPL $(KFLAGS) \
-DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V"
#MINIX - 68k version with c68 compiler.
# If you have trouble compiling or running wart, "touch wart" or
# "touch ckcpro.c". Compiling ckudia.c (no -DNODIAL!) might fail. :-(
# Give c68 250000 bytes of stack+heap; make sure make(1) has at least
# 100000 chmemory. On a 1Mb Atari ST this means that the recursive
# call of make fails due to memory shortage. Try "make -n minixc68 >makeit",
# followed by ". makeit". Otherwise, as above.
minixc68:
@echo 'Making C-Kermit $(CKVER) for MINIX 68k with c68...
$(MAKE) wermit "CC= cc -c68" KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DV7 -DMINIX -D_MINIX -D_POSIX_SOURCE \
-DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
-DNOSCRIPT -DNOCSETS -DNOSPL $(KFLAGS) \
-DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V"
#MINIX - 68k version with c68 compiler.
#A variation on the above that was recently (Sep 95) reported to work.
minixc68a:
@echo 'Making C-Kermit $(CKVER) for MINIX 68k with c68...
$(MAKE) wermit "CC= cc -c68" KTARGET=$${KTARGET:-$(@)} \
"CFLAGS= -DV7 -DMINIX -D_MINIX -D_POSIX_SOURCE \
-DCK_ANSIC -DNODEBUG -DNOTLOG -DMINIDIAL -DEXTEN -DMYCURSES \
-DNOSCRIPT -DNOCSETS -DNOSPL -DNOJC -DDIRENT \
-DNOSETKEY -DNOESCSEQ $(KFLAGS) \
-DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V"
#MIPS Computer Systems with UMIPS RISC/OS 4.52 = AT&T UNIX System V R3.0.
#Remove -DNOJC if job control can be safely used.
mips:
@echo 'Making C-Kermit $(CKVER) for MIPS RISC/OS...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DMIPS -DDIRENT -DCK_POLL -DNOJC -DPID_T=int \
-DGID_T=gid_t -DUID_T=uid_t -i -O1500 $(KFLAGS)"
#As above, but with TCP/IP and fullscreen support.
mipstcpc:
@echo 'Making C-Kermit $(CKVER) for MIPS RISC/OS...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DMIPS -DDIRENT -DCK_POLL -DNOJC \
-DTCPSOCKET -DCK_CURSES -I/usr/include/bsd \
-DPID_T=int -DGID_T=gid_t -DUID_T=uid_t -i -O1500 $(KFLAGS)" \
"LIBS = -lcurses -lbsd"
#Motorola Delta System V/68 R3, signal() is void rather than int.
#Uses dirent.h and Honey DanBer uucp. Supports TCP/IP.
#After building, use "mcs -d" to reduce size of the executable program.
sv68r3:
@echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3...'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNO_DNS_SRV -DTCPSOCKET \
-DNOUNICODE $(KFLAGS) -O" "LNKFLAGS ="
#Motorola Delta System V/68 R3V5, signal() is void rather than int.
#Uses dirent.h and Honey DanBer UUCP. Supports TCP/IP.
#After building, use "mcs -d" to reduce size of the executable program.
sv68r3v5:
@echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3V5'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNO_DNS_SRV \
-DTCPSOCKET -DINADDRX -DNOUNICODE $(KFLAGS) -O" \
"LNKFLAGS =" "LIBS = -linet"
#Motorola MVME147 System V/68 R3 V5.1. Requires gcc 2.1 to compile.
#After building, use "mcs -d" to reduce size of the executable program.
sv68r3v51:
@echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3V5.1'
$(MAKE) wermit "CC=gcc-delta" "CC2=gcc-delta" \
KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNODEBUG -DNO_DNS_SRV \
-DNOUNICODE $(KFLAGS) -O2 -v -ftraditional" \
"LNKFLAGS = -s -v" "LIBS = -lm881"
#Motorola MVME147 System V/68 R3V6. derived from Motorola Delta System R3V5.
#Checked on larger Motorola System V/68 R3V6 (with NSE Network Services Ext.)
#After building, use "strip" to reduce size of the executable program.
#Try removing the LIBS clause if it causes trouble (libnsl might not actually
#be necessary, and reportedly it is missing on some systems).
# "LIBS = -lnsl" removed in C-Kermit 6.1 - put back if needed.
sv68r3v6:
@echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/68 R3V6'
$(MAKE) wermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSV68R3V6 -DDIRENT -DHDBUUCP -DNOLOGIN -DNOINITGROUPS \
-DNOSYMLINK -DNOREDIRECT -DNOGFTIMER -DTCPSOCKET -DDCLGETCWD \
-DNO_DNS_SRV -DNOUNICODE $(KFLAGS) -O" "LNKFLAGS ="
#Motorola Delta System V/88 R32, signal() is void rather than int.
#Uses dirent.h and Honey DanBer uucp. Needs <sys/utime.h> for setting
#file dates. Supports TCP/IP.
#After building, use "mcs -d" to reduce size of the executable program.
sv88r32:
@echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/88 R32...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -DSV88R32 -DDIRENT -DHDBUUCP -DTCPSOCKET \
-DSYSUTIMEH -DCK_CURSES -DNOGETUSERSHELL -DGTODONEARG $(KFLAGS) -O" \
"LIBS= -lcurses -lresolv" "LNKFLAGS = -s"
#Motorola Delta System V/88 R40. Has <sys/termiox.h>, regular Berkeley
#sockets library, i.e. in.h and inet.h are not misplaced in sys (rather than
#netinet and arpa, respectively). Uses ANSI C constructs, advisory file
#locking on devices, etc. curses support added. Reportedly, the
#/usr/include/sys/vnode.h file has a bug which must be fixed before this
#makefile entry can work correctly. The "if DEBUG" directive at about line
#320 must be changed to "ifdef DEBUG" (Reportedly, this was fixed in
#in System V/88 R4.3).
#After building, use "mcs -d" to reduce size of the executable program.
sv88r40:
@echo 'Making C-Kermit $(CKVER) for Motorola UNIX System V/88 R40...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
"CFLAGS = -O -DSVR4 -DMOTSV88R4 -DDIRENT -DHDBUUCP -DSTERMIOX \
-DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL -DGTODONEARG $(KFLAGS)" \
"LIBS= -lsocket -lnsl -lcurses -lresolv" "LNKFLAGS = -s"
#Olivetti X/OS R2.3, 3.x.
#NOTES:
# . If you build the executable on 2.x X/OS, it will also run on 3.x.
# . If you build it on 3.x X/OS, it will NOT run on 2.x.
# . Kermit can run with no privileges unless the uucp lines are protected,
# in which case kermit must be owned by uucp with suid bit set:
# chown uucp kermit ; chmod 4111 kermit.
xos23:
@echo 'Making C-Kermit $(CKVER) for Olivetti X/OS...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
'CFLAGS=-OLM -DOXOS -DTCPSOCKET -DHDBUUCP $(KFLAGS)' \
"LIBS=" "LNKFLAGS="
#As above, but with curses.
xos23c:
@echo 'Making C-Kermit $(CKVER) for Olivetti X/OS with curses...'
$(MAKE) xermit KTARGET=$${KTARGET:-$(@)} \
'CFLAGS=-OLM -DOXOS -DTCPSOCKET -DHDBUUCP -DCK_CURSES $(KFLAGS)' \
"LIBS=-lcurses" "LNKFLAGS="
ckuuid:
@echo 'building C-Kermit $(CKVER) set-UID/set-GID test programs'
$(CC) -DANYBSD -DSAVEDUID -o ckuuid1 ckuuid.c
$(CC) -DANYBSD -o ckuuid2 ckuuid.c
$(CC) -DANYBSD -DNOSETREU -o ckuuid3 ckuuid.c
$(CC) -DANYBSD -DSETEUID -DNOSETREU -o ckuuid4 ckuuid.c
$(CC) -o ckuuid5 ckuuid.c
@echo 'Read the top of ckuuid.c for directions...for testing'
@echo 'you must make these programs setuid and setgid'
############################################################################
# A N T I Q U I T I E S
#
# The following are antique targets from C-Kermit 5A or earlier. They have
# not been updated or tested in years. Most of them will need recent features
# disabled, usually with some combination of -DNOUNICODE, -DNOIKSD, -DNOANSI,
# -DNOCKGHNLHOST, -DNO_DNS_SRV, -DNOREDIRECT, -DNOREALPATH, -DNOCURSES, etc.
# They are also missing the KTARGET=$${KTARGET:-$(@)} business.
# For details see ckuins.txt and ckccfg.txt.
#
############################################################################
#Berkeley Unix 2.8, 2.9 for PDP-11s with I&D space, maybe also Ultrix-11???
#C-Kermit(5A) is simply too large (even turning off almost every feature
#available) to run without both I&D space plus overlays. The old comment
#suggested running 'pcc' but that won't help. Changing 'cc' to 'ckustr.sed'
#will cause a string extraction to be done, saving D space by moving strings
#to a file.
bsd29:
@echo Making C-Kermit $(CKVER) for 2.8 or 2.9BSD.
@echo Read the makefile if you have trouble with this...
$(MAKE) ovwermit \
"CFLAGS= -DBSD29 -DNODEBUG -DNOTLOG -DNOCSETS -DNOHELP \
-DNOSCRIPT -DNOSPL -DNOXMIT -DNODIAL $(KFLAGS)" \
"LNKFLAGS= -i -lndir" "CC= cc " "CC2= cc"
bsd210:
@echo Please use ckubs2.mak to build C-Kermit $(CKVER) for 2.10BSD.
bsd211:
@echo Please use ckubs2.mak to build C-Kermit $(CKVER) for 2.11BSD.
#Charles River Data Systems Universe with UNOS Version 9.2
crds:
@echo 'Making C-Kermit $(CKVER) for Charles River Data Systems...'
make xermit \
"CFLAGS = -DATTSV -DNOANSI -DDIRENT -DLONGFN -DTCPSOCKET \
-DLOCK_DIR=\\\"/usr/spool/uucp\\\" -DNOSETREU \
-Dsuspend=ksuspend $(KFLAGS) -O" "LNKFLAGS ="
#Microport SV/AT for IBM PC/AT 286 and clones, System V R2.
#The -O flag may fail on some modules (like ckuus2.c), in which case you
#should compile them by hand, omitting the -O. If you get "hash table
#overflow", try adding -DNODEBUG.
#Also, reportedly this compiles better with gcc than with cc.
mpsysv:
@echo 'Making C-Kermit $(CKVER) for Microport SV/AT 286...'
$(MAKE) wermit \
"CFLAGS= -DATTSV $(KFLAGS) -O -Ml" "LNKFLAGS = -Ml"
#Microsoft "Xenix/286" e.g. for IBM PC/AT
xenix:
@echo 'Making C-Kermit $(CKVER) for Xenix/286'
$(MAKE) wermit \
"CFLAGS= -DXENIX -DNOFILEH $(KFLAGS) -Dunix -F 3000 -i" \
"LNKFLAGS = -F 3000 -i"
#PC/IX, Interactive Corp System III for IBM PC/XT
pcix:
@echo 'Making C-Kermit $(CKVER) for PC/IX...'
$(MAKE) wermit \
"CFLAGS= -DPCIX -DISIII $(KFLAGS) -Dsdata=sdatax -O -i" "LNKFLAGS = -i"
#Integrated Solutions Inc V8S VME 68020
isi:
@echo Making C-Kermit $(CKVER) for 4.2BSD on ISI...
$(MAKE) wermit "CC = cc" \
"CFLAGS= -DBSD4 -DTCPSOCKET -DINADDRX -DDCLPOPEN -DDEBUG -DNOSETREU \
-DCK_CURSES $(KFLAGS)" "LIBS = -lcurses -ltermcap"
#Interactive Corp version of AT&T System III
#is3: (very old, probably not sufficient for 5A or later)
# @echo 'Making C-Kermit $(CKVER) for Interactive System III...'
# make wermit "CFLAGS = -DISIII -Ddata=datax -O -i" "LNKFLAGS = -i"
#The following should work, use it if you don't have gcc.
#Use is3gcc if you have gcc.
is3:
@echo 'Making C-Kermit $(CKVER) for Interactive System III...'
$(MAKE) wermit \
"CFLAGS= -DISIII $(KFLAGS) -Ddata=datax -DNAP -DHDBUUCP
-DLOCK_DIR=\"/usr/spool/uucp\" -DSIGTYP=void -O -i" "LNKFLAGS = -i"
#Interactive UNIX System V R3, no network support. Uses <dirent.h> and Honey
#DanBer UUCP. If this entry does not compile correctly, try any or all of the
#following. These suggestions also apply more or less to the other is5r3xxx
#entries that follow this one.
# . Remove the UID_T and GID_T definitions, or change them as required.
# . Change -DDIRENT to -DSDIRENT.
# . Add -DSIGTYP=void.
# . Remove -g from LNKFLAGS.
# . Add -DNOANSI to remove compiler complaints about ANSI C constructions
# . Add other -DNOxxx's to save space (e.g. -DNOCSETS)
# See the next few makefile entries for related examples.
is5r3:
@echo 'Making C-Kermit $(CKVER) for Interactive 386/ix or later...'
@echo 'If this does not work please read the makefile entry.'
$(MAKE) wermit \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -g -DNOCSETS \
-DUID_T=ushort -DGID_T=ushort -DI386IX $(KFLAGS)" \
"LNKFLAGS = -g"
#Interactive Corp System System V R3 with gcc
is3gcc:
@echo 'Making C-Kermit $(CKVER) for Interactive System V R3 / gcc...'
$(MAKE) wermit CC=gcc CC2=gcc \
'CFLAGS = -D_SYSV3 -DISIII -Ddata=datax -DNAP -DHDBUUCP \
-DLOCK_DIR=\"/usr/spool/uucp\" -DSIGTYP=void -O' "LNKFLAGS ="
#Interactive UNIX System V R3, POSIX variant. Untested.
#Uses dirent.h and Honey DanBer uucp. Read comments in is5r3 entry.
is5r3p:
@echo 'Making C-Kermit $(CKVER) for Interactive 386/ix or later...'
$(MAKE) wermit \
"CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP -g -DNOCSETS \
-DI386IX -DPOSIX $(KFLAGS)" "LNKFLAGS=" "LIBS=-lcposix"
#Interactive UNIX SVR3 2.2.1, job control, curses, no net, gcc.
is5r3gcc:
$(MAKE) wermit CC=gcc CC2=gcc \
"CFLAGS=-g -posix -DSVR3 -DDIRENT \
-DHDBUUCP -O -DNOCSETS -DI386IX -DSVR3JC -DCK_CURSES \
$(KFLAGS)" LNKFLAGS="-posix" LIBS="-lcurses -lc_s"
#Interactive UNIX System V R3 with TCP/IP network support.
#Needs -linet for net functions. signal() is void rather than int.
#Uses dirent.h and Honey DanBer uucp. Read comments in is5r3 entry.
#Also see is5r3net2 if you have trouble with this entry.
is5r3net:
@echo 'Making C-Kermit $(CKVER) for Interactive 386/ix...'
@echo 'If this does not work please read the makefile entry.'
$(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET \
-DI386IX $(KFLAGS) -O" "LIBS = -linet"
is5r3netgcc:
$(MAKE) is5r3net CC=gcc CC2=gcc
#Interactive UNIX System V R3, no job control, signal() void rather than int.
#Uses dirent.h and Honey DanBer uucp. Needs -linet for net functions.
#Read comments in is5r3 entry. Use this entry if is5r3net fails.
#Saves some space by stripping (-s) and using shared library (-lc_s).
is5r3net2:
@echo 'Making C-Kermit $(CKVER) for Interactive 386/ix...'
$(MAKE) wermit \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DTCPSOCKET -DNOJC \
-DSIGTYP=void -DNOANSI -DI386IX $(KFLAGS) -O" \
"LNKFLAGS= -s" "LIBS = -linet -lc_s"
#Interactive UNIX System V R3 (version 2.2 or later) with job control & curses.
#Uses dirent.h and Honey DanBer UUCP.
is5r3jc:
@echo 'Making C-Kermit $(CKVER) for Interactive Unix 2.2 or later...'
$(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS \
-DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES \
-DPOSIX_JC -DCK_REDIR -DCK_POLL -DDCLGETCWD \
$(KFLAGS)" "LIBS=-lcurses -lc_s -linet"
is5r3jcgcc:
$(MAKE) is5r3jc CC="gcc -DCK_ANSILIBS -DDCGPWNAM -O4" CC2=gcc \
KFLAGS="$(KFLAGS)" LNKFLAGS="$(LNKFLAGS)"
#Sunsoft/Interactive UNIX System V R3 (version 2.2 or later)
#with job control, curses, and TCP/IP networking.
#Uses dirent.h and Honey DanBer UUCP.
is5r3netjc:
@echo 'Making C-Kermit $(CKVER) for Interactive Unix 2.2 or later...'
$(MAKE) wermit CC="$(CC)" CC2="$(CC2)" \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -O -DNOCSETS \
-DUID_T=ushort -DGID_T=ushort -DI386IX -DSVR3JC -DCK_CURSES \
-DPOSIX_JC -DCK_REDIR -DTCPSOCKET -DSELECT \
$(KFLAGS)" "LIBS=-linet -lcurses -lc_s"
is5r3netjcgcc:
$(MAKE) is5r3netjc CC="gcc -DCK_ANSILIBS -DDCGPWNAM -O4" CC2=gcc \
KFLAGS="$(KFLAGS)" LNKFLAGS="$(LNKFLAGS)"
#Masscomp System III
rtu:
@echo 'Making C-Kermit $(CKVER) for Masscomp RTU System III...'
$(MAKE) wermit \
"CFLAGS= -UFIONREAD -DATTSV $(KFLAGS) -O" "LNKFLAGS =" "LIBS= -ljobs"
#Masscomp/Concurrent RTU 4.0 or later, Berkeley environment.
#Includes <ndir.h> = /usr/include/ndir.h
#Note "LIBS = -lndir" might not be necessary because of "ucb make".
rtubsd:
@echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.1A...'
ucb make wermit \
"CFLAGS= -DBSD4 -DRTU -DNDIR -DHDBUUCP -DTCPSOCKET $(KFLAGS)" \
"LIBS = -lndir"
#Masscomp/Concurrent RTU 4.0 or later, same as above,
#Includes "usr/lib/ndir.h"
#Note "LIBS = -lndir" might not be necessary because of "ucb make".
rtubsd2:
@echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.1A...'
ucb make wermit \
"CFLAGS= -DBSD4 -DRTU -DXNDIR -DHDBUUCP $(KFLAGS)" \
"LIBS = -lndir"
#Masscomp/Concurrent RTU 4.0 or later, same as above,
#Includes <sys/ndir.h>
#Note "LIBS = -lndir" might not be necessary because of "ucb make".
rtubsd3:
@echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.x BSD...'
ucb make wermit "CFLAGS= -DBSD4 -DRTU -DHDBUUCP $(KFLAGS)" \
"LIBS = -lndir"
#Masscomp/Concurrent RTU 4.0 or later, System V R2, using <dirent.h>.
#In case of problems, add back the -DRTU switch.
#In case -DTCPSOCKET gives trouble, remove it.
rtus5:
@echo 'Making C-Kermit $(CKVER) for Masscomp RTU 4.x...'
$(MAKE) wermit \
"CFLAGS= -DATTSV -DHDBUUCP -DDIRENT -DTCPSOCKET $(KFLAGS)"
#Masscomp/Concurrent RTU 4.x, System V R3, using <dirent.h>.
#Use this one if rtus5 gives warnings about pointer type mismatches.
#In case of problems, add back the -DRTU switch.
rtus5r3:
@echo 'Making C-Kermit $(CKVER) for Masscomp RTU Sys V R3...'
$(MAKE) wermit "CFLAGS= -DSVR3 -DHDBUUCP -DDIRENT $(KFLAGS)"
#DEC Pro-3xx with Pro/Venix V1.0 or V1.1
# Requires code-mapping on non-I&D-space 11/23 processor, plus some
# fiddling to get interrupt targets into resident code section.
# This almost certainly doesn't work any more.
provx1:
@echo 'Making C-Kermit $(CKVER) for DEC Pro-3xx, Pro/Venix 1.x...'
$(MAKE) wart "CFLAGS= -DPROVX1 $(KFLAGS)" "LNKFLAGS= "
$(MAKE) wermit "CFLAGS = -DPROVX1 -DNOFILEH -md780" \
"LNKFLAGS= -u _sleep -lc -md780"
#Nixdorf Targon/31.
#AT&T UNIX System V R3, signal() is void rather than int.
#Uses dirent.h without Honey DanBer uucp.
t31tos40x:
@echo 'Making C-Kermit $(CKVER) for Targon/31 with TOS 4.0.xx...'
$(MAKE) wermit \
"CFLAGS= -DSVR3 -DDIRENT $(KFLAGS) -O" \
"LNKFLAGS="
#NCR Tower 1632, OS 1.02
tower1:
@echo 'Making C-Kermit $(CKVER) for NCR Tower 1632, OS 1.02...'
$(MAKE) wermit "CFLAGS= -DTOWER1 $(KFLAGS)"
#NCR Tower 32, OS Release 1.xx.xx
tower32-1:
@echo 'Making C-Kermit $(CKVER) for NCR Tower 32 Rel 1 System V R2...'
@echo 'Add KFLAGS=-DISDIRBUG if you get errors about S_ISREG/S_ISDIR.'
$(MAKE) wermit \
"CFLAGS = -DATTSV $(KFLAGS) -O" "LNKFLAGS = -n"
#NCR Tower 32, OS Release 2.xx.xx
tower32-2:
@echo 'Making C-Kermit $(CKVER) for NCR Tower 32 Rel 2 System V R2...'
$(MAKE) wermit \
"CFLAGS = -DATTSV -DHDBUUCP $(KFLAGS) -O2" \
"LNKFLAGS = -n"
#NCR Tower 32, OS Releases based on System V R3
#Don't add -DNAP (doesn't work right) or -DRDCHK (not available in libc).
tower32:
@echo 'Making C-Kermit $(CKVER) for NCR Tower 32 System V R3...'
$(MAKE) wermit \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNOSYSIOCTLH $(KFLAGS) \
-DUID_T=ushort -DGID_T=ushort -O1"
#NCR Tower 32, OS Releases based on System V R3
tower32g:
@echo 'Making C-Kermit $(CKVER) for NCR Tower 32 System V R3, gcc...'
$(MAKE) wermit "CC = gcc" \
"CFLAGS = -DSVR3 -DDIRENT -DHDBUUCP -DNOSYSIOCTLH $(KFLAGS) \
DUID_T=ushort -DGID_T=ushort -O -fstrength-reduce -fomit-frame-pointer"
#Fortune 32:16, For:Pro 1.8 (mostly like 4.1bsd)
ft18:
@echo 'Making C-Kermit $(CKVER) for Fortune 32:16 For:Pro 1.8...'
$(MAKE) wermit \
"CFLAGS= -DNODEBUG -DBSD4 -DFT18 -DNOFILEH $(KFLAGS) \
-DPID_T=short"
#Fortune 32:16, For:Pro 2.1 (mostly like 4.1bsd).
#The modules that break the optimizer are compiled separately.
ft21:
@echo 'Making C-Kermit $(CKVER) for Fortune 32:16 For:Pro 2.1...'
$(MAKE) ckuusx.$(EXT) "CFLAGS= -DNODEBUG -DBSD4 -DFT21 -DNOFILEH \
-SYM 800 -DCK_CURSES $(KFLAGS) -DPID_T=short" \
"LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet"
$(MAKE) ckuxla.$(EXT) "CFLAGS= -DNODEBUG -DBSD4 -DFT21 -DNOFILEH \
-SYM 800 -DCK_CURSES $(KFLAGS) -DPID_T=short" \
"LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet"
$(MAKE) ckudia.$(EXT) "CFLAGS= -DNODEBUG -DBSD4 -DFT21 -DNOFILEH \
-SYM 800 -DCK_CURSES $(KFLAGS) -DPID_T=short" \
"LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet"
$(MAKE) wermit \
"CFLAGS= -O -DNODEBUG -DBSD4 -DFT21 -DNOFILEH -SYM 800 \
-DCK_CURSES $(KFLAGS) -DPID_T=short" \
"LNKFLAGS= -n -s" "LIBS= -lcurses -ltermcap -lv -lnet"
#Valid Scaldstar
#Berkeleyish, but need to change some variable names.
valid:
@echo 'Making C-Kermit $(CKVER) for Valid Scaldstar...'
$(MAKE) wermit \
"CFLAGS= -DBSD4 -DNODEBUG -DNOTLOG -Dcc=ccx -DFREAD=1 $(KFLAGS)"
#IBM IX/370 on IBM 370 Series mainframes
#Mostly like sys3, but should buffer packets.
ix370:
@echo 'Making C-Kermit $(CKVER) for IBM IX/370...'
$(MAKE) wermit "CFLAGS = -DIX370 -DATTSV $(KFLAGS) -i -O" \
"LNKFLAGS = -i"
#Amdahl UTS 2.4 on IBM 370 series compatible mainframes.
#Mostly like V7, but can't do initrawq() buffer peeking.
uts24:
@echo 'Making C-Kermit $(CKVER) for Amdahl UTS 2.4...'
$(MAKE) wermit "CFLAGS=-DV7 -DPROCNAME=\\\"$(PROC)\\\" \
-DUTS24 -DBOOTNAME=\\\"$(BOOTFILE)\\\" -DNPROCNAME=\\\"$(NPROC)\\\" \
-DNPTYPE=$(NPTYPE) $(DIRECT) $(KFLAGS)"
#Amdahl UTSV UNIX System V = System V R2 or earlier.
utsv:
@echo 'Making C-Kermit $(CKVER) for Amdahl UTSV...'
$(MAKE) wermit \
"CFLAGS = -DUTSV $(KFLAGS) -i -O" "LNKFLAGS = -i"
#Amdahl UTSV UNIX System V = System V R2 or earlier, with TCP sockets library.
utsvtcp:
@echo 'Making C-Kermit $(CKVER) for Amdahl UTSV w/tcp...'
$(MAKE) wermit "CFLAGS = \
-DTCPSOCKET -DUTSV $(KFLAGS) -i -O" "LNKFLAGS = -i" \
"LIBS = -lsocket"
#BBN C/70 with IOS 2.0
#Mostly Berkeley-like, but with some ATTisms
c70:
@echo 'Making C-Kermit $(CKVER) for BBN C/70 IOS 2.0...'
$(MAKE) wermit "CFLAGS= -DBSD4 -DC70 $(KFLAGS)"
#Zilog ZEUS 3.21
zilog:
@echo 'Making C-Kermit $(CKVER) for Zilog Zeus 3.21...'
$(MAKE) wermit \
"CFLAGS = -DATTSV -DZILOG -DNODEBUG $(KFLAGS) -i -O" \
"LNKFLAGS = -i -lpw"
#Whitechapel MG-1 Genix 1.3
white:
@echo 'Making C-Kermit $(CKVER) for Whitechapel MG-1 Genix 1.3...'
@touch ckcpro.c
$(MAKE) wermit "CFLAGS= -DBSD4 -Dzkself()=0 $(KFLAGS)"
#Pixel 1000
pixel:
@echo 'Making C-Kermit $(CKVER) for Pixel 1000...'
$(MAKE) wermit "CFLAGS= -DBSD4 -Dzkself()=0 $(KFLAGS)"
ptx:
$(MAKE) "MAKE=$(MAKE)" dynixptx12
#CDC VX/VE 5.2.1
vxve:
@echo 'Making C-Kermit $(CKVER) for CDC VX/VE 5.2.1...'
$(MAKE) wermit \
"CFLAGS = -DATTSV -DVXVE -DNODEBUG -DNOTLOG $(KFLAGS) -i -O" \
"LNKFLAGS = -i"
#DIAB DS90 or LUXOR ABC-9000 with pre-5.2 DNIX. Sys V with nap() and rdchk().
# nd = no opendir(), readdir(), closedir(), etc.
# Some of the modules fail to compile with -O.
dnixnd:
@echo 'Making C-Kermit $(CKVER) for DIAB DS90 with very old DNIX 5.2.'
$(MAKE) wermit \
"CFLAGS = -DATTSV -DNAP -DRDCHK -DDCLPOPEN \
-U__STDC__ $(KFLAGS)"
#DIAB DS90 with DNIX 5.2. Sys V with nap() and rdchk().
# This one has opendir(), readdir(), closedir(), etc.
# Some of the modules fail to compile with -O.
dnix:
@echo 'Making C-Kermit $(CKVER) for DIAB DS90 with old DNIX 5.2...'
$(MAKE) wermit \
"CFLAGS = -DATTSV -DNAP -DRDCHK -DDIRENT \
-U__STDC__ $(KFLAGS)"
#DIAB DS90 with DNIX 5.2. Sys V with nap() and rdchk().
# As above, but with curses and TCP/IP.
# You might get complaints about redefinition of O_RDONLY, etc, because
# of bugs in the DNIX header files, which can be fixed by adding #ifndef...
# around the offending definitions in the header files.
dnixnetc:
@echo 'Making C-Kermit $(CKVER) for DIAB DS90 with old DNIX 5.2...'
$(MAKE) wermit \
"CFLAGS = -DATTSV -DNAP -DRDCHK -DDIRENT \
-DTCPSOCKET -DCK_CURSES -I/usr/include/bsd -U__STDC__ $(KFLAGS)" \
"LIBS = -ln -lcurses"
#DIAB DS90 with DNIX 5.3 or later, with HDB UUCP, nap() and rdchk().
dnix5r3:
@echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...'
@echo 'with Honey DanBer UUCP'
$(MAKE) wermit \
"CFLAGS = -DSVR3 -DHDBUUCP -DNAP -DRDCHK -DDIRENT \
-DCK_CURSES -DRENAME $(KFLAGS) -O" "LIBS= -lcurses"
#DIAB DS90 with DNIX 5.3 or later, with HDB UUCP, nap() and rdchk() + TCP/IP
dnix5r3net:
@echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...'
@echo 'with Honey DanBer UUCP and TCP/IP'
$(MAKE) wermit \
"CFLAGS = -DSVR3 -DHDBUUCP -DNAP -DRDCHK -DDIRENT \
-DTCPSOCKET -DCK_CURSES -DRENAME $(KFLAGS) -O \
-I/usr/include/bsd" "LIBS = -ln -lcurses"
#DIAB DS90 with DNIX 5.3 2.2 or later, with HDB UUCP, nap() and rdchk(),
#ANSI C compilation and libraries.
#Note that for DNIX 5.3 2.2 you have to correct a bug in /usr/include/stdlib.h:
#change "extern void free(char *str);"
#to "extern void free(void *str);"
#NOTE: This bug is reportedly fixed in DNIX 5.3 2.2.1.
#Should you get fatal errors caused by harmless pointer-type mismatches,
#like between signed and unsigned char, just remove -X7.
dnix5r3ansi:
@echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...'
@echo 'with ANSI C Honey DanBer UUCP'
$(MAKE) wermit \
"CFLAGS = -DSVR3 -DDIAB -DHDBUUCP -DNAP -DRDCHK -DDIRENT \
-DCK_ANSILIBS -DCK_CURSES -DRENAME -O -X7 -X9 $(KFLAGS)" \
"LIBS= -lcurses"
#DIAB DS90 with DNIX 5.3 2.2 or later, with HDB UUCP, nap() and rdchk(),
# + TCP/IP, ANSI C compilation and libraries.
#Should you get fatal errors caused by harmless pointer-type mismatches,
#like between signed and unsigned char, just remove -X7.
dnix5r3ansinet:
@echo 'Making C-Kermit $(CKVER) for DIAB DS90 with DNIX 5.3...'
@echo 'with ANSI C Honey DanBer UUCP'
$(MAKE) wermit \
"CFLAGS = -DSVR3 -DDIAB -DHDBUUCP -DNAP -DRDCHK -DDIRENT \
-DTCPSOCKET -DCK_ANSILIBS -DCK_CURSES -DRENAME -O -X7 -X9 $(KFLAGS) \
-I/usr/include/bsd" "LIBS= -ln -lcurses"
# QNX 4.21 and above, 32-bit version, Watcom C32 10.6, register calling
# conventions, fully configured, except no job control because QNX 4.x
# does not support it. New NCURSES library used instead of CURSES.
#
# -Oatx optimizes to favor speed over size: loop optimization, inline fn's.
# -Os favors size over speed. The size difference is about 30-40K.
# -NOUUCP is included because QNX is shipped without UUCP and no native
# QNX software uses UUCP lockfiles. Remove -DNOUUCP if you want to use
# UUCP lockfiles for exclusive access to dialout devices.
#
# If you get warnings about HEADER or C_IN add -DNO_DNS_SRV.
qnx32:
@echo 'Making C-Kermit $(CKVER) for QNX 4.2x, 32-bit...'
$(MAKE) xermit \
"LNKFLAGS = -3r" \
"CFLAGS = -3r -ms -DQNX -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL \
-DCK_WREFRESH -DCK_REDIR -DSELECT -DSELECT_H -DCK_RTSCTS -DNOJC \
-DNOINITGROUPS -DNOUUCP -DCK_ANSIC -DPID_T=pid_t -Oatx -zc $(KFLAGS)" \
"LIBS= -lsocket -lncurses -ltermcap"
@wermit -h >use.qnx
@usemsg wermit use.qnx
@rm use.qnx
# As above but no networking since some QNX systems do not have TCP/IP
# installed, or the TCP/IP developers kit, which includes all the needed
# header files. This entry has not been tested on a QNX system that, in
# fact, does not have TCP/IP installed; some adjustments might be necessary,
# in particular regarding the use of select(): is -lsocket needed, can we
# get the needed definitions from non-TCP/IP header files (FD_SET, etc)?
qnx32nonet:
@echo 'Making C-Kermit $(CKVER) for QNX 4.2x, 32-bit, no net...'
$(MAKE) xermit \
"LNKFLAGS = -3r" \
"CFLAGS = -3r -ms -DQNX -DNONET -DNOIKSD -DCK_CURSES \
-DCK_WREFRESH -DCK_REDIR -DSELECT -DSELECT_H -DCK_RTSCTS -DNOJC \
-DNOUUCP -DCK_ANSIC -DPID_T=pid_t -Oatx -zc $(KFLAGS)" \
"LIBS= -lsocket -lncurses -ltermcap"
@wermit -h >use.qnx
@usemsg wermit use.qnx
@rm use.qnx
# Synonym for qnx32.
qnx:
$(MAKE) qnx32 "KFLAGS=$(KFLAGS)"
# QNX 4.21 and above, 16-bit version, Watcom C 8.5 - and higher on i286 PCs
# and above.
#
# IMPORTANT: Do not use Watcom C 10.6!!!
# If you have it installed, add "-v9.52 to CFLAGS"
#
# NOTE: QNX 4.23 onward does not work on 286's anyway.
# Stacksize 26000, objects larger than 100 bytes in their own segments,
# string constants to the codesegment, etc. Fully configured except job ctrl.
# This entry works for building a 16-bit executable on a 32-bit system, but
# has not been tested on a 16-bit system. Uses large memory model, links
# explicitly with large-model sockets library. Correct-model curses library
# is chosen automatically. See comment in qnx32 entry about -DNOUUCP.
#
# WARNING:
#
# Watcom C prior to 10.6 never had released curses library. To link against it,
# you must obtain ported free curses source from ftp://ftp.qnx.com/usr/free,
# then compile and build library (cursesl.lib) and place it in /usr/lib. You
# must also copy curses.h to /usr/include. Be aware that if you have Watcom
# 10.6 installed, you should already have curses.h, which is the new ncurses
# library. You must back it up and use free curses.h instead, since ncurses is
# only for 32-bit applications and some definitions in these files are
# different (e.g., clearok()). For safety, curses is not defined in build.
#
# In 7.0 -DNOHELP added to keep ckuus2.c from blowing up; NOCSETS and NOSPL
# added because ckuus4 was blowing up, and NOFLOAT just because it seemed
# dangerous (remove -DNOFLOAT if you want to try it), The result works OK
# except for some mysterious beeps upon termination of the top-level keyword.
#
# Things to try next time we get in trouble:
# . Change -zt100 to something smaller like -zt25
# . Change -Oatx to -Omilerat (enable stack checking)
# . Maybe get rid of -v9.52 -- it's only there because we were warned.
#
qnx16:
@echo 'Making C-Kermit $(CKVER) for QNX 4.21, 16-bit...'
$(MAKE) xermit \
"LNKFLAGS = -2 -ml -N 26000" \
"CFLAGS = -2 -Oatx -zc -zt100 -ml -DQNX -DQNX16 -DNOUUCP -DNOHELP \
-DCK_REDIR -DSELECT -DSELECT_H -DNOJC -DNOGETUSERSHELL -DNOCSETS \
-v9.52 -DTCPSOCKET -DCK_RTSCTS -DCK_ANSIC -DNOINITGROUPS -DNOKVERBS \
-DNORANDOM -DNOCSETS -DNOSPL -DNOFLOAT -DPID_T=pid_t $(KFLAGS)"
# QNX 4.1, 16-bit version, with Watcom C 8.5 on i286 PCs and above.
# stacksize 26000, objects larger than 100 bytes in their own segments,
# string constants to the codesegment, etc. Add -DNOUUCP if desired.
qnx16_41:
@echo 'Making C-Kermit $(CKVER) for QNX 4.1, 16-bit...'
$(MAKE) xermit \
"LNKFLAGS = -mh -N 26000" "CFLAGS = -Wc,-fpc -Wc,-j -DNOGETUSERSHELL \
-Wc,-Ols -Wc,-zdf -Wc,-zc -Wc,-zt100 -mh -DPOSIX -DQNX -DDIRENT \
-DNOCYRIL -DNODEBUG -DNOMSEND -DMINIDIAL -DNOXMIT -DNOSCRIPT -DNOSPL \
-DNOSETKEY -DNOINITGROUPS -DPID_T=pid_t $(KFLAGS)"
# QNX Neutrino 2 (pwaechtler@qnx.de) crosscompiled on QNX 4.25.
qnx_nto2+:
@echo 'Making C-Kermit $(CKVER) for QNX Neutrino 2+ '
$(MAKE) xermit \
"CC = qcc -Vgcc_ntox86" \
"CC2 = qcc -Vgcc_ntox86" \
"LNKFLAGS = " \
"CFLAGS = -DTCPSOCKET -DCK_CURSES -DNOGETUSERSHELL \
-DCK_WREFRESH -DCK_REDIR -DSELECT -DSELECT_H -DCK_RTSCTS -DNOJC \
-DNOINITGROUPS -DCK_ANSIC -DPID_T=pid_t -DUNIX -DDIRENT -DMYREAD \
-DBSD44ORPOSIX -DSVORPOSIX -DNDGPWNAM $(KFLAGS)" \
"LIBS= -lsocket -lncurses "
#Ridge 32 with ROS 3.2
ridge32:
@echo 'Making C-Kermit $(CKVER) Ridge 32 ROS 3.2'
$(MAKE) wermit \
"CFLAGS = -DATTSV -DNOFILEH -DNODEBUG -DNOTLOG $(KFLAGS) -i -O" \
"LNKFLAGS = -i"
#Altos 486, 586, or 986 with Xenix 3.0
altos:
@echo 'Making C-Kermit $(CKVER) for Altos x86 with Xenix 3.0...'
$(MAKE) wermit \
"CFLAGS= -DATTSV -DA986 -DNODEBUG -DNOTLOG $(KFLAGS) -i -O" \
"LNKFLAGS= -i"
#Altos 986 with Xenix 3.0, as above, but command-line only, minimal size.
#For systems with small memories. It might also be necessary to chop certain
#modules up into smaller pieces, e.g. ckuus3-6, because of symbol table
#overflow. If this makefile is too big or complex for the Altos, compile
#and link by hand or write shell scripts.
altosc:
@echo 'Making C-Kermit $(CKVER) for Altos x86 Xenix 3.0, remote...'
$(MAKE) wermit \
"CFLAGS= -DATTSV -DA986 -DNODEBUG -DNOTLOG -DNOSCRIPT -DNODIAL \
-DNOCSETS -DNOANSI -DNOMSEND -DNOSPL -DNOICP $(KFLAGS) -Mm -O" \
"LNKFLAGS= -Mm -s"
#Altos 986 with Xenix 3.0, as above, but interactive only, minimal size.
altosi:
@echo 'Making C-Kermit $(CKVER) for Altos x86 Xenix 3.0, local...'
$(MAKE) wermit \
"CFLAGS= -DATTSV -DA986 -DNODEBUG -DNOTLOG -DNOSCRIPT -DNODIAL \
-DNOCSETS -DNOANSI -DNOMSEND -DNOSPL -DNOCMDL -DNOFRILLS -DNOHELP \
-DNOSETKEY $(KFLAGS) -Mm -O" "LNKFLAGS= -Mm -s"
# Altos ACS68000 68000 System, UNIX System 3 Release 2, 512k memory.
# also needs getcwd() external function; see ckuins.txt file.
# also, sys/types.h needed modifying:
# #ifdef __SYS_TYPES_H__, #define ..., #endif
# also, ckuus2.c MUST be compiled NOOPT else symbol table is destroyed!
# Submission by Robert Weiner/Programming Plus, rweiner@progplus.com.
#
altos3:
@echo 'Making C-Kermit $(CKVER) for Altos ACS68k UNIX System III'
$(MAKE) ckuus2.$(EXT) "CFLAGS = -DATTSV -DNOCSETS -DNOSETKEY -DNOJC \
-DNODIAL -DDCLPOPEN -DNOSCRIPT -DNOHELP $(KFLAGS) -i"
$(MAKE) wermit \
"CFLAGS = -DATTSV -DNOCSETS -DNOSETKEY -DNOJC \
-DNODIAL -DDCLPOPEN -DNOSCRIPT -DNOHELP $(KFLAGS) -i -O" \
"LNKFLAGS = -i" "LIBS = getcwd.$(EXT)"
#MINIX - Original PC version with 64K+64K limit.
# Reportedly, the linker (asld) can run out of space while linking. The only
# way around this is to make a copy of libc.a from which all modules that are
# not used by Kermit are removed. If you have trouble compiling or running
# wart, "touch wart". If that doesn't help, "touch ckcpro.c".
# The version configured below has no interactive command parser.
# If you can build this version successfully, maybe there will be room for
# a minimal interactive command parser too; try replacing -DNOICP with
# -DNOSPL, plus every other -DNOxxx flag there is, except for -DNOICP
# (see ckccfg.txt).
minix:
@echo 'Making C-Kermit $(CKVER) for MINIX, no command parser...
@echo 'TOTALLY UNTESTED!'
$(MAKE) wermit EXT=s \
"CFLAGS= -DV7 -DMINIX -i -D_MINIX -D_POSIX_SOURCE \
-DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V \
-DNOXMIT -DNOMSEND -DNOFRILLS -DNODIAL -DNOHELP -DNODEBUG -DNOTLOG \
-DNOSCRIPT -DNOCSETS -DNOICP -DNOSETKEY $(KFLAGS)" \
"LNKFLAGS= -i -T"
#MINIX - PC version with 64K+64K limit, new (as yet unreleased) ACK 2.0 beta C
#compiler, which outputs .o object files, rather than .s. But 'make' still
#expects .s files, so must be patched to use .o. Tested on Minix 1.5.10.
minixnew:
@echo 'Making C-Kermit $(CKVER) for MINIX (new ACK 2.0 compiler),'
@echo 'no command parser... TOTALLY UNTESTED!'
$(MAKE) wermit \
"CFLAGS= -DV7 -DMINIX -i -D_MINIX -D_POSIX_SOURCE \
-DPID_T=pid_t -DUID_T=uid_t -DGID_T=gid_t -DSIG_V -DNODIAL \
-DNOHELP -DNODEBUG -DNOTLOG -DNOSCRIPT -DNOCSETS -DNOICP $(KFLAGS)" \
"LNKFLAGS= -i -T"
#PFU Compact A Series UNIX System V R3, SX/A TISP V10/L50 (Japan)
#Maybe the -i link option should be removed?
sxae50:
@echo 'Making C-Kermit $(CKVER) for PFU SX/A V10/L50...'
$(MAKE) xermit \
"CFLAGS= -DSVR3 -DDIRENT -DsxaE50 -DTCPSOCKET $(KFLAGS) -i -O" \
"LNKFLAGS= "
#Tektronix 6130, 4319, 4301, etc, with UTek OS, /usr/spool/uucp/LCK./...
#The models that support hardware flow control.
utek:
@echo 'Making C-Kermit $(CKVER) for 4.2BSD/UTek, hardware flow control'
$(MAKE) wermit \
"CFLAGS= -O -DLCKDIR -DBSD4 -DTCPSOCKET \
-DUTEK -DDCLPOPEN -DLOCK_DIR=\\\"/usr/spool/uucp/LCK.\\\" \
-DTRMBUFL=2048 -DCK_DTRCTS $(KFLAGS)"
#Tektronix 4315, 4316, 4317 with UTek OS, /usr/spool/uucp/LCK./...
#The models that do not fully support hardware flow control.
uteknohwfc:
@echo 'Making C-Kermit $(CKVER) for 4.2BSD/UTek, no h/w flow control'
$(MAKE) wermit \
"CFLAGS= -O -DLCKDIR -DBSD4 -DTCPSOCKET \
-DUTEK -DDCLPOPEN -DLOCK_DIR=\\\"/usr/spool/uucp/LCK.\\\" \
-DTRMBUFL=2048 $(KFLAGS)"
#Tektronix XD88 with UTekV OS
utekvr3:
@echo 'Making C-Kermit $(CKVER) for Tektronix XD88 UTekV R3...'
$(MAKE) wermit \
"CFLAGS= -DSVR3 -DDIRENT -DHDBUUCP \
-DTCPSOCKET -DSYSUTIMEH -DCK_CURSES $(KFLAGS) -O" \
"LIBS= -lcurses" "LNKFLAGS= -s"
#Perkin-Elmer 3200 Xelos R02 or earlier
ccop1:
@echo 'Making C-Kermit $(CKVER) for Xelos & Public Domain Dirent calls'
@echo 'or System V R2 or earlier...'
$(MAKE) wermit \
"CFLAGS = -DATTSV -Dvoid=int -DDIRENT -DCK_CURSES \
$(KFLAGS) -O" "LNKFLAGS =" "LIBS= -lcurses -ltermlib"
#Encore, UMAX 4.3 (BSD) but without acucntrl program.
encore:
$(MAKE) "MAKE=$(MAKE)" umax43 "KFLAGS=$(KFLAGS)"
#Encore, as above, but with curses file transfer display included.
encorec:
$(MAKE) "MAKE=$(MAKE)" umax43 "KFLAGS=-DCK_CURSES $(KFLAGS)" \
"LIBS= -lcurses -ltermcap"
#Encore, UMAX 4.3 (BSD) but without acucntrl program.
umax43:
@echo Making C-Kermit $(CKVER) for Encore UMAX 4.3...
$(MAKE) "MAKE=$(MAKE)" PARALLEL=4 xermit \
"CFLAGS= -DBSD43 -DENCORE -DTCPSOCKET $(KFLAGS) -O"
#Encore, UMAX 4.2 (BSD)
umax42:
@echo Making C-Kermit $(CKVER) for Encore UMAX 4.2...
$(MAKE) "MAKE=$(MAKE)" PARALLEL=4 xermit \
"CFLAGS= -DBSD4 -DENCORE -DTCPSOCKET $(KFLAGS) -O"
#Encore 88K UMAX 5.3 with TCP/IP support
encore88k:
@echo 'Making C-Kermit $(CKVER) for Encore 88K UMAX V, TCP/IP...'
$(MAKE) xermit \
"CFLAGS = -q ext=pcc -DSVR3 -DTCPSOCKET -DDIRENT \
-DNOGETID_PROTOS -DHDBUUCP $(KFLAGS) -O" "LNKFLAGS ="
#Encore 88K UMAX 5.3 with TCP/IP support
encore88kgcc:
@echo 'Making C-Kermit $(CKVER) for Encore 88K UMAX V, TCP/IP, gcc...'
$(MAKE) xermit CC=gcc CC2=gcc \
"CFLAGS = -DSVR3 -DTCPSOCKET -DDIRENT \
-DNOGETID_PROTOS -DHDBUUCP $(KFLAGS) -O" "LNKFLAGS ="
#SONY NEWS, NEWS-OS 4.01C
sonynews:
@echo Making C-Kermit $(CKVER) for SONY NEWS-OS 4.01C...
$(MAKE) xermit "CFLAGS= -DBSD43 -DACUCNTRL -DTCPSOCKET -O"
#Run Lint on this mess for selected versions.
#These are pretty much obsolete since ANSI C / gcc.
lintsun:
@echo 'Running Lint on C-Kermit $(CKVER) sources for SunOS version...'
lint -x -DSUNOS4 -DDIRENT -DTCPSOCKET -DSAVEDUID \
ck[cu]*.c > ckuker.lint.sun
lintbsd:
@echo 'Running Lint on C-Kermit $(CKVER) sources for BSD 4.2 version..'
lint -x -DBSD4 -DTCPSOCKET ck[cu]*.c > ckuker.lint.bsd42
lints5:
@echo 'Running Lint on C-Kermit $(CKVER) sources for Sys V version...'
lint -x -DATTSV ck[cu]*.c > ckuker.lint.s5
#Who remembers TECO?
love:
@echo 'Not war?'
