home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Encyclopedia 96-1
/
novell-nsepro-1996-1-cd2.iso
/
download
/
netware
/
ptf414.exe
/
SNMP.TXT
< prev
Wrap
Text File
|
1993-09-23
|
1KB
|
28 lines
SNMP trap data is included with NetWare for SAA v1.3B so NetWare for SAA
event messages are also displayed in the NetWare Management System (NMS)
alarm monitor and alarm report.
To access this feature, perform the following tasks:
Note: This procedure is not necessary if you have installed NetWare for SAA
Services Manager v2.0 on your workstation.
- Copy the CE.MIB and NWSAA.MIB files to the NMS\SNMPMIBS\TRAPMIBS
directory on your NMS workstation. The CE.MIB file is located in the \NMS
directory on the Communication Executive installation diskette DISK5, and
the NWSAA.MIB file is located in the \NMS directory on the NetWare for SAA
installation diskette DISK3.
- From the NMS Tools Menu, access the SNMP Alarm Integrator and integrate
the trap MIBs into the NMS system.
- To enable context-sensitive help from the NMS alarm report, copy the
CE.HLP and NWSAA.HLP files to the NMS\Help directory on your NMS
workstation. The CE.HLP file is located in the \NMS directory on the
Communication Executive installation diskette DISK5, and the NWSAA.HLP file
is located in the \NMS directory on the NetWare for SAA installation
diskette DISK3.
- Add the network address of your NMS workstation to the Protocol IPX
section of the TRAPTARG.CFG file on each server from which you wish the NMS
alarm monitor and alarm report to receive NetWare for SAA event messages.
This file is located in the \ETC directory of the SYS volume.