home *** CD-ROM | disk | FTP | other *** search
/ The World of Computer Software / World_Of_Computer_Software-02-386-Vol-2of3.iso / b / biketune.zip / 37 < prev    next >
Text File  |  1990-12-12  |  1KB  |  44 lines

  1. text/0/0
  2. bent. This would  cause a weak rim
  3. that  may bend  again, or  perhaps
  4. some spokes  may break eventually.
  5. In the case  of severely bent rims
  6. you must re-bend  the wheel before
  7. adjusting the  spokes. Standing on
  8. the   wheel,  or   leaning  on  it
  9. against a table will do the trick.
  10. Some people will hit it with a big
  11. rubber mallet. However  you do it,
  12. be sure  you are operating  on the
  13. exact area  where the bend  is. If
  14. you accidentally add another bend,
  15. instead  of fixing  the first one,
  16. the  repair  will   be  much  more
  17. difficult.
  18.      Re-bending a wheel is a skill
  19. that requires lots  of practice to
  20. be  a  reliable  repair technique.
  21. Good Luck!
  22. ~
  23.  
  24. text/325/0
  25.  
  26.            FLAT SPOTS
  27.  
  28.      Flat  spots can  be repaired.
  29. Sometimes  you  can   fix  one  by
  30. loosening  the spokes  at the flat
  31. spot and tightening  all the other
  32. spokes  in the  wheel. More severe
  33. flat spots require removing two or
  34. three spokes at  the damaged area,
  35. hitting  the  rim  outward  with a
  36. mallet until it  bulges out just a
  37. little  beyond   round,  and  then
  38. reconnecting  and  tightening  the
  39. spokes where the flat spot used to
  40. be.
  41.  
  42. ~
  43.  
  44.