home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Encyclopedia 96-1
/
novell-nsepro-1996-1-cd2.iso
/
download
/
netware
/
386dcb.exe
/
386DCB.TXT
next >
Wrap
Text File
|
1993-09-17
|
3KB
|
80 lines
NOVELL TECHNICAL INFORMATION DOCUMENT
TITLE: DCB Disk Driver for NetWare 386
DOCUMENT ID: TID000019
DOCUMENT REVISION: A
DATE: 01JUL93
ALERT STATUS: Yellow
INFORMATION TYPE: Symptom Solution
README FOR: 386DCB.EXE
NOVELL PRODUCT and VERSION:
NetWare Pre 3.11 and 2.2
ABSTRACT:
This file contains the DCB.DSK file. This file has a DOC file that gives
information concerning the use of the new DCB.DSK disk driver with drives
set up as Generic SCSI. This is a completely rewritten driver, not a
patched version of the earlier driver.
_________________________________________________________________
DISCLAIMER
THE ORIGIN OF THIS INFORMATION MAY BE INTERNAL OR EXTERNAL TO NOVELL.
NOVELL MAKES EVERY EFFORT WITHIN ITS MEANS TO VERIFY THIS INFORMATION.
HOWEVER, THE INFORMATION PROVIDED IN THIS DOCUMENT IS FOR YOUR INFORMATION
ONLY. NOVELL MAKES NO EXPLICIT OR IMPLIED CLAIMS TO THE VALIDITY OF THIS
INFORMATION.
_________________________________________________________________
Self-Extracting File Name: 386DCB.EXE
Files Included Size Date Time
386DCB.TXT (This File)
DCB.DSK 17331 2-06-90 11:36a
Novell encourages all users to use this newer DCB.DSK disk driver! This is
not a patched version of the old driver, this is a completely re-written
driver. ***PLEASE READ THE FOLLOWING INFORMATION BEFORE USING THIS NEW
DCB.DSK DISK DRIVER!***
When a NetWare 386 partition is created with a drive type defined as
Generic SCSI under the older DCB.DSK disk driver (date 08/03/89 - file size
16034) and you upgrade to the new DCB.DSK disk driver (date 02/06/90 - file
size 17331) you will not be able to mount the volume(s) on that partition.
When attempting to mount the volume(s) you will receive the error: "There
are no accessible disk drives with NetWare partitions...". When you load
the install NLM, and go into "Disk Options", "Partition Tables", you will
receive the following error: "NetWare 386 partition relative sector 32 and
size XXXXX do not match the ending cylinder XXX, head XX, sector XX". You
will need to select "Create NetWare Partition" and create a new partition
using the new DCB.DSK driver mentioned above.
***PLEASE MAKE SURE THAT YOU HAVE A CURRENT BACKUP OF ALL DATA CONTAINED ON
THE DRIVE(S) BEFORE CREATING THE NEW PARTITION, AS CREATING A NEW PARTITION
WILL DESTROY ALL EXISTING DATA, BINDERIES AND TRUSTEE ASSINGMENTS
INCLUDED!***
After creating the new partition and volume(s), you can log in to the
server and restore all backed up data.
These changes made to the heads, sectors and cylinders (partion table
information) were made to adhere as closely as possible to the industry
standard partition table information that applies to devices that cannot
report heads, sectors and cylinders.
We re-emphasize, this applies to GENERIC SCSI ONLY.
May we also re-emphasize that Novell has never claimed that the Generic
SCSI option would successfully interface with all SCSI type hard drives,
nor do we support it that way.
The best option for interfacing larger drives is to purchase a drive from a
drive manufacture that has a NetWare Ready stamp (indicating the heads,
sectors and cylinders) on the drive when shipped from the manufacture and
selecting the NetWare ready option in Disk Set. This option applies to
NetWare 386 only!