home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
ftp.whtech.com
/
ftp.whtech.com.tar
/
ftp.whtech.com
/
Geneve
/
mdos
/
geneve_manual&mdos_docs
/
1readme.txt
next >
Wrap
Text File
|
2006-10-19
|
2KB
|
53 lines
11/1/94 UPDATED GENEVE MANUAL FOR MDOS V 2.00
The archives with this file are a revised GENEVE manual for MDOS
Version 2.00. They were taken from the original GENEVE Manual
and from Beery Miller's Update files to MDOS V 2.00. The
original files are used by permission from the copyright owners,
9640 News Contributors, Beery Miller, and are given by me as a
gift to the GENEVE community. I expect no compensation for the
considerable revision and testing done, but I would like to have
errors reported to me either at the address below or through
Beery's BBS (9640 News).
The files are formatted to print from the text editor of MY-WORD
and contain a few CR's and all necessary FF's (PA's). No other
control characters are included except that in order to have a
punching margin on the left, they need to be printed in Elite
type (12CPI) with an added left margin of 10. The printer codes
for this are included on the first line of the first file for
Epson compatible printers. If your printer codes are different
you will have to change this line. If the printer is not shut
off between file loading all files will conform, otherwise the
codes may need to be repeated.
The files are as follows:
PART 1
-README this file
GMAN1
GMAN2
GMAN3
GMAN4
PART 2
-README this file
GMAN5
GMAN6
GMAN7
GMAN8
GMAN9
I believe these to be accurate but make no claims as to total
accuracy, especially since I don't have an HFDC to test some of
the commands. As I said before, I would like to be kept
informed of necessary corrections through Beery's BBS or to the
following address:
Jack Miller
2990 Maidstone Avenue
Trenton, MI 48183
ÇÉÇ╨ïɃ⌐│╜╟╒╒╒╒╒╒╒╒╒ÇÉ