home *** CD-ROM | disk | FTP | other *** search
/ Network Support Encyclopedia 96-1 / novell-nsepro-1996-1-cd2.iso / download / netware / wsos21.exe / NLS / ENGLISH / INSTALL.DOC < prev    next >
Text File  |  1994-10-26  |  71KB  |  2,429 lines

  1. STARTMESSAGE 01 ( Help screen for getting started - Requester Running )
  2.    Welcome to the NetWare Installation program.
  3.  
  4.    This installation program is used for both NetWare Client for OS/2
  5.    and NetWare for OS/2. See options under the Installation menu.  
  6.  
  7.    NetWare Client for OS/2 has been installed on this workstation and
  8.    is currently running. You have the following options available:
  9.  
  10.    *  To install a new version of NetWare Client for OS/2, choose "Requester
  11.        on workstation" from the Installation menu. 
  12.        ***********************************************************************
  13.        IMPORTANT!  Previous versions of the NetWare statements in the
  14.        CONFIG.SYS may not be compatible with NetWare Client for OS/2
  15.        version 2.11. Be sure to choose "Edit CONFIG.SYS and Copy All Files"
  16.        from the Requester Installation window. This is the default option
  17.        of the installation utility. Choosing this option will ensure that
  18.        proper paths will be set up and drivers will be loaded in the
  19.        correct order in the CONFIG.SYS.
  20.        ***********************************************************************
  21.  
  22.    *  To configure or reconfigure NetWare Client for OS/2 on this workstation,
  23.        choose "This workstation" from the Configuration menu.
  24.  
  25.    *  To install support for workstations without hard disks, 
  26.       choose "Remote workstations" from the Installation menu.
  27.  
  28.    *  To configure NetWare Client for OS/2 for workstations without
  29.       hard disks, choose "Remote workstations" from the Configuration menu.
  30.    
  31.    *  To install NetWare for OS/2 on this machine, there are two
  32.       options.
  33.  
  34.       For a custom installation, choose "NetWare Server for OS/2" from the Installation
  35.       menu.
  36.  
  37.       For a simplified installation, choose "Simplified NetWare Server for OS/2" from the
  38.       Installation menu. The simplified installation assumesthe following:
  39.          - You have NetWare Client software installed.
  40.          - You want NetWare Client and NetWare to share a network board.
  41.          - You are not using any IBM communication products.
  42.          - You will accept a random IPX address and default server information
  43.            (keyboard mapping, country code, etc.).
  44.          - You do not want to mirror or duplex the hard disk.
  45.          - You want only one NetWare volume.
  46.          - You want the CONFIG.SYS to be saved automatically.
  47.          - You do not want to edit the AUTOEXEC.NCF and STARTUP.NCF files.
  48.          - You want a default Directory Services hierarchy. This is a single container
  49.            for all objects.
  50.  
  51.    *  To upgrade NetWare for OS/2 on this machine, choose
  52.       "Upgrade NetWare Server for OS/2" from the Installation menu.   
  53.  
  54.    NOTE: You can choose "ReadMe" from the menu to display the 
  55.    ReadMe file shipped with this version of NetWare Client for OS/2.
  56. ENDMESSAGE
  57.  
  58. STARTMESSAGE 02 ( Help screen for getting started - Requester NOT Running )
  59.    Welcome to the NetWare Installation program.
  60.  
  61.    NetWare Client for OS/2 is not running on this workstation
  62.    for one of the following reasons:
  63.  
  64.    1) The workstation has not been rebooted since it was installed.
  65.    2) It has not been installed on this workstation.
  66.    
  67.  
  68.    You have the following options available:
  69.    
  70.    *  To activate the NetWare Client for OS/2 software that is already installed,
  71.       reboot the workstation.
  72.  
  73.    *  To install NetWare Client for OS/2, choose "Requester on
  74.        workstation" from the Installation menu.
  75.  
  76.    *  To configure or reconfigure NetWare Client for OS/2 on this workstation, choose
  77.       "This workstation" from the Configuration menu.
  78.  
  79.    *  To install NetWare for OS/2 on this machine, there are two options.
  80.  
  81.       For a custom installation, choose "NetWare Server for OS/2" from the
  82.       Installation menu.
  83.  
  84.       For a simplified installation, choose "Simplified NetWare Server for OS/2"
  85.       from the Installation menu. The simplified installation assumes the following:
  86.          - You have NetWare Client software installed.
  87.          - You want NetWare Client and NetWare to share a network board.
  88.          - You are not using any IBM communication products.
  89.          - You will accept a random IPX address and default server information
  90.            (keyboard mapping, country code, etc.).
  91.          - You do not want to mirror or duplex the hard disk.
  92.          - You want only one NetWare volume.
  93.          - You want the CONFIG.SYS to be saved automatically.
  94.          - You do not want to edit the AUTOEXEC.NCF and STARTUP.NCF files.
  95.          - You want a default Directory Services hierarchy. This is a single container
  96.            for all objects.
  97.  
  98.    *  To upgrade NetWare for OS/2 on this machine, choose
  99.       "Upgrade NetWare Server for OS/2" from the Installation menu.   
  100.  
  101.    NOTE: You can choose "ReadMe" from the menu to display the 
  102.    ReadMe file shipped with this version of NetWare Client for OS/2.
  103. ENDMESSAGE
  104.  
  105. STARTMESSAGE 03 (Install complete go to configuring)
  106. Installation complete.
  107.  
  108. ****************************************************************************
  109. IMPORTANT!!!!  - The following must be manually changed:
  110.  
  111. * DOS_LASTDRIVE setting in the DOS Settings notebook should be set 
  112.    to the last local drive for each DOS and WIN-OS/2 session. See "Changing
  113.    and Saving DOS and WIN-OS/2 Settings" in the online OS/2 Master Help
  114.    Index.
  115.  
  116. * The default workstation Ethernet frame type is Ethernet_802.2. Make sure your
  117.    server and workstation frame types are the same. Configuration is done 
  118.    by selecting "This workstation..." from the Configuration menu.
  119. ****************************************************************************
  120.  
  121.   Configuration is necessary for the following situations:
  122.  
  123.   * Your network board is not using the default settings.
  124.   * Your workstation has more than one board.
  125.   * Your Ethernet frame type is other than Ethernet_802.2.
  126.   * You use Named Pipes, NetBIOS, or Token-Ring Source Routing. 
  127.   * NetWare Client for OS/2 will share the network board with LAN Server.
  128.   * You have more than one Directory tree at your site.  
  129.  
  130. Select "This workstation..." from the Configuration menu to access the
  131. configuration utility.
  132. ENDMESSAGE
  133.  
  134. STARTMESSAGE 04 (Configuration complete)
  135.  
  136.   You have finished configuring NetWare Client for OS/2.
  137.  
  138.   To exit the installation program, choose "Close" from the menu 
  139.   in the top-left corner of the window.
  140. ENDMESSAGE
  141.  
  142. STARTMESSAGE 05 (RPL installation complete)
  143.  
  144.   You have installed the options you selected for remote boot workstations
  145.   support.  
  146.  
  147.   You can configure remote workstations by choosing "Remote
  148.   workstations" from the "Configuration" menu. 
  149.  
  150.   To exit the installation program, choose "Close" from the menu in 
  151.   the top-left corner of the window. 
  152. ENDMESSAGE
  153.  
  154. STARTMESSAGE 06 (Installation of NetWare Server for OS/2 Complete)
  155.  
  156.   You have completed the first half of installing NetWare for OS/2.
  157.   To continue, you must reboot your machine. The second half of the
  158.   installation will start automatically. Refer to the NetWare 4.1 Installation
  159.   and Upgrade manual for instructions.
  160.  
  161.   NOTE: If installation is aborted without being completed, you can bring down
  162.   the server and in the NetWare Server directory (default is NWOS2) type 
  163.   "nwinstal" to bring up the server and rerun the second half of the 
  164.   server installation.
  165.  
  166.   To exit this installation program, choose "Close" from the menu in
  167.   the top-left corner of the window. 
  168. ENDMESSAGE
  169.  
  170.  
  171. STARTMESSAGE 09 ( Help screen for NET.CFG Options )
  172.  
  173. STARTTOPIC How to use this screen
  174. STARTUSAGE
  175.  Type the desired NET.CFG options in the Current NET.CFG
  176.  File Contents box.  A NET.CFG file is not created by default.
  177.  If a NET.CFG file could not be found, the Current NET.CFG
  178.  File Contents box will be empty.
  179.  
  180.  The NET.CFG Options box in the upper left shows the proper
  181.  syntax for each NET.CFG option.
  182.  
  183.  This box that you're reading from gives information regarding
  184.  the option highlighted in the NET.CFG Options box.  Select the
  185.  type of information you want by choosing the Usage,
  186.  Description, or Example buttons to the right of this box.
  187.   ENDUSAGE
  188. ENDTOPIC
  189.  
  190. STARTTOPIC Reasons to configure
  191. STARTUSAGE
  192. You must configure if
  193.  
  194. * You want to avoid typing your context on the command line
  195.   whenever you log in
  196.   
  197.     Define a Name Context statement under the NetWare 
  198.     Requester heading in the NET.CFG.
  199.  
  200. * Your network uses an Ethernet frame type other than 
  201.   Ethernet_802.2
  202.  
  203.     Ethernet_802.2 is the new default for the workstation
  204.     ODI drivers. Define a Link Driver Frame statement.
  205.  
  206. * You have more than one directory tree at your site
  207.  
  208.     Define a Preferred Tree statement under the NetWare
  209.     Requester heading in the NET.CFG. 
  210.  
  211. * Your workstation board is not using the default settings
  212.  
  213.     Define a Link Driver statement for the board.
  214.  
  215. * Your workstation has more than one board
  216.  
  217.     Define a Link Driver statement for each board. 
  218.  
  219. * NetWare Client for OS/2 will share a network board with
  220.   other communications software, such as LAN Server
  221.  
  222.     See the NetWare Client for OS/2 manual.
  223.  
  224. You can also configure the default setup for Named Pipes,
  225. NetBIOS, or Token Ring Source Routing. Select the specific
  226. option for additional help. 
  227. ENDUSAGE
  228. ENDTOPIC
  229.  
  230.  
  231. STARTTOPIC Sample NET.CFG file
  232. STARTUSAGE
  233. link driver ne2000 
  234.    int 5
  235.    port 340
  236.    frame ethernet_802.3
  237.    frame ethernet_802.2
  238. link driver ne1000
  239.    int 3
  240.    port 300
  241.    node address 02608c861759
  242. protocol stack spx
  243.    sessions 255
  244. netware requester
  245.    name context "sales.novell"
  246.    preferred tree sequoia
  247.    default login drive f
  248. named pipes
  249.    client sessions 40
  250.  
  251.  NOTE: Default Login Drive requires changes to the 
  252.  CONFIG.SYS. For instructions, see NetWare Client
  253.  for OS/2 manual.
  254. ENDUSAGE
  255. ENDTOPIC
  256.  
  257. STARTTOPIC Format of NET.CFG options
  258. STARTEXAMPLE
  259. Sample NET.CFG file:
  260.  
  261. link driver ne2000 
  262.    int 5
  263.    port 340
  264.    frame ethernet_802.3
  265.    frame ethernet_802.2
  266. link driver ne1000
  267.    int 3
  268.    port 300
  269.    node address 02608c861759
  270. protocol stack spx
  271.    sessions 255
  272. netware requester
  273.    name context "sales.novell"
  274.    preferred tree sequoia
  275.    default login drive f
  276. named pipes
  277.    client sessions 40
  278.  
  279.  NOTE:  Default Login Drive requires changes to the 
  280.  CONFIG.SYS. See NetWare Client for OS/2 manual.
  281.    
  282. ENDEXAMPLE
  283. STARTUSAGE
  284. Type options at the left margin with no spaces before or after.
  285.  
  286. Type one option per line. 
  287.  
  288. Type settings, one per line, on the lines following the options to 
  289. which they apply. Use the Spacebar to indent settings at least 
  290. 1 space. Do not use the Tab key in this program. Using the Tab
  291. key is OK if you edit the file from a text editor rather than this
  292. program.
  293.  
  294. Place a hard return at the end of every line, including 
  295. the last one. If you don't put a return at the end of the last line, 
  296. the line will be ignored. 
  297.  
  298. Blank lines are ignored, so you can use them to separate options. 
  299.  
  300. Precede comments with a semicolon.
  301.  
  302. Options and settings are not case-sensitive. 
  303. ENDUSAGE
  304. ENDTOPIC
  305.  
  306. STARTTOPIC -------------------
  307. ENDTOPIC
  308.  
  309. STARTTOPIC Daemon Configuration
  310.  
  311. STARTUSAGE
  312. DAEMON CONFIGURATION
  313.    MESSAGE TIMEOUT number
  314. ENDUSAGE
  315. STARTDESCRIPTION
  316. Use this option to control how long network-related 
  317. error messages stay on your screen. This option controls only 
  318. pop-up and broadcast messages. 
  319.  
  320. Pop-up and broadcast messages appear in a small box on your screen 
  321. and they prompt you to "Press <Esc> to continue . . ."
  322. ENDDESCRIPTION
  323. ENDTOPIC
  324.  
  325. STARTTOPIC    message timeout number
  326. STARTEXAMPLE
  327. To prevent pop-up and broadcast messages from displaying:
  328.  
  329. daemon configuration
  330.    message timeout 0
  331. ENDEXAMPLE
  332. STARTEXAMPLE
  333. To display pop-up and broadcast messages on your screen for 
  334. 1,000 milliseconds:
  335.  
  336. daemon configuration
  337.    message timeout 1000
  338. ENDEXAMPLE
  339. STARTUSAGE
  340. MESSAGE TIMEOUT number
  341.  
  342. Replace "number" with a number of milliseconds that you want 
  343. pop-up and broadcast messages to display on your screen 
  344. before disappearing.  
  345.  
  346. To prevent pop-up and broadcast messages from displaying, 
  347. replace "number" with 0 (zero).
  348.  
  349. To display pop-up and broadcast messages until you press
  350. <Esc>, leave this line out of your NET.CFG. 
  351.  
  352. Default = Messages display until you press <Esc>.
  353. ENDUSAGE
  354. STARTDESCRIPTION
  355. Use this option to control the length of time network-related error 
  356. messages stay on your screen. This option controls only pop-up and 
  357. broadcast messages.  
  358.  
  359. Pop-up and broadcast messages appear in a small box on your screen 
  360. and prompt you to "Press <Esc> to continue . . ."
  361. ENDDESCRIPTION
  362. ENDTOPIC
  363.  
  364.  
  365. STARTTOPIC Link Driver
  366. STARTEXAMPLE                                               
  367. To configure an NE2000 board, you might type the following:
  368.  
  369. link driver ne2000
  370.    dma 5
  371.    frame ethernet_802.3
  372.    frame ethernet_802.2
  373.    int 3
  374.    mem cc000 3000
  375. ENDEXAMPLE
  376. STARTUSAGE
  377. LINK DRIVER name
  378.    ALTERNATE
  379.    DMA [index] channel
  380.    FRAME name
  381.    INT [index] irq
  382.    MEM [index] starting_address size
  383.    NODE ADDRESS number
  384.    PORT [index] starting_port [number]
  385.    PROTOCOL name id frame
  386.    SLOT number
  387.  
  388. Replace "name" with the name of the ODI driver that you
  389. want to modify.
  390.  
  391. Default = None 
  392.  
  393. Some possible driver names:
  394.  
  395.  PCN2 for IBM PC Network board II and II/A (older Novell frame
  396.  format)
  397.  PCN2L for IBM PC Network board II and II/A (newer IBM frame format 
  398.  for IBM PCN2 bridges)
  399.  NOTE: PCN2 and PCN2L drivers cannot be used in the same
  400.  workstation. 
  401.  
  402.  NE2 for Novell Ethernet NE/2
  403.  NE2_32 for Novell Ethernet NE/2-32
  404.  NE1000 for Novell Ethernet NE1000
  405.  NE2000 for Novell Ethernet NE2000
  406.  NE2100 for Novell Ethernet NE2100
  407.  
  408.  TOKEN for IBM Token-Ring PC
  409.  
  410.  ODINSUP IBM Token-Ring and Ethernet Communications Manager board
  411.  LANSUP for boards using NDIS drivers
  412.  
  413.  3C501 for 3Com EtherLink series 501
  414.  3C503 for 3Com EtherLink series 503
  415.  3C505 for 3Com EtherLink series 505
  416.  3C523 for 3Com EtherLink/MC 3C523
  417. ENDUSAGE
  418. STARTDESCRIPTION
  419. Use this option to configure the ODI driver for each network 
  420. board in your workstation.
  421.  
  422. Use this option if your boards are not using the default 
  423. settings, if you have more than one board, or if you need to
  424. define frame types. The settings for this option should match 
  425. the hardware settings for the boards. 
  426. ENDDESCRIPTION
  427. ENDTOPIC
  428.  
  429. STARTTOPIC     dma
  430. STARTEXAMPLE
  431. To set the DMA channel for a 3C505 board, type
  432.  
  433. link driver 3c505
  434.    dma 7
  435. ENDEXAMPLE
  436. STARTUSAGE
  437. LINK DRIVER name
  438.    DMA [index] channel
  439.  
  440. Replace "channel" with the number of the DMA channel used 
  441. by the board. 
  442.  
  443. Default = Set by the driver. See documentation for the board. 
  444.  
  445. (Optional) Replace "index" with #1 or #2. The driver 
  446. configuration table for each network board can store the DMA 
  447. channel number on either of two lines. The lines are labeled 
  448. #1 and #2. 
  449.  
  450. Default = #1. Most boards use this default.
  451. ENDUSAGE
  452. STARTDESCRIPTION
  453. Use the DMA setting to specify which direct memory access
  454. (DMA) channel the network interface board uses. 
  455. ENDDESCRIPTION
  456. ENDTOPIC
  457.  
  458. STARTTOPIC     frame
  459. STARTEXAMPLE
  460. To specify both Ethernet_802.2 and Ethernet_802.3 
  461. for an NE2100 board:
  462.  
  463. link driver ne2100
  464.    frame ethernet_802.3
  465.    frame ethernet_802.2
  466.  
  467. The first frame defined is the only one used for the initial Get
  468. Nearest Server request. Therefore, if you have some servers using
  469. only one frame type, such as Ethernet_802.3, put that frame type
  470. first. Then your workstation can get a default connection to 
  471. those servers. 
  472. ENDEXAMPLE
  473. STARTEXAMPLE
  474. To specify all frame types for an NE2000 board:
  475.  
  476. link driver ne2000
  477.    frame ethernet_802.3
  478.    frame ethernet_802.2
  479.    frame ethernet_II
  480.    frame ethernet_snap
  481. ENDEXAMPLE
  482. STARTUSAGE
  483. LINK DRIVER name
  484.    FRAME name
  485.  
  486. Replace "name" with a frame type. 
  487.  
  488. Default = Set by the driver. See the documentation for the board.
  489.  
  490. The frame type transmitted by the workstation should match 
  491. the type of packets transmitted by your network servers.
  492. Some possible frame types follow:
  493.  
  494. Frame type ETHERNET_802.3 works for NE1000, NE2000, 
  495.      NE2100, NE2, NE2_32, 3C501, 3C503, 3C505, 3C523, 
  496.      EXOS205, EXOS215, ODINSUP
  497.  
  498. Frame type ETHERNET_802.2 works for NE1000, NE2000, 
  499.      NE2100, NE2, NE2_32, 3C501, 3C503, EXOS205, 
  500.      EXOS215, ODINSUP, LANSUP
  501.  
  502. Frame type ETHERNET_II works for NE1000, NE2000, NE2100,
  503.      NE2, NE2_32, 3C501, 3C503, 3C505, 3C523, EXOS205, 
  504.      EXOS215, ODINSUP
  505.  
  506. Frame type ETHERNET_SNAP works for NE1000, NE2000, NE2100, 
  507.      NE2, NE2_32, 3C501, 3C503, EXOS205, EXOS215, ODINSUP, 
  508.      LANSUP
  509.  
  510. Frame type TOKEN-RING works with TOKEN, ODINSUP, LANSUP
  511.  
  512. Frame type TOKEN-RING_SNAP works with TOKEN, ODINSUP, LANSUP
  513.  
  514. Frame type IBM_PCN2_802.2 works with PCN2, PCN2L, LANSUP
  515.  
  516. Frame type IBM_PCN2_SNAP works with PCN2, PCN2L, LANSUP
  517.  
  518. Frame type NOVELL_RX-NET works with TRXNET and TRXNET2
  519.  
  520. Previous versions of NetWare Client for OS/2 required you to type
  521. "envelope type" instead of "frame type". "Envelope type" is
  522. still acceptable.
  523.  
  524. For more information about using the ODINSUP or LANSUP 
  525. drivers, see the NetWare Client for OS/2 manual. 
  526. ENDUSAGE
  527. STARTDESCRIPTION
  528. Use this setting to specify which frame type the driver
  529. for your network board uses. Use this setting for boards
  530. that support more than one frame type. 
  531.  
  532. See the NetWare Client for OS/2 manual for more information
  533. on configuring network boards. 
  534.  
  535. If you are using a PS/2 computer on a token ring network, 
  536. do not "auto-configure" with the reference diskette. Doing so may
  537. cause problems.
  538. ENDDESCRIPTION
  539. ENDTOPIC
  540.  
  541. STARTTOPIC     int
  542. STARTEXAMPLE
  543. To set the interrupt line for an NE2000 board:
  544.  
  545. link driver ne2000
  546.    int 3
  547. ENDEXAMPLE
  548. STARTUSAGE
  549. LINK DRIVER name
  550.    INT [index] irq
  551.  
  552. Replace "IRQ" with the number of the interrupt line used by 
  553. the board. 
  554.  
  555. Default = Set by the driver. See the documentation for the board. 
  556.  
  557. Before changing the interrupt setting for your board, be sure 
  558. you know what interrupt settings are used for your other hardware.
  559. For example, interrupts 2 and 9-15 are usually reserved. 
  560. Interrupts 3, 5, and 7 are usually good for network boards, but
  561. might conflict with parallel ports.
  562.  
  563. (Optional) Replace "index" with either #1 or #2. The driver 
  564. configuration table for each network board can store the 
  565. interrupt line number on either of two lines. The lines 
  566. are labeled #1 and #2. 
  567.  
  568. Default = #1. This default works for most boards. 
  569. ENDUSAGE
  570. STARTDESCRIPTION
  571. Use this setting to specify which interrupt line the network 
  572. board uses to communicate with the driver. 
  573. ENDDESCRIPTION
  574. ENDTOPIC
  575.  
  576. STARTTOPIC     mem 
  577. STARTEXAMPLE
  578. To set the memory range for a token ring board:
  579.  
  580. link driver token
  581.    mem cc000 200
  582. ENDEXAMPLE
  583. STARTUSAGE
  584. LINK DRIVER name
  585.    MEM [index] starting_address [size]
  586.  
  587. Replace "starting_address" with a hexadecimal memory address 
  588. that begins the range. This address must be 5 digits, and it must 
  589. be the same as the address designated for the board by the 
  590. manufacturer or set with the Node Address setting.  
  591.  
  592. Be sure to assign each board a unique memory range that is 
  593. not used by other hardware (VGA monitors commonly use 
  594. C6FFF and XVGA monitors commonly use CFFFF).
  595.  
  596. Default = Set by the driver. See the documentation for the board.
  597.  
  598. (Optional) Replace "size" with a hexadecimal number of paragraphs
  599. in a memory range. 
  600.  
  601. Default = Set by the driver. See the documentation for the board.
  602.  
  603. (Optional) Replace "index" with either #1 or #2. 
  604.  
  605. The driver configuration table for each network board can store the 
  606. memory range on either of two lines. The lines are labeled #1 and #2.
  607.  
  608. Default = #1. This default works for most boards.
  609. ENDUSAGE
  610. STARTDESCRIPTION
  611. Use this setting to specify what range of memory the driver can use.
  612. ENDDESCRIPTION
  613. ENDTOPIC
  614.  
  615. STARTTOPIC     node address
  616. STARTEXAMPLE
  617. To change the address for a board that uses the ODINSUP driver:
  618.  
  619. link driver odinsup
  620.    node address 02608c861759
  621. ENDEXAMPLE
  622. STARTUSAGE
  623. LINK DRIVER name
  624.    NODE ADDRESS number
  625.  
  626. Replace "number" with a hexadecimal address. You can specify 
  627. the address with either the least significant bit first 
  628. (lsb format) or the most significant bit first (msb format). 
  629.  
  630. You might want to change the node address of a board so you
  631. can more easily note when that board is used on the network. 
  632.  
  633. Default = The address printed on the board. 
  634. ENDUSAGE
  635. STARTDESCRIPTION
  636. Use this setting to change the node address of a network board. 
  637. Use this setting only with network boards that allow you to
  638. override the preset address. 
  639. ENDDESCRIPTION
  640. ENDTOPIC
  641.  
  642. STARTTOPIC     port
  643. STARTEXAMPLE
  644. To set the port address for an NE2000 board:
  645.  
  646. link driver ne2000
  647.    port 300
  648. ENDEXAMPLE
  649. STARTUSAGE
  650. LINK DRIVER name
  651.    PORT [index] starting_port [number]
  652.  
  653. Replace "starting_port" with a hexadecimal number that begins
  654. the range of I/O ports the network board uses.  
  655.  
  656. Default = Set by the driver. See the documentation for the board.
  657.  
  658. (Optional) Replace "number" with the hexadecimal number of 
  659. ports in the range. 
  660.  
  661. Default = Set by the driver. See the documentation for the board. 
  662.  
  663. (Optional) Replace "index" with either #1 or #2. The driver configuration table for each network board can store information about ports on either of two lines. The lines are labeled #1 and #2. 
  664.  
  665. Default = #1. This default works for most boards.
  666. ENDUSAGE
  667. STARTDESCRIPTION
  668. Use this setting to specify which range of I/O ports the 
  669. network board uses.
  670. ENDDESCRIPTION
  671. ENDTOPIC
  672.  
  673. STARTTOPIC     protocol
  674. STARTEXAMPLE
  675.  
  676. To specify the ARP protocol for an Ethernet II frame:
  677.  
  678. link driver ne2000
  679.    protocol arp 806 ethernet_ii
  680. ENDEXAMPLE
  681. STARTUSAGE
  682. LINK DRIVER name
  683.    PROTOCOL name ID frame
  684.  
  685. Replace "name" with the acronym of an ODI-compliant protocol. Some 
  686. common protocols are ARP, IP, IPX (the NetWare protocol), and 
  687. RARP. Default = IPX
  688.  
  689. Replace "ID" with the hexadecimal number of the protocol that 
  690. goes with the frame type you specify. Default = 0
  691.  
  692. Replace "frame" with the name of the frame type used with 
  693. the protocol. Default = Ethernet_802.2.
  694.  
  695. Some common protocols with the frame types and hexadecimal numbers
  696. they support are listed below:
  697.  
  698. IPX protocol
  699. --------------
  700. Ethernet_802.3 with a hexadecimal number of "0"
  701. Ethernet_802.2 with a hexadecimal number of "e0"
  702. Token-Ring with a hexadecimal number of "e0"
  703. IBM_pcn2_802.2 with a hexadecimal number of "e0"
  704. Ethernet_II with a hexadecimal number of "8137"
  705. Ethernet_SNAP with a hexadecimal number of "8137"
  706. Token-Ring_SNAP with a hexadecimal number of "8137"
  707. IBM_pcn2_SNAP with a hexadecimal number of "8137"
  708. Novell_trx-net with a hexadecimal number of "fa"
  709.  
  710. IP protocol
  711. -------------
  712. Ethernet_II with a hexadecimal number of "800"
  713. Ethernet_SNAP with a hexadecimal number of "800"
  714. Token-Ring_SNAP with a hexadecimal number of "800"
  715. Novell_trx-net with a hexadecimal number of "d4"
  716.  
  717. ARP protocol
  718. ---------------
  719. Ethernet_II with a hexadecimal number of "806"
  720. Ethernet_SNAP with a hexadecimal number of "806"
  721. Token-Ring_SNAP with a hexadecimal number of "806"
  722. Novell_trx-net with a hexadecimal number of "d5"
  723.  
  724. RARP protocol
  725. -----------------
  726. Ethernet_II with a hexadecimal number of "8035"
  727. Ethernet_SNAP with a hexadecimal number of "8035"
  728. Token-Ring_SNAP with a hexadecimal number of "8035"
  729. Novell_trx-net with a hexadecimal number of "d6"
  730. ENDUSAGE
  731.  
  732. STARTDESCRIPTION
  733. Use this setting to allow drivers to use ODI-compliant protocols 
  734. that have different frame types. 
  735. ENDDESCRIPTION
  736. ENDTOPIC
  737.  
  738. STARTTOPIC     slot 
  739. STARTEXAMPLE
  740. To automatically configure the drivers for an NE/2 board 
  741. in slot 4 and an NE/2 board in slot 2:
  742.  
  743. link driver ne2
  744.    slot 4
  745. link driver ne2
  746.    slot 2
  747.    
  748. The slot setting is the only Link Driver setting you need to 
  749. specify in this case. 
  750.  
  751. To scan all slots for a Novell Ethernet NE/2 board:
  752.  
  753. link driver ne2
  754.    slot ?
  755. ENDEXAMPLE
  756. STARTUSAGE
  757. LINK DRIVER name
  758.    SLOT number
  759.  
  760. Replace "number" with the number of the expansion slot the 
  761. board is using or with a question mark to tell NetWare Client
  762. for OS/2 to scan all slots.
  763.  
  764. ENDUSAGE
  765. STARTDESCRIPTION
  766. Use this setting to tell NetWare Client for OS/2 which expansion
  767. slot an EISA or microchannel board is using. 
  768.  
  769. EISA and microchannel boards are self-configuring, and NetWare Client
  770. for OS/2 can obtain all Link Driver information from the board itself.
  771. You have to tell NetWare Client for OS/2 which slot the board is using
  772. or, if you only have one board of a particular type, you have to tell
  773. NetWare Client for OS/2 to scan all slots until it finds that board. 
  774. ENDDESCRIPTION
  775. ENDTOPIC
  776.  
  777. STARTTOPIC Link Support
  778. STARTUSAGE
  779. LINK SUPPORT
  780.    BUFFERS number [buffer_size]
  781. ENDUSAGE
  782. STARTDESCRIPTION
  783. Use this option to adjust the number and size of communication 
  784. buffers used by NetWare Client for OS/2. 
  785. ENDDESCRIPTION
  786. ENDTOPIC
  787.  
  788. STARTTOPIC     buffers
  789. STARTEXAMPLE
  790. For an Ethernet configuration:
  791.  
  792. link support
  793.    buffers 15 1520
  794.    
  795. For a token ring configuration:
  796.  
  797. link support
  798.    buffers 14 4202
  799. ENDEXAMPLE
  800. STARTUSAGE
  801. LINK SUPPORT
  802.    BUFFERS number [buffer_size]
  803.  
  804. Replace "number" with a number of buffers greater than 1.  
  805. Default = 20 buffers 
  806.  
  807. Replace "buffer_size" with a number of bytes greater than 576. 
  808. Default = 1514 bytes 
  809.  
  810. NetWare Client for OS/2 cannot use more than 64 KB of memory for 
  811. communication buffers. Header information takes 5 KB.  
  812.  
  813. This means that the buffer number multiplied by the buffer 
  814. size (plus the header information) cannot be greater than
  815. 65,536 bytes. For example, 20 buffers multiplied by 1514 bytes 
  816. equals 30,280 bytes. 
  817.  
  818. The Link Support buffer size should be the same size as the 
  819. packets your workstation will receive over the network. You might
  820. want to set this buffer size equal to the largest buffer size 
  821. that the network boards in your workstation will support. 
  822.  
  823. If your workstation has performance problems running with the 
  824. TRXNET.SYS driver, you might need to set your buffers to
  825.  
  826. link support
  827.    buffers 15 4202
  828.  
  829. For information about using this setting with ODINSUP or
  830. LANSUP, see the NetWare Client for OS/2 manual.
  831. ENDUSAGE
  832. STARTDESCRIPTION
  833. Use this setting to specify the number and size of communication 
  834. buffers NetWare Client for OS/2 can use. 
  835.  
  836. You might want to increase the number of buffers if you are 
  837. running Named Pipes, if you have numerous SPX connections, or if 
  838. you have heavy network traffic.  
  839.  
  840. If you get the message "LSL out of resources," increase the 
  841. number of buffers. Otherwise, this option is not commonly used. 
  842. ENDDESCRIPTION
  843. ENDTOPIC
  844.  
  845. STARTTOPIC Named Pipes
  846. STARTUSAGE
  847. NAMED PIPES
  848.     ADVERTISE BOARD number
  849.     CLIENT SESSIONS number
  850.     SERVER SESSIONS number
  851.     MACHINE NAMES   number
  852. ENDUSAGE
  853. STARTDESCRIPTION
  854. Use this option to manage Named Pipes sessions. 
  855.  
  856. To use Named Pipes, you must have enabled it in the CONFIG.SYS file.
  857. Do this by choosing Requester on workstation from the Installation
  858. menu on the main screen of this program.
  859. ENDDESCRIPTION
  860. ENDTOPIC
  861.  
  862. STARTTOPIC     advertise board
  863. STARTEXAMPLE
  864. Configure Named Pipes server as follows in order to
  865. use the logical boards defined by the NE2000 link driver
  866. and the Ethernet_802.2 and Ethernet_802.3 frame types to
  867. advertise the server:
  868.  
  869. link driver NE2
  870.    frame ethernet_802.2       ; logical board 1
  871.    frame ethernet_II          ; logical board 2
  872.    protocol IPX   E0    ethernet_802.2
  873.    protocol IP    800   ethernet_II
  874.  
  875. link driver NE2000
  876.    frame ethernet_802.2       ; logical board 3
  877.    frame ethernet_802.3       ; logical board 4
  878.    protocol IPX   E0    ethernet_802.2
  879.    protocol IPX   0     ethernet_802.3
  880.  
  881. named pipes
  882.    advertise board 3
  883.    advertise board 4
  884. ENDEXAMPLE
  885. STARTUSAGE
  886. NAMED PIPES
  887.    ADVERTISE BOARD board_number
  888.             
  889. Replace "board_number" with the logical board number of
  890. a network board. Board_number can be a value from
  891. 1 to 16.
  892.  
  893. Logical board numbers are assigned in ascending order
  894. to each frame type as they appear in your configuration.
  895. Note that logical board numbers are assigned to defaulted
  896. frame types.
  897.  
  898. The board_number given must be the logical board number of
  899. a frame type used by IPX. (NOTE: You specify IPX 
  900. usage of a frame type by using the protocol setting under
  901. the Link Driver option).
  902.  
  903. Default = The Named Pipes server will advertise itself over 
  904. the IPX primary network board when this setting is not specified
  905. or is out of range, or if the board_number given does not
  906. match the logical board number of a frame type in use
  907. by IPX.
  908. ENDUSAGE
  909. STARTDESCRIPTION
  910. Use this setting to specify a board that the Named Pipes server uses
  911. to advertise itself. You should configure more than one of these
  912. settings only when the boards specified are part of separate networks.
  913. ENDDESCRIPTION
  914. ENDTOPIC
  915.  
  916.  
  917. STARTTOPIC     client sessions
  918. STARTEXAMPLE
  919. To allow each client 30 sessions:
  920.  
  921. named pipes
  922.     client sessions 30
  923. ENDEXAMPLE
  924. STARTUSAGE
  925. NAMED PIPES
  926.    CLIENT SESSIONS number
  927.  
  928. Replace "number" with a number from 3 to 128. 
  929.  
  930. Default = 16 sessions
  931.  
  932. You need at least one client session for each connection from an OS/2 
  933. application to a Named Pipes server. The default of 16 sessions is 
  934. usually adequate, except with applications that use many Named Pipes. 
  935. ENDUSAGE
  936. STARTDESCRIPTION
  937. Use this setting to specify the maximum number of connections any one
  938. workstation can establish with all Named Pipes servers. 
  939. ENDDESCRIPTION
  940. ENDTOPIC
  941.  
  942.  
  943. STARTTOPIC     machine names
  944. STARTEXAMPLE
  945. To set number of locally cached named pipes server names to 5:
  946.  
  947. named pipes
  948.    machine names 5
  949. ENDEXAMPLE
  950. STARTDESCRIPTION
  951. Use this setting to force Named Pipes to create a local table
  952. of server names. This is used in all sessions on an OS/2 client
  953. workstation. This setting is necessary for remote Named Pipes 
  954. operations when there are no NetWare servers on the network.
  955.  
  956.  
  957. ENDDESCRIPTION
  958. STARTUSAGE
  959. NAMED PIPES
  960.    MACHINE NAMES number
  961.  
  962. Replace "number" with the number of Named Pipes server names you
  963. want to cache, from 4 to 100.
  964.  
  965. Default = 0  (query network for Named Pipes server names)
  966. ENDUSAGE
  967. ENDTOPIC
  968.  
  969. STARTTOPIC     server sessions
  970. STARTEXAMPLE
  971. To allow each server three hundred sessions:
  972.  
  973. named pipes
  974.    server sessions 300
  975. ENDEXAMPLE
  976. STARTDESCRIPTION
  977. Use this setting to specify the maximum number of connections a
  978. Named Pipes server can support with all Named Pipes clients at 
  979. any one time.
  980. ENDDESCRIPTION
  981. STARTUSAGE
  982. NAMED PIPES
  983.    SERVER SESSIONS number
  984.  
  985. Replace number with a number greater than 2.
  986.  
  987. Novell's Named Pipes support is designed to handle more than
  988. 1,000 server sessions.   However, because of OS/2 requirements,
  989. the practical upper limit is much lower (around 400).  You must
  990. have one more SPX session than you have Named Pipes server and
  991. client sessions combined.
  992.  
  993. If you specify fewer SPX sessions than Named Pipes server sessions,
  994. NetWare Client for OS/2 will treat the SPX session number as the
  995. maximum number of Named Pipes server sessions.
  996.  
  997. Default  32 sessions.
  998. ENDUSAGE
  999. ENDTOPIC
  1000.  
  1001. STARTTOPIC NetWare NetBIOS
  1002. STARTUSAGE
  1003. NETWARE NETBIOS
  1004.     ABORT TIMEOUT number
  1005.     BIND board_number
  1006.     BROADCAST COUNT number
  1007.     BROADCAST DELAY number
  1008.     COMMANDS number
  1009.     INTERNET [ON|OFF]
  1010.     LISTEN TIMEOUT number
  1011.     NAMES number
  1012.     RETRY COUNT number
  1013.     RETRY DELAY number
  1014.     SESSIONS number
  1015.     VERIFY TIMEOUT number
  1016. ENDUSAGE
  1017. STARTDESCRIPTION
  1018. Use this option to manage Novell NetBIOS names and sessions or 
  1019. to allocate the internal memory for NetBIOS. 
  1020. ENDDESCRIPTION
  1021. ENDTOPIC
  1022.  
  1023. STARTTOPIC     abort timeout
  1024. STARTEXAMPLE
  1025. To make NetBIOS wait longer before terminating the session:
  1026.  
  1027. netware netbios
  1028.    abort timeout 40000
  1029. ENDEXAMPLE
  1030. STARTUSAGE
  1031. NETWARE NETBIOS
  1032.    ABORT TIMEOUT number
  1033.  
  1034. Replace "number" with a number of milliseconds greater than 500. 
  1035.  
  1036. Default = 30,000 milliseconds
  1037.  
  1038. If you change this setting, you must also change the "listen timeout" 
  1039. and "verify timeout" settings. The ratio between these three settings 
  1040. must remain the same. 
  1041.  
  1042. For example, if you double the "abort timeout" value, you must also 
  1043. double the "listen timeout" and "verify timeout" values. 
  1044. ENDUSAGE
  1045. STARTDESCRIPTION
  1046. Use this setting with "listen timeout" and "verify timeout" to 
  1047. monitor and control your NetBIOS connections.  
  1048.  
  1049. When NetBIOS sessions at a sending computer do not receive any 
  1050. transmissions from the receiving computer for the length of the 
  1051. "verify timeout" interval, NetBIOS sends a request-for-
  1052. acknowledgment packet to the receiving computer.  
  1053.  
  1054. NetBIOS then waits the length of the "listen timeout" interval to 
  1055. receive a response. If no response is received, NetBIOS sends 
  1056. another packet requesting immediate response. 
  1057.  
  1058. NetBIOS then waits the length of the "abort timeout" interval to 
  1059. receive a response. 
  1060. ENDDESCRIPTION
  1061. ENDTOPIC
  1062.  
  1063. STARTTOPIC     bind
  1064. STARTEXAMPLE
  1065. Configure NetBIOS as follows in order to use the logical board defined
  1066. by the NE2000 link driver and the Ethernet_802.3 frame type as the
  1067. NetBIOS primary network board:
  1068.  
  1069. link driver NE2
  1070.      frame ethernet_802.2     ; logical board 1
  1071.      frame ethernet_II        ; logical board 2
  1072.      protocol IPX   0    ethernet_802.2
  1073.      protocol  IP    800  ethernet_II
  1074.  
  1075. link driver NE2000
  1076.      frame ethernet_802.3     ; logical board 3
  1077.      protocol IPX   0    Ethernet_802.3
  1078.  
  1079. netware netbios
  1080.      bind 3
  1081. ENDEXAMPLE
  1082. STARTUSAGE
  1083. NETWARE NETBIOS
  1084.    BIND board_number
  1085.  
  1086. Replace "board_number" with the logical board number of a network
  1087. board. Board_number can be a value from 1 to 16.
  1088.  
  1089. Logical board numbers are assigned in ascending order
  1090. to each frame type as they appear in your configuration.
  1091. Note that logical board numbers are assigned to defaulted
  1092. frame types.
  1093.  
  1094. The board_number given must be the logical board number 
  1095. of a frame type used by IPX. (NOTE: You specify IPX usage of 
  1096. a frame type by using the protocol setting under the Link
  1097. Driver option.)
  1098.  
  1099. NetBIOS uses the IPX primary network board as its own primary
  1100. network board when this setting is not specified, or is out
  1101. of range, or if the board_number given does not match the
  1102. logical board number of a frame type in use by IPX.
  1103. ENDUSAGE
  1104. STARTDESCRIPTION
  1105. Use this setting to specify the primary NetBIOS network
  1106. board in your workstation. NetBIOS uses its primary
  1107. board to manage NetBIOS names. You can configure only
  1108. one primary NetBIOS network board.
  1109. ENDDESCRIPTION
  1110. ENDTOPIC
  1111.  
  1112. STARTTOPIC     broadcast count
  1113. STARTEXAMPLE
  1114. To broadcast more often:
  1115.  
  1116. netware netbios
  1117.    broadcast count 8
  1118. ENDEXAMPLE
  1119. STARTUSAGE
  1120. NETWARE NETBIOS
  1121.    BROADCAST COUNT number
  1122.  
  1123. Replace "number" with a number of queries greater than 1.  
  1124.  
  1125. Default with internet on: 4 times
  1126.  
  1127. Default with internet off: 2 times
  1128. ENDUSAGE
  1129. STARTDESCRIPTION
  1130. Use this setting to specify how many times NetBIOS broadcasts a 
  1131. query or claim for the name being used by an application.
  1132. ENDDESCRIPTION
  1133. ENDTOPIC
  1134.  
  1135. STARTTOPIC     broadcast delay
  1136. STARTEXAMPLE
  1137. To wait longer between broadcasts:
  1138.  
  1139. netware netbios
  1140.    broadcast delay 3000
  1141. ENDEXAMPLE
  1142. STARTUSAGE
  1143. NETWARE NETBIOS
  1144.    BROADCAST DELAY number
  1145.  
  1146. Replace "number" with a number of milliseconds greater than 100. 
  1147.  
  1148. Default with internet on: 2000
  1149. Default with internet off: 1000
  1150. ENDUSAGE
  1151. STARTDESCRIPTION
  1152. Use this setting to specify how long NetBIOS waits between 
  1153. query or claim broadcasts. 
  1154. ENDDESCRIPTION
  1155. ENDTOPIC
  1156.  
  1157. STARTTOPIC     commands
  1158. STARTEXAMPLE
  1159. To run an application that requires a large number of outstanding 
  1160. commands:
  1161.  
  1162. netware netbios
  1163.    commands 128
  1164. ENDEXAMPLE
  1165. STARTUSAGE
  1166. NETWARE NETBIOS
  1167.    COMMANDS number
  1168.  
  1169. Replace "number" with a number from 8 to 128.  
  1170.  
  1171. Default = 32 commands
  1172. ENDUSAGE
  1173. STARTDESCRIPTION
  1174. Use this setting to specify how many NetBIOS commands can 
  1175. be buffered in the NetBIOS driver at one time. 
  1176. ENDDESCRIPTION
  1177. ENDTOPIC
  1178.  
  1179. STARTTOPIC     internet
  1180. STARTEXAMPLE
  1181. To send and receive on the local network only:
  1182.  
  1183. netware netbios
  1184.    internet off
  1185. ENDEXAMPLE
  1186. STARTUSAGE
  1187. NETWARE NETBIOS
  1188.    INTERNET OFF
  1189.  
  1190. Type INTERNET followed by OFF. 
  1191.  
  1192. Default = ON
  1193. ENDUSAGE
  1194. STARTDESCRIPTION
  1195. Use this setting to transmit name-claim packets to and from 
  1196. all stations on the internetwork, or to and from stations on
  1197. the local network only.  
  1198.  
  1199. Name-claim packets are packets that try to establish the 
  1200. uniqueness of the name of the station on which NetBIOS is 
  1201. running. 
  1202. ENDDESCRIPTION
  1203. ENDTOPIC
  1204.  
  1205. STARTTOPIC     listen timeout
  1206. STARTEXAMPLE
  1207. To make NetBIOS wait longer before sending the packet 
  1208. requesting immediate response:
  1209.  
  1210. netware netbios
  1211.    listen timeout 8000
  1212. ENDEXAMPLE
  1213. STARTUSAGE
  1214. NETWARE NETBIOS
  1215.    LISTEN TIMEOUT number
  1216.  
  1217. Replace "number" with a number of milliseconds greater than 200.  
  1218. Default = 6000 milliseconds
  1219.  
  1220. If you change this setting, you must also change the "abort 
  1221. timeout" and "verify timeout" settings. The ratio between 
  1222. these three settings must remain the same. 
  1223.  
  1224. For example, if you double the "listen timeout" value, you must
  1225. also double the "abort timeout" and "verify timeout" values. 
  1226. ENDUSAGE
  1227. STARTDESCRIPTION
  1228. Use this setting with "abort timeout" and "verify timeout" to 
  1229. monitor and control your NetBIOS connections.  
  1230.  
  1231. When NetBIOS sessions at a sending computer do not receive any 
  1232. transmissions from the receiving computer for the length of the 
  1233. "verify timeout" interval, NetBIOS sends a request-for-
  1234. acknowledgment packet to the receiving computer.  
  1235.  
  1236. NetBIOS then waits the length of the "listen timeout" interval 
  1237. to receive a response. If no response is received, NetBIOS sends 
  1238. another packet requesting immediate response. 
  1239.  
  1240. NetBIOS then waits the length of the "abort timeout" interval 
  1241. to receive a response. 
  1242. ENDDESCRIPTION
  1243. ENDTOPIC
  1244.  
  1245. STARTTOPIC     names
  1246. STARTEXAMPLE
  1247. To allow 45 names:
  1248.  
  1249. netware netbios
  1250.    names 45
  1251. ENDEXAMPLE
  1252. STARTUSAGE
  1253. NETWARE NETBIOS
  1254.    NAMES number
  1255.  
  1256. Replace "number" with a number of names from 4 to 128. 
  1257. Default = 24 names
  1258. ENDUSAGE
  1259. STARTDESCRIPTION
  1260. Use this setting to specify how many names the workstation 
  1261. can have in its name table for remote stations. 
  1262.  
  1263. When you add a name to a station, the station broadcasts that 
  1264. name to all other nodes on the network. You can use a name 
  1265. instead of a node address to refer to remote stations. 
  1266. ENDDESCRIPTION
  1267. ENDTOPIC
  1268.  
  1269. STARTTOPIC     retry count
  1270. STARTEXAMPLE
  1271. To retransmit 50 times:
  1272.  
  1273. netware netbios
  1274.    retry count 50
  1275. ENDEXAMPLE
  1276. STARTUSAGE
  1277. NETWARE NETBIOS
  1278.    RETRY COUNT number
  1279.  
  1280. Replace "number" with a number greater than 0.  
  1281.  
  1282. Default = 20 retries
  1283. ENDUSAGE
  1284. STARTDESCRIPTION
  1285. Use this setting to specify how many times NetBIOS transmits a 
  1286. request for connection or retransmits a failed connection. 
  1287. ENDDESCRIPTION
  1288. ENDTOPIC
  1289.  
  1290. STARTTOPIC     retry delay
  1291. STARTEXAMPLE
  1292. To wait 800 milliseconds between retransmission attempts:
  1293.  
  1294. netware netbios
  1295.    retry delay 800
  1296. ENDEXAMPLE
  1297. STARTUSAGE
  1298. NETWARE NETBIOS
  1299.    RETRY DELAY number
  1300.  
  1301. Replace "number" with a number of milliseconds greater than 0.  
  1302. Default = 500 milliseconds
  1303. ENDUSAGE
  1304. STARTDESCRIPTION
  1305. Use this setting to specify how many milliseconds NetBIOS waits 
  1306. between transmissions while establishing a connection or resending
  1307. a data packet.
  1308. ENDDESCRIPTION
  1309. ENDTOPIC
  1310.  
  1311. STARTTOPIC     sessions
  1312. STARTEXAMPLE
  1313. To allow 50 NetBIOS sessions:
  1314.  
  1315. netware netbios
  1316.    sessions 50
  1317. ENDEXAMPLE
  1318. STARTUSAGE
  1319. NETWARE NETBIOS
  1320.    SESSIONS number
  1321.  
  1322. Replace "number" with a number of sessions from 4 to 64.
  1323. Default = 16 sessions 
  1324. ENDUSAGE
  1325. STARTDESCRIPTION
  1326. Use this setting to specify how many simultaneous NetBIOS sessions 
  1327. the NetBIOS driver can support. 
  1328. ENDDESCRIPTION
  1329. ENDTOPIC
  1330.  
  1331. STARTTOPIC     verify timeout
  1332. STARTEXAMPLE
  1333. To make NetBIOS wait longer before sending a request-
  1334. for-acknowledgment packet:
  1335.  
  1336. netware netbios
  1337.    verify timeout 4000
  1338. ENDEXAMPLE
  1339. STARTUSAGE
  1340. NETWARE NETBIOS
  1341.    VERIFY TIMEOUT number
  1342.  
  1343. Replace "number" with a number of milliseconds greater than 100.  
  1344.  
  1345. Default = 3000 milliseconds
  1346.  
  1347. If you change this setting, you must also change the "abort 
  1348. timeout" and "listen timeout" settings. The ratio between 
  1349. these three settings must remain the same. 
  1350.  
  1351. For example, if you double the "verify timeout" value, you must
  1352. also double the "abort timeout" and "listen timeout" values. 
  1353. ENDUSAGE
  1354. STARTDESCRIPTION
  1355. Use this setting with "abort timeout" and "listen timeout" to 
  1356. monitor and control your NetBIOS connections.  
  1357.  
  1358. When NetBIOS sessions at a sending computer do not receive any 
  1359. transmissions from the receiving computer for the length of the 
  1360. "verify timeout" interval, NetBIOS sends a request-
  1361. for-acknowledgment packet to the receiving computer.  
  1362.  
  1363. NetBIOS then waits the length of the "listen timeout" interval 
  1364. to receive a response. If no response is received, NetBIOS sends 
  1365. another packet requesting immediate response. 
  1366.  
  1367. NetBIOS then waits the length of the "abort timeout" interval 
  1368. to receive a response. 
  1369. ENDDESCRIPTION
  1370. ENDTOPIC
  1371.  
  1372. STARTTOPIC NetWare Requester
  1373. STARTUSAGE
  1374. NETWARE REQUESTER
  1375.     CACHE BUFFERS number    
  1376.     DEFAULT LOGIN DRIVE  drive_letter
  1377.     DISPLAY HARD ERRORS [ON|OFF]
  1378.     LARGE INTERNET PACKETS [ON|OFF]
  1379.     NAME CONTEXT "context"
  1380.     PACKET BURST [ON|OFF]
  1381.     PREFERRED SERVER servername
  1382.     PREFERRED TREE treename
  1383.     REQUEST RETRIES number
  1384.     SESSIONS number
  1385.     SIGNATURE LEVEL number
  1386. ENDUSAGE
  1387. STARTDESCRIPTION
  1388. Use this option to control network requests from your workstation 
  1389. to a NetWare server.
  1390. ENDDESCRIPTION
  1391. ENDTOPIC
  1392.  
  1393. STARTTOPIC     cache buffers
  1394. STARTEXAMPLE
  1395. To allow 15 cache buffers:
  1396.  
  1397. netware requester
  1398.    cache buffers 15
  1399. ENDEXAMPLE
  1400. STARTUSAGE
  1401. NETWARE REQUESTER
  1402.    CACHE BUFFERS number
  1403.  
  1404. Replace "number" with a number from 0 to 30.
  1405.  
  1406. Default = 8 buffers.
  1407.  
  1408. To turn off caching, specify 0. 
  1409.  
  1410. NetWare Client for OS/2 uses the maximum buffer size permitted 
  1411. by each server to which NetWare Client for OS/2 is connected. 
  1412. However, NetWare Client for OS/2 cannot use more than 64 KB of 
  1413. total memory for cache buffers. If the buffer size is large, you might
  1414. not be allowed as many buffers as you specify. 
  1415. ENDUSAGE
  1416. STARTDESCRIPTION
  1417. Use this setting to specify how many buffers NetWare Client for OS/2 
  1418. can use to cache data from open files. 
  1419.  
  1420. Cache buffers minimize read and write traffic on the network. 
  1421. The more buffers, the faster NetWare Client for OS/2 performs; however, more buffers use more memory. 
  1422. ENDDESCRIPTION
  1423. ENDTOPIC
  1424.  
  1425. STARTTOPIC     default login drive 
  1426. STARTEXAMPLE
  1427. To change the default login drive to drive F:
  1428.  
  1429. netware requester
  1430.    default login drive f
  1431. ENDEXAMPLE
  1432. STARTUSAGE
  1433. NETWARE REQUESTER
  1434.    DEFAULT LOGIN DRIVE drive letter
  1435.  
  1436. Replace "drive letter" with the drive letter you wish to be the default
  1437. login drive.
  1438.  
  1439. Default = Drive L:
  1440. ENDUSAGE
  1441. STARTDESCRIPTION
  1442. Use this setting if you want NetWare Client for OS/2 to map a drive
  1443. other than L: (the default) to the SYS:LOGIN directory on the file server.
  1444. You might need this if you have more than 12 local drives or if you
  1445. have an application that needs drive L: mapped to someplace else.
  1446. ENDDESCRIPTION
  1447. ENDTOPIC
  1448.  
  1449. STARTTOPIC     display hard errors
  1450. STARTEXAMPLE
  1451. To prevent error messages from displaying:
  1452.  
  1453. netware requester
  1454.    display hard errors off
  1455. ENDEXAMPLE
  1456. STARTUSAGE
  1457. NETWARE REQUESTER
  1458.     DISPLAY HARD ERRORS OFF
  1459.  
  1460. Type DISPLAY HARD ERRORS OFF to keep error messages from
  1461. displaying.  
  1462.  
  1463. To display error messages, leave this line out of your NET.CFG. 
  1464.  
  1465. Default =  Error messages are displayed. 
  1466.  
  1467. This option is useful for production sites with unattended workstations.
  1468. Be careful about using it in other environments. Hard error messages 
  1469. might be important, because the situation that causes the message often
  1470. causes applications to fail. 
  1471. ENDUSAGE
  1472. STARTDESCRIPTION
  1473. Use this option to keep programs running when a hard error is displayed. 
  1474.  
  1475. With this option set, hard errors are returned automatically to the program that caused them rather than displayed to you for further
  1476. interaction. 
  1477.  
  1478. Hard errors display on a full screen (usually black and white) and 
  1479. prompt you to choose among several actions. Background processes
  1480. suspend until you respond to the message.
  1481. ENDDESCRIPTION
  1482. ENDTOPIC
  1483.  
  1484. STARTTOPIC     large internet packets off
  1485. STARTEXAMPLE
  1486. To disable large packet transmission:
  1487.  
  1488. netware requester
  1489.    large internet packets off
  1490. ENDEXAMPLE
  1491. STARTUSAGE
  1492. NETWARE REQUESTER
  1493.    LARGE INTERNET PACKETS OFF
  1494.  
  1495. To turn off large packet transmissions, type LARGE INTERNET
  1496. PACKETS OFF.
  1497.  
  1498. Default = large internet packets are transmitted
  1499. ENDUSAGE
  1500. STARTDESCRIPTION
  1501. Use this setting to disable large internet packet transmission. 
  1502.  
  1503. For more information on large internet packets, see the NetWare
  1504. Client for OS/2 manual. 
  1505. ENDDESCRIPTION
  1506. ENDTOPIC
  1507.  
  1508. STARTTOPIC     name context
  1509. STARTEXAMPLE
  1510. To specify a name context:
  1511.  
  1512. netware requester
  1513.    name context "john.sales.novell us"
  1514. ENDEXAMPLE
  1515. STARTUSAGE
  1516. NETWARE REQUESTER
  1517.    NAME CONTEXT "context"
  1518.  
  1519. Replace "context" with your name context in the NetWare 4 
  1520. Directory tree. Enclose the context in quotes. Do not use a 
  1521. dot as the first character of your context. 
  1522.  
  1523. Default = Root of the Directory tree.
  1524. ENDUSAGE
  1525. STARTDESCRIPTION
  1526. Use this setting to specify a name context. If you do not specify
  1527. a context in your NET.CFG, you will have to type a context on
  1528. the command line when you type "LOGIN".
  1529.  
  1530. The LOGIN utility uses this context to search for your user object
  1531. and connect you to the network. If a context is not specified,
  1532. LOGIN will search for your user object from the root of the tree.
  1533. If more than one user object exists with the same name, LOGIN
  1534. might not locate the correct user object without a context
  1535. statement. 
  1536. ENDDESCRIPTION
  1537. ENDTOPIC
  1538.  
  1539.  
  1540. STARTTOPIC     packet burst off
  1541. STARTEXAMPLE
  1542. To disable Packet Burst transmissions:
  1543.  
  1544. netware requester
  1545.    packet burst off
  1546. ENDEXAMPLE
  1547. STARTUSAGE
  1548. NETWARE REQUESTER
  1549.    PACKET BURST OFF
  1550.  
  1551. Type PACKET BURST OFF to turn off Packet Burst
  1552. transmissions.
  1553.  
  1554. Default = On (Packet Burst transmissions occur)
  1555. ENDUSAGE
  1556. STARTDESCRIPTION
  1557. Use this setting to disable Packet Burst transmissions. 
  1558.  
  1559. For more information on Packet Burst, see the NetWare Client
  1560. for OS/2 manual. 
  1561. ENDDESCRIPTION
  1562. ENDTOPIC
  1563.  
  1564. STARTTOPIC     preferred server
  1565. STARTEXAMPLE
  1566. To attach to server FINANCE:
  1567.  
  1568. netware requester
  1569.    preferred server finance
  1570. ENDEXAMPLE
  1571. STARTUSAGE
  1572. NETWARE REQUESTER
  1573.    PREFERRED SERVER servername
  1574.  
  1575. Replace "servername" with the name of a NetWare server. The
  1576. syntax of this option has changed - you must now type the word
  1577. "server" as well as your server name.
  1578.  
  1579. Default = None
  1580. ENDUSAGE
  1581. STARTDESCRIPTION
  1582. Use this setting to specify which NetWare server you want your 
  1583. workstation to attach to when it first accesses the network.
  1584.  
  1585. If you also have a "preferred tree" option set, NetWare Client
  1586. for OS/2 first tries to attach to the preferred tree and then
  1587. searches for the preferred server. If you are connecting only to
  1588. NetWare 3 or NetWare 2 servers, use this option instead of
  1589. "preferred tree."
  1590. ENDDESCRIPTION
  1591. ENDTOPIC
  1592.  
  1593. STARTTOPIC     preferred tree
  1594. STARTEXAMPLE
  1595. To attach to a tree named NOVELL:
  1596.  
  1597. netware requester
  1598.    preferred tree novell
  1599. ENDEXAMPLE
  1600. STARTUSAGE
  1601. NETWARE REQUESTER
  1602.    PREFERRED TREE treename
  1603.  
  1604. Replace "treename" with the name of your tree. Tree names can
  1605. have up to 32 characters. Specify the tree where your name
  1606. context is set.
  1607.  
  1608. Default = Root of the directory
  1609. ENDUSAGE
  1610. STARTDESCRIPTION
  1611. Use this setting to specify which NetWare tree you want your 
  1612. workstation to attach to when it first accesses the network.
  1613.  
  1614. This setting is only for sites that have more than one directory
  1615. tree. If you also have "preferred server" in your NET.CFG, 
  1616. NetWare Client for OS/2 first searches for a preferred tree,
  1617. and then for a preferred server in that tree. 
  1618.  
  1619. If you are connecting only to NetWare 3 or NetWare 2 servers,
  1620. use the "preferred server" setting instead of "preferred tree."
  1621. ENDDESCRIPTION
  1622. ENDTOPIC
  1623.  
  1624. STARTTOPIC     request retries
  1625. STARTEXAMPLE
  1626. To decrease the number of times NetWare Client for OS/2 tries
  1627. to resend:
  1628.  
  1629. netware requester
  1630.    request retries 10
  1631. ENDEXAMPLE
  1632. STARTUSAGE
  1633. NETWARE REQUESTER
  1634.    REQUEST RETRIES number
  1635.  
  1636. Replace "number" with a number greater than 5.
  1637.  
  1638. Default = 20 retries
  1639.  
  1640. Decrease this default if you are connected to the network over a 
  1641. modem and you do not want to waste phone time while NetWare
  1642. Client for OS/2 tries to resend packets. 
  1643. ENDUSAGE
  1644. STARTDESCRIPTION
  1645. Use this setting to specify how many times NetWare Client for
  1646. OS/2 tries to resend a request following a communication error. 
  1647. ENDDESCRIPTION
  1648. ENDTOPIC
  1649.  
  1650. STARTTOPIC     sessions
  1651. STARTEXAMPLE
  1652. To increase the number of server connections:
  1653.  
  1654. netware requester
  1655.    sessions 20
  1656.    
  1657. If you increase this setting, you must also increase the "Protocol
  1658. Stack IPX sockets" setting. 
  1659. ENDEXAMPLE
  1660. STARTUSAGE
  1661. NETWARE REQUESTER
  1662.    SESSIONS number
  1663.  
  1664. Replace "number" with a number from 8 to 32.
  1665.  
  1666. Default = 8 sessions
  1667.  
  1668. You must have at least 3 IPX sockets for each session you allow.  
  1669. See the "Protocol Stack IPX sockets" setting. 
  1670. ENDUSAGE
  1671. STARTDESCRIPTION
  1672. Use this setting to specify the number of connections NetWare Client
  1673. for OS/2 can have to all servers. 
  1674. ENDDESCRIPTION
  1675. ENDTOPIC
  1676.  
  1677. STARTTOPIC     signature level
  1678. STARTEXAMPLE
  1679. To prevent the workstation from signing packets:
  1680.  
  1681. netware requester
  1682.    signature level 0
  1683. ENDEXAMPLE
  1684. STARTUSAGE
  1685. NETWARE REQUESTER
  1686.    SIGNATURE LEVEL number
  1687.  
  1688. Replace "number" with 0, 1, 2, or 3
  1689. (0=least secure; 3=most secure)
  1690.  
  1691. Default = 1
  1692.  
  1693. 0     Workstation does not sign packets (LEAST SECURE).
  1694.  
  1695. 1     Workstation signs packets only if the server 
  1696.       requests it (server option is 2 or higher).
  1697.  
  1698. 2     Workstation signs packets if the server is
  1699.       capable of signing (server option is 1 or higher).
  1700.  
  1701. 3     Workstation signs packets and requires the server
  1702.       to sign packets or login will fail (MOST SECURE).
  1703. ENDUSAGE
  1704. STARTDESCRIPTION
  1705. Use this setting to assign a signature level. Signature levels
  1706. help determine security on the network. 
  1707.  
  1708. For more information about signature levels and security, see
  1709. the NetWare Client for OS/2 manual. 
  1710. ENDDESCRIPTION
  1711. ENDTOPIC
  1712.  
  1713. STARTTOPIC Protocol ODINSUP
  1714. STARTUSAGE
  1715. PROTOCOL ODINSUP
  1716.    BIND driver [number]
  1717. ENDUSAGE
  1718. STARTDESCRIPTION
  1719. Use this option to allow the NDIS protocol stack used with Extended 
  1720. Services and LAN Services to send packets on the network using 
  1721. ODI Token-Ring or Ethernet drivers. 
  1722.  
  1723. See the NetWare Client for OS/2 manual before using this option.
  1724. ENDDESCRIPTION
  1725. ENDTOPIC
  1726.  
  1727. STARTTOPIC     bind
  1728. STARTEXAMPLE
  1729. To bind ODINSUP to a single NE2000 board in your workstation:
  1730.  
  1731. protocol odinsup
  1732.     bind ne2000
  1733.  
  1734.  
  1735. To bind ODINSUP to both the first and second NE2000 boards in 
  1736. your workstation:
  1737.  
  1738. protocol odinsup
  1739.    bind ne2000
  1740.    bind ne2000 2
  1741. ENDEXAMPLE
  1742. STARTUSAGE
  1743. PROTOCOL ODINSUP
  1744.    BIND driver [number]
  1745.  
  1746. Replace "driver" with a Token-Ring or Ethernet ODI 
  1747. driver name. ODINSUP can be bound to a maximum of 
  1748. four ODI drivers.  
  1749.  
  1750. Default = The first Ethernet or Token-Ring board ODINSUP
  1751. locates
  1752.  
  1753. Include a separate bind setting under the "Protocol ODINSUP" 
  1754. line for every NDIS MAC driver used by Extended Services or 
  1755. LAN Services before you installed NetWare Client for OS/2.
  1756.  
  1757. (Optional) Replace "number" with a number from 1 to 4. 
  1758.  
  1759. Default = 1
  1760.  
  1761. This value binds ODINSUP to a particular occurrence of a board
  1762. when you have two boards with the same name. For example, if 
  1763. you have two NE2000 network boards in your workstation, bind 
  1764. ODINSUP to each board by typing a "2" for the second board. 
  1765. ENDUSAGE
  1766. STARTDESCRIPTION
  1767. Use this setting to bind the ODINSUP protocol to an ODI driver. 
  1768. When ODINSUP is bound to a driver, the network board for that 
  1769. driver is the board used for transmissions to and from the 
  1770. network. 
  1771. ENDDESCRIPTION
  1772. ENDTOPIC
  1773.  
  1774. STARTTOPIC Protocol Stack IPX
  1775. STARTUSAGE
  1776. PROTOCOL STACK IPX
  1777.    BIND name
  1778.    ROUTER MEM size
  1779.    SOCKETS number
  1780. ENDUSAGE
  1781. STARTDESCRIPTION
  1782. Use this option to adjust IPX communication between applications 
  1783. and the ODI drivers in your workstation. 
  1784.  
  1785. Unless you have a unique and complex network setup, 
  1786. you will probably never need to use this option. The defaults 
  1787. have already been set to produce maximum performance in almost 
  1788. all cases. 
  1789. ENDDESCRIPTION
  1790. ENDTOPIC
  1791.  
  1792. STARTTOPIC     bind
  1793. STARTEXAMPLE
  1794. To specify a 3Com 3C503 board as primary:
  1795.  
  1796. protocol stack ipx
  1797.    bind 3c503
  1798. ENDEXAMPLE
  1799. STARTUSAGE
  1800. PROTOCOL STACK IPX
  1801.    BIND name
  1802.  
  1803. Replace "name" with the driver name for your network board. 
  1804. Default = The first ODI driver listed in the CONFIG.SYS file. 
  1805. Some common names follow:
  1806.  
  1807. NE2 for Novell Ethernet NE/2
  1808. NE2_32 for Novell Ethernet NE/2-32
  1809.  
  1810. NE1000 for Novell Ethernet NE1000
  1811. NE2000 for Novell Ethernet NE2000
  1812. NE2100 for Novell Ethernet NE2100
  1813.  
  1814. TOKEN for IBM Token-Ring PC board
  1815.  
  1816. LANSUP for boards using NDIS drivers
  1817.  
  1818. ODINSUP for IBM Token-Ring and Ethernet Com. Manager board
  1819.  
  1820. 3C501 for 3Com EtherLink series 501
  1821. 3C503 for 3Com EtherLink series 503
  1822. 3C505 for 3Com EtherLink series 505
  1823. 3C523 for 3Com EtherLink/MC series 523
  1824.  
  1825. PCN2 for IBM PC Network board II and II/A (older Novell 
  1826.   frame format)
  1827. PCN2L for IBM PC Network board II and II/A (newer Novell 
  1828.   frame format)
  1829. ENDUSAGE
  1830. STARTDESCRIPTION
  1831. Use this setting to specify which network board is the primary 
  1832. board in your workstation.  
  1833.  
  1834. By default, the primary board is the board whose driver loads 
  1835. first in the CONFIG.SYS. If you specify a different board with 
  1836. this setting, that default is changed. 
  1837.  
  1838. Use this setting only if you have multiple boards in your 
  1839. workstation. For more information about multiple boards, see 
  1840. the NetWare Client for OS/2 manual.
  1841. ENDDESCRIPTION
  1842. ENDTOPIC
  1843.  
  1844. STARTTOPIC     router mem
  1845. STARTEXAMPLE
  1846. To increase the default:
  1847.  
  1848. protocol stack ipx 
  1849.    router mem 500
  1850. ENDEXAMPLE
  1851. STARTUSAGE
  1852. NETWARE REQUESTER
  1853.    ROUTER MEM size
  1854.  
  1855. Replace "size" with a number of bytes.  
  1856.  
  1857. Default = 450 bytes
  1858.  
  1859. This default accommodates up to 15 network boards, so you should
  1860. not need to increase it. 
  1861. ENDUSAGE
  1862. STARTDESCRIPTION
  1863. Use this setting to specify how many bytes in the router
  1864. memory pool are allocated for routing requests to the network. 
  1865. ENDDESCRIPTION
  1866. ENDTOPIC
  1867.  
  1868. STARTTOPIC     sockets
  1869. STARTEXAMPLE
  1870. To increase the socket limit for a workstation connected to 
  1871. several servers and running Named Pipes and applications that 
  1872. require sockets:
  1873.  
  1874. protocol stack ipx
  1875.    sockets 128
  1876. ENDEXAMPLE
  1877. STARTUSAGE
  1878. PROTOCOL STACK IPX
  1879.    SOCKETS number
  1880.  
  1881. Replace "number" with a number of sockets between 9 and 128. 
  1882. If you are running IPX with NetWare Client for OS/2, do not set this value below 32.  
  1883.  
  1884. Default = 64 sockets
  1885.  
  1886. You need 3 sockets per server connection. The default 
  1887. works for the default number of server connections (see the 
  1888. "NetWare Requester sessions" setting). 
  1889.  
  1890. Allow more sockets if your workstation connects to many different 
  1891. servers or runs protocols (such as Named Pipes) that require sockets. 
  1892. ENDUSAGE
  1893. STARTDESCRIPTION
  1894. Use this setting to specify how many sockets IPX can open 
  1895. at your workstation.
  1896. ENDDESCRIPTION
  1897. ENDTOPIC
  1898.  
  1899. STARTTOPIC Protocol Stack SPX
  1900. STARTUSAGE
  1901. PROTOCOL STACK SPX
  1902.     ABORT TIMEOUT number
  1903.     LISTEN TIMEOUT number
  1904.     RETRY COUNT number
  1905.     SEND TIMEOUT number
  1906.     SESSIONS number
  1907.     VERIFY TIMEOUT number
  1908. ENDUSAGE
  1909. STARTDESCRIPTION
  1910. Use this option to adjust the number and characteristics of 
  1911. SPX connections between your workstation and other computers. 
  1912. ENDDESCRIPTION
  1913. ENDTOPIC
  1914.  
  1915. STARTTOPIC     abort timeout
  1916. STARTEXAMPLE
  1917. To make SPX wait longer before terminating the session:
  1918.  
  1919. protocol stack spx
  1920.    abort timeout 40000
  1921. ENDEXAMPLE
  1922. STARTUSAGE
  1923. PROTOCOL STACK SPX
  1924.    ABORT TIMEOUT number
  1925.  
  1926. Replace "number" with a number of milliseconds from 10 to 
  1927. 65,535. The "abort timeout" value must be 10 times greater 
  1928. than the "verify timeout" value.  
  1929.  
  1930. Default = 30000 milliseconds 
  1931.  
  1932. NOTE: If you change the "abort timeout" value, you must also 
  1933. change the "listen timeout" and "verify timeout" values.  
  1934. The ratio between these three settings must be maintained.  
  1935.  
  1936. On a Named Pipes server, double all three values. 
  1937. ENDUSAGE
  1938. STARTDESCRIPTION
  1939. Use this setting with "listen timeout" and "verify timeout" to 
  1940. monitor and control SPX connections. 
  1941.  
  1942. When SPX sessions at a sending computer do not receive 
  1943. transmissions from the receiving computer for the length of the 
  1944. "verify timeout" interval, SPX sends a keep-connection-alive 
  1945. packet to the receiving computer. 
  1946.  
  1947. SPX then waits the length of the "listen timeout" interval 
  1948. to receive a response. If no response is received, SPX sends 
  1949. another packet requesting immediate acknowledgment. 
  1950.  
  1951. SPX then waits the length of the "abort timeout" interval 
  1952. to receive a response. If no response is received, SPX 
  1953. terminates the session. 
  1954. ENDDESCRIPTION
  1955. ENDTOPIC
  1956.  
  1957. STARTTOPIC     listen timeout
  1958. STARTEXAMPLE
  1959. To make SPX wait longer before sending the packet requesting 
  1960. immediate response:
  1961.  
  1962. protocol stack spx
  1963.    listen timeout 8000
  1964. ENDEXAMPLE
  1965. STARTUSAGE
  1966. PROTOCOL STACK SPX
  1967.    LISTEN TIMEOUT number
  1968.  
  1969. Replace "number" with a number of milliseconds from 10 to 
  1970. 65,535. The "listen timeout" value must be double the 
  1971. "verify timeout" value.
  1972.  
  1973. Default = 6000 milliseconds
  1974.  
  1975. NOTE: If you change the "listen timeout" value, you must 
  1976. also change the "abort timeout" and "verify timeout" values.  
  1977. The ratio between these three settings must be maintained.  
  1978.  
  1979. On a Named Pipes server, double all three values.
  1980. ENDUSAGE
  1981. STARTDESCRIPTION
  1982. Use this setting with "abort timeout" and "verify timeout" 
  1983. to monitor and control SPX connections. 
  1984.  
  1985. When SPX sessions at a sending computer do not receive 
  1986. transmissions from the receiving computer for the length of the 
  1987. "verify timeout" interval, SPX sends a keep-connection-alive 
  1988. packet to the receiving computer. 
  1989.  
  1990. SPX then waits the length of the "listen timeout" interval to 
  1991. receive a response. If no response is received, SPX sends 
  1992. another packet requesting immediate acknowledgment. 
  1993.  
  1994. SPX then waits the length of the "abort timeout" interval to 
  1995. receive a response. If no response is received, SPX terminates 
  1996. the session. 
  1997. ENDDESCRIPTION
  1998. ENDTOPIC
  1999.  
  2000. STARTTOPIC     verify timeout
  2001. STARTEXAMPLE
  2002. To make SPX wait longer before sending a keep-connection-
  2003. alive packet:
  2004.  
  2005. protocol stack spx
  2006.    abort timeout 4000
  2007. ENDEXAMPLE
  2008. STARTUSAGE
  2009. PROTOCOL STACK SPX
  2010.    VERIFY TIMEOUT number
  2011.  
  2012. Replace "number" with a number of milliseconds from 10 to 
  2013. 65,535. The "verify timeout" value must be 10 times less 
  2014. than the "abort timeout" value and half of the "listen 
  2015. timeout" value.
  2016.  
  2017. Default = 3000 milliseconds 
  2018.  
  2019. NOTE: If you change the "verify timeout" value, you must also 
  2020. change the "abort timeout" and "listen timeout" values. The 
  2021. ratio between these three settings must be maintained.  
  2022.  
  2023. On a Named Pipes server, double all three values.
  2024. ENDUSAGE
  2025. STARTDESCRIPTION
  2026. Use this setting with "abort timeout" and "listen timeout"
  2027. to monitor and control SPX connections. 
  2028.  
  2029. When SPX sessions at a sending computer do not receive 
  2030. transmissions from the receiving computer for the length of 
  2031. the "verify timeout" interval, SPX sends a 
  2032. keep-connection-alive packet to the receiving computer. 
  2033.  
  2034. SPX then waits the length of the "listen timeout" interval 
  2035. to receive a response. If no response is received, SPX sends 
  2036. another packet requesting immediate acknowledgment. 
  2037.  
  2038. SPX then waits the length of the "abort timeout" interval to 
  2039. receive a response. If no response is received, SPX terminates 
  2040. the session. 
  2041. ENDDESCRIPTION
  2042. ENDTOPIC
  2043.  
  2044. STARTTOPIC     retry count
  2045. STARTEXAMPLE
  2046. To increase the number of times SPX packets are resent:
  2047.  
  2048. protocol stack spx
  2049.    retry count 30
  2050. ENDEXAMPLE
  2051. STARTUSAGE
  2052. PROTOCOL STACK SPX
  2053.    RETRY COUNT number
  2054.  
  2055. Replace "number" with a number of retries from 1 to 255. 
  2056.  
  2057. Default = 20 retries
  2058.  
  2059. If your network traffic is heavy or if you are transmitting 
  2060. across routers, you might want to increase the default. 
  2061.  
  2062. NOTE: Some applications set the RETRY COUNT value.  
  2063. In these cases, the application-set value is used and the 
  2064. NET.CFG value is ignored. 
  2065. ENDUSAGE
  2066. STARTDESCRIPTION
  2067. Use this setting to specify the number of times your 
  2068. workstation will resend packets that weren't acknowledged 
  2069. by the receiving computer the first time they were sent. 
  2070. ENDDESCRIPTION
  2071. ENDTOPIC
  2072.  
  2073. STARTTOPIC     send timeout
  2074. STARTEXAMPLE
  2075. To increase the wait between attempts to resend an SPX packet:
  2076.  
  2077. protocol stack spx
  2078.    send timeout 5600
  2079. ENDEXAMPLE
  2080. STARTUSAGE
  2081. PROTOCOL STACK SPX
  2082.    SEND TIMEOUT number
  2083.  
  2084. Replace "number" with a number of milliseconds from 500 
  2085. to 65,535.
  2086.  
  2087. Default = A continually calculated value based on the time it takes
  2088. SPX to get a response from the server. 
  2089.  
  2090. The default works well in almost all cases. Increase the 
  2091. default if you are using network management products 
  2092. with a very large network and you encounter many SPX 
  2093. connection errors. 
  2094.  
  2095. You might also want to increase the default for a Named 
  2096. Pipes client that is operating faster than the Named Pipes
  2097. server it is connected to. 
  2098. ENDUSAGE
  2099. STARTDESCRIPTION
  2100. Use this setting to specify how long SPX waits between 
  2101. attempts to send packets across the network.  
  2102. ENDDESCRIPTION
  2103. ENDTOPIC
  2104.  
  2105. STARTTOPIC     sessions
  2106. STARTEXAMPLE
  2107. To increase the number of SPX sessions:
  2108.  
  2109. protocol stack spx
  2110.    sessions 64
  2111. ENDEXAMPLE
  2112. STARTUSAGE
  2113. PROTOCOL STACK SPX
  2114.    SESSIONS number
  2115.  
  2116. Replace "number" with a number greater than 8. 1,000 is
  2117. the practical upper limit.   
  2118.  
  2119. Default = 16 sessions 
  2120.  
  2121. If you run Named Pipes applications or other applications
  2122. that use SPX, you might need to increase the default number
  2123. of sessions. 
  2124. ENDUSAGE
  2125. STARTDESCRIPTION
  2126. Use this setting to specify how many SPX connections can be 
  2127. open simultaneously. 
  2128. ENDDESCRIPTION
  2129. ENDTOPIC
  2130.  
  2131. STARTTOPIC NetWare for OS/2
  2132. STARTUSAGE
  2133. NETWARE FOR OS/2
  2134.     PERFORMANCE TUNING number
  2135.     REMOVE SERVER MEMORY
  2136.     SERVER MEMORY number
  2137. ENDUSAGE
  2138. STARTDESCRIPTION
  2139. Use this option to set memory and performance features for 
  2140. NetWare for OS/2.
  2141. ENDDESCRIPTION
  2142. ENDTOPIC
  2143.  
  2144. STARTTOPIC     performance tuning
  2145. STARTEXAMPLE
  2146. To allow NetWare for OS/2 and OS/2 2.x to run with 
  2147. approximately equal performance:
  2148.  
  2149. netware for os/2
  2150.    performance tuning 5
  2151. ENDEXAMPLE
  2152. STARTUSAGE
  2153. NETWARE FOR OS/2
  2154.    PERFORMANCE TUNING number
  2155.  
  2156. Replace "number" with a number from 1 to 10.
  2157.  
  2158. Default = 9 
  2159.  
  2160. The higher the number, the more processing time allocated to
  2161. NetWare for OS/2 and the faster your NetWare server will run.
  2162. ENDUSAGE
  2163. STARTDESCRIPTION
  2164. Use this setting to specify how much processing time is allocated
  2165. to NetWare for OS/2. Whatever is not allocated to NetWare is left
  2166. for OS/2 2.x.
  2167. ENDDESCRIPTION
  2168. ENDTOPIC
  2169.  
  2170. STARTTOPIC     remove server memory
  2171. STARTEXAMPLE
  2172. To release server memory upon bringing down the server:
  2173.  
  2174. netware for os/2
  2175.    remove server memory
  2176. ENDEXAMPLE
  2177. STARTUSAGE
  2178. NETWARE FOR OS/2
  2179.    REMOVE SERVER MEMORY
  2180.  
  2181. Default = Server memory is not released when you bring down
  2182. the server.
  2183. ENDUSAGE
  2184. STARTDESCRIPTION
  2185. Use this setting to tell the NetWare server to release the memory
  2186. allocated to it. The memory is released when the NetWare server is 
  2187. brought down.
  2188. ENDDESCRIPTION
  2189. ENDTOPIC
  2190.  
  2191. STARTTOPIC     server memory
  2192. STARTEXAMPLE
  2193. To allocate 10 MB of memory for the NetWare for OS/2 server:
  2194.  
  2195. netware for os/2 
  2196.    server memory 10
  2197.  
  2198. To allocate 12.5 MB of memory for the NetWare for OS/2 server:
  2199.  
  2200. netware for os/2 
  2201.    server memory 12.5
  2202. ENDEXAMPLE
  2203. STARTUSAGE
  2204. NETWARE FOR OS/2
  2205.    SERVER MEMORY number
  2206.  
  2207. Replace "number" with a number of megabytes.
  2208.  
  2209. Default = 6
  2210. Be sure the number you specify is large enough to run the server,
  2211. but small enough to leave adequate memory for OS/2.
  2212.  
  2213. If NetWare cannot allocate the amount of memory you specify, 
  2214. it displays a warning message and then uses the highest amount it
  2215. can obtain.
  2216. ENDUSAGE
  2217. STARTDESCRIPTION
  2218. Use this setting to allocate memory for the server at boot time
  2219. when the PNETWARE.SYS driver initializes. 
  2220. ENDDESCRIPTION
  2221. ENDTOPIC
  2222.  
  2223. STARTTOPIC Token-Ring Source Routing
  2224. STARTUSAGE
  2225. PROTOCOL ROUTE
  2226.     SOURCE ROUTE [DEF] [GBR] [MBR] NODES n BOARD n
  2227. ENDUSAGE
  2228. STARTDESCRIPTION
  2229. Use this option to configure NetWare Client for OS/2 for Source 
  2230. Routing between Token-Ring networks that are connected
  2231. with source-routers. 
  2232.  
  2233. Do not use this option if your Token-Ring networks do not 
  2234. use Source Routing. Any workstation on the same ring as a 
  2235. Token-Ring source router must use the Token-Ring source-route 
  2236. driver when communicating over the router. 
  2237.  
  2238. For more information about installing Source Routing, see 
  2239. the NetWare Client for OS/2 manual or choose the Description
  2240. button again.
  2241. ENDDESCRIPTION
  2242. STARTDESCRIPTION
  2243. For Source Routing to work, it must be installed on each workstation.
  2244. Type the following line in each CONFIG.SYS file, replacing "drive" with
  2245. the letter of your boot drive:
  2246.  
  2247. DEVICE=drive:\NETWARE\ROUTE.SYS
  2248.  
  2249. NOTE: If you installed NetWare Client for OS/2 files in a location
  2250. other than \NETWARE, use that location instead. 
  2251.  
  2252. This line should be typed after the ODI driver line and before the 
  2253. protocol (IPX) line.  
  2254.  
  2255. The source-route driver must also be installed on all servers that will
  2256. be accessed by workstations using source routers. Ring numbers must
  2257. be unique, but all servers connected through source-routers can
  2258. use the same network address. 
  2259. ENDDESCRIPTION
  2260. ENDTOPIC
  2261.  
  2262. STARTTOPIC     def
  2263. STARTEXAMPLE
  2264. To broadcast on all routes:
  2265.  
  2266. protocol route
  2267.    source route def
  2268. ENDEXAMPLE
  2269. STARTUSAGE
  2270. DEF
  2271.  
  2272. Use DEF to broadcast on all routes. Omit DEF to broadcast 
  2273. on a single route only.  
  2274.  
  2275. Default = DEF is omitted (single-route broadcast)
  2276.  
  2277. Change the default when you are unsure of the stability 
  2278. of one or more routes in the network. Using DEF substantially
  2279. increases network traffic, especially on large, redundant ring
  2280. networks. 
  2281. ENDUSAGE
  2282. STARTDESCRIPTION
  2283. Use this setting to specify whether frames with unknown
  2284. destination addresses are broadcast simultaneously on all
  2285. possible routes. 
  2286. ENDDESCRIPTION
  2287. ENDTOPIC
  2288.  
  2289. STARTTOPIC     gbr
  2290. STARTEXAMPLE
  2291. To broadcast to all destinations, on all rings, by all routes:
  2292.  
  2293. protocol route
  2294.    source route gbr
  2295. ENDEXAMPLE
  2296. STARTUSAGE
  2297. GBR
  2298.  
  2299. Use GBR to broadcast to all destinations, on all rings, by all 
  2300. routes. Omit GBR to broadcast to all destinations, on all rings,
  2301. by a single route. 
  2302.  
  2303. Default = GBR is omitted (single-route broadcast)
  2304.  
  2305. Change this default when you want to ensure successful 
  2306. transmission across all possible routes. 
  2307. ENDUSAGE
  2308. STARTDESCRIPTION
  2309. Use this setting to specify whether broadcast frames are sent
  2310. simultaneously to all possible destinations, on all rings, by all
  2311. possible routes. 
  2312. ENDDESCRIPTION
  2313. ENDTOPIC
  2314.  
  2315. STARTTOPIC     mbr
  2316. STARTEXAMPLE
  2317. To broadcast multicast frames simultaneously:
  2318.  
  2319. protocol route
  2320.    source route mbr
  2321. ENDEXAMPLE
  2322. STARTUSAGE
  2323. MBR
  2324.  
  2325. Type MBR to transmit multicast frames simultaneously to a group of 
  2326. destinations by all possible routes. Omit MBR to transmit multicast 
  2327. frames by a single route.  
  2328.  
  2329. Default = Single route transmission only (MBR is omitted)
  2330. ENDUSAGE
  2331. STARTDESCRIPTION
  2332. Use this setting to specify whether frames with function addresses 
  2333. (multicast frames) are sent simultaneously to a group of destinations 
  2334. by all possible routes. 
  2335. ENDDESCRIPTION
  2336. ENDTOPIC
  2337.  
  2338. STARTTOPIC     nodes
  2339. STARTEXAMPLE
  2340. To allow 24 entries in the source-routing table:
  2341.  
  2342. protocol route
  2343.    source route nodes 24
  2344. ENDEXAMPLE
  2345. STARTUSAGE
  2346. NODES n
  2347.  
  2348. Replace "n" with a number from 8 to 255. If you type a number lower
  2349. than 8, 8 is used. 
  2350.  
  2351. Default = 16 entries
  2352. ENDUSAGE
  2353. STARTDESCRIPTION
  2354. Use this setting to specify the number of entries in the 
  2355. source-routing table. 
  2356. ENDDESCRIPTION
  2357. ENDTOPIC
  2358.  
  2359. STARTTOPIC     board
  2360. STARTEXAMPLE
  2361. To specify that logical board 2, the Token-Ring_SNAP frame, will
  2362. also be source routed: 
  2363.  
  2364. link driver token
  2365.    frame token-ring
  2366.    frame token-ring_snap
  2367.  
  2368. protocol route
  2369.    source route board 1
  2370.    source route board 2
  2371. ENDEXAMPLE
  2372. STARTUSAGE
  2373. BOARD n
  2374.  
  2375. Replace "n" with a logical board (frame) number from 1 to 16. 
  2376.  
  2377. Default = 1
  2378.  
  2379. For example, if a workstation has more than one frame type listed 
  2380. in the Link Driver option, by default only the first listed frame
  2381. is source routed. To enable Source Routing on the second (or other)
  2382. frames, you must explicitly specify the second frame as logical 
  2383. board 2 (or another number).
  2384. ENDUSAGE
  2385. STARTDESCRIPTION
  2386. Use this setting to specify the logical board (frame) of a
  2387. particular type that is performing Source Routing. 
  2388. ENDDESCRIPTION
  2389. ENDTOPIC
  2390.  
  2391. STARTTOPIC Virtual MLID for LAN Sharing
  2392. STARTDESCRIPTION
  2393. Use this option if you are using LANSHARE.SYS and the 
  2394. NetWare 4 server has a driver buffer size other than the
  2395. LANSHARE.SYS default of 1514 bytes. 
  2396.  
  2397. If LANSHARE.SYS and NetWare 4 do not have the same driver
  2398. buffer size, an error message is displayed on the system
  2399. console when binding and binding fails. 
  2400. ENDDESCRIPTION
  2401. ENDTOPIC
  2402.  
  2403. STARTTOPIC     virtual board size
  2404. STARTEXAMPLE
  2405. To set the buffer size to 2042 bytes:
  2406.  
  2407. virtual mlid for lan sharing
  2408.     virtual board size 2042
  2409. ENDEXAMPLE
  2410. STARTUSAGE
  2411. VIRTUAL BOARD SIZE number
  2412.  
  2413. Replace "number" with the number of bytes used by the NetWare 
  2414. 4 server.
  2415.  
  2416. Default = 1514 bytes
  2417. ENDUSAGE
  2418. STARTDESCRIPTION
  2419. Use this setting if you are using LANSHARE.SYS and the NetWare 
  2420. 4 server has a driver buffer size other than the LANSHARE.SYS
  2421. default of 1514 bytes.
  2422.  
  2423. If LANSHARE.SYS and NetWare 4 do not have the same driver
  2424. buffer size, an error message is displayed on the system
  2425. console when binding and binding fails.
  2426. ENDDESCRIPTION
  2427. ENDTOPIC
  2428. ENDMESSAGE
  2429.