home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Encyclopedia 96-1
/
novell-nsepro-1996-1-cd2.iso
/
download
/
netware
/
pnwupd.exe
/
VLMS
/
LSL.MSG
(
.txt
)
< prev
next >
Wrap
Novell DOS Client Message
|
1995-04-17
|
4KB
|
76 lines
DOS Client Message File: LSL 101, Tran L1.0
The message file %s is invalid.
The LSL was not loaded.
The LSL has been successfully removed.
Max Boards %u, Max Stacks %u
BUFFERS %u %u
The LSL has not been loaded.
The configuration file used was "%s".
Available command line options:
/? -Displays this help screen
/U -Removes the resident LSL from memory
/C=[path\]filename
-Specify a configuration file to use. (The default is NET.CFG.)
Board %u was still registered with the LSL. It has been shutdown.
A default protocol stack for board %u is still
registered with the LSL. Unload the stack and try again.
A prescan receive protocol stack for board %u is still
registered with the LSL. Unload the stack and try again.
The protocol stack %s is still registered with the LSL.
Unload the stack and try again.
The LSL failed to locate the configuration file "%s".
Looking for NET.CFG.
The NET.CFG file was not found. The LSL will use system defaults.
An invalid command line option was specified: "%s".
The LSL has already been loaded.
Cannot find a loaded LSL to unload.
The Multiplex Interrupt (2Fh) has no available slots.
The LSL cannot be unloaded.
Another program has been loaded after it.
Unload the other program and try again.
The LSL cannot be unloaded.
Either the installed LSL is a different version than this LSL module, or
another program has hooked the 2Fh interrupt vector and not released it.
Unload the other program and try again.
The configuration file contains an invalid entry on line %u.
Ignored the entry "%s"
The configuration file contains a missing or invalid value
for keyword "%s" on line %u.
The entry was ignored.
An invalid filename was specified: "%s".
Buffers %u, Buffer size %u bytes, Memory pool %u bytes.
Buffers %u, Buffer size %u bytes, Memory pool %u bytes.
The LSL version is v%hu.%.2hu
The LSL configuration table version is v%hu.%.2hu
LSL Initial Entry point = %.4X:%.4X
LSL Protocol Support Entry point = %.4X:%.4X
LSL General Services Entry point = %.4X:%.4X
LSL MLID Support Entry point = %.4X:%.4X
LSL Config Table pointer = %.4X:%.4X
LSL Stat Table pointer = %.4X:%.4X
Memory Pool
Memory Available: %4u paragraphs
Memory Inuse: %4u paragraphs
Largest Available Block %4u paragraphs
Number Available Blocks %u
Memory Management Overhead %u bytes
Minimum Allowed Allocation %u bytes
Internal Information Table:
LSLProtoIDArray %.4X:%.4X
LSLSystemFlags %.4X:%.4X
LSLPStackBoundMLIDFlags %.4X:%.4X
LSLMLIDBitMasks %.4X:%.4X
LSLStackNames %.4X:%.4X
LSLMediaIDTable %.4X:%.4X
A prescan transmit protocol stack for board %u is still
registered with the LSL. Unload the stack and try again.
The LSL cannot be unloaded.
Another program has hooked and not released one or more of the LSL
interrupts. Unload the other program and try again.
The LSL was not Unloaded.
The LSL machine type is IBM.
The LSL machine type is NEC.
The LSL machine type is Fujitsu (FMR).
The LSL machine type is %u.
CoPyRiGhT=(C) Copyright 1990-1995 Novell, Inc. All Rights Reserved.