home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
World of OS/2
/
W_OS_2.BIN
/
READ.ME
< prev
next >
Wrap
Text File
|
1994-06-23
|
2KB
|
63 lines
This is a Customer Service Disk (CSD) for the IBM C Set++ Class
Libraries Source.
*************************************************************************
* *
* This CSD contains fixes that apply only to C Set++ Class Libraries *
* Source version 2.01. *
* *
*************************************************************************
------------------------------------------------------------------------
This CSD is provided via Software Installer.
Install as follows:
Create diskettes containing the CSD, and install the CSD
from the diskettes. You will need one disk for each .IMG
file in the CSD. To create diskettes, make the directory where
the CSD files are located the current directory. Then for each
.IMG file place a new disk in the drive and enter:
LOADDSKF [d:][path]ICLSRC[x].IMG [a:] /F
Where a: is the drive letter of the diskette drive where the CSD
diskettes are to be created. CSD diskettes should be 1.44Mb
3-1/2" diskettes.
To install a CSD from diskettes, invoke the install program
as follows:
[d:][path]INSTALL
The install program will prompt for additional diskettes
as required.
------------------------------------------------------------------------
The following conditions must exist for CSD installation to be
successful:
(1) You must have already installed the IBM C Set++ Class
Libraries Source product.
(2) The LIBPATH specified in your CONFIG.SYS file must include the
directory '.' (single period). OS/2 2.x puts this in your
LIBPATH by default.
------------------------------------------------------------------------
This CSD applies fixes to only the IBM C Set++ Class Libraries Source
product.
A list of the fixes contained in this CSD can be found in the file
CSDFIXES.LST. The fixes are cumulative, meaning that this CSD contains
all fixes described in CSDFIXES.LST, even if they were fixed on a prior
CSD.
The complete list of files in this CSD can be found in the file
SERVICE.LST.
------------------------------------------------------------------------