home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
The C Users' Group Library 1994 August
/
wc-cdrom-cusersgrouplibrary-1994-08.iso
/
vol_100
/
140_01
/
key.c
< prev
next >
Wrap
Text File
|
1985-03-10
|
2KB
|
86 lines
/*
This utility will program strings under the keys in the numeric keypad
on an ADM-31 terminal with version 4.00 or later firmware. The maximum
number of characters that can be stored under ALL the keys is 80.
Version 1.0 Initial release in 'C', 10/March/1982
By Bill Bolton
Software Tools,
P.O. Box 80,
Newport Beach,
NSW, 2106,
AUSTRALIA
*/
#include BDSCIO.H
main()
{
int i;
int length;
char answer;
char string[10][80];
/* Clear any existing programming */
printf(CLEARS);
for(i = 0; i < 10; i++) {
printf("H%d%c!%d%s",i,ESC,i,CLEARS);
}
/* Tell them what we are about */
printf("ADM-31 Keypad Programming Utility, by Bill Bolton, ");
printf("Software Tools, 1982\n\n");
printf("This utility will program the numeric key pad");
printf(" on a Lear Siegler ADM-31\n");
printf("terminal with revision 4.xx firmware.\n\n");
printf("A maxiumum of 80 characters may be programmed");
printf(" under all keys.\n\n");
printf("If you don't want to program a key just press 'Return'.\n\n");
/* Now fetch the strings to be programmed under keys,
if <CR> pressed, make the string the numeric value on the
key top under the key...i.e. no change */
length = 0;
for (i = 0; i < 10; i++) {
printf("String for numeric pad key %d :",i);
gets(string[i]);
if(string[i][0] == 0)
sprintf(string[i],"%d",i);
length += strlen(string[i]);
if(length >= 80) {
printf("\nTerminal key buffer full !\7\n");
printf("Hit any key to program strings entered so");
printf(" far or Control-C to quit");
getchar();
break;
}
printf("Terminal buffer space remaining = %d\n",80 - length);
}
/* Clear the screen */
printf(CLEARS);
/* Program the keys */
for (i = 0; i < 10; i++) {
printf("H%s%c!%d%s",string[i],ESC,i,CLEARS);
}
/* Finish up */
printf("Do you want to enable programmed functions");
printf(" (Y/N 'Return' = Y) ");
if((answer = toupper(getchar())) != 'N') {
printf("\n%c!YKeys programmed!",ESC);
}
printf("\n\nFinished programming numeric keys.\n");
exit();
}