home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The World of Computer Software
/
World_Of_Computer_Software-02-386-Vol-2of3.iso
/
a
/
awnotes.zip
/
SHIVA.TXT
< prev
next >
Wrap
Text File
|
1992-12-22
|
1KB
|
33 lines
-------------------------------------------------------------------------------
SHIVA NETMODEM/E and pcANYWHERE/LAN Setup
-------------------------------------------------------------------------------
The following details how to load the Shiva drivers, use the Chooser program to
select the Netmodem/E and COM ports, and configure pcANYWHERE/LAN for dial out
capability.
1) Install the Shiva drivers per Shiva's instructions.
2) At the DOS prompt, type CHOOSER and press enter
Then select the Netmodem/E units you want to use.
Chooser makes a SHIVA.INI file which is what is referenced when
the Shiva driver is used.
3) Type SHIVACOM and press enter.
If the driver is loaded successfully the system displays the
message:
SHIVA NETMODEM/E COMMUNICATION DRIVER SUCCESSFULLY LOADED
4) In the remote operation of the LAN version setup the hardware
configuration as follows:
Device/Port: NASI/NCSI: *:*:*
Modem: US Robotics V32/V.32bis
Data Rate: 57600
Parity: None
Flow Control: RTS/CTS
Conn. Started by: Carrier Detect (DCD)
Conn. Started by: Carrier Detect (DCD)
_______________________________________________________________________________
SYMANTEC has a number of useful documents that are available through this BBS.