home *** CD-ROM | disk | FTP | other *** search
/ The World of Computer Software / World_Of_Computer_Software-02-387-Vol-3of3.iso / t / t2305sv.zip / CONFIG.TEL < prev    next >
Text File  |  1992-04-27  |  15KB  |  342 lines
  1. #
  2. #  Example host file for Telnet 2.3
  3. #
  4. #  "funny, this configuration file is readable ..."
  5. #
  6. #  This file is free form
  7. #  Separators are any char <33 and :;=
  8. #
  9. #  The form is keyword=value for each parameter.
  10. #  The first set of parameters refer to the whole program's defaults.
  11. #  These parameter values can be in any order.
  12. #  Following this are the individual machine specs.
  13. #  If the first machine is name "default", then it contains default
  14. #  values for the rest of the machines.
  15. #
  16.  
  17. #
  18. # Below is functions added by Gunnar Dahlström
  19. #
  20.  
  21. language=S                                      # S = Swedish translating
  22.                                                 # E = No translating
  23. printer=1                                       # 1 = HP LaserJet II (132 tkn/rad)
  24.                                                 # 2 = IBM Graphics printer (132 tkn/rad)
  25.                                                 # 3 = HP LaserJet  (landscape)
  26.                                                 # 4 = HP LaserJet  (portrait, 132 tkn/rad)
  27.                                                 # 5 = IBM Proprinter (132 tkn/rad)
  28. pport=2                                         # Which LPT port to use (1-3);
  29.  
  30. #
  31. # End of adding
  32. #
  33.  
  34. myip=192.42.172.3           # required, your IP number
  35. #myip=RARP                  # receive my IP number from a RARP server
  36. #myip=BOOTP                 # receive my IP number from a BOOTP server
  37.                             #   legal values are: a number of the form:
  38.                             #       x.x.x.x, RARP, or BOOTP
  39.                             #   Defaults to 127.0.0.1
  40. netmask=255.255.255.0       # subnetting mask
  41.                             #   Default is 0.0.0.0
  42.  
  43. #The following are the ISA boards supported:
  44.  
  45. #hardware=atalk             # network adapter board (Appletalk)
  46. #interrupt=60
  47.  
  48. #hardware=3c501             # network adapter board (3 COM 501)
  49. #address=d000               # shared memory address
  50. #ioaddr=300                 # I/O address
  51. #interrupt=5                # hardware IRQ interrupt
  52.  
  53. #hardware=star10            # network adapter board (AT&T starlan 10)
  54. #address=d800               # shared memory address
  55. #ioaddr=300                 # I/O address
  56. #interrupt=5                # hardware IRQ interrupt
  57.  
  58. #hardware=pcnic             # network adapter board (Ungermann-Bass PC-NIC)
  59. #address=d800
  60. #interrupt=5
  61.  
  62. #hardware=3c503             # network adapter board ( 3 Com 503)
  63. #ioaddr=280
  64. #address=dc00
  65. #interrupt=5
  66. #wire=thick
  67.  
  68. #hardware=packet            # network adapter board (packet driver interface)
  69. #interrupt=0
  70. #ioaddr=0
  71.  
  72. hardware=ni5210             # network adapter board (Micom NI5210 )
  73. address=d000
  74. ioaddr=360
  75. interrupt=2
  76.  
  77. #hardware=wd800             # network adapter board (Western Digital WD8003E)
  78. #address=d800
  79. #ioaddr=360
  80. #interrupt=5
  81.  
  82. #hardware=wd800             # network adapter board (Western Digital WD8003EB)
  83. #address=d800               # Remember to run the 'SETUP' program
  84. #ioaddr=360                 #       provided by Western Digital to enable
  85. #interrupt=3                #       the board correctly!
  86.  
  87. #The following are the MCA boards supported:
  88.  
  89. #hardware=wd8003a            # network adapter board (Western Digital WD8003A)
  90. #address=c400
  91. #interrupt=10
  92. #ioaddr=280
  93.  
  94. #hardware=ni9210            # network adapter board (Micom ni9210)
  95. #address=c800
  96. #interrupt=9
  97. #ioaddr=300
  98.  
  99. #hardware=nicps2            # network adapter board (Ungermann-Bass NICps/2)
  100. #address=d000
  101. #interrupt=5
  102. #ioaddr=1550
  103.  
  104. #hardware=3c523             # network adapter board (3Com 523)
  105. #address=d800
  106. #interrupt=7
  107. #ioaddr=1300
  108.  
  109.  
  110. #cursortop=2                # option to set the top of the cursor block
  111.                             # measured in scanlines from the top of the
  112.                             # character block
  113.                             #   Default is -1 (don't modify the existing setting)
  114.  
  115. #cursorbottom=7             # option to set the bottom of the cursor block
  116.                             # measured in scanlines from the top of the
  117.                             # character block
  118.                             #   Default is -1 (don't modify the existing setting)
  119.  
  120. #broadcast=141.142.103.0    # broadcast IP number
  121.                             #   Default is 255.255.255.255
  122.  
  123. windowgoaway=yes            # whether windows go away when closed
  124.                             #   Default is no
  125.  
  126. autoscroll=no               # whether to autoscroll when at the top of the
  127.                             # screen in scrollback
  128.                             #   Default is yes
  129.  
  130. #clock=off                  # whether the clock is displayed or not
  131.                             #   Default is on
  132.  
  133. myname=Hawkwind.ncsa.uiuc.edu   # used in LPR to notify the LPR server
  134.                             # who is printing
  135.                             #   Defaults to none
  136.  
  137. termtype="vt100"            # the type of terminal emulation to perform
  138.                                                         # currently only vt100 is supported
  139.                             #   Default is vt100
  140.  
  141. #outputfile=telnet.out      # path name of the output mapping file
  142.                             #   Defaults to none
  143.  
  144. #keyfile=keymap.key         # path name of your keyboard re-mapping file
  145.                             #   Defaults to none
  146.  
  147. beep=yes                    # display musical note in session status
  148.                             # on the status line when a ascii 7 is received
  149.                             # in that session
  150.                             #   Defaults to no
  151.  
  152. services=services.tel       # path to the services file for displaying
  153.                             # network information
  154.                             #   Defaults to none
  155.  
  156. tek=yes                     # enable tektronix graphics
  157.                             #   Default is on
  158.  
  159. video=ega                   # type of video screen
  160.                             #    Legal values for video are:
  161.                             #    cga,ega,pga,no9,hercules,ega43,vga50
  162.                             #   Default is ega
  163.  
  164. bios=no                     # don't use slow BIOS screen access
  165.                             #    bios=yes to reduce flicker on cga
  166.                             #    bios=yes for TopView or Windows
  167.                             #   Default is no
  168.  
  169. ftp=no                      # do you want ftp enabled?
  170.                             #   Default is no
  171.  
  172. rcp=no                      # do you want rcp enabled?
  173.                             #   Default is no
  174.  
  175. #domainretry=3              # number of domain lookup retries
  176.                             #   Default is 3
  177.  
  178. domain="ncsa.uiuc.edu"      # default domain for hostname lookup
  179.                             #   Default is none
  180. domaintime=4                # timeout for a domain lookup
  181.                             #   Defaults to 4
  182.  
  183. #concolor=070170            # Set the console colors
  184.                             #   Default is 070170
  185.  
  186. capfile=\xx                 # default name for capture file
  187.                             #   Default is none
  188.  
  189. #hpfile=hp.out              # file to write HPGL to,
  190.                             #    COM1 can be used for attached plotter
  191.                             #   Defaults to none
  192.  
  193. #psfile=ps.out              # file to write postscript to
  194.                             #   Detaults to none
  195.  
  196. #tekfile=tek.out            # file to write Tek codes to
  197.                             #   Defaults to none
  198.  
  199. arptime=8                   # arp timeout in seconds
  200.                             #    affects machines on your local network
  201.                             #   Defaults to 8
  202. #passfile="c:\telnet\telpass"   # name of file to find FTP passwords in
  203.                             #   Default is none
  204. #
  205. #  Following are individual machine specifications
  206. #  Gateways are used in order that they appear in the file
  207. #  Nameservers rotate, #1, #2, #3, #1, #2 when a request fails
  208. #
  209. #  The machine named "default" contains the fields which are automatically
  210. #  filled in for later hosts
  211. #
  212. name=default                # Session name, "default" is a reserved name
  213.                             #   Not a real machine, default parameters only
  214. #host=sri-nic.arpa          # Actual host name of machine, not session name
  215.                             #   Required
  216. #hostip=10.0.0.51           # IP address of host, example is for SRI-NIC
  217.                             #   Required
  218. #gateway=1                  # This machine is a gateway for me
  219.                             #   Default is no (0)
  220. #nameserver=1               # This machine has a DOMAIN name server for me
  221.                             #   Default is no (0)
  222. scrollback=400              # number of lines of scrollback per session
  223.                             #   Default is (0)
  224. #clearsave=on               # whether to save cleared line in scrollback
  225.                             #   Default is on
  226.  
  227. # color codes for a specific session:
  228. #       black, blue, green, cyan, red, magenta, yellow, white
  229. #       BLACK, BLUE, GREEN, CYAN, RED, MAGENTA, YELLOW, WHITE
  230. #
  231. #       NOTE: when the highlighted colors are used for a background color,
  232. #               they produce blinking text.
  233. nfcolor=white                   # vt100 normal foreground color
  234.                                 #   Default is green
  235. nbcolor=black                   # vt100 normal background color
  236.                                 #   Default is black
  237. bfcolor=red                     # vt100 blink foreground color
  238.                                 #   Default is black
  239. bbcolor=blue                    # vt100 blink background color
  240.                                 #   Default is green
  241. rfcolor=black                   # vt100 reverse foreground color
  242.                                 #   Default is blue
  243. rbcolor=white                   # vt100 reverse background color
  244.                                 #   Default is black
  245. ufcolor=red                     # vt100 underline foreground color
  246.                                 #   Default is blue
  247. ubcolor=cyan                    # vt100 underline background color
  248.                                 #   Default is black
  249.  
  250. erase=backspace                 # use delete code or backspace code for <- key?
  251.                                 #   legal values are "delete" and "backspace"
  252.                                 #   Default is "backspace"
  253. vtwrap=yes                      # should VT100 be in wrap mode or not?
  254.                                 #   Default is no
  255. #vtwidth=80                     # width of the vt100 screen
  256.                                 #   legal values are 80 and 132
  257.                                 #   Default is 80 (132 may not work correctly)
  258. crmap=4.3BSDCRNUL               # map of the CR key for compatibility
  259.                                 #   legal values are "4.3BSDCRNUL" and "LF"
  260.                                 #   Default is "LF"
  261. #duplex=half                    # modifier for non-echo mode, forces send
  262.                                 #   legal value are "full" and "half"
  263.                                 #   Default is full duplex
  264. #font=Monaco                    # font for the window text (Unsupported)
  265.                                 #   Default is Monaco
  266. #fsize=9                        # fontsize for the window text (Unsupported)
  267.                                 #   Deafult is 9
  268. #port=23                        # value of the port to telnet to
  269.                                 #   Default is 23
  270. #ftpoptions="-n"                # modifier for the 'ftp back to PC' string
  271.                                 # The string is sent as:
  272.                                 #       "ftp <ftpoptions> <IP>
  273.                                 #   Default is none
  274. #outputmap=yes                  # Whether to use the output mapping for this
  275.                                 #   machine.
  276.                                 #   Legal values are: "yes" or "no"
  277.                                 #   Default is no
  278.  
  279. #  The following entries affect the tuning of TCP connections to this host.
  280. #  They should be set by the network administrator who is familiar with
  281. #    the requirements of your specific network.
  282. contime=30              # timeout in seconds to try connection
  283.                                                 #   before returning error to user
  284.                         #   Default is (20)
  285. retrans=17              # starting retransmit time out in ticks
  286.                         #   1/18ths of sec
  287.                         #   Default is (5)
  288. mtu=1024                # maximum transmit unit in bytes
  289.                                                 #   outgoing packet size, MAX=1024
  290.                         #   Default is (512)
  291. maxseg=1024             # largest segment we can receive
  292.                                                 #   whatever the hardware can take, MAX=2048
  293.                         #   Default is (1024)
  294. rwin=1024               # most bytes we can receive without ACK
  295.                                                 #   =TCP window size, MAX=4096
  296.                                                 #   larger isn't always better
  297.                         #   Default is (1024)
  298.  
  299. #
  300. #  Below this line, most of the communication parameters are obtained
  301. #   from the "default" host entry.
  302. #  Machine names, IP addresses, and special communication parameters are
  303. #   present when needed.
  304. name=paninaro; hostip=141.142.103.150
  305. name=aragorn;  hostip=141.142.103.170
  306. name=rexfelis; hostip=141.142.103.171
  307. name=arrakis;  hostip=141.142.103.151
  308. name=threndor; hostip=141.142.103.169
  309. name=void ; hostip=141.142.103.20; nameserver=3 erase=delete
  310. name=v; copyfrom=void
  311. name=yoyodyne ; hostip=141.142.103.46; nameserver=4 erase=delete
  312. name=yoyo; copyfrom=yoyodyne
  313. name=imsasun.imsa.edu ; hostip=143.195.1.2; erase=delete
  314. name=imsa; copyfrom imsasun.imsa.edu
  315. name=hogan; hostip=141.142.222.1; nameserver=2
  316. name=sauron; hostip=141.142.103.44;
  317. name=harriett; hostip=128.174.23.74 erase=delete
  318. name=sunc1; hostip=128.174.244.81
  319. name=sunc2; hostip=128.174.244.82
  320. name=sunc4; hostip=128.174.244.84
  321. name=sunc5; hostip=128.174.244.85
  322. name=sunc6; hostip=128.174.244.86
  323. name=sunc7; hostip=128.174.244.87
  324. name=uiucuxa ; hostip=128.174.2.3 ; erase=backspace;
  325. name=uxa ; copyfrom=uiucuxa
  326. name=ux1.cso.uiuc.edu; hostip=128.174.5.59; erase=backspace
  327. name=ux1; copyfrom ux1.cso.uiuc.edu
  328. name=aries; hostip=128.174.90.55
  329. name=u2; hostip=128.174.10.44
  330. name=cray2 ; copyfrom=u2
  331. #name=103gate  hostip=141.142.103.145 gateway=1
  332. name=next hostip=192.42.172.1 gateway=1; erase=delete; consoledebug=1; #outputmap=yes;
  333. name=arena hostip=141.142.103.31
  334. name=newton hostip=141.142.2.2 ; nameserver=1
  335. name=zaphod hostip=141.142.20.50 copyfrom newton
  336. name=z copyfrom zaphod port = 25
  337. name=ncsad ; hostip=128.174.10.48 crmap=no
  338. name=cray ; copyfrom=ncsad
  339. name=xmp48 ; copyfrom=ncsad
  340. name=uicsrd ; hostip=128.174.1.2
  341. name=csrd ; copyfrom=uicsrd
  342.