From this list you can select to configure one of the communication servers currently running on the network.
<Enter> Press this key if you want to attach to the highlighted server.
<Esc> Press this key if you want to exit this list.-
Available Topics
Change Current Server
Select this option if you want to change the server you are configuring with CSCON.
Configure Communication Services
Select this option if you want to configure communication service profiles.
Configure Network Management
Select this option if you want to configure Network Management features for communication services.
Page 1 of 2
Configure Server Description
Select this option if you want to display or modify details about the server or communication services. For the server, you can modify the server's serial number and model number. For communication services, you can set the the supported protocol stacks.
Select this option if you want to display information
about the server, such as the date when the server was installed. You can also enter information about the
server installation location, the server itself,
and the host connection.
Page 2 of 2
Logout From Server
No Select this option if you want to remain logged on to the current server.
Yes Select this option if you want to log out from the current server.
<Esc> Press this key if you want to remain logged on to the current server.*
Audit Trail Configuration
Archive Hour
This field allows the user to designate the hour at which
the currently active log file will be saved and a new one
opened. This field is configurable to any hour between
12:00 AM and 11:00 PM.
Number to Retain
This field allows the user to specify the number of log
files that will be saved in the Archive Directory. The
allowable range of values is 0 through 365. A value of
zero means the current log file will be deleted as soon
as a new one is opened, and a value of 365 means that one
year of log files will be retained.
Page 1 of 2
Audit Trail Configuration
Archive Directory
This field specifies where the "SECAUDIT.LOG" files will
be archived. The archive directory MUST be in the "SYS"
volume. However, any subdirectory may be specified as
the archive directory.
Page 2 of 2
Configure Communication Services
From this list you can select a type of communication service to configure.
<Enter> Press this key if you want to configure the highlighted services.
<Esc> Press this key if you want to exit this list.
Exit CSCON
No Select this option if you want to remain on CSCON.
Yes Select this option if you want to exit CSCON.
<Esc> Press this key if you want to remain on CSCON.
Network Management
Audit Trail
Enter Yes if you want the server to save an audit trail of
user actions; otherwise enter No. When this option is set
to Yes, the audit trail information is saved in a database
file on the server. Users of the Communication Services Manager and the CSStatus program can view the information. Specifically, the audit trail records when a user logs in and logs out, and when a user starts and stops sessions.
Trace
Enter Yes if you want to use the CSSTART TRACE and CSSTOP TRACE commands at the communication services console.
Page 1 of 6$
Security
Enter Yes if you want to set the NetWare Communication Services security. If this option is set to Yes, users must be valid NetWare users with permission to use the session they have requested -- that is, their names must appear on the list of authorized user associated with the session they have selected. If this option is set No, any user can use any session.
Local Event Logging
Enter Yes if you want the server to save network event alerts (such as a token ring "beaconing" message) in a log. The
information is stored in a database file on the server. Users
of the Communication Services Manager and the CSStatus program can view this log information. Page 2 of 6o
NetView Management
Enter Yes if you want to have NetView support; otherwise
enter No. When this option is set to Yes, you can configure
the additional NetView parameters: Generate Alerts, Process Commands, NetView Security, and Upstream Management Node.
Generate Alerts
Enter Yes if you want to have NetView alert support; otherwise
enter No. When this option is set to Yes, the communication
server sends alerts to the IBM NetView facility.
Page 3 of 6
Process Commands
Enter Yes if you want to have NetView command support; otherwise enter No. When this option is set to Yes, the communication server accepts commands from the IBM NetView facility.
NetView Security
Enter Yes if you want to enable NetView command security;
otherwise enter No. If this option is set to Yes, a valid NetWare user must be specified with the OP= keyword in the NetView command.
Page 4 of 6q
Upstream Management Node
Press <Enter> on this field to get a list of Upstream Management Node types: NWSAA NetView Host, OS/2 NetView
Host, or NetView Collection Point. Select a type from
the list by pressing <Enter> again. NWSAA NetView Host
should be selected if the communication server has a
connection to an IBM NetView Host. NetView Collection
Point should be selected if the communication server
uses a NetView Collection Point to communicate with the
IBM NetView Host.
SAA Service Name
either the SAA Service name or *. Enter * to select the
Page 5 of 6
If you set Upstream Management Node to NetView Host, enter first SAA Service Profile loaded. This service name is
used to forward alerts to the IBM NetView facility.
Collection Point Server Name
If you set Upstream Management Node to NetView Collection Point, enter the Collection Point Server name
Page 6 of 6
Server/User Name
From this list you can configure a communication server or attach to a new server. You can also detach from the communication server to which you are currently attached.
<Enter> Press this key if you want to configure the highlighted server.
<Insert> Press this key if you want to attach to a new server.
<Delete> Press this key if you want to detach the highlighted server.
<Esc> Press this key if you want to exit the current menu.
Other Servers
From this list you can select a communication server to
attach to.
<Enter> Press this key if you want to attach to the highlighted server.
<Esc> Press this key if you want to exit this list without
selecting any server.
User Name
Enter your valid NetWare user name. To make changes in CSCON, you must log in as SUPERVISOR or SUPERVISOR equivalent.
Password
Enter the password that is valid for the user name you have just entered.
Save Changes
No Select this option if you want to exit the screen you were on without saving the changes you have just made.
Yes Select this option if you want to save the changes you have just made and exit the screen you were on.
<Esc> Press this key if you want to return to the screen you were on.
(.txt)