home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Encyclopedia 96-1
/
novell-nsepro-1996-1-cd2.iso
/
download
/
netware
/
l11f01.exe
/
FIELDTST
/
FIELDTST.TXT
next >
Wrap
Text File
|
1994-02-24
|
3KB
|
77 lines
Readme for FIELDTST directory
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
WARNING: DO NOT APPLY ALL THESE PATCHES, UNLESS YOU HAVE BEEN INSTRUCTED TO
DO SO BY NOVELL TECHNICAL SUPPORT PERSONNEL.
Please Note: These files have not been through the patch test team.
***********************************************************************
**************************** FRENCH ***********************************
STACKFIX.PAT 973 30-03-93 10:17a
TCSFIX.PAT 1073 08-06-93 1:10p
WNET.EXE 504320 10-29-93 11:18a
WNETRES.DLL 24576 10-29-93 3:29p
NLPLIB.DLL 58480 01-05-93 1:59p
*************************************************************************
INFORMATIONS SUR LES CORRECTIONS SPECIFIQUES (FRENCH)
************************************************************************
STACKFIX.PAT - NetWare Lite Server stack fix patch.
Target: SERVER.EXE
Problem: The server switches to its DOS reentrency stack during
initialization. The Norton antivirus device driver
interrupts the server after initialization and does some
work. The server timer interrupt then kicks in,
switches to the top of the server DOS reentrency stack
and corrupts the data that the server had on the stack
before the timer interrupt.
Symptoms: When the Norton antivirus device driver is loaded and
SERVER.EXE attempts to load, the server will hang.
****************************************************************************
TCSFIX.PAT - NwtWare Lite Server TimerCriticalSection=100 patch
File: SERVER.EXE
Checksums: A1, 145, 74, 165, 64, 40
Problem: Some software/hardware will not function properly (according to
their manufacturers) under Windows if the TimerCriticalSection
setting under the [386Enh] section of the SYSTEM.INI file is
set too high. This patch forces the NetWare Lite SERVER.EXE to
allow the TimerCriticalSection to be set as low as 100 to
accomodate these special circumstances.
Symptoms: Software/hardware fails to function properly under Windows and
the manufacturer states that the reason is that the
TimerCriticalSection is set too high.
*****************************************************************************
WNET.EXE:
Note: This is not the complete WNET utility, only two files have been
updated. You should use these only if you currently have WNET.
Symptom: This new file fixes the problem where WNET doesn't release
the windows resources after exiting WNET. Also fixes the problem
with creating Network directories with spaces in them.
Instructions:
Copy the WNET.EXE and WNETRES.DLL file into your \NWLITE subdirectory, overwriting
THE existing WNET.EXE file. Copy the NLPLIB.DLL into your \Windows subdirectory,
overwriting the exisiting NLPLIB.DLL file. Restart Windows and run the WNET
utility.
*****************************************************************************