home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Network Support Encyclopedia 96-1
/
novell-nsepro-1996-1-cd2.iso
/
download
/
netware
/
310pt1.exe
/
PATCHMAN.DOC
< prev
next >
Wrap
Text File
|
1992-04-17
|
4KB
|
74 lines
This README file accompanies PATCHMAN.NLM v1.20b. The following files
are included for this revision:
PATCHMAN.NLM 6550 02-05-91 10:16am
PATCHMAN.DOC (This file)
This version of PATCHMAN replaces any and all previous versions of
PATCHMAN.NLM for NetWare 386 v3.10. Any patches for Netware v3.10
released after February 1, 1991, will require this version of PATCHMAN
in order to load. Patches written prior to February 1, 1991 will
also load using version 1.20b of PATCHMAN.
PATCHMAN.NLM is the Patch Manager that tracks and manages all
official patches for NetWare 386 v3.10a.
Patches for NetWare 386 v3.10a consist of three types:
DYNAMIC -- Dynamic patches are implemented as .NLM files that
can be loaded/unloaded while the server is running. Unloading
a dynamic patch will restore the Operating System to its
original "unpatched" state.
SEMI-STATIC -- Semi-static patches can also be loaded while
the server is running, however they cannot be unloaded. It is not
possible to undo the effects of a semi-static patch without first
downing the server and bringing it back up without loading the
semi-static patch.
STATIC -- A static patch is a DOS executable program that
modifies the SERVER.EXE file. This type of patch is applied
once and its effects are permanent. It is suggested that a
backup of the original SERVER.EXE file be made before applying
a static patch. (Do not patch the SERVER.EXE on your original
distribution diskette!)
Dynamic and semi-static patches modify the Operating System in
memory, not to disk. This means that dynamic and semi-static
patches must be loaded each time the Operating System is brought up
in order for any 'fixes' to take effect. It is recommended that the
command "LOAD <patch>" be placed in the file server's AUTOEXEC.NCF
file to ensure that the patch is always loaded when the server is
booted up.
In order to see which patches are currently loaded on the system, type
"PATCHES" at the file server console. The patches will then be
grouped and displayed according to their type (i.e. - STATIC, SEMI-STATIC,
or DYNAMIC). Typing "MODULES" at the server console will show you which
Dynamic patches have been loaded.
The Patch Manager (PATCHMAN.NLM) must be loaded before any dynamic
or semi-static patches can be loaded. If PATCHMAN is not already
loaded, the <patch>.NLM will attempt to locate PATCHMAN and, if
found, will load it automatically. PATCHMAN only needs to be
loaded once; all .NLM patches can then be loaded. PATCHMAN cannot
be unloaded until all patches that rely on patchman are first unloaded.
*****************************************************************
DISCLAIMER
Novell, Inc. makes no representations or warranties with respect to
any NetWare software, and specifically disclaims any express or
implied warranties of merchantability, title, or fitness for a
particular purpose.
Distribution of any NetWare software is forbidden without the
express written consent of Novell, Inc. Further, Novell reserves
the right to discontinue distribution of any NetWare software.
Novell is not responsible for lost profits or revenue, loss of use
of the software, loss of data, costs of re-creating lost data, the
cost of any substitute equipment or program, or claims by any party
other than you. Novell strongly recommends a backup be made before
any software is installed. Technical support for this software
may be provided at the discretion of Novell.
*****************************************************************