Columbia Kermit/kermit.zip/old/ckermit60/ckuker.cpp

C/C++ Source or Header | 2020-01-01 | 41KB | 1,035 lines

.\" @(#) kermit.1 6.0.192 96/09/06 Columbia University
#ifdef COMMENT
This man page must be run through the C-Kermit makefile before it can
be used: "make manpage".  Or you can do the following:
  cc -E ckuker.cpp | grep -v ^$ | grep -v ^\# > ckuker.nr
to produce the nroff source file.  THIS FILE MUST NOT CONTAIN ANY BLANK LINES!
Use .sp or similar commands to produce blank lines in the nroff output.
#endif /* COMMENT */
#ifdef SUNOS4
#define SUNOS
#else
#ifdef SUNOS41
#define SUNOS
#else
#ifdef SOLARIS
#define SUNOS
#endif
#endif
#endif
#ifdef HPUX10
.TH KERMIT 1 "6 Sep 96" "HP-UX C-Kermit"
#define DIALOUT /dev/cul0p0
#define HARDWIRE /dev/tty0p0
#else
.TH KERMIT 1C "6 Sep 96" "UNIX C-Kermit"
#define DIALOUT /dev/cua
#define HARDWIRE /dev/tty01
#endif
.SH NAME
kermit \- C-Kermit 6.0.192 communications software for serial and network
connections: modem dialing, file transfer and management, terminal connection,
character-set translation, and script programming.
.SH SYNOPSIS
.B kermit
[ command-file ] [ options ... ]
.SH DESCRIPTION
.I Kermit
is a family of file transfer, management, and communication software programs
from Columbia University available for most computers and operating systems.
#ifdef HPUX10
The version of Kermit for Hewlett-Packard HP-UX, called
#else
#ifdef SUNOS
The version of Kermit for SunOS and Solaris, called
#else
The UNIX version of Kermit, called
#endif
#endif
.IR "C-Kermit",
#ifdef HPUX10
supports both serial connections (direct or dialed) and TCP/IP connections.
#else
#ifdef SUNOS
supports serial connections (direct or dialed),
TCP/IP connections, and on systems equipped with
SunLink X.25, C-Kermit can also make X.25 connections.
#else
supports serial connections (direct or dialed) and, in most UNIX
implementations, also TCP/IP connections.  On SunOS systems equipped with
SunLink X.25, C-Kermit can also make X.25 connections.
#endif
#endif
C-Kermit can be thought of as a user-friendly and powerful alternative to cu,
tip, uucp, ftp, and telnet; a single package for both network and serial
communications, offering automation, convenience, and language features not
found in the other packages, and having a great deal in common with its
cousins, C-Kermit on other UNIX platforms, Kermit 95 for Windows 95 and NT and
OS/2, MS-DOS Kermit for PCs with DOS and Windows 3.x, and IBM Mainframe
Kermit-370 for VM/CMS, MVS/TSO, and CICS.  C-Kermit itself also runs on
Digital VMS, Data General AOS/VS, Stratus VOS, OS-9, QNX, the BeBox, Plan 9,
the Commodore Amiga, and elsewhere.  Together, C-Kermit, Kermit 95, MS-DOS
Kermit, and IBM Mainframe Kermit offer a consistent and nearly universal
approach to inter-computer communications.
.PP
C-Kermit 6.0.192 is Copyright (C) 1985, 1996 by the Trustees of Columbia
University in the City of New York.  The C-Kermit software may not be, in
whole or in part, licensed or sold for profit as a software product itself,
nor may it be included in or distributed with commercial products or otherwise
distributed by commercial concerns to their clients or customers without
written permission of the Office of Kermit Development and Distribution,
Columbia University.  This copyright notice must not be removed, altered, or
obscured.
.PP
#ifdef HPUX10
C-Kermit 6.0.192 is included with HP-UX 10.00 and later by Hewlett-Packard in
partnership with the Kermit Project at Columbia University.
#endif
.PP
C-Kermit 6.0 is thoroughly documented in the book
.IR "Using C-Kermit"
by Frank da Cruz and Christine M. Gianone, Digital Press, Second Edition,
1997; see REFERENCES
at the end of this manual page.  This manual page is not a substitute for the
book.  If you are a serious user of C-Kermit, particularly if plan to write
C-Kermit script programs, you should purchase the manual.  Book sales are the
primary source of funding for the nonprofit Kermit Project.
.PP
Any new features added since most recent edition of the book was
published are documented in the online file
.IR "ckermit.upd".
Hints, tips, limitations, restrictions are listed in
.IR "ckcker.bwr"
(general C-Kermit) and
.IR "ckuker.bwr"
(UNIX-specific); see FILES below.  Please consult all of these references
before reporting problems or asking for technical support.
.PP
Kermit software is available for hundreds of different computers and operating
systems from Columbia University.  For best file-transfer results, please use
C-Kermit in conjunction with real Columbia University Kermit software on other
computers, such as Kermit 95 for Windows 95 and NT or MS-DOS Kermit for DOS
3.x or Windows.  See CONTACTS below.
.SH "MODES OF OPERATION"
C-Kermit can be used in two "modes": remote and local.  In
.IR "remote mode",
you connect to the
#ifdef HPUX10
HP-UX
#else
UNIX
#endif
system from a desktop computer
and transfer files between your desktop computer and
#ifdef HPUX10
HP-UX
#else
UNIX
#endif
C-Kermit.  In that
case, connection establishment (dialing, TELNET connection, etc) is handled
by the Kermit program on your desktop computer.
.PP
In
.IR "local mode",
C-Kermit establishes a connection to another computer
by direct serial connection, by dialing a modem, or by making a network
connection.  When used in local mode, C-Kermit gives you a terminal connection
to the remote computer, using your actual terminal, emulator, or UNIX
workstation terminal window or console driver for specific terminal emulation.
.PP
C-Kermit also has two types of commands: the familiar UNIX-style command-line
options, and an interactive dialog with a prompt.
.IR "Command-line options"
give
you access to a small but useful subset of C-Kermit's features for terminal
connection and file transfer, plus the ability to pipe files into or out of
Kermit for transfer.
.PP
.IR "Interactive commands"
give you access to dialing, script programming,
character-set translation, and, in general, detailed control and display of all
C-Kermit's features.  Interactive commands can also be collected into command
files or macros.
.PP
.SH "STARTING C-KERMIT"
.PP
#ifdef HPUX10
You can start C-Kermit by typing "/usr/bin/kermit", or just "kermit" if your
PATH includes "/usr/bin", possibly followed by command-line options.
#else
C-Kermit should be available as "kermit" somewhere in your PATH, perhaps as
/usr/local/bin/kermit, in which case you can
start C-Kermit just by typing "kermit", possibly followed by command-line
options.
#endif
If there are no "action options" on the command line (explained
below), C-Kermit starts in interactive command mode; you will see a greeting
message and then the "C-Kermit>" prompt.  If you do include action options on
the command line, C-Kermit takes the indicated actions and then exits directly
back to UNIX.  Either way, C-Kermit executes the commands in its
initialization file,
#ifdef HPUX10
.IR "/usr/share/lib/kermit/ckermit.ini" ,
#else
.IR ".kermrc" ,
in your home directory (or a system-wide directory if C-Kermit was built to
do this)
#endif
before it executes any other commands, unless you have
included the `\|\c
.B \-Y\c
\&\|' (uppercase) command-line option, which means to skip the
initialization file, or you have included the `\|\c
.B -y \c
\&\|
.IR "filename" \c
\&\|'
option to specify an alternative initialization file.
.PP
.SH "FILE TRANSFER"
.PP
Here is the most common scenario for Kermit file transfer.  Many other
methods are possible, most of them more convenient, but this basic method
should work in all cases.
.PP
.in +0.5i
.ll -0.5i
.ta +0.2i
.ti -0.2i
\(bu    Start Kermit on your local computer and establish a connection to the
remote computer.  If C-Kermit is on your local
computer, use the sequence SET MODEM TYPE
.IR "modem-name" \c
\&\|, SET LINE
.IR "device-name" \c
\&\|, SET SPEED
.IR "bits-per-second" \c
\&\|, and DIAL
.IR "phone-number"
if you are dialing; SET LINE and SPEED for direct connections;
SET NETWORK
.IR "network-type"
and SET HOST
.IR "host-name-or-address"
for network connections.
.sp
.ti -0.2i
\(bu    SET any other necessary communication parameters, such as PARITY,
DUPLEX, and FLOW-CONTROL.
.sp
.ti -0.2i
\(bu    Give the CONNECT command.
.sp
.ti -0.2i
\(bu    Log in to the remote computer.
.sp
.ti -0.2i
\(bu    Start Kermit on the remote computer, give it any desired SET commands
for file-, communication-, or protocol-related parameters.  If you will be
transferring binary files, give the command SET FILE TYPE BINARY to the
Kermit program that will be sending them.
.sp
.ti -0.2i
\(bu    To
.IR download
a file or file group, give the remote Kermit a SEND command, following by
a filename or "wildcard" file specification, for example:
.nf
.sp
  send oofa.txt            (send one file)
.sp
.fi
or:
.nf
.sp
  send oofa.*              (send a group of files)
.sp
.fi
To
.IR upload
a file or files, give the remote Kermit a RECEIVE command.  The sending Kermit
will tell the receiving Kermit the name (and other attributes) of each file.
.sp
.ti -0.2i
\(bu    Escape back to the Kermit program on your local (desktop) computer.  If
your local computer is running C-Kermit, type Ctrl-\\ c (Control-backslash
followed by the letter 'c') (on NeXT workstations, use Ctrl-] c).  If MS-DOS
or OS/2 or Windows Kermit, use Alt-x (hold down the Alt key, press 'x').  Now
you should see your local Kermit program's prompt.
.sp
.ti -0.2i
\(bu    If you will be transferring binary files, give the command SET FILE
TYPE BINARY to the Kermit program that is sending the files.
.sp
.ti -0.2i
\(bu    If you are
.IR downloading
files, tell the local Kermit program to RECEIVE.  If you are
.IR "uploading",
give your local Kermit program a SEND command, specifying a filename
or wildcard file specification.  In other words, tell the
.IR remote
Kermit program what to do first, SEND or RECEIVE, then escape back to
the
.IR local
Kermit and give it the opposite command, RECEIVE or SEND.
.sp
.ti -0.2i
\(bu When the transfer is complete, give a CONNECT command.  Now you are
talking to Kermit on the remote computer again.  Type EXIT to get back to the
command prompt on the remote computer.  When you are finished using the remote
computer, log out and then (if necessary) escape back to Kermit on your local
computer.  Then you can make another connection or EXIT from the local Kermit
program.
.ll +0.5i
.in -0.5i
.fi
.PP
C-Kermit's file transfer protocol defaults are deliberately conservative,
resulting in file transfer that almost always works, but might be somewhat
slow.  To increase file transfer performance on computers and connections that
permit it, use SET RECEIVE PACKET-LENGTH to increase the packet length, SET
WINDOW to increase the packet window size, and use SET PREFIXING to reduce the
overhead of control-character prefixing.  (Hint: try the
.IR FAST
command to enable all these performance options at once.)  On serial
connections, use hardware flow control (SET FLOW RTS/CTS) if available, rather
than software (XON/XOFF) flow control.  On TCP/IP connections, SET FLOW NONE.
For details, including benchmarks, read Chapter 12 of
.IR "Using C-Kermit".
.SH OTHER FEATURES
C-Kermit includes features too numerous to be explained in a man page.  For
further information about connection establishment, modem dialing, networks,
terminal connection, key mapping, logging, file transfer options and features,
troubleshooting, client/server operation, character-set translation during
terminal connection and file transfer, "raw" up- and downloading of files,
macro construction, script programming, convenience features, and shortcuts,
plus numerous tables, examples, and illustrations, please consult
.IR "Using C-Kermit".
.SH HELP
.PP
C-Kermit has extensive built-in help.  You can find out what commands exist by
typing ? at the C-Kermit> prompt.  You can type HELP at the C-Kermit> prompt
for "getting-started" message, or HELP followed by the name
of a particular command for information about that command, for example:
.nf
.sp
  help send
.sp
.fi
or:
.nf
.sp
  help set file
.sp
.fi
You can type ? anywhere within a command to get brief help about the
current command field.  You can also type the INTRO command to get a brief
introduction to C-Kermit, and the NEWS command to find out what's new in
your version.  Finally, you can use the BUG command to learn how to report
bugs.
.sp
.SH "ENTERING COMMANDS"
.sp
You can use upper or lower case for interactive-mode commands, but remember
that UNIX filenames are case-sensitive.  You can abbreviate commands as long
as the abbreviation matches only one possibility.  While typing a command, you
can use the following editing characters:
.nf
.sp
  Delete, Backspace, or Rubout erases the rightmost character.
  Ctrl-W erases the rightmost "word".
  Ctrl-U erases the current command line.
  Ctrl-R redisplays the current command.
  Ctrl-P recalls a previous command (scrolls back in command buffer).
  Ctrl-N scrolls forward in a scrolled-back command buffer.
  Ctrl-C cancels the current command.
  Tab, Esc, or Ctrl-I tries to complete the current keyword or filename.
  ? gives help about the current field.
.sp
.fi
To enter the command and make it execute, press the Return or Enter key.
.sp
.SH BACKSLASH NOTATION
Within an interactive command, the "\\" character (backslash) is a prefix used
to enter special quantities, including ordinary characters that would
otherwise be illegal.  At the end of a line, \\ or - (dash) makes the next
line a continuation of the current line.  Other than that, the character
following the \\ identifies what the special quantity is:
.nf
.sp
  % A user-defined simple (scalar) variable such as \\%a or \\%1
  & an array reference such as \\&a[3]
  $ an environment variable such as \\$(TERM)
  v (or V) a built-in variable such as \\v(time)
  f (or F) a function such as \\Fsubstring(\\%a,3,2)
  d (or D) a decimal (base 10) number (1 to 3 digits, 0..255) such as \\d27
  o (or O) an octal (base 8) number (1 to 3 digits, 0..377) such as \\o33
  x (or X) a hexadecimal (base 16) number (2 digits, 00..ff) like \\x1b
  \\ the backslash character itself
  b (or B) the BREAK signal (OUTPUT command only)
  l (or L) a Long BREAK signal (OUTPUT only)
  n (or n) a NUL (0) character (OUTPUT only)
  a decimal digit (a 1-, 2-, or 3-digit decimal number) such as \\27
  {} used for grouping, e.g. \\{27}123
  anything else: following character taken literally.
.sp
.fi
Note that numbers turn into the character with that binary code (0-255), so
you can use \\7 for a bell, \\13 for carriage return, \\10 for linefeed.
For example, to have C-Kermit send a BELL to your screen, type:
.nf
.sp
  echo \\7
.sp
.fi
.SH "COMMAND LIST"
.PP
The commands most commonly used, and important for beginners to
know, are marked with "*":
.nf
.in 0
.ll 80
.ta 16
.sp
Program Management:
  BUG    Learn how to report bugs.
  CHECK    See if a particular feature is configured.
  CLOSE    Close a log or other local file.
  COMMENT    Introduce a full-line comment.
  DATE    Display current date & time.
* EXIT    Leave the program, return to UNIX.
* HELP    Display a help message for a given command.
* INTRO    Print a brief introduction to C-Kermit.
  LOG    Open a log file -- debugging, packet, session, transaction.
  PUSH    Invoke local system's interactive command interpreter.
  QUIT    Synonym for EXIT.
  REDIRECT    Redirect standard i/o of command to communication device.
  RUN    Run a program or system command.
  SET COMMAND    Command-related parameters: bytesize, recall buffer size.
  SET DEBUG    Log or display debugging information.
  SET EXIT    Items related to C-Kermit's action upon exit or SET LINE/HOST.
  SET PROMPT    The C-Kermit program's interactive command prompt.
  SHOW EXIT    Display SET EXIT parameters.
  SHOW FEATURES    Show features that C-Kermit was built with.
  SHOW VERSIONS    Show version numbers of each source module.
  SUSPEND    Suspend Kermit (use only if shell supports job control!).
* SHOW    Display values of SET parameters.
* TAKE    Execute commands from a file.
  VERSION    Display the C-Kermit program version number.
  Z    Synonym for SUSPEND.
  Ctrl-C    Interrupt a C-Kermit command in progress.
  Ctrl-Z    Synonym for SUSPEND.
  ; or #    Introduce a full-line or trailing comment.
  ! or @    Synonym for RUN.
  <    Synonym for REDIRECT.
.sp
Connection Establishment and Release:
* DIAL    Dial a telephone number.
* HANGUP    Hang up the phone or network connection.
  PAD    Command for X.25 PAD (SunOS / Solaris / VOS only).
  PING    Check status of remote TCP/IP host.
  REDIAL    The the most recently DIALed number again.
  SET CARRIER    Treatment of carrier on terminal connections.
* SET DIAL    Parameters related to modem dialing.
* SET FLOW    Communication line flow control: AUTO, RTS/CTS, XON/XOFF, etc.
* SET HOST    Specify remote network host name or address.
#ifdef HPUX10
* SET LINE    Specify serial communication device name, like /dev/cul0p0.
#else
* SET LINE    Specify serial communication device name, like /dev/cua.
#endif
* SET MODEM TYPE    Specify type of modem on SET LINE device, like HAYES.
* SET NETWORK    Network type, TCP/IP or X.25 (SunOS / Solaris / VOS only).
  SET TCP    Specify TCP protocol options (advanced).
  SET TELNET    Specify TELNET protocol options.
  SET PAD    X.25 X.3 PAD parameters (SunOS / Solaris / VOS only).
* SET PARITY    Character parity (none, even, etc) for communications.
* SET SPEED    Serial communication device speed, e.g. 2400, 9600, 57600.
  SET X.25    Specify X.25 connection parameters (SunOS/Solaris/VOS only).
  SHOW COMM    Display all communications settings.
  SHOW DIAL    Display SET DIAL values.
  SHOW MODEM    Display modem type, signals, etc.
  SHOW NETWORK    Display network-related items.
* TELNET    = SET NETWORK TCP/IP, SET HOST ..., CONNECT.
  TELOPT    Send a TELNET option negotiation (advanced).
.sp
Terminal Connection:
* C    Special abbreviation for CONNECT.
* CONNECT    Establish a terminal connection to a remote computer.
  SET COMMAND    Bytesize between C-Kermit and your keyboard and screen.
* SET DUPLEX    Specify which side echoes during CONNECT.
  SET ESCAPE    Prefix for "escape commands" during CONNECT.
  SET KEY    Key mapping and macros for use in CONNECT mode.
  SET TERMINAL    Terminal connection items: bytesize, character-set, echo, etc.
  SHOW ESCAPE    Display current CONNECT-mode escape character.
  SHOW KEY    Display keycode and assigned value or macro.
  SHOW TERMINAL    Display SET TERMINAL items.
* Ctrl-\\    CONNECT-mode escape character, follow by another character:
      C to return to C-Kermit> prompt.
      B to send BREAK signal.
      ? to see other options.
.sp
File Transfer:
  ADD    Add a file specification to the SEND-LIST
  LOG SESSION   Download a file with no error checking.
  MOVE    Send a file and then delete it
  MMOVE    Multiple MOVE - accepts a list of files, separated by spaces.
  MSEND    Multiple SEND - accepts a list of files, separated by spaces.
* RECEIVE    Passively wait for files to arrive from other Kermit.
* R    Special abbreviation for RECEIVE.
* SEND    Send files.
* S    Special abbreviation for SEND.
  REGET    Continue a incomplete download from a server.
  RESEND    Continue a incomplete upload.
  PSEND    Send part of a file.
  SET ATTRIB    Control transmission of file attributes.
* SET BLOCK    Choose error-checking level, 1, 2, or 3.
  SET BUFFERS    Size of send and receive packet buffers.
  SET PREFIX    Which control characters to "unprefix" during file transfer.
  SET DELAY    How long to wait before sending first packet.
  SET DESTINATION    DISK, PRINTER, or SCREEN for incoming files.
* SET FILE    Transfer mode (type), character-set, collision action, etc.
* SET RECEIVE    Parameters for inbound packets: packet-length, etc.
  SET REPEAT    Repeat-count compression parameters.
  SET RETRY    Packet retransmission limit.
  SET SEND    Parameters for outbound packets: length, etc.
  SET HANDSHAKE    Communication line half-duplex packet turnaround character.
  SET LANGUAGE    Enable language-specific character-set translations.
  SET SESSION-LOG    File type for session log, text or binary.
  SET TRANSFER    File transfer parameters: character-set, display, etc.
  SET TRANSMIT    Control aspects of TRANSMIT command execution.
  SET UNKNOWN    Specify handling of unknown character sets.
* SET WINDOW    File transfer packet window size, 1-31.
  SHOW ATTRIB    Display SET ATTRIBUTE values.
  SHOW CONTROL    Display control-character prefixing map.
* SHOW FILE    Display file-related settings.
  SHOW PROTOCOL    Display protocol-related settings.
  SHOW LANGUAGE    Display language-related settings.
  SHOW TRANSMIT    Display SET TRANSMIT values.
* STATISTICS    Display statistics about most recent file transfer.
  TRANSMIT    Upload a file with no error checking.
  XMIT    Synonym for TRANSMIT.
.sp
File Management:
* CD    Change Directory.
* DELETE    Delete a file or files.
* DIRECTORY    Display a directory listing.
  MAIL    Send a file to other Kermit, to be delivered as e-mail.
  PRINT    Print a local file on a local printer.
* PWD    Display current working directory.
  RENAME    Change the name of a local file.
  SET PRINTER    Choose printer device.
  SPACE    Display current disk space usage.
  SHOW CHARACTER-SETS    Display character-set translation info.
  TRANSLATE    Translate a local file's character set.
  TYPE    Display a file on the screen.
  XLATE    Synonym for TRANSLATE.
.sp
Client/Server operation:
  BYE    Terminate a remote Kermit server and log out its job.
  DISABLE    Disallow access to selected features during server operation:
  E-PACKET    Send an Error packet.
  ENABLE    Allow access to selected features during server operation.
  FINISH    Instruct a remote Kermit server to exit, but not log out.
  G    Special abbreviation for GET.
  GET    Get files from a remote Kermit server.
  RETRIEVE    Like GET but server deletes files after.
  REMOTE xxx    Command for server, can be redirected with > or |.
  REMOTE CD    Tell remote Kermit server to change its directory.
  REMOTE ASSIGN    Assign a variable
  REMOTE DELETE    Tell server to delete a file.
  REMOTE DIRECTORY    Ask server for a directory listing.
  REMOTE HELP    Ask server to send a help message.
  REMOTE HOST    Ask server to ask its host to execute a command.
  REMOTE KERMIT    Send an interactive Kermit command to the server.
  REMOTE LOGIN    Authenticate yourself to a remote Kermit server.
  REMOTE LOGOUT    Log out from a Kermit server previously LOGIN'd to.
  REMOTE PRINT    Print a local file on the server's printer.
  REMOTE QUERY    Get value of a variable.
  REMOTE SET    Send a SET command to a remote server.
  REMOTE SPACE    Ask server how much disk space it has left.
  REMOTE TYPE    Ask server to display a file on your screen.
  REMOTE WHO    Ask server for a "who" or "finger" listing.
  SERVER    Be a Kermit server.
  SET SERVER    Parameters for server operation.
  SHOW SERVER    Show SET SERVER, ENABLE/DISABLE items.
.sp
Script programming:
  ASK    Prompt the user, store user's reply in a variable.
  ASKQ    Like ASK, but, but doesn't echo (useful for passwords).
  ASSIGN    Assign an evaluated string to a variable or macro.
  CLEAR    Clear communication device input buffer.
  CLOSE    Close a log or other local file.
  DECLARE    Declare an array.
  DECREMENT    Subtract one (or other number) from a variable.
  DEFINE    Define a variable or macro.
  DO    Execute a macro ("DO" can be omitted).
  ECHO    Display text on the screen.
  ELSE    Used with IF.
  END    A command file or macro.
  EVALUATE    an arithmetic expression.
  FOR    Execute commands repeatedly in a counted loop.
  FORWARD    GOTO in the forward direction only.
  GETC    Issue a prompt, get one character from keyboard.
  GETOK    Ask question, get Yes or No answer, set SUCCESS or FAILURE.
  GOTO    Go to a labeled command in a command file or macro.
  IF    Conditionally execute the following command.
  INCREMENT    Add one (or other number) to a variable.
  INPUT    Match characters from another computer against a given text.
  LOCAL    Declares local variables in a macro
  MINPUT    Like INPUT, but allows several match strings.
  MSLEEP    Sleep for given number of milliseconds.
  OPEN    Open a local file for reading or writing.
  O    Special abbreviation for OUTPUT.
  OUTPUT    Send text to another computer.
  PAUSE    Do nothing for a given number of seconds.
  READ    Read a line from a local file into a variable.
  REINPUT    Reexamine text previously received from another computer.
  RETURN    Return from a user-defined function.
  SCRIPT    Execute a UUCP-style login script.
  SET ALARM    Set a timer to be used with IF ALARM; SHOW ALARM shows it.
  SET CASE    Treatment of alphabetic case in string comparisons.
  SET COMMAND    QUOTING turns on/off interpretation of backslash notation.
  SET COUNT    For counted loops.
  SET INPUT    Control behavior of INPUT command.
  SET MACRO    Control aspects of macro execution.
  SET TAKE    Control aspects of TAKE file execution.
  SHOW ARGUMENTS    Display arguments to current macro.
  SHOW ARRAYS    Display information about active arrays.
  SHOW COUNT    Display current COUNT value.
  SHOW FUNCTIONS    List names of available \\f() functions.
  SHOW GLOBALS    List defined global variables \\%a..\\%z.
  SHOW MACROS    List one or more macro definitions.
  SHOW SCRIPTS    Show script-related settings.
  SHOW VARIABLES    Display values all \\v() variables.
  SLEEP    Sleep for given number of seconds.
  STOP    Stop executing macro or command file, return to prompt.
  UNDEFINE    Undefine a variable
  WAIT    Wait for the specified modem signals.
  WHILE    Execute commands repeatedly while a condition is true.
  WRITE    Write material to a local file.
  WRITE-LINE    Write a line (record) to a local file.
  WRITELN    Synonym for WRITE-LINE.
  XECHO    Like ECHO but no CRLF at end.
  XIF    Extended IF command.
.ll
.in
.fi
.SH "BUILT-IN VARIABLES"
Built-in variables are referred to by \\v(name), can be used in any command,
usually used in script programming.  They cannot be changed.  Type SHOW
VARIABLES for a current list.
.nf
.sp
  \\v(argc)      number of arguments in current macro
  \\v(args)      number of program command-line arguments
  \\v(charset)     current file character-set
  \\v(cmdfile)   name of current command file, if any
  \\v(cmdlevel)  current command level
  \\v(cmdsource) where command are currently coming from, macro, file, etc.
  \\v(cols)      number of screen columns
  \\v(connection)connection type: serial, tcp/ip, etc.
  \\v(count)     current COUNT value
  \\v(cps)       speed of most recent file transfer in chars per second
  \\v(cpu)       CPU type C-Kermit was built for
  \\v(crc16)     16-bit CRC of most recent file transfer
  \\v(d$ac)      SET DIAL AREA-CODE value
  \\v(d$cc)      SET DIAL COUNTRY-CODE value
  \\v(d$ip)      SET DIAL INTL-PREFIX value
  \\v(d$lc)      SET DIAL LD-PREFIX value
  \\v(date)      date as 8 Feb 1993
  \\v(day)       day of week
  \\v(directory) current/default directory
  \\v(dialstatus)return code from DIAL command (0 = OK, 22 = BUSY, etc)
  \\v(download)  current download directory if any
  \\v(errno)     current "errno" (system error number) value
  \\v(errstring) error message string associated with errno
  \\v(evaluate)  result of most recent EVALUATE command
  \\v(exitstatus)current EXIT status (0 = good, nonzero = something failed)
  \\v(filespec)  filespec given in most recent SEND/RECEIVE/GET command
  \\v(fsize)     size of file most recently transferred
  \\v(ftype)     SET FILE TYPE value (text, binary)
  \\v(home)      home directory
  \\v(host)      computer host name (comuter where C-Kermit is running)
  \\v(input)     current INPUT buffer contents
  \\v(inchar)    character most recently INPUT
  \\v(incount)   how many characters arrived during last INPUT
  \\v(inidir)    directory where initialization file was found
  \\v(instatus)  status of most recent INPUT command
  \\v(line)      current communications device, set by LINE or HOST
  \\v(local)     0 if in remote mode, 1 if in local mode
  \\v(macro)     name of currently executing macro, if any
  \\v(minput)    Result of most recent MINPUT command
  \\v(modem)     Current modem type
  \\v(m_aa_off)  Modem command to turn autoanswer off
  \\v(m_aa_on)   Modem command to turn autoanswer on
  \\v(m_dc_off)  Modem command to turn data compression off
  \\v(m_dc_on)   Modem command to turn data compression on
  \\v(m_dial)    Telephone number most recently dialed
  \\v(m_ec_off)  Modem command to turn error correction off
  \\v(m_ec_on)   Modem command to turn error correction on
  \\v(m_fc_hw)   Modem command to turn hardware flow control on
  \\v(m_fc_no)   Modem command to turn flow control off
  \\v(m_fc_sw)   Modem command to turn software flow control on
  \\v(m_hup)     Modem command to hang up connection
  \\v(m_init)    Modem initialization string
  \\v(m_pulse)   Modem command to select pulse dialing
  \\v(m_tone)    Modem command to select tone dialing
  \\v(ndate)     Current date as 19930208 (yyyymmdd)
  \\v(nday)      Numeric day of week (0 = Sunday)
  \\v(newline)   System-independent newline character or sequence
  \\v(ntime)     Current local time in seconds since midnight (noon = 43200)
  \\v(packetlen) Current SET RECEIVE PACKET-LENGTH value
  \\v(parity)    Current parity setting
  \\v(platform)  Specific machine and/or operating system
  \\v(program)   Name of this program ("C-Kermit")
  \\v(query)     Result of most recent REMOTE QUERY command
  \\v(protocol)  Currently selected file transfer protocol
  \\v(return)    Most recent RETURN value
  \\v(rows)      Number of rows on the terminal screen
  \\v(speed)     Current speed, if known, or "unknown"
  \\v(status)    0 or 1 (SUCCESS or FAILURE of previous command)
  \\v(sysid)     Kermit attribute code for system ID
  \\v(system)    UNIX
  \\v(terminal)  Terminal type
  \\v(tfsize)    Total size of file group most recently transferred
  \\v(time)      Time as 13:45:23 (hh:mm:ss)
  \\v(tmpdir)    Temporary directory
  \\v(ttyfd)     File descriptor of current communication device
  \\v(version)   Numeric version of Kermit, e.g. 501190.
  \\v(window)    Current window size (SET WINDOW value)
.fi
.SH "BUILT-IN FUNCTIONS"
Builtin functions are invoked as \\Fname(args), can be used in any command,
and are usually used in script programs.  Type SHOW FUNCTIONS for a current
list.
.nf
.sp
   \\Fbasename(file)    basename of file
   \\Fbreak(s,c)        left substring of s up to 1st occurence of char c
   \\Fcapitalize(s)     uppercase first letter of s and lowercase the rest
   \\Fcharacter(arg)    convert numeric arg to character
   \\Fchecksum(s)       32-bit arithmetic checksum of string s
   \\Fcode(char)        numeric code for character
   \\Fcontents(v)       return current definition of variable
   \\Fcrc16(s)          16-bit CRC of string s
   \\Fdate(filename)    return file's modification date/time
   \\Fdefinition(m)     return current definition of macro
   \\Feval(expr)        evaluate arithmetic expression
   \\Fexecute(m,a,b,..) execute macro "m" with arguments "a", "b", etc
   \\Ffiles(f)          number of files matching file spec
   \\Fhexify(s)         translate s into a hexadecimal string
   \\Findex(a1,a2,a3)   position of string a1 in a2, starting at pos a3
   \\Fipaddress(s)      returns first IP address from string s
   \\Flength(arg)       length of the string "arg"
   \\Fliteral(arg)      copy argument literally, no evaluation
   \\Flower(arg)        convert to lower case
   \\Flpad(text,n,c)    left pad text to length n with char c
   \\Fltrim(s)          Trim whitespace from left of s
   \\Fmax(a1,a2)        max of two numbers
   \\Fmin(a1,a2)        min of two numbers
   \\Fmodulus(n1,n2)    modulus n2 of integer n1
   \\Fnextfile()        next file name from list in last \\Ffiles()
   \\Fpathname(file)    full pathname of file
   \\Frepeat(a1,a2)     repeat a1 a2 times
   \\Freplace(a1,a2,a3) replace a2 by a3 in a1
   \\Freverse(arg)      reverse characters in arg
   \\Fright(a1,a2)      rightmost a2 characters of string a1
   \\Frindex(a1,a2,a3)  like \\Findex, but searching from right
   \\Frpad(text,n,c)    right pad text to length n with char c
   \\Fsize(filename)    return file's length in bytes
   \\Fspan(a1,a2)       left substring of a1 containing only chars from a2
   \\Fsubstr(a1,a2,a3)  substring of a1, starts at a2, length a3
   \\Ftod2secs(s)       converts hh:mm:ss to seconds since midnight
   \\Ftrim(s)           removes trailing whitespace from s
   \\Funhexify(s)       converts a hexacimal string s back to original
   \\Fupper(s)          converts s to upper case
   \\Fverify(a1,a2,n)   returns index of 1st char in a2 that is not in a1
                        starting at position n of a2.
.sp
.fi
\\Feval() allows the following operators in the expression.  The expression
can contain variables.  Only integer arithmetic is supported.
Precedences are shown as numbers, 1 is highest
precedence, 6 is lowest.
.in +.2i
.nf
.ta \w'n @ n  'u +\w'5   'u
.sp
( )    1    parentheses
n !    2    factorial
~ n    3    logical NOT
- n    4    negative
n ^ n    4    power
n * n    5    multiplication
n / n    5    division
n % n    5    modulus
n & n    5    logical AND
n + n    6    plus
n - n    6    minus
n | n    6    logical OR
n # n    6    exclusive OR
n @ n    6    greatest common divisor
.sp
.fi
.SH "COMMAND LINE OPTIONS"
.PP
C-Kermit accepts commands (or "options") on the command line, in the
time-honored UNIX style.  Alphabetic case is significant.  All options
are optional.  If one or more action options are included, Kermit exits
immediately after executing the command-line options, otherwise it enters
interactive command mode.
.nf
.ll 80
.sp
  kermit [filename] [-x arg [-x arg]...[-yyy]..]]
.sp
where:
.sp
  filename is the name of a command file to execute,
  -x is an option requiring an argument,
  -y an option with no argument.
.ta 15
.sp
Actions:
  -s files    send files
  -s -    send files from stdin
  -r    receive files
  -k    receive files to stdout
  -x    enter server mode
  -f    finish remote server
  -g files    get remote files from server (quote wildcards)
  -a name    alternate file name, used with -s, -r, -g
  -c    connect (before file transfer), used with -l or -j
  -n    connect (after file transfer), used with -l or -j
.sp
Settings:
  -l line    communication line device (to make a serial connection)
  -l n    open file descriptor of communication device
  -j host    TCP/IP network host name (to make a network connection)
  -J host    Connect like TELNET, exit when connection closes
  -l n    open file descriptor of TCP/IP connection (n = number)
  -X    X.25 network address
  -Z    open file descriptor of X.25 connection
  -o n    X.25 closed user group call info
  -u    X.25 reverse-charge call
  -q    quiet during file transfer
  -8    8-bit clean
  -i    transfer files in binary mode
  -T    transfer files in text mode
  -b bps    serial line speed, e.g. 1200
  -m name    modem type, e.g. hayes
  -p x    parity, x = e,o,m,s, or n
  -t    half duplex, xon handshake
  -e n    receive packet-length
  -v n    window size
  -Q    Quick file-transfer settings
  -w    write over files of same name, don't backup old file
  -D n    delay n seconds before sending a file
.sp
Other:
  -y name    alternate init file name
  -Y    Skip init file
  -R    Advise C-Kermit it will be used only in remote mode
  -d    log debug info to file debug.log
  -S    Stay, don't exit, after action command
  -C "cmds"    Interactive-mode commands, comma-separated
  -z    Force foreground operation
  -B    Force background (batch) operation
  -h    print command-line option help screen
  =    Ignore all text that follows
.sp
Remote-mode example (C-Kermit is on the far end):
.nf
.sp
  kermit -v 4 -i -s oofa.bin
.sp
.fi
sends file oofa.bin in binary mode (-i) using a window size of 4 (-v 4).
.sp
Local-mode example (C-Kermit makes the connection):
.nf
.sp
  kermit -l HARDWIRE -b 19200 -c -r -n
.sp
.fi
makes a 19200-bps direct connection out through HARDWIRE, CONNECTs (-c) so you
can log in and, presumably start a remote Kermit program and tell it to send a
file, then it RECEIVEs the file (-r), then it CONNECTs back (-n) so you can
finish up and log out.
.sp
For dialing out, you must specify a modem type, and you might have to use a
different device name:
.nf
.sp
  kermit -m hayes -l DIALOUT -b 2400 -c -r -n
.ll
.in
.fi
.SH FILES
.nf
.ta 16
#ifndef HPUX10
$HOME/.kermrc    Standard C-Kermit initialization commands.
#endif /* HPUX10 */
$HOME/.mykermrc    Your personal C-Kermit customization file.
$HOME/.kdd    Your personal dialing directory.
$HOME/.ksd    Your personal services directory.
#ifdef HPUX10
.sp
/usr/share/lib/kermit/READ.ME      Overview of HP-UX C-Kermit, please read
/usr/share/lib/kermit/ckermit.ini  System-wide initialization file
/usr/share/lib/kermit/ckermod.ini  Sample customization file
/usr/share/lib/kermit/ckermit.kdd  Sample dialing directory
/usr/share/lib/kermit/ckermit.ksd  Sample services directory
/usr/share/lib/kermit/ckermit.upd  Supplement to "Using C-Kermit"
/usr/share/lib/kermit/ckermit.bwr  C-Kermit "beware" file - hints & tips
/usr/share/lib/kermit/ckuker.bwr   UNIX-specific beware file
/usr/share/lib/kermit/ckedemo.ksc  Macros from "Using C-Kermit"
/usr/share/lib/kermit/ckevt.ksc    Ditto
/usr/share/lib/kermit/ckepage.ksc  Alpha pager script
/var/spool/locks/LCK..*            UUCP lockfiles
#else
.fi
.PP
The following should be in a publicly accessible plain-text documentation area,
such as usr/local/lib/kermit, /usr/local/doc, or /usr/share/lib/kermit, or
available via an information server such as gopher, or by ftp from Columbia:
.nf
.ta 16
.sp
ckaaaa.hlp      Explanation of C-Kermit files.
ckermit.ini     Standard initialization file.
ckermod.ini    Sample C-Kermit customization file.
ckermit.kdd    Sample dialing directory.
ckermit.ksd    Sample services directory.
ckermit.upd    Supplement to "Using C-Kermit".
ckcker.bwr    C-Kermit "beware" file - hints & tips.
ckuker.bwr    UNIX-specific beware file.
ckedemo.ini     Demonstration macros from "Using C-Kermit".
ckevt.ini       Ditto.
ckepager.ksc    Alpha pager script.
#endif
.fi
.PP
#ifndef HPUX10
If C-Kermit has not been installed on your system with the system-wide
initialization file feature, then the ckermit.ini file should be copied to
your home (login) directory and renamed to
.IR ".kermrc" .
You should not modify
this file.
.sp
#endif
To make
.IR "personalized customizations" ,
copy the file
#ifdef HPUX10
/usr/share/lib/kermit/ckermod.ini
#else
ckermod.ini
#endif
file to your home directory, make any desired changes, and rename it to
.IR ".mykermrc" .
.sp
You may also create a personalized
.IR "dialing directory"
like the sample one in
#ifdef HPUX10
/usr/share/lib/kermit/ckermit.kdd.
#else
ckermit.kdd.
#endif
Your personalized dialing directory
should be stored in your home directory as
.IR ".kdd"
and your personal network directory as
.IR ".knd" .
See Chapters 5 and 6 of
.IR "Using C-Kermit"
for details.
.sp
And you may also create a personalized
.IR "services directory"
like the sample one in
#ifdef HPUX10
/usr/share/lib/kermit/ckermit.ksd.
#else
ckermit.ksd.
#endif
Your personalized services directory should be stored in your home directory as
.IR ".ksd" .
See Chapter 7 of
.I "Using C-Kermit"
for instructions.
.sp
The demonstration files illustrate C-Kermit's script programming constructs;
they are discussed in chapters 17-19 of the book.  You can run them by typing
the appropriate TAKE command at the C-Kermit> prompt, for example:
"take /usr/share/lib/kermit/ckedemo.ini".
.PD
.SH AUTHORS
Frank da Cruz, Columbia University, with contributions from hundreds of
other volunteer programmers all over the world.  See Acknowledgements in
.IR "Using C-Kermit".
.SH REFERENCES
.TP
Frank da Cruz and Christine M. Gianone,
.IR "Using C-Kermit",
Second Edition, 1997, 622 pages,
Digital Press / Butterworth-Heinemann, 225 Wildwood Street,
Woburn, MA 01801, USA.
ISBN 1-55558-164-1.  (In the USA, call [phone] to order Digital Press
books.)  Also available in a German edition from Verlag Heinze Heise,
Hannover.
.sp
.TP
Frank da Cruz,
.IR "Kermit, A File Transfer Protocol",
Digital Press / Butterworth-Heinemann, Woburn, MA, USA (1987).
ISBN 0-932376-88-6.  The Kermit file transfer protocol specification.
.TP
Christine M. Gianone,
.IR "Using MS-DOS Kermit",
Digital Press / Butterworth-Heinemann, Woburn, MA, USA (1992).
ISBN 1-5558-082-3.  Also available in a German edition from Heise, and a
French edition from Heinz Schiefer & Cie, Versailles.
.TP
.IR "Kermit News",
Issues 4 (1990) and 5 (1993), Columbia University,
for detailed discussions of Kermit file transfer performance.
.SH DIAGNOSTICS
The diagnostics produced by
.I C-Kermit
itself are intended to be self-explanatory.  In addition, every command
returns a SUCCESS or FAILURE status that can be tested by IF FAILURE or
IF SUCCESS.  In addition, the program itself returns an exit status code of
0 upon successful operation or nonzero if any of various operations failed.
.SH BUGS
See the comp.protocols.kermit.* newsgroups on Usenet for discussion, or the
files ckcker.bwr and ckuker.bwr, for a list of bugs, hints, tips. etc.  Report
bugs via e-mail to [e-mail].
.SH CONTACTS
For more information about Kermit software and documentation, visit the
Kermit Web site:
.nf
.sp
  http://www.columbia.edu/kermit/
.sp
.fi
Or write to:
.nf
.sp
  The Kermit Project
  Columbia University
  612 West 115th Street
  New York NY  10025-7799
  USA
.sp
.fi
Or send e-mail to [e-mail].
Or call [phone].  Or fax [phone].
.br