home *** CD-ROM | disk | FTP | other *** search
/ The World of Computer Software / World_Of_Computer_Software-02-387-Vol-3of3.iso / w / wtfmtp.zip / READ.ME next >
Text File  |  1987-09-21  |  2KB  |  62 lines

  1.                                                             August/15/1987
  2.  
  3.  
  4.  
  5.  
  6.                  WESTERN DIGITAL CORP. AT FORMAT ROUTINE
  7.  
  8.                              WDFMT   2.10
  9.  
  10.  
  11.  
  12.  
  13.  
  14.     WDFMT can be used on any Western DIgital AT Disk Controller to perform
  15.     any of the following tasks.
  16.  
  17.             FORMAT         do  a low level format of the disk.
  18.  
  19.             VERIFY         verify the entire disk.
  20.  
  21.             BAD TRACK      mark  bad  tracks that  were found
  22.                            and/or enter the bad track map.
  23.  
  24.             SURFACE TEST   perform a surface test of the disk.
  25.  
  26.     In order to format a drive, one must complete the following steps;
  27.  
  28.           1)  Enter drive parameters when prompted by the program
  29.               or at the DOS command line as shown below.
  30.  
  31.      WDFMT  drive#   #cyls  #head  #sectors  interleave  precomp-cyl skew
  32.  
  33.           2)  Select the FORMAT option from the main menu and press <CR>.
  34.  
  35.           3)  When the format is complete select the VERIFY option from
  36.               the main menu.
  37.  
  38.           4)  When the verify is complete,  select the BAD TRACK option
  39.               from  the  main  menu.  The program  will  give a list of
  40.               bad tracks found  and ask if the tracks  should be marked
  41.               as bad. Next, the user is asked to enter the manufacturer
  42.               bad track map.
  43.  
  44.           5)  If a surface test  is  desired  this can  be  done now by
  45.               selecting  SURFACE  TEST  from  the  main menu.  When the
  46.               test  is  complete,  the  user  should  return to the BAD
  47.               TRACK option to mark bad tracks found.
  48.  
  49.     WDFMT can keep track of 300 errors at a time. If more than 300 errors
  50.     are found and are to be marked bad,  the user will have to repeat the
  51.     VERIFY/SURFACE TEST followed by the BAD TRACK for each group of 300.
  52.         
  53.     In the drive parameter list the user is asked about alternate sector.
  54.     If alternate sector is enabled the formatter will create an alternate 
  55.     sector that will be used if one sector is found to  be bad during the
  56.     verify  or  surface test.  When using this option one less sector per 
  57.     track will available  to  DOS i.e. if you enter 35 sectors per  track
  58.     the formatter will format sectors 1 through 34 and sector 0.
  59.  
  60.  
  61.     
  62.