Columbia Kermit/kermit.zip/cpm80/cpkerm.bw2

Text File | 2020-01-01 | 5KB | 132 lines

Re:  Problems with CP/M Kermit Version 4.09

Following is a list of problems and their solutions for CP/M Kermit
Version 4.09.  Bear in mind that the latest version of CPSPK1.ASM I have is
edit (11) and of CPSPK2.ASM is edit (4).

Problem:  When the terminal is in "quiet" mode, initiation of file-transfers
    causes lots of garbage to appear on the screen which is distracting
    and which raises havoc with voice output devices.
Diagnosis:  In the module CPXCOM.ASM, the routine "prtstr" has two flavors:
    one for machines which cannot display control-characters via BDOS
    function 9 and one which can display such characters via function 9.
    In this latter case, only register pair BC is saved around the BDOS
    call.  This is insufficient as BDOS also clobbers register pairs
    DE and HL during the call.  In "quiet" mode, at least one of these
    pairs is expected to remain constant.
Solution:  Save register pairs DE and HL around the function 9 BDOS call.

Problem:  When GETting a file, the initialization routine "init" is executed
    twice.  This doesn't harm anything and may not be noticeeable in
    print but is most annoying when using voice output as "init" types
    out the Kermit version and screen initialization strings and thus
    one hears them twice.
Solution:  In the module CPSPK1.ASM, move the label "read0a" down one line
    so that the common code for the "receive" and "get" commands starts
    just *after* the call to "init" is made in "receive" mode.

Problem:  With "auto-receive" set to "off", after a RECEIVE has completed,
    Kermit waits for Console input; then looks for more data to receive
    when there is none.
Diagnosis:  In the module CPSPK1.ASM, when the status of "auto-receive" is
    checked, the wrong label is branched to if "auto-receive" is OFF.
Solution:  Change the instruction "jz read5c" to "jz read5b".

Problem:  Files whose filenames are less then 8 characters in length have
    ASCII zeros ("0") appended to them.
Diagnosis:  In the module CPSPK2.ASM, after label "gofi7b", where the status
    of "file-warning" is checked, the code for the appending of "&"
    characters to filenames if the file already exists on disk has been
    commented out and new code putting numeric suffixes on filenames
    in this case has been substituted.  In the process, the code for
    checking for a file's existence has been accidentally commented out.
    Thus, if "file-warning" is "on", *every* file is assumed to have
    a duplicate and a numeric suffix is added to each filename.  In
    addition, no warning of this is given on-screen.
Solution:  (1) Uncomment the code which checks for the existence of each file.
    (2) Uncomment the code which prints the file-warning error message
    and put a "lxi d,fnbuf" instruction between the "stax d" shown in
    CPKERM.BWR and the call to "prtstr" so that routine can print the
    filename of any file whose existence has been detected.


With these changes, Kermit-80 performs like a champ.
Following are file comparisons showing the changes noted above.

************
File DISK$USER:[OGRFJMF.KERMIT.CPM]CPXCOM.ASM;1
  418           push    b
******
File DISK$USER:[OGRFJMF.KERMIT.CPM.HP125]CPXCOM.ASM;1
  418       PUSH    H
  419       PUSH    D
  420           push    b
************
************
File DISK$USER:[OGRFJMF.KERMIT.CPM]CPXCOM.ASM;1
  422           ret             ; all done for good machines
******
File DISK$USER:[OGRFJMF.KERMIT.CPM.HP125]CPXCOM.ASM;1
  424       POP    D
  425       POP    H
  426           ret             ; all done for good machines
************

Number of difference sections found: 2
Number of difference records found: 4

DIFFERENCES /IGNORE=()/MERGED=1/OUTPUT=DISK$USER:[OGRFJMF.KERMIT.CPM.HP125]CPXCOM.DIF;1-
    DISK$USER:[OGRFJMF.KERMIT.CPM]CPXCOM.ASM;1-
    DISK$USER:[OGRFJMF.KERMIT.CPM.HP125]CPXCOM.ASM;1

File 1)    DSKE:CPSPK1.ASM[10,50,KERMIT,CPM]          created: 1940 26-Aug-89
File 2)    DSKE:CPSPK1.ASM[10,50,KERMIT,CPM,HP125]    created: 2247 27-Aug-89

1)1    read0a:    call    init        ;clear line, initialise buffers
1)        lxi    d,remnam    ;[gnn] save local name here
1)        mvi    a,cmtxt        ;[gnn]
****
2)1        call    init        ;clear line, initialise buffers
2)    read0a:    lxi    d,remnam    ;[gnn] save local name here
2)        mvi    a,cmtxt        ;[gnn]
**************
1)2        jz    read5c        ; no autoreceives, so drop out
1)        lxi    d,anymes    ; load up Press any key to continue
****
2)2        jz    read5b        ; no autoreceives, so drop out
2)        lxi    d,anymes    ; load up Press any key to continue
**************

File 1)    DSKE:CPSPK2.ASM[10,50,KERMIT,CPM]          created: 0829 28-Aug-89
File 2)    DSKE:CPSPK2.ASM[10,50,KERMIT,CPM,HP125]    created: 2259 27-Aug-89

1)1    ;    mvi    c,openf        ;See if the file exists.
1)    ;    lxi    d,fcb
1)    ;    call    bdos
1)    ;    cpi    0FFH        ;Does it exist?
1)    ;    jz    gofil9        ;If not create it.
1)    ;    lxi    d,infms5
1)    ;    call    error3
1)    ;    lda    temp2        ;Get the number of chars in the file name.
****
2)1        mvi    c,openf        ;See if the file exists.
2)        lxi    d,fcb
2)        call    bdos
2)        cpi    0FFH        ;Does it exist?
2)        jz    gofil9        ;If not create it.
2)        lxi    d,infms5
2)        call    error3
2)    ;    lda    temp2        ;Get the number of chars in the file name.
**************
1)1        call    prtstr        ; write string to console
****
2)1        lxi    d,fnbuf        ;[MF]Point to string
2)        call    prtstr        ; write string to console
**************


I may be reached on BITNET by E-mail to mailer@uwalocke with the subject-line
containing the phrase <dec10%"bpa">.
-- Mike Freeman; Bonneville Power Administration; Vancouver, Wa;
Telephone [phone] --