home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Columbia Kermit
/
kermit.zip
/
archives
/
mskermit.tar.gz
/
mskermit.tar
/
msvibmzip.uue
/
MSVIBM.ZIP
/
KEYBOARD
/
VT300.INI
< prev
next >
Wrap
Text File
|
1994-11-14
|
9KB
|
230 lines
; VT300.INI - MS-DOS Kermit keyboard setup for DEC VT200-300 series terminals.
; Originally contributed by Kevin Lowey, University of Saskatchewan Computing
; Services. For use only with MS-DOS Kermit 3.10 or later. Adapted for new
; features of version 3.10 at Columbia University. Further modified by Kevin
; Lowey to correct some problems in the original keyboard layouts. etc etc.
;
; Two different setups are provided, one for the 101-key extended PC keyboard,
; one for the 88-key original keyboard. This file (when used with MS-DOS
; Kermit 3.10 or later) automatically determines which kind of keyboard you
; have. See the comments in the file to learn the key assignments.
;
; NOTE: The key assignments made by this file comprise just one of an infinite
; number of possible arrangements. No two people agree about how best to map
; DEC keyboard keys to IBM PC keys. If the mappings done by this file do not
; suit your taste, feel free to make modifications.
;
; Usage: TAKE VT300.INI (specify complete path if necessary).
; Or put this TAKE command in your MSCUSTOM.INI file.
; If you will be emulating a VT220 or VT320 terminal on a DEC VAX computer
; VMS 5.0 or later, and you have an 8-bit (no-parity) connection to it,
; also uncomment or otherwise issue the following command:
;
;;; SET TERMINAL DISPLAY 8
; If you need to use the ISO Latin-1 character set in the 7-bit environment
; with the host sending Shift-In/Shift-Out (Ctrl-N/Ctrl-O) to switch between
; ASCII and special characters, uncomment the following command:
;
;;; set terminal character-set latin1 G1
; Standard VT terminal settings
;
set term tabs at 1:8
; Version test
;
if not < version 310 goto systest
echo VT300.INI requires MS-DOS Kermit Version 3.10 or later.
pop
; System check
;
:systest
if eq "\v(platform)" "IBM-PC" goto kbtest
echo VT300.INI is only for IBM PCs, PS/2s, and compatibles.
pop
; Automatic keyboard test
;
:kbtest
set key on
asg \%9 \v(keyboard)
if eq "\%9" "88" goto kb88
if eq "\%9" "101" goto kb101
if numeric \%9 if > \%9 101 goto kb101
echo Keyboard type "\%9" not supported by VT300.INI.
pop
:kb101
echo VT300.INI: IBM-101 Extended Keyboard Setup...
;
; IBM-101 Extended Keyboard Definitions
; IBM KEY DEC KEY
; Numeric Keypad
; There are two definitions for each of the numeric keypad keys,
; one for when <NUM-LOCK> is pressed, and one when it isn't.
set key \850 \kkp0 ; Keypad 0 (Numlock) Keypad 0
set key \338 \kkp0 ; Keypad 0 (Normal) Keypad 0
set key \847 \kkp1 ; Keypad 1 (Numlock) Keypad 1
set key \335 \kkp1 ; Keypad 1 (Normal) Keypad 1
set key \848 \kkp2 ; Keypad 2 (Numlock) Keypad 2
set key \336 \kkp2 ; Keypad 2 (Normal) Keypad 2
set key \849 \kkp3 ; Keypad 3 (Numlock) Keypad 3
set key \337 \kkp3 ; Keypad 3 (Normal) Keypad 3
set key \843 \kkp4 ; Keypad 4 (Numlock) Keypad 4
set key \331 \kkp4 ; Keypad 4 (Normal) Keypad 4
set key \844 \kkp5 ; Keypad 5 (Numlock) Keypad 5
set key \332 \kkp5 ; Keypad 5 (Normal) Keypad 5
set key \845 \kkp6 ; Keypad 6 (Numlock) Keypad 6
set key \333 \kkp6 ; Keypad 6 (Normal) Keypad 6
set key \839 \kkp7 ; Keypad 7 (Numlock) Keypad 7
set key \327 \kkp7 ; Keypad 7 (Normal) Keypad 7
set key \840 \kkp8 ; Keypad 8 (Numlock) Keypad 8
set key \328 \kkp8 ; Keypad 8 (normal) Keypad 8
set key \841 \kkp9 ; Keypad 9 (Numlock) Keypad 9
set key \329 \kkp9 ; Keypad 9 (Normal) Keypad 9
set key \334 \kkpminus ; Keypad + Keypad -
set key \2382 \kkpcoma ; ALT Keypad + Keypad ,
set key \851 \kkpdot ; Keypad . (Numlock) Keypad .
set key \339 \kkpdot ; Keypad . (normal) Keypad .
set key \4365 \Kkpenter ; Keypad Enter Keypad Enter
; F1 PF1 (default Kermit)
; Use GOLD.COM to make Num Lock work as F1/PF1/Gold.
set key \325 \kPF1 ; This works with WPGGOLD.COM.
set key \4399 \kPF2 ; Keypad / PF2
set key \311 \kPF3 ; Keypad * PF3
set key \330 \kPF4 ; Keypad - PF4 Key
; F1 thru F20 keys IBM DEC
set key \1374 \kholdscrn ; Control-F1 F1
set key \1375 \kprtscn ; Control-F2 F2
set key \1376 \khelp ; Control-F3 Setup
; No Definition ; Control-F4 F4
; Default mapping ; F1 Gold (PF1)
; Default Mapping ; F2 PF2
; Default Mapping ; F3 PF3
; Default Mapping ; F4 PF4
set key \319 \kbreak ; F5 Break
set key \320 \Kdecf6 ; F6 DEC F6
set key \321 \Kdecf7 ; F7 DEC F7
set key \322 \KdecF8 ; F8 DEC F8
set key \323 \KdecF9 ; F9 DEC F9
set key \324 \KdecF10 ; F10 DEC F10
set key \389 \kdechelp ; F11 DEC Help
set key \390 \kdecdo ; F12 DEC Do
set key \2408 \kdecF11 ; Alt-F1 F11
set key \2409 \kdecF12 ; Alt-F2 F12
set key \2410 \kdecF13 ; Alt-F3 F13
set key \2411 \kdecF14 ; Alt-F4 F14
set key \2412 \kdechelp ; Alt-F5 Help (F15)
set key \2413 \kdecdo ; Alt-F6 Do (F16)
set key \2414 \kdecF17 ; Alt-F7 F17
set key \2415 \kdecF18 ; Alt-F8 F18
set key \2416 \kdecF19 ; Alt-F9 F19
set key \2417 \kdecF20 ; Alt-F10 F20
; Cursor Keypad
set key \4434 \kdecinsert ; Gray Insert DEC Insert Here
set key \4435 \kdecRemove ; Gray Delete DEC Remove
set key \4423 \kdecFind ; Gray Home DEC Find
set key \4431 \KdecSelect ; Gray End DEC Select
set key \4425 \KDecPrev ; Gray Page Up DEC Prev Screen
set key \4433 \KDecNext ; Gray Page Down DEC Next Screen
if < version 314 pop ; User Defined Keys (UDKs), new to version 3.14.
; These are available as verbs \KudkF6..F20, but it's up to you to decide
; what keys or key combinations to assign them to.
pop
:kb88
echo VT300.INI: IBM-88 Original Keyboard Setup...
;
; Key Definitions:
;
; The numeric keypad is mapped as follows:
;
; IBM Function VT100 Keys
; Normal Shifted On the Numeric Keypad
; ------------------------- -------------------------
; | F1 | F2 | SF1 | SF2 | | PF1 | PF2 | PF3 | PF4 |
; |-----+-----+-----+-----| |-----+-----+-----+-----|
; | F3 | F4 | SF3 | SF4 | | 7 | 8 | 9 | - |
; |-----+-----+-----+-----| |-----+-----+-----+-----|
; | F5 | F6 | SF5 | SF6 | | 4 | 5 | 6 | , |
; |-----+-----+-----+-----| |-----+-----+-----+-----|
; | F7 | F8 | SF7 | SF8 | | 1 | 2 | 3 | |
; |-----------+-----|-----| |-----------+-----|ENTER|
; | F9 | F10 | SF9 | F10 | | 0 | . | |
; ------------------------- -------------------------
;
; F9 is defined as DEC's Keypad-0 key.
; F10 is defined as DEC's Keypad-Enter key.
; SF9 is defined as DEC's Keypad-DOT key.
;
; The DEC F1 to F10 keys are mapped to the PC's Ctrl-F1 through Ctrl-F10 keys.
; The DEC F11 to F20 keys are mapped to the PC's Alt-F1 to Alt-F10 keys.
;
; Definition PC key DEC key
set key \315 \kpf1 ; F1 PF1
set key \316 \kpF2 ; F2 PF2
set key \317 \kkp7 ; F3 Keypad 7
set key \318 \kkp8 ; F4 Keypad 8
set key \319 \kkp4 ; F5 Keypad 4
set key \320 \kkp5 ; F6 Keypad 5
set key \321 \kkp1 ; F7 Keypad 1
set key \322 \kkp2 ; F8 Keypad 2
set key \323 \kkp0 ; F9 Keypad 0
set key \324 \kkpenter ; F10 Keypad Enter
set key \852 \kpf3 ; Shift-F1 PF3
set key \853 \kpf4 ; Shift-F2 PF4
set key \854 \kkp9 ; Shift-F3 Keypad 9
set key \855 \kkpminus ; Shift-F4 Keypad Minus
set key \856 \kkp6 ; Shift-F5 Keypad 6
set key \857 \kkpcoma ; Shift-F6 Keypad Comma
set key \858 \kkp3 ; Shift-F7 Keypad 3
set key \859 \kkpenter ; Shift-F8 Keypad Enter
set key \860 \kkpdot ; Shift-F9 Keypad Dot
set key \861 \kkpenter ; Shift-F10 Keypad Enter (duplicate)
set key \1374 \kholdscrn ; Control-F1 F1
set key \1375 \kprtscn ; Control-F2 F2
set key \1376 \khelp ; Control-F3 Setup
; No Definition ; Control-F4 F4
set key \1378 \kbreak ; Control-F5 F5
set key \1379 \kdecF6 ; Control-F6 F6
set key \1380 \kdecF7 ; Control-F7 F7
set key \1381 \kdecF8 ; Control-F8 F8
set key \1382 \kdecF9 ; Control-F9 F9
set key \1383 \kdecF10 ; Control-F10 F10
set key \2408 \kdecF11 ; Alt-F1 F11
set key \2409 \kdecF12 ; Alt-F2 F12
set key \2410 \kdecF13 ; Alt-F3 F13
set key \2411 \kdecF14 ; Alt-F4 F14
set key \2412 \kdechelp ; Alt-F5 Help (F15)
set key \2413 \kdecdo ; Alt-F6 Do (F16)
set key \2414 \kdecF17 ; Alt-F7 F17
set key \2415 \kdecF18 ; Alt-F8 F18
set key \2416 \kdecF19 ; Alt-F9 F19
set key \2417 \kdecF20 ; Alt-F10 F20
; DEC cursor keypad equivalents:
set key \327 \kdecfind ; Home Find
set key \335 \kdecselect ; End Select
set key \329 \kdecprev ; PgUp Prev Screen
set key \337 \kdecnext ; PgDn Next Screen
set key \330 \kdechelp ; Keypad - Help
set key \334 \kdecdo ; Keypad + Do
set key \338 \kdecinsert ; Insert Insert Here
set key \339 \kdecremove ; Del Remove
; End of VT300.INI