home *** CD-ROM | disk | FTP | other *** search
/ Network Support Encyclopedia 96-1 / novell-nsepro-1996-1-cd2.iso / download / netware / vlmkt6.exe / SCRIPT.MSG (.txt) < prev    next >
Novell/C-Worthy Message Librarian  |  1993-09-28  |  6KB  |  108 lines

  1. Novell Message Librarian Data File Version 1.00
  2. COPYRIGHT (c) 1985 by Novell, Inc.  All Rights Reserved.
  3. Select the frame format to be used by the TCPIP protocols.
  4. LAN WorkPlace Configuration
  5. Disk 4
  6. LAN WorkPlace v4.1 DOS Applications
  7. LAN WorkPlace v4.1 Windows Applications
  8. Specify the network driver's configuration parameters. Press <F1> for more information. Press <Esc> to continue.
  9. Disk 1
  10. Disk 2
  11. Specify the SLIP/PPP driver's configuration parameters. Press <F1> for more information. Press <Esc> to continue.
  12. TCP/IP Transport for DOS v4.1 Installation
  13. Does your workstation boot from a file server?
  14. Do you want INSTALL to update your system files?
  15. Determine if your workstation boots from a file server or a local drive.
  16. What drive does your workstation boot from?
  17. Boots from a floppy diskette.
  18. Boots from a hard disk.
  19. Diskless workstation that boots from a file server.
  20. Most workstations start up (boot) from drive A: or C:
  21. What is your workstation's startup (boot) drive? 
  22. Please make sure the diskette from which your workstation boots is in the startup (boot) drive.
  23. Destination Drive Selection
  24. Target Directory = 
  25. Select the target directory.
  26. INSTALL has detected that ODI drivers are not present, please install and load the NetWare client drivers then run INSTALL again.
  27. Select the destination drive for installation.
  28. Enter the destination directory for the product.
  29. ODI Workstation Services
  30. NetWare for DOS Services
  31. NetWare for Windows Services
  32. Disk 5
  33. Disk 3
  34. Are TCP/IP parameters provided automatically by a BOOTP server?
  35. Enter the IP address for your workstation.
  36. Select how your workstation starts up (boots).
  37. Is Windows a shared application on the target server?
  38. Windows Path = 
  39. Enter the path to the Windows directory.
  40. Continue and create a new NET.CFG file.
  41. INSTALL could not find the NET.CFG file.
  42. Does your network have subnets?
  43. Determine whether INSTALL should make changes to the workstation system files.
  44. This product requires Windows 3.0 or later to run the Windows applications.  INSTALL could not find Windows in the specified directory.
  45. Continue without installing Windows applications.
  46. Specify a new path to search.
  47. Exit INSTALL and return to DOS.
  48. You may
  49. Enter the subnetwork mask for your workstation.
  50. Does your network use an IP router?
  51. Enter the router IP address.
  52. Do you want to replace the RESOLV.CFG file?
  53. A RESOLV.CFG file was found. Do you want to replace this file or use the existing configuration file?
  54. A RESOLV.CFG file was found in the \XLN\TCP directory. Do you want to use the existing file?
  55. Do you want to use the RESOLV.CFG file found in \XLN\TCP?
  56. Does your network have a Domain Name Server?
  57. Enter the network domain name.
  58. Domain Name = 
  59. Enter the Domain Name Server IP address.
  60. INSTALL could not find ANSI.SYS.
  61. The private client drive does not contain enough free space. Map another drive with more free space or delete some files and rerun INSTALL.
  62. Select the driver for your network board. Press <F1> for more information. 
  63. TCP/IP Transport v4.1
  64. The drive specified is not a network drive. Enter a new drive letter.
  65. Enter the name of the server that you log into.
  66. Server Name = 
  67. NET.CFG Path = 
  68. Enter the path to the NET.CFG file.
  69. Select the method your workstation uses to start up (boot) DOS.
  70. Specify the workstation IP address. Press <F1> for more information.
  71. Specify the subnetwork mask for your network. Press <F1> for more information.
  72. Determine whether your network uses subnets. Ask your network administrator for subnet information.
  73. Determine whether your network has an IP router. Ask your network administrator for this information.
  74. Determine the IP router address. Press <F1> for more information.
  75. Determine whether your network uses the Domain Name System. Ask your network administrator for this information.
  76. Ask your network administrator for your network domain name.
  77. Ask your network administrator for the IP address of the network's Domain Name Server.
  78. Enter the name of your preferred NetWare server.
  79. INSTALL cannot locate the specified Windows directory.
  80. INSTALL cannot locate the NET.CFG file.
  81. Specify the full DOS path to the Windows directory.
  82. The Windows version found by INSTALL was not loaded as a shared application.
  83. Installation has completed processing.
  84. Adding this component to your path could make the path too long. Press <F1> for more information.
  85. Select the IPX frame format your NetWare server uses to communicate with workstations.
  86.  Editing:
  87. AUTOEXEC.BAT
  88. CONFIG.SYS
  89. SYSTEM.INI
  90. WIN.INI
  91. PROGMAN.INI
  92. NET.CFG
  93. File editing in progress.
  94. ETHERNET_802.3
  95. ETHERNET_802.2
  96. ETHERNET_II
  97. ETHERNET_SNAP
  98. TOKEN-RING
  99. TOKEN-RING_SNAP
  100. IBM_PCN2_802.2
  101. IBM_PCN2_SNAP
  102. NOVELL_RX-NET
  103. "Do you want to load the networking software? [y/n] "
  104. Select the server that you log into.
  105. Do you want to install the SLIP/PPP driver?
  106. Put your boot disk in the startup (boot) drive.
  107. An updated MLID driver is not available for installation. You must manually update your driver.
  108.