home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Encyclopedia 96-1
/
novell-nsepro-1996-1-cd2.iso
/
download
/
netware
/
nconfg.exe
/
NCONFG.TXT
next >
Wrap
Text File
|
1993-09-17
|
2KB
|
65 lines
NOVELL TECHNICAL INFORMATION DOCUMENT
TITLE: Updated NCONFIG.EXE for NetWare 2.2
DOCUMENT ID: TID000204
DOCUMENT REVISION: A
DATE: 01JUL93
ALERT STATUS: Yellow
INFORMATION TYPE: Symptom Solution
README FOR: NCONFG.EXE
NOVELL PRODUCT and VERSION:
NetWare 2.2
ABSTRACT:
This version of NCONFIG.EXE addresses a problem using the -M option with
the NetWare 2.2 INSTALL.EXE program. The traditional naming convention for
LAN drivers is to use A, B, C, or D as the first letter in the name of the
LAN driver. If this naming convention was not followed, the previous
version of NCONFIG.EXE (v1.0) would display an error message when
attempting to use INSTALL -M.
_________________________________________________________________
DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL.
NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION.
HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY. NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.
_________________________________________________________________
Self-Extracting File Name: NCONFG.EXE
Files Included Size Date Time
NCONFG.TXT (This File)
NCONFIG.EXE 124499 2-12-92 9:55a
README FILE FOR NCONFIG.EXE V1.1
This readme file accompanies NCONFIG.EXE V1.1 for NetWare v2.2.
This version of NCONFIG.EXE addresses a problem using the -M option with
the v2.2 INSTALL.EXE program. The traditional naming convention for LAN
drivers is to use A, B, C, or D as the first letter in the name of the LAN
driver. If this naming convention was not followed, the previous version
of NCONFIG.EXE (V1.0) would display the following message when attempting
to use INSTALL -M:
"Lan Driver Description file for <NETWORK BOARD> cannot be found.
Will not show up in OS generation screen."
NCONFIG.EXE V1.1 does not require the LAN driver to have A , B, C, or D
included anywhere in the name.
INSTALLATION:
To use NCONFIG.EXE V1.1 make sure you have a backup copy of NCONFIG.EXE.
Then replace the old one on the SYSTEM-1 diskette or directory (depending
on whether you use the diskette or hard disk method) with the new
NCONFIG.EXE V1.1.
NCONFIG.EXE will then be used by INSTALL the next time it is run.