home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Encyclopedia 96-1
/
novell-nsepro-1996-1-cd2.iso
/
download
/
netware
/
nwl11e.exe
/
README.TXT
< prev
next >
Wrap
Text File
|
1993-10-08
|
54KB
|
1,189 lines
NOVELL TECHNICAL INFORMATION DOCUMENT
TITLE: Upgrade to NetWare Lite 1.1 for DOS and Win
DOCUMENT ID: TID000239
DOCUMENT REVISION: B
DATE: 08OCT93
ALERT STATUS: Yellow
INFORMATION TYPE: Symptom Solution
README FOR: NWL11E.EXE
NOVELL PRODUCT and VERSION:
NetWare Lite 1.1 for DOS and Windows
ABSTRACT:
NWL11E.EXE is an upgrade allowing a NetWare Lite v1.0 user to upgrade all
1.0 software to NetWare Lite 1.1 for DOS and Windows. This file is for the
English version of NetWare Lite. Several enhancements have been made to
NetWare Lite 1.1 for DOS and Windows.
_________________________________________________________________
DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL.
NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION.
HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY. NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.
_________________________________________________________________
Self-Extracting File Name: NWL11E.EXE
Files Included Size Date Time
\
README.TXT (This File, needed for install)
NWL11E.TXT (Same info as this File)
UPGRADE.DOC 5603 10-05-92 11:59a
NE2000.INS 96 9-11-91 7:11p
3C503.INS 170 9-11-91 7:11p
WDPLUS.INS 219 9-11-91 7:11p
NE1000.INS 97 9-11-91 7:11p
TRXNET.INS 203 9-11-91 7:11p
3C503.CO@ 8574 6-14-91 9:14a
3C523.CO@ 7604 7-29-91 9:35a
IPXODI.CO@ 12252 11-20-91 4:57p
LITE$RUN.OVL 2400 9-11-91 7:11p
LSL.CO@ 6031 1-30-92 4:05p
NE1000.CO@ 7889 7-29-91 9:37a
INSTALL.COM 13792 8-25-92 1:31p
NLCACHEX.EX@ 13873 5-05-92 12:47a
NLCACHEC.EX@ 10706 5-05-92 12:46a
DEDICATE.COM 192 3-10-92 9:31a
NE2100.CO@ 8034 10-11-91 5:10p
NLSNIPES.EXE 18042 9-11-91 7:11p
NETBIOS.EX@ 12653 5-18-92 3:26p
PCN2L.CO@ 8746 7-17-91 3:40p
TASKID.CO@ 1681 12-19-90 3:48p
TBMI.CO@ 4615 7-10-91 12:27a
TBMI2.CO@ 5062 12-04-91 2:46p
TOKEN.CO@ 10242 6-14-91 4:10p
UPATCH.EXE 19690 1-16-92 9:35a
TRXNET.CO@ 7696 8-06-91 10:48a
VIPX.38@ 7501 7-08-92 10:55a
NLCINST.EX@ 24542 6-02-92 8:13a
LCACHEM.EX@ 12362 5-05-92 12:47a
NET.EXE 35368 5-28-92 4:05p
DRIVER.LST 1556 4-01-92 11:24p
IPXSYNC.EXE 15664 7-01-92 11:44a
SERVER.EXE 45411 7-01-92 8:25a
NET.HL@ 17492 5-18-92 3:41p
NET.OVL 95685 6-16-92 1:47p
NE1500T.INS 127 3-23-92 8:44a
NE2100.INS 126 3-23-92 8:43a
CACHE.TX@ 9753 6-01-92 5:26p
INSTALL.EXE 59754 6-30-92 8:29a
CLIENT.EXE 21081 6-29-92 4:40p
WDPLUS.CO@ 10902 6-21-91 2:11p
NE1500T.CO@ 8038 10-11-91 5:09p
NE2.CO@ 9283 11-04-91 4:19p
NE2000.CO@ 8181 6-03-91 1:25p
NetWare Lite v1.1 (7/02/92)
Print this file and save it for future reference.
To print this file to a local printer,
1. Insert the DRIVER diskette into drive A:.
2. At the DOS prompt, type "A:" and press <Enter>.
3. At the DOS prompt, type "COPY NWL11E.TXT PRN" and press <Enter>.
CONTENTS
1. New Features
2. Installing NetWare Lite and Logging In
3. Upgrading NetWare Lite v1.0 to NetWare Lite v.1.1
4. General Information
5. Optimize Your Network Server
6. Printing
7. Network Directory and File Sharing
8. Basic Network Application Configuring Tips
9. Basic Troubleshooting
10. NetWare Lite and NetWare Compatibility
11. Auxiliary NetWare Files
12. NetWare Lite and Windows
1. NEW FEATURES
* NetWare Lite Cache software makes the network run 3 to 6 times faster
by reducing time waiting for the hard disk.
For more information, after installing a NetWare Lite server, print the
CACHE.TXT file in the NWLITE directory.
* NET SAVE retains mapped drives, captured ports, and DOS environment
variables.
At the DOS prompt, type "NET SAVE" and press <Enter>. The mapped drives,
captured ports, and DOS environment variables are saved in a file named
NLLOGIN.BAT. Next time you want to log in, you can type "NLLOGIN" (instead
of "NET LOGIN") and press <Enter> to log in, automatically map the drives,
capture the ports, and set up the DOS environment to the settings in the
NLLOGIN.BAT file.
* SERVER.EXE and CLIENT.EXE can be loaded into upper memory (between 640
KB and 1024 KB).
You must have an upper memory block (UMB) with at least 64 KB
available to load SERVER.EXE into upper memory. Modify the SERVER and
CLIENT lines in STARTNET.BAT to include the specific load high command for
your memory manager. Example: If you use DR DOS 6.0, change the SERVER line
to HILOAD SERVER and the CLIENT line to HILOAD CLIENT.
Although SERVER.EXE needs an upper memory block of at least 64 KB to
load, it may not use the entire 64 KB. Once SERVER.EXE is loaded, the
remaining upper memory can be loaded with other programs like CLIENT.EXE.
If SERVER.EXE is configured so it requires more than 64 KB and it
will not fit in an upper memory block, you receive a message and SERVER.EXE
does not load.
* NetWare Lite v1.1 SERVER.EXE's default size is about 10 KB smaller
than in NetWare Lite 1.0 SERVER.EXE's default size. If you have a
two-computer network and set the server configuration to the minimum
values, SERVER.EXE would be approximately 33 KB. The size of SERVER.EXE is
relative to the server configuration settings.
* You can unload SERVER.EXE and CLIENT.EXE from memory.
This makes more memory available for applications when you are not
using the NetWare Lite network.
NOTE: You can only unload programs in reverse loading order.
CLIENT.EXE must be unloaded before SERVER.EXE on a server/client station.
To unload CLIENT.EXE from memory, at the DOS prompt, type "CLIENT U" and
press <Enter>.
To unload SERVER.EXE from memory, at the DOS prompt, type "SERVER U"
and press <Enter>.
* Commands are more like native NetWare.
Added a NET WHOAMI alias for NET INFO and a NET USERLIST alias for
NET ULIST.
* You can use the NET SLIST command to get a list of the servers on the
network without logging in.
At the DOS prompt, type "NET SLIST" and press <Enter>.
* NET AUDIT and NET RECEIVE display their status (on or off).
At the DOS prompt, type "NET RECEIVE" or "NET AUDIT" and press
<Enter>. The status (on or off) appears.
* You can use NET RECEIVE to set a message-display time limit at your
workstation.
At the DOS prompt, type "NET RECEIVE number" and press <Enter>.
Replace number with the number of seconds (0 to 1500) you want the message
to remain on the screen. If you enter 0, the message remains on the screen
until you simultaneously press <Ctrl> <Enter>.
* You can have client workstations notified when print jobs are
complete.
Set the NET CAPTURE notify option to yes. (The notify option default
is set at no.) Example: NET CAPTURE LPT1 N=Y
Your client workstation is notified when your print job is
completed. To clear the notification, simultaneously press <Ctrl><Enter>.
* CD-ROM drive support.
You can install CD-ROM drivers on a server-only computer or on a
server-client computer. Additional information is available on Novell's
automated fax system.
2. INSTALLING NETWARE LITE AND LOGGING IN
NOTE: If you have NetWare Lite v1.0 software on the computer, use the
upgrade option so your network configuration remains intact.
Determine Hardware Interrupt and Port Address Requirements
If your computer has an internal or external modem, bus mouse, fax
board, scanner, or other add-on board, determine if any of the device
interrupt levels (IRQ) or port addresses (I/O addresses) will conflict with
the NetWare Lite default interrupt 3 and port address 300 (most network
cards are set to these values at the factory).
If there is a conflict on the actual card, change the NetWare Lite
interrupt level or port address values so they don't conflict with the
other devices. Then select the corresponding interrupt and port address
setting during installation. For most computers, you can change the
interrupt level and port address during Step 3 of the NetWare Lite
installation. For IBM PS/2 computers, change the interrupt level and I/O,
EPROM (port address) on the PS/2 reference diskette.
Use an interrupt (IRQ) for your network card. The following table
shows what the IRQ levels are used for in XT and AT computers.
_______________________________________
|IRQ | XT | AT (286, 386, 486) |
|____|_____________|____________________|
| 0 | | timer output 0 |
| 1 | | keyboard |
| 2 | EGA/VGA | EGA/VGA |
| 3 | COM2 | COM2 |
| 4 | COM1 | COM1 |
| 5 | hard disk | LPT2 |
| 6 | | floppy disk |
| 7 | LPT1 | LPT1 |
| 8 |Not Available| real time clock |
| 9 |Not Available| |
| 10 |Not Available| |
| 11 |Not Available| |
| 12 |Not Available| |
| 13 |Not Available| co-processor |
| 14 |Not Available| hard disk |
| 15 |Not Available| |
|____|_____________|____________________|
The network card needs to use a unique I/O address. The following
table shows possible address conflicts.
____________________________________________________
| I/O ADDRESS | POTENTIAL CONFLICT DEVICES |
|_____________|______________________________________|
| 1F0 | AT disk controller |
| 200 | game controller/joystick (200-20F) |
| 220 | Novell network keycard |
| 240 | |
| 260 | LPT2: (278-27F) |
| 280 | LCD display on Wyse 2108 PC |
| 2A0 | |
| 2C0 | |
| 2E0 | COM4:, GPIB-Adapter 0 (2E1) |
| | COM2:, Data acquisition (300-31F) |
| 300 | |
| 320 | XT hard disk interface (320-32F) |
| 340 | |
| 360 | LPT1:(378-37F) |
| 380 | SLDC/Sec Bi-Sync interface (380-38C) |
| 3A0 | Primary Bi-Sync interface (3A0-3A9) |
| | Monochrome display (3B0-3BB) |
| 3C0 | EGA display control (3C0-3CF) |
| | CGA display control (3D0-3DF) |
| 3E0 | COM3: (3E8-3EF) |
| | floppy disk controller (3F0-3F7) |
| | COM1: (3F8-3FF) |
|_____________|______________________________________|
Install NetWare Lite Software
Insert the PROGRAM diskette into drive A:.
At the DOS prompt, type "A:" and press <Enter>.
At the DOS prompt, type "INSTALL" and press <Enter>.
Follow the instructions and help provided on the screen during
installation.
If your computer has an internal or external modem, bus mouse, fax
board, scanner, or other add-on board, at Step 3 change the interrupt level
(IRQ) and port address (I/O address) so that they do not conflict with
other device interrupt levels or port addresses. (You should have changed
the network board's interrupt level and port address before installing the
NetWare Lite software.)
NOTE: Your original AUTOEXEC.BAT and CONFIG.SYS files are saved in the
directory with a .BNL (Before NetWare Lite) extension. Your NET.CFG file is
saved in the NWLITE directory as NET.BNL.
Make sure that your AUTOEXEC.BAT path statement includes the DOS
directory. If it does not, the DOS SHARE program will not load.
Start NetWare Lite
Remove the disk from drive A:
Restart your computer by simultaneously pressing <Ctrl>, <Alt>, and
<Del>. As the computer is booting, the STARTNET.BAT file loads SHARE, LSL,
the LAN ODI driver, IPXODI, SERVER, and CLIENT.
If IPXODI reports an error (such as a conflict in the interrupt
setting or port address) when loading, check the interrupt settings and I/O
address (or port address) setting on other boards in the computer to
determine if they conflict with the network board's interrupt settings.
Also check NET.CFG to make sure the settings match the network board. Make
sure you set the network board setting correctly when installing NetWare
Lite.
If interrupt settings conflict, change the interrupt setting on the
network board and install NetWare Lite again or edit NET.CFG and reboot.
At the DOS prompt, type "NET" and press <Enter>. You will be prompted
for a username.
Verifying Network Connections
Insert the PROGRAM diskette into drive A:.
At the DOS prompt, type "A:" and press <Enter>.
At the DOS prompt, type "INSTALL" and press <Enter>.
Highlight "Verify network connections" and press <Enter>.
Make sure that the workstation name appears in the list.
Verify the network connections for all workstations on the network.
All the workstations on the network should appear on the list.
Let each computer run for at least 2 minutes to make sure there are no
intermittent problems. If a computer doesn't appear in the list, there is a
hardware problem (cards, cables, etc.) or the network card is configured
incorrectly.
Exit the installation program on each workstation.
Logging in After Installing NetWare Lite
After installing the first server on a new NetWare Lite network, log
in as SUPERVISOR (the only user defined on the network). Type "NET LOGIN
SUPERVISOR" and press <Enter>.
NOTE: The SUPERVISOR account on a newly installed network does not
have a password. For network security, set a password on the SUPERVISOR
account soon after the network is installed. DO NOT FORGET THE SUPERVISOR
PASSWORD.
When additional servers are installed on an existing NetWare Lite
network, defined users, network directories, and network printers are
automatically available. You should log in using one of the defined user
accounts.
Reinstall NetWare Lite Software
If you have to reinstall NetWare Lite, you can save the database of
network directories, network printers, server configuration, and printer
control and the database of network users by backing up the network
management system files before reinstalling NetWare Lite.
After reinstalling NetWare Lite, you can restore the system files so
the users, network printers, network servers, server configuration and
printer control are the same as they were when the last system file backup
was made.
For more information about backing up and restoring system files, see
page 28 in the manual.
3. UPGRADING NETWARE LITE v1.0 to NETWARE LITE v1.1
When you upgrade from v1.0 to v1.1, the server and network information
remain on the network. The users, network directories, and network printers
don't have to be set up again.
The upgrade option can be used on all computers that have NetWare Lite
v1.0 installed.
Insert the PROGRAM diskette into drive A:.
At the DOS prompt, type "A:" and press <Enter>.
At the DOS prompt, type "INSTALL" and press <Enter>.
When the NetWare Lite Install Menu appears, highlight "Upgrade this
machine to v1.1" and press <Enter>. The NetWare Lite v1.1 software is
loaded.
When upgrading floppy-only NetWare Lite software, the INSTALL program
asks for a path. Type "A:" and press <Enter>.
Reboot your computer so NetWare Lite 1.1 is loaded.
4. GENERAL INFORMATION
Files on NetWare Lite diskettes that end with an "@" are compacted and
will not work until they are unpacked. The INSTALL program unpacks
compacted files and renames them removing the "@".
* Questions and Answers
a. How can I tell if my hardware and drivers are functioning
properly?
After loading STARTNET.BAT, verify the network connections as
explained in the manual on page 7. Let each computer run for at least 2
minutes to make sure there are no intermittent problems. If a computer
doesn't appear in the list, there is a hardware problem (cards, cables,
etc.) or the network card is configured incorrectly.
b. I can't find an ODI driver for my card. Can I use IPX.COM?
Yes.
In the STARTNET.BAT file, replace the following statements with
IPX.COM:
lsl
NE2000 (Or applicable driver.)
ipxodi a
(The above three statements are equivalent to the older
IPX.COM.)
c. What causes network drivers, certain DOS commands, and some
programs to lock up and act unpredictably (i.e. DOS extend error 59,
WordPerfect disk error 51)?
This is probably a hardware conflict or a memory conflict with
the memory area between 640 KB and 1024 KB.
Some network cards use a shared memory address that resides in
system memory (upper memory). Often the memory address used by the card is
written over by another program which can cause unpredictable results.
You need a memory management program with the capability of
excluding specific areas of memory from other programs. See the memory
manager's documentation to see how to exclude the memory and refer to the
network card's documentation to see how much memory to exclude.
Other possible causes include a bad cable, a cable that is
non-standard, a homemade cable, a wrong terminator (use 50 ohm for Ethernet
and 93 ohm for ARCnet), no ground terminator, or noise on the wire. If
using 10Base-T, connect the 10Base-T cable to a concentrator, not directly
to the second computer.
d. What are the possible conflicts that could interfere with
default settings on network cards (IRQ 3 and I/O address 300)?
The most common IRQ3 conflicts occur when COM2 is used (as a
second serial port or for an internal modem, or fax board). These
conflicts may not show up until you try to use COM2:, or in the case of a
bus mouse, until you try to use the NET command with the bus mouse
initialized. Use fax document #212 or the chart previously given in this
document.
e. I receive errors in DOS applications such as share violations,
unable to access file XXXX errors, errors entering and exiting an
application, or the station hanging. What can I do?
Change the application directories' default rights to READ. Some
applications require Write access to the directory. If this is the case,
change the .EXE, .OVL and .COM files rights to READ ONLY using the DOS
command ATTRIB or third party software.
Remove the TSRs running on your computer one at a time and run
the application again to determine if a TSR is causing the problem. (Load
NetWare Lite using the STARTNET command before you load other TSRs.)
Check for conflicts on interrupts used by the hardware.
Increase the value of "FILES=XX" in CONFIG.SYS. Example:
"FILES=50."
Increase the value of the "Client tasks" in the Net Utility
Server Configuration. Make sure there are at least 10 tasks per client
connected to the server for DOS and at least 15 tasks per client connected
to the server for Windows.
Check the application's setup or the configuration section that
applies to network selection. Select NO NETWORK or OTHER. Do not select
NETWARE or NOVELL.
Check the server status. Make sure that the PEAK values are not
as high as the configured (CFG) values. If the PEAK values are approaching
the configured values, increase the applicable configured values and reboot
the computer.
Make sure the application directory is included in the PATH
statement in AUTOEXEC.BAT or STARTNET.BAT.
Check the memory requirements of the program and PC memory for
possible problems.
Increase the SHARE file and lock parameters in STARTNET.BAT or
AUTOEXEC.BAT.
Example: SHARE /F:8000 /L:200
[The file (/f) parameter is not applicable in DR DOS 6.0.]
* Load NETBIOS if an application requires it.
* Load SPX if an application requires it.
Modify the STARTNET.BAT file "IPXODI A" command to "IPXODI D." When
the "A" is removed, both IPXODI and SPX is loaded. You can type "IPXODI ?"
at the DOS prompt to see a list of all available options for IPXODI.
* Avoid mapping local drives as network drives.
You can map local drives (for example, A: or B:) and use them
temporarily as network drives; however, we Do Not recommend doing this. If
you run out of drive letters to map, increase LASTDRIVE in your CONFIG.SYS
file.
* Do Not use ASSIGN with NetWare Lite.
The DOS (3.3) reference manual recommends the use of SUBST instead
of ASSIGN.
* WARNING: Caches, other than the NetWare Lite Cache, may need to have
delayed writes, deferred writes, posted writes, or queued writes disabled
if they are used with NetWare Lite. Many cache programs "wake up" to do
writes in the background, they do not protect themselves from re-entry with
a DOS-critical section callout. If you use a cache (other than the NetWare
Lite Cache) with deferred writes, posted writes, or queued writes turned
on, you may get random hangs, data corruption, or other abnormal behavior.
To use a cache other then the NetWare Lite Cache, call the cache company's
technical support group to find out if their cache's deferred writes,
posted writes, or queued writes work with NetWare Lite.
Many caches don't allow delayed writes, deferred writes, posted
writes, or queued writes when using a peer-to-peer network. However, the
NetWare Lite Cache can use delayed writes. If you are using a cache that
has one of the above options, make sure the option is turned off.
* Do not make server names 15 characters long if you remotely manage
servers.
If you remotely manage a server with a name that is 15 characters
long, the server will hang. To fix the problem, make the server name less
than 15 characters long.
5. OPTIMIZING YOUR NETWORK SERVER
* Modify the number of receive buffers and number of I/O buffers.
Depending upon the number and frequency of requests to the server,
increasing the number of receive buffers and I/O buffers may enhance server
performance.
The number of receive buffers doesn't need to be more than 2 above
the number of simultaneous connections, but it shouldn't exceed 12.
Generally 8 to 12 receive buffers and 1 to 4 I/O buffers are
sufficient for up to 25 connections.
* Modify the receive buffer size and I/O buffer size for the network.
Using multiples of 512 bytes, increase the receive buffer size up to
the maximum supported by the network topology (for example, Ethernet or
Token ring) or a maximum of 8192 bytes. However, increasing the size of the
receive buffer increases the size of the server software when it is in RAM.
If you enter too large a number at the receive buffer size field in the
Server Configuration option, NetWare Lite truncates the value to the
highest value that the network card can transmit or receive.
Increasing the receive buffer size lets clients request more data
from or send more data to the server with each read and write operation.
When more data is sent, fewer requests to the disk are necessary so you get
better performance from the server.
* Unfragment files or optimize disk.
MAKE SURE THAT SERVER.EXE IS NOT RUNNING WHEN YOU UNFRAGMENT FILES!
Fragmented files adversely affect server performance. Periodically
unfragment files on each server's hard disk using a disk optimizing or a
disk compression tool.
Never run any low-level disk repair utilities (including CHKDSK /F
or disk optimizing utilities) on the hard disk while the server
(SERVER.EXE) is loaded. Doing so can corrupt data stored on the hard disk.
Do not run low-level utilities from a client that has a drive mapped to the
server.
* Use SUBST instead of MAP for network drives on a local server.
If your computer has network directories on its hard drive, you can
use the SUBST command instead of NET MAP command. It is more efficient to
use SUBST to access network directories on your hard disk than it is to use
NET MAP.
6. PRINTING
* Questions and Answers
a. Why does a status message "Printer off Line" or "Printer Out of
Paper" pop up when I try to print even though neither of these situations
is accurate?
Check the network printer configuration to make sure it is
configured for the port (LPT1, LPT2, LPT3) that it is actually connected
to.
Example: If the printer is connected to LPT1 on the server, the
network printer configuration must be set to LPT1.
If the network printer configuration and printer port are
correct, increase the printer configuration "Error wait time" by 15-second
increments and try again.
b. One of the servers has intermittent problems when trying to
print. Sometimes the server hangs and other times the print job disappears
without being printed.
If you are using LPT1 on the server, make sure that your network
card is NOT set to I/O 360. This port address overlaps with the I/O address
for LPT1 (378). If LPT2 is used, INT 5 will cause a conflict.
c. How can I let NetWare Lite know that I have changed the IRQ and
I/O address on my network LAN driver without reinstalling the program?
Edit C:\NWLITE\NET.CFG. If the file is not there, create one
like this:
#Setup the NE2000 card (This is a comment line)
link driver NE2000 (Enter the ODI driver name
here in place of NE2000.)
int 3
port 300
MEM D000 (This line is used only when
a card has a shared memory
address.)
Enter the correct settings into this file and reboot the
computer. The driver loads with the correct settings.
If you change network cards, change the NET.CFG file to match
the settings on the new card and change the STARTNET.BAT driver name to the
new driver name.
MicroChannel computers typically do not require NET.CFG.
* Using characters per second and print buffers.
The print buffer is an area in memory where characters are stored
before being printed. The larger the print buffer size, the fewer times the
server must to go to disk to read characters to print.
If the "Characters per sec" value is high (relatively speaking), the
printer is driven faster and the DOS running on the computer is interrupted
more often to send characters to the printer. The opposite is also true if
the value of the "Characters per sec" is low (relatively speaking) and the
print buffer size is small.
Tune these values to the speed or chosen speed of the printer. If
the printer is physically a "slow" printer (like a serial printer), setting
the "Characters per sec" parameter to a high number does not affect the
speed of printing, but it can adversely affect the foreground DOS process.
For serial printers, the "Chars per sec" value should be about the
same as the printer baud rate divided by 10. Example: If the baud rate is
9600, the "Char per sec" value should be about 960.
* Access local network printers only through the network.
When you have a network printer attached to your workstation,
capture a port when you need to print to the attached printer. If you print
directly to the printer without capturing the port, you may corrupt print
jobs or get a write error.
* Make network printers location-independent.
Example: Your server, named DEPT_SERVER is an 8 Mhz 286 computer
with a 40 MB hard disk. It has a network printer named LASERJET. Clients
capture ports to LASERJET and print to it almost every day.
You buy a 50 Mhz 486 computer with a 1 GB hard disk and want to move
the LASERJET network printer to the new computer. You set up the new
computer and install the NetWare Lite software, calling the server
HOT_SERVER. You then create a new network printer named LASERJET (same name
as before) on HOT_SERVER. Remove the network printer from DEPT_SERVER.
When clients capture the LASERJET network printer (without
specifying the server name in the command line), the LASERJET network
printer is on HOT_SERVER, not DEPT_SERVER. Nothing in the client's
STARTNET.BAT or AUTOEXEC.BAT needs to be changed. In fact, the client does
not need to know that the computer that the LASERJET network printer was
connected to has changed.
* Give each network printer a name that describes the printer.
A good network printer name for a LaserJet II printer would be
LASERJET_II or LJ2. Other descriptive network printer names could be
EPSON_DOT or OKIDATA_DOT.
Network printer names like PRINTER1 or PRINTER2 do not describe the
printer and do not help users on the network determine which printer to
use.
* When sending print jobs to postscript printers or when you want to
print in Novell byte stream mode, make sure that your NET CAPTURE command
includes the following settings:
Banner equals No (B=N)
Tabs equals Zero (T=0)
Formfeed equals No (F=N)
Setup string equals Default (S=DEFAULT)
NOTE: The Default setup string should not have any values when it
is used for postscript printing or when it is used for byte stream mode.
If your print job gets split to multiple jobs when printing or if
the first part of a printed document is in fonts and the rest of the
document isn't, increase the WAIT value (W=10) to a value higher than 10
seconds, for example, 20 seconds (W=20).
* You can define up to 64 setup strings for each network printer. Each
setup string can have up to 64 two-digit hexadecimal characters.
A setup string is a series of characters that put the printer into a
particular mode (for example, landscape mode or large character mode).
By default, the DEFAULT setup string is set to nothing. Make the
DEFAULT setup string a sequence of values that resets the printer. Many
printers use the string "1B 45" (<Esc>E) to reset the printer. Check your
printer documentation to determine which setup string sequence value resets
the printer and which sequences place the printer into other modes. Setup
strings are always entered using hexadecimal codes.
You can submit jobs that print in different printer modes by
defining multiple setup strings for a network printer. Use setup strings as
part of the NET CAPTURE command or in the NET menu utility "Print" option.
7. NETWORK DIRECTORY AND FILE SHARING
* Give each network directory a name that describes the contents of the
network directory to help locate applications and files.
A good name for a network directory that contains the WordPerfect
application would be WORDPERFECT or WP. Other descriptive network directory
names could be GAMES, PUBLIC, or TURBOC.
Network directory names like CDRIVE or DDRIVE do not describe the
directory contents so they do not help network users find applications or
files.
NOTE: During NetWare Lite installation, the network directory CDRIVE
is created for you. When you are familiar with network directories, remove
CDRIVE and replace it with one or more descriptive network directories.
* Make executable files (*.EXE, *.COM, *.BAT, *.OVL) READ-ONLY files, or
place executable files in a network directory with READ default access
rights.
If an executable file is not marked READ ONLY or is not in a network
directory with the default access right READ and the file is accessed by
more than one user, the users may be temporarily denied access to a file.
To make executable files READ-ONLY, see the DOS documentation for
the ATTRIB command.
To make the network directory default access rights READ, see
"Create or Modify Network Directories" in the NetWare Lite manual.
* Make network directories location-independent.
Example: Your server, named DEPT_SERVER, is an 8 Mhz 286 computer
with a 40 MB hard disk. It has a network directory named ALL_APPS. All
clients map drives to ALL_APPS and use it every day.
You buy a 50 Mhz 486 computer with a 1 GB hard disk, and want to
move the ALL_APPS network directory to the new computer.
You set up the new computer and install the NetWare Lite software,
calling the server HOT_SERVER. You then create a new network directory
named ALL_APPS (same name as before) on HOT_SERVER. Copy the files from
DEPT_SERVER to HOT_SERVER. Remove the network directory ALL_APPS from
DEPT_SERVER.
Now when clients access the ALL_APPS network directory (without
specifying the server name in the command line), the ALL_APPS network
directory is on HOT_SERVER, not DEPT_SERVER. Nothing in the client's
STARTNET.BAT or AUTOEXEC.BAT needs to be changed. In fact, the client does
not need to know that the computer that the ALL_APPS network directory was
on has changed.
* Include the PATH Command in AUTOEXEC.BAT or STARTNET.BAT to search
forapplications.
Include network directories that contain applications (executable
files) that are mapped to drive letters in the DOS environment variable
path.
Example: If the AUTOEXEC.BAT or STARTNET.BAT file contains NET MAP
L: DR_DOS_6 and NET MAP M: NWLITE, include L: and M: in the path. Use the
statement "PATH=%PATH%;L:\;M:\;" in the AUTOEXEC.BAT.
NOTE: Each drive (letter, colon, and backslash separated by a
semicolon) included in the PATH command is searched when an executable
filename is entered and executed at the DOS prompt. If an application or
executable file is located in any of the drive letters included in the PATH
command, the application or executable file is launched.
When NetWare Lite is installed, the INSTALL program searches for an
AUTOEXEC.BAT file. If a PATH command is included in the file, the
installation program adds "C:\NWLITE" to the path command. If there is no
PATH command, the installation program adds the command "PATH=C:\NWLITE" to
the AUTOEXEC.BAT file.
8. BASIC NETWORK APPLICATION CONFIGURING TIPS
Installing applications on NetWare Lite may be different than
installing the same applications on regular NetWare because NetWare Lite is
a peer-to-peer network.
If an application requires configuration information when it is
installed, determine which workstations will use the application.
Example: The application TESTAPP.EXE is being installed and the
installation program asks what kind of monitor will be used with the
application. The computer you are at has a VGA screen, but no other
computer on the network has a VGA screen. If you select VGA, when the
application is run from across the network on a computer that has a CGA
screen, the application may not properly function.
If the installation procedure asks what type of network you are using,
don't select NOVELL or NETWARE. Select OTHER, IBM COMPATIBLE, DOS, NETBIOS,
or PEER-TO-PEER. For more details, see Appendix B in the manual.
Make all executable files READ-ONLY using the DOS ATTRIB command.
Check the PATH statements and configuration files for incorrect paths
to programs and data files.
Make sure SHARE is loaded with sufficient locks and memory (/L and /F
parameters). See the DOS documentation.
Check the CONFIG.SYS for sufficient FILES and BUFFERS on all nodes.
Also find out if the application has a separate method of configuring the
number of open files. Clipper compiled applications often have a separate
configuration method.
Separate shared and non-shared files into different mapped
directories. Make sure you have sufficient connections and tasks on the
server to do the job.
9. BASIC TROUBLESHOOTING
Use Novell IMSP certified drivers and boards.
Establish the sequence of operations that cause the problem. Is it a
random problem? Does it only happen in a particular application or
particular combination of applications? What do the applications do? This
background information will help you decide if the problem is hardware or
software.
Get the layout of the network. Find out how many server-clients,
server-only, and client-only computers are on the network. Find out what
type of network card and interrupt and port address settings are installed
in each computer. Find out what drivers, printer models, brand and type of
computers, versions of DOS, and additional cards and other peripherals are
on the network.
Resolve all hardware problems first. Some symptoms that appear to be
application related are caused by connectivity issues.
Reboot the computer without loading the network software. See if the
problem exists when the network software is not loaded.
Find out if the applications are network versions. Many non-network
applications will work on the network, but some will not.
10. NETWARE LITE AND NETWARE COMPATIBILITY
The shell's 25th line message may block a NetWare Lite server, causing
stations that are attached to the server to appear to hang.
NetWare Lite functions on a single LAN segment so NetWare Lite packets
DO NOT cross Novell routers (NetWare Lite packets do cross MAC layer
bridges or repeaters). At sites that have an existing NetWare network,
each NetWare Lite network is limited to a single LAN segment of the
network.
If a workstation will use both NetWare Lite and native NetWare (which
requires NETx.COM), load the software in the following order:
__________________________________________________
| SOFTWARE LOADING ORDER |
|__________________________________________________|
| SOFTWARE | SERVER | CLIENT | BOTH |
|_______________________|________|________|________|
| SHARE.EXE | Load | | Load |
|_______________________|________|________|________|
| If using IPXODI load | | | |
| LSL | | | |
| Network board driver| Load | Load | Load |
| IPXODI | | | |
|_______________________|________|________|________|
| If using IPX load the | | | |
| generated IPX file | Load | Load | Load |
|_______________________|________|________|________|
| SERVER.EXE | Load | | Load |
|_______________________|________|________|________|
| CLIENT.EXE | | Load | Load |
|_______________________|________|________|________|
| Log in to the NetWare Lite Network and capture |
| ports and map drives before loading NETx.COM |
|__________________________________________________|
| NETx.COM | Load | Load | Load |
|_______________________|________|________|________|
NOTE: The NetWare Lite Cache can be loaded as a device driver from
CONFIG.SYS or it can be loaded anytime as a TSR.
After installing CLIENT.EXE in a workstation that also uses the
NetWare shell, modify your AUTOEXEC.BAT or appropriate batch file to load
the files in the correct order.
NOTE: The NetWare Shell maps the SYS:LOGIN drive to the drive after
the NetWare Lite LASTDRIVE specified in CONFIG.SYS. If LASTDRIVE is not
set, DOS defaults to drive E:, so drive F: is mapped to SYS:LOGIN.
We recommend using the "MAP *1:=" command in your login
script to map the drive after the specified NetWare Lite LASTDRIVE. If you
use the relative drive mapping (above) instead of the absolute drive
mapping, you wont have to change drive mappings as often if you change your
last drive. However, if certain drives must be mapped to specific letters,
changing LASTDRIVE may change which drive letters are mapped.
All drive letters (A: through Z:) can be mapped to NetWare
servers (NetWare Lite can only map A: through LASTDRIVE).
11. AUXILIARY NETWARE FILES
The following programs are included with NetWare, but are not
documented in the NetWare Lite manual. These programs are not necessary for
NetWare Lite to run, but they add functionality for some situations, and
provide some fun too.
DEDICATE.COM This small program can be run on a dedicated NetWare
Lite server or on NetWare Lite client/servers when the keyboard will not be
used for a while.
DEDICATE.COM improves server performance by polling the
keyboard, keeping SERVER.EXE out of DOS, and letting SERVER.EXE use more
cycles per operation.
To run DEDICATE.EXE, while SERVER.EXE is running, type
DEDICATE and press <Enter>.
DEDICATE.COM remains active until you press a key on the
keyboard.
UPATCH.EXE This is the Universal Patch Program. It applies patches
to target files. For information on NetWare Lite patches, customers in the
U.S. and Canada can call Novell's 24-hour automated fax service at (800)
638-9273. Press the asterisk (*) key at the beginning of the recorded
message.
IPXSYNC.EXE This program can be used to synchronize activity on a
Novell network. The usage is IPXSYNC string [count] (default count: 1).
Include IPXSYNC and a string in any batch files when it is important that a
specific computer is running before the batch file continues execution.
IPXSYNC broadcasts the string until another computer broadcasts the same
string. Then both stations continue running.
Example: If you have three computers on your network and
each computer has a network drive you want to map to, include the string
"IPXSYNC READY 2" in all three computers' STARTNET.BAT files after the
SERVER statement and CLIENT statement and before the drive mappings and
port capture statements. When STARTNET.BAT gets to the "IPXSYNC READY 2"
line, it will not continue the execution until two other computers on the
network are issuing the "READY" message.
NETBIOS.EXE Some applications require NETBIOS.EXE. If an application
requires NETBIOS, load it at the DOS prompt after loading IPXODI and before
loading the application. For more information on NETBIOS.EXE, contact the
nearest Novell Authorized Reseller.
NLSNIPES.EXE This is a game for one to five players. Everyone who
wants to play NLSNIPES must map a drive to the same network directory.
* For instructions on how to move and shoot, type
"NLSNIPES /H" and press <Enter>.
* To run NLSNIPES.EXE, type NLSNIPES. When asked for
your initials, type two initials to identify your sniper.
The first person to run NLSNIPES is the starter. As
others run NLSNIPES and enter their initials, a sniper appears for the
game. When the group is ready to play, the starter presses <Enter> to begin
the game. Move your sniper through the maze killing snipes generators, and
other snipers.
If a "Sharing Violation error..." occurs, press F (Fail)
to clear it and continue. This error can be avoided by typing "NET MAP ..."
and using the mapped drive to a local disk instead of using the local disk
directly.
TASKID.COM This program is used when running Windows 3.0 in real or
standard mode. Copy this program from the NWLITE directory to the
WINDOWS\SYSTEM directory.
TBMI.COM This program is used when running Windows 3.0 in real or
standard mode. Copy this program from the NWLITE directory to the
WINDOWS\SYSTEM directory. Include the command "TBMI" in the STARTNET.BAT
file immediately after the "IPXODI" command.
TBMI2.COM This program is used when running Windows 3.1 in
standard mode. Copy this program from the NWLITE directory to the
WINDOWS\SYSTEM directory. Include the command "TBMI2" in the STARTNET.BAT
file immediately after the "IPXODI" command.
VIPX.386 This program is used when running Windows 3.0 and 3.1 in
enhanced mode. Copy this program from the NWLITE directory to the
WINDOWS\SYSTEM directory.
14. NetWare Lite and Windows
Before Installing Netware Lite and Windows
1. Decide what cache you want to use. NetWare Lite comes with the
NetWare Lite Cache and it is designed to work with NetWare Lite. If you
want to use SMARTDRV or another cache, you MUST turn off the write cache.
WARNING: SMARTDRV's and other caches' write cache must be
turned off because when they "wake up" to do writes in the background, they
do not protect themselves from re-entry with a DOS-critical section
callout. If you use any cache (other than the NetWare Lite Cache) with
deferred writes, posted writes, or queued writes turned on, you may get
random hangs, data corruption, or other abnormal behavior.
WARNING: Do not use SMARTDRV and NetWare Lite Cache at the same
time.
2. If you are going to use the NetWare Lite Cache, edit the
AUTOEXEC.BAT file to remove the SMARTDRV command or the other cache's
command.
3. If you are going to use SMARTDRV or another cache, do the
following:
See the cache's documentation to find out how to turn off
the write cache.
Do not install the NetWare Lite Cache when installing
NetWare Lite.
Installing/Modifying NetWare Lite and Windows
1. Install NetWare Lite.
2. From the DOS prompt (before you start Windows), copy the files
TASKID.COM, TBMI.COM, TBMI2.COM and VIPX.386 from the NWLITE directory to
the WINDOWS\SYSTEM directory on your hard disk.
3. Edit the SYSTEM.INI file in the WINDOWS directory.
Under the [386enh] heading:
UniqueDOSPSP=true
PSPIncrement=5
OverLappedIO=off
TimerCriticalSection=10000
ReflectDOSInt2A=true
Modify the "network=*vnetbios, *dosnet" line to include
"VIPX.386."
Example: network=*vnetbios, *dosnet, VIPX.386
4. Make sure the Windows Setup System Information has the Network
field set to "NO NETWORK INSTALLED."
Do not select "NOVELL NETWARE ..." unless you are also
connected to a native Novell NetWare network (like NetWare v2.2 or NetWare
v3.11). While in the WINDOWS directory, type SETUP and press <Enter>. The
Windows Setup screen appears. Highlight "Network" and press <Enter>.
Highlight "NO NETWORK INSTALLED" and press <Enter>. The Windows Setup
screen appears and the "Complete Changes" field is highlighted. Press
<Enter> to make the change. Press <F3> to exit SETUP.
5. If you are going to use Windows in the REAL or STANDARD mode,
execute the appropriate file (TBMI.COM or TBMI2.COM).
The following matrix shows networking programs needed for
specific DOS and Windows environments. It also specifies if and when to
load the program.
_______________________________________________
| | WINDOWS 3.0 |
|______|________________________________________|
| DOS | REAL | STANDARD | ENHANCED |
|______|_____________|_____________|____________|
|MS DOS|TBMI.COM * |TBMI.COM * |VIPX.386 ***|
| 3.x |TASKID.COM **|TASKID.COM **| |
| 4.x | | | |
| 5.x | | | |
|_____ |_____________|_____________|____________|
|DR DOS|TBMI.COM * |TBMI.COM * |VIPX.386 ***|
| 6.x |TASKID.COM **|TASKID.COM **| |
|______|_____________|_____________|____________|
| WINDOWS 3.1 |
|_______________________________________________|
| DOS | STANDARD | ENHANCED |
|____________________|_____________|____________|
| MS DOS | TBMI2.COM * |VIPX.386 ***|
| 3.x | | |
| 4.x | | |
| 5.x | | |
|____________________|_____________|____________|
| DR DOS | TBMI2.COM * |VIPX.386 ***|
| 6.x | | |
|____________________|_____________|____________|
| |
| * = Include the command "TBMI" or "TBMI2" |
| in the STARTNET.BAT file immediately |
| after the "IPXODI" command. |
| |
| ** = Load immediately after entering a |
| Windows DOS box by typing "TASKID" at |
| the DOS prompt and unload before exiting|
| a Windows DOS box by typing "TASKID U" |
| at the DOS prompt. |
| |
| *** = Make sure VIPX.386 is in the WINDOWS/ |
| SYSTEM directory and the SYSTEM.INI file|
| "network=*vnetbios, *dosnet" line |
| includes "VIPX.386". |
|_______________________________________________|
Before Loading Windows
1. Run STARTNET.BAT to load the NetWare Lite software.
2. Type "NET LOGIN username" and press <Enter> to log in to the
network.
3. Map drives and capture ports to set up your NetWare Lite
environment. For more information on how to map drives and capture ports,
see the manual.
Load Windows
If SYSTEM.INI was not changed as in the "Installing/Modifying
NetWare Lite and Windows" section, NetWare Lite prevents Windows from
loading, displays an error message, and returns you to the DOS prompt. If
SYSTEM.INI was changed, NetWare Lite lets Windows load.
When using Windows
To access directories on a computer's local hard drive using a drive
letter, use the DOS SUBST command instead of the NET MAP command. The
SUBST command is more efficient than the NET MAP command for accessing
directories on a local hard drive. For more information on the SUBST
command, see your DOS documentation.
Don't run the NET utility inside of a DOS box.
When entering a DOS box in real or standard mode, immediately load
TASKID by typing "TASKID" and pressing <Enter> at the DOS prompt.
Just before exiting a DOS box in real or standard mode, unload
TASKID by typing "TASKID U" and pressing <Enter> at the DOS prompt.
If you are running executable (.EXE) command (.COM), or batch (.BAT)
files that execute or spawn other executable, command, or batch files, and
the files shut down, increase Windows' SYSTEM.INI file PSPIncrement value
by increments of 5 until the files don't shut down.
Before Printing in Windows
Turn off the Fast Printing Direct to Port. From the Program Manager
Main window, double click on the Control Panel icon, double click on the
Printers icon, double click on the Connect button, and click on the Fast
Printing to Direct Port box until it does not contain an X.
Get application specific information for Windows from the NetWare
Lite automated fax service. In the U.S. and Canada, call (800)638-9273 and
press the asterisk (*) key at the beginning of the recorded message.