COPYRIGHT (c) 1985 by Novell, Inc. All Rights Reserved.
Local Workstation
Remote Host
Scroll this line
Select
LAN WorkPlace Console
LWPCON
<ALT-F1>
<Enter>
<Esc>
Overview
Interfaces
Protocols
Services
Configuration
Hints
Hostname :
IP Address :
Subnet Mask :
Router :
Interface Name :
Interface Address :
Remote Host
DOS LWP Version
Description Address
Enter Target Hostname :
Change Host
Change target hostname.
Some general information about the target host.
Information about the target host PC.
Information about the network interface(s) available on the target host.
A snapshot of internet protocol statistics from the target host.
SNMP information from the target host.
Enter hostname or IP address of the host you wish to monitor.
Internal Error : %s
Inavlid hostname entered, please re-enter a valid target hostname or an IP address.
PushActiveKeyLine
An error occurred while entering hostname, possibly out of memory while trying to allocate an internal data structure.
The name or address could be resolved at the time of the request because of internal factors. Another attempt to resolve the name maybe successful.
The network name server(s) did not respond to a message. This could mean either that the name server(s) could not resolve the name or address, or the name servers are not functioning. It is possible that the name or address is invalid, please try again.
The RESOLV.CFG file could not be accessed.
The HOSTS file could not be accessed.
There was no entry corresponding to the name or address in the HOSTS file. It is possible that you may have mis-typed, please try again.
The DOS LAN WorkPlace TCP/IP software has not been loaded, please try this operation after doing so.
PushInformationText
Options
Statistics
Tables
Available Options
Traps
PopList
Community Name:
Request Poll Interval:
Request Retry Count:
(seconds)
Reply Timeout Interval:
Host:
ipForwards:
ipReceives:
ipTransmits:
tcpConnects:
tcpReceives:
tcpTransmits:
udpReceives:
udpTransmits:
Uptime:
System Description:
public
LWPCON Options
ICMP Statistics
IP Statistics
TCP Statistics
UDP Statistics
TCP/IP Statistics
TCP/IP Tables
Interface Statistics
Address Translation Table
Interface Table
Local IP Address Table
Routing Table
TCP Connection Table
atIfIndex:.
atNetAddress:.
atPhysAddress:.
PushList
AT table access failed due to:
AT table entry delete failed due to:
Create AT Table Entry
Edit AT Table Entry
AT table entry edit failed due to:
Address Translation Table
<End of Table>
<End of Table - display truncated>
IP Address Mac Address Interface#
Hostname Mac Address Interface#
Invalid hex string, please use xx-xx-xx-xx-xx-xx format.
Invalid target host, please use symbolic name or dotted notation.
ICMP Statistics
icmpInAddrMaskReps:
icmpInAddrMasks:
icmpInDestUnreachs:
icmpInEchoReps:
icmpInEchos:
icmpInErrors:
icmpInMsgs:
icmpInParmProbs:
icmpInRedirects:
icmpInSrcQuenchs:
icmpInTimeExcds:
icmpInTimestampReps:
icmpInTimeStamps:
icmpOutAddrMaskReps:
icmpOutAddrMasks:
icmpOutDestUnReachs:
icmpOutEchoReps:
icmpOutEchos:
icmpOutErrors:
icmpOutMsgs:
icmpOutParmProbs:
icmpOutRedirects:
icmpOutSrcQuenchs:
icmpOutTimeExcds:
icmpOutTimestampReps:
icmpOutTimestamps:
ICMP group access failed due to:
Interface statistics edit failed due to:
IF table access failed due to:
IP group access failed due to:
IP statistics edit failed due to:
Hours
iso88023-csmacd
iso88024-tokenBus
iso88025-tokenRing
iso88026-man
basicIsdn
ddn-x25
ethernet-csmacd
hdh1822
hyperChannel
other
propPointToPointSerial
primaryIsdn
proteon-10MBit
proteon-80MBit
regular1822
rfc877-x25
starLan
t1-carrier
testing
[interface %lu]
ifAdminStatus:
ifDescr:
ifIndex:
ifInDiscards:
ifInErrors:
ifInNUcastPkts:
ifInOctets:
ifInUcastPkts:
ifInUnknownProtos:
ifLastChange:
ifMtu:
ifOperStatus:
ifOutDiscards:
ifOutErrors:
ifOutNUcastPkts:
ifOutOctets:
ifOutQLen:
ifOutUcastPkts:
ifPhysAddress:
ifSpeed:
ifType:
Description Mac Address Interface#
ifAdminStatus
unknown
unspecified
no support
%lu:%.2lu:%.2lu:%.2lu
testing
Minute
Minutes
Second
Seconds
%3lu %-4.4s %2lu %-5.5s %2lu %-7.7s %2lu %-7.7s
IP address table access failed due to:
IP routing table entry create failed due to:
IP routing table entry delete failed due to:
IP routing table entry edit failed due to:
IP routing table access failed due to:
DISABLED
direct
invalid
other
remote
Interface Table
Local IP Address Table
Hostname Address Mask Intf Bcast
IP Address Address Mask Intf Bcast
Destination Next Hop Intf Cost Type
ipRouteTypes
ipRouteAge:
ipRouteDest:
ipRouteIfIndex:
ipRouteMetric1:
ipRouteMetric2:
ipRouteMetric3:
ipRouteMetric4:
ipRouteNextHop:
ipRouteProto:
ipRouteType:
Create IP Routing Table Entry
Edit IP Routing Table Entry
ipRouteDest:
gateway
bbnSpfIgp
ciscoIgrp
es-is
hello
is-is
local
netmgmt
other
direct
invalid
other
remote
default
gateway
ipForwarding
ipDefaultTTL:
ipForwarding:
ipForwDatagrams:
ipFragCreates:
ipFragFails:
ipFragOks:
ipInAddrErrors:
ipInDelivers:
ipInDiscards:
ipInHdrErrors:
ipInReceives:
ipInUnknownProtos:
ipOutDiscards:
ipOutNoRoutes:
ipOutRequests:
ipReasmFails:
ipReasmOKs:
ipReasmReqds:
ipReasmTimeout:
tcpActiveOpens:
tcpAttemptFails:
tcpCurrEstab:
tcpEstabResets:
tcpInSegs:
tcpMaxConn:
tcpOutSegs:
tcpPassiveOpens:
tcpRetransSegs:
tcpRtoAlgorithm:
tcpRtoMax:
tcpRtoMin:
udpInDatagrams:
udpInErrors:
udpNoPorts:
udpOutDatagrams:
bootpc
bootps
chargen
daytime
discard
domain
finger
ftp-data
hostname
iso-tsap
netstat
nicname
quote
supdup
telnet
users
uucp-path
constant
other
closed
closing
closeWait
established
finWait1
finWait2
listen
lastAck
synReceive
synsent
timeWait
Authentication Failure
Cold Start
EGP Neighbor Loss
Enterprise Specific
<Unable to access trap file>
Link Down
Link UP
Warm Start
The trap log file, %s is corrupted.
UNKNOWN ERROR
UNKNOWN OBJECT
Local Host Port Remote Host Port State
Local IP Port Remote IP Port State
Description
PhysicalAddress
Speed
Packets Received
Packets Sent
Inbound Packets Discarded
Outbound Packets Discarded
Inbound Packets With Errors
Outbound Packets With Errors
Maximum Packet Size
Interface #%-lu
IP Address
Subnet Mask
AppendToForm
IP Statistics
ICMP Statistics
TCP Statistics
UDP Statistics
Packets Received
Packets Sent
TCP group access failed due to:
UDP group access failed due to:
Remote Host Overview
Packets Discarded
Packets With Errors
MSG BUILD FAILURE
MSG NAME MISMATCH
MSG ID MISMATCH
BAD OBJ VALUE
MSG PARSE FAILURE
REPLY MSG TOO BIG
Invalid key Pressed.
Memory allocation failure.
TCP connection table access failed due to:
SNMP GENERAL ERROR
MEMORY SHORTAGE
Hostname Trap Type Timestamp
IP Address Trap Type Timestamp
NO HOST RESPONSE
READ ONLY ACCESS
MSG SEND TRUNCATED
Delete Trap Log?
HOST UNAVAILABLE
The value must be between %lu and %lu inclusive.
UDP socket bind failed.
UDP socket ioctl failed.
UDP socket connect failed.
Socket allocation failed.
The program was unable to access the statistics from the local TCP/IP software.
TCP/IP information and statistics pertaining to the local workstation.
TCP/IP information and statistics pertaining to the remote host.
Available services: Echo Test, Name Resolver, Domain Name System information and Trace Route.
Edit configuration file.
The LSL module is not loaded at this time, please try this operation after doing so.
LINKSUP$
Not Available
Overview variables access failed due to:
Echo Test
Network News Transfer Protocol
Query Name Service
Tests if the specified host responds to the ICMP protocol's mandatory ECHO_REQUEST datagrams.
Canonical Name (CNAME), Host Information (HINFO) and Well Known Services (WKS), information from the Domain Name System.
Given a host (and an optional domain name ending with a period), supplies information about it from the Domain Name System.
Delay Time :
Packet Size :
Number Of Packets :
Number of seconds delay between each packet, default = 0, maximum = 3600.
The size of packet(s) to send default = 64 bytes, maximum = 4096 bytes.
The number of packets to send default = 1, continuous = 0.
Enter the name or IP address of the host you wish to test.
Host Name :
Echo Test
Press <Enter> key to run echo test.
RUN TEST
Packets Sent :
Packets Received :
Host %s is alive
No response from host : %s
Error sending an echo packet.
Error receiving an echo packet.
Trip Time :
Packet Loss :
Minimum Time :
Maximum Time :
Average Time :
Press <Esc> to stop or return.
Host Up ?
Enter Hostname Or IP Address :
Services
Could not resolve host: %s
%s@%s
PING host to see if it is up.
Local WorkStation writes unsupported.
LOCAL_ACCESS_FAILED : Unable to access local WorkStation information.
Local host information is not available because LWPCON is incompatible with this version of TCPIP.EXE.
Identifies the canonical name of an alias.
Identifies CPU and OS used by a host.
Identifies the well known services supported by a particular protocol on the host.
Error initialising Domain Name System.
Domain Name System query error.
Error in sending Domain Name System query.
Error in Domain Name System query reply.
Highlight an entry and press <Enter> to see if that service is active.
Default Domain :
Local Workstation Options
Alias :
Canonical Name :
Authoritative Servers :
Error in size of packet received in response to a Domain Name System query.
AppendToList
CPU :
Operating System :
Host Address
<Press Enter for List>
TCP port #%-u is active.
Reserved
Unassigned
Remote Job Entry
Discard
Active Users
Daytime
Who is up or NETSTAT
Quote of the day
Character Generator
File Transfer Protocol (data)
File Transfer Protocol
Terminal Connection
Simple Mail Transport Protocol
Resource Location Protocol
Host Name Server
Who is
Domain Name Server
Bootstrap Protocol Server
Bootstrap Protocol Client
Trivial File Transfer
Private Dial Out Service
Private RJE service
Finger
SUPDUP Protocol
NIC Host Name Server
ISO-TSAP
Authentication Server
UUCP Path Service
Network Time Protocol
Address Protocol Port# Service
To see the list of servers that supply an authoritative answer : <Press Enter>.
This is a list of servers that will supply an authoritative answer.
To see the list of Well Known Services : <Press Enter>
This is a list of Well Known Services supported by the host.
ComputePortalPosition
Socket Identifier :
Send Queue (bytes) :
Receive Queue (bytes) :
Additional Information
Delete Socket ?
Delete All Marked Sockets ?
<Delete>
Delete item.
Mark item.
TCP/IP MIB information tables.
The name server refuses to perform the specified operation for policy reasons.
The name server does not support the requested kind of query.
The domain name refrenced does not exist.
The name server was unable to process this query due to a problem with the name server.
The name server was unable to interpret the query.
Well Known Services :
Error Occurred
Display Name Server IP Addresses
Check Active TCP Services
%s is active.
%s is not active.
Remote Host Options
Local Workstation Overview
Remote Host Protocol Statistics
Local Workstation Protocol Statistics
Services Options
Name Service Information
Name Server IP Addresses
List of TCP Services
List of name server IP addresses from RESOLV.CFG.
Display some of the TCP services, to check whether they are active.
Enter a TCP port number :
Other
TCP port #%-u is not active.
Trace Route
Trace packet route from the current workstation to destination host.
Hop# Hostname IP Address Time
List of gateway names/addresses and the round trip time.
(.txt)