home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Encyclopedia 96-1
/
novell-nsepro-1996-1-cd2.iso
/
download
/
netware
/
hpt009.exe
/
HPT009.TXT
< prev
next >
Wrap
Text File
|
1995-03-13
|
8KB
|
222 lines
NOVELL TECHNICAL INFORMATION DOCUMENT
TITLE: HPT009.EXE;HostPrint Maint. on 4.1 Server
DOCUMENT ID: TID251078
DOCUMENT REVISION: B
DATE: 10MAR95
ALERT STATUS: Yellow
INFORMATION TYPE: Symptom Solution
README FOR: HPT009.EXE
NOVELL PRODUCT and VERSION:
NetWare HostPrint 1.1
ABSTRACT:
If HostPrint 1.1 is installed in a NetWare 4.1 server, HPT009.EXE is the
current Maintenance Patch. If HostPrint is in a NetWare 4.01 server or a
NetWare 3.1x server, download the HPT006 series instead.
-----------------------------------------------------------------
DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL. NOVELL
MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION. HOWEVER, THE
INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION ONLY. NOVELL
MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS INFORMATION.
-----------------------------------------------------------------
SYMPTOM
- CSCON was unable to support a selection list of more than 50 print jobs,
when HostPrint is running on NetWare 4.0x.
- HPCONSOL crashed when more than 20 print jobs were defined.
- HPCONSOL would fail in large HostPrint environments due to size of buffer
allocated to HPCONSOL.
- HPOBJECT failed when the NetWare server had the Accounting option installed
and the Account Balance activated.
- An extra Form Feed and a PostScript error was issued at the end of a
HostPrint print job.
- The server could ABEND in large HostPrint environments due to the way Host
Print was handling thread switching.
- When Host Print 1.1 was installed, SAACOPY was overwritten with an older
version that doesn't support the option to backup or restore profiles to or
from DOS or Netware partitions.
SOLUTION
Apply HPT009.
Self-Extracting File Name: HPT009.EXE Revision: B
Files Included Size Date Time
\
HPT009.TXT (This File)
NW410.TXT 641 02-06-95 3:54p
ACP437.XLT 512 08-17-94 9:36a
ACP850.XLT 512 08-17-94 9:36a
ACP860.XLT 512 08-17-94 9:36a
ACP862.XLT 512 08-17-94 9:36a
ACP863.XLT 512 08-17-94 9:36a
ACP864.XLT 512 08-17-94 9:36a
ACP865.XLT 512 08-17-94 9:36a
ECP420.XLT 448 10-02-91 5:08p
ECP424.XLT 448 10-02-91 5:08p
PSLAND.INI 4209 03-15-94 5:33p
PSPORT.INI 4199 03-15-94 4:13p
SAACON.EXE 318614 08-17-94 11:36a
HOSTPRT.001 880 03-10-95
HOSTPRT.NLM 74797 09-26-94 4:35p
HOSTPRT.NNN 75797 09-26-94 4:35p
HOSTPRT.RMV 1003 01-26-95 2:51p
PRODUCT.DEF 253 01-26-95 11:11a
SAACOPY.EXE 262121 09-26-94 3:55p
SPC_FRM.HLP 67975 10-11-93 5:15p
CSINSTAL.HLP 2336 03-09-93 6:44p
CSSYSMSG.NLM 43893 12-13-94 4:29p
HPCONFRM.HLP 9411 05-20-93 1:35a
HPCONSOL.EXE 213677 10-27-94 1:38p
HPOBJECT.EXE 15917 12-21-93 1:22p
HPUPDATE.NLM 4699 11-05-93 8:34a
PINSTALL.NLM 130785 12-13-94 5:22p
SACONFRM.FRM 22407 11-08-93 11:58a
SACONFRM.HLP 73353 11-08-93 5:16p
\NLS\4\
CSSYSMSG.HLP 3302 05-18-93 3:49p
CSSYSMSG.MSG 11605 12-13-94 4:12p
PINSTALL.HLP 2799 05-26-94 7:41p
PINSTALL.MSG 12786 12-13-94 5:05p
Installation Instructions:
HPT009 requires:
- That HostPrint has been installed in a NetWare 4.1 server. (If it is on a
4.0x or 3.1x server, download HPT006.EXE instead.)
- NetWare for SAA 1.3.42.
---- *IF* your NetWare for SAA is not, at least, V1.3.0, you must purchase an
upgrade.
---- *IF* you have a version of NetWare 1.3 below v1.3.42 (1.3B), you must
upgrade (see PTF410.EXE).
- HostPrint 1.1
NOTE: It is vital that you read all 16 steps below!
I. Create a directory on the NetWare 4 server called PATCH.
II. Create 1 subdirectory under it:
- DISK1
III. Put HPT009.EXE into the DISK1 subdirectory.
IV. Type HPT009 to unzip HPT009.EXE.
V. *IF* you will be managing HostPrint with NetWare for SAA Services Manager
(SSM):
- Create a DISK2 subdirectory.
- Put HPT004.EXE into it.
- Unzip HPT004 HPT004 <enter>
- Install HPT004.EXE on the workstation as follows:
--- A. Start Windows WIN <enter>
--- B. Select FILE/RUN under Program Manager.
--- C. RUN PATCH\DISK2\SETUP.EXE
--- D. From "NetWare for SAA Service Manager Setup", select the "Add Services"
option.
--- E. You will be notified when installation is complete.
VI. The server must be active but COMMEXEC.NLM must not be running.
-- A. UNLOAD HOSTPRT (If already loaded).
-- B. CSDOWN.
---C. UNLOAD COMMEXEC (to make sure it is unloaded).
-- C. LOAD INSTALL.
-- D. Select "Install a product not listed".
-- E. Press <F3> to specify a different path
-- F. Enter the correct path to the DISK1 directory, the install program will
install the appropriate files from the DISK1 directory as applicable.
For example:
SYS:\PATCH\DISK1
INSTALL will inform you when installation of the PTF series is complete.
VII. Verify installation of HPT009:
- A. Load INSTALL.
- B. Select "View/Configure/Remove installed products" option.
- C. Select the "Currently Installed Products" option.
- D. HostPrint should be at Version 1.10.10.
VIII. Login to the NetWare HostPrint server as ADMIN.
IX. Insure you are in the same Bindery Context as the file server where
HostPrint is installed, with a search drive mapping to SYS:PUBLIC.
X. Run HPDEF. (see page 2-2 of the Administration Guide for complete
information)
XI. Run PRINTDEF: Refer to the NetWare HostPrint Administration Guide,
starting on PAGE 2-18, STEP NO.4 and follow the program prompts.
The PRINTDEF database file PRINTDEF.DAT will be created/updated in
the SYS:\PUBLIC subdirectory when PRINTDEF "Import Print Devices" is
executed.
XII. Run PRINTCON: Refer to the NetWare HostPrint Administration Guide,
starting on PAGE 2-22 and follow the program prompts.
XIII. Login as SUPERVISOR /b, and run PRINTCON on any 4.x servers you will be
sending HostPrint, print jobs to. The PRINTCON database file PRINTJOB.DAT
will be created/updated in the SYS:\PUBLIC subdirectory when PRINTCON is
executed.
XIV. Login as SUPERVISOR, and run PRINTCON on any 3.x servers you will be
sending HostPrint, print jobs to. The PRINTCON database file PRINTJOB.DAT
will be created/updated in the SYS:\PUBLIC subdirectory when PRINTCON is
executed.
NOTE: Any print jobs which were configured with/on a 3.1x server with
PRINTCON, can no longer be used.
Patch History:
HPT009 supersedes the HPT001-HPT005 series (relative to a NetWare 4.1
installation only.
Solution Specifics:
After HPT009 is applied:
1. CSCON will now support a selection list of more than 50 print jobs.
2. HPCONSOL will now support more than 20 defined print jobs.
3. HPCONSOL has increased buffer capacity to support the maximum field lengths
in server, print server, print queue, and print job names.
4. HPOBJECT will now support NetWare servers with Accounting installed and the
Account Balance assigned.
5. PostScript HostPrint jobs will now print without an extra form feed at the
end of the print job and without a PostScript error report to the printer.
6. The new HOSTPRT.NLM corrects the way in which Host Print handles thread
switching making it stable in large environments.
8. The correct version of SAACOPY will now be copied to the
SYS:SYSTEM\NWSAA\SAACOPY
subdirectory restoring functionality of the updated SAACOPY.
----------------------------------------------------------------
Any trademarks referenced in this document are the property of their
respective owners. Consult your product manuals for complete trademark
information.
-----------------------------------------------------------------