Usenet 1994 January

home *** CD-ROM | disk | FTP | other *** search

/ Usenet 1994 January / usenetsourcesnewsgroupsinfomagicjanuary1994.iso / sources / unix / volume21 / p2c / part04 < prev next >

Wrap

Internet Message Format | 1990-04-05 | 49.7 KB

Subject: v21i049: Pascal to C translator, Part04/32 Newsgroups: comp.sources.unix Approved: rsalz@uunet.UU.NET X-Checksum-Snefru: 486b3823 1a37e96d 9c306c2d 0ab06d9b Submitted-by: Dave Gillespie <daveg@csvax.caltech.edu> Posting-number: Volume 21, Issue 49 Archive-name: p2c/part04 #! /bin/sh # This is a shell archive. Remove anything before this line, then unpack # it by saving it into a file and typing "sh file". To overwrite existing # files, type "sh file -c". You can also feed this as standard input via # unshar, or by typing "sh <file", e.g.. If this archive is complete, you # will see the following message at the end: # "End of archive 4 (of 32)." # Contents: HP/import/iodecl.imp HP/include/sysdevs.h # examples/basic.doc examples/cref.p # Wrapped by rsalz@litchi.bbn.com on Mon Mar 26 14:29:28 1990 PATH=/bin:/usr/bin:/usr/ucb ; export PATH if test -f 'HP/import/iodecl.imp' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'HP/import/iodecl.imp'\" else echo shar: Extracting \"'HP/import/iodecl.imp'\" $11318 characters$ sed "s/^X//" >'HP/import/iodecl.imp' <<'END_OF_FILE' X X X{IncludeFrom=iodeclarations <p2c/iodecl.h>} X X X{*VarStrings=0} {*ExportSymbol=P_%s} {*Export_Symbol=%s} X X XMODULE IODECLARATIONS; XIMPORT sysglobals; X XEXPORT X X CONST X iominisc = 0 ; X iomaxisc = 31; X minrealisc = 7 ; X maxrealisc = 31; X X io_line_feed = CHR(10); X io_carriage_rtn = CHR(13); X X ioescapecode = -26; X X ioe_no_error = 0; X ioe_no_card = 1; X ioe_not_hpib = 2; X ioe_not_act = 3; X ioe_not_dvc = 4; X ioe_no_space = 5; X ioe_no_data = 6; X ioe_bad_tfr = 7; X ioe_isc_busy = 8; X ioe_buf_busy = 9; X ioe_bad_cnt = 10; X ioe_bad_tmo = 11; X ioe_no_driver = 12; X ioe_no_dma = 13; X ioe_no_word = 14; X ioe_not_talk = 15; X ioe_not_lstn = 16; X ioe_timeout = 17; X ioe_not_sctl = 18; X ioe_rds_wtc = 19; X ioe_bad_sct = 20; X ioe_crd_dwn = 21; X ioe_eod_seen = 22; X ioe_misc = 23; X X ioe_sr_toomany = 304; X ioe_dc_fail = 306; X ioe_dc_usart = 313; X ioe_dc_ovfl = 314; X ioe_dc_clk = 315; X ioe_dc_cts = 316; X ioe_dc_car = 317; X ioe_dc_act = 318; X ioe_dc_conn = 319; X ioe_dc_conf = 325; X ioe_dc_reg = 326; X ioe_dc_rval = 327; X ioe_sr_fail = 353; X X no_isc = 255; X X gtl_message = CHR( 1 ); X sdc_message = CHR( 4 ); X ppc_message = CHR( 5 ); X get_message = CHR( 8 ); X tct_message = CHR( 9 ); X llo_message = CHR( 17 ); X dcl_message = CHR( 20 ); X ppu_message = CHR( 21 ); X spe_message = CHR( 24 ); X spd_message = CHR( 25 ); X unl_message = CHR( 63 ); X unt_message = CHR( 95 ); X ppe_message = CHR( 96 ); X ppd_message = CHR(112 ); X X talk_constant = 64; X listen_constant = 32; X X no_card = 0 ; X other_card = 1 ; X X system_card = 2 ; X hpib_card = 3 ; X gpio_card = 4 ; X serial_card = 5 ; X graphics_card = 6 ; X srm_card = 7 ; X bubble_card = 8 ; X eprom_prgmr = 9 ; X X hp98628_dsndl = -7; X hp98629 = -6; X hp_datacomm = -5; X hp98620 = -4; X internal_kbd = -3; X internal_crt = -2; X internal_hpib = -1; X X no_id = 0; X X hp98624 = 1; X hp98626 = 2; X X hp98622 = 3; X hp98623 = 4; X hp98625 = 8; X hp98628_async = 20; X hpGATOR = 25; X hp98253 = 27; X hp98627 = 28; X hp98259 = 30; X hp98644 = 66; X X X X TYPE X type_isc = iominisc..iomaxisc ; X type_device = iominisc..iomaxisc*100+99; X io_bit = 0..15 ; X io_byte = 0..255 ; X io_word = -32768..32767 ; X io_string = X STRING[255]; X io_proc_type = PROCEDURE; X errlnk_type = PROCEDURE ( errorcode : INTEGER ; VAR s : io_string ); X X type_of_card = io_word; X type_card_id = io_word; X X X X X type_hpib_addr = 0..31 ; X type_hpib_line = ( ren_line , X ifc_line , X srq_line , X eoi_line , X nrfd_line , X ndac_line , X dav_line , X atn_line X ) ; X X X X X type_parity = ( no_parity , X odd_parity , X even_parity , X zero_parity , X one_parity X ); X type_serial_line= ( rts_line , X cts_line , X dcd_line , X dsr_line , X drs_line , X ri_line , X X dtr_line X ); X X X X io_proc = PROCEDURE ( temp : ANYPTR ); X io_proc_c = PROCEDURE ( temp : ANYPTR; v : CHAR ); X io_proc_vc = PROCEDURE ( temp : ANYPTR; VAR v : CHAR); X io_proc_w = PROCEDURE ( temp : ANYPTR; v : io_word ); X io_proc_vw = PROCEDURE ( temp : ANYPTR; VAR v : io_word ); X io_proc_s = PROCEDURE ( temp : ANYPTR; reg : io_word ; X v : io_word ); X io_proc_vs = PROCEDURE ( temp : ANYPTR; reg : io_word ; X VAR v : io_word ); X io_proc_l = PROCEDURE ( temp : ANYPTR; line : io_bit ); X io_proc_vl = PROCEDURE ( temp : ANYPTR; line : io_bit ; X VAR v : BOOLEAN ); X io_proc_vb = PROCEDURE ( temp : ANYPTR; VAR v : BOOLEAN ); X io_proc_ptr = PROCEDURE ( temp : ANYPTR; v : ANYPTR ); X X drv_table_type = RECORD X iod_init : io_proc ; X iod_isr : ISRPROCTYPE ; X iod_rdb : io_proc_vc ; X iod_wtb : io_proc_c ; X iod_rdw : io_proc_vw ; X iod_wtw : io_proc_w ; X iod_rds : io_proc_vs ; X iod_wtc : io_proc_s ; X iod_end : io_proc_vb ; X iod_tfr : io_proc_ptr ; X iod_send : io_proc_c; X iod_ppoll : io_proc_vc ; X iod_set : io_proc_l ; X iod_clr : io_proc_l ; X iod_test : io_proc_vl ; X END; X X X X io_funny_proc = RECORD X CASE BOOLEAN OF X TRUE: ( real_proc : io_proc ); X FALSE: ( dummy_pr : ANYPTR ; dummy_sl : ANYPTR ) X END; X X io_temp_type = PACKED RECORD X myisrib : ISRIB ; X user_isr : io_funny_proc; X user_parm : ANYPTR ; X card_addr : ANYPTR ; X in_bufptr : ANYPTR ; X out_bufptr: ANYPTR ; X eirbyte : CHAR ; X my_isc : io_byte ; X timeout : INTEGER ; X addressed : io_word ; X drv_misc : ARRAY[1..32] OF CHAR ; X END; X X io_temp_type2 = PACKED RECORD X myisrib : ISRIB ; X user_isr : io_funny_proc; X user_parm : ANYPTR ; X card_addr : ANYPTR ; X in_bufptr : ANYPTR ; X out_bufptr: ANYPTR ; X eirbyte : CHAR ; X my_isc : io_byte ; X timeout : INTEGER ; X addressed : io_word ; X drv_misc : ARRAY[1..128] OF CHAR ; X END; X X io_temp_type3 = PACKED RECORD X myisrib : ISRIB ; X user_isr : io_funny_proc; X user_parm : ANYPTR ; X card_addr : ANYPTR ; X in_bufptr : ANYPTR ; X out_bufptr: ANYPTR ; X eirbyte : CHAR ; X my_isc : io_byte ; X timeout : INTEGER ; X addressed : io_word ; X drv_misc : ARRAY[1..160] OF CHAR ; X END; X X io_temp_type4 = PACKED RECORD X myisrib : ISRIB ; X user_isr : io_funny_proc; X user_parm : ANYPTR ; X card_addr : ANYPTR ; X in_bufptr : ANYPTR ; X out_bufptr: ANYPTR ; X eirbyte : CHAR ; X my_isc : io_byte ; X timeout : INTEGER ; X addressed : io_word ; X drv_misc : ARRAY[1..164] OF CHAR ; X END; X X X pio_tmp_ptr = ^io_temp_type; X X X isc_table_type = RECORD X io_drv_ptr: ^drv_table_type; X io_tmp_ptr: pio_tmp_ptr; X card_type : type_of_card; X user_time : INTEGER; X card_id : type_card_id; X card_ptr : ANYPTR; X END; X X X X user_tfr_type = ( dummy_tfr_1 , X serial_DMA , X serial_FHS , X serial_FASTEST , X dummy_tfr_2 , X overlap_INTR , X overlap_DMA , X overlap_FHS , X overlap_FASTEST , X OVERLAP ) ; X actual_tfr_type = ( no_tfr , X INTR_tfr , X DMA_tfr , X BURST_tfr , X FHS_tfr X ) ; X dir_of_tfr = ( to_memory, X from_memory X ) ; X X buf_type = PACKED ARRAY[0..maxint] OF CHAR; X X buf_info_type = RECORD X drv_tmp_ptr : pio_tmp_ptr; X active_isc : io_byte; X act_tfr : actual_tfr_type ; X usr_tfr : user_tfr_type ; X b_w_mode : BOOLEAN ; X end_mode : BOOLEAN ; X direction : dir_of_tfr ; X term_char : -1..255 ; X term_count : INTEGER ; X buf_ptr : ^buf_type ; X buf_size : INTEGER ; X buf_empty : ANYPTR ; X buf_fill : ANYPTR ; X eot_proc : io_funny_proc; X eot_parm : ANYPTR ; X dma_priority: BOOLEAN; X END; X X VAR X dma_ch_0 : io_funny_proc ; X dma_isc_0 : io_byte ; X dma_ch_1 : io_funny_proc ; X dma_isc_1 : io_byte ; X dma_isrib0 : ISRIB ; X dma_isrib1 : ISRIB ; X dma_here : BOOLEAN; X X io_work_char : CHAR; X X ioe_result : INTEGER; X ioe_isc : INTEGER; X X isc_table : PACKED ARRAY [type_isc] X OF isc_table_type; X X io_revid : STRING[96]; X X io_error_link : errlnk_type; X X PROCEDURE io_escape ( my_code : INTEGER ; select_code: INTEGER); X FUNCTION io_find_isc ( iod_temp : ANYPTR ): io_byte; XEND. X END_OF_FILE if test 11318 -ne `wc -c <'HP/import/iodecl.imp'`; then echo shar: \"'HP/import/iodecl.imp'\" unpacked with wrong size! fi # end of 'HP/import/iodecl.imp' fi if test -f 'HP/include/sysdevs.h' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'HP/include/sysdevs.h'\" else echo shar: Extracting \"'HP/include/sysdevs.h'\" $12249 characters$ sed "s/^X//" >'HP/include/sysdevs.h' <<'END_OF_FILE' X/* Header for module SYSDEVS, generated by p2c */ X#ifndef SYSDEVS_H X#define SYSDEVS_H X X X X#ifndef SYSGLOBALS_H X#include <p2c/sysglobals.h> X#endif X X X X#ifdef SYSDEVS_G X# define vextern X#else X# define vextern extern X#endif X X X X/** DUMMY DECLARATIONS ***********************************/ X/** CRT **************************************************/ X/****** THIS SECTION HAS HARD OFFSET REFERENCES **********/ X/* IN MODULES CRTB (ASSY FILE GASSM) */ X X X X/* 3/25/85 */ X/* 3/25/85 */ X/*built in crt*/ X/* CRT CONTROL CHARS */ X/* CRT INFO & INPUT CHARS */ X Xtypedef union CRTWORD { X struct { X Char HIGHLIGHTBYTE, CHARACTER; X } U1; X short WHOLEWORD; X} CRTWORD; X Xtypedef enum { X CLLPUT, CLLSHIFTL, CLLSHIFTR, CLLCLEAR, CLLDISPLAY, PUTSTATUS X} CRTLLOPS; X Xtypedef enum { X DBINFO, DBEXCG, DBGOTOXY, DBPUT, DBINIT, DBCLEAR, DBCLINE, DBSCROLLUP, X DBSCROLLDN, DBSCROLLL, DBSCROLLR, DBHIGHL X} DBCRTOPS; X Xtypedef struct DBCINFO { X Char *SAVEAREA; X long SAVESIZE, DCURSORADDR; X short XMIN, XMAX, YMIN, YMAX, CURSX, CURSY; X Char C; X boolean AREAISDBCRT, CHARISMAPPED; X short DEBUGHIGHLIGHT; X} DBCINFO; X Xtypedef uchar crtconsttype[12]; X Xtypedef struct crtfrec { X unsigned nobreak : 1, stupid : 1, slowterm : 1, hasxycrt : 1, X haslccrt : 1, hasclock : 1, canupscroll : 1, candownscroll : 1; X} crtfrec; X Xtypedef unsigned short b9; X Xtypedef unsigned short b14; X Xtypedef struct crtcrec { X Char rlf, ndfs, eraseeol, eraseeos, home, escape, backspace; X uchar fillcount; X Char clearscreen, clearline; X unsigned short prefixed; X} crtcrec; X Xtypedef struct crtirec { X short width, height; X long crtmemaddr, crtcontroladdr, keybufferaddr, progstateinfoaddr; X short keybuffersize; X crtconsttype crtcon; X Char right, left, down, up, badch, chardel, stop, break_, flush, eof, X altmode, linedel, backspace, etx, prefix; X unsigned short prefixed; X long cursormask, spare; X} crtirec; X Xtypedef struct environ { X crtfrec miscinfo; X long crttype; X crtcrec crtctrl; X crtirec crtinfo; X} environ; X Xtypedef enum { X NOCRT, ALPHATYPE, BITMAPTYPE, SPECIALCRT1, SPECIALCRT2 X} crtkinds; X X X X/* CURSOR X POSITION */ X/* CURSOR Y POSITION */ X/* ACTIVE ALPHA DRIVER TYPE */ X/* ADDRESS OF BITMAP CONTROL SPACE */ X/* ADDRESS OF BITMAP FRAME BUFFER */ X/* REGISTER COPIES FOR BITMAP DISPLAY */ X/* MUST BE IN GLOBALS BECAUSE REGISTERS */ X/* ARE NOT READABLE -- MAY BE UNDEFINED */ X/** KEYBOARD ********************************************/ X#define KBD_ENABLE 0 X#define KBD_DISABLE 1 X#define SET_AUTO_DELAY 2 X#define SET_AUTO_REPEAT 3 X#define GET_AUTO_DELAY 4 X#define GET_AUTO_REPEAT 5 X#define SET_KBDTYPE 6 X#define SET_KBDLANG 7 X X X X/*ADDED FOR 3.1--SFB-5/22/85*/ X Xtypedef enum { X NOKBD, LARGEKBD, SMALLKBD, ITFKBD, SPECIALKBD1, SPECIALKBD2 X} KEYBOARDTYPE; X Xtypedef enum { X NO_KBD, FINISH_KBD, BELGIAN_KBD, CDN_ENG_KBD, CDN_FR_KBD, NORWEGIAN_KBD, X DANISH_KBD, DUTCH_KBD, SWISS_GR_KBD, SWISS_FR_KBD, SPANISH_EUR_KBD, X SPANISH_LATIN_KBD, UK_KBD, ITALIAN_KBD, FRENCH_KBD, GERMAN_KBD, X SWEDISH_KBD, SPANISH_KBD, KATAKANA_KBD, US_KBD, ROMAN8_KBD, NS1_KBD, X NS2_KBD, NS3_KBD, SWISS_GR_B_KBD, SWISS_FR_B_KBD X} LANGTYPE; X Xtypedef enum { X M_NONE, M_SYSNORM, M_SYSSHIFT, M_U1, M_U2, M_U3, M_U4 X} MENUTYPE; X X X X/* KEYBOARD CONFIGURATION JUMPER */ X/** ENABLE / DISABLE *************************************/ X#define KBDMASK 1 X#define RESETMASK 2 X#define TIMERMASK 4 X#define PSIMASK 8 X#define FHIMASK 16 X X X X/* ENABLE, DISABLE */ X/** BEEPER ***********************************************/ X/** RPG **************************************************/ X#define RPG_ENABLE 0 X#define RPG_DISABLE 1 X#define SET_RPG_RATE 2 X#define GET_RPG_RATE 3 X X X X/** BATTERY **********************************************/ X X X X/** CLOCK ************************************************/ X/*CUPDATE ADDED FOR BOBCAT 4/11/85 SFB*/ X Xtypedef struct RTCTIME { X long PACKEDTIME, PACKEDDATE; X} RTCTIME; X Xtypedef enum { X CGETDATE, CGETTIME, CSETDATE, CSETTIME X} CLOCKFUNC; X Xtypedef enum { X CGET, CSET, CUPDATE X} CLOCKOP; X Xtypedef union CLOCKDATA { X timerec TIMETYPE; X daterec DATETYPE; X} CLOCKDATA; X X X X/* CLOCK MODULE INTERFACE */ X/* CARD DRIVER INTERFACE */ X/** TIMER ************************************************/ X Xtypedef enum { X CYCLICT, PERIODICT, DELAYT, DELAY7T, MATCHT X} TIMERTYPES; X Xtypedef enum { X SETT, READT, GETTINFO X} TIMEROPTYPE; X Xtypedef union TIMERDATA { X long COUNT; X timerec MATCH; X struct { X long RESOLUTION, RANGE; X } U2; X} TIMERDATA; X X X X/** KEYBUFFER ********************************************/ X#define KMAXBUFSIZE 255 X X X Xtypedef enum { X KGETCHAR, KAPPEND, KNONADVANCE, KCLEAR, KDISPLAY, KGETLAST, KPUTFIRST X} KOPTYPE; X Xtypedef Char KBUFTYPE[KMAXBUFSIZE + 1]; X Xtypedef struct KBUFREC { X boolean ECHO; X Char NON_CHAR; X long MAXSIZE, SIZE, INP, OUTP; X Char *BUFFER; X} KBUFREC; X X X X/*0 s or f = STEP/FLASH IN PROGRESS (WAITING FOR TRAP #0)*/ X/*1..5 last executed/current line number */ X/*6 S=SYSTEM U=USER DEFINITION FOR ITF SOFT KEYS*/ X/* BLANK FOR NON ITF KEYBOARDS */ X/*7 RUNLIGHT */ X/** KEY TRANSLATION SERVICES *********************************/ X/* ADDED NONA_ALPHA_KEY 5/9/84 RQ/SFB */ X Xtypedef enum { X KPASSTHRU, KSHIFT_EXTC, KPASS_EXTC X} KEYTRANSTYPE; X Xtypedef enum { X ALPHA_KEY, NONADV_KEY, SPECIAL_KEY, IGNORED_KEY, NONA_ALPHA_KEY X} KEYTYPE; X Xtypedef struct LANGCOMREC { X uchar STATUS, DATA; X Char KEY; X KEYTYPE RESULT; X boolean SHIFT, CONTROL, EXTENSION; X} LANGCOMREC; X Xtypedef struct LANGKEYREC { X boolean NO_CAPSLOCK, NO_SHIFT, NO_CONTROL, NO_EXTENSION; X KEYTYPE KEYCLASS; X Char KEYS[2]; X} LANGKEYREC; X Xtypedef struct LANGRECORD { X boolean CAN_NONADV; X LANGTYPE LANGCODE; X _PROCEDURE SEMANTICS; X LANGKEYREC KEYTABLE[128]; X} LANGRECORD; X X X X/** HPHIL ************************************************/ X/*MOVED INTO SYSDEVS 4/6/84 SFB*/ X#define le_configured 0x80 X#define le_error 0x81 X#define le_timeout 0x82 X#define le_loopdown 0x84 X#define lmaxdevices 7 X X X X/*UNINIT ADDED 4/8/85 SFB*/ X/*HPHILOP DEFINED AS NEW TYPE 4/6/84 SFB*/ X/*5 PROCEDURES HOOKED AS TYPE HPHILCMDPROC 4/6/84 SFB*/ X/* DEVICE DESCRIBE RECORD */ X/* reserved : 0..3; {DELETED 3/25/85 SFB*/ X/*3/27/85 SFB*/ X/*3/26/85 SFB*/ X/*ADDED 3/15/85 SFB*/ X/*ADDED 3/15/85 SFB*/ X/*REDEFINED AS RECORD - 4/6/84 SFB*/ X/* last loop command sent */ X/* data bye in / out */ X/* error occured on last operation */ X/* now doing reconfigure */ X/* last sent command is done */ X/* loop is configured */ X/* reading poll data */ X/* 3.0 BUG #39 3/17/84 */ X Xtypedef enum { X datastarting, dataended, resetdevice, uninitdevice X} loopdvrop; X Xtypedef enum { X RAWSHIFTOP, NORMSHIFTOP, CHECKLOOPOP, CONFIGUREOP, LCOMMANDOP X} HPHILOP; X Xtypedef union descriprec { X struct { X uchar id; X unsigned twosets : 1, abscoords : 1, size16 : 1, hasprompts : 1, X ext_desc : 1, security : 1, numaxes : 2; X Signed int counts : 16, maxcountx : 16, maxcounty : 16, X maxcountz : 16; X unsigned promptack : 1, nprompts : 3, proximity : 1, nbuttons : 3; X } U1; X Char darray[11]; X} descriprec; X Xtypedef struct devicerec { X long devstate; X descriprec descrip; X _PROCEDURE opsproc; X _PROCEDURE dataproc; X} devicerec; X Xtypedef struct loopdriverrec { X uchar lowid, highid, daddr; X _PROCEDURE opsproc; X _PROCEDURE dataproc; X struct loopdriverrec *next; X} loopdriverrec; X Xtypedef struct LOOPCONTROLREC { X boolean rawmode; X devicerec loopdevices[lmaxdevices]; X char loopdevice; X uchar loopcmd, loopdata; X boolean looperror, loopinconfig, loopcmddone, loopisok, loopdevreading; X} LOOPCONTROLREC; X X X X/*NEW TO END OF HPHIL_COMM_REC TYPE 3/26/85 SFB*/ X/*DRIVER TYPES*/ X#define NODRIVER 0 X#define ABSLOCATOR 1 X X/*range 1..15 reserved for DGL*/ X/*CODETYPES FROM POLLBLOCK (OR OTHER HPHIL OPCODE)*/ X#define NOCODES 0 X#define ASCIICODES 1 X#define SET1CODES 2 X#define SET2CODES 3 X X X X/*3/25/85 SFB*/ X/*3/25/85 SFB*/ X/*stop updating data after button press/event*/ X/*capture data in ISR*/ X/*dvr_comm_rec busy, delay update from ISR*/ X/*bit/loopaddress that driver should service */ X/* put 0 where driver should NOT service device */ X/* with this dvr_comm_rec !*/ X/*call update to flush delayed poll data update*/ X/*next comm record*/ X/*for extensibility use as pointer/datarec*/ X/*HPHIL intrinsic data types from poll/command*/ X/*describes content of codes*/ X/*extensible for variant*/ X Xtypedef union HPHIL_COMM_REC_TYPE { X struct { X short dvr_type; X char dev_addr; X boolean latch, active, reading; X uchar devices; X _PROCEDURE update; X union HPHIL_COMM_REC_TYPE *link; X long extend; X short xloc, yloc, zloc, codetype, ncodes; X Char codes[16]; X } U1; X Char barray[54]; X} HPHIL_COMM_REC_TYPE; X X X Xvextern environ *SYSCOM; Xvextern boolean ALPHASTATE, GRAPHICSTATE; Xvextern _PROCEDURE CRTIOHOOK; Xvextern _PROCEDURE TOGGLEALPHAHOOK; Xvextern _PROCEDURE TOGGLEGRAPHICSHOOK; Xvextern _PROCEDURE DUMPALPHAHOOK; Xvextern _PROCEDURE DUMPGRAPHICSHOOK; Xvextern _PROCEDURE UPDATECURSORHOOK; Xvextern _PROCEDURE CRTINITHOOK; Xvextern _PROCEDURE CRTLLHOOK; Xvextern _PROCEDURE DBCRTHOOK; Xvextern short XPOS, YPOS; Xvextern crtkinds CURRENTCRT; Xvextern long BITMAPADDR, FRAMEADDR; Xvextern short REPLREGCOPY, WINDOWREGCOPY, WRITEREGCOPY; Xvextern _PROCEDURE KBDREQHOOK; Xvextern _PROCEDURE KBDIOHOOK; Xvextern _PROCEDURE KBDISRHOOK; Xvextern _PROCEDURE KBDPOLLHOOK; Xvextern KEYBOARDTYPE KBDTYPE; Xvextern uchar KBDCONFIG; Xvextern LANGTYPE KBDLANG; Xvextern Char *SYSMENU, *SYSMENUSHIFT; Xvextern MENUTYPE MENUSTATE; Xvextern _PROCEDURE MASKOPSHOOK, BEEPERHOOK; Xvextern uchar BFREQUENCY, BDURATION; Xvextern _PROCEDURE RPGREQHOOK; Xvextern _PROCEDURE RPGISRHOOK; Xvextern boolean BATTERYPRESENT; Xvextern _PROCEDURE BATCMDHOOK; Xvextern _PROCEDURE BATREADHOOK; Xvextern _PROCEDURE CLOCKREQHOOK; Xvextern _PROCEDURE CLOCKIOHOOK; Xvextern _PROCEDURE TIMERIOHOOK; Xvextern _PROCEDURE TIMERISRHOOK; Xvextern KBUFREC *KEYBUFFER; Xvextern _PROCEDURE KBDWAITHOOK; Xvextern _PROCEDURE KBDRELEASEHOOK; Xvextern Char STATUSLINE[8]; Xvextern LANGCOMREC LANGCOM; Xvextern LANGRECORD *LANGTABLE[2]; Xvextern char LANGINDEX; Xvextern _PROCEDURE KBDTRANSHOOK; Xvextern KEYTRANSTYPE TRANSMODE; Xvextern boolean KBDSYSMODE, KBDALTLOCK, KBDCAPSLOCK; Xvextern loopdriverrec *loopdriverlist; Xvextern LOOPCONTROLREC *LOOPCONTROL; Xvextern _PROCEDURE HPHILCMDHOOK; Xvextern HPHIL_COMM_REC_TYPE *HPHIL_DATA_LINK; X X X X/*4/6/84 SFB*/ X/*4/6/84 SFB*/ X/*3/13/85 SFB*/ X/*-----------------------------------------------------------------------------*/ Xextern Void SYSDEV_INIT PV( ); X X/** BEEPER ***********************************************/ Xextern Void BEEP PV( ); Xextern Void BEEPER PP((int FREQUENCY, int DURATION)); X X/** RPG **************************************************/ Xextern Void SETRPGRATE PP((int RATE)); X X/** KEYBOARD *********************************************/ Xextern Void KBDSETUP PP((int CMD, int VALUE)); Xextern Void KBDIO PP((fib *FP, int REQUEST, Char *BUFFER, long BUFSIZE, X long POSITION)); Xextern Void lockedaction PP((_PROCEDURE a)); X X/** CRT **************************************************/ Xextern Void CRTIO PP((fib *FP, int REQUEST, Char *BUFFER, long BUFSIZE, X long POSITION)); Xextern Void DUMMYCRTLL PP((int OP, long *POSITION, int C)); X X/** BATTERY **********************************************/ Xextern Void BATCOMMAND PP((int CMD, long NUMDATA, int B1, int B2, int B3, X int B4, int B5)); Xextern uchar BATBYTERECEIVED PV( ); X X/** CLOCK ************************************************/ Xextern long sysclock PV( ); X X/*centiseconds from midnight*/ Xextern Void sysdate PP((daterec *thedate)); Xextern Void systime PP((timerec *thetime)); Xextern Void setsysdate PP((daterec thedate)); Xextern Void setsystime PP((timerec thetime)); X X/** KEYBUFFER ********************************************/ Xextern Void KEYBUFOPS PP((int OP, Char *C)); X X/** STATUSLINE *******************************************/ Xextern Void SETSTATUS PP((long N, int C)); Xextern Char RUNLIGHT PV( ); Xextern Void SETRUNLIGHT PP((int C)); X X X X#undef vextern X X#endif /*SYSDEVS_H*/ X X/* End. */ X END_OF_FILE if test 12249 -ne `wc -c <'HP/include/sysdevs.h'`; then echo shar: \"'HP/include/sysdevs.h'\" unpacked with wrong size! fi # end of 'HP/include/sysdevs.h' fi if test -f 'examples/basic.doc' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'examples/basic.doc'\" else echo shar: Extracting \"'examples/basic.doc'\" $11310 characters$ sed "s/^X//" >'examples/basic.doc' <<'END_OF_FILE' X X Chipmunk BASIC 1.0 X David Gillespie X X X -------------------------------------------------------------- X X X X X COMMANDS X X X LIST line(s) X X List the specified program lines. For example, X X LIST 10, 100-200 X X lists line 10, and lines 100 through 200, inclusive. X X X RUN [line] X X Begin execution of the program at the first line, or at the X specified line. All variables are cleared. X X X RUN file[,line] X X Load and run a program. For example, X X RUN "FOO", 30 X X loads a program from the file FOO.TEXT and begins execution at X line 30. X X X NEW X X Erase the program in memory. X X X LOAD file X X Load a program into memory. The program previously in memory is X erased. The file name should be in quotes; a .TEXT extension is X automatically added. Files contain ASCII listings of the programs. X All lines in the file must begin with a line number, but line X numbers do not need to be in increasing order. X X X MERGE file X X Load a program into memory. The previous program remains in X memory; if a line exists in both programs, the newly loaded X line is kept. X X X SAVE file X X Save the program in memory to a file. X X X BYE X X Return to the operating system. X X X DEL line(s) X X Delete the specified program lines. Line numbers may be X separated by commas and dashes as in LIST. If used inside X a program, DEL will terminate execution only if it deletes X the line on which it appears. X X X RENUM [start[,inc]] X X Renumber program lines. By default, the new sequence is 10,20,30,... X The first argument is a new initial line number; the second argument X is the increment between line numbers. X X X X X STATEMENTS X X REM comment X X A remark; ignored. Comments may contain any characters except X that REM can not be immediately followed by an alphanumeric X character. X X X [LET] var = expr X X Assign a value to a variable. Variable names contain up to 20 X significant characters, consisting of upper- and lower-case X letters, digits, underscores, and dollar signs. Variable names X are case-sensitive. Variables hold real numbers normally, or X strings of up to 255 characters if their names end with $. X X Examples: X X LET X=20 X X$="FOO" X X$=X$+"BAR" X X X DIM var(dimensions), ... X X Allocate memory for arrays. Arrays may have up to 4 dimensions, X ranging from 0 to the value specified in the DIM statement. X The same name must not be used for both a simple variable and X an array. X X If an array is used before it is dimensioned, each dimension X is set to 10. X X Example: X X INPUT "How many elements? "; x X DIM array(x,1) X FOR i=1 TO x : INPUT array(i,0), array(i,1) : NEXT X X X PRINT items X X Print the items on the screen. Items may be either numeric X or string expressions, and may be separated by commas, semicolons, X or nothing. X X Numbers are normally terminated by spaces. To avoid this space, X convert the number to a string with STR$. X X The line is terminated by a CR/LF, unless the item list ends X with a comma or semicolon. X X The word PRINT may be abbreviated as a question mark. X X Examples: X X PRINT "1+2=", 1+2 X PRINT X$ "=" Z$; X ? x; y+z X X X INPUT [prompt;] vars X X If a prompt string is given, it is printed. Otherwise, a X question mark is printed. The computer then waits for values X for each variable to be entered. If several variables are X listed, their names must be separated by commas. X X If the variables are numeric, their values may be entered X on separate lines, or combined with commas. Any numeric expression X is a valid response. X X If the variables are strings, each string is typed on a separate X line. The characters typed are copied verbatim into the string. X X String and numeric variables may be not mixed in a single X INPUT statement. X X Examples: X X INPUT X$ X INPUT "Type 3 numbers: "; X, Y, Z X X X GOTO line X X Begin executing statements at the specified line. The line X number may be any numeric expression. X X The word GO TO may be used instead of GOTO if preferable. X X X IF condition THEN line/statements ELSE line/statements X X If the condition is true (i.e., the numeric expression has a X non-zero value), the statements following the word THEN are X executed. Otherwise, the statements following ELSE are X executed. If there is no ELSE clause, execution proceeds X to the next line in the program. X X A line number may be used after either THEN or ELSE, for an X implied GOTO statement. X X X END X X Terminate the program. An END statement is not required. X X X STOP X X Terminate the program with an identifying "Break" message. X X X FOR var = first TO last [STEP inc] X {statements} X NEXT [var] X X Execute {statements} repeatedly while the variable counts from X "first" to "last," incrementing by 1, or by the STEP value if X given. If the STEP value is negative, the variable counts X downward. X X If "first" is greater than "last" (or less than if STEP is X negative), execution proceeds directly to the NEXT statement, X without executing the body of the loop at all. X X The variable name is optional on the NEXT statement. X X X WHILE [condition] X {statements} X WEND [condition] X X Execute {statements} repeatedly until the WHILE condition (if X given) becomes false, or until the WEND condition becomes true. X This structure can emulate Pascal's WHILE-DO and REPEAT-UNTIL, X or even both at once. If no conditions are given, the loop will X never terminate unless the Evil GOTO is used. X X X GOSUB line X RETURN X X Execute the statements beginning at the specified line, then X when RETURN is reached, return to the statement following the X GOSUB. X X X READ vars X DATA values X RESTORE line X X Read numeric or string values from the DATA statements. Reading X begins at the first DATA statement in the program and proceeds X to the last. Reading past the end the last DATA statement X generates an error. X X The DATA values must be either numeric or string expressions, X according to the type of variable being read. Reading the wrong X kind of expression produces a Syntax Error. X X The RESTORE statement causes the next READ to re-use the first X DATA statement in the program, or the first DATA statement on X or after a particular line. X X X GOTOXY across, down X X Move the cursor to the specified screen position, between X 0,0 and 79,23. X X X ON expr GOTO line, line, ... X ON expr GOSUB line, line, ... X X If the expression's value, rounded to an integer, is N, go to X the Nth line number in the list. If N is less than one or is X too large, execution continues at the next statement after X the ON-GOTO or ON-GOSUB. X X X POKE addr, data X X Store a byte at the specified address. X X X X X NUMERIC EXPRESSIONS X X x AND y X X Logical AND of two integers. X X X x OR y X X Logical OR of two integers. X X X x XOR y X X Logical XOR of two integers. X X X NOT x X X Logical complement of an integer. X X X x+y, x-y, x*y, x/y, x^y, -x X X Typical floating-point arithmetic operations. X X X x=y, x<y, x>y, x<=y, x>=y, x<>y X X Comparisons; result is 1 if true, 0 if false. X X X x MOD y X X Modulo of two integers. X X X SQR x X X Square of X. Note that parentheses are not required if a function's X argument is a single entitity; for example, SQR SIN X needs no X parentheses, but SQR(1+X) does. X X X SQRT x X X Square root of X. X X X SIN x, COS x, TAN x, ARCTAN x X X Typical trig functions, in radians. X X X LOG x, EXP x X X Natural logarithm, and e the power X. X X X ABS x X X Absolute value of X. X X X SGN x X X Sign of X: 1 if X is positive, 0 if zero, -1 if negative. X X X VAL x$ X X Value of the expression contained in the string X$. For example, X VAL "1+2" yields 3. X$ may be a single string literal, variable, X or function, or a string expression in parentheses. X X X ASC x$ X X ASCII code of the first character in X$, or 0 if X$ is null. X X X LEN x$ X X Number of characters in X$. X X X Precedence: Parentheses X Functions (incl. NOT and unary minus) X ^ X *, /, MOD X +, - X =, <, >, <=, >=, <> X AND X OR, XOR X X X X STRING EXPRESSIONS X X "string" or 'string' X X String literal. Single quotes are converted to double quotes X internally. X X X x$+y$ X X Concatenation. Result must be 255 characters or less. X X X x$=y$, x$<y$, x$>y$, x$<=y$, x$>=y$, x$<>y$ X X String comparisons; result is 1 if true, 0 if false. X X X STR$(x) X X The number X expressed as a string of digits. No leading or X trailing spaces are included; scientific notation is used X if the absolute values is greater than 1E12 or less than 1E-2. X X X CHR$(x) X X The character whose ASCII code is X. X X X MID$(x$, y) X MID$(x$, y, z) X X (Parentheses required.) The substring consisting of the first X Z characters starting at position Y of string X$. Position 1 X is the first character of the string. If Z is omitted, 255 X is used, i.e., the entire right part of the string. X X X X CONVENTIONS X X Multiple statements may be written on a line, separated by colons: X X 10 INPUT X : PRINT X : STOP X X X There is actually no difference between commands and statements; X both can be used in or out of programs at will. Certain commands, X such as NEW, will, of course, halt program execution. X X X Line numbers may be any integer from 1 to MAXINT. X X X To delete a line use DEL, or type its line number alone: X X 10 X X X Press CLR I/O to halt program execution. [This is not supported X by p2c's translation!] To leave BASIC, use the BYE command. X X X Keywords must be written in all upper- or all lower-case; they are X always converted to upper-case internally. Spaces are ignored in X the input except between quotes. Square brackets are converted to X parentheses. Missing closing quotes at the end of the line are X added, as in the command: X X SAVE "PROGRAM X X X X END_OF_FILE if test 11310 -ne `wc -c <'examples/basic.doc'`; then echo shar: \"'examples/basic.doc'\" unpacked with wrong size! fi # end of 'examples/basic.doc' fi if test -f 'examples/cref.p' -a "${1}" != "-c" ; then echo shar: Will not clobber existing file \"'examples/cref.p'\" else echo shar: Extracting \"'examples/cref.p'\" $11280 characters$ sed "s/^X//" >'examples/cref.p' <<'END_OF_FILE' X X$debug$ X$ sysprog, partial_eval $ X Xprogram crefprog(input, output); X X Xconst X { linesperpage = 139; } X maxnamelen = 30; X X Xtype X str255 = string[255]; X X occurptr = ^occur; X occur = X record X next : occurptr; X lnum : integer; X fnum : integer; X defn : boolean; X end; X X kinds = (k_normal, k_proc, k_var, k_const, k_type, k_strlit, k_extproc, X k_kw, k_prockw, k_varkw, k_constkw, k_typekw, k_beginkw); X X nodeptr = ^node; X node = X record X left, right : nodeptr; X name : string[maxnamelen]; X first : occurptr; X kind : kinds; X end; X X Xvar X f : text; X fn : string[120]; X fnum : integer; X buf, name : str255; X good : boolean; X i, j : integer; X lnum : integer; X np, base : nodeptr; X op : occurptr; X curkind, section : kinds; X paren : integer; X brace : integer; X X X Xprocedure lookup(var name : str255; var np : nodeptr); X var X npp : ^nodeptr; X begin X if strlen(name) > maxnamelen then X setstrlen(name, maxnamelen); X npp := addr(base); X while (npp^ <> nil) and (npp^^.name <> name) do X begin X if name < npp^^.name then X npp := addr(npp^^.left) X else X npp := addr(npp^^.right); X end; X if (npp^ = nil) then X begin X new(np); X npp^ := np; X np^.name := name; X np^.first := nil; X np^.left := nil; X np^.right := nil; X np^.kind := k_normal; X end X else X np := npp^; X end; X X Xprocedure kw(name : str255; kind : kinds); X var X np : nodeptr; X begin X lookup(name, np); X np^.kind := kind; X end; X X Xprocedure cref(np : nodeptr; kind : kinds); X var X op : occurptr; X begin X new(op); X op^.next := np^.first; X np^.first := op; X op^.lnum := lnum; X op^.fnum := fnum; X op^.defn := (kind in [k_var, k_type, k_const, k_proc]); X if op^.defn or (kind = k_strlit) or X ((kind = k_extproc) and (np^.kind = k_normal)) then X np^.kind := kind; X end; X X X Xprocedure traverse(np : nodeptr); X var X op : occurptr; X i : integer; X begin X if (np <> nil) then X begin X traverse(np^.left); X if np^.kind < k_kw then X begin X case np^.kind of X k_var: X write(f, 'V:'); X k_type: X write(f, 'T:'); X k_const: X write(f, 'C:'); X k_proc: X write(f, 'P:'); X k_strlit: X write(f, 'S:'); X k_extproc: X write(f, 'E:'); X k_normal: X write(f, 'X:'); X end; X write(f, np^.name); X i := 0; X op := np^.first; X while op <> nil do X begin X if i = 0 then X begin X writeln(f); X write(f, ' '); X i := 5; X end; X write(f, ' ', op^.lnum:1, '/', op^.fnum:1); X if op^.defn then X write(f, '*'); X i := i - 1; X op := op^.next; X end; X writeln(f); X end; X traverse(np^.right); X end; X end; X X X Xbegin X base := nil; X fnum := 0; X kw('procedure', k_prockw); X kw('function', k_prockw); X kw('var', k_varkw); X kw('record', k_varkw); X kw('type', k_typekw); X kw('const', k_constkw); X kw('begin', k_beginkw); X kw('end', k_kw); X kw('do', k_kw); X kw('for', k_kw); X kw('to', k_kw); X kw('while', k_kw); X kw('repeat', k_kw); X kw('until', k_kw); X kw('if', k_kw); X kw('then', k_kw); X kw('else', k_kw); X kw('case', k_kw); X kw('of', k_kw); X kw('div', k_kw); X kw('mod', k_kw); X kw('nil', k_kw); X kw('not', k_kw); X kw('and', k_kw); X kw('or', k_kw); X kw('with', k_kw); X kw('array', k_kw); X kw('integer', k_kw); X kw('char', k_kw); X kw('boolean', k_kw); X kw('true', k_kw); X kw('false', k_kw); X writeln; X writeln('Pascal Cross Reference Utility'); X writeln; X repeat X fnum := fnum + 1; X write('Name of cross-reference file #', fnum:1, '? '); X readln(fn); X good := true; X if (fn <> '') then X begin X try X reset(f, fn); X recover X if escapecode <> -10 then X escape(escapecode) X else X begin X good := false; X writeln('Can''t read file!'); X end; X end X else X good := false; X if good then X begin X lnum := 0; X section := k_normal; X curkind := k_normal; X paren := 0; X while not eof(f) do X begin X lnum := lnum + 1; X readln(f, buf); X strappend(buf, #0); X i := 1; X while (buf[i] = ' ') do X i := i + 1; X repeat X while not (buf[i] in ['a'..'z', 'A'..'Z', '0'..'9', '_', #0]) do X begin X case buf[i] of X ':', '=': X if brace = 0 then X curkind := k_normal; X ';': X if brace = 0 then X curkind := section; X '''': X if brace = 0 then X begin X i := i + 1; X j := i; X while ((buf[i] <> '''') or (buf[i+1] = '''')) and X (buf[i] <> #0) do X begin X if (buf[i] = '''') then X i := i + 2 X else X i := i + 1; X end; X if (buf[i] = #0) then X i := i - 1; X name := '''' + str(buf, j, i-j) + ''''; X lookup(name, np); X cref(np, k_strlit); X end; X '(': X if brace = 0 then X if (buf[i+1] = '*') then X begin X brace := 1; X i := i + 1; X end X else X begin X paren := paren + 1; X curkind := k_normal; X end; X ')': X if brace = 0 then X paren := paren - 1; X '*': X if (buf[i+1] = ')') then X begin X brace := 0; X i := i + 1; X end; X '{': brace := 1; X '}': brace := 0; X otherwise ; X end; X i := i + 1; X end; X if (buf[i] <> #0) then X begin X j := i; X if (buf[i] in ['0'..'9']) and (i > 1) and (buf[i-1] = '-') then X j := j - 1; X while (buf[i] in ['a'..'z', 'A'..'Z', '0'..'9', '_']) do X i := i + 1; X if brace = 0 then X begin X name := str(buf, j, i-j); X for j := 1 to strlen(name) do X if (buf[j] in ['A'..'Z']) then X buf[j] := chr(ord(buf[j]) + 32); X while (buf[i] = ' ') do X i := i + 1; X lookup(name, np); X case np^.kind of X k_varkw: X if paren = 0 then X begin X section := k_var; X curkind := section; X end; X k_typekw: X begin X section := k_type; X curkind := section; X end; X k_constkw: X begin X section := k_const; X curkind := section; X end; X k_prockw: X begin X section := k_normal; X curkind := k_proc; X end; X k_beginkw: X begin X section := k_normal; X curkind := k_normal; X end; X k_kw: ; X otherwise X if (curkind = k_normal) and (buf[i] = '(') then X cref(np, k_extproc) X else X cref(np, curkind); X end; X end; X end; X until buf[i] = #0; X end; X if paren <> 0 then X writeln('Warning: ending paren count = ', paren:1); X close(f); X end; X until fn = ''; X writeln; X repeat X write('Output file name: '); X readln(fn); X until fn <> ''; X rewrite(f, fn); X traverse(base); X close(f, 'save'); Xend. X X X X END_OF_FILE if test 11280 -ne `wc -c <'examples/cref.p'`; then echo shar: \"'examples/cref.p'\" unpacked with wrong size! fi # end of 'examples/cref.p' fi echo shar: End of archive 4 $of 32$. cp /dev/null ark4isdone MISSING="" for I in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 ; do if test ! -f ark${I}isdone ; then MISSING="${MISSING} ${I}" fi done if test "${MISSING}" = "" ; then echo You have unpacked all 32 archives. echo "Now see PACKNOTES and the README" rm -f ark[1-9]isdone ark[1-9][0-9]isdone else echo You still need to unpack the following archives: echo " " ${MISSING} fi ## End of shell archive. exit 0